As per an known HW issue RVUM interrupts may get dropped, If an RVUM
interrupt event occurs when PCCPF_XXX_MSIX_CAP_HDR[MSIXEN]=0 then no
interrupt is triggered, which is expected. But after MSIXEN is set to
1, subsequently if same interrupts event occurs again, still no
interrupt will be triggered.
As a workaround, all RVUM interrupt lines should be cleared between
MSIXEN=0 and MSIXEN=1.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Definition of `rte_ether_addr` structure used a workaround allowing DPDK
and Windows SDK headers to be used in the same file, because Windows SDK
defines `s_addr` as a macro. Rename `s_addr` to `src_addr` and `d_addr`
to `dst_addr` to avoid the conflict and remove the workaround.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2021-July/215270.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
This patch enables building the ixgbe driver for Windows.
It also enables its dependencies on security and cryptodev.
I tested on AWS using ixgbe VF device, using dpdk-testpmd.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
If some of the VA entries of table are somehow not populated and are
NULL, it can add offset to NULL and return the invalid VA in PA to
VA conversion.
In this patch, adding a check if the VA entry has valid address only
then add offset and return VA.
Fixes: 2f3d633aa5 ("common/dpaax: add library for PA/VA translation table")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There is no need for preventional check of rte_lcore_id() in
data path. This patch removes the same.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
RAW configure and Queue setup APIs support size parameter for
configure. This patch supports the same for DPAA2 QDMA PMD APIs
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds comment to explain how dpaa_port_fmc_ccnode_parse
function is working to get the HW queue from FMC policy file
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch updates the RSS support to support following additional
distributions:
- VLAN
- ESP
- AH
- PPPOE
Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
TX redirection support by flow action RTE_FLOW_ACTION_TYPE_PHY_PORT
and RTE_FLOW_ACTION_TYPE_PORT_ID
This action is executed by HW to forward packets between ports.
If the ingress packets match the rule, the packets are switched
without software involved and perf is improved as well.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Updating MC firmware support APIs to be latest. It supports
improved DPDMUX (SRIOV equivalent) for traffic split between
dpnis and additional PTP APIs.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Finding with "librt" keyword would give the output with
full path of librt such as
/usr/lib/gcc/x86_64-linux-gnu/7/../../../x86_64-linux-gnu/librt.so
instead of -lrt in libdpdk.pc pkg-config file.
Assume find_library() will prepend "lib", thus remove
"lib" from "librt" keyword. The output will shows
as -lrt.
This will cause an issue when compile DPDK app with
static library as the path of librt has been hard-coded
in the libdpdk.pc file.
Fixes: e41856b515 ("raw/ifpga/base: enhance driver reliability in multi-process")
Cc: stable@dpdk.org
Signed-off-by: Mohamad Noor Alim Hussin <mohamad.noor.alim.hussin@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The mlx5 PMD for regex class uses an MMO WQE operated by the GGA engine
in BF devices.
Currently, all the MMO WQEs are managed by the SQ object.
Starting from BF3, the queue of the MMO WQEs should be connected to the
GGA engine using a new configuration, MMO, that will be supported only
in the QP object.
The FW introduced new capabilities to define whether the MMO
configuration should be configured for the GGA queue.
Replace all the GGA queue objects to QP, set MMO configuration according
to the new FW capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The mlx5 PMD for compress class uses an MMO WQE operated by the GGA
engine in BF devices.
Currently, all the MMO WQEs are managed by the SQ object.
Starting from BF3, the queue of the MMO WQEs should be connected to the
GGA engine using a new configuration, MMO, that will be supported only
in the QP object.
The FW introduced new capabilities to define whether the MMO
configuration should be configured for the GGA queue.
Replace all the GGA queue objects to QP, set MMO configuration according
to the new FW capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
A new configuration MMO was added to QP Context.
If set, MMO WQEs are supported on this QP.
For DMA MMO, supported only when dma_mmo_qp==1.
For REGEXP MMO, supported only when regexp_mmo_qp==1.
For COMPRESS MMO, supported only when compress_mmo_qp==1.
For DECOMPRESS MMO, supported only when decompress_mmo_qp==1.
Add support to DevX interface to set MMO bit.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
New MMO HCA capabilities were added and others were renamed.
Align hca capabilities with new prm.
Add support in DevX interface for changes in HCA capabilities.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently drivers using QP (vDPA, crypto and compress, regex soon)
manage their memory, creation, modification and destruction of the QP,
in almost identical code.
Move QP memory management, creation and destruction to common.
Add common function to change QP state to RTS.
Add user_index attribute to QP creation.
It's for better code maintenance and reuse.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Caught running ASAN.
The device name was leaked on scan.
rte_device name field being a const, use a local pointer and release
in error path.
