Secondary process needs to close device to release process private
resources. But secondary process should not be obliged to wait for
device stop before closing ethdev.
Fixes: febc855b35 ("ethdev: forbid closing started device")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The MAC address is accessed via the representor ethdev's one.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The board admin may need to assign a MAC address to a guest
VNIC identified by its MCDI handle. Provide an API for that.
In the case when a libefx-based driver is used at the guest,
it will need to check its MAC address using the symmetrical
API if the admin has tweaked it by means of its representor.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
When the driver queries its PCIe interface type via MCDI,
the value from the response is translated to an EFX enum.
When the driver passes this enum value back to any other
MCDI helper, the inverse translation has to be conducted.
Fixes: 1bf9ff57cc ("common/sfc_efx/base: allow getting VNIC MCDI client handles")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce a testpmd API so that drivers can register specific commands.
A driver can list some files to compile with testpmd, by setting them
in the testpmd_sources (driver local) meson variable.
drivers/meson.build then takes care of appending this to a global meson
variable, and adding the driver to testpmd dependency.
Note: testpmd.h is fixed to that it is self sufficient when being
included.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
All those symbols don't need to be global, plus it was hiding unused
code such as:
- cmd_set_conntrack_dir_set and cmd_set_conntrack_dir_conntrack in
cmdline.c,
- cmd_create_port_meter_g_action, cmd_create_port_meter_r_action,
cmd_create_port_meter_y_action in cmdline_mtr.c,
Mark those symbols as static.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Add support for module EEPROM information format defined in
SFF-8636 Rev 2.7.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8472 Rev 12.0
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for module EEPROM information format defined in
SFF-8079 Rev 1.7.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for SFF-8024 Rev 4.0 of pluggable I/O configuration
and some common utilities for SFF-8436/8636 and SFF-8472/8079.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add a new telemetry command /ethdev/module_eeprom to dump the module
EEPROM of each port. The format of module EEPROM information follows
the SFF(Small Form Factor) Committee specifications.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The packet type is set even if it is a fragmented packet.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Currently the driver assumes that the size of the RETA table is
four times the number of Rx queues at multiple places. However,
it sets it to four times the maximum number of queues (4 * 32 = 128)
when it first initializes the device. Change the other uses to use
the stored value, not the assumed default.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
VMXNET3 version 6 supports some new features, including but not limited to:
- Increased maximum MTU up to 9190
- Increased maximum number of Rx and Tx queues
- Removes power-of-two limitations on queue sizes
- Extended interrupt structures (required for additional queues)
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Support rte_eth_dev_fw_version_get() API.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Driver callbacks initialization should follow callbacks order in the
structure definition.
Do not reorder callbacks implementation to avoid extra noise in
the code.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Count the number of entries in the Rx queue for debugging.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Add RETA query and RETA update support for VMXNET3.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
The help message of create meter command is incomplete,
lack of policy_id param, update help string.
Fixes: f29fa2c59b ("app/testpmd: support policy actions per color")
Cc: stable@dpdk.org
Signed-off-by: Jin Liu <jin.liu@corigine.com>
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
"vlan set strip off 0" can't work, due to the incorrect usage
of the mask, it just represent that the status is changed or not,
not represent offloaded or not, so that the driver send the
error control message to the nic.
Now, by first inspect the mask of things that changed, and then
change the requested state if VLAN stripping according the
requested offload status. So this change can fix this bug.
Fixes: d4a27a3b09 ("nfp: add basic features")
Cc: stable@dpdk.org
Signed-off-by: Peng Zhang <peng.zhang@corigine.com>
Signed-off-by: Yong Xu <yong.xu@corigine.com>
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Hardware restrictions require a maximum of 4 queues for every pool.
Fixes: a6712cd029 ("net/txgbe: add PF module init and uninit for SRIOV")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Add to read efuse values from flash, and disable EEE to improve signal
quality. Remove PHY semaphore to access PHY registers faster. And remove
unnecessary page selection where quick access is required.
When rte_eth_link_get_nowait() is called frequently with LSC disabled by
self-developed applications, eventually the PHY status register will be
accessed frequently. It will cause internal PHY init failure, if they
are done simultaneously. So there is a protection added for internal PHY
init.
Fixes: 3518df5774 ("net/ngbe: support device start/stop")
Fixes: 91bc12c522 ("net/ngbe: optimize PHY initialization process")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
When using mailbox to request firmware to enable or disable PCIe bus
master, there is a small probability that mailbox cannot respond.
Change to use rte_pci_read_config() and rte_pci_write_config(), to
avoid this problem.
Fixes: ac6c5e9af5 ("net/ngbe: fix Tx hang on queue disable")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
For M88E1512 PHY mixed mode, PXE driver overrides PHY mode at load
time. To workaround this problem, change to read PHY mode from flash
instead of register.
Fixes: 1c44384fce ("net/ngbe: support custom PHY interfaces")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
External PHY cannot power down after LAN reset, so need to manually
power down when device stopped.
Fixes: 3d0af70667 ("net/ngbe: setup PHY link")
Fixes: 1c44384fce ("net/ngbe: support custom PHY interfaces")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Change to check low ID register to determine the valid PHY address,
for yt8521s PHY with high ID register value 0. And fix polling
register when expect value is 0, to complete MDIO read.
Fixes: 44e97550ca ("net/ngbe: identify and reset PHY")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since the bit of ETH_LINK_SPEED_FIXED was set for the force link
speed, it conflicts with '~allowed_speeds'.
Fixes: 3518df5774 ("net/ngbe: support device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Currently, 'dev_started' is always set to be 0 when dev stop, whether
it succeeded or failed. This is unreasonable and this patch fixed it.
