command is: set vf vlan tag port_id vf_id on|off
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add command to call rte_pmd_i40e_set_vf_broadcast.
Add set vf broadcast in testpmd_funcs.rst file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF multicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF unicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The new VF Daemon (VFD) APIs is implemented on i40e. Change
testpmd code to use them, including VF MAC anti-spoofing,
VF VLAN anti-spoofing, TX loopback, VF VLAN strip, VF VLAN
insert.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Parameter checking is done in the rte_pmd_ixgbe_* functions.
Remove parameter checking from before calls to the rte_pmd_ixgbe_*
functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Use the the following ixgbe public functions:
rte_pmd_ixgbe_set_vf_rate_limit
rte_pmd_ixgbe_set_vf_rx
rte_pmd_ixgbe_set_vf_rxmode
rte_pmd_ixgbe_set_vf_tx
rte_pmd_ixgbe_set_vf_vlan_filter
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Some CLIs don't check the input port ID, it
may cause segmentation fault (core dumped).
Fixes: 425781ff5a ("app/testpmd: add ixgbe VF management")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds function rte_pktmbuf_linearize to let crypto PMD coalesce
chained mbuf before crypto operation and extend their capabilities to
support segmented mbufs when device cannot handle them natively.
Included unit tests for rte_pktmbuf_linearize functionality:
1) Creates banch of segmented mbufs with different size and number of
segments.
2) Fills noncontigouos mbuf with sequential values.
3) Uses rte_pktmbuf_linearize to coalesce segmented buffer into one
contiguous.
4) Verifies data in linearized buffer.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Below MACsec offload commands are added:
- set macsec offload <port_id> on encrypt on|off replay-protect on|off
- set macsec offload <port_id> off
- set macsec sc tx|rx <port_id> <mac> <pi>
- set macsec sa tx|rx <port_id> <idx> <an> <pn> <key>
Also update the testpmd user guide.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
By introducing explicit -lrte_pmd_ixgbe link request in
testpmd Makefile,"-Wl,-lrte_pmd_ixgbe" provided twice, and linker
removes the duplication by keeping only first occurrence.
This moves "-Wl,-lrte_pmd_ixgbe" out of "-Wl,--whole-archive" flag
and makes symbol generation totally different than previous version
in case of static build.
This patch fixes the static build linking order by introducing
-lrte_pmd_ixgbe under the shared library config
(CONFIG_RTE_BUILD_SHARED_LIB).
Fixes: 425781ff5a ("app/testpmd: add ixgbe VF management")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses several obvious issues reported by Coverity
with array bounds checks in functions related to the flow API.
Coverity issue: 139596, 139597, 139598, 139599
Fixes: 938a184a18 ("app/testpmd: implement basic support for flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Make all the DPDK Python apps work with Python 2 or 3 to
allow them to work with whatever is the system default.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Make all DPDK python application compliant with the PEP8 standard
to allow for consistency checking of patches and to allow further
refactoring.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Since all current drivers supports Tx preparation API, it is used
in csum forwarding engine by default for all drivers.
Adding additional step to the csum engine costs about 3-4% of performance
drop, on my setup with ixgbe driver. It's caused mostly by the need
of reaccessing and modification of packet data.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Since rte_eth_dev_info_get does memset() on dev_info before
calling device specific code, the explicit assignment of NULL
in all these virtual drivers has no effect.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
A missing include causes the following compilation errors:
error: use of undeclared identifier 'AF_INET'
error: use of undeclared identifier 'AF_INET6'
Fixes: ef6e38550f ("app/testpmd: add items ipv4/ipv6 to flow command")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit exposes the following item fields through the flow command:
- VLAN priority code point, drop eligible indicator and VLAN identifier
(all part of TCI).
- IPv4 type of service, time to live and protocol.
- IPv6 traffic class, flow label, next header and hop limit.
- SCTP tag and checksum.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
- QUEUE: assign packets to a given queue index.
- DUP: duplicate packets to a given queue index.
- RSS: spread packets among several queues.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- MARK: attach 32 bit value to packets.
- FLAG: flag packets.
- DROP: drop packets.
- COUNT: enable counters for a rule.
- PF: redirect packets to physical device function.
- VF: redirect packets to virtual device function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match a few properties of common L4[.5] protocol
headers:
- ICMP: type and code.
- UDP: source and destination ports.
- TCP: source and destination ports.
- SCTP: source and destination ports.
- VXLAN: network identifier.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add the ability to match basic fields from IPv4 and IPv6 headers (source
and destination addresses only).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
These pattern items match basic Ethernet headers (source, destination and
type) and related 802.1Q/ad VLAN headers.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Matches arbitrary byte strings with properties:
- relative: look for pattern after the previous item.
- search: search pattern from offset (see also limit).
