Add options to set mbuf size and max packet size which allow the user to
enable jumbo frames and Rx/Tx scatter gather.
Arrange `struct evt_options` based on ascending order of data type to
make it more readable.
Packet mbuf size can be modified by using `--mbuf_sz=N`.
Max packet size can be modified by using `--max_pkt_sz=N`.
These options are only applicable `pipeline_atq` and `pipeline_queue`
tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The hardware may have limitations on maximal amount of
supported Tx descriptors building blocks (WQEBB). Application
requires the Tx queue must accept the specified amount of packets.
If inline data feature is engaged the packet may require more WQEBBs
and overall amount of blocks may exceed the hardware capabilities.
Application has to make a trade-off between Tx queue size and maximal
data inline size.
In case if the inline settings are not requested explicitly with
devarg keys the default values are used. This patch adjusts the
applied default values if large Tx queue size is requested and
default inline settings can not be satisfied due to hardware
limitations.
The explicitly requested inline setting may be aligned (enlarging
only) by configurations routines to provide better WQEBB filling,
this implicit alignment is the subject for adjustment either.
The warning message is emitted to the log if adjustment happens.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use latest firmware 7.13.11.
7.13.11 FW changelog:
- Packets from a VF with pvid configured which were sent with a
different vlan were transmitted instead of being discarded.
- In some multi-function configurations, inter-PF and inter-VF
Tx switching is incorrectly enabled.
- Wrong assert code in FLR final cleanup in case it is sent not
after FLR.
- Chip may stall in very rare cases under heavy traffic with FW GRO
enabled.
- VF malicious notification error fixes.
- Default gre tunnel to IPGRE which allows proper RSS for IPGRE
packets, L2GRE traffic will reach single queue.
- Removes unnecessary internal mem config, latest FW performs this
autonomously.
Update the PMD version to 1.1.0.1.
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Add support to below TCP segmentation offloads for
96XX A1 onwards and 95xx B0 onwards.
- TCPv4, TCPv6
- VXLAN[v4 | v6][v4 | v6]
- GENEVE[v4 | v6][v4 | v6]
This patch also modifies a fastpath function to be forced
inline due to performance reasons for multi-seg mode.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Adding support for tx descriptor status dev ops for octeontx2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When we need particular number of packets from the rx routine,
which would change in every call, we cannot prefetch the packets
and provide previous results to the user.
User can select the mode by using devargs for non prefetch mode.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The black list of dpaa_sec devices fails.
EAL: failed to parse device "dpaa:dpaa_sec-1"
This patch address following issues:
- bus usages dpaa-sec while the driver usage dpaa_sec
- bus usages numbers from 0 to MAX_SEC - while driver
probe usages sec number form max-fman_device +1
Fixes: 6e0752205bb2 ("bus/dpaa: support device blacklisting")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Sachin Saxena <sachin.saxena@nxp.com>
The legacy filter API "flow director" has been superseded by rte_flow
since 2017. Remove comments in the enic guide regarding the deprecated
feature.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
This patch adds command line support for Symmetric Toeplitz
hash configuration.
Signed-off-by: Simei Su <simei.su@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Remove compile time option to control Tx coalescing Latency vs
Throughput behavior. Add tx_mode_latency devarg instead, to
dynamically control Tx coalescing behavior.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove compile time flags and use dynamic logging for debug prints.
Also remove rarely used debug logs in register access and datapath.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
TSO (TCP Segmentation Offload) is enabled by default on vhost.
Add the ability to disable TSO on vhost.
The user should also disable the feature on the virtual machine's xml.
Signed-off-by: Noa Ezra <noae@mellanox.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Explicitly document that the MAC/VLAN filtering in virtio
is best effort to help users understand why unwanted packets
could still arrive.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private resources
for the port can be freed by rte_eth_dev_close().
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch adds stats_get, stats_reset, xstats_get, xstats_get_names
xstats_reset, xstats_get_by_id and xstats_get_names_by_id related
function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds queue related operation, package sending and
receiving function codes.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Wang (Jushui) <wangmin3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for hns3 VF PMD driver.
