Add helper functions to get meta len for asymmetric operations
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kanaka Durga Kotamarthy <kkotamarthy@marvell.com>
Signed-off-by: Sunila Sahu <ssahu@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The session related parameters shall be populated during
the session create only.
At the runtime on first packet, the CDB should just reference
the session data instead of re-interpreting data again.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for ZUC and SNOW 3G in
non-PDCP offload mode.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For cases like ESN where authentication data can be after cipher
data, support for authentication trailer is required.
This patch adds support of auth-only data trailing after cipher data.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The GCM descriptors needlessly skip auth_only_len bytes from output
buffer. Due to this, workarounds have to be made in dpseci driver code.
Also this leads to failing of one cryptodev test case for gcm. In this
patch, we change the descriptor construction and adjust dpaaX_sec
accordingly. The test_AES_GCM_auth_encrypt_SGL_out_of_place_400B_1seg
now passes.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The code shall also check aead as non auth-cipher case
Fixes: 1f14d500bce1 ("crypto/dpaa_sec: support IPsec protocol offload")
Cc: stable@dpdk.org
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The black list of dpaa_sec devices fails.
EAL: failed to parse device "dpaa:dpaa_sec-1"
This patch address following issues:
- bus usages dpaa-sec while the driver usage dpaa_sec
- bus usages numbers from 0 to MAX_SEC - while driver
probe usages sec number form max-fman_device +1
Fixes: 6e0752205bb2 ("bus/dpaa: support device blacklisting")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
dpaa_sec hw queues can be attached to a hw dpaa event
device and the application can configure the event
crypto adapter to access the dpaa_sec packets using
hardware events.
This patch defines APIs which can be used by the
dpaa event device to attach/detach dpaa_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
'cpt_logtype' & 'otx_cryptodev_driver_id' global variables are defined
in a header file which was causing multiple definitions of the
variables. Fixed it by moving the required vars to the .c file and
introducing a new macro so the CPT_LOG macros in common/cpt would use
the associated PMD log var.
Issue has been detected by '-fno-common' gcc flag.
Fixes: bfe2ae495ee2 ("crypto/octeontx: add PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
It's better to allocate device private data on the same NUMA node with
device, rather than with the main thread. This helps avoid cross-NUMA
access for worker thread.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Jay Zhou <jianjay.zhou@huawei.com>
This patch improves the performance of AES GCM by using
the Single Pass Crypto Request functionality when running
on GEN3 QAT. Falls back to the classic 2-pass mode on older
hardware.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
unnecessary debug logs in data path are removed
and hardware debug logs are compiled off.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In cases where single cryptodev is used by multiple cores
using multiple queues, there will be contention for mempool
resources and may eventually get exhausted.
Basically, mempool should be defined per core.
Now since qp is used per core, mempools are defined in qp setup.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch allocate/clean the SEC context dynamically
based on the number of SG entries in the buffer.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPAA2_SEC hardware can support any number of SG entries.
This patch allocate as many SG entries as are required.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for ZUC Encryption and ZUC Authentication.
Before passing to CAAM, the 16-byte ZUCA IV is converted to 8-byte
format which consists of 38-bits of count||bearer|direction.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add Kasumi processing for non PDCP proto offload cases.
Also add support for pre-computed IV in Kasumi-f9
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Adding basic framework to use snow3g f8 and f9 based
ciphering or integrity with direct crypto apis.
This patch does not support any combo usages yet.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for snow-f9 in non pdcp protocol offload mode.
This essentially add support to pass pre-computed IV to SEC.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for non-protocol offload mode
of snow-f8 algo
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch support SNOW-SNOW (enc-auth) 18bit PDCP case
for devices which do not support PROTOCOL command
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch support ZUC-ZUC PDCP enc-auth case for
devices which do not support PROTOCOL command for 18bit.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch support AES-AES PDCP enc-auth case for
devices which do not support PROTOCOL command for 18bit
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
PDCP descriptors in some cases internally use commands which overwrite
memory with extra '0s' if write-safe is kept enabled. This breaks
correct functional behavior of PDCP apis and they in many cases give
incorrect crypto output. There we disable 'write-safe' bit in FLC for
PDCP cases. If there is a performance drop, then write-safe would be
enabled selectively through a separate patch.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for chained input or output
mbufs for PDCP and ipsec protocol offload cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
For sec era 8, NULL auth using protocol command does not add
4 bytes of null MAC-I and treat NULL integrity as no integrity which
is not correct.
Hence converting this particular case of null integrity on 12b SN
on SEC ERA 8 from protocol offload to non-protocol offload case.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Adding minimal support for CAAM HW era 10 (used in LX2)
Primary changes are:
1. increased shard desc length form 6 bit to 7 bits
2. support for several PDCP operations as PROTOCOL offload.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Per packet HFN override is supported in NXP PMDs
(dpaa2_sec and dpaa_sec). DPOVRD register can be
updated with the per packet value if it is enabled
in session configuration. The value is read from
the IV offset.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
PDCP u-plane may optionally support integrity as well.
This patch add support for supporting integrity along with
confidentiality.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Added support for 12-bit c-plane. We implement it using 'u-plane for RN'
protocol descriptors. This is because 'c-plane' protocol descriptors
assume 5-bit sequence numbers. Since the crypto processing remains same
irrespective of c-plane or u-plane, we choose 'u-plane for RN' protocol
descriptors to implement 12-bit c-plane. 'U-plane for RN' protocol
descriptors support both confidentiality and integrity (required for
c-plane) for 7/12/15 bit sequence numbers.
For little endian platforms, incorrect IV is generated if MOVE command
is used in pdcp non-proto descriptors. This is because MOVE command
treats data as word. We changed MOVE to MOVEB since we require data to
be treated as byte array. The change works on both ls1046, ls2088.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
outer IP header is formed at the time of session initialization
using the ipsec xform. This outer IP header will be appended by
hardware for each packet.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
outer IP header is formed at the time of session initialization
using the ipsec xform. This outer IP header will be appended by
hardware for each packet.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Like for Ethernet ports, the OCTEON TX crypto engines must
first be unbound from their kernel module, then rebound to
vfio-pci, before being used in DPDK.
As this capability is detected at runtime by dpdk-pmdinfo,
add the info in the PMD registering directives.
Then an external script can be used for bind and unbind.
Fixes: bfe2ae495ee2 ("crypto/octeontx: add PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
