This patches fixes a null pointer dereferencing that happens
when the device string passed to the iterator is NULL. This
situation can happen when iterating on a class type.
For example:
RTE_DEV_FOREACH(dev, "class=eth", &dev_iter) {
...
}
Fixes: e79df833d3 ("bus/dpaa: support hotplug ops")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
Expand vector PMD support to aarch32.
Enable i40e PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The include of 'arm_neon.h' causes issues to old gcc and aarch32.
Including 'rte_vect.h' instead fixes these issues.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expand vector PMD support to aarch32.
Enable ixgbe PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
vcopyq_laneq_u32 should be implemented for aarch32 which doesn't have
the intrinsic.
This fixes build of examples/l3fwd for armv7.
Fixes: 3c4b4024c2 ("arch/arm: add vcopyq_laneq_u32 for old gcc")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code inspection, for a non-EAL thread identified with
rte_lcore_id() == LCORE_ID_ANY, the code currently arbitrarily uses
lcore 0 while there is no guarantee this lcore is used.
Fixes: 3588aaa68e ("net/mrvl: fix HIF objects allocation")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Liron Himi <lironh@marvell.com>
After enabling promiscuous mode all packets whose destination MAC
address is a multicast address were being dropped. This fix configures
H/W to receive all traffic in promiscuous mode. Promiscuous mode also
overrides allmulticast mode on/off status.
Fixes: 40e9f6fc15 ("net/qede: enable VF-VF traffic with unmatched dest address")
Cc: stable@dpdk.org
Signed-off-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
New cn98xx SOC comes up with two NIX blocks wrt
cn96xx, cn93xx, to achieve higher performance.
Also the no of cores increased to 36 from 24.
Adding support for cn98xx where need a logic to
detect if the LF is attached to NIX0 or NIX1 and
then accordingly use the respective NIX block.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The new kernel adds the names like "pf0" for Host PCI physical
function representor on Bluefield SmartNIC hosts. This patch
provides correct HPF representor recognition over the kernel
versions 5.7 and laters.
The following port naming formats are supported:
- missing physical port name (no sysfs/netlink key) at all,
master is assumed
- decimal digits (for example "12"), representor is
assumed, the value is the index of attached VF
- "p" followed by decimal digits, for example "p2", master
is assumed
- "pf" followed by PF index, for example "pf0", Host PF
representor is assumed on SmartNIC systems.
- "pf" followed by PF index concatenated with "vf" followed by
VF index, for example "pf0vf1", representor is assumed.
If index of VF is "-1" it is a special case of Host PF
representor, this representor must be indexed in devargs
as 65535, for example representor=[0-3,65535] will
allow representors for VF0, VF1, VF2, VF3 and for host PF.
Fixes: 79aa430721 ("common/mlx5: split common file under Linux directory")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Initialize and update RSS configure based on user request
(rte_eth_rss_conf) from dev_configure and .rss_hash_update ops.
All previous default configure has been removed.
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The creation of DBR can be used by a number of different
Mellanox PMDs. for example RegEx / Net / VDPA.
This commits moves the DBR creation and release functions to common
folder.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Getter functions such as: 'mlx5_os_get_ctx_device_name',
'mlx5_os_get_ctx_device_path', 'mlx5_os_get_dev_device_name',
'mlx5_os_get_umem_id' are implemented under net directory. To enable
additional devices (e.g. regex, vdpa) to access these getter functions
they are moved under common directory.
As part of this commit string sizes DEV_SYSFS_NAME_MAX and
DEV_SYSFS_PATH_MAX are increased by 1 to make sure that the destination
string size in strncpy() function is bigger than the source string size.
This update will avoid GCC version 8 error -Werror=stringop-truncation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, when allocate a new counter, it needs loop the whole
container pool list to get a free counter.
In the case with millions of counters allocated, and all the pools
are empty, allocate the new counter will still need to loop the
whole container pool list first, then allocate a new pool to get a
free counter. It wastes the cycles during the pool list traversal.
Add a global free counter list in the container helps to get the free
counters more efficiently.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For single counter, when allocate a new counter, it needs to find the pool
it belongs in order to do the query together.
Once there are millions of counters allocated, the pool array in the
counter container will become very large. In this case, the pool search
from the pool array will become extremely slow.
Save the minimum and maximum counter ID to have a quick check of current
counter ID range. And start searching the pool from the last pool in the
container will mostly get the needed pool since counter ID increases
sequentially.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently, to check if any shared counter with same ID existing, it will
have to loop the counter pools to search for the counter. Even add the
counter to the list will also not so helpful while there are thousands
of shared counters in the list.
Change Three-Level table to look up the counter index saved in the
relevant table entry will be more efficient.
This patch introduces the Three-level table to save the ID relevant
counter index in the table. Then the next while the same ID comes, just
check the table entry of this ID will get the counter index directly.
