In mlx5 PMD, the meter hierarchy only supports the green color. It
means that a meter action can only be in the green action list. In
the meanwhile, the yellow action list should be empty now. Any
action for the yellow color policy will be considered invalid if
the green color policy is a hierarchy.
Also, the error message printing of meter hierarchy validation is
fixed by removing an incorrect checking.
Fixes: 4b7bf3ffb4 ("net/mlx5: support yellow in meter policy validation")
Fixes: a3b7af90ba ("net/mlx5: validate meter action in policy")
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Both green policy and yellow policy could support RSS actions
simultaneous, the Rx queues configuration may be different between
them while the other fields should be the same.
When the only green color policy was supported in the past, the
queues copied and saved in the temporary workspace were used. Since
the yellow support was added, the queues stored in the thread
workspace would be overwritten by the yellow color policy. The flow
rule created using a meter with such a policy would have the same
RSS distribution for both green and yellow packets.
By using the meter action containers RSS information instead of the
workspace RSS, this overwritten can be prevented.
Fixes: b38a12272b ("net/mlx5: split meter color policy handling")
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Before the yellow color policy was supported, the only supported
profile of metering is RFC2697 and EIR is not part of the profile.
When creating a meter with this profile, the EIR part was always
zero.
After the yellow color policy supported and RFC2698 & 4115 support
was introduced, EIR is relevant and should be calculated. Usually
the EIR could not be zero and the formula for calculating CIR
mantissa & exponent could be reused.
The EIR could be 0 and then only green and red colors will be
supported from the specification. Both the mantissa and exponent
parts should be set to 0. Currently, the formula wrongly sets
non-zero values for the EIR=0 case.
Setting the mantissa and the exponent parts to zeros when EIR is 0
will solve the issue.
Fixes: 33a7493c8d ("net/mlx5: support meter for trTCM profiles")
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
After the support for yellow color and RFC2698 & RFC4115 were added,
the profile validation adjustment was missed. With this fix, the
validation is like below:
1. Legacy metering only supports RFC2697 without EBS.
2. ASO metering can support all three profiles.
3. For backward compatibility, none EBS with RFC2697 profile is
still supported and the checking is done in the meter
creation stage.
In the meanwhile, some checking which was done in the parameters
calculation stage is moved in the validation in order to skip the
useless checking.
Fixes: 33a7493c8d ("net/mlx5: support meter for trTCM profiles")
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The send scheduling on timestamp offload requires the Send
Queue (SQ) shares its User Access Region (UAR) with the
pacing Clock Queue. The SQ can be created by mlx5 PMD either
with DevX or with Verbs. If the SQ is being created with
DevX, the dedicated UAR can be specified and all the SQs
share the single UAR. Once SQ is being created with Verbs
the SQ's UAR is allocated by the rdma-core library internally
on its own and there is no UAR sharing. This caused hardware
errors on WAIT WQEs and overall send scheduling malfunction.
If SQs are going to be created with Verbs and the send
scheduling offload is explicitly requested via tx_pp devarg
the device probing is rejected as device configuration
can't satisfy the requirements.
Fixes: 3ec73abeed ("net/mlx5/linux: fix Tx queue operations decision")
Fixes: 8f848f32fc ("net/mlx5: introduce send scheduling devargs")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The committing completions by clock queue might be delayed
after queue initialization is done and the only Clock Queue
completion entry (CQE) might keep the invalid status till
the CQE first update happens.
The mlx5_txpp_update_timestamp() wrongly recognized invalid
status as error and reported about lost synchronization.
The patch recognizes the invalid status as "not updated yet"
and accurate scheduling initialization routine waits till
CQE first update happens.
Some collateral typos in comment are fixed as well.
Fixes: 77522be0a5 ("net/mlx5: introduce clock queue service routine")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The concrete function names have a prefix for flow_dv.
This emphasizes the flow engine is Direct Verbs.
The function flow_get_aged_flows doesn’t have this prefix.
It creates an inconsistency with the other functions.
Update the function name to include dv.
Fixes: fa2d01c87d ("net/mlx5: support flow aging")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
As [1] optimized the MPLS RSS expansion before, this commit limits
the implicitly MPLS RSS expansion for MPLSoGRE as well. For the
RSS flow matcher to GRE level only, it will not expand the MPLS
match item for the sub flows due to performance consideration.
