Testpmd would stuck and result in core dump when user specifies an
invalid VF queue number, for example when setting txq or rxq to 0.
When txq or rxq is set to 0, pointer of pointer rxq or txq in
function i40evf_configure_vsi_queues is NULL. The usage of txq[i]
or rxq[0] is valid. This patch fixes this issue.
Fixes: d6b1972909 ("i40evf: support configurable crc stripping")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default policy for offload-specific fields is that
they are undefined unless the corresponding offloads are
requested in mbuf ol_flags. This is also the case for outer
L2 and L3 length fields which must not be assumed to contain
zeros for non-tunnel packets. The patch clarifies this behaviour
in the comments and also adds appropriate checks to the PMDs which
do not check any tunnel-related offloads before using the said fields.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If we don't clear mac_addrs, ethdev will double free it on cleanup.
Fixes: e16adf08e5 ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This driver was inserting its own stub for queue_stats_mapping which
did nothing but cause this device to return a different errno
than every other device driver. All devices that don't implement
queue stats mapping should return the same error.
Maybe the plan originally was to implement something, if that
ever happens, just put in the right code.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
i40e and i40evf currently use two different names for the statistic on
dropped packets on the rx and tx sides.
Let's prefer i40evf so that all statistics are suffixed with _packets.
This also avoids a statistic name conflict in OVS.
Fixes: f4a91c38b4 ("i40e: add extended stats")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Initializes mark_spec pointer to NULL.
Coverity issue: 341075
Fixes: 0bbcfc706a ("net/i40e: support MARK and RSS flow action")
Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Use of weak symbols can hide makefile errors especially when
custom makefiles are used. Removing the use of weak symbols
to avoid a stub function being linked in production code.
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The device private pointer (dev_private) is of type void *
therefore no cast is necessary in C.
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
To improve code quality we want to turn on as many warnings as we can in
the DPDK code, so turn on the "unused-parameter" warning in meson builds to
match that of the make builds. To ensure correct compilation, disable the
warning selectively for driver base code that otherwise would have issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Currently, i40e Flow Director action parser only allows following nine
action combinations: (QUEUE, PASSTHRU, DROP, QUEUE + MARK, PASSTHRU +
MARK, DROP + MARK, QUEUE + FLAG, PASSTHRU + FLAG, DROP + FLAG)
Using the existing Cloud Filter profile on the NIC, it is possible to
add support for two more combinations as: (MARK + RSS, MARK + FLAG +
RSS)
Addition of these new combinations would allow more applications to
utilize DPDK rte_flow to implement hardware flow offloads with Intel
Ethernet 700 series network adapters, including but not limited to the
existing OVS DPDK partial hardware flow offload feature.
Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tx desc's DD status is not cleaned by NIC automatically after packets
have been transmitted until software refill a new packet during next
loop. So when tx_free_thresh + tx_rs_thresh > nb_desc, it is possible
that an outdated DD status be checked as tx_next_dd, then segment fault
happen due to free a NULL mbuf pointer.
Then patch fixes this issue by
1. try to adapt tx_rs_thresh to an aggressive tx_free_thresh.
2. queue setup fail when tx_free_thresh + tx_rs_thresh > nb_desc
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Refuse to create the second RSS flow rule as only one RSS key and
HASH register for each PF port. Users should delete the first rule
before setup the second rule.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Wenjie Li <wenjiex.a.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
New PCI device ids are created to support X710/XXV710 of Intel FPGA
Programmable Acceleration card N3000, also called ipn3ke.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If disable LSC when launching testpmd with X722, shown
link speed is 20G but not 10G. It's caused by wrongly
parsed link speed.
Correct it according to X722 datasheet.
Fixes: eef2daf2e1 ("net/i40e: fix link update no wait")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
As flagged by coverity, the "info" structure is being explicitly
dereferenced before being checked later for a NULL value.
Coverity issue: 277241
Fixes: 98e60c0d43 ("net/i40e: add module EEPROM callbacks for i40e")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
Coverity flags that the txq variable is used before it's checked for NULL.
Also fix typo in error message.
Coverity issue: 195023
Fixes: 24853544c8 ("net/i40e: fix mbuf free in vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When launch testpmd with VF and quit testpmd, there'll
be lots of messages "i40evf_handle_aq_msg(): Request 0
is not supported yet", which are triggered during VF
reset and VF needn't do anything. So cancel alarm handler
before VF reset to ignore the admin queue messages.
Fixes: e0e6a7f215 ("net/i40e: cancel alarm handler at the end of closure")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
No need to add additional vlan tag size for max packet size, since
for i40e, the queue's Rx Max Frame Size (rxq->max_pkt_len) already
includes the vlan header size.
Fixes: a3c83a2527 ("net/i40e: enable runtime queue setup")
Fixes: 4861cde461 ("i40e: new poll mode driver")
Fixes: c1715402df ("i40evf: fix jumbo frame support")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add new protocol type VXLAN-GPE support for UDP tunnel.
inner IP/TCP/UDP checksum and RSS configuration shared
the same implementation of VXLAN.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit sets the min and max supported MTU values for i40e VF
devices via the i40evf_dev_info_get() function. Min MTU supported
is set to ETHER_MIN_MTU and max MTU is calculated as the max packet
length supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e devices
via the i40e_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A log message is required when provided RSS key is
not valid so that driver will use the default RSS key.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Time sync increment value is not configured for 25G device.
The patch fix this issue by setting the same value as 40G, this
aligned with kernel driver's behaviour.
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Cc: stable@dpdk.org
Reported-by: Michael Luo <michael.luo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Michael Luo <michael.luo@intel.com>
Since rounding up the requested queue pairs to allow the VF to
request a non-aligned number was added, it may happen that the
requested number is less than the available num of queues but the
rounded up number is greater. In this case, it is not caught with
the usual checks but later when there is a reset and failed setup.
By rounding earlier the checks can be done before a failed reset
occurs, and a rounded max amount of available queues can be returned
to the VF.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the check and associated log. Also, fix a typo in other log.
Fixes: 03d478e960 ("net/i40e: support PF respond VF request more queues")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1. Fix the lldp stop condition check - for firmware
versions 6.01(for X710)/3.33(for X722) or later we need stop the lldp
2. deferred stats reset in dev_init to avoid some noise be counted.
3. Document known issue for tx bytes decreasing due to link status change
Fixes: 044846f071 ("net/i40e: stop LLDP before setting local LLDP MIB")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DCB is not necessary to be configured if no user priority of
queue region is requested.
Unexpected configuration of DCB will cause unexpected behavior, like
FDIR does not work on those queues, but could cause more issues.
Fixes: 7cbecc2f74 ("net/i40e: support queue region set and flush")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, VF must request a specific queues(1/2/4/8/16) with
DPDK PF. This patch align the number of requested queues to next power
of 2. So VF can request any number queues from 1 to 16.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
i40e_aq_set_rss_lut should set register according
to the vsi->type. if not, VF may overwrite the rigister
of PF.
Note, only X722 is impacted, since flag I40E_FLAG_RSS_AQ_CAPABLE
is only enabled on X722.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Do the VF message basic validation such as OPCODE message length check,
some special OPCODE message format check, to protect the i40e PMD from
malicious VF message attack.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
