Add the support of RTE_FLOW_ITEM_TYPE_SCTP type packet for
ixgbe ntuple filter.
Fixes: 672be56d76 ("net/ixgbe: parse n-tuple filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In case of fiber and link speed set to 1Gb at peer side (with autoneg
or with defined speed), link status could be not properly updated at
time cable is plugged-in.
Indeed if cable was not plugged when device has been configured and
started then link status will not be updated properly with new speed
as no link setup will be triggered.
To avoid this issue, IXGBE_FLAG_NEED_LINK_CONFIG is set to try a link
setup each time link_update() is triggered and current link status is
down. When cable is plugged-in, link setup will be performed via
ixgbe_setup_link().
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Wei Dai <wei.dai@intel.com>
We need to update dev->data->dev_link before handling LSC event.
Otherwise it will still have the initial value after the startup of
the program before interrupt callback was executed.
Fixes: 414b202343 ("bonding: fix initial link status of slave")
Cc: stable@dpdk.org
Signed-off-by: Wei Wang <lnykww@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Document SR-IOV passthrough setup and limitations for enic PMD.
Signed-off-by: John Daley <johndale@cisco.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The type check for flow_type should be IXGBE_ATR_FLOW_TYPE_IPV4
in special card not RTE_ETH_FLOW_NONFRAG_IPV4_OTHER.
Fixes: dc0c16105d ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If segments are used, just mbufs previously linked to head descriptor
of a mbuf chain are released. Other Tx descriptor are used for the
mbuf chain but they keep their linked mbufs without releasing them.
It is not a fatal issue because sooner or later those descriptors will
be head descriptors or just used for a single mbuf packet, then those
linked mbufs will be released.
However, this leads to apps needing bigger mbufs pools and some
confusion about memory requirements. Indeed, because larger pools, some
performance impact could also be expected due to cache misses.
With this patch all Tx descriptors will release linked mbufs inside the
xmit function, and rte_pktmbuf_seg_free is used instead of
rte_pktmbuf_free.
Fixes: 142854c621 ("nfp: fix freeing multi-mbuf packets")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
When an mbuf alloc fails during the mempool get operation for the
i40e bulk alloc receive function, the rx_mbuf_alloc_failed counter
is not incremented to record the error.
This fix ensures consistency with the other i40e receive procedures and
other net drivers.
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Changes included in this fix
- limit CFLAGS to base files
- fix to remove/mark unused members
- add checks for debug config option
- make qede_set_mtu() and qede_udp_dst_port_del() static and others
non-static as appropriate
- move local APIs qede_vlan_offload_set() and qede_rx_cqe_to_pkt_type()
- initialize variables as required
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In SRIOV testing, print adapter info shows firmware version used by PF,
this patch provides fix to populate correct firmware version used by VF.
Fixes: 86a2265e59 ("qede: add SRIOV support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Firmware supports ntuple configuration which is always based on 4-tuples.
So remove RTE_ETH_FLOW_FRAG_IPV4 and RTE_ETH_FLOW_FRAG_IPV6 as valid flows.
Also merge the two switch statements into one.
Fixes: 622075356e ("net/qede: support ntuple and flow director filter")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Use new mbuf flags PKT_RX_VLAN_STRIPPED and PKT_RX_QINQ_STRIPPED
introduced by the patch:
commit b37b528d95 ("mbuf: add new Rx flags for stripped VLAN")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
This defect is a functional issue where the RX CQE pointer remains
uninitialized in the LRO code path which can cause null pointer exception
while accessing VLAN or RSS hash value from CQE.
Coverity issue: 143474
Fixes: 29540be7ef ("net/qede: support LRO/TSO offloads")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
- Add a common routine to handle ETH_RX_CQE_TYPE_TPA_CONT and
ETH_RX_CQE_TYPE_TPA_END.
- Remove enum qede_agg_state since there is no need to maintain
aggregation state.
- Modify the segment chaining logic by tracking head and tail
TPA segments of each aggregation.
- Add more debug and comments.
- Mark the packet as PKT_RX_LRO.
Fixes: 29540be7ef ("net/qede: support LRO/TSO offloads")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Perform reset of the fastpath RX/TX rings after stopping device port and
not while starting the ports.
Fixes: cfe28a9885 ("net/qede: support unequal number of Rx/Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
- In qede_mac_addr_set(), in order to configure default MAC address we
first delete the existing MAC address before trying to add new one. During
init time, there is no MAC filter to begin with, so trying to remove a
non-existing MAC address causes a firmware exception. This can be prevented
by internally calling qede_mac_addr_add() which has the checks in place to
delete a MAC address only if it was added before.
- Remove setting of the default MAC address from within
qede_dev_configure() since rte_eth_dev_start() calls mac_addr_set() anyway.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Only masked bits must be set in Verbs specification for a rule to be valid.
Fixes: 2097d0d1e2 ("net/mlx5: support basic flow items and actions")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Testpmd failed to start when CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC
is disabled, the root cause is the length of sw_ring and queue are
incorrect with the above configuration.
