We will be assigning "invalid" socket ID's to external heap, and
malloc will now be able to verify if a supplied socket ID is in
fact a valid one, rendering parameter checks for sockets
obsolete.
This changes the semantics of what we understand by "socket ID",
so document the change in the release notes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Switch over all parts of EAL to use heap ID instead of NUMA node
ID to identify heaps. Heap ID for DPDK-internal heaps is NUMA
node's index within the detected NUMA node list. Heap ID for
external heaps will be order of their creation.
This breaks the ABI, so document the changes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we allocate and use DPDK memory, we need to be able to
differentiate between DPDK hugepage segments and segments that
were made part of DPDK but are externally allocated. Add such
a property to memseg lists.
This breaks the ABI, so document the change in release notes.
This also breaks a few internal assumptions about memory
contiguousness, so adjust malloc code in a few places.
All current calls for memseg walk functions were adjusted to
ignore external segments where it made sense.
Mempools is a special case, because we may be asked to allocate
a mempool on a specific socket, and we need to ignore all page
sizes on other heaps or other sockets. Previously, this
assumption of knowing all page sizes was not a problem, but it
will be now, so we have to match socket ID with page size when
calculating minimum page size for a mempool.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Previously, to calculate length of memory area covered by a memseg
list, we would've needed to multiply page size by length of fbarray
backing that memseg list. This is not obvious and unnecessarily
low level, so store length in the memseg list itself.
This breaks ABI, so bump the EAL ABI version and document the
change. Also, while we're breaking ABI, pack the members a little
better.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
build error:
.../lib/librte_eventdev/rte_event_eth_tx_adapter.c:
In function ‘txa_service_queue_del’:
.../lib/librte_eventdev/rte_event_eth_tx_adapter.c:800:7:
error: ‘ret’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
compilation terminated due to -Wfatal-errors.
https://mails.dpdk.org/archives/test-report/2018-October/065919.html
'ret' may be used uninitialized when 'dev->data->nb_tx_queues' is 0,
although this is not a practical value, initialize 'ret' to cover this
case.
Fixes: a3bbf2e097 ("eventdev: add eth Tx adapter implementation")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, DPDK will skip mapping some areas (or even an entire BAR)
if MSI-X table happens to be in them but is smaller than page size.
Kernels 4.16+ will allow mapping MSI-X BARs [1], and will report this
as a capability flag. Capability flags themselves are also only
supported since kernel 4.6 [2].
This commit will introduce support for checking VFIO capabilities,
and will use it to check if we are allowed to map BARs with MSI-X
tables in them, along with backwards compatibility for older
kernels, including a workaround for a variable rename in VFIO
region info structure [3].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
linux.git/commit/?id=a32295c612c57990d17fb0f41e7134394b2f35f6
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
linux.git/commit/?id=c84982adb23bcf3b99b79ca33527cd2625fbe279
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
linux.git/commit/?id=ff63eb638d63b95e489f976428f1df01391e15e4
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When NUMA-aware hugepages config option is set, we rely on
libnuma to tell the kernel to allocate hugepages on a specific
NUMA node. However, we allocate node mask before we check if
NUMA is available in the first place, which, according to
the manpage [1], causes undefined behaviour.
Fix by only using nodemask when we have NUMA available.
[1] https://linux.die.net/man/3/numa_alloc_onnode
Bugzilla ID: 20
Fixes: 1b72605d24 ("mem: balanced allocation of hugepages")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Currently, command-line switches for legacy mem mode or single-file
segments mode are only stored in internal config. This leads to a
situation where these flags have to always match between primary
and secondary, which is bad for usability.
Fix this by storing these flags in the shared config as well, so
that secondary process can know if the primary was launched in
single-file segments or legacy mem mode.
This bumps the EAL ABI, however there's an EAL deprecation notice
already in place[1] for a different feature, so that's OK.
[1] http://patches.dpdk.org/patch/43502/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Implement the operators of an rte_class for the
ethdev abstraction layer.
Register the layer as such.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This iterator can be customized with a comparison function that will
trigger a stopping condition.
It can be leveraged to write several different iterators that have
similar but non-identical purposes.
It is private to librte_ethdev.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Long time ago preallocation of memory for KNI was introduced in commit
0c6bc8e. It was done because of lack of ability to free previously
allocated memzones, which led to memzone exhaustion. Currently memzones
can be freed and this patch uses this ability for dynamic KNI memory
allocation.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make the ethernet port id passed into
rte_event_eth_rx_adapter_caps_get() 16 bit.
Also, update the event rx adapter test to use 16 bit
ethernet port ids.
