Add option to configure unique mempool for each ethernet device
port. The new option available with `pipeline_atq` and
`pipeline_queue` tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The script dependencies list was incomplete,
this patch adds missing modules and removes an unnecessary entry.
The installation command was also added.
Fixes: f400e0b82b ("app/crypto-perf: add script to graph perf results")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add event vector support in pipeline tests. By default this mode
is disabled, it can be enabled by using the option --enable_vector.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --enable_vector
Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector_size and
--vector_tmo_ns
This patch also adds a new option to set the number of Rx queues
configured per event eth rx adapter.
example:
dpdk-test-eventdev -l 7-23 -s 0xff00 -- --prod_type_ethdev
--nb_pkts=0 --verbose 2 --test=pipeline_atq --stlist=a
--wlcores=20-23 --nb_eth_queues 4
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Current support for unique data is to compile with config.h
var FIXED_VALUES as 0, and this is only supported on
compilation time, as a result the user may use only single
mode for each compilation.
Starting with this commit the user will have the ability to
use this feature on the fly by using this new option:
--unique-data
Example of unique data usage:
Insert many rules with different encap data for a flows that
have encap action in it.
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
The guide for using the crypto perf graphing script had some incorrect
indentation, unnecessary blank lines, and a missing argument in one of
the usage examples. These are corrected in this patch.
Fixes: f400e0b82b ("app/crypto-perf: add script to graph perf results")
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
The python script introduced in this patch runs the crypto performance
test application for various test cases, and graphs the results.
Test cases are defined in config JSON files, this is where parameters
are specified for each test. Currently there are various test cases for
devices crypto_qat, crypto_aesni_mb and crypto_gcm. Tests for the
ptest types Throughput and Latency are supported for each.
The results of each test case are graphed and saved in PDFs (one PDF for
each test suite graph type, with all test cases).
The graphs output include various grouped barcharts for throughput
tests, and histogram and boxplot graphs are used for latency tests.
Documentation is added to outline the configuration and usage for the
script.
Usage:
A JSON config file must be specified when running the script,
"./dpdk-graph-crypto-perf <config_file>"
The script uses the installed app by default (from ninja install).
Alternatively we can pass path to app by
"-f <rel_path>/<build_dir>/app/dpdk-test-crypto-perf"
All device test suites are run by default.
Alternatively we can specify by adding arguments,
"-t latency" - to run latency test suite only
"-t throughput latency"
- to run both throughput and latency test suites
A directory can be specified for all output files,
or the script directory is used by default.
"-o <output_dir>"
To see the output from the dpdk-test-crypto-perf app,
use the verbose option "-v".
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Currently, test-flow-perf app cannot generate flows with meter action.
This patch introduces new parameter "--meter" to generate flows
with meter action.
Signed-off-by: Dong Zhou <dongzhou@nvidia.com>
Reviewed-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Up to this commit the regex application was running with multiple QPs on
a single core. This commit adds the option to specify a number of cores
on which multiple QPs will run.
A new parameter 'nb_lcores' was added to configure the number of cores:
--nb_lcores <num of cores>.
If not configured the number of cores is set to 1 by default. On
application startup a few initial steps occur by the main core: the
number of QPs and cores are parsed. The QPs are distributed as evenly
as possible on the cores. The regex device and all QPs are initialized.
The data file is read and saved in a buffer. Then for each core the
application calls rte_eal_remote_launch() with the worker routine
(run_regex) as its parameter.
Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
One of the ways to increase the insertion/deletion rate is to use
multi-threaded insertion/deletion. Thus it's needed to have support
for testing and measure those rates using flow-perf application.
Now we generate cores and distribute all flows to those cores,
and start inserting/deleting in parallel.
The app now receive the cores count to use from command line option,
then it distribute the rte_flow rules evenly between the cores, and
start inserting/deleting. Each worker will report it's own results,
and in the end the MAIN worker will report the total results for all
cores.
The total results are calculated using RULES_COUNT divided over
max time used between all cores.
Also this touches the memory area, since inserting using multiple cores
in same time the pre solution for memory is not valid, thus now we save
memory before and after each allocation for all cores. In the end we
pick the min pre memory and the max post memory from all cores.