No search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
For the case which data is linked with sequence increased index, the
array table will be more efficient than hash table once need to search
one data entry in large numbers of entries. Since the traditional hash
tables has fixed table size, when huge numbers of data saved to the hash
table, it also comes lots of hash conflict.
But simple array table also has fixed size, allocates all the needed
memory at once will waste lots of memory. For the case don't know the
exactly number of entries will be impossible to allocate the array.
Then the multiple level table helps to balance the two disadvantages.
Allocate a global high level table with sub table entries at first,
the global table contains the sub table entries, and the sub table will
be allocated only once the corresponding index entry need to be saved.
e.g. for up to 32-bits index, three level table with 10-10-12 splitting,
with sequence increased index, the memory grows with every 4K entries.
The currently implementation introduces 10-10-12 32-bits splitting
Three-Level table to help the cases which have millions of entries to
save. The index entries can be addressed directly by the index, no
search will be needed.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The guest virtio device may request MTU updating when the vhost backend
device exposes a capability to support it.
Expose the MTU feature capability.
At configuration time, check the requested MTU and update it in the HW
device.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Some configuration of the mlx5 port are done by the kernel net device
associated to the IB device represents the PCI device.
The DPDK mlx5 driver uses Linux system calls, for example ioctl, in
order to configure per port configurations requested by the DPDK user.
One of the basic knowledges required to access the correct kernel net
device is its name.
Move function to get interface name from IB device path to the common
library.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In other to fill the new requirement for virtq
configuration, set the single PD managed by the driver for
all the virtqs.
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Starting from FW version 22.27.4002, it is required to
configure protection domain (PD) for each virtq created by
DevX.
Add PD requirement in virtq DevX APIs.
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
A new vDPA driver feature was added to query the virtq
statistics from the HW.
Use this feature to show the HW queues statistics for the virtqs.
Command description: stats X Y.
X is the device ID.
Y is the queue ID, Y=0xffff to show all the virtio queues
statistics of the device X.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for statistics operations.
A DevX counter object is allocated per virtq in order to
manage the virtq statistics.
The counter object is allocated before the virtq creation
and destroyed after it, so the statistics are valid only in
the life time of the virtq.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add DevX API to create and query virtio queue statistics
from the HW. The next counters are supported by the HW per
virtio queue:
received_desc.
completed_desc.
error_cqes.
bad_desc_errors.
exceed_max_chain.
invalid_buffer.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The vDPA device offloads all the datapath of the vhost
device to the HW device.
In order to expose to the user traffic information this
patch introduces new 3 APIs to get traffic statistics, the
device statistics name and to reset the statistics per
virtio queue.
The statistics are taken directly from the vDPA driver
managing the HW device and can be different for each vendor
driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As announced during v20.05 release cycle, this
patch makes reply-ack protocol feature to be enabled
unconditionally.
This protocol feature makes the communication between the
master and the slave more robust, avoiding for example
possible undefined behaviour with VHOST_USER_SET_MEM_TABLE.
Also, reply-ack support will be required for upcoming
VHOST_USER_SET_STATUS request.
Note that this protocol feature was disabled by default
because Qemu version 2.7.0 to 2.9.0 had a bug causing a
deadlock when reply-ack was negotiated and multiqueue
enabled. These Qemu version are now very old and no more
maintained, so we can reasonably consider we no more
support them.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Replacing flow profile locks with RSS profile locks in the function to
remove all RSS rules for a given VSI. This is to align the locks used
for RSS rule addition to VSI and removal during VSI teardown to avoid
a race condition owing to several iterations of the above operations.
In function to get RSS rules for given VSI and protocol header replacing
the pointer reference of the RSS entry with a copy of hash value to
ensure thread safety.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
set_rss_lut failed due to incorrect vsi_id mask. vsi_id is 10 bit
but mask was 0x1FF whereas it should be 0x3FF.
For vsi_num >= 512, FW set_rss_lut has been failing with return code
EACCESS (vsi ownership issue) because software was providing
incorrect vsi_num (dropping 10th bit due to incorrect mask) for
set_rss_lut admin command
Fixes: a90fae1d07 ("net/ice/base: add admin queue structures and commands")
Cc: stable@dpdk.org
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In order to find proper dummy packets for switch filter,
it need to check ipv4 next protocol number, if it is 0x06,
which means next payload is TCP, we need to use TCP
format dummy packet.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch add support to get tunnel type of recipe
after get recipe from FW. This will fix the issue in
function ice_find_recp() for tunnel type comparing.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add FDIR support for MAC_IPV6_GTPU type with outer IPv6 address, teid
and qfi fields matching.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The grst_delay variable in ice_check_reset contains the maximum time
(in 100 msec units) that the driver will wait for a reset event to
transition to the Device Active state. The value is the sum of three
separate components:
1) The maximum time it may take for the firmware to process its
outstanding command before handling the reset request.
