Simplify the ifdefs in rte.app.mk to make the code more
readable and maintainable by introducing a internal
_LDLIBS-y variable to build up the LDLIBS variable.
The new internal variable _LDLIBS-y should not be
used outside of the rte.app.mk file.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NO_AUTOLIBS is not required as it was not used or defined in the config files.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With GCC 4.4.7 from CentOS 6.5, the following errors arise:
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_dev_rx_queue_setup':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_set_rsc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_recv_pkts_lro_single_alloc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1479: error: 'next_rsc_entry' may be used uninitialized in this function
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1480: error: 'next_rxe' may be used uninitialized in this function
The "missing initializer" warning is a GCC bug which seems fixed in 4.7.
The same warning is thrown by clang.
The "may be used uninitialized" warning is another GCC bug which seems fixed in 4.7.
Fixes: 8eecb3295a ("ixgbe: add LRO support")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Null PMD was not found when using a statically linked application:
EAL: no driver found for eth_null1
EAL: failed to initialize eth_null1 device
Fixes: c743e50c47 ("null: new poll mode driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The virtio pmd is not restricted to uio anymore.
Fixes: da978dfdc4 ("virtio: use port IO to get PCI resource")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
In case of documents without image, an empty rm command can be seen if V=1.
Remove it to avoid disturbing debugging.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
The fuse library is needed for vhost-cuse as required in commit 28a1ccca41.
The case vhost-user was forgotten for application linking.
Fixes: 28a1ccca41 ("vhost: add build option for vhost-user")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Re-ordered the guide-pdf-% and guide-% rules to allow
the doc-guides-pdf target to build with make 3.81. It
builds unmodified with all later versions of make.
Fixes: ebf8050afd ("doc: add pdf output")
Reported-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add make system support for building PDF versions of
the guides. Requires Python Sphinx and TexLive Full.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Move the rte.extvars.mk to an internal directory and
update rte.vars.mk to find the file in the new location.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The '-fdirectives-only' flag doesn't exist in cpp of FreeBSD.
To remove expanding macros when parsing the config files won't
add any issue.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
40) as well as their virtual functions in SR-IOV context through IB Verbs
(libibverbs) and the dedicated user-space driver (libmlx4).
It is disabled by default due to dependencies on these libraries and only
supports Linux userland at the moment partly because /sys (sysfs) support is
required.
Also claim responsibility in the MAINTAINERS file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
This app demonstrate usage of new rte_jobstats library.
It is basically the orginal l2fwd with following modifications to met
library requirements:
- main_loop() was split into two jobs: forward job and flush job. Logic
for those jobs is almost the same as in original application.
- stats is moved to rte_alarm callback to not introduce overhead of
printing.
- stats are expanded to show rte_jobstats statistics.
- added new parameter '-l' to automatic thousands separator.
Comparing original l2fwd and l2fwd-jobstats apps will show approach what
is needed to properly write own application with rte_jobstats
measurements.
New available statistics:
- Total and % of fwd and flush execution time
- management time - overhead of rte_timer + overhead of rte_jobstats
library
- Idle time and % of time spent waiting for fwd or flush to be ready to
execute.
- per job execution time and period.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Commit 71f0ab1849 broke compilation
on some versions of Debian and Ubuntu where gcc has been modified
to only emit MAJOR.MINOR part of the version from 'gcc -dumpversion'.
Drop the micro-version from gcc version comparisons to work around
this, it wasn't being used for anything anyway.
Fixes: 71f0ab1849 ("mk: rework gcc version detection to permit versions newer than 4.x")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Separately comparing major and minor versions becomes seriously clumsy
when with major version changes, convert the entire version string into
a numeric value (ie 4.6.0 becomes 460 and 5.0.0 becomes 500) and use
that for comparisons, eliminate unnecessary negations while at it.
This makes the comparisons simpler, more obvious and makes gcc 5.0
naturally recognized at least as capable as newest 4.x.
This three-digit scheme would run into trouble if gcc ever went to
two-digit version segments, but that hasn't happened in the last 10+
years so it seems like a safe assumption.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
x32 ABI provides benefits of x86-64 while using 32-bit pointers and
avoiding overhead of 64-bit pointers.
Test report: http://dpdk.org/ml/archives/dev/2015-February/012599.html
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Tested-by: Haifeng Tang <haifengx.tang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding new reorder unit test for the test app.
