DPAA requires the I/O shall be done in a HW portal context only.
The portal affinity is currently only being done in session create
and config APIs with the assumption that same thread will be used
for IO. This is causing issue.
This patch add support during I/O to check the HW portal affinity
and affine portal- if not affined already.
Fixes: 9a984458f755 ("crypto/dpaa_sec: rewrite Rx/Tx path")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
For out-of-place operations, comparing expected ciphertext with
the operation result should skip cipher_offset bytes, as those
will not be copied from source to the destination buffer, making
the tests fail.
Fixes: 02ed7b3871d6 ("test/crypto: add SNOW3G test cases for auth-cipher")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Recent patch to support UDP encapsulation introduced problem with
handling inbound IPv6 packets with header extensions.
This patch aims to fix the issue.
Bugzilla ID: 695
Fixes: 9a1cc8f1ed74 ("examples/ipsec-secgw: support UDP encapsulation")
Reported-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch enables the compression on QAT GEN3 (on hardware
versions that support it) and changes the error message shown
on older hardware versions that don't support the compression.
It also fixes the crash that happened on IM buffer allocation
failure (not enough memory) during the PMD cleaning phase.
Fixes: a124830a6f00 ("compress/qat: enable dynamic huffman encoding")
Fixes: 352332744c3a ("compress/qat: add dynamic SGL allocation")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch increases the intermediate buffer size used for the
compression on QAT GEN3 to accommodate new hardware versions.
Fixes: a124830a6f00 ("compress/qat: enable dynamic huffman encoding")
Cc: stable@dpdk.org
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The logging should show context by printing the two variables which
compared to each other. 'nb_harq_inputs', not 'nb_hard_outputs';
'nb_harq_outputs', not 'nb_hard_outputs'.
This patch corrected misused variable.
Fixes: d819c08327f3 ("app/bbdev: update for 5GNR")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Return value of a function 'rte_malloc' is dereferenced without
checking, and may result in segmentation fault.
This patch fixed it.
Fixes: 31a7853d1ed9 ("baseband/turbo_sw: support large size code block")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
VM channel number should not be validated against the
host vm_power_manager coremask core indexes, as VM
cores need not to be same as host cores.
So remove this check, to allow all the vm channels
to be added successfully.
Fixes: b49c677a0d24 ("examples/vm_power: respect core mask")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
This patch adds checking for service core index validity when parsing
service corelist.
Fixes: 7dbd7a6413ef ("service: add -S corelist option")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds checking for mp reply result in handle_sync().
Fixes: 07dcbfe0101f ("malloc: support multiprocess memory hotplug")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch adds checking for rte_zmalloc() result when init Intel ntb
device, also fix the same bug when start ntb device.
Fixes: 034c328eb025 ("raw/ntb: support Intel NTB")
Fixes: c39d1e082a4b ("raw/ntb: setup queues")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch adds checking spad user index validity when set or get attr.
Fixes: 277310027965 ("raw/ntb: introduce NTB raw device driver")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Move pkg-config override to beginning in the Makefile to allow
use PKGCONF variable to detect the libdpdk availability.
Fixes: fda34680eb9a ("examples: remove legacy sections of makefiles")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variable inc_dir is not defined in this file.
Fixes: 4cd1c5fd9ed4 ("regex/octeontx2: introduce REE driver")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Guy Kaneti <guyk@marvell.com>
Most of the checks on developer_mode have been accidentally dropped.
Restore them.
Fixes: 7d611e35b077 ("lib: simplify main build file")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
After creating a connection tracking context, it can be used between
two ports. For each port, the flow for one direction traffic will
be created.
The context can only be shared between the owner port and the peer
port that was specified when being created. Only the owner port
could update the context or query it in current implementation.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The item of ASO connection tracking will be translated into the
register value when matching. The validation of this item has no
dependency on other layers, since the flow including this item
should be jumped from another group. All the layers checking was
already done in the previous groups. Only the state bits conflict
should be checked.
It is assumed that the flow with CT item will always work on the
TCP traffic.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The validation of a CT action contains two parts. The first is the
CT action configurations parameter. When creating a CT action
context, some members need to be verified.
The second is that when creating a flow, the DR action of CT should
be validated with other actions and items as well. Currently, only
the TCP protocol support connection tracking.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When updating a connection tracking context, two separate parts
could be updated.
First, the direction. This will only update the traffic direction
recorded in the software for flow creation.
Second, the TCP parameters. The hardware context will be updated
via the WQE. This update will be blocked until the hardware status
is updated and ready for the next flow creation.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The return register of the DR action will be used for matching.
After the ASO CT checking of a TCP packet, the syndrome is filled in
the register. Only the 8 LSB should be used. A converting from
RTE_FLOW_CONNTRACK_FLAG* to the syndrome should be done after
checking the spec and mask fields.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When creating a flow with this action context for CT, it needs to be
translated in 2 levels.