Fixes: 62024eb827 ("ethdev: change stop operation callback to return int")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The 'dst_off' was reset in multi segment case.
This caused memif buffer segment to write to
beginning of mbuf, overwriting previous data.
Fix it with this patch.
Fixes: 09c7e63a71 ("net/memif: introduce memory interface PMD")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Usage of 'RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE' offload has two
constraints: per-queue all mbufs comes from the same mempool and
has refcnt = 1.
Bonding mode Broadcast, Tx mbuf has more than one refcnt.
Bonding mode 8023AD, It contains two mempools separately for LACP
packets and other packets. In Tx or Rx, Fast mbuf free will operate
mbuf from different mempool.
This patch will prevent 'RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE' offload
when in bonding mode Broadcast and mode 8023AD.
Fixes: 78aecefed9 ("bond: move param parsing in configure step")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Calling Rx/Tx functions on a stopped queue is not supported.
Do not run packet forwarding for streams that use stopped queues.
Each stream has a read-only "disabled" field,
so that lcore function can skip such streams.
Forwarding engines can set this field
using a new "stream_init" callback function
by checking relevant queue states,
which are stored along with queue configurations
(not all PMDs implement rte_eth_rx/tx_queue_info_get()
to query the state from there).
Fixes: 5f4ec54f1d ("testpmd: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When a port was closed, indirect actions could remain
with their handles no longer valid.
If a newly attached device was assigned the same ID as the closed port,
those indirect actions became accessible again.
Any attempt to use them resulted in an undefined behavior.
Automatically flush indirect actions when a port is closed.
Fixes: 4b61b8774b ("ethdev: introduce indirect flow action")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Whether it is allowed to call Rx/Tx functions for a stopped queue
was undocumented. Some PMDs make this behavior a no-op
either by explicitly checking the queue state
or by the way how their routines are implemented or HW works.
No-op behavior may be convenient for application developers.
But it also means that pollers of stopped queues
would go all the way down to PMD Rx/Tx routines, wasting cycles.
Some PMDs would do a check for the queue state on data path,
even though it may never be needed for a particular application.
Also, use cases for stopping queues or starting them deferred
do not logically require polling stopped queues.
Use case 1: a secondary that was polling the queue has crashed,
the primary is doing a recovery to free all mbufs.
By definition the queue to be restarted is not polled.
Use case 2: deferred queue start or queue reconfiguration.
The polling thread must be synchronized anyway,
because queue start and stop are non-atomic.
Prohibit calling Rx/Tx functions on stopped queues.
Fixes: 0748be2cf9 ("ethdev: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Add macro MIN_TOTAL_NUM_MBUFS (1024) to indicate
what the value of total-num-mbufs should bigger than.
Fixes: c87988187f ("app/testpmd: add --total-num-mbufs option")
Cc: stable@dpdk.org
Signed-off-by: Mingxia Liu <mingxia.liu@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
The return value of rte_tel_data_alloc() may be null pointer.
Add missing check vs null.
Fixes: 5ea354a1f2 ("net/cnxk: support telemetry")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The rte_tel_data_alloc() may return NULL, so the caller should add
judgement for it.
Fixes: 083b0b310b ("ethdev: add common stats for telemetry")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently axgbe PMD
returns zero when xstats is null.
Remove the logic of "return zero when xstats is NULL", and add the logic
of "return the required number of entries when n is lower than the
required number of entries".
Fixes: 9d1ef6b2e7 ("net/axgbe: add xstats")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently mvpp2 PMD
returns zero when xstats is null.
Remove the logic of "return zero when xstats is NULL", and add the logic
of "return the required number of entries when n is lower than the
required number of entries".
Fixes: a77b5378cd ("net/mrvl: add extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently ipn3ke PMD
returns zero when xstats is null.
Dedicated check for xstats vs null is not required, since ethdev layer
guarantees that it may be null only if number of entries n is 0 (which
is definitely smaller than total xstats count).
Fixes: 5a6d883878 ("net/ipn3ke: implement statistics")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently hns3 PMD
returns zero when xstats is null.
Dedicated check for xstats vs null is not required, since ethdev layer
guarantees that it may be null only if number of entries n is 0 (which
is definitely smaller than total xstats count).
Fixes: 8839c5e202 ("net/hns3: support device stats")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When xstats location is null in rte_eth_xstats_get() the return value
is not clearly specified. Some PMDs (eg. hns3/ipn3ke/mvpp2/axgbe) return
zero while others return the required number of elements.
In this patch, special parameter combinations are restricted:
1. highlight that xstats location may be null if and only if n is 0.
2. amend n parameter description to specify that if n is lower than
the required number of elements, the function returns the required
number of elements.
3. specify that if n is zero, the xstats must be NULL, the function
returns the required number of elements (a duplicate which should
help to not very attentive readers).
Add sanity check for null xstats and non-zero n case on API level to
make it unnecessary to care about it in drivers.
Fixes: ce757f5c9a ("ethdev: new method to retrieve extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Parameters to this static helper can't be NULL.
str has already been dereferenced in caller.
dst and size point to variable in stack.
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The GRO/GSO library doesn't re-calculate checksums for
merged/fragmented packets. If users want the packets to
have correct IP checksums, they should select HW IP
checksum calculation for the port which the packets are
transmitted to. But if the port doesn't support HW IP
checksum, users may perform a SW IP checksum.
Fixes: b7091f1dcf ("app/testpmd: enable the heavyweight mode TCP/IPv4 GRO")
Fixes: 52f38a2055 ("app/testpmd: enable TCP/IPv4 VxLAN and GRE GSO")
Cc: stable@dpdk.org
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
