Add common devargs key definition for "bus", "class" and "driver".
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
MCDI helper routines in libefx include length checks for response
messages, to ensure that short replies and optional fields are
handled correctly.
If the MCDI response message from the firmware is larger than the
caller's buffer then the response length reported to the caller
should be limited to the buffer size. Otherwise length checks in
the caller may allow reading past the end of the buffer.
Fixes: 6f619653b9b1 ("net/sfc/base: import MCDI implementation")
Cc: stable@dpdk.org
Signed-off-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In function efx_pci_xilinx_cap_tbl_find, pointer entry_offsetp is used
before null pointer check, which may cause access to null pointer.
This patch fix this problem.
Fixes: ba9568b8b4b7 ("common/sfc_efx/base: add Xilinx capabilities table lookup")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The indication fields in the MCDI response are individual
bits, but the current code mistakenly compares the larger
dword with 1. This breaks encap. type discovery. Fix that.
Fixes: 891408c45a63 ("common/sfc_efx/base: indicate MAE support for encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The first GA of the SN1022 does not support Geneve.
Fixes: d874d2a149ed ("common/sfc_efx/base: support UDP tunnel operations for EF100")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The action has no arguments.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
For convenience, there are two separate APIs provided, one for
adding the action and one for setting the encap. header ID.
This design allows the client driver to first build the action
set specification (which validates the order of the actions)
and, if everything is correct, proceed with allocation of the
resource utilised by the action set (encap. header). This
facilitates clarity of the client code and its efficiency.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Let the client allocate / free encap. headers.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Move function to get efx family from net driver into common driver.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Device class argument would be used to select compatible driver.
Driver probe would be skipped for incompatible device class.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add an API to verify virtio features supported by device.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add an API to get virtio features supported by device.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add EFSYS_HAS_UINT64 build dependency on EFSYS_OPT_VIRTIO.
virtio features are represented as bitmask in 64-bit unsigned
integer.
Signed-off-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add an API to query the virtqueue doorbell offset in the BAR for a VI.
For vDPA, the virtio net driver notifies the device directly by writing
doorbell. This API would be invoked from vDPA client driver.
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In the vDPA mode, only data path is offloaded in the hardware and
control path still goes through the hypervisor and it configures
virtqueues via vDPA driver so new virtqueue APIs are required.
Implement virtio init/fini and virtqueue create/destroy APIs.
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
An application may submit all-zeros masks for a given field
to be used in two given specifications and, in the meantime,
use different unmasked values. Later on, when compared, the
two specifications will prove unequal, and, if the rules in
question are outer, the client driver will have to allocate
a separate rule for the second specification. Provided that
all other match criteria are the same, the HW will deem the
two outer rules being duplicates, which is in fact the case.
Apply masks to values in efx_mae_match_spec_field_set() API
to fix the issue and avoid duplicate outer rule allocations.
Fixes: 370ed675a952 ("common/sfc_efx/base: support setting PPORT in match spec")
Cc: stable@dpdk.org
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
A field ID passed to the API may point to a gap in the array
of field descriptors. Turn down such invocations as improper.
Fixes: 370ed675a952 ("common/sfc_efx/base: support setting PPORT in match spec")
Cc: stable@dpdk.org
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The helper exits once it encounters a field which hasn't its
capability status reported by the FW. Handle the corner case
when the two mask-value pairs match for the field, which, in
the absence of capability information, is sufficient to deem
the class unaffected by the field. Explain this in a comment.
Fixes: bb71f7e0a35a ("common/sfc_efx/base: add match specs class comparison API")
Cc: stable@dpdk.org
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
A particular FW version is aware of some set of match fields.
Depending on FW configuration and match specification type, a
known field may not necessarily be allowed to have a non-zero
mask. FW communicates such restrictions via field capabilities
MCDI. Newer FW may be aware of more fields. For such fields,
older FW simply does not report any capabilities.
A situation may occur when libefx is aware of a match field
which the FW is unaware of (eg., older FW), that is, FW does
not report capability status for this field. In this case,
libefx must consider such field as unsupported and demand
all-zeros mask for it when validating match specifications.
Currently, the helper in question simply exits and reports
that the specification is valid when it encounters a field
with no capability status available. This is clearly wrong.
Introduce the missing check to fix the problem.
Fixes: 34285fd0891d ("common/sfc_efx/base: add match spec validate API")
Cc: stable@dpdk.org
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
MPORT values derived by helper functions are little-endian.
At the same time, MCDIs which consume these values perform
one more host-order to little-endian conversion internally.
Fix the helper functions to return host-order MPORT values.