The original RSS flow match item:
ETH VLAN IPV6 GRE GRE_KEY END
The previous RSS expansion:
ETH VLAN IPV6 GRE GRE_KEY END
ETH VLAN IPV6 GRE GRE_KEY IPV4 END
ETH VLAN IPV6 GRE GRE_KEY MPLS IPV4 END
ETH VLAN IPV6 GRE GRE_KEY MPLS ETH IPV4 END
New RSS expansion:
ETH VLAN IPV6 GRE GRE_KEY END
ETH VLAN IPV6 GRE GRE_KEY IPV4 END
[1]
commit a26cc30fa0 ("net/mlx5: limit inner RSS expansion for MPLS")
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Xiaoyu Min <jackmin@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The selection flags for the RX hash define how the received packets will
be distributed between multiple queues.
When creating a new TIR, the queue_num is set to 1 if none of the selection
flags is set.
Applied the same to the RSS desc before checking if it matches a cached
TIR object to save creating a new object every time.
Fixes: fabf8a3724 ("net/mlx5: fix shared RSS action release")
Cc: stable@dpdk.org
Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The RSS hash types defined in the API do not support setting the L4 proto
type (TCP or UDP) without setting the L3 proto. For example, ETH_RSS_TCP
is defined as
(ETH_RSS_NONFRAG_IPV4_TCP | \
ETH_RSS_NONFRAG_IPV6_TCP | \
ETH_RSS_IPV6_TCP_EX).
The L3 proto of the RSS hash type may be different than the one defined
in the pattern, for example:
testpmd> flow create .../ ipv4 / tcp / end actions rss types ipv6-tcp-ex
end / end
If the RSS hash type also includes L4 proto type as in the above example,
the selection flags for the RX hash are currently set with SPORT/DPORT
without setting SRC/DST IP. As this combination is not supported, it does
not match any of the pre-created TIRs of the indirect RSS action
and the flow creation fails.
The fix is to prevent setting the selection flags for the RX hash with
SPORT/DPORT without setting SRC/DST IP. It applies non-RSS processing of
the received packets. In case of indirect RSS action, it will match the
MLX5_RSS_HASH_NONE pre-created TIR.
Fixes: b1d63d8293 ("net/mlx5: support RSS on src or dst fields only")
Fixes: 4a78c88e3b ("net/mlx5: fix Verbs flow tunnel")
Cc: stable@dpdk.org
Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Due to hardware limitations, the decap action (such as
VXLAN/NVGRE/RAW decap) can't follow the sample action in the
same flow, to keep the original action order of sample and decap
actions the flow was internally split into two subflows by PMD,
the sample action was moved into prefix subflow in the original table,
and decap action was moved into suffix subflow in the new table.
There is a specific combination of raw decap and raw encap actions
to specify "L3 encapsulation" packet transformation - raw decap action
to remove L2 header and raw encap to add the tunnel header.
This specific L3 encapsulation is encoded as a single packet reformat
hardware transaction and is supported by hardware after sample
action (no hardware limitations for packet reformat).
The "L3 encapsulation" with mirror actions in the same flow was not handled
correctly in the previous commit.
The patch checks whether the decap action is part of "L3 encapsulation"
and does not move the decap action into suffix subflow for the case.
Fixes: cafd87f62a ("net/mlx5: fix VLAN push/pop and decap actions with mirror")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
During the start up stage, the hairpin auto bind was executed for
each port. All the Tx and Rx queues configured for this port should
be checked to confirm if the auto bind of hairpin is needed.
1. The queue is hairpin queue.
2. The peer port is the same one and the peer queue should also be
with hairpin type.
3. The manual bind attribute is not set for this queue.
If the queue is not a hairpin queue or it doesn't need to be bound
automatically, the reference count should be decreased by 1 since
the count was increased when calling the mlx5_*xq_get().
When the peer port is not the same, it means that no auto bind is
supported and the mlx5_*xq_release() was missed in the current
implementation.
By calling the release function before continue, the count is
correct when calling the device close.
Fixes: aa8bea0e34 ("net/mlx5: add conditional hairpin auto bind")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In mlx5 PMD the PCI device interrupt vector was used by Uplink
representor exclusively and other VF representors did not support
interrupt mode.
All the VFs and Uplink representors are separate ethernet devices
and must have dedicated interrupt vectors.
The fix provides each representor with a dedicated interrupt
vector.
Fixes: 5882bde88d ("net/mlx5: fix representor interrupts handler")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Kernel PF may not respond to virtual channel commands
VIRTCHNL_OP_GET_RSS_HENA_CAPS and VIRTCHNL_OP_SET_RSS_HENA, which
will cause VF to fail to start.
