This patch changes the get info operation to be implemented through
filter_ctrl API and RTE_ETH_FILTER_INFO/RTE_ETH_FILTER_STATS ops.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch implement the mask configuration of flow director filter,
by using the mask defined in rte_fdir_conf instead of callback function
fdir_set_masks.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch removes the flexbytes_offset from rte_fdir_conf, because
the flexible payload setting is done by flex_conf instead of flexbytes_offset.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch implement the flexpayload configuration of flow director filter.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds RTE_ETH_FLOW_TYPE_RAW and RTE_ETH_RAW_PAYLOAD to support the
flexible payload is started from the beginning of the packet.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch changes the add/delete/update operations to be implemented through
filter_ctrl API and RTE_ETH_FILTER_ADD/RTE_ETH_FILTER_DELETE/RTE_ETH_FILTER_UPDATE ops.
It also removes the callback functions:
- ixgbe_eth_dev_ops.fdir_add_signature_filter
- ixgbe_eth_dev_ops.fdir_update_signature_filter
- ixgbe_eth_dev_ops.fdir_remove_signature_filter
- ixgbe_eth_dev_ops.fdir_add_perfect_filter
- ixgbe_eth_dev_ops.fdir_update_perfect_filter
- ixgbe_eth_dev_ops.fdir_remove_perfect_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
enable/disable interrupt by manipulating a control bit of command
register on NIC's PCIe configuration space.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Tested-by: Qun Wan <qun.wan@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Change the EAL PCI code so that it can work with both the
uio_pci_generic in-tree driver, as well as the igb_uio
DPDK-specific driver.
This involves changes to
1) Modify method of retrieving BAR resource mapping information
2) Mapping using resource files in /sys rather than /dev/uio*
2) Setup bus master bit in NIC's PCIe configuration space for
uio_pci_generic.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch modify mode older name from
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING to BONDING_MODE_TLB
This patch also changes order of TEST_ASSERT macro in
test_tlb_verify_slave_link_status_change_failover.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch add some debug information when using link bonding mode 6.
It prints basic information about ARP packets on RX and TX (MAC, ip,
packet number, arp packet type).
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB == y.
If CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1 is enabled instead of previous
one, use show command to see IPv4 balancing from clients.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This mode includes adaptive TLB and receive load balancing (RLB). In RLB
the bonding driver intercepts ARP replies send by local system and
overwrites its source MAC address, so that different peers send data to
the server on different slave interfaces. When local system sends ARP
request, it saves IP information from it. When ARP reply from that peer
is received, its MAC is stored, one of slave MACs assigned and ARP reply
send to that peer.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Changed MAC address type from uint8_t[6] to struct ether_addr and IP
address type from uint8_t[4] to uint32_t to make it consistent with
other DPDK code using MAC and IP addresses. It allows us to use
is_same_ether_addr and ether_addr_copy functions on MAC addresses in ARP header. Also
removed union from arp_hdr struct to make calls to arp_data items
shorter. Updated test-pmd to match new arp_hdr version.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
[Thomas: doxygenize comments]
Remove those hotspots which is unnecessary when early returning occurs.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Make virtio not require UIO for some security reasons, this is to match
6WIND's virtio-net-pmd.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
This makes virtio driver work like ixgbe. Transmit buffers are
held until a transmit threshold is reached. The previous behavior
was to hold mbuf's until the ring entry was reused which caused
more memory usage than needed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Need to have do special things to set default mac address.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Change order of initialization to match Linux kernel.
Don't blow away control queue by doing reset when stopped.
Calling dev_stop then dev_start would not work.
Dev_stop was calling virtio reset and that would clear all queues
and clear all feature negotiation.
Resolved by only doing reset on device removal.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
To keep the consistent logic with normal Rx path, the mergeable
Rx path also needs software vlan strip/decap if it is enabled.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Implement VLAN stripping in software. This allows application
to be device independent.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
It is helpful to allow device drivers that don't support hardware
VLAN stripping to emulate this in software. This allows application
to be device independent.