Fixes: c2189c907d ("eventdev: make ethdev port identifiers 16-bit")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch implements the Tx adapter APIs by invoking the
corresponding eventdev PMD callbacks and also provides
the common rte_service function based implementation when
the eventdev PMD support is absent.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
The caps API allows the application to query if the transmit
stage is implemented in the eventdev PMD or uses the common
rte_service function. The PMD callbacks support the
eventdev PMD implementation of the adapter.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The ethernet Tx adapter abstracts the transmit stage of an
event driven packet processing application. The transmit
stage may be implemented with eventdev PMD support or use a
rte_service function implemented in the adapter. These APIs
provide a common configuration and control interface and
an transmit API for the eventdev PMD implementation.
The transmit port is specified using mbuf::port. The transmit
queue is specified using the rte_event_eth_tx_adapter_txq_set()
function.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit introduces a new function in the eventdev API,
which allows applications to read the number of unlink requests
in progress on a particular port of an eventdev instance.
This information allows applications to verify when no more packets
from a particular queue (or any queue) will arrive at a port.
The application could decide to stop polling, or put the core into
a sleep state if it wishes, as it is ensured that no new packets
will arrive at a particular port anymore if all queues are unlinked.
Suggested-by: Matias Elo <matias.elo@nokia.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Use RTE_MAX_ETHPORTS instead of rte_eth_dev_count_total()
when allocating eth Rx adapter's per-eth device data structure
to account for hotplugged devices.
Fixes: 9c38b704d2 ("eventdev: add eth Rx adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When performing enqueue operations on the split and packed rings,
if the reserved buffer length from the descriptor table exceeds
65535, the returned length by fill_vec_buf_split/_packed()
overflows. This patch is to avoid this corner case.
Fixes: f689586bc0 ("vhost: shadow used ring update")
Fixes: fd68b4739d ("vhost: use buffer vectors in dequeue path")
Fixes: 2f3225a7d6 ("vhost: add vector filling support for packed ring")
Fixes: 37f5e79a27 ("vhost: add shadow used ring support for packed rings")
Fixes: a922401f35 ("vhost: add Rx support for packed ring")
Fixes: ae999ce49d ("vhost: add Tx support for packed ring")
Cc: stable@dpdk.org
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Introduce vhost_message_handlers, which maps the message request
type to the message handler. Then replace the switch construct
with a map and call.
Failing vhost_user_set_features is fatal and all processing should
stop immediately and propagate the error to the upper layers. Change
the code accordingly to reflect that.
Signed-off-by: Nikolay Nikolaev <nicknickolaev@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Each vhost-user message handling function will return an int result
which is described in the new enum vh_result: error, OK and reply.
All functions will now have two arguments, virtio_net double pointer
and VhostUserMsg pointer.
Signed-off-by: Nikolay Nikolaev <nicknickolaev@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
As VhostUserMsg structure is reused to generate the reply, move the
relevant fields update into the respective message handling functions.
Signed-off-by: Nikolay Nikolaev <nicknickolaev@gmail.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Do not use the typedef version of struct VhostUserMsg. Also unify the
related parameter name.
Signed-off-by: Nikolay Nikolaev <nicknickolaev@gmail.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The doxygen comment describing the rte_eth_dev_info structure
was separated from the structure itself so move the comment
back to be with the structure.
Fixes: 7238e63bce ("ethdev: add support for device offload capabilities")
Cc: stable@dpdk.org
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch fixes how function exit is handled when errors inside
rte_eth_dev_create.
Fixes: e489007a41 ("ethdev: add generic create/destroy ethdev APIs")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Current Intel tx prepare function does not properly handle the
case where only IP checksum is requested, without requesting
any L4 checksum or TSO: IP checksum is not properly reset to 0
and output packet may contain invalid IP checksum.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When compiling on FreeBSD, lots of warnings/errors are thrown for
unused parameter. Fix these by marking the parameters as unused
in the code.
Fixes: 1009ba1704 ("mem: add internal API to get and set segment fd")
Fixes: 3a44687139 ("mem: allow querying offset into segment fd")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
A fragmented packets is supposed to live no longer than max_cycles,
but the lib deletes an expired packet only occasionally when it scans
a bucket to find an empty slot while adding a new packet.
Therefore a fragment might sit in the table forever.
Signed-off-by: Alex Kiselev <alex@therouter.net>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rework the delete function and add additional
internal data structures to support incremental
LPM tree update rather than full tree rebuild.
Signed-off-by: Alex Kiselev <alex@therouter.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rework the lpm6 rule subsystem and replace
current rules algorithm complexity O(n)
with hashtables which allow dealing with
large (50k) rule sets.
Signed-off-by: Alex Kiselev <alex@therouter.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Enable using memfd-created segments if supported by the system.
This will allow having real fd's for pages but without hugetlbfs
mounts, which will enable in-memory mode to be used with virtio.
