rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across app/testpmd
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across app/flow-perf
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Rx queue is configured with split feature the extended
setup with specified segment sizes and pool will be performed.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add command line parameter:
--rxoffs=X[,Y]
Sets the offsets of packet segments from the beginning of the
receiving buffer if split feature is engaged. Affects only the
queues configured with split offloads (currently BUFFER_SPLIT
is supported only).
Add interactive mode command, providing the same:
testpmd> set rxoffs (x[,y]*)
Where x[,y]* represents a CSV list of values, without white space.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add command line parameter:
--rxpkts=X[,Y]
Sets the length of segments to scatter packets on receiving if split
feature is engaged. Affects only the queues configured with split
offloads (currently BUFFER_SPLIT is supported only).
Add interactive mode command:
testpmd> set rxpkts (x[,y]*)
Where x[,y]* represents a CSV list of values, without white space.
Sets the length of segments to scatter packets on receiving if split
feature is engaged. Affects only the queues configured with split
offloads (currently BUFFER_SPLIT is supported only). Optionally the
multiple memory pools can be specified with --mbuf-size command line
parameter and the mbufs to receive will be allocated sequentially
from these extra memory pools.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch add support for RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT
providing per queue configuration for this offload.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The command line parameter --mbuf-size is updated, it can handle
the multiple values like the following:
--mbuf-size=2176,512,768,4096
specifying the creation the extra memory pools with the requested
mbuf data buffer sizes. If some buffer split feature is engaged
the extra memory pools can be used to configure the Rx queues
with rte_the_dev_rx_queue_setup_ex().
The extra pools are created with requested sizes, and pool names
are assigned with appended index: mbuf_pool_socket_%socket_%index.
Index zero is used to specify the first mandatory pool to maintain
compatibility with existing code.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
There is no error info displayed when running flow flush
command with invalid port. This patch fixed the issue.
Fixes: 2a449871a12d ("app/testpmd: align behaviour of multi-port detach")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
rte_flow update introduced has_vlan field for ETH header item,
and field has_more_vlan for VLAN header item.
The new fields are used to clearly indicate packet tagging chrasteristics.
This patch updates testpmd CLI to support the new fields.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
A new parameter `hairpin-mode` is introduced to the testpmd command
line. Bitmask value is used to provide a more flexible configuration.
This parameter should be used when `hairpinq` is specified in the
command line.
Bit 0 in the LSB indicates the hairpin will use the loop mode. The
previous port Rx queue will be connected to the current port Tx
queue.
Bit 1 in the LSB indicates the hairpin will use pair port mode. The
even index port will be paired with the next odd index port. If the
total number of the probed ports is odd, then the last one will be
paired to itself.
If this byte is zero, then each port will be paired to itself.
Bit 0 takes a higher priority in the checking.
Bit 4 in the second bytes indicate if the hairpin will use explicit
Tx flow mode.
e.g. in the command line, "--hairpinq=2 --hairpin-mode=0x11"
If not set, default value zero will be used and the behavior will
try to get aligned with the previous single port mode. If the ports
belong to different vendors' NICs, it is suggested to use the `self`
hairpin mode only.
Since hairpin configures the hardware resources, the port mask of
packets forwarding engine will not be used here.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
rte_flow update, following RFC [1], added to ethdev the rte_flow item
ipv6_frag_ext.
This patch updates testpmd CLI to support the new item and its fields.
To match on fragmented IPv6 packets, this item is added to pattern:
... ipv6 / ipv6_frag_ext ...
[1] http://mails.dpdk.org/archives/dev/2020-March/160255.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
rte_flow update, following RFC [1], introduced has_frag_ext field for
IPv6 header item, used to indicate match on fragmented/non-fragmented
packets.
This patch updates testpmd CLI to support the new field.
To match on non-fragmented IPv6 packets, need to use pattern:
... ipv6 has_frag_ext spec 0 has_frag_ext mask 1 ...
To match on fragmented IPv6 packets, need to use pattern:
... ipv6 has_frag_ext spec 1 has_frag_ext mask 1 ...
To match on any IPv6 packets, the has_frag_ext field should
not be specified for match.
[1] https://mails.dpdk.org/archives/dev/2020-August/177257.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch updates testpmd CLI to support fragment_offset field of
IPv4 header item.
To match on non-fragmented IPv4 packets, need to use pattern:
... ipv4 fragment_offset spec 0 fragment_offset mask 0x3fff ...
To match on fragmented IPv4 packets, need to use pattern:
... ipv4 fragment_offset spec 1 fragment_offset last 0x3fff
fragment_offset mask 0x3fff ...
