Following commands of syn filter are removed:
- add_syn_filter (port_id) priority (high|low) queue (queue_id)
- remove_syn_filter (port_id)
- get_syn_filter (port_id)
New command is added for syn filter by using filter_ctrl API and new
syn filter structure:
- syn_filter (port_id) (add|del) priority (high|low) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Following commands of flex filter are removed:
- add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
priority (prio_value) queue (queue_id)
- remove_flex_filter (port_id) index (idx)
- get_flex_filter (port_id) index (idx)
New command is added for flex filter by using filter_ctrl API and new flex filter structure:
- flex_filter (port_id) (add|del) len (len_value) bytes (bytes_value) mask (mask_value)
priority (prio_value) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Function to get rx/tx port configuration from the PMDs
was added in previous release to simplify the port configuration
in all sample apps, but testpmd was not modified.
This patch makes testpmd get the default rx/tx port configuration,
but still uses the parameters passed by the command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Following commands of ethertype filter are removed:
- add_ethertype_filter (port_id) ethertype (eth_value)
- remove_ethertype_filter (port_id) index (idx)
- get_ethertype_filter (port_id) index (idx)
New command is added for ethertype filter by using filter_ctrl API and new
ethertype filter structure:
- ethertype_filter (port_id) (add|del) (mac_addr|mac_ignr)
(mac_address) ethertype (ether_type) (drop|fwd) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The port mask parsing in testpmd allowed up to 64 bits to be processed,
even if RTE_MAX_ETHPORTS is set to a max of 32. Fix this by only
processing up to min(RTE_MAX_ETHPORTS,64) bits of the mask.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Use endianness detection factorized in EAL.
The comment about arpa/inet.h is not valid anymore since
commit d07180f211 ("net: fix conflict with libc").
The macro _htons could also be moved in rte_byteorder.h
by providing some constant byte swapping.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Since commit 8a387fa85f ("ethdev: more RSS flags") in DPDK 1.7,
RSS flags have increased.
According to rss_hf definition in rte_eth_rss_conf, it shall be uint64 type.
Using uint16 will get truncated value, and cause incorrect output. This
fix corrected this issue.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch fixes compiling problems on IBM Power architecture and turn
on the test-pmd compiling option in configuration file. Actually, this
is an big endian compiling fix.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The csum forward engine was becoming too complex to be used and
extended (the next commits want to add the support of TSO):
- no explaination about what the code does
- code is not factorized, lots of code duplicated, especially between
ipv4/ipv6
- user command line api: use of bitmasks that need to be calculated by
the user
- the user flags don't have the same semantic:
- for legacy IP/UDP/TCP/SCTP, it selects software or hardware checksum
- for other (vxlan), it selects between hardware checksum or no
checksum
- the code relies too much on flags set by the driver without software
alternative (ex: PKT_RX_TUNNEL_IPV4_HDR). It is nice to be able to
compare a software implementation with the hardware offload.
This commit tries to fix these issues, and provide a simple definition
of what is done by the forward engine:
* Receive a burst of packets, and for supported packet types:
* - modify the IPs
* - reprocess the checksum in SW or HW, depending on testpmd command line
* configuration
* Then packets are transmitted on the output port.
*
* Supported packets are:
* Ether / (vlan) / IP|IP6 / UDP|TCP|SCTP .
* Ether / (vlan) / IP|IP6 / UDP / VxLAN / Ether / IP|IP6 / UDP|TCP|SCTP
*
* The network parser supposes that the packet is contiguous, which may
* not be the case in real life.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
In testpmd the rte_port->tx_ol_flags flag was used in 2 incompatible
manners:
- sometimes used with testpmd specific flags (0xff for checksums, and
bit 11 for vlan)
- sometimes assigned to m->ol_flags directly, which is wrong in case
of checksum flags
This commit replaces the hardcoded values by named definitions, which
are not compatible with mbuf flags. The testpmd forward engines are
fixed to use the flags properly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Test command is added to configure flexible payload
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
test command added to configure flexible mask
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As 40G NIC supports different sizes (128/512/64 entries) of
redirection table from that (128 entries) of 1G and 10G NICs,
support of multiple sizes of redirection table is needed.
It includes,
* Redefine 'struct rte_eth_rss_reta' in ethdev.
- To 'struct rte_eth_rss_reta_entry64' which contains 64
entries and 64 bits mask.
- Array of above new structure can be used for any number of
redirection table entries, as long as the number is multiple
of 64. This is quite flexible for the future expanding of
redirection table.
* Redefinition of relevant interfaces in ethdev.
- Interface of reta update has been redefined with new parameters.
- Interface of reta query has been redefined with new parameters.
* Rework of 1G PMD in igb.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 10G PMD in ixgbe.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 40G PMD (PF only) in i40e.
- reta update has been reworked.
- reta query has been reworked.
* Implement relevant commands in testpmd.
Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Erlu Chen <erlu.chen@intel.com>
Add test cases in testpmd to test VxLAN Tx checksum offload, which includes
- IPv4 and IPv6 packet
- outer L3, inner L3 and L4 checksum offload for Tx side.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add a new token in "show port" command to dump the extended statistics
of a device. It validates the new xstats framework added in previous commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The offload flags field (ol_flags) was 16-bits and had no further room
for expansion. This patch increases the field size to 64-bits, using up
the remaining reserved space in the single-cache-line mbuf.
