PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The variable "port" should be defined as uint16_t, fix it here.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add CKSUM_GOOD flag to distinguish a good checksum from an unknown one.
Since vector Rx supports checksum offload, this patch removes the
hw_ip_checksum check in fm10k_rx_vec_condition_check().
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
A previous patch removed some necessary lines about Rx checksum offload
by mistake, this patch adds them back.
Fixes: 6046898f50 ("net/mbuf: remove unused Rx error flags")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
We find that when traffic is light, a small number of packets will have
wrong metadata (e.g. packet type), however this issue will not happen
when traffic is heavy.
The root cause is some fields in fm10k_rx_desc are read at the wrong time,
since the descriptor (being 16-bytes big) is not read as a single atomic
operation. When the input speed is slower than software's capability,
fm10k scalar Rx function accesses descriptors at about the same time
as HW writes them, so the scenario can occur: some fields like pkt_info
in fm10k_rx_desc are read before HW writeback but some fields like DD bit
are read after HW writeback, this will lead to the later packet parsing
function using incorrect value.
This patch fixes this issue by reading and parsing Rx descriptor only after
first checking that the DD bit is set.
Fixes: 4b61d3bfa9 ("fm10k: add receive and tranmit")
Fixes: c82dd0a7bf ("fm10k: add scatter receive")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Following the discussions from:
http://dpdk.org/ml/archives/dev/2015-July/021721.htmlhttp://dpdk.org/ml/archives/dev/2016-April/038143.html
The value of these flags is 0, making them useless. Today, no example
application checks them on Rx, and only few drivers sets them and
silently give wrong packets to the application, which should not happen.
This patch removes the unused flags from rte_mbuf and their use in the
drivers. The i40e and fm10k are kept as they are today and should be
fixed to drop bad packets. The enic driver is managed by its maintainer
in another patch.
Fixes: c22265f6 ("mbuf: add new packet flags for i40e")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch enables reading sglort (global resource tag) info into the
mbuf for RX and inserting an FTAG (Fabric Tag) at the beginning of the
packet for TX. The vlan_tci_outer field selected from rte_mbuf structure
for sglort is not used in fm10k now.
In FTAG based forwarding mode, the switch will forward packets according
to glort info in FTAG rather than mac and vlan table.
To activate this feature, user needs to pass a devargs parameter to eal
for fm10k device like "-w 0000:84:00.0,enable_ftag=1". Currently this
feature is supported only on PF, because FM10K_PFVTCTL register is
read-only for VF.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When the TX function tries to free a bunch of mbufs, it will free
them one by one. This change will scan the free list and merge the
requests in case they belongs to same pool, then free once, which
will reduce cycles on freeing mbufs.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
rx_descriptor_done is used by interrupt mode example application
(l3fwd-power) to check rxd DD bit to decide the RX trend,
then l3fwd-power will adjust the cpu frequency according to
the result.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
In fm10k_recv_scattered_pkts function, a packet is stored in a linked list,
offload flags such as PKT_RX_VLAN_PKT should be set in the first segment.
Fixes: 6b59a3bc82 ("fm10k: fix VLAN in Rx mbuf")
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
vlan_tci should be copied from RX descriptor to mbuf,
and flag PKT_RX_VLAN_PKT should be set for every RX packet,
this patch fixes this issue.
Packets in fm10k device always carry at least one VLAN tag.
For those packets coming in without VLAN tag,
the port default VLAN tag will be used.
So in fm10k, always PKT_RX_VLAN_PKT flag is set and vlan_tci
is valid for each RX packet's mbuf.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch enables fm10k TSO feature for both non-tunneling packet
and tunneling packet.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The parameter tx_free_thresh is not consistent between the drivers:
some use it as rte_eth_tx_burst() requires, some release buffers when
the number of free descriptors drop below this value.
Let's use it as most fast-path code does, which is the latter, and update
comments throughout the code to reflect that.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In TX side, bit FM10K_TXD_FLAG_LAST in TX descriptor only is set
in the last descriptor for multi-segment packets. But current
implementation didn't set all the fields of TX descriptor, which
will cause descriptors processed now to re-use fields set in last
scroll. If FM10K_TXD_FLAG_LAST bit was set in the last round and
it happened this is not the last descriptor of a multi-segnment
packet, HW will send out the incomplete packet out and leads to
data intergrity issue.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Tested-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
move fm10k PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
