/* SPDX-License-Identifier: BSD-3-Clause * Copyright (c) 2014-2018 Broadcom Limited * All rights reserved. * * DO NOT MODIFY!!! This file is automatically generated. */ #ifndef _HSI_STRUCT_DEF_DPDK_H_ #define _HSI_STRUCT_DEF_DPDK_H_ /* This is the HWRM command header. */ /* hwrm_cmd_hdr (size:128b/16B) */ struct hwrm_cmd_hdr { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* This is the HWRM response header. */ /* hwrm_resp_hdr (size:64b/8B) */ struct hwrm_resp_hdr { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; } __attribute__((packed)); /* * TLV encapsulated message. Use the TLV type field of the * TLV to determine the type of message encapsulated. */ #define CMD_DISCR_TLV_ENCAP UINT32_C(0x8000) #define CMD_DISCR_LAST CMD_DISCR_TLV_ENCAP /* HWRM request message */ #define TLV_TYPE_HWRM_REQUEST UINT32_C(0x1) /* HWRM response message */ #define TLV_TYPE_HWRM_RESPONSE UINT32_C(0x2) /* RoCE slow path command */ #define TLV_TYPE_ROCE_SP_COMMAND UINT32_C(0x3) /* Engine CKV - The device's serial number. */ #define TLV_TYPE_ENGINE_CKV_DEVICE_SERIAL_NUMBER UINT32_C(0x8001) /* Engine CKV - Per-function random nonce data. */ #define TLV_TYPE_ENGINE_CKV_NONCE UINT32_C(0x8002) /* Engine CKV - Initialization vector. */ #define TLV_TYPE_ENGINE_CKV_IV UINT32_C(0x8003) /* Engine CKV - Authentication tag. */ #define TLV_TYPE_ENGINE_CKV_AUTH_TAG UINT32_C(0x8004) /* Engine CKV - The encrypted data. */ #define TLV_TYPE_ENGINE_CKV_CIPHERTEXT UINT32_C(0x8005) /* Engine CKV - Supported algorithms. */ #define TLV_TYPE_ENGINE_CKV_ALGORITHMS UINT32_C(0x8006) /* Engine CKV - The EC curve name and ECC public key information. */ #define TLV_TYPE_ENGINE_CKV_ECC_PUBLIC_KEY UINT32_C(0x8007) /* Engine CKV - The ECDSA signature. */ #define TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE UINT32_C(0x8008) #define TLV_TYPE_LAST \ TLV_TYPE_ENGINE_CKV_ECDSA_SIGNATURE /* tlv (size:64b/8B) */ struct tlv { /* * The command discriminator is used to differentiate between various * types of HWRM messages. This includes legacy HWRM and RoCE slowpath * command messages as well as newer TLV encapsulated HWRM commands. * * For TLV encapsulated messages this field must be 0x8000. */ uint16_t cmd_discr; uint8_t reserved_8b; uint8_t flags; /* * Indicates the presence of additional TLV encapsulated data * follows this TLV. */ #define TLV_FLAGS_MORE UINT32_C(0x1) /* Last TLV in a sequence of TLVs. */ #define TLV_FLAGS_MORE_LAST UINT32_C(0x0) /* More TLVs follow this TLV. */ #define TLV_FLAGS_MORE_NOT_LAST UINT32_C(0x1) /* * When an HWRM receiver detects a TLV type that it does not * support with the TLV required flag set, the receiver must * reject the HWRM message with an error code indicating an * unsupported TLV type. */ #define TLV_FLAGS_REQUIRED UINT32_C(0x2) /* No */ #define TLV_FLAGS_REQUIRED_NO (UINT32_C(0x0) << 1) /* Yes */ #define TLV_FLAGS_REQUIRED_YES (UINT32_C(0x1) << 1) #define TLV_FLAGS_REQUIRED_LAST TLV_FLAGS_REQUIRED_YES /* * This field defines the TLV type value which is divided into * two ranges to differentiate between global and local TLV types. * Global TLV types must be unique across all defined TLV types. * Local TLV types are valid only for extensions to a given * HWRM message and may be repeated across different HWRM message * types. There is a direct correlation of each HWRM message type * to a single global TLV type value. * * Global TLV range: `0 - (63k-1)` * * Local TLV range: `63k - (64k-1)` */ uint16_t tlv_type; /* * Length of the message data encapsulated by this TLV in bytes. * This length does not include the size of the TLV header itself * and it must be an integer multiple of 8B. */ uint16_t length; } __attribute__((packed)); /* Input */ /* input (size:128b/16B) */ struct input { /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t req_type; /* * This value indicates the what completion ring the request will * be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t cmpl_ring; /* This value indicates the command sequence number. */ uint16_t seq_id; /* * Target ID of this command. * * 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors * 0xFFFF - HWRM */ uint16_t target_id; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint64_t resp_addr; } __attribute__((packed)); /* Output */ /* output (size:64b/8B) */ struct output { /* * Pass/Fail or error type * * Note: receiver to verify the in parameters, and fail the call * with an error when appropriate */ uint16_t error_code; /* This field returns the type of original request. */ uint16_t req_type; /* This field provides original sequence number of the command. */ uint16_t seq_id; /* * This field is the length of the response in bytes. The * last byte of the response is a valid flag that will read * as '1' when the command has been completely written to * memory. */ uint16_t resp_len; } __attribute__((packed)); /* Short Command Structure */ /* hwrm_short_input (size:128b/16B) */ struct hwrm_short_input { /* * This field indicates the type of request in the request buffer. * The format for the rest of the command (request) is determined * by this field. */ uint16_t req_type; /* * This field indicates a signature that is used to identify short * form of the command listed here. This field shall be set to * 17185 (0x4321). */ uint16_t signature; /* Signature indicating this is a short form of HWRM command */ #define HWRM_SHORT_INPUT_SIGNATURE_SHORT_CMD UINT32_C(0x4321) #define HWRM_SHORT_INPUT_SIGNATURE_LAST \ HWRM_SHORT_INPUT_SIGNATURE_SHORT_CMD /* Reserved for future use. */ uint16_t unused_0; /* This value indicates the length of the request. */ uint16_t size; /* * This is the host address where the request was written. * This area must be 16B aligned. */ uint64_t req_addr; } __attribute__((packed)); /* * Command numbering * # NOTE - definitions already in hwrm_req_type, in hwrm_types.yaml * # So only structure definition is provided here. */ /* cmd_nums (size:64b/8B) */ struct cmd_nums { /* * This version of the specification defines the commands listed in * the table below. The following are general implementation * requirements for these commands: * * # All commands listed below that are marked neither * reserved nor experimental shall be implemented by the HWRM. * # A HWRM client compliant to this specification should not use * commands outside of the list below. * # A HWRM client compliant to this specification should not use * command numbers marked reserved below. * # A command marked experimental below may not be implemented * by the HWRM. * # A command marked experimental may change in the * future version of the HWRM specification. * # A command not listed below may be implemented by the HWRM. * The behavior of commands that are not listed below is outside * the scope of this specification. */ uint16_t req_type; #define HWRM_VER_GET UINT32_C(0x0) #define HWRM_FUNC_BUF_UNRGTR UINT32_C(0xe) #define HWRM_FUNC_VF_CFG UINT32_C(0xf) /* Reserved for future use. */ #define HWRM_RESERVED1 UINT32_C(0x10) #define HWRM_FUNC_RESET UINT32_C(0x11) #define HWRM_FUNC_GETFID UINT32_C(0x12) #define HWRM_FUNC_VF_ALLOC UINT32_C(0x13) #define HWRM_FUNC_VF_FREE UINT32_C(0x14) #define HWRM_FUNC_QCAPS UINT32_C(0x15) #define HWRM_FUNC_QCFG UINT32_C(0x16) #define HWRM_FUNC_CFG UINT32_C(0x17) #define HWRM_FUNC_QSTATS UINT32_C(0x18) #define HWRM_FUNC_CLR_STATS UINT32_C(0x19) #define HWRM_FUNC_DRV_UNRGTR UINT32_C(0x1a) #define HWRM_FUNC_VF_RESC_FREE UINT32_C(0x1b) #define HWRM_FUNC_VF_VNIC_IDS_QUERY UINT32_C(0x1c) #define HWRM_FUNC_DRV_RGTR UINT32_C(0x1d) #define HWRM_FUNC_DRV_QVER UINT32_C(0x1e) #define HWRM_FUNC_BUF_RGTR UINT32_C(0x1f) #define HWRM_PORT_PHY_CFG UINT32_C(0x20) #define HWRM_PORT_MAC_CFG UINT32_C(0x21) /* Experimental */ #define HWRM_PORT_TS_QUERY UINT32_C(0x22) #define HWRM_PORT_QSTATS UINT32_C(0x23) #define HWRM_PORT_LPBK_QSTATS UINT32_C(0x24) /* Experimental */ #define HWRM_PORT_CLR_STATS UINT32_C(0x25) /* Experimental */ #define HWRM_PORT_LPBK_CLR_STATS UINT32_C(0x26) #define HWRM_PORT_PHY_QCFG UINT32_C(0x27) #define HWRM_PORT_MAC_QCFG UINT32_C(0x28) /* Experimental */ #define HWRM_PORT_MAC_PTP_QCFG UINT32_C(0x29) #define HWRM_PORT_PHY_QCAPS UINT32_C(0x2a) #define