bnxt PMD uses the macro BNXT_SUPPORTED_SPEEDS to validate
the user requested speed. But this has all the speed values
supported by the PMD and is not chip specific.
The check against this macro returns success when the user
tries set the speed to 100G on a port even if the chip does
not support 100G speed.
Fixed it to use bnxt_get_speed_capabilities() to check the
supported speeds by the chip.
Fixes: 1d0704f4d793 ("net/bnxt: add device configure operation")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix to allocate bnxt ulp context when TRUFLOW is enabled.
This patch reduces the size of struct bnxt.
Fixes: 313ac35ac701 ("net/bnxt: support ULP session manager init")
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are maintaining MAC address twice which is unnecessary.
This patch removes the copy which helps reduce size of bnxt structure.
Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to maintain local copy.
This helps reduce the size of the bnxt structure.
Fixes: fcc0aa1edc10 ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Consolidate flow stat related structs for performance improvement.
The intention of this patch is to reduce the size struct bnxt which
had grown because of recent changes and was impacting performance.
Fixes: 02a95625fe9c ("net/bnxt: add flow stats in extended stats")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Newer firmware advertises the number of TQM rings to allocate
context memory for. Use the firmware specified value and fall back
to the old value derived from "bp->max_q" if it is not available.
Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Max Rx Ring count could be < Max stat contexts. While accounting
for stat contexts, this should be also considered and
the max ring count adjusted accordingly.
Fixes: f03e66cb64ce ("net/bnxt: limit queue count for NS3/Stingray devices")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Firmware reports any fatal error (either ASIC or Firmware related) via a
new status register. This status register can provide more detailed
information about the firmware errors, especially if error occurs before
HWRM_VER_GET is issued. Attempt to map this register if it is present
and check for firmware status when VER_GET command fails.
Refactored the code to allocate the "bp->recovery_info" structure
in bnxt_init_fw() instead of doing in bnxt_hwrm_error_recovery_qcfg().
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FW returns HWRM_ERR_CODE_HOT_RESET_PROGRESS(0xa) when it is
unable to process a specific cmd while hot reset is in progress.
Host driver is expected to keep retrying the cmd for 2s with
a gap of 50ms between each retrial.
Also, fixed to fail port start if the HWRM_FUNC_DRV_IF_CHANGE
still returns error after 2 seconds.
Fixes: 0b533591238f ("net/bnxt: inform firmware about IF state changes")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The ulp flow flush has been extended to support session flow
flush and function flow flush. The session flow flush is called when
there the device is sole owner of the session and it deletes all the
flows associated with that session. The function flow flush is
called if the device function is not the sole owner of the session,
it deletes all the flows that are associated with that device
function.
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
This patch allows to display flow stats in extended stats.
To do this, DMA-able memory is registered with the FW during device
initialization. Then the driver uses an alarm thread to query the
per flow stats using the HWRM_CFA_COUNTER_QSTATS HWRM command at
regular intervals and stores it locally which will be displayed
when the application queries the xstats.
The DMA-able memory is unregistered during driver cleanup.
This functionality can be enabled using the flow-xstat devarg and
will be disabled by default. The intention behind this is to allow
stats to be displayed for all the flows in one shot instead of
querying one at a time.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
A ULP session will contain all the resources needed to support
rte flow offloads. A session is initialized as part of rte_eth_device
start. A DPDK application can have multiple interfaces which
means rte_eth_device start will be called for each of these devices.
ULP session manager will make sure that a single ULP session is only
initialized once. Apart from this, it also initializes MARK database,
EEM table & flow database. ULP session manager also manages a list of
all opened ULP sessions.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This feature can be enabled by passing
"-w 0000:0d:00.0,host-based-truflow=1” to the DPDK application.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
VNIC is needed for the driver to program the action record for rx
flows. VNIC determines what receive rings to use to place the received
packets. This patch introduces a routine that will convert a given
dpdk port to VNIC.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
SVIF (source virtual interface) is used to represent a physical port,
physical function, or a virtual function. SVIF is compared during L2
context and exact match lookups in TX direction. SVIF is masked for
port information during L2 context and exact match lookup in RX direction.
