Ensure all lists of drivers are standardized:
* one driver per line
* lists double-indented with spaces (as they are line continuations)
* elements in alphabetical order
* opening and closing list brackets "[" & "]" on own lines
* last element has trailing comma
Any code snippets in the list files is adjusted to single-indent using
whitespace to correspond to the new style also.
The lists of standard library dependencies per class, and other short
lists are not formatted one-per-line as these lists are not expected to
grow beyond 2 or 3 entries.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
These headers are used but not included explicitly, including them.
"arpa/inet.h" is included for 'htons' and friends.
"netinet/in.h" is included for 'IPPROTO_IP'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
When device is re-configured, memory allocated for work slot is freed
and new memory is allocated. Due to this we may loose some important
configurations/mappings done with initial work slot memory.
For example, whenever rte_event_eth_tx_adapter_queue_add is called
some important meta i.e. txq handle is stored in work slot structure.
If device gets reconfigured after this tx adaptor add, txq to work
slot mapping will be lost resulting in seg fault during packet
processing, as txq handle could not be retrieved from work slot.
Fixes: 67b5f4686459 ("event/octeontx2: add port config functions")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Use virtual counter for estimating current bucket as PMU cannot be
reliably used to estimate time.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reduce amount of memory used by chunk pool when the mempool used
is OCTEONTX2 NPA.
Previously, the number of chunks configured when NPA is used is
equal to the number of timers requested plus the number of buckets
and if the max timeout is long enough w.r.t. resolution requested
there will a large number of buckets which would cause high memory
usage.
Reduce the number of chunks when NPA is used to the number of timers
requested as buckets that are processed chunk lists are automatically
freed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Simplify timer bucket estimation we need not align buckets to
power of 2 instead use reciprocal division to compute mod.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When XAQ pool is being re-configured, and if the same memzone
is used for fc_mem when freeing the old mempool the fc_mem
will be incorrectly updated with the free count.
Fixes: ffa4ec0b6063 ("event/octeontx2: allow adapters to resize inflight buffers")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Remove event/dlb driver from DPDK code base.
Updated release note's removal section to reflect the same.
Also updated doc/guides/rel_notes/release_20_11.rst to fix the
the missing link issue due to removal of doc/guides/eventdevs/dlb.rst
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Today it is difficult to know if the SW Eventdev PMD is making
forward progress when it runs an iteration of its service. This
commit adds two xstats to give better visibility to the application.
The new xstats provide an application with which Eventdev ports
received work in the last iteration of scheduling, as well if
forward progress was made by the scheduler.
This patch implements an xstat for the SW PMD that exposes a
bitmask of ports that were scheduled to. In the unlikely case
that the SW PMD instance has 64 or more ports, return UINT64_MAX.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
The header file fcntl.h should not be included from sys/ directory
as done in dlb drivers, it is an error with musl libc.
Fixes: 19980083fd57 ("event/dlb: add eventdev probe")
Fixes: 5433956d5185 ("event/dlb2: add eventdev probe")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
The page size is often retrieved from the macro PAGE_SIZE.
If PAGE_SIZE is not defined, it is either using hard coded default,
or getting the system value from the UNIX-only function sysconf().
Such definitions are replaced with the generic function
rte_mem_page_size() defined for each supported OS.
Removing PAGE_SIZE definitions will fix dlb drivers for musl libc,
because #ifdef checks were missing, causing redefinition errors.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Boyer <aboyer@pensando.io>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Rename PKT_RX_EIP_CKSUM_BAD to PKT_RX_OUTER_IP_CKSUM_BAD and
deprecate the original name. The new name is better aligned
with existing PKT_RX_OUTER_* flags, which should help reduce
confusion about its use.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The rte_eventdev_pmd*.h files are for drivers only and should be private
to DPDK, and not installed for app use.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Enhance Tx path cache locality, remove current tag type and group
stores from datapath to conserve store buffers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The `data_sz` name is fine, but it looks out of place because nothing
else has "data" prefix in that structure. Rename it to "size", as well
as add more clarity to the comments around each struct member.
Fixes: 6a17919b0e2a ("eal: change power intrinsics API")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
As announced in the deprecation note, remove all compatibility build
defines from previous make/meson versions and use only the standardized
ones - RTE_LIB_<name> for libraries, and RTE_<CLASS>_<NAME> for drivers.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
CN98xx SoC comes up with two CPT blocks wrt
CN96xx, CN93xx, to achieve higher performance.
Adding support to allocate all LFs of VF with even BDF from CPT0
and all LFs of VF with odd BDF from CPT1.
If LFs are not available in one block then they will be allocated
from alternate block.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Instead of passing around pointers and integers, collect everything
into struct. This makes API design around these intrinsics much easier.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Unlinking queues from port should be done during port release. Doing it
during device re-configuration could result in segfault as ports array
is re-allocated based on new number of ports.
Fixes: f7ac8b66b23c ("event/octeontx2: support linking queues to ports")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fix unconditional Tx flush, in case of Tx only we need to check if
work slot is non-empty before issuing flush.
Also, in packet retransmit cases added check for the reference
count and flush the work slot only for the last packet.
Fixes: cb7ee83b6365 ("event/octeontx2: improve single flow performance")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Since selftest now depends on dynamic mbuf fields it is not
feasible to run selftest on device probe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Use rte_pci_find_ext_capability instead of private version,
Remove unused PCI offsets and values
Use PCI definitions from rte_pci.h, where available.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Add missing returns so that the memzone free is not called if
port create is successful.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Mike Ximing Chen <mike.ximing.chen@intel.com>
Use rte_pci_find_ext_capability instead of private version,
Remove unused PCI offsets and values
Use PCI definitions from rte_pci.h, where available.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
The code contained in this commit was inadvertently omitted
when dissecting the dlb2 code base into discrete patches for
upstream.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Mike Ximing Chen <mike.ximing.chen@intel.com>
The drivers for OCTEON TX2 are not supported in 32-bit mode.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
These entry points are NO-OPS. DLB does not support
reconfiguring individual queues or ports. The entire device
must be reconfigured.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add a variety of self-tests for both ldb and directed
ports/queues, as well as configure, start, stop, link, etc...
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The PMD uses a public interface to allow applications to
control the token pop mode. Supported token pop modes are
as follows, and they impact core scheduling affinity for
ldb ports.
AUTO_POP: Pop the CQ tokens immediately after dequeueing.
DELAYED_POP: Pop CQ tokens after (dequeue_depth - 1) events
are released. Supported on load-balanced ports
only.
DEFERRED_POP: Pop the CQ tokens during next dequeue operation.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for eventdev stop and close entry points.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for dequeue, dequeue_burst, ...
DLB does not currently support interrupts, but instead uses
umonitor/umwait if supported by the processor. This allows
the software to monitor and wait on writes to a cache-line.
DLB supports normal and sparse cq mode. In normal mode the
hardware will pack 4 QEs into each cache line. In sparse cq
mode, the hardware will only populate one QE per cache line.
Software must be aware of the cq mode, and take the appropriate
actions, based on the mode.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add support for the eventdev start entry point.
DLB delays setting up single link resources until
eventdev start, because it is only then that it can
ascertain which ports have just one linked queue.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add supports for the port unlink(s) eventdev entry points.
The unlink operation is an asynchronous operation executed by
a control thread, and the unlinks-in-progress function reads
a counter shared with the control thread. Port QE and memzone
memory is freed here.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Add port link entry point. Directed queues are identified and created
at this stage. Their setup deferred until link-time, at which
point we know the directed port ID. Directed queue setup
will only fail if this queue is already setup or there are
no directed queues left to configure.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