HWRM_PORT_PHY_I2C_WRITE UINT32_C(0x2b) #define HWRM_PORT_PHY_I2C_READ UINT32_C(0x2c) #define HWRM_PORT_LED_CFG UINT32_C(0x2d) #define HWRM_PORT_LED_QCFG UINT32_C(0x2e) #define HWRM_PORT_LED_QCAPS UINT32_C(0x2f) #define HWRM_QUEUE_QPORTCFG UINT32_C(0x30) #define HWRM_QUEUE_QCFG UINT32_C(0x31) #define HWRM_QUEUE_CFG UINT32_C(0x32) #define HWRM_FUNC_VLAN_CFG UINT32_C(0x33) #define HWRM_FUNC_VLAN_QCFG UINT32_C(0x34) #define HWRM_QUEUE_PFCENABLE_QCFG UINT32_C(0x35) #define HWRM_QUEUE_PFCENABLE_CFG UINT32_C(0x36) #define HWRM_QUEUE_PRI2COS_QCFG UINT32_C(0x37) #define HWRM_QUEUE_PRI2COS_CFG UINT32_C(0x38) #define HWRM_QUEUE_COS2BW_QCFG UINT32_C(0x39) #define HWRM_QUEUE_COS2BW_CFG UINT32_C(0x3a) /* Experimental */ #define HWRM_QUEUE_DSCP_QCAPS UINT32_C(0x3b) /* Experimental */ #define HWRM_QUEUE_DSCP2PRI_QCFG UINT32_C(0x3c) /* Experimental */ #define HWRM_QUEUE_DSCP2PRI_CFG UINT32_C(0x3d) #define HWRM_VNIC_ALLOC UINT32_C(0x40) #define HWRM_VNIC_FREE UINT32_C(0x41) #define HWRM_VNIC_CFG UINT32_C(0x42) #define HWRM_VNIC_QCFG UINT32_C(0x43) #define HWRM_VNIC_TPA_CFG UINT32_C(0x44) /* Experimental */ #define HWRM_VNIC_TPA_QCFG UINT32_C(0x45) #define HWRM_VNIC_RSS_CFG UINT32_C(0x46) #define HWRM_VNIC_RSS_QCFG UINT32_C(0x47) #define HWRM_VNIC_PLCMODES_CFG UINT32_C(0x48) #define HWRM_VNIC_PLCMODES_QCFG UINT32_C(0x49) #define HWRM_VNIC_QCAPS UINT32_C(0x4a) #define HWRM_RING_ALLOC UINT32_C(0x50) #define HWRM_RING_FREE UINT32_C(0x51) #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS UINT32_C(0x52) #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS UINT32_C(0x53) #define HWRM_RING_RESET UINT32_C(0x5e) #define HWRM_RING_GRP_ALLOC UINT32_C(0x60) #define HWRM_RING_GRP_FREE UINT32_C(0x61) /* Reserved for future use. */ #define HWRM_RESERVED5 UINT32_C(0x64) /* Reserved for future use. */ #define HWRM_RESERVED6 UINT32_C(0x65) #define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC UINT32_C(0x70) #define HWRM_VNIC_RSS_COS_LB_CTX_FREE UINT32_C(0x71) #define HWRM_CFA_L2_FILTER_ALLOC UINT32_C(0x90) #define HWRM_CFA_L2_FILTER_FREE UINT32_C(0x91) #define HWRM_CFA_L2_FILTER_CFG UINT32_C(0x92) #define HWRM_CFA_L2_SET_RX_MASK UINT32_C(0x93) #define HWRM_CFA_VLAN_ANTISPOOF_CFG UINT32_C(0x94) #define HWRM_CFA_TUNNEL_FILTER_ALLOC UINT32_C(0x95) #define HWRM_CFA_TUNNEL_FILTER_FREE UINT32_C(0x96) /* Experimental */ #define HWRM_CFA_ENCAP_RECORD_ALLOC UINT32_C(0x97) /* Experimental */ #define HWRM_CFA_ENCAP_RECORD_FREE UINT32_C(0x98) #define HWRM_CFA_NTUPLE_FILTER_ALLOC UINT32_C(0x99) #define HWRM_CFA_NTUPLE_FILTER_FREE UINT32_C(0x9a) #define HWRM_CFA_NTUPLE_FILTER_CFG UINT32_C(0x9b) /* Experimental */ #define HWRM_CFA_EM_FLOW_ALLOC UINT32_C(0x9c) /* Experimental */ #define HWRM_CFA_EM_FLOW_FREE UINT32_C(0x9d) /* Experimental */ #define HWRM_CFA_EM_FLOW_CFG UINT32_C(0x9e) #define HWRM_TUNNEL_DST_PORT_QUERY UINT32_C(0xa0) #define HWRM_TUNNEL_DST_PORT_ALLOC UINT32_C(0xa1) #define HWRM_TUNNEL_DST_PORT_FREE UINT32_C(0xa2) #define HWRM_STAT_CTX_ALLOC UINT32_C(0xb0) #define HWRM_STAT_CTX_FREE UINT32_C(0xb1) #define HWRM_STAT_CTX_QUERY UINT32_C(0xb2) #define HWRM_STAT_CTX_CLR_STATS UINT32_C(0xb3) #define HWRM_PORT_QSTATS_EXT UINT32_C(0xb4) #define HWRM_FW_RESET UINT32_C(0xc0) #define HWRM_FW_QSTATUS UINT32_C(0xc1) /* Experimental */ #define HWRM_FW_SET_TIME UINT32_C(0xc8) /* Experimental */ #define HWRM_FW_GET_TIME UINT32_C(0xc9) /* Experimental */ #define HWRM_FW_SET_STRUCTURED_DATA UINT32_C(0xca) /* Experimental */ #define HWRM_FW_GET_STRUCTURED_DATA UINT32_C(0xcb) /* Experimental */ #define HWRM_FW_IPC_MAILBOX UINT32_C(0xcc) #define HWRM_EXEC_FWD_RESP UINT32_C(0xd0) #define HWRM_REJECT_FWD_RESP UINT32_C(0xd1) #define HWRM_FWD_RESP UINT32_C(0xd2) #define HWRM_FWD_ASYNC_EVENT_CMPL UINT32_C(0xd3) #define HWRM_OEM_CMD UINT32_C(0xd4) #define HWRM_TEMP_MONITOR_QUERY UINT32_C(0xe0) #define HWRM_WOL_FILTER_ALLOC UINT32_C(0xf0) #define HWRM_WOL_FILTER_FREE UINT32_C(0xf1) #define HWRM_WOL_FILTER_QCFG UINT32_C(0xf2) #define HWRM_WOL_REASON_QCFG UINT32_C(0xf3) /* Experimental */ #define HWRM_CFA_METER_PROFILE_ALLOC UINT32_C(0xf5) /* Experimental */ #define HWRM_CFA_METER_PROFILE_FREE UINT32_C(0xf6) /* Experimental */ #define HWRM_CFA_METER_PROFILE_CFG UINT32_C(0xf7) /* Experimental */ #define HWRM_CFA_METER_INSTANCE_ALLOC UINT32_C(0xf8) /* Experimental */ #define HWRM_CFA_METER_INSTANCE_FREE UINT32_C(0xf9) /* Experimental */ #define HWRM_CFA_VFR_ALLOC UINT32_C(0xfd) /* Experimental */ #define HWRM_CFA_VFR_FREE UINT32_C(0xfe) /* Experimental */ #define HWRM_CFA_VF_PAIR_ALLOC UINT32_C(0x100) /* Experimental */ #define HWRM_CFA_VF_PAIR_FREE UINT32_C(0x101) /* Experimental */ #define HWRM_CFA_VF_PAIR_INFO UINT32_C(0x102) /* Experimental */ #define HWRM_CFA_FLOW_ALLOC UINT32_C(0x103) /* Experimental */ #define HWRM_CFA_FLOW_FREE UINT32_C(0x104) /* Experimental */ #define HWRM_CFA_FLOW_FLUSH UINT32_C(0x105) /* Experimental */ #define HWRM_CFA_FLOW_STATS UINT32_C(0x106) /* Experimental */ #define HWRM_CFA_FLOW_INFO UINT32_C(0x107) /* Experimental */ #define HWRM_CFA_DECAP_FILTER_ALLOC UINT32_C(0x108) /* Experimental */ #define HWRM_CFA_DECAP_FILTER_FREE UINT32_C(0x109) #define HWRM_CFA_VLAN_ANTISPOOF_QCFG UINT32_C(0x10a) #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC UINT32_C(0x10b) #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE UINT32_C(0x10c) /* Experimental */ #define HWRM_CFA_PAIR_ALLOC UINT32_C(0x10d) /* Experimental */ #define HWRM_CFA_PAIR_FREE UINT32_C(0x10e) /* Experimental */ #define HWRM_CFA_PAIR_INFO UINT32_C(0x10f) /* Experimental */ #define HWRM_FW_IPC_MSG UINT32_C(0x110) #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO UINT32_C(0x111) /* Engine CKV - Ping the device and SRT firmware to get the public key. */ #define HWRM_ENGINE_CKV_HELLO UINT32_C(0x12d) /* Engine CKV - Get the current allocation status of keys provisioned in the key vault. */ #define HWRM_ENGINE_CKV_STATUS UINT32_C(0x12e) /* Engine CKV - Add a new CKEK used to encrypt keys. */ #define HWRM_ENGINE_CKV_CKEK_ADD UINT32_C(0x12f) /* Engine CKV - Delete a previously added CKEK. */ #define HWRM_ENGINE_CKV_CKEK_DELETE UINT32_C(0x130) /* Engine CKV - Add a new key to the key vault. */ #define HWRM_ENGINE_CKV_KEY_ADD UINT32_C(0x131) /* Engine CKV - Delete a key from the key vault. */ #define HWRM_ENGINE_CKV_KEY_DELETE UINT32_C(0x132) /* Engine CKV - Delete all keys from the key vault. */ #define HWRM_ENGINE_CKV_FLUSH UINT32_C(0x133) /* Engine CKV - Get random data. */ #define HWRM_ENGINE_CKV_RNG_GET UINT32_C(0x134) /* Engine CKV - Generate and encrypt a new AES key. */ #define HWRM_ENGINE_CKV_KEY_GEN UINT32_C(0x135) /* Engine - Query the available queue groups configuration. */ #define HWRM_ENGINE_QG_CONFIG_QUERY UINT32_C(0x13c) /* Engine - Query the queue groups assigned to a function. */ #define HWRM_ENGINE_QG_QUERY UINT32_C(0x13d) /* Engine - Query the available queue group meter profile configuration. */ #define HWRM_ENGINE_QG_METER_PROFILE_CONFIG_QUERY UINT32_C(0x13e) /* Engine - Query the configuration of a queue group meter profile. */ #define HWRM_ENGINE_QG_METER_PROFILE_QUERY UINT32_C(0x13f) /* Engine - Allocate a queue group meter profile. */ #define HWRM_ENGINE_QG_METER_PROFILE_ALLOC UINT32_C(0x140) /* Engine - Free a queue group meter profile. */ #define HWRM_ENGINE_QG_METER_PROFILE_FREE UINT32_C(0x141) /* Engine - Query the meters assigned to a queue group. */ #define HWRM_ENGINE_QG_METER_QUERY UINT32_C(0x142) /* Engine - Bind a queue group meter profile to a queue group. */ #define HWRM_ENGINE_QG_METER_BIND UINT32_C(0x143) /* Engine - Unbind a queue group meter profile from a queue group. */ #define HWRM_ENGINE_QG_METER_UNBIND UINT32_C(0x144) /* Engine - Bind a queue group to a function. */ #define HWRM_ENGINE_QG_FUNC_BIND UINT32_C(0x145) /* Engine - Query the scheduling group configuration. */ #define HWRM_ENGINE_SG_CONFIG_QUERY UINT32_C(0x146) /* Engine - Query the queue groups assigned to a scheduling group. */ #define HWRM_ENGINE_SG_QUERY UINT32_C(0x147) /* Engine - Query the configuration of a scheduling group's meter profiles. */ #define HWRM_ENGINE_SG_METER_QUERY UINT32_C(0x148) /* Engine - Configure a scheduling group's meter profiles. */ #define