(Use the full available range 1 to 0x3fff to include all possible
values.)
To match on any IPv4 packets, fragmented and non-fragmented,
the fragment_offset field should not be specified for match.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds shared action support to testpmd CLI.
All shared actions created via testpmd CLI assigned ID for further
reference in other CLI commands. Shared action ID supplied as CLI
argument or assigned by testpmd is similar to flow ID & limited to
scope of testpdm CLI.
Create shared action syntax:
flow shared_action {port_id} create [action_id {shared_action_id}]
[ingress] [egress] action {action} / end
Create shared action examples:
flow shared_action 0 create action_id 100 \
ingress action rss queues 1 2 end / end
This creates shared rss action with id 100 on port 0.
flow shared_action 0 create action_id \
ingress action rss queues 0 1 end / end
This creates shared rss action with id assigned by testpmd
on port 0.
Update shared action syntax:
flow shared_action {port_id} update {shared_action_id}
action {action} / end
Update shared action example:
flow shared_action 0 update 100 \
action rss queues 0 3 end / end
This updates shared rss action having id 100 on port 0
with rss to queues 0 3 (in create example rss queues were
1 & 2).
Destroy shared action syntax:
flow shared_action {port_id} destroy action_id {shared_action_id} [...]
Destroy shared action example:
flow shared_action 0 destroy action_id 100 action_id 101
This destroys shared actions having id 100 & 101
Query shared action syntax:
flow shared_action {port} query {shared_action_id}
Query shared action example:
flow shared_action 0 query 100
This queries shared actions having id 100
Use shared action as flow action syntax:
flow create {port_id} ... / end actions [action / [...]]
shared {action_id} / [action / [...]] end
Use shared action as flow action example:
flow create 0 ingress pattern ... / end \
actions shared 100 / end
This creates flow rule where rss action is shared rss action
having id 100.
All shared action CLIs report status of the command.
Shared action query CLI output depends on action type.
Signed-off-by: Andrey Vesnovaty <andreyv@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following ethdev update in the previous patch of this series, this
patch adds CLI support to query information related to AGE action.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Use sample action with ratio is 1 for mirroring flow, add
supports to set the different port or encap action for mirrored
packets.
The example of test-pmd command:
1. set sample_actions 1 port_id id 1 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 1 / port_id id 2...
The flow will result in all the matched ingress packets will be sent to
port 2, and also mirrored the packets and sent to port 1.
2. set raw_encap 0 eth src.../ ipv4.../...
set raw_encap 1 eth src.../ ipv4.../...
set sample_actions 2 raw_encap index 0 / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets and with
the different encapsulated data and sent to wire.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add a new testpmd command 'set sample_actions' that supports the
multiple sample actions list configuration by using the index:
set sample_actions <index> <actions list>
The examples for the sample flow use case and result as below:
1. set sample_actions 0 mark id 0x8 / queue index 2 / end
.. pattern eth / end actions sample ratio 2 index 0 / jump group 2 ...
This flow will result in all the matched ingress packets will be
jumped to next flow table, and the each second packet will be
marked and sent to queue 2 of the control application.
2. ...pattern eth / end actions sample ratio 2 / port_id id 2 ...
The flow will result in all the matched ingress packets will be
duplicated and sent to the representor peer (VF or wire) on DPDK port 2,
and the each second packet will also be sent to E-Switch manager vport.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This is a cleanup commit.
It assembles all tunnel outer updates into one function call to avoid
code duplications.
It defines RTE_VXLAN_GPE_DEFAULT_PORT (4790) in accordance with all
other tunnel protocol definitions.
It replaces all numeric values 4789 in their corresponding definition
RTE_VXLAN_GPE_DEFAULT_PORT.
It updates the 'csum parse-tunnel' documentation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
IANA has assigned port 6081 as the fixed well-known destination port for
GENEVE. Nevertheless draft-ietf-nvo3-geneve-09 recommends that
implementations make this configurable. This commit enables specifying
any positive UDP destination port number for GENEVE protocol parsing.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols. In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Called rte_eth_dev_info_get() in testpmd, to get device info
so that speed capabilities can be printed under "show device info"
Bugzilla ID: 496
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_cldemote is similar to a prefetch hint - in reverse.
On x86, cldemote(addr) enables software to hint to hardware that line is
likely to be shared. This is quite useful in core-to-core communications
where cache-line is likely to be shared.
ARM and PPC implementation is provided with NOP and can be added if any
equivalent instructions could be used for implementation on those
architectures.
Signed-off-by: Omkar Maslekar <omkar.maslekar@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
There is a potential race condition in 'service_attr_get' which will cause
test failures since the service core thread is still running while the
values are being retrieved/reset.
