The function rte_eal_cleanup() was introduced more than one year ago,
in DPDK 18.02. It is no longer experimental, allowing
pdump, proc-info and hotplug_mp apps to not need any experimental API.
The function rte_ctrl_thread_create() was introduced one year ago
in DPDK 18.05. It is no longer experimental, allowing
KNI PMD and TEP example to not need any experimental API.
The functions rte_socket_count() and rte_socket_id_by_idx() were
introduced one year ago in DPDK 18.05. They are no longer experimental.
The function rte_dev_is_probed() was introduced half a year ago
in DPDK 18.11. It is no longer experimental.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
- mbuf_size and mtu are now being calculated according
to the given mb-pool.
- max_mtu is now being set according to the given mtu
the above two changes provide the ability to work with jumbo frames
Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with rte_eth_dev_release_port_secondary()
is the shared lock used in rte_eth_dev_release_port().
The function rte_eth_dev_release_port_secondary() was recently
added in 18.11 cycle.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Attach port from secondary should ignore devargs since the private
device is not necessary to support. Also previously, detach port on
a secondary process will mess primary process and cause the same
device can't be attached back again. A secondary process should use
rte_eth_dev_release_port_secondary to release a port.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Calling rte_eth_dev_info_get() on secondary process cause a crash
because eth_dev->device is not set properly.
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
The configuration value indicating that KNI was build was incorrect,
causing the driver to never be built.
Fixes: 3479586fe6 ("net/kni: add to meson build")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the kni library is an optional library, we need to add a check
here to ensure that the kni wrapper PMD is only built when the main kni
lib is being built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init
This new function is almost empty for now.
It will be used later to add some post-initialization processing.
For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.
Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
These drivers never attempt link speed negotiation. Change link_autoneg
value to ETH_LINK_FIXED to be more accurate and consistent between PMDs.
Fixes: 1e3a958f40 ("ethdev: fix link autonegotiation value")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
To avoid code duplication, add a parameter to rte_ctrl_thread_create()
to specify the name of the thread.
This requires to add a wrapper for the thread start routine in
rte_thread_init(), which will first wait that the thread is configured.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Many parts of dpdk use their own management threads. Introduce a new
wrapper for thread creation that will be extended in next commits to set
the name and affinity.
To be consistent with other DPDK APIs, the return value is negative in
case of error, which was not the case for pthread_create().
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
dpdk-procinfo, as a secondary process, cannot fetch stats for vdev.
This patch enables that by attaching the port from the shared data.
We also fill the eth dev ops, with only some ops works in secondary
process, for example, stats_get().
Note that, we still cannot Rx/Tx packets on the ports which do not
support multi-process.
Reported-by: Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
We introduced private rte_eth_dev_data to allow vdev to be created
both in primary process and secondary process(es). This is not
friendly to multi-process model, for example, it leads to port id
contention issue if two processes both find the data entry is free.
And to get stats of primary vdev in secondary, we must allocate
from the pre-defined array so that we can find it.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
There are 3 kind of link data in ethdev:
- capabilities (rte_eth_dev_info)
- configuration (rte_eth_conf)
- status (rte_eth_link)
A bit-field is used for capabilities (rte_eth_dev_info.speed_capa) and
configuration (rte_eth_conf.link_speeds).
Bits are defined in ETH_LINK_SPEED_*.
Some numerical (ETH_SPEED_NUM_*) and boolean (ETH_LINK_*) values
are used for the link status (rte_eth_link.*).
There was a mistake in the comment of rte_eth_link.link_autoneg,
suggesting ETH_LINK_SPEED_[AUTONEG/FIXED] which are 0/1,
instead of ETH_LINK_[AUTONEG/FIXED] which are 1/0.
The drivers are fixed to use ETH_LINK_[AUTONEG/FIXED].
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
This patch removes the forward declaration of eth_kni_drv
in rte_eth_kni.c; this forward declaration was made unnecessary
by commit 050fe6e9ff
("drivers/net: use ethdev allocation helper for vdev"), which
removes the usage of eth_kni_drv in the eth_kni_create() method.
Fixes: 050fe6e9ff ("drivers/net: use ethdev allocation helper for vdev")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Device name resides in two different locations, in rte_device->name and
in ethernet device private data.
For now, the copy in the ethernet device private data is required for
multi process support, the name is the how secondary process finds about
primary process device.
But for drivers there is no reason to use the copy in the ethernet
device private data.
This patch updates PMDs to use only rte_device->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This is a preparation to embed the generic rte_device into the rte_eth_dev
also for virtual devices.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Add KNI PMD which wraps librte_kni for ease of use.
KNI PMD can be used as any regular PMD to send / receive packets to the
Linux networking stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Yong Wang <yongwang@vmware.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Wang <yongwang@vmware.com>