HWRM_ENGINE_SG_METER_CONFIG UINT32_C(0x149) /* Engine - Bind a queue group to a scheduling group. */ #define HWRM_ENGINE_SG_QG_BIND UINT32_C(0x14a) /* Engine - Unbind a queue group from its scheduling group. */ #define HWRM_ENGINE_QG_SG_UNBIND UINT32_C(0x14b) /* Engine - Query the Engine configuration. */ #define HWRM_ENGINE_CONFIG_QUERY UINT32_C(0x154) /* Engine - Configure the statistics accumulator for an Engine. */ #define HWRM_ENGINE_STATS_CONFIG UINT32_C(0x155) /* Engine - Clear the statistics accumulator for an Engine. */ #define HWRM_ENGINE_STATS_CLEAR UINT32_C(0x156) /* Engine - Query the statistics accumulator for an Engine. */ #define HWRM_ENGINE_STATS_QUERY UINT32_C(0x157) /* Engine - Allocate an Engine RQ. */ #define HWRM_ENGINE_RQ_ALLOC UINT32_C(0x15e) /* Engine - Free an Engine RQ. */ #define HWRM_ENGINE_RQ_FREE UINT32_C(0x15f) /* Engine - Allocate an Engine CQ. */ #define HWRM_ENGINE_CQ_ALLOC UINT32_C(0x160) /* Engine - Free an Engine CQ. */ #define HWRM_ENGINE_CQ_FREE UINT32_C(0x161) /* Engine - Allocate an NQ. */ #define HWRM_ENGINE_NQ_ALLOC UINT32_C(0x162) /* Engine - Free an NQ. */ #define HWRM_ENGINE_NQ_FREE UINT32_C(0x163) /* Engine - Set the on-die RQE credit update location. */ #define HWRM_ENGINE_ON_DIE_RQE_CREDITS UINT32_C(0x164) /* Experimental */ #define HWRM_FUNC_RESOURCE_QCAPS UINT32_C(0x190) /* Experimental */ #define HWRM_FUNC_VF_RESOURCE_CFG UINT32_C(0x191) /* Experimental */ #define HWRM_FUNC_BACKING_STORE_QCAPS UINT32_C(0x192) /* Experimental */ #define HWRM_FUNC_BACKING_STORE_CFG UINT32_C(0x193) /* Experimental */ #define HWRM_FUNC_BACKING_STORE_QCFG UINT32_C(0x194) /* Experimental */ #define HWRM_SELFTEST_QLIST UINT32_C(0x200) /* Experimental */ #define HWRM_SELFTEST_EXEC UINT32_C(0x201) /* Experimental */ #define HWRM_SELFTEST_IRQ UINT32_C(0x202) /* Experimental */ #define HWRM_SELFTEST_RETRIEVE_SERDES_DATA UINT32_C(0x203) /* Experimental */ #define HWRM_PCIE_QSTATS UINT32_C(0x204) /* Experimental */ #define HWRM_DBG_READ_DIRECT UINT32_C(0xff10) /* Experimental */ #define HWRM_DBG_READ_INDIRECT UINT32_C(0xff11) /* Experimental */ #define HWRM_DBG_WRITE_DIRECT UINT32_C(0xff12) /* Experimental */ #define HWRM_DBG_WRITE_INDIRECT UINT32_C(0xff13) #define HWRM_DBG_DUMP UINT32_C(0xff14) /* Experimental */ #define HWRM_DBG_ERASE_NVM UINT32_C(0xff15) /* Experimental */ #define HWRM_DBG_CFG UINT32_C(0xff16) /* Experimental */ #define HWRM_DBG_COREDUMP_LIST UINT32_C(0xff17) /* Experimental */ #define HWRM_DBG_COREDUMP_INITIATE UINT32_C(0xff18) /* Experimental */ #define HWRM_DBG_COREDUMP_RETRIEVE UINT32_C(0xff19) /* */ #define HWRM_DBG_I2C_CMD UINT32_C(0xff1b) /* Experimental */ #define HWRM_NVM_FACTORY_DEFAULTS UINT32_C(0xffee) #define HWRM_NVM_VALIDATE_OPTION UINT32_C(0xffef) #define HWRM_NVM_FLUSH UINT32_C(0xfff0) #define HWRM_NVM_GET_VARIABLE UINT32_C(0xfff1) #define HWRM_NVM_SET_VARIABLE UINT32_C(0xfff2) #define HWRM_NVM_INSTALL_UPDATE UINT32_C(0xfff3) #define HWRM_NVM_MODIFY UINT32_C(0xfff4) #define HWRM_NVM_VERIFY_UPDATE UINT32_C(0xfff5) #define HWRM_NVM_GET_DEV_INFO UINT32_C(0xfff6) #define HWRM_NVM_ERASE_DIR_ENTRY UINT32_C(0xfff7) #define HWRM_NVM_MOD_DIR_ENTRY UINT32_C(0xfff8) #define HWRM_NVM_FIND_DIR_ENTRY UINT32_C(0xfff9) #define HWRM_NVM_GET_DIR_ENTRIES UINT32_C(0xfffa) #define HWRM_NVM_GET_DIR_INFO UINT32_C(0xfffb) #define HWRM_NVM_RAW_DUMP UINT32_C(0xfffc) #define HWRM_NVM_READ UINT32_C(0xfffd) #define HWRM_NVM_WRITE UINT32_C(0xfffe) #define HWRM_NVM_RAW_WRITE_BLK UINT32_C(0xffff) #define HWRM_LAST HWRM_NVM_RAW_WRITE_BLK uint16_t unused_0[3]; } __attribute__((packed)); /* Return Codes */ /* ret_codes (size:64b/8B) */ struct ret_codes { uint16_t error_code; /* Request was successfully executed by the HWRM. */ #define HWRM_ERR_CODE_SUCCESS UINT32_C(0x0) /* The HWRM failed to execute the request. */ #define HWRM_ERR_CODE_FAIL UINT32_C(0x1) /* * The request contains invalid argument(s) or input * parameters. */ #define HWRM_ERR_CODE_INVALID_PARAMS UINT32_C(0x2) /* * The requester is not allowed to access the requested * resource. This error code shall be provided in a * response to a request to query or modify an existing * resource that is not accessible by the requester. */ #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED UINT32_C(0x3) /* * The HWRM is unable to allocate the requested resource. * This code only applies to requests for HWRM resource * allocations. */ #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR UINT32_C(0x4) /* * Invalid combination of flags is specified in the * request. */ #define HWRM_ERR_CODE_INVALID_FLAGS UINT32_C(0x5) /* * Invalid combination of enables fields is specified in * the request. */ #define HWRM_ERR_CODE_INVALID_ENABLES UINT32_C(0x6) /* * Request contains a required TLV that is not supported by * the installed version of firmware. */ #define HWRM_ERR_CODE_UNSUPPORTED_TLV UINT32_C(0x7) /* * No firmware buffer available to accept the request. Driver * should retry the request. */ #define HWRM_ERR_CODE_NO_BUFFER UINT32_C(0x8) /* * Generic HWRM execution error that represents an * internal error. */ #define HWRM_ERR_CODE_HWRM_ERROR UINT32_C(0xf) /* Unknown error */ #define HWRM_ERR_CODE_UNKNOWN_ERR UINT32_C(0xfffe) /* Unsupported or invalid command */ #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED UINT32_C(0xffff) #define HWRM_ERR_CODE_LAST \ HWRM_ERR_CODE_CMD_NOT_SUPPORTED uint16_t unused_0[3]; } __attribute__((packed)); /* Output */ /* hwrm_err_output (size:128b/16B) */ struct hwrm_err_output { /* * Pass/Fail or error type * * Note: receiver to verify the in parameters, and fail the call * with an error when appropriate */ uint16_t error_code; /* This field returns the type of original request. */ uint16_t req_type; /* This field provides original sequence number of the command. */ uint16_t seq_id; /* * This field is the length of the response in bytes. The * last byte of the response is a valid flag that will read * as '1' when the command has been completely written to * memory. */ uint16_t resp_len; /* debug info for this error response. */ uint32_t opaque_0; /* debug info for this error response. */ uint16_t opaque_1; /* * In the case of an error response, command specific error * code is returned in this field. */ uint8_t cmd_err; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* * Following is the signature for HWRM message field that indicates not * applicable (All F's). Need to cast it the size of the field if needed. */ #define HWRM_NA_SIGNATURE ((uint32_t)(-1)) /* hwrm_func_buf_rgtr */ #define HWRM_MAX_REQ_LEN 128 /* hwrm_selftest_qlist */ #define HWRM_MAX_RESP_LEN 280 /* 7 bit indirection table index. */ #define HW_HASH_INDEX_SIZE 0x80 #define HW_HASH_KEY_SIZE 40 /* valid key for HWRM response */ #define HWRM_RESP_VALID_KEY 1 #define HWRM_VERSION_MAJOR 1 #define HWRM_VERSION_MINOR 9 #define HWRM_VERSION_UPDATE 2 /* non-zero means beta version */ #define HWRM_VERSION_RSVD 9 #define HWRM_VERSION_STR "1.9.2.9" /**************** * hwrm_ver_get * ****************/ /* hwrm_ver_get_input (size:192b/24B) */ struct hwrm_ver_get_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This field represents the major version of HWRM interface * specification supported by the driver HWRM implementation. * The interface major version is intended to change only when * non backward compatible changes are made to the HWRM * interface specification. */ uint8_t hwrm_intf_maj; /* * This field represents the minor version of HWRM interface * specification supported by the driver HWRM implementation. * A change in interface minor version is used to reflect * significant backward compatible modification to HWRM * interface specification. * This can be due to addition or removal of functionality. * HWRM interface specifications with the same major version * but different minor versions are compatible. */ uint8_t hwrm_intf_min; /* * This field represents the update version of HWRM interface * specification supported by the driver HWRM implementation. * The interface update version is used to reflect minor * changes or bug fixes to a released HWRM interface * specification. */ uint8_t hwrm_intf_upd; uint8_t