Added documentation for the new armv8 targets supported in 19.05 release.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add user guide on debugging and troubleshooting for common
issues and bottleneck found in the sample application model.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add svg images for debug and troubleshoot guide.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
rte_hash_hash is multi-thread safe but not multi-process safe
because of the use of function pointers. Previous document
and comment says the other way around. This commit fixes
the issue.
Fixes: fc1f2750a3 ("doc: programmers guide")
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Cc: stable@dpdk.org
Reported-by: Andrey Nikolaev <gentoorion@gmail.com>
Suggested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Remove references to the (deleted) rte_event_port_enqueue_depth()
function in the Doxygen comments for rte_event_enqueue_burst() and
friends, and replace with references to rte_event_port_attr_get().
Fixes: 78ffab9611 ("eventdev: add port attribute function")
Fixes: c9bf83947e ("eventdev: add eth Tx adapter APIs")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Rather than call nm on the test application binary for each test to
consider, call it once at the object init.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
This test has been removed by the commit 83945fbd7c ("test: remove
devargs unit tests") which left some trace in meson and reintroduced in
autotest by the second commit 9eabcb6824 ("test: update autotest
list").
Fixes: 83945fbd7c ("test: remove devargs unit tests")
Fixes: 9eabcb6824 ("test: update autotest list")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This reverts commit bdca79053b.
Not all PMDs support the fixed link speed set, and link speed can be set
even with auto negotiation enabled. Reverting the patch to not break
existing usage.
Fixes: bdca79053b ("app/testpmd: set fixed flag for exact link speed")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
When dev_close is called, the netvsc driver will clean up all
queues including the primary ring buffer.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Redo the receive logic to set m->port on packets received on VF.
When using VF, still need to check for packets and completions
arriving on the VMBus path even if application is not doing bursting
(ie n_rx == 0).
Also, fix comment.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The driver supports VLAN filtering, but the option is not included in
the advertised list of capabilities. Thus any attempt to enable VLAN
filtering always fails. Update the list of offload capabilities to
include DEV_RX_OFFLOAD_VLAN_FILTER.
Fixes: 95e4a96ccb ("net/vmxnet3: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Mark Gillott <mgillott@vyatta.att-mail.com>
Acked-by: Yong Wang <yongwang@vmware.com>
When secondary to primary process synchronization occurs
there is no check for number of fds which could cause buffer overrun.
Bugzilla ID: 252
Fixes: c9aa56edec ("net/tap: access primary process queues from secondary")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The RDMA-CORE Direct Rules API was changed in latest upstream code
This commit update the API accordingly.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
BlueField SmartNIC has 0xa2d2 as PCI device ID on both ARM and x86 host. On
ARM side, Tx inlining need not be used as PCI bandwidth is not bottleneck.
Vectorized Tx can still be used up to 16 queues. For other archs
(e.g., x86), keep using the default value.
Fixes: 09d8b41699 ("net/mlx5: make vectorized Tx threshold configurable")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
If Tx packet inlining is enabled, rdma-core library should allocate large
Tx WQ enough to support it. It is better for PMD to calculate the size of
WQ based on the parameters and return error with appropriate message if it
exceeds the device capability.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When creating a flow rule without the port_id pattern item, always the
PF was selected.
This commit fixes this issue, if no port_id pattern item is available
then we use the port that the flow was created on as source port.
Fixes: 822fb31953 ("net/mlx5: add port id item to Direct Verbs")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
If disable LSC when launching testpmd with X722, shown
link speed is 20G but not 10G. It's caused by wrongly
parsed link speed.
Correct it according to X722 datasheet.
Fixes: eef2daf2e1 ("net/i40e: fix link update no wait")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix test_set_bonded_port_initialization_mac_assignment so that it works
after 're run' test_link_bonding.
Fixes: f2ef6f21ee ("bond: fix mac assignment to slaves")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Chas Williams <chas3@att.com>
Since 18.11, it is suggested that driver should release all its private
resources at the dev_close routine. So all resources previously released
in remove routine are now released at the dev_close routine, and the
dev_close routine will be called in driver remove routine in order to
support removing a device without closing its ports.
Above behavior changes are supported by setting RTE_ETH_DEV_CLOSE_REMOVE
flag during probe stage.
Also as af_xdp pmd doesn't allocate MAC addresses dynamically, it needs
to be set as NULL, so it won't be released by rte_eth_dev_release_port()
otherwise, there would be "EAL: Error: Invalid memory" error.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
ibv_destroy_flow_action() refers to QP. QP must not be freed until
corresponding action is destroyed.
Fixes: 3eb0044310 ("net/mlx5: fix release of jump to queue action")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Found by Coverity scan - dead code
Coverity issue: 337665
Fixes: 7943ba05f6 ("net/atlantic: add link status and interrupt management")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Found by Coverity scan, two pointer args should be not zero checked
Coverity issue: 337929
Fixes: 2f40244b39 ("net/atlantic: implement MACsec firmware interface")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Its better to use capability bits FW provides to detect whether
firmware has APIs for EEPROM access.