First, retrieve from action context to rte_flow action.
Second, translate it to the corresponding DR action with traffic
direction that was specified when creating or updating via
rte_flow_action_handle* API.
Before using the DR action in a flow, the CT context should be
available to use in the hardware. A synchronization is done before
inserting the flow rule with CT action to check the HW availability
of this CT context.
In order to release the DR actions and reuse the context of a CT,
the reference count should also be handled in the flow rule
destroying.
The CT index will be recorded in the rte_flow by reusing the ASO age
index to save memory, since only one ASO action is supported in one
flow rule currently. The action context type should also be saved
for CT. When destroying a flow rule, if the context type is CT and
the index is valid (non-zero), the release process should be
handled. By default, the handling will fall back to try to release
the ASO age if any.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When trying to destroy an ASO connection tracking context, the DR
action created on this context should also be destroyed. Before
inserting the related software object into the management free list,
the reference count should be checked.
Right now, the context object will not be freed to the system and
will be reused directly from the free list.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
After the connection tracking context is created and being used by
the flows, the context will be updated by the HW automatically after
a packet passed the CT validation. E.g., the ACK, SEQ, window and
state of CT can be updated with both direction traffic.
In order to query the updated contents of this context, a WQE should
be posted to the SQ with a return buffer. The data will be filled
into the buffer. And the profile will be filled with specific value.
During the execution of query command, the context may be updated.
The result of the query command may not be the latest one.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When freeing the IB shared context during stopping a device, the
ASO connection tracking management structure should also be cleaned
up.
All the DR actions created should be destroyed. The structures need
to be freed and ASO CT QP should be released. In the meanwhile, the
allocated and registered memory region for query should also be
deregistered and then freed.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Allocating a CT from the management pools and creating the DR actions
for both directions by default.
If there is no available connection tracking action, a new pool will
be created with a fixed size bulk allocation. Right now, all the
resources are controlled by the linked list.
The ASO connection tracking context associated with these actions
need to be updated via WQE before using for steering.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
After the connection tracking object bulk is allocated, all the
objects' contents are filled with zero by default. Every
new-allocated object must be modified via WQE operation before it is
used.
In order to reduce the latency for the flow creation, an asynchronous
way is used instead of busy waiting for the CQE to be generated.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Adding support for connection tracking ASO creation via Devx command.
Right now only bulk creation is supported.
By default, the objects with zero contents will be created. Before
using a single object, the modification via posting a WQE to the ASO
CT SQ is needed.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The definitions of ASO connection tracking objects management
structures are added.
Considering performance, the bulk allocation of ASO CT objects
should be used. The maximal value per bulk and the granularity could
be fetched from HCA capabilities 2. Right now, a fixed number of 64
is used for each bulk for a better management purpose.
The ASO QP for CT is initialized, the SQ will be used for both
modify and query command.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Based on the capacity, 3 registers could be used. Due to the register
allocation, only the one REG_C_3 for meter color could be reused
right now.
Then in the same flow, no more than one ASO action can be supported.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
During startup, the ASO connection tracking offload capability could
be queried via HCA_CAP_QUERY command. If the HW doesn't support ASO
CT, the value would be 0 by default. The following initialization
should be skipped and the creation of the CT object should return
a failure directly.
The following CT creation should also check this capability. With
the old driver, the pre-processing macro should be used in order to
make the compiling pass.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The structures of ASO connection tracking offload object are added
based on the definitions in the PRM. One CT object context will be
loaded into the cache completely in a reversed order of dwords. The
valid bit should be the MSB of the last dword. This is used for the
conntrack context creation and update, as well as for the query.
The capabilities 2 (HCA_CAP_2) layout is also added. The connection
tracking related capabilities could be queried via the HCA_CAP_2.
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
From RFC the size of the TCP flags is 9, while the defined
current size is 6.
Fixes: 641dbe4fb053 ("net/mlx5: support modify field flow action")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@nvidia.com>
Reviewed-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Support the PMD power management API in MLX5 driver.
The monitor policy of this API puts a CPU core to sleep until
a data in some monitored memory address is changed by the NIC.
Implement the get_monitor_addr function to return an address
of a CQE owner bit to monitor the arrival of a new packet.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Due to kernel issue in direct MKEY creation using the DevX API for
physical memory, this patch replaces the ASO MR creation to use Verbs
API.
Fixes: f935ed4b645a ("net/mlx5: support flow hit action for aging")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Driver should prevent any DMA with the device when it
detects an error. When firmware is in fatal state,
stop tx/rx by assigning them to dummy functions.
