Implement PIE based congestion management based on rfc8033.
The Proportional Integral Controller Enhanced (PIE) algorithm works
by proactively dropping packets randomly.
PIE is implemented as more advanced queue management is required to
address the bufferbloat problem and provide desirable quality of
service to users.
Tests for PIE code added to test application.
Added PIE related information to documentation.
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This patch adds a new parameter to the FIB configuration to specify
the size of the extension for internal RIB structure.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
Seen by ASan.
In the external buffer mbuf test, we check that the buffer is freed
by checking that its refcount is 0.
This is not a valid condition, because it accesses to an already
freed area.
Fix this by setting a boolean flag in the callback when rte_free()
is actually called, and check this flag instead.
Bugzilla ID: 867
Fixes: 7b295dceea07 ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch adds performance tests for the following Toeplitz hash
function implementations:
Scalar:
- rte_softrss()
- rte_softrss_be()
Vector using gfni:
- rte_thash_gfni()
- rte_thash_gfni_bulk()
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch adds a bulk version for the Toeplitz hash implemented
with Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch add a new Toeplitz hash implementation using
Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Amount of locked memory for regular users is limited,
it is usually 64 KB by default.
Hitting this limit in rte_mempool_populate_anon()
resulted in not populating the mempool, and a test case failure:
EAL: Test assert test_mempool_events line 585 failed: Failed to populate mempool empty1: Success
test failed at test_mempool():1019
Test Failed
Decrease the amount of mapped anonymous memory to fit the limit.
While there, make all function-local constants lowercase.
Fixes: 11541c5c81dd ("mempool: add non-IO flag")
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
FreeBSD EAL does not implement rte_mem_virt2iova() causing an error:
EAL: Test assert test_mempool_flag_non_io_unset_when_populated_with_valid_iova
line 781 failed: Cannot get IOVA
test failed at test_mempool():1030
Test Failed
Change unit test to use rte_memzone_reserve() to allocate memory,
which allows to obtain IOVA directly.
Bugzilla ID: 863
Fixes: 11541c5c81dd ("mempool: add non-IO flag")
Reported-by: Yu Jiang <yux.jiang@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
(bitratestats_autotest|latencystats_autotest|pdump_autotest) tests
generate a log of error messages like that:
test_packet_forward() line 104: Error sending packet to port 0
Send pkts Failed
These tests use of app/test/sample_packet_forward.* code.
This code creates a portid from a ring, but doesn't properly
configure/start it.
The fix adds code to configure/start given port before usage.
Fixes: 7a0935239b9e ("ethdev: make fast-path functions to use new flat array")
Fixes: a52966cd48fd ("test: add helpers using ring PMD Rx/Tx")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Add a testcase to test launching of control threads.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Updating the interrupt testsuite to make use of interrupt
handle get set APIs.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
wrk_cmd variable is used to signal the worker thread to start
or stop the stress test loop. Relaxed barriers are used
to achieve the same.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Feifei Wang <feifei.wang2@arm.com>
When mempool had been created with RTE_MEMPOOL_F_NO_IOVA_CONTIG flag
but later populated with valid IOVA, RTE_MEMPOOL_F_NON_IO was unset,
while it should be kept. The unit test did not catch this
because rte_mempool_populate_default() it used was populating
with RTE_BAD_IOVA.
Keep setting RTE_MEMPOOL_NON_IO at an empty mempool creation
and add an assert for it in the unit test (remove the separate case).
Do not reset the flag if RTE_MEMPOOL_F_ON_IOVA_CONTIG is set.
Fixes: 11541c5c81dd ("mempool: add non-IO flag")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In layer argument test function, kvargs are parsed and checked without
free. This patch calls rte_kvargs_free() function to avoid memory leak.
Coverity issue: 373631
Fixes: a4975cd20dca ("test: add devargs test cases")
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
An autotest is added for the new chacha20_poly1305 PMD.
A new test case is also added for SGL test.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add extra ZUC-EIA3-256 and ZUC-EEA3-256 test vectors.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for auth parameters in the transform to verify if a test case is
supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for cipher parameters in the transform to verify if a test case
is supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
link bounding auto-test internally creates emulated ethdev.
Some tests change Rx/Tx functions of this emulated device on the fly:
by directly modifying rte_eth_dev fields and without doing stop/start
for these devices.