Avoid discarding shared mbufs. Make a copy in rte_vlan_insert() of any
packet to be tagged that has a reference count > 1.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Since vq_alignment is constant (always 4K), it does not
need to be part of the vring struct.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Virtio has link state interrupt which can be used.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Starting driver with link down should be ok, it is with every
other driver. So just allow it.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Updating the vring descriptor index should be done before notifying host;
Remove 2 duplicated store memory barriers in both Rx and Tx path because there is
store memory barrier in vq_update_avail_idx function;
Notify the host only if packets actually transmitted(nb_tx > 0).
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
The DPDK driver only has to deal with the case of running on PCI
and with SMP. In this case, the code can use the weaker barriers
instead of using hard (fence) barriers. This will help performance.
The rationale is explained in Linux kernel virtio_ring.h.
To make it clearer that this is a virtio thing and not some generic
barrier, prefix the barrier calls with virtio_.
Add missing (and needed) barrier between updating ring data
structure and notifying host.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Better to check at compile time than fail at runtime.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Make vtpci_get_status a local function as it is used in one file.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
For clarity make the setup of PCI resources for Linux into a function rather
than block of code #ifdef'd in middle of dev_init.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Eliminate ambiguity in the condition which trips up a "logical not
is only applied to the left..." warning from gcc 5, causing build
failure with -Werror. Besides non-ambiguous, the condition is
far more obvious this way.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC is a prerequisite
of CONFIG_RTE_IXGBE_INC_VECTOR.
Reported-by: Alexander Belyakov <abelyako@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When the vector pmd was receiving a mix of packets of various sizes,
some of which were split across multiple mbufs, there was an issue
with reassembly of the jumbo frames. This was due to a skipped increment
when using "continue" in a while loop. Changing the loop to a "for"
loop fixes this problem, by ensuring the increment is always performed.
Reported-by: Prashant Upadhyaya <praupadhyaya@gmail.com>
Reported-by: Martin Weiser <martin.weiser@allegro-packets.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Martin Weiser <martin.weiser@allegro-packets.com>
ixgbe is little endian, but cpu maybe not.
add necessary conversions.
rte_cpu_to_le_32(...) for PCI write
rte_le_to_cpu_32(...) for PCI read.
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
e1000 is little endian, but cpu maybe not.
add necessary conversions.
rte_cpu_to_le_32(...) for PCI write
rte_le_to_cpu_32(...) for PCI read.
Signed-off-by: Xuelin Shi <xuelin.shi@freescale.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Variables are unsigned int but format scans for signed int.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Building shared libraries and using virtio PMD results in undefined
reference to 'rte_eal_iopl_init'.
Add missing function to eal version map.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The argument ressize contains the size of the result buffer which
should be large enough to store the parsed result of a token. In
this case, it should be larger or equal to sizeof(cmdline_portlist_t)
(4 bytes), not PORTLIST_TOKEN_SIZE which is the max size of the token
string.
This is not a critical, it fixes cases where the total length of the
parsed instruction is greater than the maximum.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
rte_eth_bond_8023ad_setup and rte_eth_bond_8023ad_conf_get entries need
to be exported to be used by test application for shared libraries
compilation.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Link up and down implementation.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
rte_eth_stats_get is to get physical device statistics. Without
return status, caller does not know whether function fails or not
(i.e. invalid port_id, driver has no stats_get callback). Caller
cannot differiente normal 0 stats or error case. This fix adds
a return status to the function.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Since LSR interrupt is disabled by pmd drivers, link status in rte_eth_device is always down.
Bond slave_configure() enables LSR interrupt on devices to get notification if link status
changes. However, the LSC interrupt at device start time is still lost.
In this fix, call link_update to read link status from hardware
register at device start time.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This library provides reordering capability for out of order mbufs based
on a sequence number in the mbuf structure.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Richardson Bruce <bruce.richardson@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
