The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch docs the issue on EAL argument that the last EAL
argument is replaced by program name in argv[].
Reported-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch is used to add the class_id (class_code,
subclass_code, programming_interface) support for
pci_device probe. With this patch, it will be
flexible for users to probe a class of devices
by class_id.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The commit 66819e6 has introduced a dependency on libarchive to be able
to use some tar resources in the unit tests.
It is now an optional dependency because some systems do not have it
installed.
If CONFIG_RTE_APP_TEST_RESOURCE_TAR is disabled, the PCI test will not
be run. When a "configure" script will be integrated, the libarchive
availability could be checked to automatically enable the option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
The log history uses rte_mempool. In order to remove the mempool
dependency in EAL (and improve the build), this feature is deprecated.
The ABI is kept but the behaviour is now voided because it seems this
function was not used. The history can be read from syslog.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Fix broken console directive in the ABI validator section of the
ABI versioning docs.
Fixes: f1ef9794f9bd ("doc: add ABI guidelines")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
A previous patch modified the CLIs witout updating the examples.
Fixes: 53b2bb9b7ea7 ("app/testpmd: new flow director commands")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Port needs to be stopped and then closed before it can be detached,
but the documentation was only saying to close the port.
Also, both sections for port detaching and attaching has been reformatted
slightly, to show clearly how to use the commands.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
"port config all txqflags <value>" allows for
specifying txq_flags value in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
"port config all scatter on|off" allows for
controlling rxmode.enable_scatter in command line.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter allows for controlling rxmode.enable_scatter
which in turn allow for multi-segment packet receive tests.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The routing pipeline registers a callback function with the nic ports and
this function is invoked for updating the routing entries (corresponding to
local host and directly attached network) tables whenever the nic ports
change their states (up/down).
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
As a result of tracking, output ports of routing pipelines are linked with
physical nic ports (potentially through other pipeline instances).
Thus, the mac addresses of the NIC ports are assigned to routing pipeline
out ports which are connected to them and are further used in routing table
entries instead of hardcoded default values.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch enables rss (receive side scaling) per network interface
through the configuration file. The user can specify following
parameters in LINK section for enabling the rss feature - rss_qs,
rss_proto_ipv4, rss_proto_ipv6 and ip_proto_l2.
The "rss_qs" is mandatory parameter which indicates the queues to be
used for rss, while rest of the parameters are optional. When optional
parameters are not provided in the configuration file, default setting
(ETH_RSS_IPV4 | ETH_RSS_IPV6) is assumed for "rss_hf" field of the
rss_conf structure.
For example, following configuration can be applied for using the rss
on port 0 of the network interface;
[PIPELINE0]
type = MASTER
core = 0
[LINK0]
rss_qs = 0 1
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ0.1 RXQ1.0
pktq_out = TXQ0.0 TXQ1.0 TXQ0.1
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Corrected a typo in application name.
Corrected authentication algorithm to fit the sample 16-byte
authentication key.
Fixes: ba7b86b1 ("doc: add l2fwd-crypto sample app guide")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch provides counter mode support to AES-NI multi-buffer library.
The following cipher algorithm is enabled:
- RTE_CRYPTO_CIPHER_AES_CTR
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added possibility for AES to work in counter mode
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
AES-NI MB PMD supports 128, 192 and 256-bit keys,
not 128, 256 and 512-bit keys.
Fixes: 924e84f87306 ("aesni_mb: add driver for multi buffer based crypto")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Commit 4768c475 added a pointer to the memzone in rte_ring. However,
all memzones are residing in local mem_config, therefore accessing
the memzone pointer inside the guest in an IVSHMEM-shared rte_ring
will cause segmentation fault. This issue is unlikely to ever get
fixed, as this would require lots of changes for very little benefit,
therefore we're documenting this limitation instead.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Added PEP8 to the DPDK Coding Style guidelines to cover Python
contributions to DPDK.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove the deprecation notice and add an entry in the release note
for the changes in mempool allocation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_pktmbuf_detach() function should decrease refcnt on a direct
buffer as stated in doc/guides/prog_guide/mbuf_lib.rst:
"whenever the indirect buffer is detached, the reference counter on the
direct buffer is decremented."
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The rte_mempool structure is changed, which will cause an ABI change
for this structure. Providing backward compat is not reasonable
here as this structure is used in multiple defines/inlines.