In current version, we only support VF device is bound to vfio_pci or
igb_uio and then driven by DPDK driver when PF is driven by kernel mode
hns3 ethdev driver, VF is not supported when PF is driven by DPDK
driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@hisilicon.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for vlan related operation of hns3 PMD driver.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for MAC PAUSE flow control and priority flow
control(PFC).
MAC PAUSE flow control features:
All user priorities(up) are mapped to tc0. It supports settings of flow
mode and pause time.
DCB features:
Up can be mapped to other tc driver permits according to business
requirement. We can config DCB information and enable PFC by
rte_eth_dev_configure interface. Besides, enabling flow control of a
priority is supported by rte_eth_dev_priority_flow_ctrl_set interface.
we can also set flow mode and pause time by
rte_eth_dev_priority_flow_ctrl_set. we do not support manual setting of
ETS, but driver equally distributes bandwidth for each tc according to
number of used tc.
In addition, flow control function by default is turned off to ensure
that app startup state is the same each time.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for RSS of hns3 PMD driver. It included the
follow functions:
In file hns3_rss.c:
1) Set/query hash key, rss_hf by .rss_hash_update/.rss_hash_conf_get ops
callback functions.
2) Set/query redirection table by .reta_update/.reta_query. ops callback
functions.
3) Set/query hash algorithm by .filter_ctrl ops callback function when
the 'filter_type' is RTE_ETH_FILTER_HASH.
In file hns3_flow.c:
1) Set hash key, rss_hf, redirection table and algorithm by .create ops
callback function.
2) Disable RSS by .destroy or .flush ops callback function.
3) Check the effectiveness of the RSS's configuration by .validate ops
callback function.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds support for rte_flow_ops operation and flow
director of hns3 PMD driver.
Flow director feature is only supported in hns3 PF driver.
It supports the network L2\L3\L4 and tunnel packet creation,
deletion, flushing, and querying hit statistics.
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the following operations defined in struct eth_dev_ops:
mtu_set, infos_get and fw_version_get for hns3 PMD driver.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the following mac address related operations defined in
struct eth_dev_ops: mac_addr_add, mac_addr_remove, mac_addr_set
and set_mc_addr_list.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
port reset cause crash when ports are not stopped. Fixed by refusing the
reset when port is not stopped.
Fixes: 97f1e196799f ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The ice has the feature to extract protocol fields into flex descriptor
by programming per queue. Currently, the ice PMD will put the protocol
fields into rte_mbuf::udata64 with different type format. Application
can access the protocol fields quickly.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
PF driver supports counting VF adminQ messages. If any VF driver
sends much more adminQ messages to its PF driver in a period of
time, it will trigger the PF's message limitation, then in the
next certain amount of seconds the PF driver will ignore any new
adminQ message from that VF.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Change rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_dev_owner_delete() return value from void to int
and return negative errno values in case of error conditions.
Right now there is only one error case for rte_eth_dev_owner_delete() -
invalid owner, but it still makes sense to return error to catch bugs
in the code which uses the function.
Also update the usage of the function in drivers/netvsc
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_macaddr_get() return value from void to int
and return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_xstats_reset() return value from void to int and
return negative errno values in case of error conditions.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
CNF95XX SoC part is not available for general availability.
Update the documentation to reflect the status.
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
This patch adds the feature that supports loading DDP package
according to the device serial number. Prior to loading the
default DDP package (ice.pkg), the driver will check for the
presence of a device-specific DDP package with the name containing
64-bit PCIe Device Serial Number (ice-xxxxxxxxxxxxxxxx.pkg)
during initialization. Users can use "lspci -vs" to get the device
serial number.
The pkg search path are /lib/firmware/updates/intel/ice/ddp/
and /lib/firmware/intel/ice/ddp/. If the package exists,
the driver will download it to the device instead of the default
one. The loaded package type (OS default and COMMS) will be
stored in ice_adapter->active_pkg_type. The package version is
stored in ice_hw->active_pkg_ver.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Change rte_eth_dev_info_get() return value from void to int and return
negative errno values in case of error conditions.
Modify rte_eth_dev_info_get() usage across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support to configure drop action in rte_flow
infrastructure and add counter for dropped
packets due to this filter action "rx_gft_filter_drop".
Also, update supported flows and actions in qede guide.
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
This commit adds support for modifying the VID of the outermost VLAN
header already present in the packet.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
