strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previous ungraceful exit may leave behind un-acked stale
interrupts for slowpath and fastpath.
Interrupt status polling function is started before FLR is
initiated, so we don't have a real way to protect this polling
function invoking an interrupt handler caused due to stale
interrupt status from previous ungraceful exit.
So, check uninitialized status block variables in interrupt
handling path which may lead to segfault.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Whenever possible (if the library ships a pkg-config file) use meson's
dependency() function to look for it, as it will automatically add it
to the Requires.private list if needed, to allow for static builds to
succeed for reverse dependencies of DPDK. Otherwise the recursive
dependencies are not parsed, and users doing static builds have to
resolve them manually by themselves.
When using this API avoid additional checks that are superfluous and
take extra time, and avoid adding the linker flag manually which causes
it to be duplicated.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Reduced number of INFO logs in BNX2X PMD by converting some INFO
logs to DEBUG and few NOTICE logs to INFO, removing extra new lines,
printing banner bar once for the adapter and device specific info.
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
In general the VF driver should not access the chip. For VF link status
update, VF driver should not use HW lock, use bnx2x_link_report_locked()
instead.
Add few prints for releasing previously held HW locks.
Fixes: a9b58b15ed ("net/bnx2x: fix to add PHY lock")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Use rte_log() rather than RTE_LOG() for dynamic logging. Rearrange
dynamic log types to the top and configurable log types to bottom.
Remove unused RTE_LIBRTE_BNX2X_DEBUG_TX_FREE
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The helper rte_eth_dma_zone_reserve() is called by PMDs
when probing a new port.
It creates a new memzone with an unique name.
The name of this memzone was using the name of the driver
doing the probe.
In order to avoid assigning the driver before the end of the probing,
the driver name is removed from these memzone names.
The ethdev name (data->name) is not used because it may be too long
and may be not set at this stage of probing.
Syntax of old name: <driver>_<ring>_<port>_<queue>
Syntax of new name: eth_p<port>_q<queue>_<ring>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds phy_lock, acquire/release the lock when performing
PHY transactions. Without this fix driver can run into synchronization
issues with management FW when modifying PHY settings.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
If link handling periodic function is allowed to be called in interrupt
context, the periodic function can get called too frequently and exhaust
the retry credits to check link status.
This change makes sure link handling periodic function is not called in
interrupt context.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to disable further fastpath/slowpath interrupts. These will be
enabled again by their respective handlers
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix PMD logging scheme to include device name in the messages printed.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
We were using LICENSE.bnx2x_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.bnx2x_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Originally the PMD had "QLogic Corporation" copyright. When we submitted
commit e3de5dad2a ("net/bnx2x: change copyright info to Cavium"),
the "Qlogic Corporation" copyright was accidentally replaced
with "Cavium Inc". So now we see multiple Cavium copyright messages.
We're changing it to "Broadcom Corporation" copyright.
Fixes: e3de5dad2a ("net/bnx2x: change copyright info to Cavium")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The PMD has been modified to invoke the polling function in the link
management code which detects the peer speed/mode, configure the link
and update the status accordingly. This patch is the fix for the link
down issue seen when we do dev_stop() and dev_start() from an
application.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch fixes firmware command timeout error seen during device stop
while stopping queues. It patially reverts an earlier preventive change
commit 91b7e432bc ("net/bnx2x: disable fast path interrupts") to now
enable fast path interrupts.
The original issue of performance degradation is not observed anymore,
with or without the fix.
Fixes: 91b7e432bc ("net/bnx2x: disable fast path interrupts")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
In function ‘elink_check_kr2_wa’:
drivers/net/bnx2x/elink.c:12922:28:
error: bitwise comparison always evaluates to false
[-Werror=tautological-compare]
((next_page & 0xe0) == 0x2))));
This was fixed elsewhere in 2014
Fixes: b5bf771922 ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
This is stopping the compiler telling you when you have
done something stupid... that is something none of us
can afford...
Now gcc 8.x can tell you did something stupid despite
trying to hide the evidence.
Remove all the "black magic" casts.
Fix the actual problems.
Fixes: b5bf771922 ("bnx2x: driver support routines")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
The drivers avp, bnx2x and liquidio were using the helper function
rte_eth_dev_pci_allocate() and can be replaced by
rte_eth_dev_pci_generic_probe() which calls the former.
Fixes: dcd5c8112b ("ethdev: add PCI driver helpers")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
When allocating a new mbuf for Rx, the value of m->data_off should be
reset to its default value (RTE_PKTMBUF_HEADROOM), instead of reusing
the previous undefined value, which could cause the packet to have a
too small or too high headroom.
Signed-off-by: Yangchao Zhou <zhouyates@gmail.com>
Acked-by: Harish Patil <harish.patil@cavium.com>
This patch provides a fix for PCI function level reset after an
ungraceful exit from an application. The fix is to enable internal
target read as part of device attach before getting device information
from device config space, device itself and shared memory. In addition
to that, add a 200ms delay for the recovery flow to complete.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
With icc (ICC) 18.0.1 20171018, -wd usage generates following warning:
icc: command line remark #10010: option '-wd3656' is deprecated and will
be removed in a future release. See '-help deprecated'
"icc -help deprecated" output is:
-wd use -diag-disable
Based on above information "-wd" converted to "-diag-disable"
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Ethdev RX offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This patch makes use of DEV_RX_OFFLOAD_JUMBO_FRAME offload flag
to advertise jumbo frame support.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