The implementation is mostly piggy-backing on existing real-fd
code, except that we no longer need to unlink any files or track
per-page locks in single-file segments mode, because in-memory
mode does not support secondary processes anyway.
We move some checks from EAL command-line parsing code to memalloc
because it is now possible to use single-file segments mode with
in-memory mode, but only if memfd is supported.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In a few cases, user may need to query offset into fd for a
particular memory segment (for example, to selectively map
pages). This commit adds a new API to do that.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Now that we can retrieve page fd's internally, we can expose it
as an external API. This will add two flavors of API - thread-safe
and non-thread-safe. Fix up internal API's to return values we need
without modifying rte_errno internally if called from within EAL.
We do not want calling code to accidentally close an internal fd, so
we make a duplicate of it before we return it to the user. Caller is
therefore responsible for closing this fd.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Enable setting and retrieving segment fd's internally.
For now, retrieving fd's will not be used anywhere until we
get an external API, but it will be useful for things like
virtio, where we wish to share segment fd's.
Setting segment fd's will not be available as a public API
at this time, but internally it is needed for legacy mode,
because we're not allocating our hugepages in memalloc in
legacy mode case, and we still need to store the fd.
Another user of get segment fd API is memseg info dump, to
show which pages use which fd's.
Not supported on FreeBSD.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Previously, we were only tracking lock file fd's in single-file
segments mode, but did not track fd's in non-single file mode
because we didn't need to (mmap() call still kept the lock). Now
that we are going to expose these fd's to the world, we need to
have access to them, so track them even in non-single file
segments mode.
We don't need to close fd's after mmap() because we're still
tracking them in an fd list. Also, for anonymous hugepages mode,
fd will always be -1 so exit early on error.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Previously, we were only using lock lists to store per-page lock fd's
because we cannot use modern fcntl() file description locks to lock
parts of the page in single file segments mode.
Now, we will be using this list to store either lock fd's (along with
memseg list fd) in single file segments mode, or per-page fd's (and set
memseg list fd to -1), so rename the list accordingly.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Previously, when we allocated hugepages, we closed the fd's corresponding
to them after we've done our mappings. Since we did mmap(), we didn't
actually lose the reference, but file descriptors used for mmap() do not
count against the fd limit. Since we are going to store all of our fd's,
we will hit the fd limit much more often when using smaller page sizes.
Fix this to raise the fd limit to maximum unconditionally.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In-memory mode was never meant to support legacy mode, because we
cannot sort anonymous pages anyway.
Fixes: 72b49ff623 ("mem: support --in-memory mode")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In noshconf mode, no shared files are created, but we're still trying
to unlink them, resulting in detach/destroy failure even though it
should have succeeded. Fix it by exiting early in noshconf mode.
Fixes: 3ee2cde248 ("fbarray: support --no-shconf mode")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The strncpy function has long been deemed unsafe for use,
in favor of strlcpy or snprintf.
While snprintf is standard and strlcpy is still largely available,
they both have issues regarding error checking and performance.
Both will force reading the source buffer past the requested size
if the input is not a proper c-string, and will return the expected
number of bytes copied, meaning that error checking needs to verify
that the number of bytes copied is not superior to the destination
size.
This contributes to awkward code flow, unclear error checking and
potential issues with malformed input.
The function strscpy has been discussed for some time already and
has been made available in the linux kernel[1].
Propose this new function as a safe alternative.
[1]: http://git.kernel.org/linus/30c44659f4a3
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
__rte_mbuf_raw_free and __rte_pktmbuf_prefree_seg have been deprecated for
a long time now (early 17.05), are not part of the abi and are easily
replaced with existing api.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
pdump library now uses generic multi process channel
and it is no more dependent on the pthreads, so remove
the dependency from the Makefile.
Fixes: 660098d61f ("pdump: use generic multi-process channel")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
After running meson to configure a DPDK build, it can be useful to know
what was automatically enabled or disabled. Therefore, print out by way of
summary a categorised list of libraries and drivers to be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
EAL is a standard dependency of all libraries, except for those built
before it. We can therefore simplify the logic by just checking if EAL
has been processed, and make it a standard dependency if so.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This has been only build-tested for now, on a native ppc64el POWER8E
machine running Debian sid.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
They are built by the legacy makefiles but not by Meson.
Fixes: 8f40ee0734 ("eal/x86: get hypervisor name")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Patch 5355f443 added two definitions of DEV_TX_OFFLOAD_xxx.
If new Tx offload capabilities are defined, they also must be mentioned
in rte_tx_offload_names in rte_ethdev.c file.
This patch adds the required lines in array rte_tx_offload_names.
Fixes: 5355f4439e ("ethdev: introduce generic IP/UDP tunnel checksum and TSO")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
