Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch implements the changes proposed in the deprecation
note[1]. Replace multiple color definitions in various places such as
rte_meter.h, rte_tm.h and rte_mtr.h with single rte_color defined
in rte_meter.h.
This is simple search and replace exercise without any implementation
change.
[1] https://mails.dpdk.org/archives/dev/2019-January/123861.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch implements the changes proposed in the deprecation
notes [1][2].
librte_mbuf changes:
The mbuf->hash.sched field is updated to support generic
definition in line with the ethdev traffic manager and meter APIs.
The new generic format contains: queue ID, traffic class, color.
Added public APIs to set and get these new fields to and from mbuf.
librte_sched changes:
In addtion, following API functions of the sched library have
been modified with an additional parameter of type struct
rte_sched_port to accommodate the changes made to mbuf sched field.
(i)rte_sched_port_pkt_write()
(ii) rte_sched_port_pkt_read_tree_path()
librte_pipeline, qos_sched UT, qos_sched app are updated
to make use of new changes.
Also mbuf->hash.txadapter has been added for eventdev txq,
rte_event_eth_tx_adapter_txq_set and rte_event_eth_tx_adapter_txq_get()
are updated to use mbuf->hash.txadapter.txq.
doc:
Release notes updated.
Removed deprecation notice for mbuf->hash.sched and sched API.
[1] http://mails.dpdk.org/archives/dev/2018-February/090651.html
[2] https://mails.dpdk.org/archives/dev/2018-November/119051.html
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
This patches fixes the coverity issue of logically dead code.
Coverity issue: 323523
Fixes: 96303217a6 ("pipeline: add symmetric crypto table action")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch introduces a new table action for packet decapsulation
which removes n bytes from the start of the input packet. The n
is read from the current table entry. The following mbuf fields
are updated by the action: data_off, data_len, pkt_len.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch introduces the packet tag table action which attaches
a 32-bit value (the tag) to the current input packet. The tag is
read from the current table entry. The tag is written into the
mbuf->hash.fdir.hi and the flags PKT_RX_FDIR and PKT_RX_FDIR_ID
are set into mbuf->ol_flags.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds the symmetric crypto action support to pipeline
library. The symmetric crypto action works as the shim layer
between pipeline and DPDK cryptodev and is able to interact with
cryptodev with the control path requests such as session
creation/deletion and data path work to assemble the crypto
operations for received packets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add implementation of different type of packet encap
such as vlan, qinq, mpls, pppoe, etc.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add API to specify action related parameters such as action
handler, table entry data size, etc. for the pipeline table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This API provides a common set of actions for pipeline tables to speed up
application development.
Each match-action rule added to a pipeline table has associated data
that stores the action context. This data is input to the table
action handler called for every input packet that hits the rule as
part of the table lookup during the pipeline execution.
The pipeline library allows the user to define his own table
actions by providing customized table action handlers (table
lookup) and complete freedom of setting the rules and their data
(table rule add/delete). While the user can still follow this
process, this API is intended to provide a quicker development
alternative for a set of predefined actions.
The typical steps to use this API are:
* Define a table action profile.
* Instantiate the table action profile to create table action objects.
* Use the table action object to generate the pipeline table action
handlers (invoked by the pipeline table lookup operation).
* Use the table action object to generate the rule data (for the
pipeline table rule add operation) based on given action parameters.
* Use the table action object to read action data (e.g. stats counters)
for any given rule.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