As now ethdev uses rte_eth_fp_ops[] for fast-path functions, these
direct changes doesn't make expected effect.
Fix the problem by guarding fast-path functions changes with
rte_eth_dev_stop()/rte_eth_dev_start().
Fixes: 7a0935239b9e ("ethdev: make fast-path functions to use new flat array")
Reported-by: Lewei Yang <leweix.yang@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Malloc cl in the cmdline_stdin_new function, so release in the
cmdline_stdin_exit function is logical, so that cl will not be
released alone.
Fixes: af75078fece3 ("first public release")
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Reviewed-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Zhihong Peng <zhihongx.peng@intel.com>
Hide struct rdline definition and some RDLINE_* constants in order
to be able to change internal buffer sizes transparently to the user.
Add new functions:
* rdline_new(): allocate and initialize struct rdline.
This function replaces rdline_init() and takes an extra parameter:
opaque user data for the callbacks.
* rdline_free(): deallocate struct rdline.
* rdline_get_history_buffer_size(): for use in tests.
* rdline_get_opaque(): to obtain user data in callback functions.
Remove rdline_init() function from library headers and export list,
because using it requires the knowledge of sizeof(struct rdline).
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
The pcap library emits classic BPF (32 bit) and is useful for
creating filter programs. The DPDK BPF library only implements
extended BPF (eBPF). Add an function to convert from old to
new.
The rte_bpf_convert function uses rte_malloc to put the resulting
program in hugepage shared memory so it can be passed from a
secondary process to a primary process.
The code to convert was originally done as part of the Linux
kernel implementation then converted to a userspace program.
See https://github.com/tklauser/filter2xdp
Both authors have agreed that it is allowable to create a modified
version of this code and license it with BSD license used by DPDK.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The BPF autotest is defined but not run automatically.
Since it is short, it should be added to the autotest suite.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Simple unit test that created pcapng file using API.
To run this test you need to have at least one device.
For example:
DPDK_TEST=pcapng_autotest ./build/app/test/dpdk-test -l 0-15 \
--no-huge -m 2048 --vdev=net_tap,iface=dummy
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
No need to expose rte_dma_devices out of the dmadev library.
Existing helpers should be enough, and inlines make use of
rte_dma_fp_objs.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
Added per queue buffer. To configure per queue event buffer size,
application sets rte_event_eth_rx_adapter_params::use_queue_event_buf
flag as true while using rte_event_eth_rx_adapter_create_with_params().
The per queue event buffer size is populated in
rte_event_eth_rx_adapter_queue_conf::event_buf_size and passed
to rte_event_eth_rx_adapter_queue_add().
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Currently event buffer is static array with a default size defined
internally.
To configure event buffer size from application,
rte_event_eth_rx_adapter_create_with_params() API is added which
takes struct rte_event_eth_rx_adapter_params to configure event
buffer size in addition other params. The event buffer size is
rounded up for better buffer utilization and performance. In case
of NULL params argument, default event buffer size is used.
Signed-off-by: Naga Harish K S V <s.v.naga.harish.k@intel.com>
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added rte_event_eth_rx_adapter_queue_conf_get() API to get rx queue
information - event queue identifier, flags for handling received packets,
scheduler type, event priority, polling frequency of the receive queue
and flow identifier in rte_event_eth_rx_adapter_queue_conf structure
Signed-off-by: Ganapati Kundapura <ganapati.kundapura@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Event crypto adapter spec does not mention about cryptodev start and
stop. Cryptodev attached to the adapter should be started before calling
crypto adapter start. Added the same in spec and test application.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Cores count has a direct impact on the time needed to complete unit
tests.
Currently, the core list used for unit test is enforced to "all cores on
the system" with no way for (CI) users to adapt it.
On the other hand, EAL default behavior (when no -c/-l option gets passed)
is to start threads on as many cores available in the process cpu
affinity.
Remove logic from meson: users can then select where to run the tests by
either running meson with a custom cpu affinity (using taskset/cpuset
depending on OS) or by passing a --test-args option to meson.
