This patch implements the feature described in RFC [1], adding
support of RSS action on L3 and/or L4 source or destination only.
[1] http://mails.dpdk.org/archives/dev/2019-December/152796.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Patch adds a runtime function to display the unicast and
multicast MAC addresses added to a port.
Syntax:
show port (port_id) macs|mcast_macs
Usage:
testpmd> show port 0 macs
Number of MAC address added: 1
B0:26:28:7F:F5:C1
testpmd>
testpmd> show port 0 mcast_macs
Number of Multicast MAC address added: 0
testpmd>
testpmd> mac_addr add 0 B0:26:28:7F:22:33
testpmd> mac_addr add 0 B0:26:28:7F:22:34
testpmd> show port 0 macs
Number of MAC address added: 3
B0:26:28:7F:F5:C1
B0:26:28:7F:22:33
B0:26:28:7F:22:34
testpmd>
testpmd> mac_addr remove 0 B0:26:28:7F:22:33
testpmd> show port 0 macs
Number of MAC address added: 2
B0:26:28:7F:F5:C1
B0:26:28:7F:22:34
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch implements handling mixed encrypted digest hash-cipher
requests (e.g. SNOW3G + ZUC or ZUC + AES CTR) possible when running
on GEN3 QAT. Such algorithm combinations are not supported on
GEN1/GEN2 hardware.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds minimum enqueue threshold to Intel
QuickAssist Technology PMD.
It is an optimisation, configured by a command line option,
which can be used to reduce MMIO write occurrences.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Remove the limitation whereby enqueue and dequeue must be
done in same thread.
The inflight calculation is reworked to be thread-safe for 2
threads - note this is not general multi-thread support, i.e
all enqueues to a qp must still be done in one thread and
all dequeues must be done in one thread, but enqueues and
dequeues may be in separate threads.
Documentation updated.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Add support for asymmetric operation EC Point Multiplication,
in crypto_octeontx PMD.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Balakrishna Bhamidipati <bbhamidipati@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Asymmetric crypto library is extended to add ECPM (Elliptic Curve Point
Multiplication). The required xform type and op parameters are
introduced.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Balakrishna Bhamidipati <bbhamidipati@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The rte_wait_until_equal_xx APIs abstract the functionality of
'polling for a memory location to become equal to a given value'.
Add the RTE_ARM_USE_WFE configuration entry for aarch64, disabled
by default. When it is enabled, the above APIs will call WFE instruction
to save CPU cycles and power.
From a VM, when calling this API on aarch64, it may trap in and out to
release vCPUs whereas cause high exit latency. Since kernel 4.18.20 an
adaptive trapping mechanism is introduced to balance the latency and
workload.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
When building the API docs, we can make the meson.build file easier to
read, and allow more code per line, by using subdir_done() to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Add proper support for calling sphinx whenever a file in the doc
directory changes. This is accomplished by using a wrapper script
for sphinx, which runs sphinx but also emits a gcc-format dependency
file listing all the doc files. This is used by ninja so that any
change to the doc files triggers a rebuild of the docs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
For building the guides, we can make the meson.build easier to read by
using the subdir_done function to quit early.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The install parameter to configure_file is new in 0.50 and generates a
warning since it is newer than our minimum version of 0.47.1. The
parameter, however, is unneeded as the documentation states:
"When omitted it defaults to true when install_dir is set and not empty,
false otherwise."
Given that install_dir is not set for this file, install defaults to false
so no need to explicitly specify it.
Fixes: 720b14db3ae2 ("build: generate API documentation with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
A new vDPA class was recently introduced.
IFC driver implements the vDPA operations,
hence it should be moved to the vDPA class.
Move it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add vDPA devices features table and explanation.
Any vDPA driver can add its own supported features by ading a new ini
file to the features directory in doc/guides/vdpadevs/features.
Signed-off-by: Matan Azrad <matan@mellanox.com>
The vDPA (vhost data path acceleration) drivers provide support for
the vDPA operations introduced by the rte_vhost library.
Any driver which provides the vDPA operations should be moved\added to
the vdpa class under drivers/vdpa/.
Create the general files for vDPA class in drivers and in documentation.
The management tree for vDPA drivers is
git://dpdk.org/next/dpdk-next-virtio.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
After upgrading to python-3.8.0, a syntax mismatch is revealed:
doc/guides/conf.py:240: SyntaxWarning: "is not" with a literal.
Did you mean "!="?
if value is not '':
Removing "is not ''" seems the right thing to do.
A patch may also be needed in the RTD theme package:
https://github.com/readthedocs/sphinx_rtd_theme/commit/a49a812c.diff
(not included in release 0.4.3)
Fixes: 9db3f52126fb ("doc: generate NIC overview table from ini files")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Meson fails to find a pkg-config executable if pkgconfig
isn't set for aarch64. The environment variable `PKG_CONFIG_PATH`
is useless in this case, and meson fails to locate dependencies
that are built in non-standard paths.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Update the cross build tool version to gcc8.3.