The difference between those values represent the total memory consumed
by the total rte_flow rules from all cores, and then report the total
size of single rte_flow in byte for each port.
How to use this feature:
--cores=N
Where 1 =< N <= RTE_MAX_LCORE
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Reviewed-by: Suanming Mou <suanmingm@nvidia.com>
We should be encouraging the use of vfio-pci for developers, not telling
them to use igb_uio.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is an improved version of the setup of huge pages
bases on earlier DPDK setup.
Differences are:
* autodetects NUMA vs non NUMA
* allows setting different page sizes
recent kernels support multiple sizes.
* accepts a parameter in bytes (not pages).
* can display current hugepage settings.
Most users will just use --setup argument but if necessary
the steps of clearing old settings and mounting/umounting
can be done individually.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Currently, flow-perf measures the performance of
rule installation/deletion operations by breaking
down the entire number of operations into windows
of fixed size (i.e., 100000 operations per window).
Then, flow-perf measures the total time per window
and computes an average time across all windows.
This commit allows flow-perf users to configure
the number of rules per window instead of using
a fixed pre-compiled value. To do so, users must
pass --rules-batch=N, where N is the number of
rules per window (or batch).
For consistency reasons, flow_count variable is
now renamed to rules_count. This variable is the
total number of rules to be installed/deleted.
For example, if a user wants to measure how much
time it takes to install 1M rules in a certain NIC,
he/she can input:
--rules-count=1000000
This way flow-perf will break down 1M flow rules into
10 batches of 100k flow rules each (this is the default
batch size) and compute an average across the 10
measurements.
Now, if the user modifies the number of rules per
batch as follows:
--rules-count=1000000 --rules-batch=500000
then flow-perf will break down 1M flow rules into
2 batches of 500k flow rules each and compute the
average across the 2 measurements.
Finally, this commit also adds default variables
to the usage function instead of hardcoded values.
Signed-off-by: Georgios Katsikas <katsikas.gp@gmail.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Python 2 support has now been dropped. Remove references to it in the
documentation.
Since all python scripts now have a proper shebang that calls python3,
execute the scripts directly without specifying the interpreter.
Sphinx version from most Linux distros is OK in 2020, do not encourage
people to break their system by installing with pip. Use the distros
official packages.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
Start support matching on icmpv4 and icmpv6.
Usage:
--icmpv4: add icmp item to match on.
--icmpv6: add icmpv6 item to match on.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Sometimes you need to check flow performance for
certain port and not all ports. Thus a portmask
option is needed.
Usage:
--portmask=N
Where N represent the hexadecimal bitmask of ports
used.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce raw-encap and raw-decap actions.
The two actions are added in command line
options, and for the data to encap or decap
the user need to parse it within the command
line.
All values of raw-encap data is set to be fixed
values.
Usage example:
--raw-encap=ether,ipv4,udp,vxlan
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce flag action support to flow perf
application.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce headers modify actions in the app.
All header modify actions will add different value
for each flow, to make sure each flow will create
and use it's own actions.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
The old design was using the bit mask to identify
items, action and attributes.
So it was all based on the order of the code itself,
to place the order of the actions, items & attributes
inside the flows. Such design will lead into many failures
when some PMD support order different than other PMD,
in the end the rules will fail to create. Also sometimes
the user needs to have one action before other actions
and vice versa, so using new design of arrays that
take user order into consideration make more sense.
After this patch, we start supporting inner items
and more than one instance of same action.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Currently all the sections are considered as main title under
DPDK Tools User Guides.
This fix will collect all flow perf sections under one title
which is Flow Performance Tool
Fixes: 3344cf2e30 ("app/flow-perf: add flow performance skeleton")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Following the new RegEx class.
There is a need to create a dedicated test application in order to
validate this class and PMD.
Unlike net device this application loads data from a file.
This commit introduces the new RegEx test app.
The basic app flow:
1. Configure the RegEx device to use one queue, and set the rule
database, using precompiled file.
2. Allocate mbufs based on the requested number of jobs, each job will
i get one mbuf.