Fixes: 370ed675a952 ("common/sfc_efx/base: support setting PPORT in match spec")
Fixes: bb024542fffd ("common/sfc_efx/base: add API for adding action drop")
Fixes: 097058033f03 ("common/sfc_efx/base: add API to get mport of PF/VF")
Cc: stable@dpdk.org
Reported-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
VFs can't control MAE, so it's important to override the general
MAE capability bit by taking MAE privilege into account. Reorder
the code slightly to have the privileges queried before datapath
capabilities are discovered and add required MAE privilege check.
Fixes: eb4e80085fae ("common/sfc_efx/base: indicate support for MAE")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
VFs and unprivileged PFs should not be able to control MAE.
Add MAE privilege to MCDI headers in order to reflect that.
Fixes: 84d3fb7d7e1e ("common/sfc_efx/base: add MAE definitions to MCDI")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
If MAE slice is configured without conntrack support, outer
rules must match on IP SRC/DST. This isn't reported clearly
by the FW because IPv4 and IPv6 have separate SRC/DST pairs.
The FW reports status ALWAYS for all these four fields, and
having an all-zeros mask for either field prevents the spec
from being certified by the existing spec validation method.
Extend the spec validation to take the "alternative" fields
into account so that legitimate specs don't get turned down.
Fixes: ed15d7f8e064 ("common/sfc_efx/base: validate and compare outer match specs")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Fix signed/unsigned mismatch issues found by Windows build.
Fixes: 34285fd0891d ("common/sfc_efx/base: add match spec validate API")
Fixes: bb71f7e0a35a ("common/sfc_efx/base: add match specs class comparison API")
Fixes: e9d5c5fb6872 ("common/sfc_efx/base: avoid reading past buffer")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Windows build of the current libefx rejects these specifiers.
They're unneeded anyway; the compiler should decide inlining.
Fixes: 34285fd0891d ("common/sfc_efx/base: add match spec validate API")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Improve the clarity of the code.
Fixes: 833cfcd590e2 ("common/sfc_efx/base: add API for querying board info")
Fixes: 312191e86eb0 ("common/sfc_efx/base: refactor version / boot info get helper")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Existing field ID validity check does not validate the field
descriptor availability. Make it more rigorous to avoid
reading past the buffer containing field descriptors.
Coverity issue: 363742
Fixes: 370ed675a952 ("common/sfc_efx/base: support setting PPORT in match spec")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Intel SSE has __m128i, but ARMv8 has __uint128_t. So, add compat
efsys_uint128_t to be used in driver source and have either __u128i
or __uint128_t behind.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Let the client insert / remove outer rules.
Let the client refer to an inserted outer rule in a match
specification of type ACTION.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Let the client validate an outer match specification.
Let the client comprare classes of two outer match specifications.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Match specification format and its size are not exposed to clients.
Provide an API to compare two match specifications.
A client would typically use this API to compare a match specification
of an outer rule being validated with match specifications of already
active outer rules (to make sure that rule class is supported).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MCDI-compatible enumeration for this field and
provide necessary mappings for it to be inserted
directly into mask-value pairs buffer.
VNET_ID can be used to serve the following match fields:
rte_flow_item_vxlan.vni, rte_flow_item_geneve.vni,
rte_flow_item_nvgre.tni
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MCDI-compatible enumeration for these fields and
provide necessary mappings for them to be inserted
directly into mask-value pairs buffer.
These fields are meant to comprise a so-called outer
match specification; provide necessary definitions.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MAE provides support for encapsulation. One needs to insert
a so-called outer rule, which can match outer packet fields,
to require that matching packets be parsed as tunnel frames
of a given type (VXLAN, Geneve, NVGRE). Then it is possible
to chain this rule with an action rule in order to match on
inner fields and carry out some actions on matching packets.
Report to clients what encapsulation types are supported by
MAE. Indicate the number of priority levels for outer rules.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MCDI-compatible enumeration for these fields and
provide necessary mappings for them to be inserted
directly into mask-value pairs buffer.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MCDI-compatible enumeration for these fields and
provide necessary mappings for them to be inserted
directly into mask-value pairs buffer.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MCDI-compatible enumeration for these fields and
provide necessary mappings for them to be inserted
directly into mask-value pairs buffer.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MCDI-compatible enumeration for these fields and
provide necessary mappings for them to be inserted
directly into mask-value pairs buffer.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead boards can provide extended version information.
Implement facilities necessary to obtain it.
Add an API for querying board information.
A client driver may use this to discover which of its instances
relate to which physical boards, based on board serial number
persistence for a given physical board.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Refactor MCDI helper for version information and boot status
retrieval; it should comprise two dedicated helper functions.
A later patch will extend and reuse version retrieval helper.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Client drivers may need to request that matching traffic be dropped.
Add a dedicated API to support this. The API relies on action
DELIVER with properly constructed NULL MPORT argument.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
PCIe functions have static MPORTs which can be utilised by
MAE rules as delivery destinations for matching traffic.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
This makes existing code clearer. Also, it will be used by a later patch.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