Fixes: 0be2953129 ("net/i40e: fix compile error")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Recently link status change interrupt was enabled by default in testpmd,
it has opened the driver bug with not working LSC interrupt if either
igb_uio or uio_pci_generic kernel driver is used.
Fixes: 06bc197796 ("net/sfc: interrupts support sufficient for event queue init")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Previous too pessimistic estimation made completely impossible to send
packets with many segments (more than 100 with minimum Tx ring size).
Fixes: 8b00f426eb ("net/sfc: implement EF10 native Tx datapath")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
When Receive Side Coalescing (RSC) is not used, the RSC Disable
(RSC_DIS) filed of register Receive Filter Control Register (RFCTL)
should be set according to ixgbe datasheet.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Acquire PHY semaphore before device reset
* Add support for 2.5G KX physical layer
* Add MAC X550em/X557 LED on|off support
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates ixgbe_led_[on|off]_t_X550em for MAC or PHY connected
LEDs. To support both MAC or PHY connected LEDs, both MAC and PHY led
control registers are configured.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Add another define for the 2.5G KX physical layer. This requires all
variables and support functions that deal with "physical_layer" to be
bumped to u64 as this is the 33rd define.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
A recent firmware change fixed an issue to acquire the PHY semaphore
before accessing PHY registers. This led to a case where SW can issue
a device reset clearing the MDIO registers. This patch makes SW acquire
the PHY semaphore before issuing a device reset.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
The hugepage memory limitation of 32 bit application is
"1GB size" but not "1GB per page size".
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When parsing a CLI, all the CLI instances are checked
one by one. Even if an instance already matches the CLI,
the parsing will not stop for ambiguous check.
The problem is that the following check may change the
parsing result of the previous one even if the following
instance doesn't match.
Use a temporary validate for the parsing result when
trying to match an instance and only store the result
when it matches, so the previous result has no chance
to be changed.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit addresses the following errors:
In file included from build/include/rte_latencystats.h:43:0,
from /tmp/check-includes.sh.6580.c:1:
build/include/rte_metrics.h:91:2: error: unknown type name 'uint16_t'
[...]
In file included from /tmp/check-includes.sh.6580.c:1:0:
build/include/rte_latencystats.h:66:19: error: expected declaration
specifiers or '...' before '*' token
[...]
Fixes: 5cd3cac9ed ("latency: added new library for latency stats")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses the following error:
In file included from /tmp/check-includes.sh.28023.c:1:0:
build/include/rte_bitrate.h:82:2: error: unknown type name 'uint8_t'
[...]
It also adds C++ awareness to rte_bitrate.h.
Fixes: 2ad7ba9a65 ("bitrate: add bitrate statistics library")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This commit addresses the following compilation errors:
In file included from /tmp/check-includes.sh.21060.c:1:0:
build/include/rte_metrics.h:91:2: error: unknown type name 'uint16_t'
[...]
It also adds C++ awareness to rte_metrics.h.
Fixes: 349950ddb9 ("metrics: add information metrics library")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This commit addresses the following compilation errors:
In file included from /tmp/check-includes.sh.8373.c:1:0:
build/include/rte_efd.h:133:9: error: unknown type name 'uint8_t'
[...]
Fixes: 56b6ef874f ("efd: new Elastic Flow Distributor library")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Exported headers must allow compilation with the strictest flags. This
commit addresses the following errors:
In file included from build/include/rte_eventdev_pmd.h:55:0,
from /tmp/check-includes.sh.25816.c:1:
build/include/rte_eventdev.h:908:8: error: struct has no named members
[-Werror=pedantic]
[...]
In file included from /tmp/check-includes.sh.25816.c:1:0:
build/include/rte_eventdev_pmd.h:65:35: error: ISO C does not permit named
variadic macros [-Werror=variadic-macros]
[...]
Fixes: 71f2384328 ("eventdev: introduce event driven programming model")
Fixes: 4f0804bbdf ("eventdev: implement the northbound APIs")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit addresses the following compilation errors:
In file included from build/include/rte_cryptodev_scheduler.h:37:0,
from /tmp/check-includes.sh.5355.c:1:
build/include/rte_cryptodev_scheduler_operations.h:43:30: error: unknown
type name 'uint8_t' struct rte_cryptodev *dev, uint8_t slave_id);
[...]
Fixes: 097ab0bac0 ("crypto/scheduler: add API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Exported headers must allow compilation with the strictest flags. This
commit addresses the following errors:
In file included from /tmp/check-includes.sh.20132.c:1:0:
build/include/rte_vhost.h:73:30: error: ISO C forbids zero-size array
'regions' [-Werror=pedantic]
[...]
Also:
- Add C++ awareness to rte_vhost.h for consistency with rte_eth_vhost.h.
- Move Linux includes into C++ block to prevent linking issues with
exported symbols.
