It enlarges the number of supported queues to hardware allowed
maximum. There was a software limitation of 64 per physical port
which is not reasonable.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
RSS implementation with parent/child QPs comes from mlx4 and is temporary.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
In its current state, this driver implements the bare minimum to initialize
itself and Mellanox ConnectX-4 adapters without doing anything else
(no RX/TX for instance). It is disabled by default since it is based on the
mlx4 driver and also depends on libibverbs.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Or Ami <ora@mellanox.com>
The vPMD RX function uses the multi-buffer and SSE instructions to
accelerate the RX speed, but now the pktype cannot be supported by the vPMD RX,
because it will decrease the performance heavily.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Enable vector ixgbe and i40e bulk alloc for bsd as it is
already done for linux.
Fixes: 304caba12643 ("config: fix bsd options")
Fixes: 0ff3324da2eb ("ixgbe: rework vector pmd following mbuf changes")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The RX_OLFLAGS option was renamed from DISABLE to ENABLE in driver code
and linux config.
It is now renamed also in bsd config and documentation.
Fixes: 359f106a69a9 ("ixgbe: prefer enabling olflags rather than not disabling")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When reverting the max queues per port to fix an ABI breakage,
the BSD config was forgotten.
Fixes: 94c6cba001ae ("config: revert the max queues per port to 256")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This is build infrastructure changes for bnx2x driver.
- enable BNX2X poll mode driver in default config.
- add it to mk
- put entry in MAINTAINERS
Note: I intentionally did not list myself as maintainer of this
driver. QLogic has discussed taking over as maintainer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC config option is not really
necessary, as bulk alloc rx function can be used anyway, as long as the
necessary conditions are satisfied, which are checked already
in the library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix "MACRO redefined" and "function redefined" compilation errors in FreeBSD
by adding CXGBE prefix to them. Also remove reference to a linux header
linux/if_ether.h and use DPDK macros directly. Finally, enable CXGBE PMD
for FreeBSD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In the current memory hierarchy, memsegs are groups of physically
contiguous hugepages, memzones are slices of memsegs and malloc further
slices memzones into smaller memory chunks.
This patch modifies malloc so it partitions memsegs instead of memzones.
Thus memzones would call malloc internally for memory allocation while
maintaining its ABI.
During initialization malloc sets all available memory as part of the heaps.
CONFIG_RTE_MALLOC_MEMZONE_SIZE was used to specify the default memory
block size to expand the heap. The option is not used/relevant anymore,
so we remove it.
Remove free_memseg field from internal mem config structure as it is
not used anymore.
Also remove code in ivshmem that was setting up free_memseg on init.
It would be possible to free memzones and therefore any other structure
based on memzones, ie. mempools
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Move malloc inside eal and create a new section in MAINTAINERS file for
Memory Allocation in EAL.
Create a dummy malloc library to avoid breaking applications that have
librte_malloc in their DT_NEEDED entries.
This is the first step towards using malloc to allocate memory directly
from memsegs. Thus, memzones would allocate memory through malloc,
allowing to free memzones.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The library name is now being pinned to "dpdk" instead of intel_dpdk,
powerpc_dpdk, etc. As a result, we no longer need this config item.
This patch removes it.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When a change makes really hard to keep ABI compatibility,
instead of waiting next release to break the ABI, it is smoother
to introduce the new code as a preview and disable it when packaging.
The flag RTE_NEXT_ABI must be used to "ifdef" the new code.
When the release is out, a dynamically linked application can use
the new shared libraries with the old ABI while developpers can prepare
their application for the next ABI by reading the deprecation notice
and easily testing the new code.
When starting the next release cycle, the "ifdefs" will be removed
and the ABI break will be marked by incrementing LIBABIVER. The map
files will also be updated.
The default value is enabled to be developer compliant.
The packagers must disable it as done in pkg/dpdk.spec.
When enabled, all shared library numbers are incremented by appending
a minor .1 to the old ABI number. In the next release, only impacted
libraries will have a major +1 increment.
The impacted libraries must provide an alternative map file to use
with this option.
