Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
vhost-cuse is removed, update corresponding comments that are still
referencing it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
if machine level CRC extension are available, offload the
hash to machine provide functions e.g. armv8-a CRC extensions
support it
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
For multi-seg mbuf, ip->total_length should be pkt_len subtract
ether len.
Fixes: 4abe471ed6 ("examples/tep_term: implement VXLAN processing")
Signed-off-by: Michael Qiu <qiudayu@chinac.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
l4_len is not fixed, althrough mostly it is a fixed value,
but when guest using iperf to do some tests, the l4_len
will have another 12 bytes optional fields.
Fixes: 2bb43bd435 ("examples/tep_term: add TSO offload configuration")
Signed-off-by: Michael Qiu <qiudayu@chinac.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Add an option, --dequeue-zero-copy, to enable dequeue zero copy.
One thing worth noting while using dequeue zero copy is the nb_tx_desc
has to be small enough so that the eth driver will hit the mbuf free
threshold easily and thus free mbuf more frequently.
The reason behind that is, when dequeue zero copy is enabled, guest Tx
used vring will be updated only when corresponding mbuf is freed. If mbuf
is not freed frequently, the guest Tx vring could be starved.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
When sending packets from virtual machine which in need of TSO
by hardware NIC, the inner L4 checksum is not correct on the
other side of the cable.
It's because get_psd_sum() depends on PKT_TX_TCP_SEG to calculate
pseudo-header checksum, but currently this bit is set after the
function get_psd_sum() is called. The fix is straightforward.
Move the bit setting before get_psd_sum() is called.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Based on previous fix of offload on VXLAN using i40e, applications
need to set proper tunneling type on ol_flags so that i40e driver
can pass it to NIC.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
l2fwd could be useful for testing virtual devices without the need
of physical ones.
To achieve this, this patch adds a new option to enable/disable the
MAC addresses updating done at forwarding time: --[no-]mac-updating
It enables the use of l2fwd for basic VM to VM communication.
By default, MAC address updating remains enabled, to keep consistency
with previous usage.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The app_worker_thread() and app_mixed_thread() use rte_ring_sc_dequeue_bulk
to dequeue packets from the ring and this imposes restriction on number of
packets in software ring to be greater than the specified value to start
actual dequeue operation, thus, adds latency to those packets. Therefore,
rte_ring_sc_dequeue_bulk is replaced with rte_ring_sc_dequeue_burst.
Fixes: de3cfa2c98 ("sched: initial import")
Suggested-by: Tao Y Yang <tao.y.yang@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
To illustrate the TAP port usage, the sample configuration file with
passthrough pipeline connected to TAP interface is added.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The TAP port support is added to ip_pipeline app. To parse
configuration file with TAP port entries, parsing function is implemented.
The TAP ports configuration check and initialization routines have been
included in application code.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
There is typo in init.c of ip_pipeline example due to which,
invalid file path is added to -d option of EAL i.e path starting
with =.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The network_layers configuration file (config/network_layers.cfg)
demonstrates the various network layer components such as TCP, UDP,
ICMP etc, which can be easily integrated into ip pipeline
infrastructure.
The loopback function (implemented using passthrough pipeline) is
updated to perform swap operation on the IP source and destination
address, and UDP source and destination ports.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Pass-through pipeline is updated with addition of packet fields swap
action. To enable swap action, new entry i.e 'swap' is required in
the passthrough pipeline section of the configuration file, and this
entry contains the offsets (in bytes) of the packet fields to be
swapped.
Each swap entry specifies the pair of packet fields offsets to be
swapped. Therefore, to perform swap action on more than one pair of
packets fields, separate swap entries, each one responsible for unique
pair of packet fields are needed.
Following illustrates the pass-through pipeline configuration that
swaps the source and destination addresses of the mac and tcp
ports of the received packets.
[EAL]
log_level = 0
[PIPELINE0]
type = MASTER
core = 0
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
swap = 256 262; MACDST <-> MACSRC
;swap = 282 286; IPSRC <-> IPDST
swap = 290 292; PORTSRC <-> PORTDST
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The default value of ``file_name`` parameter of the source port structure is
changed from ``NULL`` to ``./config/packets.pcap``.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch initializes the salt value used by the following cipher
algorithms:
- CBC: random salt
- GCM/CTR: the key required is 20B, and the last 4B are used as salt.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Introduce a specific cryptodev queue size macro.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Application will segfault if there is IPv4 or IPv6 and no SP/ACL rules
for IPv4 or IPv6 respectively.
Avoid checking the ACL/SP in such cases.
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
RFC3686: Using AES Counter (CTR) Mode With IPsec ESP.`
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NIST SP800-38A recommends two methods to generate unpredictable IVs
(Initilisation Vector) for CBC mode:
1) Apply the forward function to a nonce (ie. counter)
2) Use a FIPS-approved random number generator
This patch implements the first recommended method by using the forward
function to generate the IV.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch enables ZUC EEA3 cipher algorithm and
ZUC EIA3 authentication algorithm support to
l2fwd-crypto sample application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch adds two sample configuration files to ipsec-secgw sample
application. The sample configuration files show how to setup
back-to-back systems that would forward traffic through an IPsec
tunnel.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. A command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
SNOW 3G algorithm has all uppercase letters in its name
and a space between SNOW and 3G, but some references of it
had some lowercase letters or no space.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
When VMDQ is enabled, different NICs have different behaviors for
disabling VLAN strip. In detail, i40e only enables/disables it of
PF's main vsi; fm10k cannot disable VLAN strip, etc. We now remove
this option, --vlan-strip, to reduce any confusion. And now, VLAN
strip will be enabled and cannot be disabled.
