Store function control window offset to correctly set the offset
of prime EvQ in EF100.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Flow rules may be used mark packets. Support delivery of mark/flag
values to user in mbuf fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead allows to choose Rx prefix (which contains RSS hash value
and valid flag) per queue.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead FW supports Rx prefix choice based on required fields in Rx
prefix. The feature is generalized in libefx to provide Rx prefixes
layout for other NICs and firmware variants. Now driver can get
the prefix layout after Rx queue start and use the layout details to
check its expectations or simply in run-time.
Rx prefix choice and query interface is defined in SF-119689-TC
EF100 host interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
If RSS hash offload is requested, Rx queue should be configured
to request RSS hash information delivery.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
A new function allows to check if used Rx prefix layout matches
available Rx prefix layout. Length check is out-of-scope of the
function and caller should ensure length is either checked or
different length with everything required in place is handled
properly.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When Rx queue is created, allow to specify if the driver would like
to get RSS hash value calculated by the hardware.
Use the flag to choose Rx prefix on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce an extra variable with required Rx prefix fields mask
to make it easier to request more fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Also support Rx packet type offload.
Checksumming is actually always enabled. Report it per-queue offload
to give applications maximum flexibility.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Handle VXLAN and Geneve TSO on EF100 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead boards support TSO version 3.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add support for outer IPv4/UDP and inner IPv4/UDP/TCP checksum offloads.
Use partial checksum offload for inner TCP/UDP offload.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100 native Tx datapath demands that packet header be contiguous
when partial checksum offloads are used since helper function is
used to calculate pseudo-header checksum (and the function requires
contiguous header).
Add an explicit check for this assumption and restructure the code
to avoid TSO header linearisation check since TSO header
linearisation is not done on EF100 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add datapath log level which limits logs included in build since
on datapath it is too expensive to dive into rte_log() function
even if it does nothing.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These callbacks are used when event queue is polled via libefx.
The libefx polling is used for management event queue, but we do not
expect any Tx complete events on it, and for datapath event queue at
flushing.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These callbacks are used when event queue is polled via libefx.
The libefx polling is used for management event queue, but we do not
expect any Rx events on it, and for datapath event queue at flushing
(when these events are typically ignored, since queue is being stopped).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Control window is required to talk to NIC.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx usage may be limited to control path only and its
implementation of datapath may not support NIC family or
PMD efx Rx/Tx datapaths implementation may be not yet ported
to updated libefx.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Update generic code to check that MTU and Rx buffer sizes
do not result in more Rx scatter segments than NIC can make.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead QDMA has limitation on maximum number of Rx scatter
buffers to be used by a packet. If the limitation is violated,
the datapath is dead. FW should ensure that it is OK, but
drivers need to know the limitation anyway to check parameters
when Rx queues are configured and MTU is set.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead does not support LED control yet. It is perfectly
fine to ignore LED set failure because of no support if
configured LED mode is the default.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
For consistency it is better to have separate MCDI wrappers.
Make efx_phy_led_mode_t visible even if EFSYS_OPT_PHY_LED_CONTROL
is disabled to be able to use it in the added wrapper arguments.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Make ef10_phy_reconfigure() simpler to read and less error-prone.
Avoid confusing case when two MCDI's are called from one function.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a check for the return value of the sscanf call in
parse_internal_args(), returning an error if we don't get the expected
result.
Coverity issue: 362049
Fixes: 96cb19521147 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
AF_XDP PMDs who wish to share a UMEM must have a unique context
(ctx) ie. netdev,qid tuple. For instance, the following will not
work since both PMDs' contexts are identical.
--vdev net_af_xdp0,iface=ens786f1,start_queue=0,shared_umem=1
--vdev net_af_xdp1,iface=ens786f1,start_queue=0,shared_umem=1
Supporting this scenario would require locks, which would impact
the performance of the more typical cases - xsks with different
netdev,qid tuples.
Fixes: 74b46340e2d4 ("net/af_xdp: support shared UMEM")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
During a hotplug attempt, failsafe will try to bring a subdevice that
just appeared to its internal state. On error, the subdevice is marked
for removal and will be cleaned up.
However failsafe_dev_remove() only remove active devices. Devices that
failed during probe will be stuck in DEV_PARSED state repeatedly.
Consider all devices when doing a removal round, but limit burst control
and stats saving to active devices.
Fixes: 598fb8aec6f6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
Current implementation for PF RSS config wrap function has some
potential bugs about GTPU, e.g., same input set for GTPU inner and
non-TUN have different hash values, which should be same. Thus, we
use extra pre and post processing to re-config GTPU rules.
Fixes: 185fe122f489 ("net/ice: fix GTPU down/uplink and extension conflict")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If the infinite Rx argument ('infinite_rx') is provided a ring is
allocated and filled in the '.rx_queue_setup' dev_ops.
Later this ring freed in the '.dev_close' dev_ops.
If the 'infinite_rx' provided and '.dev_close' called before
'.rx_queue_setup', the ring will be NULL and trying to empty/free it
will cause a crash.
This is fixed by adding ring NULL check before trying to empty/free it.
Bugzilla ID: 548
Fixes: a3f5252e5cbd ("net/pcap: enable infinitely Rx a pcap file")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Abstract socket address has no connection with
filesystem pathnames and the socket disappears
once all open references are closed.
Memif pmd will use abstract socket address by default.
For backwards compatibility use new argument
'socket-abstract=no'
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
The glibc free allows free(NULL) as null operation,
so remove this useless null checks.
Coverity issue: 357719
Fixes: da138cd47e06 ("net/octeontx2: handle port reconfigure")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added support in the ULP mapper to enable parent child flow
creation and destroy. This feature enables support for the vxlan
decap functionality.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FDB type is now driven by the caller, not the template.
So remove it.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Name changes due to consolidating the template table processing
and hence are not necessary.
- chip before type in name
- removal of class in key field info
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Added support for parent child flow database apis. This
feature adds support to enable vxlan decap support where
flows needs to maintain parent-child flow relationship.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to select internal Exact Match vs
External Exact Match support while loading the PMD.
- Added new mem type conditional opcode for internal/external
- Adapted the flowdb resource counts based on selected mode
- Template changes to use the new opcode
- The decision for internal/external EM support is based on the
devargs parameter max_num_kflows. If this is set, external EM
is used.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, we are only registering to this event if the function
is a trusted VF. This patch extends it for PFs as well.
Fixes: 322bd6e70272 ("net/bnxt: add port representor infrastructure")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The default and regular flows are stored in the same flow table
instead of different flow tables. This should help code reuse
and reducing the number of allocations.
So combine default and regular flows in flow database.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The table processing has been consolidated to be able to reuse the same
code for action and classification template processing.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Implement HWRM_FUNC_VF_RESOURCE_CFG command and use it to
reserve resources for VFs when NEW RM is enabled.
2. Invoke PF’s FUNC_CFG before configuring VFs resources.
3. Don’t consider max_rx_em_flows in max_l2_ctx calculation
when VFs are configured.
4. Issue HWRM_FUNC_QCFG instead of HWRM_FUNC_QCAPS to find
out the actual allocated resources for VF.
5. Don’t add random mac to the VF.
6. Handle completion type CMPL_BASE_TYPE_HWRM_FWD_REQ instead
of CMPL_BASE_TYPE_HWRM_FWD_RESP.
7. Don't enable HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE
when the list of HWRM commands that needs to be forwarded
to the PF is specified in HWRM_FUNC_DRV_RGTR.
8. Update the HWRM commands list that can be forwarded to the
PF.
Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
