Devices belonging to BCM573xx and BCM5740x family will not be supported
from the 21.02 release.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove list of supported OS in PMD specific doc.
Documenting an unsupported version of OS makes more sense in
PMD specific docs.
Platforms tested with this device is documented in release notes anyway.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We should be encouraging the use of vfio-pci for developers, not telling
them to use igb_uio.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Update the pdump library programmers guide and Howto doc
with the use of multi process channel replacing socket
based communication.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This document never had any license or copyright on this file, add one.
Fixes: b932ebcb26 ("doc: add NIC performance guide on Linux IA")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch corrects a grammatical error by changing 'an DPDK' to 'a DPDK',
so that the sentences can become grammatically accurate.
Fixes: 2e486e2632 ("doc: remove Intel references from linux guide")
Fixes: 48624fd96e ("doc: remove Intel references from prog guide")
Fixes: e0c7c47319 ("doc: remove Intel references from sample apps guide")
Cc: stable@dpdk.org
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
There is a discrepancy between ethdev API and flow rules guide
regarding flow rules maintenance after port stop.
librte_ethdev.h declares that flow rules will not be stored in PMD
after port stop:
>>>>> Quote start
Please note that some configuration is not stored between calls to
rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration
will be retained:
- MTU
- flow control settings
- receive mode configuration (promiscuous mode, all-multicast mode,
hardware checksum mode, RSS/VMDQ settings etc.)
- VLAN filtering configuration
- default MAC address
- MAC addresses supplied to MAC address array
- flow director filtering mode (but not filtering rules)
- NIC queue statistics mappings
<<<< Quote end
PMD cannot always correctly restore flow rules after port stop / port
start because application may alter port configuration after port stop
without PMD knowledge about undergoing changes. Consider the
following scenario:
application configures 2 queues 0 and 1 and creates a flow rule with
'queue index 1' action. After that application stops the port and
removes queue 1.
Although PMD can implement flow rule shadow copy to be used for
restore after port start, attempt to restore flow rule from shadow
will fail in example above and PMD could not notify application about
that failure. As the result, flow rules map in HW will differ from
what application expects. In addition, flow rules shadow copy used
for port start restore consumes considerable amount of system memory,
especially in systems with millions of flow rules.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This is an improved version of the setup of huge pages
bases on earlier DPDK setup.
Differences are:
* autodetects NUMA vs non NUMA
* allows setting different page sizes
recent kernels support multiple sizes.
* accepts a parameter in bytes (not pages).
* can display current hugepage settings.
Most users will just use --setup argument but if necessary
the steps of clearing old settings and mounting/umounting
can be done individually.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
mlx5 PMD refuses to update link state if link speed is defined but
status is down or if link speed is undefined but status is up, even if
the ioctl() succeeded.
This prevents application to detect link up/down event, especially when
the link speed is not correctly detected.
Commit [1] allowed returning unknown link speed, so now PMD allows
the return of unknown link speed in the above case.
Due to some old kernel driver bug, link speed wasn't detected properly.
[1] http://git.dpdk.org/dpdk/commit/?id=810b17d116f03
Signed-off-by: Benoît Ganne <bganne@cisco.com>
Signed-off-by: Raslan Darawsheh <rasland@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
AF_XDP will not work on 32-bit kernels before version 5.4.
Document this restriction in the driver guide.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
This patch defines new RSS offload types for eCPRI. For eCPRI with
Message Type 0, the hash field is physical channel ID.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The changeset that introduced common flow API thread safety
in fact introduced double locking to this particular PMD as
RTE flow API implementation in the PMD has been thread-safe
since the day zero. State this by setting the corresponding
device flag to skip locking imposed by generic RTE flow API.
Fixes: 80d1a9aff7 ("ethdev: make flow API thread safe")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Update the user guide of ip pipeline sample application
to reflect the changes in command line arguments.
Fixes: 54a298e5f7 ("examples/ip_pipeline: update subport rate dynamically")
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Currently, when building sphinx documentation, the build will only
succeed if being run from the build system, because the conf.py script
expects DPDK_VERSION environment variable to be set, and crashes if it
is not.