Example:
$ sudo meson test -C build --suite fast-tests -t 3 --test-args "-l 0-3"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
m->nb_seg must be reset on mbuf free whatever the value of m->next,
because it can happen that m->nb_seg is != 1. For instance in this
case:
m1 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m1, 500);
m2 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m2, 500);
rte_pktmbuf_chain(m1, m2);
m0 = rte_pktmbuf_alloc(mp);
rte_pktmbuf_append(m0, 500);
rte_pktmbuf_chain(m0, m1);
As rte_pktmbuf_chain() does not reset nb_seg in the initial m1
segment (this is not required), after this code the mbuf chain
have 3 segments:
- m0: next=m1, nb_seg=3
- m1: next=m2, nb_seg=2
- m2: next=NULL, nb_seg=1
Then split this chain between m1 and m2, it would result in 2 packets:
- first packet
- m0: next=m1, nb_seg=2
- m1: next=NULL, nb_seg=2
- second packet
- m2: next=NULL, nb_seg=1
Freeing the first packet will not restore nb_seg=1 in the second
segment. This is an issue because it is expected that mbufs stored
in pool have their nb_seg field set to 1.
Fixes: 8f094a9ac5d7 ("mbuf: set mbuf fields while in pool")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ali Alnubani <alialnu@nvidia.com>
This patch fixes buffer overflow reported by ASAN,
please reference https://bugs.dpdk.org/show_bug.cgi?id=818
Some tests for the rte_hash table use the rte_jhash_32b() as
the hash function. This hash function interprets the length
argument in units of 4 bytes.
This patch adds a wrapper function around rte_jhash_32b()
to reflect API differences regarding the length argument,
effectively dividing it by 4.
For some tests rte_jhash() is used with keys of length not
a multiple of 4 bytes. From the rte_jhash() documentation:
If input key is not aligned to four byte boundaries or a
multiple of four bytes in length, the memory region just
after may be read (but not used in the computation).
This patch increases the size of the proto field of the
flow_key struct up to uint32_t.
Bugzilla ID: 818
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
RTE IPv4 header definition combines the `version' and `ihl' fields
into a single structure member.
This patch introduces dedicated structure members for both `version'
and `ihl' IPv4 fields. Separated header fields definitions allow to
create simplified code to match on the IHL value in a flow rule.
The original `version_ihl' structure member is kept for backward
compatibility.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
test_shift1_check() function fails with clang build.
The reason for that is that clang uses 64-bit shift instruction for
what expected to be 32-bit operation.
To be more specific, this C code:
r2 = (uint32_t)r2 >> r4;
With clang produces:
41a4eb: 48 d3 ef shr %cl,%rdi
In that particular case it is an allowed choice, as from one side
left-operand value is known to fit into 32 bits, from other side
according to 'C' standard:
"...if the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior is
undefined."
The problem is that on x86 behavior for 64-bit and 32-bit shift
operation might differ.
The fix avoids undefined behavior by making sure
that right operand will not exceed width of the promoted left operand.
Bugzilla ID: 811
Fixes: 9f8f9d91a701 ("test/bpf: introduce functional test")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch add support for RAW API testing with ZUC
and SNOW test cases.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch add support for raw API tests for
dpaa_sec and dpaa2_sec platforms.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch renames the sgl to src_sgl in struct rte_crypto_sym_vec
to help differentiating between source and destination sgl.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As described in [1] and as announced in [2], The field ``dataunit_len``
of the ``struct rte_crypto_cipher_xform`` moved to the end of the
structure and extended to ``uint32_t``.
In this way, sizes bigger than 64K bytes can be supported for data-unit
lengths.
[1] commit d014dddb2d69 ("cryptodev: support multiple cipher
data-units")
[2] commit 9a5c09211b3a ("doc: announce extension of crypto data-unit
length")
Signed-off-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
As reported by Dmitry, RTE_MEMPOOL_F_POOL_CREATED is a flag only
manipulated internally.
This flag is not supposed to be requested from an application and would
probably result in an incorrect behavior if an application did pass it.
At least one other internal flag has been added recently and more may be
introduced later.
Rework the check and export a mask of valid user flags for use in the
unit test.
Fixes: b240af8b10f9 ("mempool: enforce valid flags at creation")
Reported-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add RTE_ prefix to helper macro to calculate mempool header size and
make it internal. Old macro is still available, but deprecated.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix the mempool flags namespace by adding an RTE_ prefix to the name.
The old flags remain usable, to be deprecated in the future.
Flag MEMPOOL_F_NON_IO added in the release is just renamed to have RTE_
prefix.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Convert rte_atomic usages to compiler atomic built-ins
for stats sync.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
