When an indirection table is destroyed, each Rx queue related to it,
should be dereferenced.
The regular queues are indeed dereferenced.
However, the external RxQs are not.
This patch adds dereferencing for external RxQs too.
Fixes: 311b17e669ab ("net/mlx5: support queue/RSS actions for external Rx queue")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When E-Switch mode was enabled, the NIC egress flows was implicitly
appended with source vport to match on. If the metadata register C0
was used to maintain the source vport, it was initialized to zero
on packet steering engine entry, the flow could be hit only
if source vport was zero, the register C0 of the packet was not correct
to match in the TX side, this caused egress flow misses.
This patch:
- removes the implicit source vport match for NIC egress flow.
- rejects the NIC egress flows on the representor ports at validation.
- allows the internal NIC egress flows containing the TX_QUEUE items in
order to not impact hairpins.
Fixes: ce777b147bf8 ("net/mlx5: fix E-Switch flow without port item")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
When both shared and non-shared RSS actions are present in single
flow rule shared RSS index is unset by mistake.
For example:
1. flow indirect_action 0 create action_id 3 ingress action RSS ...
2. set sample_actions 0 mark id 43690 / queue index 0 / end
3. flow create 0 ingress group 107 pattern eth / sample ratio 2
index 0 / indirect 3 / end
PMD translates the indirect action to a shared RSS description at first.
In the split prefix flow, RSS->shared_RSS is unset when translating
sample queue action, the subfix flow will treat the RSS as non-shared.
Fixes: 8e61555657b2 ("net/mlx5: fix shared RSS and mark actions combination")
Cc: stable@dpdk.org
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
RSS expansion scheme has 2 operational modes: default and specific.
The default mode expands into all valid options for a given network
layer. For example, Ethernet expands by default into VLAN, IPv4 and
IPv6, L3 expands into TCP and UDP, etc.
The specific mode expands according to flow item next protocol
configuration provided by the item spec and mask parameters.
There are 3 outcomes for the specific expansion:
1. Back to default – that is the case when result of (spec & mask)
allows all possibilities.
For example: eth type mask 0 type spec 0
2. No results – in that case item configuration has no valid expansion.
For example: eth type mask 0xffff type spec 101
3. Direct - In that case flow item mask and spec configuration return
valid expansion option.
Example: eth type mask 0x0fff type spec 0x0800.
Current PMD expands flow items with explicit spec and mask
configuration into the Direct(3) or No results (2). Default expansions
were handled as No results.
Fixes: f3f1f576f438 ("net/mlx5: fix RSS expansion with explicit next protocol")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In tf_session_create(), there is a case that with 'tfp->session' still
be NULL and run 'goto cleanup', which will leads to a null dereference
by 'tfp_free(tfp->session->core_data)' in the cleanup.
Fixes: a46bbb57605b ("net/bnxt: update multi device design")
Cc: stable@dpdk.org
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In some environments, the check of local symbols catch-all
was failing. Note: this script is called during the build.
The reason is that grep returns an error if nothing is found.
The option -e of the shell script makes this error fatal.
It is not always fatal because the grep is in a command substitution.
Fixes: b403498e1422 ("build: hide local symbols in shared libraries")
Reported-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
API documentation for "struct rte_eth_dev_info" was missing some fields
'device' & 'max_hash_mac_addrs',
because of syntax error in doxygen comment, fixing it.
Bugzilla ID: 954
Fixes: 88ac4396ad29 ("ethdev: add VMDq support")
Fixes: cd8c7c7ce241 ("ethdev: replace bus specific struct with generic dev")
Cc: stable@dpdk.org
Reported-by: Bruce Merry <bmerry@sarao.ac.za>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
When building with Meson 0.61.1 on FreeBSD some archives become
corrupted. This can be avoided by using 'llvm-ar' instead of 'ar'.
Cc: stable@dpdk.org
Signed-off-by: Karl Bonde Torp <k.torp@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Following a rework, external message handlers were receiving a pointer
to a vhost_user message (as stated in the API), but lost the ability to
interact with fds attached to the message.
Restore the original layout and put a build check and reminders.
Bugzilla ID: 953
Fixes: 5e0099dc709e ("vhost: remove payload size limitation")
Reported-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Jakub Poczatek <jakub.poczatek@intel.com>
Acked-by: Jakub Poczatek <jakub.poczatek@intel.com>
Reviewed-by: Christophe Fontaine <cfontain@redhat.com>
The symbols which are not listed in the version script
are exported by default.
Adding a local section with a wildcard make non-listed functions
and variables as hidden, as it should be in all version.map files.