However, there are certain external tools (such as sphinx documentation
preview extensions for certain IDE's) that use live preview and thus
rely on running their own sphinx commands. In these cases, it is useful
to permit building sphinx documentation without specifying the
DPDK_VERSION environment variable. The version string is the only thing
preventing manual sphinx build commands from working.
Fix the conf.py to use "None" as a version string in cases when
DPDK_VERSION environment variable is not set.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
-w option in this context is an application option for coremask.
Restore it.
Fixes: db27370b57 ("eal: replace blacklist/whitelist options")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The words blacklist and whitelist are avoided in text
about MAC filtering or kernel module.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Replace -w / --pci-whitelist with -a / --allow options
and --pci-blacklist with --block.
The -b short option remains unchanged.
Allow the old options for now, but print a nag
warning since old options are deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Rename the enum values in the EAL include files.
As a backward compatible temporary migration tool, define
a replacement mapping for old values.
The old names relating to blacklist and whitelist are replaced
by block list and allow list, but applications may be using the
older compatibility macros, marked as deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add queue depth threshold and class of service sections
to DLB2 rst file.
Fixes: 5433956 ("event/dlb2: add eventdev probe")
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Updated AESNI MB and AESNI GCM PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding reference to pf_bb_config in github to do
device configuration of the fpga_5gnr, fpga_lte and
acc100 devices and pmds.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Update release note for large VF, supporting up to 256 queue pairs per
VF.
Fixes: e436cd4383 ("net/iavf: negotiate large VF and request more queues")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
With pkg-config support available within AArch64crypto library,
meson option 'armv8_crypto_dir' can be removed.
PKG_CONFIG_PATH environment variable should be set appropriately
to use the crypto library.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For users with 32-bit applications who wish to use DPDK we need to provide
instructions on creating a 32-bit build of DPDK with meson. Therefore add a
section with this information to the GSG.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Currently, flow-perf measures the performance of
rule installation/deletion operations by breaking
down the entire number of operations into windows
of fixed size (i.e., 100000 operations per window).
Then, flow-perf measures the total time per window
and computes an average time across all windows.
This commit allows flow-perf users to configure
the number of rules per window instead of using
a fixed pre-compiled value. To do so, users must
pass --rules-batch=N, where N is the number of
rules per window (or batch).
For consistency reasons, flow_count variable is
now renamed to rules_count. This variable is the
total number of rules to be installed/deleted.
For example, if a user wants to measure how much
time it takes to install 1M rules in a certain NIC,
he/she can input:
--rules-count=1000000
This way flow-perf will break down 1M flow rules into
10 batches of 100k flow rules each (this is the default
batch size) and compute an average across the 10
measurements.
Now, if the user modifies the number of rules per
batch as follows:
--rules-count=1000000 --rules-batch=500000
then flow-perf will break down 1M flow rules into
2 batches of 500k flow rules each and compute the
average across the 2 measurements.
Finally, this commit also adds default variables
to the usage function instead of hardcoded values.
Signed-off-by: Georgios Katsikas <katsikas.gp@gmail.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Remove notice announcing an already-implemented change.
In 19.05, rte_power_set_env was changed to return -1 in cases where
the environment was already set up, and for the same release, a
deprecation notice was added.
This patch removes that notice.
The API change was tested by calling rte_power_set_env twice. The first
call succeeded, and the second call failed, as expected.
Fixes: 5a5f3178d4 ("power: return error when environment already set")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
The typo "withe" should have been "with the". This is now fixed.
Fixes: 89397a01ce ("kni: set default carrier state of interface")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update release notes with feature of outer IP hash for GTPC and GTPU.
Fixes: 6cd2d6adc7 ("net/iavf: support outer IP hash for GTPC")
Fixes: 262100a34a ("net/iavf: support outer IP hash for no inner GTPU")
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This attribute helps PMDs to tell actions supposed to work
on the so-called hardware e-switch level from regular ones.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
The hyperlink in the IGC documentation showed the whole link in italics
and was not clickable. This is now fixed to have a clickable label.