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When examples/vhost runs in client mode, only one QEMU can be connected.
This is because that examples/vhost just supports one socket file. This
patch is to add multiple sockets support for examples/vhost.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
In examples/vhost, "dev-basename" is a program option, which is to set
the vhost-net socket used by vhost-user, or the character device used
by vhost-cuse. Since vhost-cuse should be dropped, and "dev-basename"
is not a suitable name for the vhost-net socket. Therefore, this patch
is to change this option name for examples/vhost.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Now that hotplug has been moved to eal, there is no reason to keep the
device type in this layer.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch fixes ip_pipeline panic in app_init_core_map while preparing cpu
core map in powerpc with SMT off. cpu_core_map_compute_linux currently prepares
core mapping based on file existence in sysfs ie.
/sys/devices/system/cpu/cpu<LCORE_NUM>/topology/physical_package_id
/sys/devices/system/cpu/cpu<LCORE_NUM>/topology/core_id
These files do not exist for lcores which are offline for any reason (as in
powerpc, while SMT is off). In this situation, this function should further
continue preparing map for other online lcores instead of returning with -1
for a first unavailable lcore.
Also, in SMT=off scenario for powerpc, lcore ids can not be always indexed from
0 upto 'number of cores present' (/sys/devices/system/cpu/present). For eg, for
an online lcore 32, core_id returned in sysfs is 112 where online lcores are
10 (as in one configuration), hence sysfs lcore id can not be checked with
indexing lcore number before positioning lcore map array.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Due to regular lintian checks in Debian packaging it surfaced that these
two scripts had a space in their #! statement.
It is changed to an interpreter compatible with Python 2 and 3.
Fixes: 8673a3e8 ("examples/ip_pipeline: add config diagram generator")
Fixes: fa667b46 ("examples/ip_pipeline: add core mappings script")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This configuration is example configuration for flow classification.
This fix changes the offset and mask value to compute the hash correctly.
This fix does not involve code change and do not impact compilation,
build and performance.
Fixes: 93771a569d ("examples/ip_pipeline: rework flow classification CLI")
Signed-off-by: Sankar Chokkalingam <sankarx.chokkalingam@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
There is a dependency on librt with old glibc.
The -lrt option was added everywhere it is needed but was also
added in some applications makefiles as the first link option.
The problem is this option is really useful only if added after
the objects or libraries using it (except if using --whole-archive).
And the -lrt options put after were removed to avoid duplicates.
It was resulting in errors linking test application:
eal_timer.c:(.text+0x128): undefined reference to `clock_gettime'
eal_timer.c:(.text+0x166): undefined reference to `clock_gettime'
eal_alarm.c:(.text+0xda): undefined reference to `clock_gettime'
eal_alarm.c:(.text+0x211): undefined reference to `clock_gettime'
It is fixed by removing superfluous -lrt in app makefiles.
Fixes: 281948b475 ("mk: fix missing librt dependencies")
Fixes: 2f6414f4ba ("mk: fix static link with glibc < 2.17")
Reported-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
icc version 16.0.2, compile error:
examples/l2fwd-ivshmem/host/host.c(157):
error #3656: variable "total_vm_packets_dropped"
may be used before its value is set
total_vm_packets_dropped += ctrl->vm_ports[portid].stats.dropped;
^
Fixes: 6aa4972491 ("examples/l2fwd-ivshmem: import sample application")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In TM, the read size should be lesser than the write size to improve
performance.
This enables the TM ports to push maximum packets to the output port.
This fix changes the burst_read value from 64 to 24 in default_tm_params.
Signed-off-by: Sankar Chokkalingam <sankarx.chokkalingam@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
IP Pipeline application with the configuration for Flow Classification
IPV6 did not instantiate.
Parse error in section "PIPELINE1": entry "dma_src_mask" too long
The dma_src_mask check in pipeline_passthrough_parse_args() is wrong.
This fix increases the length of dma_src_mask by 1 for NULL termination
and corrected the validation of dma_src_mask length.
This fix is also propagated to pipeline_fc_parse_args() for key_mask_str
validation.
Signed-off-by: Sankar Chokkalingam <sankarx.chokkalingam@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Error while executing action flow bulk command
pipeline> p 1 action flow bulk ./config/action.txt
Command "action flow bulk" failed
pipeline>
The flow action entries are added successfully.
But the return value is not computed correctly.
Due to this, the error message appears on CLI.
The return value is computed with rsp->n_flows after rsp pointer is freed.
This fix computes the return value before rsp pointer is freed.
Signed-off-by: Sankar Chokkalingam <sankarx.chokkalingam@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