NOTE: none of the values for existing flags have been changed, i.e. no
new numbers have been explicitly reserved between existing flag
definitions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The API provides functions to start/stop specific RX/TX queues (see 0748be2).
This change adds command in testpmd to start/stop specific RX/TX queues.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Reviewed-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Changchun Ouyang <changchun.ouyang@intel.com>
Reviewed-by: Huawei Xie <huawei.xie@intel.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
i40e supports 16 and 32 bytes RX descriptors which can be configured.
It needs to check the driver type and the configuration to determine
if 16 or 32 bytes RX descriptors is being used, for reading and
displaying the different sizes of RX descriptors.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Take avantage of the .set_mtu ethdev function and make it possible to configure
MTU on devices using testpmd.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
i40e supports both 16 and 32 bytes RX descriptors, while ixgbe and
igb support 16 bytes size only. Code changes have been made in
test-pmd to support both 16 and 32 bytes RX descriptors according
to the configuration in config files.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
To support i40e, new ops has been added to support setting
port based vlan insertion.
New command 'tx_vlan set pvid port_id vlan_id (on|off)'
has been added in testpmd to configure port based vlan insertion.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Split input error stats to have a better understanding of why packets
have been dropped.
Keep ierrors field untouched for backward compatibility.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add the command "port config X rss-hash-key key" in the 'testpmd'
application to configure the RSS hash key used to compute the RSS
hash of input [IP] packets received on port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the
current configuration of the RSS functions and/or of the RSS key used
by a NIC to compute the RSS hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
returning the RSS hash configuration.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the
igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS
hash configuration of ixgbe and igb controllers respectively.
3) Add the command "show port X rss-hash [key]" in the testpmd application
to display the RSS hash configuration of port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new specific packet processing engine in the "testpmd" application that
only replies to ARP requests and to ICMP echo requests.
For this purpose, a new "icmpecho" forwarding mode is provided that can be
dynamically selected with the following testpmd command:
set fwd icmpecho
before starting the receipt of packets on the selected ports.
Then, the "icmpecho" engine performs the following actions on all received
packets:
- replies to a received ARP request by sending back on the RX port a ARP
reply with a "sender hardware address" field containing the MAC address
of the RX port,
- replies to a ICMP echo request by sending back on the RX port a ICMP echo
reply, swapping the IP source and the IP destination address in the IP
header,
- otherwise, simply drops the received packet.
When replying to a received packet that was encapsulated into a VLAN tunnel,
the reply is sent back with the same VLAN identifier.
By default, the testpmd configures VLAN header stripping RX option on each
port.
This option is not managed by the icmpecho engine which won't detect
packets that were encapsulated into a VLAN.
To address this issue, the VLAN header stripping option must be previously
switched off with the following testpmd command:
vlan set strip off
When the "verbose" mode has been set with the testpmd command
"set verbose 1", the "icmpecho" engine displays informations about each
received packet.
The "icmpecho" forwarding engine can also be used to simply check port
connectivity at the hardware level (check that cables are well-plugged)
and at the software level (receipt of VLAN packets, for instance).
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Having a function to list forwarding engines helps to show them
in cli help and in parameters usage witout duplicating code.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
This commits adds a new "loop" option to the --port-topology argument. With
the loop option specified, ingress traffic is simply transmitted back on the
same interface.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The socket_id member of struct rte_port is an unsigned int while the d
conversion specifier of printf expects an int.
The addr_bytes member of struct ether_addr is an array of uint8_t
while the X conversion specifier of printf expects an unsigned int.
Values of type uint8_t are promoted to type int when used in the
ellipsis notation of a function.
These minor bugs were found using TrustInSoft Analyzer.
Signed-off-by: Julien Cretin <julien.cretin@trust-in-soft.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Now socket id is from device's numa_node, if it is invalid, just set it to 0
as default to avoid crash which will be caused by the reference to
port_per_socket[socket_id].
Also one warning is displayed to user that port-numa-config and
ring-numa-config parameters should be used along with --numa for NUMA mode.
A check for NUMA_NO_CONFIG was also missing from init_fwd_stream().
Signed-off-by: Liu Xiaofeng <xiaofeng.liu@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add into the `rte_eth_stats` data structure 4 (64-bit) counters
of XOFF/XON pause frames received and sent on a given port.
Update em, igb, and ixgbe drivers to return the value of the 4 XOFF/XON
counters through the `rte_eth_stats_get` function exported by the DPDK
API.
Display the value of the 4 XOFF/XON counters in the `testpmd` application.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This adds a new forwarding mode to testpmd, whereby it will forward
packets, but on a transmit failure, it will wait a small amount of time
before retrying the transmit again. This mode can be useful in some
cases to set a zero-packet loss rate at the cost of overall throughput,
especially in cases where TX ring size/buffering is constrained, such as
with virtio.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Core support for using the Intel DPDK with Xen Dom0 - including EAL
changes and mempool changes. These changes encompass how memory mapping
is done, including support for initializing a memory pool inside an
already-allocated block of memory.
KNI sample app updated to use KNI close function when used with Xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Need to change PCI code to support multiple I/O regions on a single device.
Some devices like VMXNET3 have multiple PCI memory regions, and some
have none.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Intel