The command to run the unit test from the test shell is: reorder_autotest
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
1. Add init function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
fm10k_stats_get.
4. Add fm10k.h to define macros and basic data structure.
5. Add fm10k_logs.h to control log message output.
6. Change config/common_bsdapp and config/common_linuxapp, add
macros to control fm10k pmd driver compile for linux and bsd.
7. Add Makefile.
8. Change lib/Makefile to add fm10k driver into compile list.
9. Change mk/rte.app.mk to add fm10k lib into link.
10. Add ABI version of librte_pmd_fm10k
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
librte_vhost is not a plugin but a library, move it to proper section
to fix sample app build in shared, non-combined library setup.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This is all-important now that the libraries are versioned: DT_SONAME
presence instructs the runtime dynamic linker to load the shared object
by the versioned name in DT_SONAME instead of the the unversioned symlink
name used during build.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add initial pass header files to support symbol versioning.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This reverts commit ca0038c009.
It forces clean target of application to have double-colon.
As stated in make doc:
"Double-colon rules are somewhat obscure and not often very useful"
And it's not needed since POSTCLEAN allow to add some clean targets.
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Reported-by: John Mcnamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The vhost library relies on libfuse, and thats included when we do a normal
shared object build, but when we specify combined libs, its gets left out. Add
it back in.
Reported-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In some cases application may want to have additional rules
for clean. This can be handled by allowing the double colon
form of rule.
https://www.gnu.org/software/make/manual/html_node/Double_002dColon.html
Single colon and double colon rules for same target causes
an error.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch add Support for ICC 15.
ICC 15 changed inline-max-size and inline-max-total-size default values,
so for ICC 15 flags -no-inline-max-size -no-inline-max-total-size must be added.
additionally disable compile error for:
13368 - loop was not vectorized with "vector always assert"
15527 - loop was not vectorized: function call to fprintf cannot be vectorize
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When building static archives with CONFIG_COMBINED_LIBS, we still need to
specify --whole-archive to pull in all the proper constructors.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Lyn M <netinal7@gmail.com>
Tested-by: Lyn M <netinal7@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It appeared in commit 21cdc2e77a ("fix 32-bit link with gcc")
that linker options must be prefixed by -Wl, when using CC.
So CPU_LDFLAGS is prefixed in rte.lib.mk.
Then commit 815cfb7925 ("fix link of combined shared library using CC")
introduced another prefixing of CPU_LDFLAGS in rte.sharelib.mk,
included in lib/Makefile.
Because CPU_LDFLAGS is an exported variable, the prefixing is done twice.
Initial patch of commit 815cfb7925 had a workaround but it hasn't
been applied in favor of this proper fix.
Now variables are not overriden when prefixing.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The option "-z muldefs" was set only if not using ld directly.
By the way, this option seems to be a useless hack introduced
with shared and combined libraries support (e25e4d7ef1).
The clean approach is to remove it.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
RTE_LIBNAME was defined only if BUILDING_RTE_SDK.
So external applications like examples were trying to link with -l
without any library name.
This bug appeared after fixing link to combined library (removing
link to separate libraries).
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Commit 944088c2ab ("fix link to combined library") introduced
a check with a wrong configuration option name.
So link is broken in the case combined library is not enabled.
main.o: In function `rte_pktmbuf_free':
main.c:(.text+0x9c): undefined reference to `per_lcore__lcore_id'
Signed-off-by: Yong Liu <yong.liu@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: fix option name in comments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
If we set EXTRA_CFLAGS=-O0, build fails with following error:
/usr/bin/ld: test: hidden symbol `mknod' in /usr/lib64/libc_nonshared.a(mknod.oS) is referenced by DSO
Fix: link combined shared lib using CC if LINK_USING_CC is enabled.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
[Thomas: remove change to rte.lib.mk]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The application should be linked to the single combined library in the
condition that both of CONFIG_RTE_BUILD_COMBINE_LIB and
CONFIG_RTE_BUILD_SHARED_LIB are enabled.
The current makefile generates an application that links to each library.
This patch fixes to link the single library.