- Update check-includes.sh following the removal of rte_virtio_net.h.
Finally, update check-includes.sh to ignore rte_vhost.h and rte_eth_vhost.h
from now on since the Linux headers they depend on are not clean enough:
In file included from /usr/include/linux/vhost.h:17:0,
from build/include/rte_vhost.h:43,
from build/include/rte_eth_vhost.h:44,
from /tmp/check-includes.sh.20132.c:1:
/usr/include/linux/virtio_ring.h: In function 'vring_init':
/usr/include/linux/virtio_ring.h:146:16: error: pointer of type 'void *'
used in arithmetic [-Werror=pointer-arith]
[...]
In file included from build/include/rte_vhost.h:43:0,
from build/include/rte_eth_vhost.h:44,
from /tmp/check-includes.sh.20132.c:1:
/usr/include/linux/vhost.h: At top level:
/usr/include/linux/vhost.h:73:3: error: ISO C99 doesn't support unnamed
structs/unions [-Werror=pedantic]
[...]
Fixes: eb32247457 ("vhost: export guest memory regions")
Fixes: a798beb47c ("vhost: rename header file")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This commit addresses several errors related to missing includes such as:
In file included from /tmp/check-includes.sh.15315.c:1:0:
build/include/rte_avp_fifo.h:77:22: error: 'struct rte_avp_fifo' declared
inside parameter list [-Werror]
[...]
build/include/rte_avp_fifo.h: In function 'avp_fifo_init':
build/include/rte_avp_fifo.h:81:3: error: implicit declaration of function
'rte_panic' [-Werror=implicit-function-declaration]
[...]
build/include/rte_avp_fifo.h:83:6: error: dereferencing pointer to
incomplete type
[...]
build/include/rte_avp_fifo.h:109:2: error: implicit declaration of
function 'rte_wmb' [-Werror=implicit-function-declaration]
[...]
In file included from /tmp/check-includes.sh.15315.c:1:0:
build/include/rte_avp_common.h:104:2: error: unknown type name 'uint64_t'
[...]
build/include/rte_avp_common.h:386:15: error: 'ETHER_ADDR_LEN' undeclared
here (not in a function)
[...]
It addresses errors with strict compilation flags:
In file included from /tmp/check-includes.sh.15315.c:1:0:
build/include/rte_avp_common.h:122:3: error: ISO C99 doesn't support
unnamed structs/unions [-Werror=pedantic]
[...]
build/include/rte_avp_common.h:136:17: error: ISO C forbids zero-size
array 'buffer' [-Werror=pedantic]
[...]
And also adds C++ awareness to both header files.
Fixes: 8e680655e2 ("net/avp: add public header files")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
E-Tag and NVGRE pattern items have been added hastily without updating
documentation nor testpmd.
This commit also adds default masks for these items based on the ixgbe
implementation.
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit addresses the following compilation errors:
In file included from build/include/rte_flow_driver.h:50:0,
from /tmp/check-includes.sh.1397.cc:1:
build/include/rte_flow.h:428:2: error: expected primary-expression before
'.' token
[...]
build/include/rte_flow.h:469:1: sorry, unimplemented: non-trivial
designated initializers not supported
[...]
In file included from build/include/rte_flow_driver.h:50:0,
from /tmp/check-includes.sh.1397.cc:1:
build/include/rte_flow.h:631:1: error: C99 designator 'label_tc_s' outside
aggregate initializer
[...]
build/include/rte_flow.h:631:1: error: initializer-string for array of
chars is too long [-fpermissive]
[...]
build/include/rte_flow.h:650:1: sorry, unimplemented: non-trivial
designated initializers not supported
[...]
C++ does not support the C99-style designated initializers used in this
file for the default item masks. While the resulting symbols are primarily
useful to PMDs (written in C), they are exposed as part of the public API
for documentation purposes and to assist application writers.
Considering that:
- using pre-C99 initialization style for compatibility with C++ would
render them difficult to understand (all struct members must be
initialized)
- using both initialization styles would be needlessly verbose
- not exposing them at all would defeat their purpose
- applications do not normally need these symbols at run time
This commit hides these symbols from C++ applications. Specific C++
initializers will be added later if necessary.
Fixes: 6de5c0f130 ("ethdev: define default item masks in flow API")
Fixes: 7cd048321d ("ethdev: add MPLS and GRE flow API items")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This commit addresses the following errors:
In file included from /tmp/check-includes.sh.18889.c:1:0:
build/include/rte_net_crc.h:86:1: error: unknown type name 'uint32_t'
[...]
Fixes: 986ff526fb ("net: add CRC computation API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This commit addresses the following errors:
In file included from /tmp/check-includes.sh.681.c:1:0:
build/include/rte_mbuf_ptype.h:587:35: error: unknown type name 'uint32_t'
[...]
build/include/rte_mbuf_ptype.h:662:51: error: unknown type name 'size_t'
[...]
Fixes: 288541c8ff ("mbuf: add functions to dump packet type")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
