Multiple PMDs have dummy/noop Rx/Tx packet burst functions.
These dummy functions are very simple, introduce a common function in
the ethdev and update drivers to use it instead of each driver having
its own functions.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Meson 0.61.1 is giving warnings that the calls to run_command do not
always explicitly specify if the result is to be checked or not, i.e.
there is a missing "check" parameter. This is because the default
behaviour without the parameter is due to change in the future.
We can fix these warnings by explicitly adding into each call whether
the result should be checked by meson or not. This patch therefore
adds in "check: false" to each run_command call where the result is
being checked by the DPDK meson.build code afterwards, and adds in
"check: true" to any calls where the result is currently unchecked.
Bugzilla ID: 921
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
When the ETH spec is empty MLX4 PMD doesn't allow match other criteria,
which means the flow should be promisc one.
Currently, PMD validates this by setting flow->promisc bit when ETH spec
is empty and checking whether there is other rte_flow_item followed
when flow->promisc is on.
However, commit [1] adds support to match traffic only on VLAN id, the
above validation logic should be changed accordingly.
This patch changes the above validate logic by skipping flow->promisc
check if this item is VLAN.
[1]:
Fixes: c0d2392631 ("net/mlx4: support flow w/o ETH spec and with VLAN")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some docs and comments in Meson files are still mentioning
the old build system based on "make", removed in 20.11.
After one year, such references are better to be removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
'dev_gen' is a variable to trigger all cores to flush their local caches
once the global MR cache has been rebuilt.
This is due to MR cache's R/W lock can maintain synchronization between
threads:
1. dev_gen and global cache updating ordering inside the lock protected
section does not matter. Because other threads cannot take the lock
until global cache has been updated. Thus, in out of order platform,
even if other agents firstly observe updated dev_gen but global does
not update, they still have to wait the lock. As a result, it is
unnecessary to add a wmb between global cache rebuilding and updating
the dev_gen to keep the memory store order.
2. Store-Release of unlock provides the implicit wmb at the level
visible by software. This makes 'rebuilding global cache' and 'updating
dev_gen' be observed before local_cache starts to be updated by other
agents. Thus, wmb after 'updating dev_gen' can be removed.
Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently, configuring a mlx device, it will allocate its
own process private in mlx5_proc_priv_init() and only frees
it when closing the device. This will lead to a memory leak,
when a device is configured repeatedly.
For example:
for(...)
do
rte_eth_dev_configure
rte_eth_rx_queue_setup
rte_eth_tx_queue_setup
rte_eth_dev_start
rte_eth_dev_stop
done
Fixes: 97d37d2c1f ("net/mlx4: remove device register remap")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The memory barrier is used to ensure that the response is returned
only after the Tx/Rx function is set, it should place after the Rx/Tx
function is set.
Fixes: 0203d33a10 ("net/mlx4: support secondary process")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The mlx4 PMD tracks the buffers (mbufs) for the packets being
transmitted in the dedicated array named as "elts". The tx_burst
routine frees the mbufs from this array once it needs to rearm
the hardware descriptor and store the new mbuf, so it looks
like as replacement mbuf pointer in the elts array.
On the device stop mlx4 PMD freed only the part of elts according
tail and head pointers, leaking the rest of buffers, remained in
the elts array.
Fixes: a2ce2121c0 ("net/mlx4: separate Tx configuration functions")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
If RSS action contains non zero hash key length and NULL
key buffer pointer the default hash key should be used.
The check for the NULL pointer this was missing in the mlx4
PMD causing crash, for example, in testpmd with command:
flow validate 0 ingress group 0
pattern eth / ipv4 / end
actions rss queues 0 end key_len 40 / end
Fixes: ac8d22de23 ("ethdev: flatten RSS configuration in flow API")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The macro DEBUG was doing nothing if not compiled with
RTE_LIBRTE_MLX4_DEBUG.
As it is not used in the data path, it can be always enabled at
compilation time. Then it can be enabled at runtime with:
--log-level pmd.net.mlx4:debug
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, the secondary process port UAR register mapping used by Tx
queue is done during port initializing.
Unluckily, in port hot-plug case, the secondary process will be
requested to initialize the port when primary process probe the port.
At that time, the port Tx queue number is still not configured, the
secondary process get Tx queue number as 0. This causes the UAR register
not be mapped as secondary process get Tx queue number 0.
This commit adds the check of Tx queue number in secondary process when
port starts is requested. Once the Tx queue number is not matching, do
UAR mapping with the latest Tx queue number.
Fixes: 0203d33a10 ("net/mlx4: support secondary process")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In mlx4 PCI probing, there are some validations for the Ethernet device
configuration.
From each PCI device the function creates one or two Ethernet devices.
When one of validations fails during the creation of the second device,
the first device is not freed what caused a memory leak.
Free it.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: David Marchand <david.marchand@redhat.com>
When mlx4 device is probed, 2 different ethdev ports may be created for
the 2 physical ports of the device.
Wrongly, when the device is removed, the created ports are not released.
