These are driver MACsec configuration routines.
They fill in config structures and prepare these
to be send to FW. Actual configuration will happen in
link interrupt handler.
We declare MACsec offload bits in DPDK offload capabilities
and provide external experimental MACsec API wrappers.
Also update documentation with feature matrix for the
enabled feature.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Here we define hardware and software configuration structures
for MACsec interface. MACSEC itself is implemented in Phy module,
but its configuration is done via firmware interface
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
When launch testpmd with VF and quit testpmd, there'll
be lots of messages "i40evf_handle_aq_msg(): Request 0
is not supported yet", which are triggered during VF
reset and VF needn't do anything. So cancel alarm handler
before VF reset to ignore the admin queue messages.
Fixes: e0e6a7f2154e ("net/i40e: cancel alarm handler at the end of closure")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable CLEARPBA bit is required by ice NIC of A0/A1 version to
enable Tx and Rx queue interrupt.
Also enable CLEARPBA bit does no impact on IAVF behaviour when be
hosted by other devices, so we can make it as default.
Fixes: d6bde6b5eae9 ("net/avf: enable Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
We should use ETH_AF_XDP_RX_BATCH_SIZE in Rx function rather than
ETH_AF_XDP_TX_BATCH_SIZE.
Fixes: f1debd77efaf ("net/af_xdp: introduce AF_XDP PMD")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
As David pointed out, if we reserve N slots for Tx, but only submit n
slots, we would end up with an incorrect opinion of the number of available
slots later, we also would get wrong idx when we call
xsk_ring_prod__reserve next time. It also applies to
xsk_ring_cons__peek()/xsk_ring_cons__release().
This patch ensures that both reserve/submit and peek/release are
consistent.
Fixes: f1debd77efaf ("net/af_xdp: introduce AF_XDP PMD")
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Properly report mtu capability in port device info.
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When it fails to allocate enough slots in Tx queue for transmitting
packets, we need to return the dequeued addrs to buf ring.
Fixes: f1debd77efaf ("net/af_xdp: introduce AF_XDP PMD")
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When eth_virtio_dev_init() is cleaning up, it does not correctly set
the mac_addrs variable to NULL, which will lead to a double free.
Found during unit-test fixes.
Fixes: 43d18765c027 ("net/virtio: fix memory leak on failure")
Cc: stable@dpdk.org
Reported-by: Michael Santana <msantana@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The function rte_vlan_insert may allocate a new buffer for the
vlan header and return a different mbuf than originally passed.
In this case, the stored mbuf in txm[] array could point to wrong
buffer.
Fixes: dd856dfcb9e7 ("virtio: use any layout on Tx")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When device promiscuous mode has already been enabled,
should not return error if user re-enable it.
Fixes: c945e4bf9063 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Variable "status" should be defined as "enum ice_status"
instead of "uint16_t". This patch fixes the issue.
Fixes: c945e4bf9063 ("net/ice: support promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Ying A Wang <ying.a.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
iavf driver reset the dev_info structure. This action will clear
the setting in core library. This patch fix that issue.
Fixes: 69dd4c3d0898 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The vring relay thread is created after HW datapath start and is
canceled before HW datapath stop, so we need to take care of the
ring update when the relay thread is not on duty.
Fixes: 4bb531e152d3 ("net/ifc: support SW assisted VDPA live migration")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
The mediated vring's index should be set as initial value before
enabling HW datapath.
Fixes: 4bb531e152d3 ("net/ifc: support SW assisted VDPA live migration")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Relay for Tx queue doesn't provide any benefit, since the packet buffer
in Tx queue is read-only, there's no dirty page logging for Tx buffer.
This change further reduces CPU usage and improves throughput.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
On xmit side, there should be a check whether BD ring
has free BDs available before transmit a packet to avoid
data corruption and buffer leak issue.
Fixes: 469c6111a799 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Support for SXGMII port has been enabled. It will
depends on boot loader information passed through IERB.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
There was an error at rte_constant_bswap64 while compiling
with big endian toolchain. so fixing it by adding type cast.
Also, rte_pktmbuf_alloc API should be used to allocate mbuf
instead of rte_pktmbuf_raw_alloc to avoid use of stale mbuf
information.
Fixes: 469c6111a799 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
First configure ring with BDs properly then enable
the ring.
Fixes: 469c6111a799 ("net/enetc: enable Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
The RSS validation function was missing the verifcation that
if RSS is requested on inner packet, the flow must have tunnel data.
Fixes: 23c1d42c7138 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Enable the optic module vendor and part number verification from driver
by setting appropriate flags. Link handling module in conjunction with
FW performs optic module verification.
Without this fix the SFP is powered down and the link doesn't come up,
if module verification is enforced in nvram setting.
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
The periodic callout function and the interrupt handler both modify the
periodic flags. There is a possible race condition when an application
is going through dev_stop()/dev_start() and an interrupt handler is
invoked. We also need to ensure that periodic polling is not invoked in
interrupt context.
This patch handles such case by using separate variable to check for
interrupt context. Also, atomically load and store the periodic flag
value.
Fixes: 0f6ebeee2402 ("net/bnx2x: fix call to link handling periodic function")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
In some cases, DPDK application may send packets
while PMD is going through load or unload flow.
This causes firmware to access invalid/unallocated
memory to process transmit buffer. Which results in
error on PCI bus and chip further blocks access to host,
causing a DMAE timeout.
Fix this issue by installing dummy empty transmit and receive
handlers at the beginning of unload path (rte_eth_dev_stop())
and install actual transmit and receive handlers after successful
load of the PMD port (rte_eth_dev_start()). This way, application
won't be able to send packets while device is going through
load/unload flow.
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
There is a race condition while processing RAMROD
completion in fast path queue through interrupt handler
and polling method.
Interrupt handler invoked from actual interrupt event
and from RAMROD processing polling flow may create a
situation where one flow will read and clear a fastpath
interrupt without actually processing the RAMROD completion.
Thus, causing a RAMROD timeout even though HW sent an
completion event.
Fix this by introducing an atomic variable which will be
set only when interrupt handler needs to process RAMROD
completion.
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
We allocate DMA memory but never free after using it.
Add function to free DMA memory.
Fixes: b5bf7719221d ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Fix to update eth dev MTU for jumbo frames
Fixes: 540a211084a7 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
If MLNX_OFED is installed, there's no .pc file installed for libraries and
dependency() can't find libraries by pkg-config. By adding fallback of
using cc.find_library(), libraries are properly located.
Fixes: e30b4e566f47 ("build: improve dependency handling")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch stopped LLDP by default to avoid the statistics error.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
No need to add additional vlan tag size for max packet size, since
for i40e, the queue's Rx Max Frame Size (rxq->max_pkt_len) already
includes the vlan header size.
Fixes: a3c83a2527e1 ("net/i40e: enable runtime queue setup")
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Fixes: c1715402df8f ("i40evf: fix jumbo frame support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
The result of the endian conversion was not being used incorrectly.
Fixes: b11cceb83a34 ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The vlan pattern handler currently assumes the NIC always strips vlan
header from the L2 buffer, regardless of the vlan strip setting. But,
with older VIC models, the vlan header is actually present in the L2
buffer if stripping is disabled. So in this case, the inner ether type
needs to be shifted by that much.
Fixes: 6ced137607d0 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently, the raw item is always preceded by a UDP header, and both
land in the L4 pattern buffer. So consider the UDP header size when
checking if the raw spec fits in the L4 buffer.
Coverity issue: 336796, 336850
Fixes: 477959e6eeb0 ("net/enic: enable limited support for raw flow item")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