Before
$ ldd x86_64-ivshmem-linuxapp-gcc/app/test
linux-vdso.so.1 => (0x00007fff232a1000)
librte_distributor.so => not found
librte_kni.so => not found
librte_ivshmem.so => not found
librte_pipeline.so => not found
librte_table.so => not found
librte_port.so => not found
librte_timer.so => not found
librte_hash.so => not found
librte_lpm.so => not found
librte_power.so => not found
librte_acl.so => not found
librte_meter.so => not found
librte_sched.so => not found
libm.so.6 => /lib64/libm.so.6 (0x00007fc638020000)
librt.so.1 => /lib64/librt.so.1 (0x00007fc637e18000)
librte_kvargs.so => not found
librte_mbuf.so => not found
librte_ip_frag.so => not found
libethdev.so => not found
librte_malloc.so => not found
librte_mempool.so => not found
librte_ring.so => not found
librte_eal.so => not found
librte_cmdline.so => not found
librte_cfgfile.so => not found
librte_pmd_bond.so => not found
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fc637bfe000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007fc6379fa000)
libintel_dpdk.so => not found
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fc6377dd000)
libc.so.6 => /lib64/libc.so.6 (0x00007fc63741c000)
/lib64/ld-linux-x86-64.so.2 (0x00007fc638330000)
After
$ ldd x86_64-ivshmem-linuxapp-gcc/app/test
linux-vdso.so.1 => (0x00007fffb79fe000)
librt.so.1 => /lib64/librt.so.1 (0x00007f0d8a971000)
libm.so.6 => /lib64/libm.so.6 (0x00007f0d8a66f000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f0d8a458000)
libdl.so.2 => /lib64/libdl.so.2 (0x00007f0d8a254000)
libintel_dpdk.so => not found
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f0d8a037000)
libc.so.6 => /lib64/libc.so.6 (0x00007f0d89c76000)
/lib64/ld-linux-x86-64.so.2 (0x00007f0d8ab82000)
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Reviewed-by: Hayato Momma <h-momma@ce.jp.nec.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some applications doesn't have the pcap link flag
when shared libraries are enabled.
Indeed in such case, pcap PMD must not be linked but pcap library should.
Actually -lpcap is always needed if pcap PMD is used,
and -lrte_pmd_pcap must be set only with static PMD library.
So the flags -lrte_pmd_pcap and -lpcap are enabled separately.
Workarounds in test-pmd/ and test-pipeline/ can be removed.
Reported-by: Stepan Sojka <stepan.sojka@adaptivemobile.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Incompatible libraries error when building shared libraries for 32bits on
a 64bits system.
Fix issue by passing CPU_CFLAGS to CC when LINK_USING_CC is enabled.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Only CPU_LDFLAGS is used in mk/rte.sharelib.mk.
It should be LDFLAGS to build the library with correct linkage options.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Reviewed-by: Hayato Momma <h-momma@ce.jp.nec.com>
Ubuntu/Debian toolchain passes --as-needed flag to the linker by default.
Add --no-as-needed flag by default in linuxapp exec-env to ensure correct
linking.
The problem arises because librte_eal doesn't add a DT_NEEDED entry for
librte_mempool despite the fact that it references symbols in that library.
It does this because we don't explicitly link with -lrte_mempool when we
build librte_eal.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: enable for BSD - not tested]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
IBM Power architecture has different cache line size (128 bytes) than
x86 (64 bytes). This patch defines CACHE_LINE_SIZE to 128 bytes to
override the default value 64 bytes to support IBM Power Architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power processor doesn't have CPU flag hardware registers. This patch
uses aux vector software register to get CPU flags and add CPU flag
checking support for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
To make DPDK run on IBM Power architecture, configuration files for
Power architecuture are added. Also, the compiling related .mk files are
added.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This is a Linux-specific virtual PMD driver backed by an AF_PACKET
socket. This implementation uses mmap'ed ring buffers to limit copying
and user/kernel transitions. The PACKET_FANOUT_HASH behavior of
AF_PACKET is used for frame reception. In the current implementation,
Tx and Rx queues are always paired, and therefore are always equal
in number -- changing this would be a Simple Matter Of Programming.