These are the changes done in the shared libraries:
- DF .text Base auxiliary_add_device
- DF .text Base auxiliary_dev_exists
- DF .text Base auxiliary_dev_iterate
- DF .text Base auxiliary_insert_device
- DF .text Base auxiliary_is_ignored_device
- DF .text Base auxiliary_match
- DF .text Base auxiliary_on_scan
- DF .text Base auxiliary_scan
- DO .bss Base auxiliary_bus_logtype
- DO .data Base auxiliary_bus
- DO .bss Base gpu_logtype
There is no impact on regexdev library.
Because these local symbols were exported as non-internal
in DPDK 21.11, any change in these functions would break the ABI.
Exception rules are added for these experimental libraries,
so the ABI check will skip them until the next ABI version.
A check is added to avoid such miss in future.
Fixes: 1afce3086cf4 ("bus/auxiliary: introduce auxiliary bus")
Fixes: 8b8036a66e3d ("gpudev: introduce GPU device class library")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The functions used by the drivers must be internal,
while the function and variables used in inline functions
must be experimental.
These are the changes done in the shared library:
- DF .text Base rte_regexdev_get_device_by_name
+ DF .text INTERNAL rte_regexdev_get_device_by_name
- DF .text Base rte_regexdev_register
+ DF .text INTERNAL rte_regexdev_register
- DF .text Base rte_regexdev_unregister
+ DF .text INTERNAL rte_regexdev_unregister
- DF .text Base rte_regexdev_is_valid_dev
+ DF .text EXPERIMENTAL rte_regexdev_is_valid_dev
- DO .bss Base rte_regex_devices
+ DO .bss EXPERIMENTAL rte_regex_devices
- DO .bss Base rte_regexdev_logtype
+ DO .bss EXPERIMENTAL rte_regexdev_logtype
Because these symbols were exported in the default section in DPDK 21.11,
any change in these functions would be seen as incompatible
by the ABI compatibility check.
An exception rule is added for this experimental library,
so the ABI check will skip it until the next ABI version.
Fixes: bab9497ef78b ("regexdev: introduce API")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ori Kam <orika@nvidia.com>
Convert the existing exception in the ABI script into a libabigail
suppression rule.
Note: file_name_regexp could be used to achieve the same with versions of
libabigail < 1.7 but soname_regexp has been preferred here since it is
already used with a recent change on common/mlx5.
While at it, fix indent from a recent change.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The event/dlb driver exception can be removed, as this rule made sense
for changes in DPDK_21 ABI and is obsolete for DPDK_22.
Fixes: fdab8f2e1749 ("version: 21.11-rc0")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Changed the filter from ETH_SPEED to ETH_SPEED_NUM to make the match
more specific. Added check for ETH_TUNNEL_FILTER and ETH_RSS_RETA
as these were missed before.
Signed-off-by: Aman Singh <aman.deep.singh@intel.com>
Add CR character at print link state information.
Fixes: db4e81351fb8 ("examples: use new link status print format")
Cc: stable@dpdk.org
Signed-off-by: Tianli Lai <laitianli@tom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The default values of rx mq_mode and rx offloads for port
will cause symmetric_mp startup failure if the port do not
support rss or csum. This patch makes the app to reconfigure
the NIC without them. Only quit the app if the second
reconfiguration fails.
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Distributor application creates one Tx queue per core. However
the transmit is done only from a single core. Hence creating
one Tx queue is enough.
Fixes: 07db4a975094 ("examples/distributor: new sample app")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Make Rx and Tx queue sizes configurable from the command line.
This helps DTS write better test cases.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Kathleen Capella <kathleen.capella@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
nb_rxd and nb_txd are used in polling mode and event mode of
operation. nb_rxd and nb_txd are already global in polling mode
but are not visible to event mode code. Make them visible to all
parts of the application.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Kathleen Capella <kathleen.capella@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Yingya Han < yingyax.han@intel.com>
Add support to define ipv4 and ipv6 forwarding tables
from reading from a config file for EM with a format
similar to l3fwd-acl one.
Users can now use the default hardcoded route tables
or optionally config files for 'l3fwd_em'. Default
config files have been provided for use with EM.
Related l3fwd docs have been updated to reflect these
changes.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add support to define ipv4 and ipv6 forwarding tables
from reading from a config file for LPM and FIB,
with format similar to l3fwd-acl one.
Users can now use the default hardcoded route tables
or optionally config files. Default config files have
been provided for use with LPM and FIB.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Currently dumpcap tries to initialize dpdk before parsing command line
arguments, this makes it impossible to check version or help without
having the primary process running already.
Signed-off-by: Ben Magistro <koncept1@gmail.com>
If the rte_eth_promiscuous_enable() fails, then log the error
and continue.
