Add all supported device id.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Rename all register macro to align with kernel driver's implementation.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Rename iavf_status_code to iavf_status to align with kernel
driver's implementation.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Delete iavf_hmc.h and iavf_lan_hmc.h since its not necessary.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Ixgbe PMD PF host code needs to support ixgbevf MAC address
add and remove. For this purpose, a response was added
between PF and VF to update the MAC address.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Current implementation is that only one Rx queue can support interrupt,
because all queues are mapped in the same vector id in
vfio_enable_msix(). So VF can not support multi-queue Rx interrupt in
the interrupt mode.
In this patch, if the packet I/O interrupt on datapath is enabled
(rte_intr_dp_is_en(intr_handle) is true), we map different interrupt
vectors to each queue and send this map to PF. After PF sets the map to
the register, all Rx queue interrupts will be received.
In addition, vector id should less than the maximum vector value. When
queue number is more than vector value, we set up a loop of interrupt
vectors map.
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On validation of GENEVE item, the wrong flag is used.
This patch sets the correct bit in item_flags bitmap.
Fixes: e59a5dbcfd07 ("net/mlx5: add flow match on GENEVE item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch implements the feature described in RFC [1], adding
support of RSS action on L3 and/or L4 source or destination only.
[1] http://mails.dpdk.org/archives/dev/2019-December/152796.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Rx hash fields were copied from input parameter into TIR attributes
directly, with no translation. As result the copied value was wrong.
This patch adds translation of value from input bitmap to the
appropriate format.
Fixes: dc9ceff73c99 ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Maximal size of coalesced LRO segment is set in TIR attributes as
number of chunks of size 256 bytes each.
Current implementation uses the hardcoded value 256 in several places.
This patch adds a definition for this value, and uses this definition
in all relevant places.
A debug message is added to clearly notify the actual configured size.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Bit-masks MLX5_FLOW_LAYER_IPV4_LRO and MLX5_FLOW_LAYER_IPV6_LRO were
added during work on LRO.
They are not used anywhere in current code.
This patch removes these redundant definitions.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The purpose of this patch is used to add a new field "fw_cap"
in bnxt structure. The new "fw_cap" field store all the capabilities
reported by the FW. This information will help us to determine
the device capabilities when registering feature support with FW.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix bnxt_free_filter() to ensure that the filter indices
are reset correctly when a filter is freed.
This change helps in avoiding few duplicate code as well.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove "__rte_unused" instances that are not required.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During the registration process, the drivers must publish
"HOT_RESET_SUPPORTED" capability to the core firmware only
if core firmware is capable of Hot Reset.
Fixes: df6cd7c1f73a ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Older Firmware could have state information such as
MAC Filters, VLAN settings etc configured by user.
But new Firmware is unaware of this state information
and as a result driver should restore these settings
during reset recovery.
This patch restores the user configured vlan settings
prior to hot FW upgrade or FW error.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Older Firmware could have state information such as
MAC Filters, VLAN settings etc configured by user.
But new Firmware is unaware of this state information
and as a result driver should restore these settings
during reset recovery.
This patch restores the user configured mac addresses
prior to hot FW upgrade or FW error.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The eth devices which share one ibv device only need one hash list of
flow table.
Currently, flow table hash list is created per each eth device
whatever whether they share one ibv device or not.
If the devices share one ibv device, the previously created hash list
will become dangle because the pointer point to (sh->flow_tbls) is
overwritten by the later created hast list.
To fix this, just don't create hash list if it is already created.
Fixes: 54534725d2f3 ("net/mlx5: fix flow table hash list conversion")
Cc: stable@dpdk.org
Reported-by: Zhike Wang <wangzhike@jd.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The type of txq has been assigned in mlx5_txq_hairpin_new.