RSS offload type configuration is not a necessary feature for VF,
so in order to improve VF compatibility, in this patch the PMD will
ignore the error result of above two commands and will print warnings
instead.
Fixes: 5a038d1996 ("net/iavf: fix RSS configuration on i40e VF")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Function check_tx_thresh is called with wrong parameter. If the
check fails, tx_queue_setup should return error not keep going.
This patch fixes above issues.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When virtio front-end initializes, the duplex mode should be set
unknown before reading any duplex mode information from configuration
space. This patch fixes the issue that duplex mode is by default set
to zero, which equals ETH_LINK_HALF_DUPLEX. This will lead to duplex
mode being half duplex when front-end does not have the feature
named VIRTIO_NET_F_SPEED_DUPLEX.
Fixes: 1357b4b362 ("net/virtio: support Virtio link speed feature")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Free memory of interrupt handle in virtio_user_dev_uninit() to
avoid memory leak.
when virtio user dev closes, memory of interrupt handle is not freed
that is allocated in virtio_user_fill_intr_handle().
Fixes: 3d4fb6fd25 ("net/virtio-user: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Gaoxiang Liu <liugaoxiang@huawei.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the vhost-user frontend like Virtio-user tries to
reconnect to the restarted Vhost backend, the Vhost backend
segfaults when multiqueue is enabled.
This is caused by VHOST_USER_GET_VRING_BASE being called for
a virtqueue that has not been created before, causing a NULL
pointer dereferencing.
This patch adds the VHOST_USER_GET_VRING_BASE requests to
the list of requests that trigger queue pair allocations.
Fixes: 160cbc815b ("vhost: remove a hack on queue allocation")
Cc: stable@dpdk.org
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Fix the driver to report maximum MTU obtained from config if
VIRTIO_NET_F_MTU is supported or calculated based on maximum
Rx packet length.
Fixes: ad97ceece1 ("ethdev: add min/max MTU to device info")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Running with stdout suppressed or redirected for further processing
is very confusing in the case of errors. Fix it by logging errors and
warnings to stderr.
Since lines with log messages are touched anyway concatenate split
format strings to make it easier to search using grep.
Fix indent of format string arguments.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch removes most uses of the global variable rte_eth_devices
from testpmd. This was done to avoid using the object directly which
applications should not do.
Most uses have been replaced with standard function calls, however
the use of it in the show_macs function could not be replaced as no
function call exists to get all mac addresses of a given port.
Signed-off-by: Paulis Gributs <paulis.gributs@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
MAC address of each port in global variable ports hasn't been updated
after resetting. It was the initial one after resetting VF MAC address.
This patch gets correct port MAC address when starting port.
Fixes: a5279d2561 ("app/testpmd: check status of getting MAC address")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Command help string is missing 'reset' keyword,
although description has it. Adding it.
Fixes: 97f1e19679 ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Currently, rte_sched_free_memory() is called multiple times by the
exception handling code in rte_sched_subport_config() and
rte_sched_pipe_config().
This patch optimizes them into a unified outlet to free memory.
Fixes: ac6fcb841b ("sched: update subport rate dynamically")
Fixes: 34a90f8665 ("sched: modify pipe functions for config flexibility")
Fixes: ce7c4fd7c2 ("sched: add pipe config to subport level")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes return value judgment when allocate memory to store the
subport profile, and releases memory of 'rte_sched_port' if code fails to
apply for this memory.
Fixes: 0ea4c6afca ("sched: add subport profile table")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The freqs array size is RTE_MAX_LCORE_FREQS. Before filling the
array with num_freqs elements, restrict the total num to
RTE_MAX_LCORE_FREQS. This fix aims to fix the coverity scan issue
like:
Overrunning array "pi->freqs" of 256 bytes by passing it to a
function which accesses it at byte offset 464.
Coverity issue: 371913
Fixes: ef1cc88f18 ("power: support cppc_cpufreq driver")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
The first argument to rte_bsf32_safe was incorrectly declared as
a 64 bit value. The code only works on 32 bit values and the underlying
function rte_bsf32 only accepts 32 bit values. This was a mistake
introduced when the safe version was added and probably cause
by copy/paste from the 64 bit version.
The bug passed silently under the radar until some other code was
built with -Wall and -Wextra in C++ and C++ complains about the
missing cast.