Interfaces of this type are created with a command line option like
"--vdev=eth_af_packet0,iface=...". There are a number of options available
as arguments:
- Interface is chosen by "iface" (required)
- Number of queue pairs set by "qpairs" (optional, default: 1)
- AF_PACKET MMAP block size set by "blocksz" (optional, default: 4096)
- AF_PACKET MMAP frame size set by "framesz" (optional, default: 2048)
- AF_PACKET MMAP frame count set by "framecnt" (optional, default: 512)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[Thomas: disable because of incompatibility with some kernels]
No need to keep the same code duplicated for 32 and 64bits x86.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Chao Zhu <bjzhuc@cn.ibm.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When building shared libs (for both GCC and CLANG targets), -fPIC flag
has been added to CFLAGS and leaks to BSD module build system causing
the following error:
fatal error: error in backend: Cannot select: 0x802ad8010: i64 = X86ISD::WrapperRIP 0x802ade110
[ID=13]
0x802ade110: i64 = TargetGlobalAddress<i8** @__stack_chk_guard> 0 [TF=5] [ID=10]
Reset CFLAGS to MODULE_CFLAGS before building BSD module.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
With make 3.x, guides-% is matched instead of guides-%-clean.
Move the less specific target pattern (guides-%) at the end
to allow matching guides-%-clean first.
Reported-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add minimal configuration and index to validate new rules
inside "make doc" and "make doc-clean".
RTE_SPHINX_BUILD can be overriden.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
RTE_OUTPUT variable is always defined, unlike $O.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
At least on kernels 3.15 or newer, wrong compiler flags are set when building
kernel modules.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Linux kernel build system requires V=1 to enable verbose output, but
current DPDK framework just check if V is defined.
Fix: force V=1 when building Linux kernel modules if verbose output is
enabled.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
vhost lib is turned off by default.
vhost lib is based on cuse, which requires fuse development package
to be installed.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
[Thomas: fix build dependencies]
Add support for clang by adding a toolchain folder for it with the
appropriate files.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
[Thomas: CC from command line overrides HOSTCC]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a special case to the native target makefile, where we check if
-march=native shows SSE4.2 support. If it does not, then not everything may
build, so we check if the hardware supports SSE4.2, and use a corei7 target
explicitly to get the SSE4.2 support.
Then ACL library, which requires SSE4.2, can be re-enabled for FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When overriding the CC variable on the commandline, the HOSTCC value
was remaining at "gcc", which caused errors on Free BSD10 when using a gcc
as e.g. gcc48, without a binary just called "gcc". This change overrides
HOSTCC when CC is overridden, which means that setting CC=gcc48, will
now also set HOSTCC=gcc48, allowing the "testhost" app to compile on
BSD10.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This library provides a tool to interpret config files that have
standard structure.
It is used by the Packet Framework examples/ip_pipeline sample application.
It originates from examples/qos_sched sample application and now it makes
this code available as a library for other sample applications to use.
The code duplication with qos_sched sample app to be addressed later.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The Packet Framework pipeline library provides a standard methodology
(logically similar to OpenFlow) for rapid development of complex packet
processing pipelines out of ports, tables and actions.
A pipeline is constructed by connecting its input ports to its output ports
through a chain of lookup tables. As result of lookup operation into the
current table, one of the table entries (or the default table entry, in case
of lookup miss) is identified to provide the actions to be executed on the
current packet and the associated action meta-data.
The behavior of user actions is defined through the configurable table action
handler, while the reserved actions define the next hop for the current packet
(either another table, an output port or packet drop) and are handled
transparently by the framework.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the operations to be implemented by
any Packet Framework table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the port operations that have to be implemented
by Packet Framework ports.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This adds the code for a new Intel DPDK library for packet distribution.
The distributor is a component which is designed to pass packets
one-at-a-time to workers, with dynamic load balancing. Using the RSS
field in the mbuf as a tag, the distributor tracks what packet tag is
being processed by what worker and then ensures that no two packets with
the same tag are in-flight simultaneously. Once a tag is not in-flight,
then the next packet with that tag will be sent to the next available
core.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: add doxygen @file comment]
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Error message for missing template is factorized in notemplate rule.
RTE_OUTPUT directory is marked as order-only prerequisite.
RTE_OUTPUT is always created after having been cleaned for rte_config.h.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by Olivier Matz <olivier.matz@6wind.com>
When running "make config", an additional config.orig file is also
generated, which is intended to hold the original, clean configuration
from the template.
When running make install, we first check if there is no existing
.config file, and run make config if not. If there is a file, we then
check if it's unmodified, in which case we regenerate a new .config to
take account of any possible updates to the template. Finally, in the
case where there is an existing .config file, and it HAS been modified,
we then do a check to see if the template has had further updates, and
throw an error if so. If no updates, we continue with the build using
the existing, user-modified config.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Some linker options were not prefixed by -Wl, when using CC:
-z muldefs
-melf_i386 (CPU_LDFLAGS in 32-bit config)
I didn't see any error with -z muldefs but it isn't documented in gcc
manual. So it's safer to explicitly pass it to the linker.
