In the function bond_mode_8023ad_enable(), the var i is used as slave
port id to the function bond_mode_8023ad_activate_slave().
This variable is only a index for array internals->active_slaves.
So its need to be fixed and change i to internals->active_slaves[i].
Fixes: 46fb43683679 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Jerry Lilijun <jerry.lilijun@huawei.com>
Tested-by: Kyle Larose <klarose@sandvine.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
During a link down event of a port participating in a LACP 802.3ad
bond the current behavior can cause all ports to be deselected
and temporarily stop all traffic on the bond, causing unexpected
traffic loss across all ports and not just the port which was
affected by the link down event.
Fixes: 46fb43683679 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are two bonding APIs using ABI versioning, and both have
port_id as parameter. Since we are already breaking ABI, no need
to keep older versions of APIs.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch add support for setting additional aggregator modes for
IEEE802.3AD in similar manner that are supported in kernel mode.
This will add support for other manner:
stable - default mode taken from IEEE802.11AX this is default
aggregator mode
bandwidth - takes aggregator with highest bandwidth
count - takes aggregator with biggest number of slaves
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add support for hardware flow classification of LACP control plane
traffic to be redirect to a dedicated receive queue on each slave which
is not visible to application. Also enables a dedicate transmit queue
for LACP traffic which allows complete decoupling of control and data
paths.
This only applies to bonding devices running in mode 4
(link-aggregation-802.3ad).
Introduce two new APIs to support enable/disabled of dedicated
queues.
- rte_eth_bond_8023ad_dedicated_queues_enable
- rte_eth_bond_8023ad_dedicated_queues_disable
rte_eth_bond_8023ad_dedicated_queues_enable must be called before
bonding port is configured or started to reserved and configure the
dedicated queues.
When this option is enabled all slaves must support flow filtering
by Ethernet type and support one additional Tx and Rx queue on
each slave.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
The bonded device does not have to be a PCI device. Use the rte_ethdev
functions instead.
Signed-off-by: Wen Chiu <wchiu@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
If the numa node is unknown, use the value from rte_socket_id() to avoid
an allocation failure.
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
In 2 modes (802.3ad and TLB) of the link bonding driver, monitoring of
link status is used to determine the active slaves to use. These
functions are currently using the rte_link_link_get which could block
for up to 9 seconds, depending on the slave device.
In the 802.3ad periodic callback and in the TLB slave callback the
link status of slaves are checked using rte_eth_link_get function.
This patch changes to the no-wait version of the link get function to
avoid the possible issues which could be introduced if this call was
to block for an extended period of time.
Fixes: 46fb43683679 ("bond: add mode 4")
Fixes: 7c76a747e68c ("bond: add mode 5")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
According to the standard, state machine of LACP should transmit lacpdu
when partner's state changes from slow to fast, rather than from fast
to slow.
Fixes: 46fb43683679 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Sha Zhang <zhangsha.zhang@huawei.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The older versions of rte_eth_bond_8023ad_conf_get and
rte_eth_bond_8023ad_setup were available in the old way since 2.0 - at
least according to the map file.
But versioning in the code was set to 16.04.
That breaks compatibility checks for 2.0 on that library.
For example with the dpdk abi checker:
http://people.canonical.com/~paelzer/compat_report.html
To fix, version the old symbols on the 2.0 version as they were
initially added to the map file.
See http://people.canonical.com/~paelzer/compat_report.html
Fixes: dc40f17a ("net/bonding: allow external state machine in mode 4")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Provide functions to allow an external 802.3ad state machine to transmit
and receive LACPDUs and to set the collection/distribution flags on
slave interfaces.
Signed-off-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Loop that calculates total number of tx descriptors in slave tx queues
should iterate up to nb_tx_queues, not nb_rx_queues.
Fixes: 3ef7955700e7 ("bonding: fix LACP mempool size")
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Copy all needed fields from the mode8023ad_private structure in
bond_mode_8023ad_conf_get(). This help ensure that a subsequent call
to rte_eth_bond_8023ad_setup() is not passed uninitialized data that
would result in either incorrect behavior or a failed sanity check.
Fixes: 46fb43683679 ("bond: add mode 4")
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The following messages might appear after some idle time:
"PMD: Failed to allocate LACP packet from pool"
The fix ensures the mempool size is greater than the sum
of TX descriptors.
Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
remove pci_dev, pci_drv, rte_bond_pmd and pci_id_table.
handle numa_node for vdevs
handle RTE_ETH_DEV_INTR_LSC for vdevs
rename the function valid_bonded_device to check_for_bonded_device
remove branches on pci_dev
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
On slave activation in LACP (8023AD) SOCKET_ANY_ID (which is -1)
is being casted to unsigned char and then to signed int.
The result is that socket_id has value of 255, not -1.
This results to memory allocation failure.
Fixes: 46fb43683679 ("bond: add mode 4")
Signed-off-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Move bonded ethdev pmd to drivers/net
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