Fixes: ae18a1ae9692 ("net/mlx5: support Tx hairpin queues")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Ori Kam <orika@mellanox.com>
If configuring the number of tx/rx queue with rte_eth_dev_configure
to nr_queues + hairpin_nr_queues, and setting tx/rx queues to
nr_queues with rte_eth_tx/rx_queue_setup. But not configuring the
hairpin queues via rte_eth_tx/rx_hairpin_queue_setup.
When starting the netdev, there is a crash because of NULL accessing.
Fixes: cf5516696d77 ("ethdev: add hairpin queue")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Ori Kam <orika@mellanox.com>
During a kernel PF reset, this event is propagated to the VF.
The DPDK VF PMD will execute the reset task before the PF is done
with his. This results in the admin queue message not being responded
to leaving the port in "promiscuous" mode.
This patch makes sure the promiscuous mode is configured independently
of the current admin state.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Xiao Zhang <xiao.zhang@intel.com>
In FreeBSD environment, nic_uio drivers do not support interrupts,
rte_intr_callback_register() will fail to register interrupts.
We cannot make link status to change from down to up by interrupt
callback. So we need to wait for the controller to acquire link
when ports start. Through multiple tests, 5s should be enough.
Fixes: b9bd0f09fa15 ("ethdev: fix link status query")
Cc: stable@dpdk.org
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The link status for ixgbevf is not correct when PF link up.
IXGBE_ESDP register is only used when media type is fiber.
Fixes: 1ca05831b9be ("net/ixgbe: fix link status")
Cc: stable@dpdk.org
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
FreeBSD OS doesn't support igb_uio interrupt, so it will fail when
unregister the interrupt callback in port close. We can fix the issue by
passing -ENOENT when check the return value of unregister interrupt
callback function.
Fixes: ac89d46096d5 ("net/i40e: release port upon close")
Cc: stable@dpdk.org
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Rx total stats is the total number of successfully received packets,
so exclude the number of rx_discards for Rx total stats.
Fixes: f4a41a6953af ("net/avf: support stats")
Cc: stable@dpdk.org
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The ipn3ke driver and the ifpga driver had circular dependencies on each
other, meaning that neither could be built with meson. Fix this by:
* setting the build order of net and raw to match that in makefiles
* removing the dependency from the net driver on the rawdev one
* fixing the dependency names in the rawdev driver meson.build file
Fixes: 8418c92811b4 ("net/ipn3ke: remove configuration for i40e port bonding")
Fixes: e1defba4cf66 ("raw/ifpga/base: support device tree")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
According to comms package, index 94 should be MAC_IPV6_ICMP,
not MAC_IPV4_ICMP. This patch fixes the issue.
Fixes: 4cf29798b4c9 ("net/ice: fix packet type table")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
In order to change RSS parameters, the host requires that RSS
is disable first.
Fixes: 92d23a57cafe ("net/netvsc: support configuring RSS parameters")
Cc: stable@dpdk.org
Signed-off-by: Donald Lee <donald_lee@trendmicro.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Abhishek Marathe <abmarath@microsoft.com>
The change to add OFFLOAD_RSS_HASH broke use of netvsc PMD
with testpmd. The netvsc driver fails during configure step:
Configuring Port 1 (socket 0)
hn_dev_configure(): unsupported RX offload: 0x80000
Fixes: 5d308972954c ("ethdev: add mbuf RSS update as an offload")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The VLAN field in the descriptor is not filled when ol_flags has
no VLAN flag. When the caller sends some packets with VLAN tags,
but other packets do not have VLAN tags, the behavior of the program
cannot be determined.
Fixes: 4b61d3bfa941 ("fm10k: add receive and tranmit")
Cc: stable@dpdk.org
Signed-off-by: Lu Qiuwen <luqiuwen@iie.ac.cn>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Previously large packet would be dropped, instead now it is better to
keep it via truncating it.
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Reviewed-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
BNXT_GET_DEFAULT_VNIC macro returns the default VNIC of the
function and fixed all occurrences of code to use the macro.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Remove an unnecessary log while deleting EM filters.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Use switch-case statement to replace if-else statement.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Use the new API to wait in low power state instead of continuous
polling to save CPU cycles and power.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
A new vDPA class was recently introduced.