unused_0[5]; } __attribute__((packed)); /* hwrm_ver_get_output (size:1408b/176B) */ struct hwrm_ver_get_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * This field represents the major version of HWRM interface * specification supported by the HWRM implementation. * The interface major version is intended to change only when * non backward compatible changes are made to the HWRM * interface specification. * A HWRM implementation that is compliant with this * specification shall provide value of 1 in this field. */ uint8_t hwrm_intf_maj_8b; /* * This field represents the minor version of HWRM interface * specification supported by the HWRM implementation. * A change in interface minor version is used to reflect * significant backward compatible modification to HWRM * interface specification. * This can be due to addition or removal of functionality. * HWRM interface specifications with the same major version * but different minor versions are compatible. * A HWRM implementation that is compliant with this * specification shall provide value of 2 in this field. */ uint8_t hwrm_intf_min_8b; /* * This field represents the update version of HWRM interface * specification supported by the HWRM implementation. * The interface update version is used to reflect minor * changes or bug fixes to a released HWRM interface * specification. * A HWRM implementation that is compliant with this * specification shall provide value of 2 in this field. */ uint8_t hwrm_intf_upd_8b; uint8_t hwrm_intf_rsvd_8b; /* * This field represents the major version of HWRM firmware. * A change in firmware major version represents a major * firmware release. */ uint8_t hwrm_fw_maj_8b; /* * This field represents the minor version of HWRM firmware. * A change in firmware minor version represents significant * firmware functionality changes. */ uint8_t hwrm_fw_min_8b; /* * This field represents the build version of HWRM firmware. * A change in firmware build version represents bug fixes * to a released firmware. */ uint8_t hwrm_fw_bld_8b; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version of the * HWRM firmware. */ uint8_t hwrm_fw_rsvd_8b; /* * This field represents the major version of mgmt firmware. * A change in major version represents a major release. */ uint8_t mgmt_fw_maj_8b; /* * This field represents the minor version of mgmt firmware. * A change in minor version represents significant * functionality changes. */ uint8_t mgmt_fw_min_8b; /* * This field represents the build version of mgmt firmware. * A change in update version represents bug fixes. */ uint8_t mgmt_fw_bld_8b; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ uint8_t mgmt_fw_rsvd_8b; /* * This field represents the major version of network * control firmware. * A change in major version represents a major release. */ uint8_t netctrl_fw_maj_8b; /* * This field represents the minor version of network * control firmware. * A change in minor version represents significant * functionality changes. */ uint8_t netctrl_fw_min_8b; /* * This field represents the build version of network * control firmware. * A change in update version represents bug fixes. */ uint8_t netctrl_fw_bld_8b; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ uint8_t netctrl_fw_rsvd_8b; /* * This field is used to indicate device's capabilities and * configurations. */ uint32_t dev_caps_cfg; /* * If set to 1, then secure firmware update behavior * is supported. * If set to 0, then secure firmware update behavior is * not supported. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED \ UINT32_C(0x1) /* * If set to 1, then firmware based DCBX agent is supported. * If set to 0, then firmware based DCBX agent capability * is not supported on this device. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, then HWRM short command format is supported. * If set to 0, then HWRM short command format is not supported. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, then HWRM short command format is required. * If set to 0, then HWRM short command format is not required. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_REQUIRED \ UINT32_C(0x8) /* * This field represents the major version of RoCE firmware. * A change in major version represents a major release. */ uint8_t roce_fw_maj_8b; /* * This field represents the minor version of RoCE firmware. * A change in minor version represents significant * functionality changes. */ uint8_t roce_fw_min_8b; /* * This field represents the build version of RoCE firmware. * A change in update version represents bug fixes. */ uint8_t roce_fw_bld_8b; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ uint8_t roce_fw_rsvd_8b; /* * This field represents the name of HWRM FW (ASCII chars * with NULL at the end). */ char hwrm_fw_name[16]; /* * This field represents the name of mgmt FW (ASCII chars * with NULL at the end). */ char mgmt_fw_name[16]; /* * This field represents the name of network control * firmware (ASCII chars with NULL at the end). */ char netctrl_fw_name[16]; /* * This field is reserved for future use. * The responder should set it to 0. * The requester should ignore this field. */ uint8_t reserved2[16]; /* * This field represents the name of RoCE FW (ASCII chars * with NULL at the end). */ char roce_fw_name[16]; /* This field returns the chip number. */ uint16_t chip_num; /* This field returns the revision of chip. */ uint8_t chip_rev; /* This field returns the chip metal number. */ uint8_t chip_metal; /* This field returns the bond id of the chip. */ uint8_t chip_bond_id; /* This value indicates the type of platform used for chip implementation. */ uint8_t chip_platform_type; /* ASIC */ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC UINT32_C(0x0) /* FPGA platform of the chip. */ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA UINT32_C(0x1) /* Palladium platform of the chip. */ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2) #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_LAST \ HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM /* * This field returns the maximum value of request window that * is supported by the HWRM. The request window is mapped * into device address space using MMIO. */ uint16_t max_req_win_len; /* * This field returns the maximum value of response buffer in * bytes. */ uint16_t max_resp_len; /* * This field returns the default request timeout value in * milliseconds. */ uint16_t def_req_timeout; /* * This field will indicate if any subsystems is not fully * initialized. */ uint8_t flags; /* * If set to 1, device is not ready. * If set to 0, device is ready to accept all HWRM commands. */ #define HWRM_VER_GET_OUTPUT_FLAGS_DEV_NOT_RDY UINT32_C(0x1) /* * If set to 1, external version present. * If set to 0, external version not present. */ #define HWRM_VER_GET_OUTPUT_FLAGS_EXT_VER_AVAIL UINT32_C(0x2) uint8_t unused_0[2]; /* * For backward compatibility this field must be set to 1. * Older drivers might look for this field to be 1 before * processing the message. */ uint8_t always_1; /* * This field represents the major version of HWRM interface * specification supported by the HWRM implementation. * The interface major version is intended to change only when * non backward compatible changes are made to the HWRM * interface specification. A HWRM implementation that is * compliant with this specification shall provide value of 1 * in this field. */ uint16_t hwrm_intf_major; /* * This field represents the minor version of HWRM interface * specification supported by the HWRM implementation. * A change in interface minor version is used to reflect * significant backward compatible modification to HWRM * interface specification. This can be due to addition or * removal of functionality. HWRM interface specifications * with the same major version but different minor versions are * compatible. A HWRM implementation that is compliant with * this specification shall provide value of 2 in this field. */ uint16_t hwrm_intf_minor; /* * This field represents the update version of HWRM interface * specification supported by the HWRM implementation. The * interface update version is used to reflect minor changes or * bug fixes to a released