2) The value in RSTCTL.GRSTDEL (the delay firmware inserts between first
seeing the driver reset request and the actual hardware assertion).
3) The maximum expected reset processing time in hardware.
Referring to this total time as "grst_delay" is misleading and
potentially confusing to someone checking the code and cross-referencing
the hardware specification.
Fix this by renaming the variable to "grst_timeout", which is more
descriptive of its actual use.
Signed-off-by: Nick Nunley <nicholas.d.nunley@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
System diagnostic solution extend the ability to fetch FW
internal status data and error indication.
Signed-off-by: Sharon Haroni <sharon.haroni@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add outer IP address fields while generating the training packets for
GTPU, so that we can support FDIR based on outer IP of GTPU.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The ice_discover_caps function is used to read the device and function
capabilities, updating the hardware capabilities structures with
relevant data.
The exact number of capabilities returned by the hardware is unknown
ahead of time. The AdminQ command will report the total number of
capabilities in the return buffer.
The current implementation involves requesting capabilities once,
reading this returned size, and then re-requested with that size.
This isn't really necessary. The firmware interface has a maximum size
of ICE_AQ_MAX_BUF_LEN. Firmware can never return more than
ICE_AQ_MAX_BUF_LEN / sizeof(struct ice_aqc_list_caps_elem) capabilities.
Avoid the retry loop by simply allocating a buffer of size
ICE_AQ_MAX_BUF_LEN. This is significantly simpler than retrying. The
extra allocation isn't a big deal, as it will be released after we
finish parsing the capabilities.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
The profile id map lock should be held till the caller completes
all references of that profile entries.
The current code releases the lock right after the match search.
This caused a driver issue when the profile map entries were
referenced after it was freed in other thread after the lock was
released earlier.
Also return type of get/set profile functions were changed to
return the ice status instead of the profile entry pointer.
This will prevent the caller referencing the profile fields
outside the lock.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Some places were calling the meson function host_machine.system()
instead of the variables is_windows and is_linux defined
in config/meson.build.
At the same time, the missing "Linux restriction" reason is added to
pfe and octeontx2 crypto PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The macro __rte_cache_aligned is better suited for aligning
a structure on a cache line (of any size).
Fixes: 15c4318640 ("app/flow-perf: add packet forwarding support")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Wisam Jaddo <wisamm@mellanox.com>
The Meson cross file is renamed from meson_mingw.txt to cross-mingw,
and is added to test-meson-builds.sh.
The only example supported on Windows so far is "helloworld",
that's why the default list of examples is overridden.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add cross-compilation support of a PPC target in the build test matrix.
The CPU is defined as Power8, running as little endian.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
If a compiler is not found in $PATH, the compilation test is skipped.
In some cases, the compiler could be found after extending $PATH
in an environment configuration script (called by load-devel-config).
The decision to skip is deferred to a later stage, after loading the
configuration script.
In such case, the variable DPDK_TARGET, used by the configuration script
as input, is the compiler name.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Each cross-compilation case needs to define the target compiler
and the meson cross file.
Given the compiler is already defined in the cross file,
the latter is enough.
The function "build" is changed to accept a cross file alternatively
to the compiler name. In the case of a file (detected if readable),
the compiler is extracted with sed and tr, and the option --cross-file
is automatically added.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Casting thread ID to handle is not accurate way to get thread handle.
Need to use OpenThread function to get thread handle from thread ID.
pthread_setaffinity_np and pthread_getaffinity_np functions
for Windows are affected because of it.
Signed-off-by: Tasnim Bashar <tbashar@mellanox.com>
Uses SetupAPI.h functions to scan PCI tree.
Uses DEVPKEY_Device_Numa_Node to get the PCI NUMA node.
Uses SPDRP_BUSNUMBER and SPDRP_BUSNUMBER to get the BDF.
scanning currently supports types RTE_KDRV_NONE.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
the struct rte_pci_addr defines domain as uint32_t variable however
the PCI_PRI_FMT macro used for logging the struct sets the format
of domain to uint16_t.
The mismatch causes the following warning messages
in Windows clang build:
format specifies type 'unsigned short' but the argument
has type 'uint32_t' (aka 'unsigned int') [-Wformat]
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Added <sys/types.h> in rte_pci header file
to include off_t type since it is missing for Windows.
Define the implementation of the Linux function rte_pci_get_sysfs_path
in pci_common.c for Linux OS only as it is unneeded for other OSs
and to avoid the warning on deprecated call to getenv() on Windows:
"warning: 'getenv' is deprecated: This function or variable may be unsafe.
Consider using _dupenv_s instead."
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Changing all of PCIs Unix memory mapping to the
new memory allocation API wrapper.
Change all of PCI mapping function usage in
bus/pci to support the new API.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