3. Enqueue as much as possible jobs.
4. Dequeue jobs.
5. if the number of dequeue jobs < requested number of jobs job to step
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
fixed typing error in doc/guides/tools/testbbdev.rst
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Add a new option for PDCP cases to enable use of session
based fixed HFN value instead of per packet HFN which was
enabled by hfn override feature.
By default HFN override is enabled and if session based
fixed HFN need to be tested, add "--pdcp-ses-hfn-en" in the
command line.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Introduce packet forwarding support to the app to do
some performance measurements.
The measurements are reported in term of packet per
second unit. The forwarding will start after the end
of insertion/deletion operations.
The support has single and multi performance measurements.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Introduce new feature to dump memory statistics of each socket
and a total for all before and after the creation.
This will give two main advantage:
1- Check the memory consumption for large number of flows
"insertion rate scenario alone"
2- Check that no memory leackage after doing insertion then
deletion.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add the ability to test deletion rate for flow performance
application.
This feature is disabled by default, and can be enabled by
add "--deletion-rate" in the application command line options.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Add insertion rate calculation feature into flow
performance application.
The application now provide the ability to test
insertion rate of specific rte_flow rule, by
stressing it to the NIC, and calculate the
insertion rate.
The application offers some options in the command
line, to configure which rule to apply.
After that the application will start producing
rules with same pattern but increasing the outer IP
source address by 1 each time, thus it will give
different flow each time, and all other items will
have open masks.
The current design have single core insertion rate.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Xiaoyu Min <jackmin@mellanox.com>
Modification to vectors parameters used for unit test
for coverage and performance test of bbdev drivers
across all devices.
Updating and reducing list for focused coverage on relevant
code blocks for 4G and 5G. Less focus on 4G TB mode as there is
some question how to best support this with mbuf limitations and
if effect are not used.
Removing scenarios with negative LLR assumptions which are not
used with any PMDs and historical only.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Includes support for BLER (Block Error Rate) wireless
performance test with new arguments for SNR and number
of iterations for 5G. This generates LLRs for a given
SNR level then measures the ratio of code blocks being
successfully decoded or not.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit adds release notes and updates documentation for
the cycle-count mode added to the compression performance tool.
Fixes: 2695db95a1 ("test/compress: add cycle-count mode to perf tool")
Signed-off-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Shoot repeated words in all our guides.
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Using external explicit references to http://doc.dpdk.org makes older
releases documentation point to the current master documentation pages.
Switch to internal references.
Fixes: 59ad25fe21 ("doc: add overview of qat guide")
Fixes: 30e7fbd628 ("doc: add event timer adapter guide")
Fixes: b7f859c9a9 ("doc: add switch representation documentation")
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Add options to set mbuf size and max packet size which allow the user to
enable jumbo frames and Rx/Tx scatter gather.
Arrange `struct evt_options` based on ascending order of data type to
make it more readable.
Packet mbuf size can be modified by using `--mbuf_sz=N`.
Max packet size can be modified by using `--max_pkt_sz=N`.
These options are only applicable `pipeline_atq` and `pipeline_queue`
tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds --ptest option to make possible to choose
test case from command line.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
The pdump tool works as the secondary process. When the primary process
exits and the residual secondary process keeps running, it will make the
primary process can't start up again. Since the ex-fbarry files are still
attached by the secondary process pdump, the 'new' primary process can't
get these files locked.
The patch is to set up an alarm which runs every 0.5s periodically
to monitor the primary process in the pdump. Once the primary exits,
so will the pdump.
Signed-off-by: Suanming Mou <mousuanming@huawei.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The section "Test Vector files" should not be at the same level as
the main title "dpdk-test-bbdev Application".
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add option --multi, to enhance pdump application to allow capture
on unique cores for each --pdump option. If option --multi is ignored
the default capture occurs on single core for all --pdump options.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Add option to provide a global dequeue timeout that is used to create
the eventdev.
The dequeue timeout provided will be common across all the worker
ports. If the eventdev hardware supports power management through
dequeue timeout then this option can be used for verifying power
demands at various packet rates.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