Fixes: 01add9da25cd ("doc: add cross compiling guide")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Previous versions of numactl may produce the following error
on some systems (at least on Fedora 30 and RHEL7.4):
./.libs/libnuma.so: undefined reference to `minor'
./.libs/libnuma.so: undefined reference to `major'
collect2: error: ld returned 1 exit status
This was fixed in upstream commit:
25691a084a
The fix is available in v2.0.13.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
The output of running the helloworld example on FreeBSD was a little
out-of-date and can be shortened by using the latest version of DPDK.
Update appropriately.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
FreeBSD 10 is now EOL and all testing with DPDK takes place on BSD versions
11 and 12, so we can just remove the note. The BSD ports are supported on
all non-EOL versions of BSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since the meson instructions are the simpler of the two sets, and also the
ones most future-proof, put those first in the user documentation with make
instructions following them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Add instructions on building DPDK and using the pkg-config file to the
linux GSG.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Update the system requirements section of the doc to cover builds with
meson and ninja. This involves updating the package dependencies to include
meson, ninja and python 3.5, and also updating the optional dependencies
section to explain that the components are enabled/disabled automatically
by meson.
As part of this update, the relevant sections were simplified to keep the
document shorter. For mandatory requirements, we can refer to the various
distro's development tools package groups rather than requiring gcc, core
tools etc. individually. The optional package list was very incomplete, and
if complete would duplicate information in the individual driver's guides.
Therefore we can simplify it by listing only the library optional
requirements and referring users to the driver docs to find details on
their dependencies.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Fix OFED and rdma-core versions for current offloads.
Add new offloads minimum versions.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
By default, both test-build.sh and test-meson-builds.sh scripts create the
builds they generate in the current working directory, leading to a large
number of build directories being present when testing patches. This
patchset modifies both scripts to use a DPDK_BUILD_TEST_DIR environment
variable to control where the build outputs are put.
For example, doing:
export DPDK_BUILD_TEST_DIR=__builds
./devtools/test-meson-builds.sh && ./devtools/test-build.sh \
x86_64-native-linux-clang+shared i686-native-linux-gcc
gives a "__builds" directory with 14 meson and 2 make builds (with the
meson build count depending on compiler availability)
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The 'get_user_pages_remote()' API is updated in kernel 4.10.0 [1],
but the check added as > 4.9.0,
this logic is broken for kernels 4.9.x, because they justify
> 4.9.0 check but have the old API.
Fixing the check as >= 4.10.0
[1]
commit 5b56d49fc31d ("mm: add locked parameter to get_user_pages_remote()")
Fixes: d965af9e8ae1 ("kni: increase kernel version requirement for VA")
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Aligning the Wind River copyright notices to be consistent with the
other files which bare the Wind River copyright notice.
Fixes: 32113d352d3b ("doc: replace license text with SPDX tag in AVP guide")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Move cryptodev feature near other crypto features.
Group ethdev features together.
Sort drivers/net features with new PMDs first.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add some pointers to the releases notes on the changes to the abi policy,
the introduction of project-level ABI management and the deprecation of
library-level management.
Signed-off-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: John McNamara <john.mcnamara@intel.com>
Commit in fixes line sets the DV (Direct Verbs) flow engine as default.
Newer versions of DV flow engine use the DR (Direct Rules) features.
DR is supported from RDMA Core library version rdma-core-24.0.
This cause failure to start port when using older rdma-core version,
without DR support.
This patch selects DV flow engine if rdma-core version is v24.0 or
higher. Verbs flow engine is selected otherwise.
Fixes: cd4569d2bf3c ("net/mlx5: change default flow engine to DV")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The offload flag was added, but the deprecation notice was not removed.
Fixes: 5d308972954c ("ethdev: add mbuf RSS update as an offload")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The functionality is added, but the deprecation notice is not
removed.
Fixes: 5d4813acda2c ("ethdev: add packet type range function")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- Add note for sharing an adapter between DPDK and Linux drivers.
- Update the firmware version in example.
- Add Config note for potential error due to lack of memzone descriptor
count.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Update release doc briefly describing updates to bnxt PMD for
19.11 release.
The support for these was added in the following commits:
1) b150a7e7ee66 ("net/bnxt: support LRO on Thor adapters")
2) be14720def9c ("net/bnxt: support FW reset")
3) df6cd7c1f73a ("net/bnxt: handle reset notify async event from FW")
4) 698aa7e95325 ("net/bnxt: add code to determine the Tx COS queue")
5) 04102f2ffc8c ("net/bnxt: update HWRM API to version 1.10.1.6")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