Also building 32-bit shared library raises this error:
gcc: error: unrecognized command line option ‘-melf_i386’
Using macro linkerprefix fixes it.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The variable CONFIG_RTE_BUILD_SHARED_LIB was in rte.app.mk as
"RTE_BUILD_SHARED_LIB", which meant that none of the example apps linked
in the PMDs and just didn't work with any eth ports in any static builds.
This bug has been introduced in commit 3660cdf990:
pcap: convert to use of PMD_REGISTER_DRIVER and fix linking
Link for l2fwd before patch:
"... -Wl,--whole-archive -Wl,-lrte_kni -Wl,-lrte_timer -Wl,-lrte_hash
-Wl,-lrte_lpm -Wl,-lrte_power -Wl,-lrte_meter -Wl,-lrte_sched -Wl,-lm
-Wl,-lrt -Wl,--start-group -Wl,-lrte_kvargs -Wl,-lrte_mbuf -Wl,-lethdev
-Wl,-lrte_malloc -Wl,-lrte_mempool -Wl,-lrte_ring -Wl,-lrte_eal
-Wl,-lrte_cmdline -Wl,-lrt -Wl,-lm -Wl,-ldl -Wl,--end-group
-Wl,--no-whole-archive"
Link for l2fwd after patch:
"... -Wl,--whole-archive -Wl,-lrte_kni -Wl,-lrte_timer -Wl,-lrte_hash
-Wl,-lrte_lpm -Wl,-lrte_power -Wl,-lrte_meter -Wl,-lrte_sched -Wl,-lm
-Wl,-lrt -Wl,--start-group -Wl,-lrte_kvargs -Wl,-lrte_mbuf -Wl,-lethdev
-Wl,-lrte_malloc -Wl,-lrte_mempool -Wl,-lrte_ring -Wl,-lrte_eal
-Wl,-lrte_cmdline -Wl,-lrte_pmd_vmxnet3_uio -Wl,-lrte_pmd_virtio_uio
-Wl,-lrte_pmd_ixgbe -Wl,-lrte_pmd_e1000 -Wl,-lrte_pmd_ring -Wl,-lrt
-Wl,-lm -Wl,-ldl -Wl,--end-group -Wl,--no-whole-archive"
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Convert the vmxnet3 pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the vmxnet3 library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the virtio pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the virtio library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ixgbevf pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the ixgbevf library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the e1000 pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the e1000 library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the xenvirt driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the xenvirt library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
A few notes:
xenvirt was unbuildable as of commit 4c39baf297d10c217e7d3e7370f26a1fede58308..
That commit neglected to include the rte_vdev.h header, so several structs were
left undefined. This patch includes a fix for that as well.
Also, The linkage for xenvirt is broken in much the same way pmd_ring was, in
that the xenvirt pmd has a function that is called directly from applications
(the example being the testpmd application). The function is
rte_mempool_gntalloc_create, and should clearly be moved into the rte_mempool
library, with the supporting code in the function implementation moved to a new
xenvirt library separate from the pmd. This is a large undertaking that
detracts from the purpose of this series however, and so for now, I'm leaving
the linkage to the application in place, and will address this issue in a later
series
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ring driver to use the PMD_REGISTER_DRIVER macro and fix up the
Makefile so that its linkage is only done if we are building static libraries.
This means that the test applications now have no reference to the ring library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Note that the ring driver was also written in such a way that it violated some
general layering principles, several functions were contained in the pmd which
were being called by example from the test application in the app/test
directory. Specifically it was calling eth_ring_pair_attach,
eth_ring_pair_create and rte_eth_ring_devinit, which should only be called
internally to the dpdk core library. To correct this I've removed those
functions, and instead allowed them to be called indirectly at initalization
time using the vdev command line argument key nodeaction=<name>:<node>:<action>
where action is one of ATTACH or CREATE. I've tested out the functionality of
the command line with the testpmd utility, with success, and have removed the
called functions from the test utility. This will affect how the test utility
is invoked (the -d and --vdev option will need to be specified on the command
line now), but honestly, given the way it was coded, I think the testing of the
ring pmd was not the best example of how to code with dpdk to begin with. I
have also left the two layer violating functions in place, so as not to break
existing applications, but added deprecation warnings to them so that apps can
migrate off them.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the pcap driver to use the PMD_REGISTER_DRIVER macro and fix up the
Makefile so that its linkage is only done if we are building static libraries.