Fixes: 66fde1b943 ("net/igc: add skeleton")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
CQE compression allows us to save the PCI bandwidth and improve
the performance by compressing several CQEs together to a miniCQE.
But the miniCQE size is only 8 bytes and this limits the ability
to successfully keep the compression session in case of various
traffic patterns.
The current miniCQE format only keeps the compression session alive
in case of uniform traffic with the Hash RSS as the only difference.
There are requests to keep the compression session in case of tagged
traffic by RTE Flow Mark Id and mixed UDP/TCP and IPv4/IPv6 traffic.
Add 2 new miniCQE formats in order to achieve the best performance
for these traffic patterns: Flow Tag and Packet Header miniCQEs.
The existing rxq_cqe_comp_en devarg is modified to specify the
desired miniCQE format. Specifying 2 selects Flow Tag format
for better compression rate in case of RTE Flow Mark traffic.
Specifying 3 selects Checksum format (existing format for MPRQ).
Specifying 4 selects L3/L4 Header format for better compression
rate in case of mixed TCP/UDP and IPv4/IPv6 traffic.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When receiving packets, netvsp puts data in a buffer mapped through UIO.
Depending on packet size, netvsc may attach the buffer as an external
mbuf. This is not a problem if this mbuf is consumed in the application,
and the application can correctly read data out of an external mbuf.
However, there are two problems with data in an external mbuf.
1. Due to the limitation of the kernel UIO implementation, physical
address of this external buffer is not exposed to the user-mode. If
this mbuf is passed to another driver, the other driver is unable to
map this buffer to iova.
2. Some DPDK applications are not aware of external mbuf, and may bug
when they receive an mbuf with external buffer attached.
Introduce a driver parameter "rx_extmbuf_enable" to control if netvsc
should use external mbuf for receiving packets. The default value is 0.
(netvsc doesn't use external mbuf, it always allocates mbuf and copy
data to mbuf) A non-zero value tells netvsc to attach external buffers
to mbuf on receiving packets, thus avoid copying memory.
Signed-off-by: Long Li <longli@microsoft.com>
The values for Rx and Tx copy break should be tunable rather
than hard coded constants.
The rx_copybreak sets the threshold where the driver uses an
external mbuf to avoid having to copy data. Setting 0 for copybreak
will cause driver to always create an external mbuf. Setting
a value greater than the MTU would prevent it from ever making
an external mbuf and always copy. The default value is 256 (bytes).
Likewise the tx_copybreak sets the threshold where the driver
aggregates multiple small packets into one request. If tx_copybreak
is 0 then each packet goes as a VMBus request (no copying).
If tx_copybreak is set larger than the MTU, then all packets smaller
than the chunk size of the VMBus send buffer will be copied; larger
packets always have to go as a single direct request. The default
value is 512 (bytes).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Long Li <longli@microsoft.com>
The v2.2.0 adds support for network interface metrics, includes some bug
fixes and updates HAL to the latest version.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The ARMv8 platform support was tested and works fine with the ENA PMD.
It can be used on the AWS a1.* and m6g.* instances.
The ARMv8 support in ENA is at least from v19.11, where the VFIO DPDK
driver was fixed to work with 32-bit applications compiled for arm.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
The ID 0xEC21 is not associated with LLQ feature of the device, so it
would be misleading for the user. Because of that, the current
identifier is more precise.
Together with code update, the documentation was changed to reflect
current changes
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Guy Tzalik <gtzalik@amazon.com>
Enable metadata extraction for flexible descriptors in AVF, that would
allow network function directly get metadata without additional parsing
which would reduce the CPU cost for VFs. The enabling metadata
extractions involve the metadata of VLAN/IPv4/IPv6/IPv6-FLOW/TCP/MPLS
flexible descriptors, and the VF could negotiate the capability of
the flexible descriptor with PF and correspondingly configure the
specific offload at receiving queues.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The legacy filter API, including rte_eth_dev_filter_supported() and
rte_eth_dev_filter_ctrl() is removed. Flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>