HWRM interface specification. * A HWRM implementation that is compliant with this * specification shall provide value of 2 in this field. */ uint16_t hwrm_intf_build; /* * This field represents the patch version of HWRM interface * specification supported by the HWRM implementation. */ uint16_t hwrm_intf_patch; /* * This field represents the major version of HWRM firmware. * A change in firmware major version represents a major * firmware release. */ uint16_t hwrm_fw_major; /* * This field represents the minor version of HWRM firmware. * A change in firmware minor version represents significant * firmware functionality changes. */ uint16_t hwrm_fw_minor; /* * This field represents the build version of HWRM firmware. * A change in firmware build version represents bug fixes to * a released firmware. */ uint16_t hwrm_fw_build; /* * This field is a reserved field. * This field can be used to represent firmware branches or customer * specific releases tied to a specific (major,minor,update) version * of the HWRM firmware. */ uint16_t hwrm_fw_patch; /* * This field represents the major version of mgmt firmware. * A change in major version represents a major release. */ uint16_t mgmt_fw_major; /* * This field represents the minor version of HWRM firmware. * A change in firmware minor version represents significant * firmware functionality changes. */ uint16_t mgmt_fw_minor; /* * This field represents the build version of mgmt firmware. * A change in update version represents bug fixes. */ uint16_t mgmt_fw_build; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version. */ uint16_t mgmt_fw_patch; /* * This field represents the major version of network control * firmware. A change in major version represents * a major release. */ uint16_t netctrl_fw_major; /* * This field represents the minor version of network control * firmware. A change in minor version represents significant * functionality changes. */ uint16_t netctrl_fw_minor; /* * This field represents the build version of network control * firmware. A change in update version represents bug fixes. */ uint16_t netctrl_fw_build; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ uint16_t netctrl_fw_patch; /* * This field represents the major version of RoCE firmware. * A change in major version represents a major release. */ uint16_t roce_fw_major; /* * This field represents the minor version of RoCE firmware. * A change in minor version represents significant * functionality changes. */ uint16_t roce_fw_minor; /* * This field represents the build version of RoCE firmware. * A change in update version represents bug fixes. */ uint16_t roce_fw_build; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ uint16_t roce_fw_patch; /* * This field returns the maximum extended request length acceptable * by the device which allows requests greater than mailbox size when * used with the short cmd request format. */ uint16_t max_ext_req_len; uint8_t unused_1[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* bd_base (size:64b/8B) */ struct bd_base { uint8_t type; /* This value identifies the type of buffer descriptor. */ #define BD_BASE_TYPE_MASK UINT32_C(0x3f) #define BD_BASE_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is used for * normal L2 packet transmission. */ #define BD_BASE_TYPE_TX_BD_SHORT UINT32_C(0x0) /* * Indicates that this BD is 1BB long and is an empty * TX BD. Not valid for use by the driver. */ #define BD_BASE_TYPE_TX_BD_EMPTY UINT32_C(0x1) /* * Indicates that this BD is 16B long and is an RX Producer * (ie. empty) buffer descriptor. */ #define BD_BASE_TYPE_RX_PROD_PKT UINT32_C(0x4) /* * Indicates that this BD is 16B long and is an RX * Producer Buffer BD. */ #define BD_BASE_TYPE_RX_PROD_BFR UINT32_C(0x5) /* * Indicates that this BD is 16B long and is an * RX Producer Assembly Buffer Descriptor. */ #define BD_BASE_TYPE_RX_PROD_AGG UINT32_C(0x6) /* * Indicates that this BD is 32B long and is used for * normal L2 packet transmission. */ #define BD_BASE_TYPE_TX_BD_LONG UINT32_C(0x10) #define BD_BASE_TYPE_LAST BD_BASE_TYPE_TX_BD_LONG uint8_t unused_1[7]; } __attribute__((packed)); /* tx_bd_short (size:128b/16B) */ struct tx_bd_short { /* * All bits in this field must be valid on the first BD of a packet. * Only the packet_end bit must be valid for the remaining BDs * of a packet. */ uint16_t flags_type; /* This value identifies the type of buffer descriptor. */ #define TX_BD_SHORT_TYPE_MASK UINT32_C(0x3f) #define TX_BD_SHORT_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is used for * normal L2 packet transmission. */ #define TX_BD_SHORT_TYPE_TX_BD_SHORT UINT32_C(0x0) #define TX_BD_SHORT_TYPE_LAST TX_BD_SHORT_TYPE_TX_BD_SHORT /* * All bits in this field must be valid on the first BD of a packet. * Only the packet_end bit must be valid for the remaining BDs * of a packet. */ #define TX_BD_SHORT_FLAGS_MASK UINT32_C(0xffc0) #define TX_BD_SHORT_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40) /* * If set to 1, the device will not generate a completion for * this transmit packet unless there is an error in it's * processing. * If this bit * is set to 0, then the packet will be completed normally. * * This bit must be valid only on the first BD of a packet. */ #define TX_BD_SHORT_FLAGS_NO_CMPL UINT32_C(0x80) /* * This value indicates how many 16B BD locations are consumed * in the ring by this packet. * A value of 1 indicates that this BD is the only BD (and that * the it is a short BD). A value * of 3 indicates either 3 short BDs or 1 long BD and one short * BD in the packet. A value of 0 indicates * that there are 32 BD locations in the packet (the maximum). * * This field is valid only on the first BD of a packet. */ #define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) #define TX_BD_SHORT_FLAGS_BD_CNT_SFT 8 /* * This value is a hint for the length of the entire packet. * It is used by the chip to optimize internal processing. * * The packet will be dropped if the hint is too short. * * This field is valid only on the first BD of a packet. */ #define TX_BD_SHORT_FLAGS_LHINT_MASK UINT32_C(0x6000) #define TX_BD_SHORT_FLAGS_LHINT_SFT 13 /* indicates packet length < 512B */ #define TX_BD_SHORT_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) /* indicates 512 <= packet length < 1KB */ #define TX_BD_SHORT_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) /* indicates 1KB <= packet length < 2KB */ #define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) /* indicates packet length >= 2KB */ #define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) #define TX_BD_SHORT_FLAGS_LHINT_LAST \ TX_BD_SHORT_FLAGS_LHINT_GTE2K /* * If set to 1, the device immediately updates the Send Consumer * Index after the buffer associated with this descriptor has * been transferred via DMA to NIC memory from host memory. An * interrupt may or may not be generated according to the state * of the interrupt avoidance mechanisms. If this bit * is set to 0, then the Consumer Index is only updated as soon * as one of the host interrupt coalescing conditions has been met. * * This bit must be valid on the first BD of a packet. */ #define TX_BD_SHORT_FLAGS_COAL_NOW UINT32_C(0x8000) /* * This is the length of the host physical buffer this BD describes * in bytes. * * This field must be valid on all BDs of a packet. */ uint16_t len; /* * The opaque data field is pass through to the completion and can be * used for any data that the driver wants to associate with the * transmit BD. * * This field must be valid on the first BD of a packet. */ uint32_t opaque; /* * This is the host physical address for the portion of the packet * described by this TX BD. * * This value must be valid on all BDs of a packet. */ uint64_t address; } __attribute__((packed)); /* tx_bd_long (size:128b/16B) */ struct tx_bd_long { /* This value identifies the type of buffer descriptor. */ uint16_t flags_type; /* * This value indicates the type of buffer descriptor. * packet. */ #define TX_BD_LONG_TYPE_MASK UINT32_C(0x3f) #define TX_BD_LONG_TYPE_SFT 0 /* * Indicates that this BD is 32B long and is used for * normal L2 packet transmission. */ #define TX_BD_LONG_TYPE_TX_BD_LONG