This means that the test applications now have no reference to the pcap library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It is now possible to build all projects from the examples/ directory
using one command from root directory.
Some illustration of what is possible:
- build examples in the DPDK tree for one target
# install the x86_64-default-linuxapp-gcc in
# ${RTE_SDK}/x86_64-default-linuxapp-gcc directory
user@droids:~/dpdk.org$ make install T=x86_64-default-linuxapp-gcc
# build examples for this new installation in
# ${RTE_SDK}/examples directory
user@droids:~/dpdk.org$ make examples T=x86_64-default-linuxapp-gcc
- build examples outside DPDK tree for several targets
# install all targets matching x86_64-*-linuxapp-gcc in
# ${RTE_SDK}/x86_64-*-linuxapp-gcc directories
user@droids:~/dpdk.org$ make install T=x86_64-*-linuxapp-gcc
# build examples for these installations in /tmp/foobar
user@droids:~/dpdk.org$ make examples T=x86_64-*-linuxapp-gcc O=/tmp/foobar
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This makefile can be included by a project that needs to build several
applications or libraries that are located in different directories.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Trying to install headers for an external library using DPDK exported makefile
rte.extshared.mk results in following error :
$ cd dpdk
$ make install DESTDIR=/home/marchand/myapp/staging/plop T=x86_64-default-linuxapp-gcc
$ cd ~/myapp
$ make RTE_SDK=/home/marchand/myapp/staging/plop RTE_TARGET=x86_64-default-linuxapp-gcc
CC plop.o
LD plop.so
SYMLINK-FILE include/plop.h
/bin/sh:
/home/marchand/myapp/staging/plop/scripts/relpath.sh: No such file or directory
ln: `/home/marchand/myapp/build/include' and `./include' are the same file
make[1]: *** [/home/marchand/myapp/build/include/plop.h] Error 1
make: *** [all] Error 2
This comes from the fact that DPDK only installs its mk/ directory while some
makefiles require the scripts/ directory content as well.
So install missing files from scripts/.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Start development cycle for version 1.7.0.
This new development workflow introduces a new versioning scheme.
Instead of having releases r0, r1, r2, etc, there will be release
candidates. Last number has special meanings:
< 16 numbers are reserved for release candidates (RTE_VER_SUFFIX is -rc)
16 is reserved for the release (RTE_VER_SUFFIX must be unset)
> 16 numbers can be used locally (RTE_VER_SUFFIX must be set)
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The config templates can be seen with "make showconfigs", "make config" or
"make help". It's easier to read if it's sorted.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If some DPDK libraries are installed on the system, the linker was trying
to use them before searching in -L path.
The obscure reason is that we were prefixing -L with -Wl, to pass it
directly to the linker.
But -L is also a gcc option. And allowing gcc to process this option fixes
the issue.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This allows to use V=1 to be more verbose to debug the build process
of a bsd kernel module.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The shared libraries built with the current makefile set produce static
libraries rather than actual shared objects. This is due to several missing
options that are required to correctly build shared objects using ld, as well as
a mis-specified -share option (which should be -shared). Switching to the use of
CC rather than LD and fixing the -shared option corrects these problems and
builds the DSOs correctly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Pass CROSS_COMPILE to the kernel build system when compiling kernel
modules. Although we export CC etc. the top level kernel Makefile will
override the environment. As a result it will end up using wrong tools
if cross-compilation is desired but CROSS_COMPILE is not set.
Signed-off-by: Aaro Koskinen <aaro.koskinen@nsn.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
To fully support dpdk extensions (loading of .so), all symbols provided
by dpdk libraries must be available in the binaries: before this patch,
unused functions/variables from dpdk static libraries could be stripped
by the linker because they are not used. These symbols can be used by a
dpdk extension that is loaded at runtime with the -d option.
Adding --whole-archive when generating a binary solves this issue.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
If .config file is changed and .depdirs was built before,
it must be updated.
It is now done silently (-s) in checkconfig rule.
Now .depdirs is not redone if .config is older.
It has been tested by enabling PMD_PCAP after a default build.
KVARGS dependency should appear in .depdirs.
