Increase number of cryptodev queue pair descriptors by default. Current
size of 128 descriptors does not satisfying minimal requirements of crypto
drivers.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Crypto operation allocation may fail in case when total size of queue
pairs are bigger than the pool size.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Used the new API rte_cryptodev_set_session_event_mdata to set
event crypto metadata from the applications (app/test and
app/test-eventdev) instead of using session userdata.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Quiesce event ports used by the workers core on exit to free up
any outstanding resources.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Event ports are configured to implicitly release the scheduler contexts
currently held in the next call to rte_event_dequeue_burst().
A worker core might still hold a scheduling context during exit, as the
next call to rte_event_dequeue_burst() is never made.
This might lead to deadlock based on the worker exit timing and when
there are very less number of flows.
Add clean up function to release any scheduling contexts held by the
worker by using RTE_EVENT_OP_RELEASE.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Remove rte_*_dev calls from signal handler callback as signal handlers
are supposed to be light weight.
Split ethdev teardown into Rx and Tx sections, wait for
workers to finish processing after disabling Rx to allow workers
to complete processing currently held packets.
Verified SW event device on ARM64 using the following command:
./build/app/dpdk-test-eventdev -l 7-23 -s 0xf00 --vdev=event_sw0
-a 0002:02:00.0 -- --prod_type_ethdev --nb_pkts=0 --verbose 2
--test=pipeline_queue --stlist=o --wlcores 16-23
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In crypto producer mode, producer core enqueues cryptodev with software
generated crypto ops and worker core dequeues crypto completion events
from the eventdev. Event crypto metadata used for above processing is
pre-populated in each crypto session.
Parameter --prod_type_cryptodev can be used to enable crypto producer
mode. Parameter --crypto_adptr_mode can be set to select the crypto
adapter mode, 0 for OP_NEW and 1 for OP_FORWARD.
This mode can be used to measure the performance of crypto adapter.
Example:
./dpdk-test-eventdev -l 0-2 -w <EVENTDEV> -w <CRYPTODEV> -- \
--prod_type_cryptodev --crypto_adptr_mode 1 --test=perf_atq \
--stlist=a --wlcores 1 --plcores 2
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
This commit adds producer, worker and consumer port hints for the
test-eventdev application performance tests.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Introduce a new command line option prod_enq_burst_sz
to set burst size for eventdev enqueue at producer in perf_queue
test. The newly added function perf_producer_burst is called when
prod_enq_burst_sz is greater than 1.
Signed-off-by: Rashmi Shetty <rashmi.shetty@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before this commit, a Control^C exit of the test-eventdev application
would print the worker packet percentages, and leave the terminal with
a green colour despite the colour reset being issued after the newline.
By moving the colour reset command before the \n the issue is fixed.
Fixes: 6b1a14a83a06 ("app/eventdev: add packet distribution logs")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Round timeout ticks when converting from nanoseconds, this prevents
loss of accuracy and deviation from requested timeout value.
Fixes: d008f20bce23 ("app/eventdev: add event timer adapter as a producer")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
For "processed_pkts" and "total_latency" functions, no operations should
keep the order that being executed before loading
"worker[i].processed_pkts". Thus rmb is unnecessary before loading.
For "perf_launch_lcores" function, wmb after that the main lcore
updates the variable "t->done", which represents the end of the test
signal, is unnecessary. Because after the main lcore updates this
siginal variable, it will jump out of the launch function loop, and wait
other lcores stop or return error in the main function(evt_main.c).
During this time, there is no important storing operation and thus no
need for wmb.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘service_id’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
ret = evt_service_setup(service_id);
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across apps according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to int, so
this patch modify rte_eth_dev_info_get() usage across apps
according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When using synthetic and timer event producer reduce the calls made to
mempool library by using get_bulk() instead of get().
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When producer type is event timer adapter producer lcore checks are
skipped. Since, timer adapter relies on SW to arm timers producer lcore
is essential for its functionality.
Verify producer lcore validity when producer type is event timer
adapter.
Fixes: b01974da9f25 ("app/eventdev: add ethernet device producer option")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Start event producers after eventdev i.e. consumer is started as in some
architectures it might lead to undefined behaviour or events being
dropped.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Previously, the total number of event timers per adapter was set to an
arbitrary value, set it to mempool size instead as it defines the max
event timers that can be armed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
If timer events get dropped for some reason, the thread that launched
producer and worker cores will never exit, because the deadlock check
doesn't currently apply to the event timer adapter case. This commit
fixes this.
Fixes: d008f20bce23 ("app/eventdev: add event timer adapter as a producer")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Use proper teardown sequence when SIGINT is caught to prevent
eventdev from going into undefined state.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f15d ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Some test applications and examples were not converted
to the new offload API introduced in 17.11.
For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
test_perf_common.c: In function ‘perf_event_timer_producer’:
test_perf_common.c:99:3: error: missing initializer for
field ‘priority’ of ‘struct <anonymous>’
[-Werror=missing-field-initializers]
.ev.sched_type = t->opt->sched_type_list[0],
Fixes: d008f20bce23 ("app/eventdev: add event timer adapter as a producer")
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add burst mode for event timer adapter that can be selected by passing
--prod_type_timerdev_burst.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add event timer adapter as producer option that can be selected by
passing --prod_type_timerdev.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The port dequeue depth value has to be compared against the maximum
allowed dequeue depth reported by the event drivers.
Fixes: 3617aae53f92 ("app/eventdev: add event Rx adapter setup")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add logs for packet distribution across worker cores to be printed
along with the test results.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add service core configuration for Rx adapter. The configuration picks
the least used service core to run the service on.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Add functions to setup and configure Rx adapter based on the number of
ethdev ports setup.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add ethernet device destroy functions to stop and close ethdev ports
if they are configured when prod_type_ethdev option is enabled.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add pktmbuf pool creation used when configuring ethernet device as event
producer.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Modify app setup to accommodate event port and queue setup based on the
number of ethernet ports.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add command line option --prod_type_ethdev to specify that the events
are generated by ethernet device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Use service cores for offloading event scheduling in case of
centralized scheduling instead of calling the schedule api directly.
This removes the dependency on dedicated scheduler core specified by
giving command line option --slcore.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
pkts == 0 will result in divide by zero case.
Added a check to fix it.
Coverity issue: 158652
Fixes: 9d3aeb185eb4 ("app/testeventdev: launch perf lcores")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The event producer and master lcore's test termination and
the logic to print the mpps and latency are common for the
queue and all types queue test.
Move them as the common function.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Setup one port per worker and link to all queues and setup
N producer ports to inject the events.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