UINT32_C(0x10) #define TX_BD_LONG_TYPE_LAST TX_BD_LONG_TYPE_TX_BD_LONG /* * All bits in this field must be valid on the first BD of a packet. * Only the packet_end bit must be valid for the remaining BDs * of a packet. */ #define TX_BD_LONG_FLAGS_MASK UINT32_C(0xffc0) #define TX_BD_LONG_FLAGS_SFT 6 /* * If set to 1, the packet ends with the data in the buffer * pointed to by this descriptor. This flag must be * valid on every BD. */ #define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40) /* * If set to 1, the device will not generate a completion for * this transmit packet unless there is an error in it's * processing. * If this bit * is set to 0, then the packet will be completed normally. * * This bit must be valid only on the first BD of a packet. */ #define TX_BD_LONG_FLAGS_NO_CMPL UINT32_C(0x80) /* * This value indicates how many 16B BD locations are consumed * in the ring by this packet. * A value of 1 indicates that this BD is the only BD (and that * the it is a short BD). A value * of 3 indicates either 3 short BDs or 1 long BD and one short * BD in the packet. A value of 0 indicates * that there are 32 BD locations in the packet (the maximum). * * This field is valid only on the first BD of a packet. */ #define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) #define TX_BD_LONG_FLAGS_BD_CNT_SFT 8 /* * This value is a hint for the length of the entire packet. * It is used by the chip to optimize internal processing. * * The packet will be dropped if the hint is too short. * * This field is valid only on the first BD of a packet. */ #define TX_BD_LONG_FLAGS_LHINT_MASK UINT32_C(0x6000) #define TX_BD_LONG_FLAGS_LHINT_SFT 13 /* indicates packet length < 512B */ #define TX_BD_LONG_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) /* indicates 512 <= packet length < 1KB */ #define TX_BD_LONG_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) /* indicates 1KB <= packet length < 2KB */ #define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) /* indicates packet length >= 2KB */ #define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) #define TX_BD_LONG_FLAGS_LHINT_LAST TX_BD_LONG_FLAGS_LHINT_GTE2K /* * If set to 1, the device immediately updates the Send Consumer * Index after the buffer associated with this descriptor has * been transferred via DMA to NIC memory from host memory. An * interrupt may or may not be generated according to the state * of the interrupt avoidance mechanisms. If this bit * is set to 0, then the Consumer Index is only updated as soon * as one of the host interrupt coalescing conditions has been met. * * This bit must be valid on the first BD of a packet. */ #define TX_BD_LONG_FLAGS_COAL_NOW UINT32_C(0x8000) /* * This is the length of the host physical buffer this BD describes * in bytes. * * This field must be valid on all BDs of a packet. */ uint16_t len; /* * The opaque data field is pass through to the completion and can be * used for any data that the driver wants to associate with the * transmit BD. * * This field must be valid on the first BD of a packet. */ uint32_t opaque; /* * This is the host physical address for the portion of the packet * described by this TX BD. * * This value must be valid on all BDs of a packet. */ uint64_t address; } __attribute__((packed)); /* tx_bd_long_hi (size:128b/16B) */ struct tx_bd_long_hi { /* * All bits in this field must be valid on the first BD of a packet. * Their value on other BDs of the packet will be ignored. */ uint16_t lflags; /* * If set to 1, the controller replaces the TCP/UPD checksum * fields of normal TCP/UPD checksum, or the inner TCP/UDP * checksum field of the encapsulated TCP/UDP packets with the * hardware calculated TCP/UDP checksum for the packet associated * with this descriptor. The flag is ignored if the LSO flag is set. * * This bit must be valid on the first BD of a packet. */ #define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1) /* * If set to 1, the controller replaces the IP checksum of the * normal packets, or the inner IP checksum of the encapsulated * packets with the hardware calculated IP checksum for the * packet associated with this descriptor. * * This bit must be valid on the first BD of a packet. */ #define TX_BD_LONG_LFLAGS_IP_CHKSUM UINT32_C(0x2) /* * If set to 1, the controller will not append an Ethernet CRC * to the end of the frame. * * This bit must be valid on the first BD of a packet. * * Packet must be 64B or longer when this flag is set. It is not * useful to use this bit with any form of TX offload such as * CSO or LSO. The intent is that the packet from the host already * has a valid Ethernet CRC on the packet. */ #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4) /* * If set to 1, the device will record the time at which the packet * was actually transmitted at the TX MAC. * * This bit must be valid on the first BD of a packet. */ #define TX_BD_LONG_LFLAGS_STAMP UINT32_C(0x8) /* * If set to 1, The controller replaces the tunnel IP checksum * field with hardware calculated IP checksum for the IP header * of the packet associated with this descriptor. * * For outer UDP checksum, global outer UDP checksum TE_NIC register * needs to be enabled. If the global outer UDP checksum TE_NIC register * bit is set, outer UDP checksum will be calculated for the following * cases: * 1. Packets with tcp_udp_chksum flag set to offload checksum for inner * packet AND the inner packet is TCP/UDP. If the inner packet is ICMP for * example (non-TCP/UDP), even if the tcp_udp_chksum is set, the outer UDP * checksum will not be calculated. * 2. Packets with lso flag set which implies inner TCP checksum calculation * as part of LSO operation. */ #define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10) /* * If set to 1, the device will treat this packet with LSO(Large * Send Offload) processing for both normal or encapsulated * packets, which is a form of TCP segmentation. When this bit * is 1, the hdr_size and mss fields must be valid. The driver * doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum * flags since the controller will replace the appropriate * checksum fields for segmented packets. * * When this bit is 1, the hdr_size and mss fields must be valid. */ #define TX_BD_LONG_LFLAGS_LSO UINT32_C(0x20) /* * If set to zero when LSO is '1', then the IPID will be treated * as a 16b number and will be wrapped if it exceeds a value of * 0xffff. * * If set to one when LSO is '1', then the IPID will be treated * as a 15b number and will be wrapped if it exceeds a value 0f * 0x7fff. */ #define TX_BD_LONG_LFLAGS_IPID_FMT UINT32_C(0x40) /* * If set to zero when LSO is '1', then the IPID of the tunnel * IP header will not be modified during LSO operations. * * If set to one when LSO is '1', then the IPID of the tunnel * IP header will be incremented for each subsequent segment of an * LSO operation. * * The flag is ignored if the LSO packet is a normal (non-tunneled) * TCP packet. */ #define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80) /* * If set to '1', then the RoCE ICRC will be appended to the * packet. Packet must be a valid RoCE format packet. */ #define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100) /* * If set to '1', then the FCoE CRC will be appended to the * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200) uint16_t hdr_size; /* * When LSO is '1', this field must contain the offset of the * TCP payload from the beginning of the packet in as * 16b words. In case of encapsulated/tunneling packet, this field * contains the offset of the inner TCP payload from beginning of the * packet as 16-bit words. * * This value must be valid on the first BD of a packet. */ #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff) #define TX_BD_LONG_HDR_SIZE_SFT 0 uint32_t mss; /* * This is the MSS value that will be used to do the LSO processing. * The value is the length in bytes of the TCP payload for each * segment generated by the LSO operation. * * This value must be valid on the first BD of a packet. */ #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff) #define TX_BD_LONG_MSS_SFT 0 uint16_t unused2; /* * This value selects a CFA action to perform