PMD uses only power of two number of Completion Queue Elements (aka CQE),
storing the number of elements in log2 helps to reduce the size of the
container to store it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
PMD uses only power of two number of descriptors, storing the number of
elements in log2 helps to reduce the size of the container to store it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Rework Work Queue Element (aka WQE) structures to fit PMD needs.
A WQE is an aggregation of 16 bytes elements known as "data segments"
(aka dseg).
The only common part is the first two elements i.e. the control one to
define the job type, and the Ethernet segment which embed offload requests
with other information, after that, it can have:
- a raw data packet,
- a data pointer to the packet itself,
- both.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
With an app using hotplug feature, when a device is unplugged without
unregistering makes the interrupt handling unstable.
Fixes: 6c53f87b34 ("nfp: add link status interrupt")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
81xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_CQE_RX2 capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Certain thunderx SoC pass has additional optional word
in Rx descriptor to hold tunneling extension info.
Based on this capability, the location where packet pointer
address stored in Rx descriptor will vary.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
thunderx pmd driver needs to support multiple SoC
variants in ThunderX family.
Remove generic pass references from driver as each SoC
can have same pass number.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
With recent gcc versions, e.g. gcc 6.1, compilation of mlx drivers with
debug enabled produces lots of errors complaining that "pedantic" is
not a warning level that can be ignored.
error: ‘-pedantic’ is not an option that controls warnings [-Werror=pragmas]
#pragma GCC diagnostic ignored "-pedantic"
^~~~~~~~~~~
These errors can be removed by changing the "-pedantic" to "-Wpedantic".
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Fixes: 771fa900b7 ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Missing pcap assignment may cause pcap file/interface to be opened
again, and previous one not closed.
Fixes: 1e38a7c669 ("pcap: fix storage of name and type in queues")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
simplify function rte_eth_from_pcaps_common by using interim variables.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Both fields are fields of same type of struct, one's size can't be bigger
than others.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Remove hardcoded single interface values, make it more obvious.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reorder functions to be able to remove function declarations in .c file.
Function definitions not modified.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Remove duplicated check by reorganizing the code, no functional change.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Don't carry kvlist argument into sub function and used it, use kvlist
argument in upper level of call stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Instead of defining numa_node variable upper level of call stack and
carry into sub function, set it where needs to be used.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eth_from_pcaps and rte_eth_from_pcaps_n_dumpers functions are very
close, updated rte_eth_from_pcaps function and reused.
No functional update.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Number of queues is defined by devargs, a check added to be sure this
number is not bigger than configured max number of queue.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
struct rx_pcaps and tx_pcaps used to point parsed devargs, but it is not
clear with current names.
Merged both into single struct and modified struct name and field names.
Functionality not changed, only struct names.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
pcap PMD is using ring PMD configuration parameters to set max number of
queues. This creates an unnecessary dependency and confusion.
Stop using configuration parameter to set max number of queues and
convert this variable into a macro within source code, to simplify
configuration file.
Default value of macro is same as ring parameter's default.
pcap pmd doesn't need to be configured in a detail to set rx and tx max
queue numbers separately, so using same macro for both queues.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Fixes: 0f6b7c7f7a ("igb: use DD bit to count RX available descriptors")
Signed-off-by: Ali Volkan Atli <volkan.atli@argela.com.tr>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
To improve performance the NIC expects for large packets to have a pointer
to a cache aligned address, old inline code could break this assumption
which hurts performance.
Fixes: 2a66cf3789 ("net/mlx5: support inline send")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Rework logic of wqe_write() and wqe_write_vlan() which are pretty similar
to keep a single one.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This function was supposed to be inlined, but was not because several
functions calls it. This function should always be inline avoid
external function calls and to optimize code in data-path.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Packet rejection was routed to a polled queue. This patch route them to a
dummy queue which is not polled.
Fixes: 76f5c99e68 ("mlx5: support flow director")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This is done to prepare support for drop queues, which are not related to
existing Rx queues and need to be managed separately.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
memmove was moving bytes as the number of elements next to i, while it
should move the number of elements multiplied by the size of each element.
Fixes: e9086978 ("mlx5: support VLAN filtering")
Signed-off-by: Raslan Darawsheh <rdarawsheh@asaltech.com>
This capability is implemented but not reported.
Fixes: f3db948918 ("mlx5: support Rx VLAN stripping")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The return value in DPDK is negative errno on failure.
Since internal functions in mlx driver return positive
values need to negate this value when it returned to
dpdk layer.
Fixes: 76f5c99 ("mlx5: support flow director")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
The user is allowed to call ->rx_pkt_burst() even without free
mbufs in the pool. In this scenario we'll fail allocating a rep mbuf
on the first iteration (where pkt is still NULL). This would cause us
to deref a NULL pkt (reset refcount and free).
Fix this by checking the pkt before freeing it.
Fixes: a1bdb71a32 ("net/mlx5: fix crash in Rx")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
To make the PCTYPE in x722 compatible with original PCTYPE in
flow director (FD) filters, the PCTYPE in the FD programming
descriptor needs to be translated into a different PCTYPE using
GLQF_FD_PCTYPE table.
Translation needs to be done before the FD filter is programmed.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This change enables device LRO if requested.
The current implementation of jumbo frame Rx can be used for LRO
directly without changes.
Note that since jumbo frame uses both ring0 and ring1, it cannot
be enabled in UPT (VMDirectPath) mode.
Signed-off-by: Yong Wang <yongwang@vmware.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When adding a DPDK port to ovs-vswitchd with DPDK, the vmxnet3 device
fails to activate due to mismatched magic number. This failure causes
following operations to run: start the port, stop the port,
reconfigure and re-start the port.
During reconfigure, if there is an existing memzone, driver will reuse
it. But reconfigure may request different number of Tx/Rx queues.
This results in a memzone with wrong size and potential invalid memory
access.
To fix this, free the memzone if found and reserve a new one.
Signed-off-by: Yong Wang <yongwang@vmware.com>
Reviewed-by: Guolin Yang <gyang@vmware.com>
Reviewed-by: Daniele Di Proietto <ddiproietto@vmware.com>
Tested-by: Daniele Di Proietto <ddiproietto@vmware.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
For the vector PMD, release all mbufs from the Rx queue if no packets
are received after device start.
Fixes: 9ed94e5bb0 ("i40e: add vector Rx")
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
For the vector PMD, release all mbufs from the Rx queue if no packets
are received after device start.
Fixes: 11b220c649 ("ixgbe: fix release queue mbufs")
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