The ABI policy is updated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch removes CONFIG_RTE_LIBRTE_EAL_HOTPLUG option, and enables it
as default in both Linux and BSD.
Also, to support port hotplug, rte_eal_pci_scan() and below missing
symbols should be exported to ethdev library.
- rte_eal_parse_devargs_str()
- rte_eal_pci_close_one()
- rte_eal_pci_probe_one()
- rte_eal_pci_scan()
- rte_eal_vdev_init()
- rte_eal_vdev_uninit()
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Adds cxgbe poll mode driver for DPDK under drivers/net/cxgbe directory.
This patch:
1. Adds the Makefile to compile cxgbe pmd.
2. Registers and initializes the cxgbe pmd driver.
Enable cxgbe PMD for compilation and linking with changes to:
1. config/common_linuxapp to add macros for cxgbe pmd.
2. drivers/net/Makefile to add cxgbe pmd to the compile list.
3. mk/rte.app.mk to add cxgbe pmd to link.
Update MAINTAINERS file to claim responsibility for the cxgbe PMD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
[Thomas: add disabled config for bsdapp]
On machines that are strict on pointer alignment, current code breaks
on GCC's -Wcast-align checks on casts from narrower to wider types.
This patch introduces new unaligned_uint(16|32|64)_t types, which
correctly retain alignment in such cases. Strict alignment
architectures will need to define CONFIG_RTE_ARCH_STRICT_ALIGN in
order to effect these new types.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds statistics collection for librte_pipeline.
Those statistics are disabled by default during build time.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added common data structures for port statistics.
Added config option to enable stats collecting.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The default value of RTE_MAX_QUEUES_PER_PORT is 256, which is too small
for some configurations for i40e. There will return an error when
configured queue number is larger than 256 in rte_eth_dev_configure().
For example, in vHost sample, PF queue number: 64,
configured vmdq pool number: 63, each vmdq pool has 4 queues,
there will be required 316 queues in a port.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The function name is printed in each enic_ethdev function.
Disable it by default with a new build option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Sujith Sankar <ssujith@cisco.com>
Reviewed-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE has no effect since this option enables
MLX4_PMD_COMPAT_VMWARE. This macro is not used by the PMD which expects
MLX4_COMPAT_VMWARE instead.
Because this option does not work and the related code is no longer useful
for VMware (as it actually supports the flow steering API), remove it
entirely.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The data structure for the rx and tx callbacks is local to each process
since it contains function pointers and cannot be shared between
different unique binaries. However, because it is not in
rte_eth_dev_data structure, the array is not getting initialized for
secondary processes - neither is it getting appropriately resized if the
number of RX/TX queues changes. This causes crashes in secondary
processes as they dereference a null pointer in struct rte_eth_dev.
This patch fixes this by introducing an upper-bound on the number of
queues per port that can be configured, and then uses this to make the
array statically sized, thereby avoiding the crashes.
Fixes: 4dc294158cac ("ethdev: support optional Rx and Tx callbacks")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Null PMD is a driver of the virtual device particularly designed to measure
performance of DPDK PMDs. When an application call rx, Null PMD just allocates
mbufs and returns those. Also tx, the PMD just frees mbufs.
The PMD has following options.
- size: specify packe size allocated by RX. Default packet size is 64.
- copy: specify 1 or 0 to enable or disable copy while RX and TX.
Default value is 0(disabled).
This option is used for emulating more realistic data transfer.
Copy size is equal to packet size.
To use the PMD, enable CONFIG_RTE_BUILD_SHARED_LIB in config file. Then
compile the PMD as shared library. The library can be linked using '-d'
option when an application invokes.
Here is an example.
$ sudo ./testpmd -c f -n 4 -d librte_pmd_null.so \
--vdev 'eth_null0' --vdev 'eth_null1' -- -i --no-flush-rx
If testpmd is compiled with CONFIG_RTE_BUILD_SHARED_LIB, it may need to
specify more libraries using '-d' option.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The patch adds functions for unmapping igb_uio resources. The patch is only
for Linux and igb_uio environment. VFIO and BSD are not supported.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
40) as well as their virtual functions in SR-IOV context through IB Verbs
(libibverbs) and the dedicated user-space driver (libmlx4).