on the packet. * Set this value to zero if no CFA action is desired. * * This value must be valid on the first BD of a packet. */ uint16_t cfa_action; /* * This value is action meta-data that defines CFA edit operations * that are done in addition to any action editing. */ uint32_t cfa_meta; /* When key=1, This is the VLAN tag VID value. */ #define TX_BD_LONG_CFA_META_VLAN_VID_MASK UINT32_C(0xfff) #define TX_BD_LONG_CFA_META_VLAN_VID_SFT 0 /* When key=1, This is the VLAN tag DE value. */ #define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000) /* When key=1, This is the VLAN tag PRI value. */ #define TX_BD_LONG_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000) #define TX_BD_LONG_CFA_META_VLAN_PRI_SFT 13 /* When key=1, This is the VLAN tag TPID select value. */ #define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000) #define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16 /* 0x88a8 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16) /* 0x8100 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16) /* 0x9100 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16) /* 0x9200 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16) /* 0x9300 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16) /* Value programmed in CFA VLANTPID register. */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16) #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \ TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG /* When key=1, This is the VLAN tag TPID select value. */ #define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000) #define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT 19 /* * This field identifies the type of edit to be performed * on the packet. * * This value must be valid on the first BD of a packet. */ #define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000) #define TX_BD_LONG_CFA_META_KEY_SFT 28 /* No editing */ #define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28) /* * - meta[17:16] - TPID select value (0 = 0x8100). * - meta[15:12] - PRI/DE value. * - meta[11:0] - VID value. */ #define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28) #define TX_BD_LONG_CFA_META_KEY_LAST \ TX_BD_LONG_CFA_META_KEY_VLAN_TAG } __attribute__((packed)); /* tx_bd_empty (size:128b/16B) */ struct tx_bd_empty { /* This value identifies the type of buffer descriptor. */ uint8_t type; #define TX_BD_EMPTY_TYPE_MASK UINT32_C(0x3f) #define TX_BD_EMPTY_TYPE_SFT 0 /* * Indicates that this BD is 1BB long and is an empty * TX BD. Not valid for use by the driver. */ #define TX_BD_EMPTY_TYPE_TX_BD_EMPTY UINT32_C(0x1) #define TX_BD_EMPTY_TYPE_LAST TX_BD_EMPTY_TYPE_TX_BD_EMPTY uint8_t unused_1[3]; uint8_t unused_2; uint8_t unused_3[3]; uint8_t unused_4[8]; } __attribute__((packed)); /* rx_prod_pkt_bd (size:128b/16B) */ struct rx_prod_pkt_bd { /* This value identifies the type of buffer descriptor. */ uint16_t flags_type; /* This value identifies the type of buffer descriptor. */ #define RX_PROD_PKT_BD_TYPE_MASK UINT32_C(0x3f) #define RX_PROD_PKT_BD_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is an RX Producer * (ie. empty) buffer descriptor. */ #define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4) #define RX_PROD_PKT_BD_TYPE_LAST \ RX_PROD_PKT_BD_TYPE_RX_PROD_PKT #define RX_PROD_PKT_BD_FLAGS_MASK UINT32_C(0xffc0) #define RX_PROD_PKT_BD_FLAGS_SFT 6 /* * If set to 1, the packet will be placed at the address plus * 2B. The 2 Bytes of padding will be written as zero. */ #define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40) /* * If set to 1, the packet write will be padded out to the * nearest cache-line with zero value padding. */ #define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80) /* * This value is the number of additional buffers in the ring that * describe the buffer space to be consumed for the this packet. * If the value is zero, then the packet must fit within the * space described by this BD. If this value is 1 or more, it * indicates how many additional "buffer" BDs are in the ring * immediately following this BD to be used for the same * network packet. * * Even if the packet to be placed does not need all the * additional buffers, they will be consumed anyway. */ #define RX_PROD_PKT_BD_FLAGS_BUFFERS_MASK UINT32_C(0x300) #define RX_PROD_PKT_BD_FLAGS_BUFFERS_SFT 8 /* * This is the length in Bytes of the host physical buffer where * data for the packet may be placed in host memory. */ uint16_t len; /* * The opaque data field is pass through to the completion and can be * used for any data that the driver wants to associate with this * receive buffer set. */ uint32_t opaque; /* * This is the host physical address where data for the packet may * by placed in host memory. */ uint64_t address; } __attribute__((packed)); /* rx_prod_bfr_bd (size:128b/16B) */ struct rx_prod_bfr_bd { /* This value identifies the type of buffer descriptor. */ uint16_t flags_type; /* This value identifies the type of buffer descriptor. */ #define RX_PROD_BFR_BD_TYPE_MASK UINT32_C(0x3f) #define RX_PROD_BFR_BD_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is an RX * Producer Buffer BD. */ #define RX_PROD_BFR_BD_TYPE_RX_PROD_BFR UINT32_C(0x5) #define RX_PROD_BFR_BD_TYPE_LAST RX_PROD_BFR_BD_TYPE_RX_PROD_BFR #define RX_PROD_BFR_BD_FLAGS_MASK UINT32_C(0xffc0) #define RX_PROD_BFR_BD_FLAGS_SFT 6 /* * This is the length in Bytes of the host physical buffer where * data for the packet may be placed in host memory. */ uint16_t len; /* This field is not used. */ uint32_t opaque; /* * This is the host physical address where data for the packet may * by placed in host memory. */ uint64_t address; } __attribute__((packed)); /* rx_prod_agg_bd (size:128b/16B) */ struct rx_prod_agg_bd { /* This value identifies the type of buffer descriptor. */ uint16_t flags_type; /* This value identifies the type of buffer descriptor. */ #define RX_PROD_AGG_BD_TYPE_MASK UINT32_C(0x3f) #define RX_PROD_AGG_BD_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is an * RX Producer Assembly Buffer Descriptor. */ #define RX_PROD_AGG_BD_TYPE_RX_PROD_AGG UINT32_C(0x6) #define RX_PROD_AGG_BD_TYPE_LAST \ RX_PROD_AGG_BD_TYPE_RX_PROD_AGG #define RX_PROD_AGG_BD_FLAGS_MASK UINT32_C(0xffc0) #define RX_PROD_AGG_BD_FLAGS_SFT 6 /* * If set to 1, the packet write will be padded out to the * nearest cache-line with zero value padding. */ #define RX_PROD_AGG_BD_FLAGS_EOP_PAD UINT32_C(0x40) /* * This is the length in Bytes of the host physical buffer where * data for the packet may be placed in host memory. */ uint16_t len; /* * The opaque data field is pass through to the completion and can be * used for any data that the driver wants to associate with this * receive assembly buffer. */ uint32_t opaque; /* * This is the host physical address where data for the packet may * by placed in host memory. */ uint64_t address; } __attribute__((packed)); /* cmpl_base (size:128b/16B) */ struct cmpl_base { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define CMPL_BASE_TYPE_MASK UINT32_C(0x3f) #define CMPL_BASE_TYPE_SFT 0 /* * TX L2 completion: * Completion of TX packet. Length = 16B */ #define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0) /* * RX L2 completion: * Completion of and L2 RX packet. Length = 32B */ #define CMPL_BASE_TYPE_RX_L2 UINT32_C(0x11) /* * RX Aggregation Buffer completion : * Completion of an L2 aggregation buffer in support of * TPA, HDS, or Jumbo packet completion. Length = 16B */ #define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12) /* * RX L2 TPA Start Completion: * Completion at the beginning of a TPA operation. * Length = 32B */ #define CMPL_BASE_TYPE_RX_TPA_START UINT32_C(0x13) /* * RX L2 TPA End Completion: * Completion at the end of a TPA operation. * Length = 32B */ #define CMPL_BASE_TYPE_RX_TPA_END UINT32_C(0x15) /* * Statistics Ejection Completion: * Completion of statistics data ejection buffer. * Length = 16B */ #define CMPL_BASE_TYPE_STAT_EJECT UINT32_C(0x1a) /* * HWRM Command Completion: * Completion of an HWRM command. */ #define CMPL_BASE_TYPE_HWRM_DONE UINT32_C(0x20) /* Forwarded HWRM Request */ #define CMPL_BASE_TYPE_HWRM_FWD_REQ UINT32_C(0x22) /* Forwarded