Coverity issue: 373662
Fixes: cbb44143be74 ("app/dumpcap: add new packet capture application")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If conversion of cBPF to eBPF fails (in rte_bpf_convert)
then the test should not try and print the result.
Coverity issue: 373661
Fixes: 2eccf6afbea9 ("bpf: add function to convert classic BPF to DPDK BPF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If rte_ethlink_get fails, the code can just not add speed
to the pcap file.
Coverity issue: 373664
Fixes: 8d23ce8f5ee9 ("pcapng: add new library for writing pcapng files")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The mempool should be free when cleanup resources.
Signed-off-by: Tianli Lai <laitianli@tom.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Check lcore id value is not the maximum core supported.
Using lcore id without this check might cause
out of bound access inside the rte_eal_wait_lcore.
Coverity issue: 375841
Fixes: b2854d5317e8 ("app/pdump: support multi-core capture")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Monitor thread handles graceful shutdown according to the value of
specific sensors in device, two issues are found below.
1. Thread is not created when card is probed.
2. Thread is canceled without checking presence of other cards.
To fix them, thread is created in pci device probe function, a reference
count is checked before canceling the thread.
Fixes: 9c006c45 ("raw/ifpga: scan PCIe BDF device tree")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Scalar variable sub_brg_bdf may be used uninitialized in function
ifpga_rawdev_fill_info(). It is initialized now in this fix.
Coverity issue: 375805
Fixes: 9c006c45d0c5 ("raw/ifpga: scan PCIe BDF device tree")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
The node clone API parameter 'name' is the new node's postfix name, not
the final node name, so it makes no sense to check it. And the new name
will be checked duplicate when calling API '__rte_node_register'.
And update the test case to call clone API twice to check the real name
duplicate.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
'rte_pie_rt_data_init(NULL)' is not expected, and it's ought to
fail when this happen. The malloc inside the function didn't work.
So remove the malloc otherwise will lead to a memory leak.
Fixes: 44c730b0e37971 ("sched: add PIE based congestion management")
Cc: stable@dpdk.org
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The ret value in rte_dev_event_monitor_stop stands for whether the
monitor has been successfully closed, and should not bind with
rte_intr_callback_unregister, so once it goes to the right exit point of
rte_dev_event_monitor, the ret value should be set to 0.
Also, the refmonitor count has been carefully evaluated, the value
change from 1 to 0, so there is no potential memory leak failure.
Fixes: 1fef6ced07f3 ("eal/linux: allow multiple starts of event monitor")
Cc: stable@dpdk.org
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
Setting driver pointer before mapping required for write combining
support since commit 4a928ef9f611 ("bus/pci: enable write combining
during mapping").
Move comments that got separated after different changes.
Also change the condition relying on dev->driver itself.
Signed-off-by: David Marchand <david.marchand@redhat.com>
dpdk-vhost will fail to launch with a 40G i40e port because
there are not enough mbufs. This patch adds a new option
--total-num-mbufs, through which the user can set larger
mbuf pool to avoid this problem.
Fixes: 4796ad63ba1f ("examples/vhost: import userspace vhost application")
Cc: stable@dpdk.org
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The punctuation after the `global` keyword should be colon, not
semicolon. The default gcc linker accepts both colon and semicolon, but
the gold linker will report syntax error if we use semicolon after the
`global` keyword.
Fixes: 94c16e89d779 ("vhost: mark vDPA driver API as internal")
Cc: stable@dpdk.org
Signed-off-by: Peng Yu <penyu@amazon.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Build fails with custom max eth ports configuration, like
-Dmax_ethports=1024.
Build error is:
../drivers/common/cnxk/roc_nix_inl_dev.c:794:2:
note: in expansion of macro ‘PLT_STATIC_ASSERT’
| PLT_STATIC_ASSERT(sizeof(struct nix_inl_dev) <= ROC_NIX_INL_MEM_SZ);
| ^~~~~~~~~~~~~~~~~
Earlier soft expiry ring struct member was an array of pointers and it's
size is linked to number of RTE_MAX_ETHPORTS, and the whole struct size
is confined and protected by size assertion.
It resulted in build failure with -Dmax_ethports=1024 option and
assertion caught that failure.
Use dynamically allocated memory for storing soft expiry ring base
addresses which fixes the struct size against custom RTE_MAX_ETHPORTS
values and solves the static assertion failure.
Bugzilla ID: 940
Fixes: bea5d990a93b ("net/cnxk: support outbound soft expiry notification")
Cc: stable@dpdk.org
Reported-by: Wei Ling <weix.ling@intel.com>
Reported-by: Yu Jiang <yux.jiang@intel.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Srikanth Yalavarthi <syalavarthi@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Testpmd forwards packets in checksum mode that it needs to calculate
the checksum of each layer's protocol.