Hence, driver needs this SVIF information to program L2 context and Exact
match tables.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Change HWRM_PREP to use pointer and use the full
HWRM enum
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
bnxt_rss_ctxts() function is declared in header file bnxt.h,
implemented in bnxt_ethdev.c, and called only in bnxt_ethdev.c.
Also many functions are declared in header file bnxt_hwrm.h,
implemented in bnxt_hwrm.c, and called only in bnxt_hwrm.c.
This patch moves these function declarations into bnxt_ethdev.c
and bnxt_hwrm.c, as static functions.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Initially when driver is loading, there is no HWRM timeout configured
by FW, the VER_GET command needs use default timeout as 500ms and
while recovering from fatal/non-fatal FW error, it should use timeout
as 50ms.
Fixes: 458f0360e8dc ("net/bnxt: get default HWRM command timeout from FW")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Certain applications(Ex: OVS-DPDK) can issue rte_flow_create with mark
id set to 0. The mark table entry creation in the driver was assuming
non-zero mark ids. Fix it to have a valid flag for each entry.
Also, it is possible that both RSS flags and cfa_code/ mark id are set
as part of the Rx packet completion descriptor if the 'action' for a
flow is MARK + RSS.
Fix Rx completion processing to look for both fields as opposed to only
either.
Fixes: 94eb699bc82e ("net/bnxt: support flow mark action")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use "dev->data->dev_started" state, instead of local "dev_stopped"
to check whether port has been started or not.
Fixes: 316e412299fd ("net/bnxt: fix crash when closing")
Cc: stable@dpdk.org
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
This change could help in reducing the size of bnxt PMD private
data structure by converting a uint8_t variable to use bit map flag.
Fixes: 5cd0e2889c43 ("net/bnxt: support NIC Partitioning")
Cc: stable@dpdk.org
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Use "dev->data->dev_started" state, instead of local BNXT_FLAG_INIT_DONE
to check whether device has been initialised or not.
Fixes: ed2ced6fe927 ("net/bnxt: check initialization before accessing stats")
Cc: stable@dpdk.org
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Allow RSS action with group ID 0. The RSS match check will ensure if
requested RSS action configuration parameters should be allowed as per
the VNIC's RSS configuration or not and if it does match as it is
by design in OVS-DPDK use case, the default vnic can be used to create
the filter. As part of this ensure that rx_queue_cnt for the default
vnic is setup during init as this field was being set only for non-zero
vnics while handling RSS action for flow create.
Check for out of bounds error while accessing the vnic array.
Fixes: adc0f81c6552 ("net/bnxt: support RSS action")
Cc: stable@dpdk.org
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Max Tx rings count could be lesser than max Rx rings in some
cases, so take this into account as well.
Account for stat contexts available(one for each ring) along with
no: of completion rings(one for each ring) to cap the max no: of
Tx /Rx rings that can be possibly created.
Fixes: f03e66cb64ce ("net/bnxt: limit queue count for NS3/Stingray devices")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In FreeBSD environment, nic_uio driver does not support interrupts
and rte_intr_callback_register() will fail to register interrupts
which in turn causes bnxt driver probe failure.
Fixed driver to ignore interrupt callback failures in FreeBSD.
Also fixed to not use a dedicated completion ring for async events
from FW and process these events on RXQ0 in FreeBSD.
Fixes: 6de4c538b393 ("net/bnxt: fix error handling in port start")
Fixes: 43f78b380f89 ("net/bnxt: retry IRQ callback deregistration")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Add support for RTE_FLOW_ACTION_TYPE_MARK.