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Long Li <longli@microsoft.com>
Fixed with ./devtools/update-abi.sh $(cat ABI_VERSION)
Fixes: e73a7ab224 ("net/softnic: promote manage API")
Fixes: 8f532a34c4 ("fib: promote API to stable")
Fixes: 4aeb92396b ("rib: promote API to stable")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Code changes done for build issue as reported in Bug 817
error: dereferencing type-punned pointer will break strict-aliasing rules.
added union to avoid pointer dereferencing
The build issue has been reported with both gcc 4.8.5 (RHEL 7) and
gcc 5.4.0 (Ubuntu 16.04).
Bugzilla ID: 817
Fixes: 39925373a3 ("net/ice/base: add parser execution main loop")
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use bool type for function's switch parameter,
this could avoid passing "1" or "0" which is not reader friendly.
Signed-off-by: Jilei Chen <chenjilei@cmss.chinamobile.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
VFs are not allowed to change physical link params when a port
module change is detected. The firmware already returns appropriate
permission error when VF tries to change physical link params. But,
make sure to avoid sending the command to firmware from VF in the
first place and prevent flooding firmware debug logs with permission
errors.
Fixes: a83041b1e9 ("net/cxgbe: rework and simplify link handling")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Vasoya <nikhil.vasoya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The metadata can be set in the mbuf dynamic field and then used in
flow rules steering for egress direction. The hardware requires
network order for both the insertion of a rule and sending a packet.
Indeed, there is no strict restriction for the endianness. The order
for sending a packet and its steering rule should be consistent.
In the past, there was no endianness conversion due to the
performance reason. The flow rule converted the metadata into little
endian for hardware (if needed) and the packet hit the flow rule also
with little endian.
After the metadata was converted to big endian, the missing adaption
in the data path resulted in a flow miss of the egress packets.
Converting the metadata to big endian before posting a WQE to the
hardware solves this issue.
Fixes: b57e414b48 ("net/mlx5: convert meta register to big-endian")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In the function mlx5_alloc_shared_dr(), there are various reasons
to result in a failure and error clean up process. While in the
caller of mlx5_dev_spawn(), once there is a error occurring after
the mlx5_alloc_shared_dr(), the mlx5_os_free_shared_dr() is called
to release all the resources.
To prevent a double release, the pointers of the resources should
be checked before the releasing and set to NULL after done.
In the mlx5_free_table_hash_list(), after the releasing, the pointer
was missed to set to NULL and a double release may cause a crash.
By setting the tables pointer to NULL as done for other resources,
the double release and crash could be solved.
Fixes: 54534725d2 ("net/mlx5: fix flow table hash list conversion")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch support new global device syntax like:
bus=pci,addr=BB:DD.F/class=eth/driver=mlx5,devargs,..
In driver parameters check, ignores "driver" key which is part of new
global device syntax instead of reporting error.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch removes the simplification in Virtio descriptors
handling, where their buffer addresses are IOVAs for Virtio
PCI devices, and VA-only for Virtio-user devices, which
added a requirement on Virtio-user that it only supported
IOVA as VA.
This change introduced a regression for applications using
Virtio-user and other physical PMDs that require IOVA as PA
because they don't use an IOMMU.
This patch reverts to the old behaviour, but needed to be
reworked because of the refactoring that happened in v21.02.
Fixes: 17043a2909 ("net/virtio: force IOVA as VA mode for virtio-user")
Cc: stable@dpdk.org
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When attaching to an existing mono queue tap, the virtio-user was not
reporting that the virtio device was not properly initialised which
prevented from starting the port later.
$ ip tuntap add test mode tap
$ dpdk-testpmd --vdev \
net_virtio_user0,iface=test,path=/dev/vhost-net,queues=2 -- -i
...
virtio_user_dev_init_mac(): (/dev/vhost-net) No valid MAC in devargs or
device, use random
vhost_kernel_open_tap(): TUNSETIFF failed: Invalid argument
vhost_kernel_enable_queue_pair(): fail to open tap for vhost kernel
virtio_user_start_device(): (/dev/vhost-net) Failed to start device
...
Configuring Port 0 (socket 0)
vhost_kernel_open_tap(): TUNSETIFF failed: Invalid argument
vhost_kernel_enable_queue_pair(): fail to open tap for vhost kernel
virtio_set_multiple_queues(): Multiqueue configured but send command
failed, this is too late now...
Fail to start port 0: Invalid argument
Please stop the ports first
Done
The virtio-user with vhost-kernel backend was going through a lot
of complications to initialise tap fds only when using them.
For each qp enabled for the first time, a tapfd was created via
TUNSETIFF with unneeded additional steps (see below) and then mapped to
the right qp in the vhost-net backend.
Unneeded steps (as long as it has been done once for the port):
- tap features were queried while this is a constant on a running
system,
- the device name in DPDK was updated,
- the mac address of the tap was set,
On subsequent qps state change, the vhost-net backend fd mapping was
updated and the associated queue/tapfd were disabled/enabled via
TUNSETQUEUE.