When setting the hardware calculates the outer UDP checksum and the
software calculates the outer IP checksum, the dev->tx_pkt_burst in
ice_set_tx_function is set to ice_xmit_pkts_vec_avx2.
The inner and outer UDP checksum of the tunnel packet after forwarding
is wrong.The dev->tx_pkt_burst should be set to ice_xmit_pkts.
The patch adds RTE_ETH_TX_OFFLOAD_OUTER_UDP_CKSUM to
ICE_TX_NO_VECTOR_FLAGS, set dev->tx_pkt_burst to ice_xmit_pkts. After
the tunnel packet is forwarded, the inner and outer UDP checksum is
correct.
At the same time, the patch of "net/ice: fix Tx Checksum offload" will
cause interrupt errors in a special case that only inner IP and inner
UDP checksum are set for hardware calculation. The patch is updating
ICE_TX_NO_VECTOR_FLAGS, the problem can be solved, so I will restore the
code modification of that patch.
Fixes: 28f9002ab67f ("net/ice: add Tx AVX512 offload path")
Fixes: 295968d17407 ("ethdev: add namespace")
Fixes: 17c7d0f9d6a4 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
If PF has PTP enabled the data offset should be adjusted for VF to
skip extra 8 bytes of timestamp as the MAC inserts 8 bytes before
the ethernet header.
Fixes: c443e0d326e1 ("common/cnxk: support NIX PTP")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Revert change [1] to return error on case where no slab of free
resources is found. That error check break's a case where
there is a spare schedule queue to be reused that was just
allocated for sake of contiguous static TM nodes.
[1]
Fixes: 14f7e5d4bf2d ("common/cnxk: add missing checks of return values")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix AES-GMAC size, set it to the required value, unlike lookaside
where it also includes salt length.
Fixes: 6bc987ecb860 ("net/iavf: support IPsec inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Flex item API provides support for network header with a fixed and
variable lengths.
When PMD compiles a new flex item object configuration it converts
RTE parameters into matching PMD PARSE_GRAPH parameters and checks
the parameter values against port capabilities.
Current implementation mismatched PARSE_GRAPH configuration fields
for the fixed size header.
Fixes: b293e8e49d78 ("net/mlx5: translate flex item configuration")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Device arguments list is provided along with its identifier as part of
EAL arguments.
The arguments specified in the list are taken from it, and the rest is
initialized to the default values.
When no list is provided at all, all arguments should have been
initialized to their default values. However, they are mistakenly
initialized to zero which may be a valid value for some.
This patch initializes the default values before checking whether
arguments have been specified.
Bugzilla ID: 945
Fixes: a729d2f093e9 ("common/mlx5: refactor devargs management")
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
On TCP/IP-based layered network, ICMP is considered and implemented
as part of layer 3 IP protocol. Actually, it is a user of the IP
protocol and must be encapsulated within IP packets. There is no
layer 4 protocol over ICMP.
The rule with layer 4 should be matched prior to the rule only with
layer 3 pattern when:
1. Both rules are created in the same table
2. Both rules could be hit
3. The rules has the same priority
The steering result of the packet is indeterministic if there are
rules with patterns IP and IP+ICMP in the same table with the same
priority. Like TCP / UDP, a packet should hit the rule with a longer
matching criterion.
By treating the priority of ICMP/ICMPv6 as a layer 4 priority in the
PMD internally, the IP+ICMP will be hit in prior to IP only.
Fixes: d53aa89aea91 ("net/mlx5: support matching on ICMP/ICMP6")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Reduce flex item flow handle size from 32 bits to 8 bits for each
flow.
The patch will save memory in setups with millions of flows.
Fixes: a23e9b6e3ee9 ("net/mlx5: handle flex item in flows")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
GRE item translation must set inner protocol value.
For that reason the item is not translated inplace when PMD
translation iterates over flow items, but moved after the loop, when
all inner types are discovered.
If PMD does not translate GRE flow item inside the translation loop
it must save the GRE item for access outside the loop.
Fixes: 985b479267aa ("net/mlx5: fix GRE protocol type translation for Verbs")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
A pattern template creation shares the parsing mechanism with
a simple flow creation. The pattern template creation only consists
of pattern items while the flow creation continues with actions.
The parsing mechanism now accommodates both cases and allows to stop
at the item end token, which should not happen for the flow creation.
Fix parsing mechanism to differentiate between these two cases.
Bugzilla ID: 941
Fixes: 04cc665fab38 ("app/testpmd: add flow template management")
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