There is also a typo fix for PHONY rule.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
In order to distinguish clearly this implementation from the extension
vmxnet3-usermap, it is renamed to reflect its usage of uio framework.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Thomas Graf <tgraf@redhat.com>
In order to distinguish clearly this implementation from the extension
virtio-net-pmd, it is renamed to reflect its usage of uio framework.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Chris Wright <chrisw@redhat.com>
This reverts commits
a0cdfcf9 (use pcap-config to guess compilation flags),
ef5b2363 (fix build with empty LIBPCAP_CFLAGS) and
60191b89 (fix build when pcap_sendpacket is unavailable).
These patches are creating more problems than solving the initial one
(which was a build error with too old pcap libraries).
Since old pcap libraries are not that common, just revert them.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In rte.sdkbuild.mk with CONFIG_RTE_LIBRTE_PMD_PCAP=y,
we error-exit if LIBPCAP_CFLAGS is empty.
On some distros (e.g., Centos 6.4), it is normal for "pcap-config --cflags"
to output only a newline, because pcap header files reside in /usr/include/.
Solution is to remove the line that checks whether LIBPCAP_CFLAGS is empty.
Signed-off-by: Robert Sanford <rsanford@prolexic.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use pcap-config to populate CFLAGS and LDFLAGS.
LIBPCAP_CFLAGS and LIBPCAP_LDFLAGS can be used to override this (useful when
cross-compiling).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add an option to specify libraries to be loaded before probing the PCI.
For instance, testpmd -d librte_pmd_xxx.so can be used to enable xxx driver
support on testpmd without any recompilation of testpmd.
Plugins are loaded before creating threads because we want the threads to
inherit any property that could be set while loading a plugin, such as iopl().
Signed-off-by: Damien Millescamps <damien.millescamps@6wind.com>
Signed-off-by: Jean-Mickael Guerin <jean-mickael.guerin@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Before recompiling a file, rte.compile-pre.mk checks whether the command
line is different from the previous one.
This is done by storing for each object file the entire command line in a
kind of dependency file with a .cmd extension (see obj2cmd). If that file
exists, the line is retrieved first and compared against $(C_TO_O_STR).
The object file gets recompiled if the file doesn't exist or if the line
is different.
The problem is that sometimes, files are recompiled for no apparent reason.
The check doesn't work properly when a command line contains double-quoted
strings such as -DFOO='"bar"' because the shell interprets and strips them.
This is fixed by protecting C_TO_O_CMD with simple quotes, knowing that
such quotes are already escaped in C_TO_O_STR.
Moreover, because simple quotes are escaped in C_TO_O_STR, the retrieved
command should be compared against C_TO_O instead.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The GCC prefix -Wl was ignored because the command line value has higher priority.
It ended in impossibilty for GCC to pass parameters to LD.
The prefixed value must override the command line one.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add mk/rte.shared.mk and mk/rte.extshared.mk in framework to
allow shared libraries compilation through framework
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
This will install the binary sdk (bin + modules + libs + headers + mk)
in the specified directory.
This directory can be used as RTE_SDK by external applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This allows the user to prepare a configuration with make config
before using make install.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This variable $(O) can be used to specify a build directory
when doing an "install" procedure. The default is ".", which
means that targets will be built in the source dpdk.
This option is useful to compile outside of the source tree that may be
read-only.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The goal of this rule is to show which rules/options are available from a
"make" command.
Let's start by printing short doc about SDK building.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Allow to list configs in config/ directory with a simple make rule.
The rule showconfigs is reused in config error.
In the same time, "echo -n" is replaced by the more portable "printf".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The parameter PROJECT_NUMBER is used in the HTML header
via the template variable $projectnumber.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The version string is extracted from rte_version.h.
RTE_VER_* macros are concatenated and separators " . . r " are inserted.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
- add index page
- add doxygen configuration for API
- add doxygen CSS customization applied by a script
- HTML generation via make rules
The configuration is splitted in a static file and a make rule in order to
dynamically configure output format and path.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
It seems that doc/ has been removed so these rules are useless.
This clean-up is preliminary to generate some doc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
rte.sdkroot.mk is mainly calling other makefiles.
These redirecting rules can be factorized by called makefile.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Poll Mode Driver for Paravirtual VMXNET3 NIC.
As a PMD, the VMXNET3 driver provides the packet reception and transmission
callbacks, vmxnet3_recv_pkts and vmxnet3_xmit_pkts. It does not support
scattered packet reception as part of vmxnet3_recv_pkts and
vmxnet3_xmit_pkts. Also, it does not support scattered packet reception as part of
the device operations supported.