It is disabled by default due to dependencies on these libraries and only
supports Linux userland at the moment partly because /sys (sysfs) support is
required.
Also claim responsibility in the MAINTAINERS file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
This library provide API to measure time spend in particular parts of
code and to calculate optimal polling time.
To calculate a those statistics application code need to be divided into
parts (called jobs) that do something. It is up to application to decide
what is considered a job.
Series of jobs must be surrounded with the rte_jobstats_context_start()
and rte_jobstats_context_finish() calls. After that, jobs might be
started. Each job must be surrounded with rte_jobstats_start() and
rte_jobstats_finish() calls.
After job finishes its execution, period in which it should be called
again is adjusted. It might be used to minimize time wasted on
unnecessary polls/calls. Adjustment is based on data provided by job
itself (ex: number of packets it processed).
After all jobs in serie are executed fallowing statistics are updated
and might be used by application. Statistics can be reset. Some of
provided statistic data:
- total/min/max execution - time spent in executing jobs.
- total/min/max management - time spent outside execution area. This
value might be used to measure overhead of scheduling jobs. This time
also contains overhead of rte_jobstats library itself.
- number of loops that executed at least one job
- executed jobs
- time when statistics were reset.
Each job provide total/min/max execution time and execution count
statistics.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add a sched_yield() syscall if the thread spins for too long,
waiting other thread to finish its operations on the ring.
That gives pre-empted thread a chance to proceed and finish
with ring enqueue/dequeue operation.
The purpose is to reduce contention on the ring.
By ring_perf_test, it doesn't shows additional perf penalty.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add optional support for inline processing of packets inside the RX
or TX call. For an RX callback, what happens is that we get a set of
packets from the NIC and then pass them to a callback function, if
configured, to allow additional processing to be done on them, e.g.
filling in more mbuf fields, before passing back to the application.
On TX, the packets are similarly post-processed before being handed
to the NIC for transmission.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch add some debug information when using link bonding mode 6.
It prints basic information about ARP packets on RX and TX (MAC, ip,
packet number, arp packet type).
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB == y.
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1 is enabled instead of previous
one, use show command to see IPv4 balancing from clients.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This library provides reordering capability for out of order mbufs based
on a sequence number in the mbuf structure.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Richardson Bruce <bruce.richardson@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
1. Add init function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
fm10k_stats_get.
4. Add fm10k.h to define macros and basic data structure.
5. Add fm10k_logs.h to control log message output.
6. Change config/common_bsdapp and config/common_linuxapp, add
macros to control fm10k pmd driver compile for linux and bsd.
7. Add Makefile.
8. Change lib/Makefile to add fm10k driver into compile list.
9. Change mk/rte.app.mk to add fm10k lib into link.
10. Add ABI version of librte_pmd_fm10k
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
This is a duplication of some EAL parts for a standalone packaging
which is not documented.
Packaging should be done outside of DPDK.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: enable for BSD - not tested]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
New platforms have more than 64 cores.
Set default max cores number to 128.
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove 'CONFIG_RTE_LIBRTE_I40E_PF_DISABLE_STRIP_CRC'
from config files, as nowhere uses it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The change includes several parts:
1. Get maximum number of VMDQ pools supported in dev_init.
2. Fill VMDQ info in i40e_dev_info_get.
3. Setup VMDQ pools in i40e_dev_configure.
4. i40e_vsi_setup change to support creation of VMDQ VSI.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
No need to restrict usage of non Intel SFP.
If (hw->phy.type == ixgbe_phy_sfp_intel) is false,
a warning will be logged.
It was disabled for ixgbe and enabled but unused for i40e.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Remove useless include that broke compilation and
allow to use it with nic_uio in FreeBSD.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Alan Carew <alan.carew@intel.com>
Add compilation support for clang on Linux and FreeBSD.
clang is the default compiler on FreeBSD 10.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
[Thomas: update comments]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add some missing options (disabled) and disable i40e debug.
Reported-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