- offset: absolute or relative offset for pattern.
- limit: search area limit for start of pattern.
- length: pattern length.
- pattern: byte string to look for.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
- PF: match packets addressed to the physical function.
- VF: match packets addressed to a virtual function ID.
- PORT: device-specific physical port index to use.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This pattern item matches any protocol in place of the current layer and
has two properties:
- min: minimum number of layers covered (0 or more).
- max: maximum number of layers covered (0 means infinity).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Several rte_flow structures expose bit-fields that cannot be set in a
generic fashion at byte level. Add bit-mask support to handle them.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Generating bit-masks from prefix lengths is often more convenient than
providing them entirely (e.g. to define IPv4 and IPv6 subnets).
This commit adds the "prefix" operator that assigns generated bit-masks to
any pattern item specification field.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add parser code to fully set individual fields of pattern item
specification structures, using the following operators:
- fix: sets field and applies full bit-mask for perfect matching.
- spec: sets field without modifying its bit-mask.
- last: sets upper value of the spec => last range.
- mask: sets bit-mask affecting both spec and last from arbitrary value.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow query {port_id} {rule_id} {action}
Query a specific action of an existing flow rule.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow (validate|create) {port_id}
[group {group_id}] [priority {level}] [ingress] [egress]
pattern {item} [/ {item} [...]] / end
actions {action} [/ {action} [...]] / end
Either check the validity of a flow rule or create it. Any number of
pattern items and actions can be provided in any order. Completion is
available for convenience.
This commit only adds support for the most basic item and action types,
namely:
- END: terminates pattern items and actions lists.
- VOID: item/action filler, no operation.
- INVERT: inverted pattern matching, process packets that do not match.
- PASSTHRU: action that leaves packets up for additional processing by
subsequent flow rules.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow destroy {port_id} rule {rule_id} [...]
Destroy a given set of flow rules associated with a port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow flush {port_id}
Destroy all flow rules on a port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Syntax:
flow list {port_id} [group {group_id}] [...]
List configured flow rules on a port. Output can optionally be limited to a
given set of group identifiers.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Parse all integer types and handle conversion to network byte order in a
single function.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Managing generic flow API functions from command line requires the use of
dynamic tokens for convenience as flow rules are not fixed and cannot be
defined statically.
This commit adds specific flexible parser code and object for a new "flow"
command in separate file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Add basic management functions for the generic flow API (validate, create,
destroy, flush, query and list). Flow rule objects and properties are
arranged in lists associated with each port.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This moves the non-PCI related initialization of the link state interrupt
callback list and the setting of the default MTU to rte_eth_dev_allocate()
so that drivers only need to set non-default values.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This makes it easier to check which driver name is reported through ethdev
rte_eth_dev_info_get().
Example:
./build/app/testpmd -c 0x6 --vdev net_af_packet0,iface=mgmt0 --
-i --total-num-mbufs 2049
[snip]
testpmd> show port info all
********************* Infos for port 0 *********************
MAC address: DE:AD:DE:01:02:03
Driver name: net_af_packet
Connect to socket: 0
memory allocation on the socket: 0
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Formatted as:
cmd fixed_string fixed|string|options <variable>: Description
If there is no description, final colon emitted.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The test recently added accesses to lpm->tbl8[ip >> 8] with is much
larger than the size of the table, causing a crash of the test
application.
Fix this typo by replacing tbl8 by tbl24.
Fixes: 231fa88ed5 ("app/test: verify LPM tbl8 recycle")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Data Centre Bridge (DCB) configuration fails when SRIOV is
enabled if nb_rxq or nb_txq are greater than nb_q_per_pool.
The failure occurs during configuration of the ixgbe PMD when
it is started, in the ixgbe_check_mq_mode function.
Fixes: 2a977b891f ("app/testpmd: fix DCB configuration")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This commit fixes problem with device hanging because of
wrong pointer values in snow3g performance test
Fixes: 97fe6461c7 ("app/test: add SNOW 3G performance test")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
num_route_entries needs to be resetted.
Fixes: 17d60f5b5e ("app/test: remove large IPv4 LPM data file")
Signed-off-by: Nikita Kozlov <nikita@elyzion.net>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
offsets for digest and data need to be adjusted
to take prepended IV into account
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch replaces name "libcrypto" to "openssl" from file directories,
symbol prefixes and sub-names connected with old name.
Renamed poll mode driver files, test files, and documentations.
It is done to better name association with library because
the cryptography operations are using Openssl library crypto API.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This commit adds continual performace tests to Intel(R) QuickAssist
Technology tests suite. Performance tests are run continually with
some number of repeating loops.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This commit adds tests with corrupted data to the Intel QuickAssist
Technology tests suite in test_cryptodev.c
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