Use the flow_id provided by FW during flow creation to lookup the
mark id provided by the application.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
We need to wait for up to 500ms to receive async event notification
after forcing link down. Similarly we need to wait for up to 10s for
link to come up after configuring the hardware for link up.
Fixes: c09f57b49c13 ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The purpose of this patch is used to add a new field "fw_cap"
in bnxt structure. The new "fw_cap" field store all the capabilities
reported by the FW. This information will help us to determine
the device capabilities when registering feature support with FW.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
During the registration process, the drivers must publish
"HOT_RESET_SUPPORTED" capability to the core firmware only
if core firmware is capable of Hot Reset.
Fixes: df6cd7c1f73a ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Cap max queue count to 128 for NS3 devices and ensure that same count
is reported as part of dev_info_get_op as well
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
On removing the slave interface, slave_remove in bonding module calls
_rte_eth_dev_reset which in turn frees both Tx and Rx queues.
1. segfault is seen after removing/adding the slave interface and starting
bond interface.
In this below path, when mtu is set for the slave interface, queues are
not created yet and driver reference to queue[0] causes the segfault.
slave_configure:
rte_eth_dev_set_mtu
rte_eth_dev_configure
rte_eth_rx_queue_setup
2. segfault is seen on starting the port after removing from bond device.
This is a testpmd bug where in, on starting the port, testpmd is supposed
to recreate the queues before starting the port.
Fixed these by adding check for queues created before accessing them.
Fixes: daef48efe5e5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Driver was setting maximum receive unit differently in bnxt_mtu_set_op
and bnxt_hwrm_vnic_alloc. Moreover firmware adds the 4 bytes for FCS.
Fixed it by setting correct maximum receive unit value.
Fixes: daef48efe5e5 ("net/bnxt: support set MTU")
Cc: stable@dpdk.org
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fix a possible that while interrupt handler is in the middle of
processing, dev_configure_op() might come in and try to destroy/realloc
the default completion ring on which interrupt completions arrive.
Synchronize the two so they don't race each other
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move device and vendor ids macro definition from bnxt_ethdev.c
to bnxt.h.
There is no functionality impact.
Fixes: 882aa9c6e2e1 ("net/bnxt: move PCI device ids to the driver")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
DPDK PCIe-VFIO framework configures base MSIX vector for interrupts
which is supported by other h/w. In case of bnxt, base MSIX vector
starts with the RX completion queue 0. To comply with the DPDK
framework We need to increase the map index by 1 so that RXTX
completion queues events can be delivered to appropriate event listeners
by kernel VFIO.
Fixes: bd0a14c99f65 ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HWRM command timeout is set to a very high value.
VER_GET command response returns the default request timeout value.
Use this value for waiting for HWRM commands to complete.
Poll for the valid bit every 1us instead of 600us.
Fixes: cbcd375d37d2 ("net/bnxt: fix HWRM macros and locking")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Thor queue scaling is currently limited by the number of NQs that
can be allocated. Fix by using a common NQ for all receive/transmit
rings instead of allocating a separate NQ for each ring.
Fixes: f8168ca0e690 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Class of Service (CoS) is a way to manage multiple types of
traffic over a network to offer different types of services
to applications. CoS classification (priority to cosqueue) is
determined by the user and configured through the PF driver.
DPDK driver queries this configuration and maps the cos queue
ids to different VNICs. This patch adds this support.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for LRO for adapters based on Thor (BCM57508).
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, there are four flow related functions, namely
bnxt_flow_create, bnxt_flow_destroy, bnxt_flow_validate,
bnxt_flow_flush. All these functions are not multi-thread safe.
This patch fixes it by synchronizing these functions with a lock.
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
We are currently creating only outer DMAC filters.
Create SMAC and inner DMAC filters using HWRM_CFA_L2_FILTER_ALLOC.
For this the HWRM_CFA_L2_FILTER_ALLOC has already been updated.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently flow creation is allowed with queue action only
when RSS is disabled. Remove this restriction. Flows can be
created when RSS is enabled.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
