Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Some variables are commented out. Remove them.
Fixes: d548ef513cd7 ("event/opdl: add unit tests")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
During LTO build compiler reports some 'false positive' warnings about
variables being possibly used uninitialized. This patch silences these
warnings.
Exemplary compiler warning to suppress (with LTO enabled):
error: ‘chunk’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
bkt->current_chunk = (uintptr_t)chunk;
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Use WFE to save power while waiting for tag to become head.
SSO signals EVENTI to allow cores to exit from wfe when they
are waiting for specific operations in which one of them is
setting HEAD bit in GWS_TAG.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the support of Tx adapter for DPAA2 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch sets the priority of the dpcon dev, such that it is
within the supported range of dpcon
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds the support of Tx adapter for DPAA1 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The number of atomic flows supported was not returned correctly for
DPAA driver. This patch fixes the same.
Fixes: b08dc6430abd ("event/dpaa: add queue config get/set")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch introduces a `flag` in the Eth TX adapter enqueue API.
Some drivers may support burst functionality only with the packets
having same destination device and queue.
The flag `RTE_EVENT_ETH_TX_ADAPTER_ENQUEUE_SAME_DEST` can be used
to indicate this so the underlying driver, for drivers to utilize
burst functionality appropriately.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for testing dpaa2 eventdev self test
for basic sanity for parallel and atomic queues.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The patch adds the break in the TX function, if it is failing
to send the packets out. Previously the system was trying
infinitely to send packet out.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch removes the conditional compilation for
cryptodev event support from RTE_LIBRTE_SECURITY flag.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Test vector expect only one type of scheduling as default.
The old code is provide support scheduling types instead of default.
Fixes: 13370a3877a5 ("eventdev: fix inconsistency in queue config")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Octeontx2 SSO co-processor allows multiple ethernet device Rx queues
connected to a single Event device queue.
Fix the Rx adapter capabilities to allow application to configure
Rx queueus in n:1 ratio to event queues by adding
`RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ` as a capability.
Fixes: 37720fc1fba8 ("event/octeontx2: add Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The sw PMD implements xstats reset by having the xstat get operations
return a value to the statistic's value at the last reset. The value at the
last reset is maintained in the per-xstat reset_value field, but the PMD
was setting reset_value = current - reset_value instead of reset_value =
current.
Fixes: c1ad03df7ad5 ("event/sw: support xstats")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add support to below TCP segmentation offloads for
96XX A1 onwards and 95xx B0 onwards.
- TCPv4, TCPv6
- VXLAN[v4 | v6][v4 | v6]
- GENEVE[v4 | v6][v4 | v6]
This patch also modifies a fastpath function to be forced
inline due to performance reasons for multi-seg mode.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
event dpaa device support both ethernet as well as
crypto queues to be attached to it. eth_rx_adapter
provide infrastructure to attach ethernet queues and
crypto_adapter provide support for crypto queues.
This patch add support for dpaa_eventdev to attach
dpaa_sec queues.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Restrict this header inclusion to its real users.
Fixes: 028669bc9f0d ("eal: hide shared memory config")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
A huge drop in per core MPPS value was observed when PTP stack is
enabled. The reason behind the bottleneck is HW serialises the
transfer of all SQEs, which seeks timestamp capture, on the same
send DMA path. Hence only those packets which requires timestamp
capture should set SETTSTAMP in send mem alg.
With this patch timestamping would be done only for those packets
with PKT_TX_IEEE1588_TMST set.
Fixes: fb3ae0951abd ("net/octeontx2: support Tx")
Fixes: 8980a153006b ("event/octeontx2: support PTP for SSO")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In order to align name with other PCI driver flag such as
RTE_PCI_DRV_NEED_MAPPING and to reflect its purpose, change
RTE_PCI_DRV_IOVA_AS_VA flag name as RTE_PCI_DRV_NEED_IOVA_AS_VA.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add PTP support for SSO based on rx_offloads of the queue connected to
it.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Fixes: 371a688fc159 ("event/sw: support linking queues to ports")
Cc: stable@dpdk.org
Signed-off-by: Dilshod Urazov <dilshod.urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The functions rte_service_may_be_active(), rte_service_lcore_attr_get(),
and rte_service_attr_reset_all() were introduced nearly a year ago in DPDK
18.08. They can be considered non-experimental for the 19.08 release.
rte_service_may_be_active() is used by the sw PMD, and this commit allows
it to not need any experimental API.
Signed-off-by: Gage Eads <gage.eads@intel.com>
When compiling with clang on 32-bit platforms, we are missing
copies of 64-bit atomic functions. We can solve this by linking
against libatomic for the drivers and libs which need those
atomic ops.
Fixes: f0b9982cb3a7 ("event/octeontx2: add TIM bucket operations")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs to control each event timer adapter i.e. TIM rings internal
parameters uniquely. The following dict format is expected
[ring-chnk_slots-disable_npa-stats_ena]. 0 represents default values.
Example:
--dev "0002:0e:00.0,tim_ring_ctl=[2-1023-1-0]"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs to limit the max number of TIM rings reserved on probe.
Since, TIM rings are HW resources we can avoid starving other
applications by not grabbing all the rings.
Example:
--dev "0002:0e:00.0,tim_rings_lmt=2"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add event timer adapter statistics get and reset functions.
Stats are disabled by default and can be enabled through devargs.
Example:
--dev "0002:0e:00.0,tim_stats_ena=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add event timer arm timeout burst function.
All the timers requested to be armed have the same timeout.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add internal SSO functions to allow event adapters to resize SSO buffers
that are used to hold in-flight events in DRAM.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add devargs support to modify number of chunk slots. Chunks are used to
store event timers, a chunk can be visualised as an array where the last
element points to the next chunk and rest of them are used to store
events. TIM traverses the list of chunks and enqueues the event timers
to SSO.
If no argument is passed then a default value of 255 is taken.
Example:
--dev "0002:0e:00.0,tim_chnk_slots=511"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
If the chunks are allocated from NPA then TIM can automatically free
them when traversing the list of chunks.
Add devargs to disable NPA and use software mempool to manage chunks.
Example:
--dev "0002:0e:00.0,tim_disable_npa=1"
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Allow TIM to optimize user supplied configuration based on
RTE_EVENT_TIMER_ADAPTER_F_ADJUST_RES flag.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
When the application calls timer adapter create the following is used:
- Allocate a TIM lf based on number of lf's provisioned.
- Verify the config parameters supplied.
- Allocate memory required for
* Buckets based on min and max timeout supplied.
* Allocate the chunk pool based on the number of timers.
On Free:
- Free the allocated bucket and chunk memory.
- Free the TIM lf allocated.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