Now, this patch simplifies the whole logic by keeping all tapfds opened
and in enabled state (from the tap point of view) at all time.
Unused ioctl defines are removed.
Tap features are validated earlier to fail initialisation asap.
Tap name discovery and mac address configuration are moved when
configuring qp 0.
To support attaching to mono queue tap, the virtio-user driver now tries
to attach in multi queue first, then fallbacks to mono queue.
Finally (but this is more for consistency), VIRTIO_NET_F_MQ feature is
exposed only if the underlying tap supports multi queue.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fix the tunnel port counting logic.
Currently we are incrementing the port count without checking
the if bnxt_hwrm_tunnel_dst_port_alloc would return success or failure.
Modify the logic to increment it only if the firmware returns success.
Fixes: 10d074b202 ("net/bnxt: support tunneling")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
The error recovery async event messages are often mistaken
for errors. Improved the wording to clarify the meaning of
these events.
Also, take the first step towards more inclusive language.
The references to master will be changed to primary.
For example: "bnxt_is_master_func" will be renamed to
"bnxt_is_primary_func()".
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
The device cleanup logic was freeing most of the ring related memory,
but was not freeing up the memzone associated with the rings.
This patch fixes the issue.
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Default queue state of Tx queues on startup is not correct.
Fix this by setting the state when the port is started.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
1. Fix to use correct fields in the request structure of
HWRM_FUNC_DRV_RGTR.
2. Remove the "flags" argument to bnxt_hwrm_func_driver_unregister()
as it is not needed.
Fixes: beb3087f50 ("net/bnxt: add driver register/unregister")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add ice support for new ethdev APIs to enable/disable and read/write/adjust
IEEE1588 PTP timestamps. Currently, only scalar path supports 1588 PTP,
vector path doesn't.
The example command for running ptpclient is as below:
./build/examples/dpdk-ptpclient -c 1 -n 3 -- -T 0 -p 0x1
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The request of getting VF VSI map request may fail when DCF is busy,
this patch adds retry mechanism to make it able to succeed.
Fixes: b09d34ac85 ("net/ice: fix flow redirector")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
In the iavf_init_arq function, if an exception occurs in the
iavf_config_arq_regs function, and the previously applied ARQ (Admin
Receive Queue) bufs resource is released. This patch maintains the same
modification as the iavf_init_asq function to roll back resources.
Fixes: 87aca6d8d8 ("net/iavf/base: fix command buffer memory leak")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the iavf_config_rx_queues_irqs function, the memory pointed to by the
intr_handle->intr_vec and qv_map addresses is not released in the
subsequent hook branch, resulting in resource leakage.
Fixes: f593944fc9 ("net/iavf: enable IRQ mapping configuration for large VF")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use the dynamic mbuf to register timestamp field and flag.
The ice has the feature to dump Rx timestamp value into dynamic
mbuf field by flex descriptor. This feature is turned on by dev
config "enable-rx-timestamp". Currently, it's only supported
under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default VF driver for Intel 700 Series Ethernet Controller already
switch to iavf in DPDK 21.05. And i40evf is no need to maintain now,
so remove i40evf related code.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Due to i40evf will be removed, so there's no need to keep the devargs
option "driver=i40evf" in iavf.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add IPv4 header checksum field selector, it can be used in creating
FDIR or RSS rules related to IPv4 header checksum.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If call ice_flow_rem_entry() directly without checking entry_id, may
cause an ACL flow entry to be freed more than once.
This patch tries to find entry_id first, then call ice_flow_rem_entry()
to avoid the defect.
Fixes: 40d466fa9f ("net/ice: support ACL filter in DCF")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Reviewed-by: Simei Su <simei.su@intel.com>
There is currently a scenario test, which will continuously obtain port
statistics, causing the CPU usage to soar, which does not meet the
demand. After positioning analysis, it is found that the VF and PF
command interaction is completed through the iavf_execute_vf_cmd
function.
After the message is sent, it needs to wait for the interrupt thread to
obtain the response from the PF. For the data, the rte_delay_ms
interface is used here to wait, but the CPU will not be released during
the waiting period of this interface, which will cause the statistics to
keep occupying the CPU. This is also the root cause of the soaring CPU.
The command interaction should belong to the control plane, and there
will not be too high requirements for performance. It is recommended to
wait for the interface iavf_msec_delay to complete without taking up the
CPU time.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Qiming Chen <chenqiming_huawei@163.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The macros PMD_*_LOG already include the line feed character.
Redundant \n are removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Report max/min/align Tx descriptors limits in device info get callback.
Before calling the callback, rte_eth_dev_info_get() provides
default values of nb_min as zero and nb_max as UINT16_MAX that are
not correct for the driver, so one can't rely on them.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
