Add support for crc offload and l3/l4 checksum offloads.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Return supported link speed capabilities via rte_dev_info_get().
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add support for retrieving physical link information i.e:
speed, duplex and link status.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add mrvl net pmd driver skeleton providing base for the further
development. Besides the basic functionality QoS configuration is
introduced as well.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Support same functionalities as in
commit cf521eaa3c76 ("net/mlx5: remove flow director support")
This implementation is done on top of the generic flow API.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Generic flow API should be use for flow steering as is provides a better
and easier way to configure flows.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Mark packet type parsing in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark "Queue start/stop" as P as its been implemented only for tx queue.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Implement "mac_addr_set" op and mark "Unicast MAC filter" feature as "P"
as "mac_addr_add" and "mac_addr_remove" are not implemented.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Basic stats support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Promiscuous mode in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Mark Link status in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
mark Jumbo frame, CRC offload support in features.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Add programmer's guide doc to explain the design and use of the
GSO library.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support to the csum forwarding engine. Oversized
packets transmitted over a GSO-enabled port will undergo segmentation
(with the exception of packet-types unsupported by the GSO library).
GSO support is disabled by default.
GSO support may be toggled on a per-port basis, using the command:
"set port <port_id> gso on|off"
The maximum packet length (including the packet header and payload) for
GSO segments may be set with the command:
"set gso segsz <length>"
Show GSO configuration for a given port with the command:
"show port <port_id> gso"
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support for GRE-tunneled packets. Supported GRE
packets must contain an outer IPv4 header, and inner TCP/IPv4 headers.
They may also contain a single VLAN tag. GRE GSO doesn't check if all
input packets have correct checksums and doesn't update checksums for
output packets. Additionally, it doesn't process IP fragmented packets.
As with VxLAN GSO, GRE GSO uses a two-segment MBUF to organize each
output packet, which requires multi-segment mbuf support in the TX
functions of the NIC driver. Also, if a packet is GSOed, GRE GSO reduces
its MBUF refcnt by 1. As a result, when all of its GSOed segments are
freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a framework that allows GSO on tunneled packets.
Furthermore, it leverages that framework to provide GSO support for
VxLAN-encapsulated packets.
Supported VxLAN packets must have an outer IPv4 header (prepended by an
optional VLAN tag), and contain an inner TCP/IPv4 packet (with an optional
inner VLAN tag).
VxLAN GSO doesn't check if input packets have correct checksums and
doesn't update checksums for output packets. Additionally, it doesn't
process IP fragmented packets.
As with TCP/IPv4 GSO, VxLAN GSO uses a two-segment MBUF to organize each
output packet, which mandates support for multi-segment mbufs in the TX
functions of the NIC driver. Also, if a packet is GSOed, VxLAN GSO
reduces its MBUF refcnt by 1. As a result, when all of its GSO'd segments
are freed, the packet is freed automatically.
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds GSO support for TCP/IPv4 packets. Supported packets
may include a single VLAN tag. TCP/IPv4 GSO doesn't check if input
packets have correct checksums, and doesn't update checksums for
output packets (the responsibility for this lies with the application).
Additionally, TCP/IPv4 GSO doesn't process IP fragmented packets.
TCP/IPv4 GSO uses two chained MBUFs, one direct MBUF and one indrect
MBUF, to organize an output packet. Note that we refer to these two
chained MBUFs as a two-segment MBUF. The direct MBUF stores the packet
header, while the indirect mbuf simply points to a location within the
original packet's payload. Consequently, use of the GSO library requires
multi-segment MBUF support in the TX functions of the NIC driver.
If a packet is GSO'd, TCP/IPv4 GSO reduces its MBUF refcnt by 1. As a
result, when all of its GSOed segments are freed, the packet is freed
automatically.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GRO library provides two modes to reassemble packets. Currently, the
csum forwarding engine has supported to use the lightweight mode to
reassemble TCP/IPv4 packets. This patch introduces the heavyweight mode
for TCP/IPv4 GRO in the csum forwarding engine.
With the command "set port <port_id> gro on|off", users can enable
TCP/IPv4 GRO for a given port. With the command "set gro flush <cycles>",
users can determine when the GROed TCP/IPv4 packets are flushed from
reassembly tables. With the command "show port <port_id> gro", users can
display GRO configuration.
The GRO library doesn't re-calculate checksums for merged packets. If
users want the merged packets to have correct IP and TCP checksums,
please select HW IP checksum calculation and HW TCP checksum calculation
for the port which the merged packets are transmitted to.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Add operations that are safe for secondary processes:
* (x)stats
* device info get
* rx/tx descriptor status
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add common APIs for configuring packet transfer from ethernet Rx
queues to event devices across HW & SW packet transfer mechanisms.
A detailed description of the adapter is contained in the header's
comments.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit bumps the library version to refect the ABI change
caused by removing the individual rte_event_port_count, queue_count,
and other get functions. These functions are superseded by the
get-attribute style API, which allows fetching values without API/ABI
changes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Added new callbacks to notify about socket connection status.
As destroy_device is used for virtqueue processing *pause* as well as
connection close, the user has no distinction between those.
Consider the following scenario:
rte_vhost: received SET_VRING_BASE message,
calling destroy_device() as usual
user: end-user asks to remove the device (together with socket file),
OK, device is not *in use* - that's NOT the behavior we want
calling rte_vhost_driver_unregister() etc.
Instead of changing new_device/destroy_device callbacks and breaking
the ABI, a set of new functions new_connection/destroy_connection
has been added.
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
As described in API documentation, the field hw_ip_checksum
requests both L3 and L4 offload.
Fixes: dad1ec72a3 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When I was adding mlockall() to the testpmd application it was
suggested to add a reference to the use case of mlockall(). This patch
adds is.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
We remove xen-specific code in EAL, including the option --xen-dom0,
memory initialization code, compiling dependency, etc.
Related documents are removed or updated, and bump the eal library
version.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds the documentation for membership library.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DPDK has support for both sw and hw mempool and
currently user is limited to use ring_mp_mc pool.
In case user want to use other pool handle,
need to update config RTE_MEMPOOL_OPS_DEFAULT, then
build and run with desired pool handle.
Introducing eal option to override default pool handle.
Now user can override the RTE_MEMPOOL_OPS_DEFAULT by passing
pool handle to eal `--mbuf-pool-ops-name=""`.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new commands to manipulate with dynamic flow type to
pctype mapping table in i40e PMD.
Commands allow to print table, modify it and reset to default value.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