Yes, this is a API signature change, but the original code was wrong.
It is an inline so not an ABI change.
Fixes: 4e261f5519 ("eal: add 64-bit bsf and 32-bit safe bsf functions")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Errors detected during parsing of pattern items and actions
are reflected by setting RTE error, but the name of the bad
element is not disclosed, thus leaving the user to join the
dots themselves. Adjust the code to log missing information.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Extra log statements will provide more details to the user
in the case of errors discovered in the pattern or actions.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Rx/Tx doorbells statistics are collected in software and
available per queue. These stats are useful for performance
investigation.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Move getting MAC stats code that involves locking to separate functions
to simplify addition of new xstats.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no point to recalculate number of available xstats on
each request. The number is calculated once on device start
and may be returned on subsequent calls.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Return the latest stats snapshot in stopped state
instead of returning an error.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Device may support only some MAC stats. Add mapping from ids to subset
of supported MAC stats for each port.
Fixes: 73280c1e4f ("net/sfc: support xstats retrieval by ID")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Fix xstats by ID callbacks according to ethdev usage.
Handle combinations of input arguments that are required by ethdev
and sanity check and reject other combinations on callback entry.
Fixes: 73280c1e4f ("net/sfc: support xstats retrieval by ID")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Update MAC stats function reads adapter state with MAC stats locking
but without adapter locking. Add adapter locking before calling this
function and remove MAC stats locking since there's no point to have
it together with adapter locking. The second place MAC stats locking
is used is MAC stats reset function. It's called with adapter being
already locked so there's no point to use MAC stats locking anymore.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MAC stats lock in xstats_get_by_id() callback before reading
number of supported MAC stats.
Fixes: 73280c1e4f ("net/sfc: support xstats retrieval by ID")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
When the guest memory is hotplugged, the vhost application which
enables DMA acceleration must stop DMA transfers before the vhost
re-maps the guest memory.
To accomplish that, we need to do these changes in the vhost sample:
1. add inflight packets count.
2. add vring_state_changed() callback.
3. add inflight packets clear process in destroy_device() and
vring_state_changed().
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the guest memory is hotplugged, the vhost application which
enables DMA acceleration must stop DMA transfers before the vhost
re-maps the guest memory.
This patch is to notify the vhost application of stopping DMA
transfers.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Applications need to stop DMA transfers and finish all the inflight
packets when in VM memory hot-plug case and async vhost is used. This
patch is to provide an unsafe API to clear inflight packets which
are submitted to DMA engine in vhost async data path. Update the
program guide and release notes for virtqueue inflight packets clear
API in vhost lib.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The async vhost callback ops should return negative value when there
are something wrong in the callback, so the return type should be
changed into int32_t. The issue in vhost example is also fixed.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Fixes: 819a716858 ("vhost: fix async callback return type")
Fixes: 6b3c81db8b ("vhost: simplify async copy completion")
Fixes: abec60e711 ("examples/vhost: support vhost async data path")
Fixes: 6e9a9d2a02 ("examples/vhost: fix ioat dependency")
Fixes: 873e8dad6f ("vhost: support packed ring in async datapath")
Cc: stable@dpdk.org
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The prerequisite info is already present in the platform guide.
No need to repeat it in individual dev guides.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds validation of the port id for
rte_pmd_dpaa2_set_custom_hash API to check if the
port is a valid DPAA2 port. Also handles some
edge cases in the rte_pmd_dpaa2_mux_flow_create API.
Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA2 hardware require a hardware portal context.
If a thread doing DPAA2 i/o do not have portal, it will
allocate it on run-time. This may cause a delay in the
datapath at run-time. To avoid it, it is better to allocate
a hw context portal at the start of thread expected to do
i/o with DPAA2 hardware.
This patch makes necessary changes for the same and creates
a pmd API to allocate a hw context portal for a thread.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Add check for the PCD queue from the kernel interface
for default and error queues.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reuse DPDK rte_gettid instead of syscall.
It will help to reduce the dpaa portal allocation time.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch fixes providing the correct headroom size when
VSP is enabled.
Fixes: e4abd4ff18 ("net/dpaa: support virtual storage profile")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
if was allocated with rte_malloc, free shall be equivalent.
Fixes: 4762b3d419 ("bus/dpaa: delay fman device list to bus probe")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Remove Guy Tzalik as the driver's maintainer and add Shai Brandes who
will now be another maintainer of the ENA DPDK driver.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