Close and release the ethdev ports in remove process.
Bugzilla ID: 488
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: David Marchand <david.marchand@redhat.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Meson can use cmake as a fallback for detecting packages, and this can
lead to picking up 64-libs for 32-bit builds. To work around this, force
the use of pkg-config only for detecting libcrypto, zlib, jansson and
other package dependencies.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Liron Himi <lironh@marvell.com>
Tested-by: Lee Daly <lee.daly@intel.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Martin Spinler <spinler@cesnet.cz>
The glue libraries are tightly bound to the mlx drivers of a dpdk
version and are packaged with them.
Keeping a separate ABI version prevents us from installing two versions
of dpdk.
Maintaining this separate version just adds confusion.
Align the glue library ABI version to the global ABI version.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The MLX4 library wasn't being successfully initialized with
-Dibverbs_link=dlopen because it expected a shared object file
with a different name.
Fixes: a20b2c01a7 ("build: standardize component names and defines")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Rx RSS hash offload should be controlled by the user
and should not be enforced by RSS multi-queue Rx mode.
Fixes: 8b945a7f7d ("drivers/net: update Rx RSS hash offload capabilities")
Cc: stable@dpdk.org
Author: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
As discussed on the dpdk-dev mailing list[1], we can make some easy
improvements in standardizing the naming of the various components in DPDK,
and their associated feature-enabled macros.
Following this patch, each library will have the name in format,
'librte_<name>.so', and the macro indicating that library is enabled in the
build will have the form 'RTE_LIB_<NAME>'.
Similarly, for libraries, the equivalent name formats and macros are:
'librte_<class>_<name>.so' and 'RTE_<CLASS>_<NAME>', where class is the
device type taken from the relevant driver subdirectory name, i.e. 'net',
'crypto' etc.
To avoid too many changes at once for end applications, the old macro names
will still be provided in the build in this release, but will be removed
subsequently.
[1] http://inbox.dpdk.org/dev/ef7c1a87-79ab-e405-4202-39b7ad6b0c71@solarflare.com/t/#u
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of the time, there is no process-private resource,
so the close operation is just forbidden in a secondary process.
After adding proper check in the port close functions,
some redundant checks in the device remove functions are dropped.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The flag RTE_ETH_DEV_CLOSE_REMOVE is set so all port resources
can be freed by rte_eth_dev_close().
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
RXQ interrupts under Linux are based on the epoll mechanism. An
expected order of operations is as follows:
1. Call rte_eth_dev_rx_intr_enable(), to arm the CQ for receiving events
on data input.
2. Block on rte_epoll_wait() with an array of file descriptors
representing the CQ events. Upon data arrival the kernel will signal an
input event on the corresponding CQ fd.
3. Call rte_eth_dev_rx_intr_disable() after the event was received and
continue in polling mode. The mlx4 implementation of
rte_eth_dev_rx_intr_disable() is to get the CQ event and ack it.
In practice applications may wake up from rte_epoll_wait() due to
timeout with no event to ack but still call
rte_eth_dev_rx_intr_disable() unconditionally. In such cases the call
should return EAGAIN (since the file descriptors are non-blocked), as
opposed to EINVAL which indicates a real failure. In case of EAGAIN the
PMD should not warn on "unable to disable interrupt on rx queue".
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Raslan Darawsheh <rasland@mellanox.com>
The mlx4_pci_probe function sets a pointer to the mlx4_priv structure,
and during that function fills its fields one by one with relevant
values.
It wants to put a value in the intr_handle field that has all its fields
zero except 2. To do so, it initializes a local struct rte_intr_handle
type variable and updates it only 2 fields and assigns it into the
appropriate field. However, it initializes a very large structure on the
stack while not at all certain that this place exists and in any case it
is very wasteful.
Reset all fields directly to the pointer by memset, then format the 2
fields to the relevant values.
Fixes: 63c2f23c85 ("net/mlx4: use a single interrupt handle")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The mlx4_ibv_device_to_pci_addr function defines a variable called ret
inside a loop and uses it.
During the loop, the function assigns a value within the variable and
breaks from the loop, so that this assigning has done nothing and is
actually unnecessary.
Remove the unnecessary assigning.
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx4_pci_probe function defines an struct mlx4dv_ctx_allocators type
variable several hundred rows after it starts, with the only use it
being passed as a parameter to the mlx4_glue->dv_set_context_attr
function.
However, according to DPDK Coding Style Guidelines, variables should be
declared at the start of a block of code rather than in the middle.
Therefore, to improve the Coding Style, the variable is passed directly
to the function without declaring it before.
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The function mlx4_drop_get() creates pointer to a struct mlx4_drop and
if needed allocates by rte_malloc.
If the allocation is failed the function goes to label “error”, and
there does dereference to a null pointer.
Skip resources cleaning when the memory allocation is failed.
Coverity issue: 146206
Coverity issue: 146146
Fixes: d3a7e09234 ("net/mlx4: allocate drop flow resources on demand")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