Fixes: be14720def9c ("net/bnxt: support FW reset")
Fixes: 9d0cbaecc91a ("net/bnxt: support periodic FW health monitoring")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix ring count calculation for Thor. VNIC count does not have a
direct bearing on the number of rings that can be used.
Fixes: fe8dd26f86c7 ("net/bnxt: cap max Rx rings for Thor")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix comparison between uint16_t and uint32_t types.
Fixes: 6dc83230b43b ("net/bnxt: support port representor data path")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Return value where return value of rte_pci_read_config was not checked.
Fix it.
Coverity issue: 349919
Fixes: 9d0cbaecc91a ("net/bnxt: support periodic FW health monitoring")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
dev_info.max_mac_addrs is of type uint32_t. But the counter i is
of type uint16_t. This mismatch may cause the loop condition may
always be true. Change the loop counter variable to uint32_t.
Fixes: b02f1573cd07 ("net/bnxt: restore MAC filters during reset recovery")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
The check BNXT_SINGLE_PF(bp) returns false for a VF. So there is no
extra check needed for VF along with BNXT_SINGLE_PF(bp).
Also make error messages more explicit.
Fixes: ff947c6ce15f ("net/bnxt: add check for multi host PF per port")
Fixes: f86febfb46da ("net/bnxt: support VF")
Fixes: 3e12fdb78e82 ("net/bnxt: support VLAN pvid")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Ensure that the current count of in-use VNICs is decremented
when a VNIC is freed. Don't attempt VNIC allocation when the
maximum supported number of VNICs is currently allocated.
Fixes: 49d0709b257f ("net/bnxt: delete and flush L2 filters cleanly")
Fixes: d24610f7bfda ("net/bnxt: allow flow creation when RSS is enabled")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reported-by: Stephen Hemminger <sthemmin@microsoft.com>
Fix to clear the Rx FIFO while reading the timestamp.
If the Rx FIFO has pending bit set, keep reading to clear it
and return the last valid timestamp instead of unconditionally
returning an error.
Fixes: b11cceb83a34 ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Eliminate separate codepath/handling for single queue
as the multiqueue code path takes care of it as well.
The only difference being the end_grp_id being 1
now instead of 0 for single queue, but that does not matter
for single queue and does not alter any functionality.
Fixes: 6133f207970c ("net/bnxt: add Rx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the PF to set the location of the RX VLAN tag for stripping offloads.
So the VF needs to extract the VLAN tag according to the location flags.
This patch is the fix for AVX512 path, as AVX2 is already fixed.
Fixes: 9c9aa0040344 ("net/iavf: add offload path for Rx AVX512 flex descriptor")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Qin Sun <qinx.sun@intel.com>
New FDIR parsing are added to handle the fragmented IPv4/IPv6 packet.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
New pattern and RSS hash flow parsing are added to handle fragmented
IPv4/IPv6 packet.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for IP fragment RSS hash and FDIR function. Separate IP
fragment and IP other packet types.
The patch also update the release date in README.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
External topology devices (e.g. PHYs) connected to 100G or to SoC that
includes 100G IP might have a firmware engine within the device and
the firmware is usually loaded from NVM connected to the topology
device.
The topology device NVM images can be updated using SW tools but
such solution poses a security risk if there is no validation of
the integrity of an image before programming it to the device NVM.
In order to prevent security risk, the topology device NVM image might
be included as part of 100G NVM image. When the topology device
NVM image is present in the 100G NVM image, it is authenticated
and might be loaded to the topology device at startup or on command
of SW using dedicated AQ.
This patch provides support for this functionality.
Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The base code support to build configuration TLVs
in DSCP mode has not been implemented before, so
the functions to do so and the flow control to determine
if we are in VLAN or DSCP mode need to be added.
The current value for maximum number of DCB APPs
(ICE_DCBX_MAX_APPS) is not sufficient when supporting
DSCP mode. Each DSCP->TC mapping will come in as a
single APP value. So, there can be up to 64 APPs for
DSCP mapping.
Need to keep track of the current DSCP to TC mapping
so that TLVs can be built up to send to the FW. Add
an u8 array to hold this info.
A u64 is also needed to keep track of the DSCP values
that have had an APP submitted to map its value to a
TC. Since it would be unwise to allow an APP to be
overwritten by subsequent APPs, reject mappings for a
DSCP value that already has a user mapped value. This
will allow us to easily track which DSCP values have
been mapped, and when the last one has been deleted.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently if the driver supports QinQ there is no message/information
if the DDP and/or FW don't support QinQ. Add functionality that prints
if the DDP and/or FW don't support QinQ if the driver attempts to
configured DVM. This will make it more obvious to users in the field
that they need to update their DDP and/or FW.
This required a small refactor so some of the existing code could be
shared and used by this new print functionality.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
