The enic PMD code has diverged from code that was once
shared with the enic kernel mode driver for performance
reasons. It is confusing and misleading to print the
internal version number. Remove it.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
The enic PMD was using the same variables in the enic structure to
track two different things. Initially rq_count, wq_count, cq_count,
and intr_count were set to the values obtained from the VIC adapters
as the maximum resources allocated on the VIC, then in
enic_set_vnic_res(), they were set to the counts of resources actually
used, discarding the initial values. The checks in enic_set_vnic_res()
were technically incorrect if it is called more than once on a port,
which happens when using bonding, but were harmless in practice as the
checks couldn't fail on the second call.
The enic rx-scatter patch misunderstood the subtleties of
enic_set_vnic_res(), and naively added a multiply by two to the
rq_count check. This resulted in the rq_count check failing when
enic_set_vnic_res() was called a second time, ie when using bonding.
This patch adds new variables to the enic structure to track the
maximum resources the VIC is configured to provide so that the
information isn't later lost and calls to enic_set_vnic_res() do
the expected thing.
Fixes: 856d7ba7ed ("net/enic: support scattered Rx")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
The macro ENIC_ASSERT does the same thing as RTE_ASSERT,
thus it can be removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John Daley <johndale@cisco.com>
The Rx scatter patch failed to make a few changes and resulted in
problems when using multiple receive queues (RQs) in DPDK (ie RSS)
since the wrong adapter resources were being used.
- get and use the correct completion queue index associated with a
receive queue.
- set the correct receive queue index when using RSS
Fixes: 856d7ba7ed ("net/enic: support scattered Rx")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Provide an update MTU callback. The function returns -ENOTSUP
if Rx scatter is enabled. Updating the MTU to be greater than
the value configured via the Cisco CIMC/UCSM management interface
is allowed provided it is still less than the maximum egress packet
size allowed by the NIC minus the size of the L2 header.
Signed-off-by: John Daley <johndale@cisco.com>
Pull in common VNIC code which enables querying for max egress
packet size with newer firmware via a device command. If the
field is non-zero, it is the max egress packet size. If it is
0, the default value (9022) can safely be assumed. The value
for 1300 series VICS using firmware versions >= 3.1.2 for blade
series and >= 2.0.13 for rack series servers is 9208.
Tx buffers can be emitted only if they are less than the max egress
packet size regardless of the MTU setting (the MTU is advisory).
The max egress packet size can used to determine the upper limit
of the MTU since the enic can also receive packets of size greater
than max egress packet size. A max_mtu variable is added with
a value of max egress packet size minus L2 header size.
The default MTU is set via the CIMC/UCSM management interface and
currently allows value up to 9000. If the value is changed, the
host must be reboot. To avoid the reboot and allow MTU values
up to the max capability of the NIC, MTU update capability will
be added with a max value capped by max_mtu.
Signed-off-by: John Daley <johndale@cisco.com>
enic_alloc_consistent() allocated memory, but enic_free_consistent()
was an empty function, so allocated memory was never freed.
This commit adds a list and lock to the enic structure to keep track
of the memzones allocated in enic_alloc_consistent(), and
enic_free_consistent() uses that information to properly free memory.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
For performance reasons, this patch uses 2 VIC RQs per RQ presented to
DPDK.
The VIC requires that each descriptor be marked as either a start of
packet (SOP) descriptor or a non-SOP descriptor. A one RQ solution
requires skipping descriptors when receiving small packets and results
in bad performance when receiving many small packets.
The 2 RQ solution makes use of the VIC feature that allows a receive
on primary queue to 'spill over' into another queue if the receive is
too large to fit in the buffer assigned to the descriptor on the
primary queue. This means that there is no skipping of descriptors
when receiving small packets and results in much better performance.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Private/conflicting ol_flags where used to enable UDP/TCP Tx
offloads. Use the common flags in PKT_TX_L4_MASK to support them.
When updating flags, also do some minor code rearranging for
slightly better performane.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
Add an ASSERT macro for the enic driver which is enabled when the log
level is >= RTE_LOG_DEBUG. Assert that number of mbufs to return to
the pool in the Tx function is never greater than the max allowed.
Signed-off-by: John Daley <johndale@cisco.com>
The list of mbufs held by the driver on Tx was allocated in chunks
(a hold-over from the enic kernel mode driver). The structure used
next pointers across chunks which led to cache misses.
Allocate the array used to hold mbufs in flight on Tx with
rte_zmalloc_socket(). Remove unnecessary fields from the structure
and use head and tail pointers instead of next pointers.
Signed-off-by: John Daley <johndale@cisco.com>
Functions existed which were never called. Removed them. Also
rename the 'pmd' from the name of the Tx function to improve clarity.
Signed-off-by: John Daley <johndale@cisco.com>
The Tx functions were in enic_ethdev.c and enic_main.c - files in which
they did not logically belong. To make things consistent with most
other drivers, we therefore extract them and place them with the equivalent
Rx functions into a file called enic_rxtx.c.
Signed-off-by: John Daley <johndale@cisco.com>
Truncated packets occur on enic if an mbuf is not big enough to
receive it or there aren't enough mbufs if rx scatter is in use.
They show up as error packets but unlike other error packets (like
packets bad FCS) there are no nic drop counts incremented for them.
Truncated packets are calculated by subtracting hardware errors from
software errors. Note: this causes transient inaccuracies in the
ipackets count. Also, the length of truncated packets are counted
in ibytes even though truncated packets are dropped which can make
ibytes be slightly higher than it should be.
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
rx_no_bufs is a hardware counter of packets dropped on the
interface due to no host buffers and should be used to update
r_stats->imissed counter instead of rx_nombuf.
Include rx_drop in ierrors. rx_drop is incremented if packets
arrive when the receive queue is disabled.
Add a structure and functions for initializing and clearing
software counters. Add count of Rx mbuf allocation failures
(rx_nombuf) as the first counter.
Fixes: fefed3d1e6 ("enic: new driver")
Signed-off-by: John Daley <johndale@cisco.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This is a wholesale replacement of the Enic PMD receive path in order
to improve performance and code clarity. The changes are:
- Simplify and reduce code path length of receive function.
- Put most of the fast-path receive functions in one file.
- Reduce the number of posted_index updates (pay attention to
rx_free_thresh)
- Remove the unneeded container structure around the RQ mbuf ring
- Prefetch next Mbuf and descriptors while processing the current one
- Use a lookup table for converting CQ flags to mbuf flags.
Signed-off-by: John Daley <johndale@cisco.com>
For every packet sent, a completion was being requested and the
posted_index register on the nic was being updated. Instead, request a
completion and update the posted index once per burst after all
packets have been sent by the burst function.
Signed-off-by: John Daley <johndale@cisco.com>
Acked-by: Sujith Sankar <ssujith@cisco.com>
move enic PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: move vnic/ to base/]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