Before that explicit FW version comparison was used and that may
cause conflicts.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Driver should track negotiated PHY flow control settings during
link state changes and update MAC level flow control configuration.
Otherwise there could be unexpected pause frames generation which
could lockup the datapath.
Fixes: 4c1c8f7646 ("net/atlantic: add flow control configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
EEPROM write accesses start using non zero configuration memory
accesses. This revealed an issue where firmware interface was actually
always did the uploads starting with zero offset
Fixes: 86d36773bd ("net/atlantic: implement firmware operations")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Clients may not filling magic field, thus causing garbage
to be passed as a device address.
Limit that to maximum SMbus address.
Fixes: ce4e8d4180 ("net/atlantic: implement EEPROM get/set")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Maximum size should be 256 bytes.
Move declaration to the top of the file
Fixes: ce4e8d4180 ("net/atlantic: implement EEPROM get/set")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
EEPROM get/set offset logic should take offset into account.
Data transfers to/from FW should also correctly use
dword based transfer interface, taking into account the
remainder.
We also check error code returned from FW.
Fixes: ce4e8d4180 ("net/atlantic: implement EEPROM get/set")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Make indentation correct. No functional impact.
Fixes: f73061d53b ("net/atlantic: use EEPROM magic as a device address")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Broadcast was not correctly and fully initialized
Fixes: 7906661eda ("net/atlantic: add b0 hardware layer")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Since this driver does not distinguish unicast/multicast addresses,
applications could always rely on the standard MAC add/remove/set
interface to configure both types.
As a result, the multicast address list interface never got implemented
(rte_eth_dev_set_mc_addr_list()) however PMD-agnostic applications still
rely on it for compatibility reasons; a wrapper is therefore required.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Mellanox mlx5 PMD implements the list of devices to process the memory
free events to reflect the actual memory state to Memory Regions.
Because this list contains the devices and devices may share the
same context the callback routine may be called multiple times
with the same parameter, that is not optimal. This patch modifies
the list to contain the device contexts instead of device objects
and shared context is included in the list only once.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The multiport Infiniband device support was introduced [1].
All active ports, belonging to the same Infiniband device use the single
shared Infiniband context of that device and share the resources:
- QPs are created within shared context
- Verbs flows are also created with specifying port index
- DV/DR resources
- Protection Domain
- Event Handlers
This patchset adds support for Memory Regions sharing between
ports, created on the base of multiport Infiniband device.
The datapath of mlx5 uses the layered cache subsystem for
allocating/releasing Memory Regions, only the lowest layer L3
is subject to share due to performance issues.
[1] http://patches.dpdk.org/cover/51800/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
There are some physical link settings can be queried from
Ethernet devices: link status, link speed, speed capabilities,
duplex mode, etc. These setting do not make a lot of sense for
representors due to missing physical link. The new kernel drivers
dropped query for link settings for representors causing the
ioctl call to fail. This patch adds some kind of emulation
of link settings to PMD - representors inherit the link parameters
from the master device. The actual link status (up/down)
is retrieved from the representor device.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When creating the modify action using Direct Rules, we need to
add flags to mark, if the action will be done on root table or on
private table.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The RX stats will increase even no packets sent, this patch fix this issue
by modifying ipackets and ibytes statistics based on vsi instead of port
to avoid statistics error.
Fixes: a37bde5631 ("net/ice: support statistics")
Cc: stable@dpdk.org
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Identified by LGTM, the loop was incorrectly incrementing a different
variable and conditional on another.
Fixes: fe2b986ac6 ("net/dpaa2: support generic flow")
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Fix the potential overflow in expression 1 << begin by using 1ULL.
Coverity issue: 279437, 279445
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
'rte_eth_dev_get_port_by_name()' return value is not checked caught by
coverity, adding return value check.
Coverity issue: 305853
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The ring name is passed in as part of this drivers API, but it
doesn't check that the name is not truncated.
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Fixes: e1e4017751 ("ring: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Don't hard code string length in two place; use sizeof() instead.
Ring name should use RTE_RING_NAMESIZE.
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Whitespace fixes to bring inline with current DPDK style.
Fixes: e1e4017751 ("ring: add new driver")
Fixes: a74a99bbb8 ("ring: free rings when detaching device")
Fixes: 61934c0956 ("ring: convert to use of PMD_REGISTER_DRIVER and fix linking")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix the issues reported by Coverity check, "Null-checking
vsi suggests that it may be null, but it has already been
dereferenced on all paths leading to the check."
Coverity issue: 328509, 328519, 328523
Fixes: e0dcf94a0d ("net/ice: support VLAN ops")
Fixes: ff963bfa7c ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Rx queue setup function checks configured MTU to make sure that
no oversized packets can be received. But a following call to
set MTU function might make this check irrelevant.
Add a function to check MTU size against Rx buffer size and
additional Rx queue info, including Rx scatter offload.
Fixes: e961cf425e ("net/sfc: support MTU change")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