This patch fixes the race condition by waiting for the service core thread
to stop before continuing with the unit test checks.
Fixes: 4d55194d76a4 ("service: add attribute get function")
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.
The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.
Following is a detailed description of the changes that have been made.
1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.
struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/
uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}
2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.
/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}
3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.
* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)
/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/
#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/
struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}
This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Since we are not holding the mbufs or creating any references
in the app, hence mbuf fast free offload can be enabled.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The resources held by crypto adapter should be freed when the
test suite exits.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
The arguments passed to rte_event_crypto_adapter_caps_get() and
rte_event_crypto_adapter_create() are incorrect.
In the rte_event_crypto_adapter_caps_get(), event device id should
be the first argument and cryptodev id should be the second argument.
In the rte_event_crypto_adapter_create(), the event device id should
be the second argument.
Fixes: 3c2c535ecfc0 ("test: add event crypto adapter auto-test")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
The capability of a hardware event device should be checked before
creating a event crypto adapter in a particular mode. The test case
returns error if the mode is not supported.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Allows creation of net_null if vdev EAL option is not specified and
uninit vdev created in the test. The change also adds error checks
for vdev init and uninit.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
adapter_multi_eth_add_del() does vdev init but doesn't uninit them.
This causes issues when running event_eth_rx_adapter_autotest multiple
times.
The fix does vdev uninit before exiting the test.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
A new functions which uses the structure of the test vectors for SDAP
is added and call a functions responsible to call the test_pdcp_proto
with the test vector both for encapsulation and decapsulation.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
The function test_pdcp_proto was relying to heavily on the structure
of test vectors for PDCP making it difficult to be reusable.
The function is changed to take all the test parameters as input and
does not need access to the tests vectors anymore.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
The test vectors are structured in a more readable way compared
to test vector for PDCP. This structure allows to have all the
information about a test vector at the same place.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the xform with right configuration.
For session based ops, sym session pool is created with
valid userdata size.
Fixes: 24054e3640a2 ("test/crypto: use separate session mempools")
Cc: stable@dpdk.org
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the cryptodev raw API test support to unit test.
In addition a new test-case for QAT PMD for the test type is
enabled.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates ``rte_crypto_sym_vec`` structure to add
support for both cpu_crypto synchronous operation and
asynchronous raw data-path APIs. The patch also includes
AESNI-MB and AESNI-GCM PMD changes, unit test changes and
documentation updates.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Switched from device specific test suite to unified
cryptodev test suite. Removed the armv8 device specific test suite.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
ut_setup / ut_teardown are invoked for each test case by test framework.
The call inside test_stats is unnecessary and even incorrect.
This caused double free of objects such as crypto operation structure.
Trapped the issue when RTE_LIBRTE_MEMPOOL_DEBUG was enabled.
Fix issue by removing ut_setup / ut_teardown from test case implementation.
Fixes: 202d375c60bc ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Adam Dybkowski <adamx.dybkowski@intel.com>
This patch adds AES-ECB 128, 192 and 256 support to the aesni_mb PMD.
AES-ECB 128, 192 and 256 test vectors added to cryptodev tests.
Signed-off-by: Marcel Cornu <marcel.d.cornu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
5G DL default symlink was pointing to a 4G vector.
Fixes: d762705308c4 ("app/bbdev: add test vectors for 5GNR")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
This patch replaces the usage of the word 'slave' with more
appropriate word 'worker' in QAT PMD and Scheduler PMD
as well as in their docs. Also the test app was modified
to use the new wording.
The Scheduler PMD's public API was modified according to the
previous deprecation notice:
rte_cryptodev_scheduler_slave_attach is now called
rte_cryptodev_scheduler_worker_attach,
rte_cryptodev_scheduler_slave_detach is
rte_cryptodev_scheduler_worker_detach,
rte_cryptodev_scheduler_slaves_get is
rte_cryptodev_scheduler_workers_get.
Also, the configuration value RTE_CRYPTODEV_SCHEDULER_MAX_NB_SLAVES
was renamed to RTE_CRYPTODEV_SCHEDULER_MAX_NB_WORKERS.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_lte_fec API is still experimental.
Fixes: efd453698c49 ("baseband/fpga_lte_fec: add driver for FEC on FPGA")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_5gnr_fec API is still experimental.
Fixes: 2d4306438c92 ("baseband/fpga_5gnr_fec: add configure function")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add in the "info_get" function to the driver, to allow us to query the
device.
No processing capability are available yet.
Linking bbdev-test to support the PMD with null capability.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