The VMXNET3 PMD handles all the packet buffer memory allocation and resides in
guest address space and it is solely responsible to free that memory when not needed.
The packet buffers and features to be supported are made available to hypervisor via
VMXNET3 PCI configuration space BARs. During RX/TX, the packet buffers are
exchanged by their GPAs, and the hypervisor loads the buffers with packets in the RX
case and sends packets to vSwitch in the TX case.
The VMXNET3 PMD is compiled with vmxnet3 device headers. The interface is similar
to that of the other PMDs available in the Intel(R) DPDK API. The driver pre-allocates the
packet buffers and loads the command ring descriptors in advance. The hypervisor fills
those packet buffers on packet arrival and write completion ring descriptors, which are
eventually pulled by the PMD. After reception, the Intel(R) DPDK application frees the
descriptors and loads new packet buffers for the coming packets. The interrupts are
disabled and there is no notification required. This keeps performance up on the RX
side, even though the device provides a notification feature.
In the transmit routine, the Intel(R) DPDK application fills packet buffer pointers in the
descriptors of the command ring and notifies the hypervisor. In response the hypervisor
takes packets and passes them to the vSwitch. It writes into the completion descriptors
ring. The rings are read by the PMD in the next transmit routine call and the buffers
and descriptors are freed from memory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This provides a para-virtualization packet switching solution, based on the
Xen hypervisor’s Grant Table, which provides simple and fast packet
switching capability between guest domains and host domain based on
MAC address or VLAN tag.
This solution is comprised of two components; a Poll Mode Driver (PMD)
as the front end in the guest domain and a switching back end in the
host domain. XenStore is used to exchange configure information
between the PMD front end and switching back end,
including grant reference IDs for shared Virtio RX/TX rings, MAC
address, device state, and so on.
The front end PMD can be found in the Intel DPDK directory lib/
librte_pmd_xenvirt and back end example in examples/vhost_xen.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
These library changes provide a new Intel DPDK feature for communicating
with virtual machines using QEMU's IVSHMEM mechanism.
The feature works by providing a command line for QEMU to map several hugepages
into a single IVSHMEM device. For the guest to know what is inside any given IVSHMEM
device (and to distinguish between Intel(R) DPDK and non-Intel(R) DPDK IVSHMEM
devices), a metadata file is also mapped into the IVSHMEM segment. No work needs to
be done by the guest application to map IVSHMEM devices into memory; they are
automatically recognized by the Intel(R) DPDK Environment Abstraction Layer (EAL).
Changes in this patch:
* Changes to EAL to allow mapping of all hugepages in a memseg into a single file
* Changes to EAL to allow ivshmem devices to be transparently mapped in
the process running on the guest.
* New ivshmem library to create and manage metadata exported to guest VM's
* New ivshmem compilation targets
* Mempool and ring changes to allow export of structures to a VM and allow
a VM to attach to those structures.
* New autotests to unit tests this functionality.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for haswell based systems.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
For cases where the compilation microarchitecture is explicitly given, we
extract the cpu-flags to use from the compiler rather than hard-coding. This
means that we will only ever use instruction sets supported by the compiler,
rather than having a case where the uarch and the Intel DPDK both support a
given instruction-set, but the compiler does not.
In the case where 'native' uarch support is requested, the same mechanism is
also used to detect the instruction-sets supported
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
- Configuration for combined and shared library was only in the template
defconfig_x86_64-default-linuxapp-gcc.
- CONFIG_RTE_LIBNAME was in the wrong section
- RTE_LIBNAME had no quote in "C context" (include/rte_config.h)
- and then CONFIG_RTE_LIBNAME quotes were not properly removed in "make context"
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Changes to allow compilation and use on FreeBSD. Includes:
* contigmem and nic_uio driver for FreeBSD
* new EAL instance
* new "bsdapp" compilation target
* various compilation fixes due to differences between linux and freebsd
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
In rte.toolchain-compat.mk, ensure MACHINE_CFLAGS is initialized when
using GCC 4.7. Update the GCC 4.6 test to also include GCC 4.7.
Signed-off-by: Krzysztof Witek <krzysztof.witek@6wind.com>
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Using gcc is wrong, we should use the cross gcc to detect the
version of gcc.
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