Allow mempool cache support to be dynamic depending on if the
mempool being created needs cache support. Saves about 1.5M of
memory used by the rte_mempool structure.
Allocating small mempools which do not require cache can consume
larges amounts of memory if you have a number of these mempools.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
We don't want to have this instructions in the generated docs, so use
comments. It's also less confusing for people adding entries in the
documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
It's reported that it's has not been working for a long while. And due
to it's complex, it's better to redesign it than to fix it to make it
work again.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Previously, for tunnel packets, such as VXLAN/NVGRE, the vlan
tags of the inner header will be stripped without putting vlan
info to descriptor, what is not expected behaviour.
This patch fixes it by changing hardware configuration to leave
the inner packet alone.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Fixes: a778a1fa2e4e ("i40e: set up and initialize flow director")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
The Qlogic Everest Driver for Ethernet(QEDE) Poll Mode Driver(PMD) is
the DPDK specific module for QLogic FastLinQ QL4xxxx 25G/40G CNA family
of adapters as well as their virtual functions (VF) in SR-IOV context.
This patch adds QEDE PMD, which interacts with base driver and
initialises the HW.
This patch content also includes:
- eth_dev_ops callbacks
- Rx/Tx support for the driver
- link default configuration
- change link property
- link up/down/update notifications
- vlan offload and filtering capability
- device/function/port statistics
- qede nic guide and updated overview.rst
Note that the follow on commits contain the code for the features mentioned
in documents but not implemented in this patch.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The default was to compile every logs (including debug) and set
the default level to debug.
As some debug logs may hurt performance, a notice is added and the
default level is now info.
In order to enable debug logs, they must be compiled with
RTE_LOG_LEVEL=RTE_LOG_DEBUG and enabled at runtime with --log-level=8.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Changed symbol on NIC overview table from X to Y to help
clarify the indicated features are supported. The X caused
confusion for some readers.
Also, added * character to indicate partially supported
features. This can be used in the future to direct the reader
to more specific details in the individual NIC guides.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542af4).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The driver i40e was using a specific PCI config before the release 16.04.
Since 16.04, it is always enabled in i40e (commit 56465cfaf).
The API has been deprecated in the commit 68f77593823cab.
The igb_uio implementation has been deprecated in commit b7cf8e155.
The config helper - through igb_uio sysfs entries - is now removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The git messages have three parts:
1/ the headline
2/ the explanations
3/ the footer tags
The headline helps to quickly browse an history or catch instantly the
purpose of a commit. Making it short with some consistent wording
allows to easily parse it or match some patterns.
The explanations must give some keys like the reason of the change.
Nothing can be automatically checked for this part, except line length.
The footer contains some tags to find the origin of a bug or who
was working on it.
This script is doing some basic checks mostly on parts 1 and 3.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a new section on tested platforms and nics to the release notes.
Signed-off-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Following discussions with Jan, here is a deprecation notice to prepare for
hotplug and rte_device changes to come in 16.07.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
We currently exposed way too many fields (or even structures) than
necessary. For example, vhost_virtqueue struct should NOT be exposed
to user at all: application just need to tell the right queue id to
locate a specific queue, and that's all. Instead, the structure should
be defined in an internal header file. With that, we could do any changes
to it we want, without worrying about that we may offense the painful
ABI rules.
Similar changes could be done to virtio_net struct as well, just exposing
very few fields that are necessary and moving all others to an internal
structure.
Huawei then suggested a more radical yet much cleaner one: just exposing
a virtio_net handle to application, just like the way kernel exposes an
fd to user for locating a specific file, and exposing some new functions
to access those old fields, such as flags, virt_qp_nb.
With this change, we're likely to be free from ABI violations forever
(well, except when we have to extend the virtio_net_device_ops struct).
For example, following nice cleanup would not be a blocking one then:
http://dpdk.org/ml/archives/dev/2016-February/033528.html
Suggested-by: Huawei Xie <huawei.xie@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a programmer's guide section for cryptodev library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Details supported device features and algorithms for each crypto PMD.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds a notice that the API for the xstats
functionality will be modified in the 16.07 release, with
no backwards compatibility planned as it would require
code duplication in each PMD that supports xstats.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Several new fields will be added to structure rte_port_source_params for
source port enhancement with pcap file reading support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