IFC driver implements the vDPA operations,
hence it should be moved to the vDPA class.
Move it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This rewrites the MKSTR macro appending an empty string to its arguments
to resolve build failures similar to:
drivers/net/mlx4/mlx4.c:461:14: fatal error: format string is not a
string literal [-Wformat-nonliteral]
MKSTR(path, "%s/device/uevent", device->ibdev_path);
drivers/net/mlx4/mlx4_utils.h:82:30: note: expanded from macro 'MKSTR'
char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
drivers/net/mlx5/mlx5_stats.c:144:15: fatal error: format string is not a
string literal [-Wformat-nonliteral]
MKSTR(path, "%s/ports/%d/hw_counters/%s",
drivers/net/mlx5/mlx5_utils.h:149:30: note: expanded from macro 'MKSTR'
char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
The errors reproduce with clang version 9.0.0, and the release notes
don't mention what could have caused them.
Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
Fixes: 771fa900b73a ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
The legacy multi-packet write is the feature allowing to
put multiple packets into one transmitting descriptor,
this feature is supported by only NIC ConnectX-4LX.
The number of packets should be limited to provide
optimal size descriptor and better performance.
Fixes: 18a1c20044c0 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The legacy multi-packet write is the feature allowing to
put multiple packets into one transmitting descriptor,
this feature is supported by only NIC ConnectX-4LX.
The number of packets should be limited to provide
optimal size descriptor and better performance.
Fixes: 18a1c20044c0 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In extensive metadata mode the MARK copy table is engaged,
if the application creates the flow with zero MARK ID action:
flow create 1 ingress pattern eth / ... / end actions mark id 0 / .. end
And then destroys that, the traffic to the port stops. This happens
due to default flow for the copy table has the zero ID and is removed
with the application rule. The patch extends internal ID variable
to 64 bits and provide the UINT64_MAX ID for the copy table default
rule.
Fixes: dd3c774f6ffb ("net/mlx5: add metadata register copy table")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
When set the GRE item, GRE key should follow after GRE header, or the
header gre_item pointer used by the key will be invalid.
Currently in the mlx5_flow_validate_item_gre_key() function, the header
gre_item pointer is access before checking if the key is after the
header or not. Once the key item is before the header, invalid gre_item
pointer access happens.
Move the gre_item pointer access after the GRE header check to avoid the
crash issue.
Fixes: a7a0365565a4 ("net/mlx5: match GRE key and present bits")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
GENEVE is available in tunnel offloads. Add it as the default support
option.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The header mlx5_glue.h includes rte_byteorder.h, which isn't
pulled by global_inc. This patch adds the missing include directory
and fixes the build error:
In file included from drivers/net/mlx5/mlx5_glue.c:31:
drivers/net/mlx5/mlx5_glue.h:12:10: fatal error:
rte_byteorder.h: No such file or directory
The build failure can be triggered with:
meson -Dibverbs_link=dlopen build && ninja -C build
Fixes: 400d985eb586 ("net/mlx5: add VLAN push/pop DR commands to glue")
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
ConnectX-4LX supports multiple packets within the single Tx
descriptor. This feature is named as "Legacy Multi-Packet Write"
and imposes a lot of limitations:
- no ACLs, it means no NIC Tx Flows are supported and Tx metadata
become meaningless
- the required minimal inline data must be zero
- no SR-IOV, it means no support in E-Switch configurations,
- no priority and dscp forcing
- no VLAN insertion
- no TSO
- all packets within MPW session must have the same size
This legacy MPW feature is mainly intended for test purposes.
To explicitly engage the feature on ConnectX-4LX the devargs
should be specified:
- txq_mpw_en=1
This feature was dropped in 19.08, this patch reverts it back.
Fixes: 18a1c20044c0 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