HWRM Response */ #define CMPL_BASE_TYPE_HWRM_FWD_RESP UINT32_C(0x24) /* HWRM Asynchronous Event Information */ #define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e) /* CQ Notification */ #define CMPL_BASE_TYPE_CQ_NOTIFICATION UINT32_C(0x30) /* SRQ Threshold Event */ #define CMPL_BASE_TYPE_SRQ_EVENT UINT32_C(0x32) /* DBQ Threshold Event */ #define CMPL_BASE_TYPE_DBQ_EVENT UINT32_C(0x34) /* QP Async Notification */ #define CMPL_BASE_TYPE_QP_EVENT UINT32_C(0x38) /* Function Async Notification */ #define CMPL_BASE_TYPE_FUNC_EVENT UINT32_C(0x3a) #define CMPL_BASE_TYPE_LAST CMPL_BASE_TYPE_FUNC_EVENT /* info1 is 16 b */ uint16_t info1; /* info2 is 32 b */ uint32_t info2; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ uint32_t info3_v; #define CMPL_BASE_V UINT32_C(0x1) #define CMPL_BASE_INFO3_MASK UINT32_C(0xfffffffe) #define CMPL_BASE_INFO3_SFT 1 /* info4 is 32 b */ uint32_t info4; } __attribute__((packed)); /* tx_cmpl (size:128b/16B) */ struct tx_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define TX_CMPL_TYPE_MASK UINT32_C(0x3f) #define TX_CMPL_TYPE_SFT 0 /* * TX L2 completion: * Completion of TX packet. Length = 16B */ #define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0) #define TX_CMPL_TYPE_LAST TX_CMPL_TYPE_TX_L2 #define TX_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define TX_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an * error of some type. Type of error is indicated in * error_flags. */ #define TX_CMPL_FLAGS_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet completed * was transmitted using the push acceleration data provided * by the driver. When this bit is '0', it indicates that the * packet had not push acceleration data written or was executed * as a normal packet even though push data was provided. */ #define TX_CMPL_FLAGS_PUSH UINT32_C(0x80) /* unused1 is 16 b */ uint16_t unused_0; /* * This is a copy of the opaque field from the first TX BD of this * transmitted packet. */ uint32_t opaque; uint16_t errors_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define TX_CMPL_V UINT32_C(0x1) #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe) #define TX_CMPL_ERRORS_SFT 1 /* * This error indicates that there was some sort of problem * with the BDs for the packet. */ #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* No error */ #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1) /* * Bad Format: * BDs were not formatted correctly. */ #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1) #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \ TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT /* * When this bit is '1', it indicates that the length of * the packet was zero. No packet was transmitted. */ #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10) /* * When this bit is '1', it indicates that the packet * was longer than the programmed limit in TDI. No * packet was transmitted. */ #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20) /* * When this bit is '1', it indicates that one or more of the * BDs associated with this packet generated a PCI error. * This probably means the address was not valid. */ #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet was longer * than indicated by the hint. No packet was transmitted. */ #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80) /* * When this bit is '1', it indicates that the packet was * dropped due to Poison TLP error on one or more of the * TLPs in the PXP completion. */ #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100) /* unused2 is 16 b */ uint16_t unused_1; /* unused3 is 32 b */ uint32_t unused_2; } __attribute__((packed)); /* rx_pkt_cmpl (size:128b/16B) */ struct rx_pkt_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f) #define RX_PKT_CMPL_TYPE_SFT 0 /* * RX L2 completion: * Completion of and L2 RX packet. Length = 32B */ #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11) #define RX_PKT_CMPL_TYPE_LAST RX_PKT_CMPL_TYPE_RX_L2 #define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define RX_PKT_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an * error of some type. Type of error is indicated in * error_flags. */ #define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) #define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Normal: * Packet was placed using normal algorithm. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7) /* * Jumbo: * Packet was placed using jumbo algorithm. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7) /* * Header/Data Separation: * Packet was placed using Header/Data separation algorithm. * The separation location is indicated by the itype field. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7) #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \ RX_PKT_CMPL_FLAGS_PLACEMENT_HDS /* This bit is '1' if the RSS field in this completion is valid. */ #define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) /* unused is 1 b */ #define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800) /* * This value indicates what the inner packet determined for the * packet was. */ #define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) #define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12 /* * Not Known: * Indicates that the packet type was not known. */ #define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN \ (UINT32_C(0x0) << 12) /* * IP Packet: * Indicates that the packet was an IP packet, but further * classification was not possible. */ #define RX_PKT_CMPL_FLAGS_ITYPE_IP \ (UINT32_C(0x1) << 12) /* * TCP Packet: * Indicates that the packet was IP and TCP. * This indicates that the payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_TCP \ (UINT32_C(0x2) << 12) /* * UDP Packet: * Indicates that the packet was IP and UDP. * This indicates that the payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_UDP \ (UINT32_C(0x3) << 12) /* * FCoE Packet: * Indicates that the packet was recognized as a FCoE. * This also indicates that the payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_FCOE \ (UINT32_C(0x4) << 12) /* * RoCE Packet: * Indicates that the packet was recognized as a RoCE. * This also indicates that the payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_ROCE \ (UINT32_C(0x5) << 12) /* * ICMP Packet: * Indicates that the packet was recognized as ICMP. * This indicates that the payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_ICMP \ (UINT32_C(0x7) << 12) /* * PtP packet wo/timestamp: * Indicates that the packet was recognized as a PtP * packet. */ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP \ (UINT32_C(0x8) << 12) /* * PtP packet w/timestamp: * Indicates that the packet was recognized as a PtP * packet and that a timestamp was taken for the packet. */ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP \ (UINT32_C(0x9) << 12) #define RX_PKT_CMPL_FLAGS_ITYPE_LAST \ RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP /* * This is the length of the data for the packet stored in the * buffer(s) identified by the opaque value. This includes * the packet BD and any associated buffer BDs. This does not include * the the length of any data places in aggregation BDs. */ uint16_t len; /* * This is a copy of the opaque field from the RX BD this completion * corresponds to. */ uint32_t opaque; uint8_t agg_bufs_v1; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V1 UINT32_C(0x1) /* * This value is the number of aggregation buffers that follow this * entry in the completion ring that are a part of this packet. * If the value is zero, then the packet is completely contained * in the buffer space provided for the packet in the RX ring. */ #define RX_PKT_CMPL_AGG_BUFS_MASK UINT32_C(0x3e) #define RX_PKT_CMPL_AGG_BUFS_SFT 1 /* unused1 is 2 b */ #define RX_PKT_CMPL_UNUSED1_MASK UINT32_C(0xc0) #define RX_PKT_CMPL_UNUSED1_SFT 6 /* * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. * * The value of tuple_extrac_op provides the information about * what fields the hash was computed on. * * 0: The RSS hash was computed over source IP address, * destination IP address, source port, and destination port of inner * IP and TCP or UDP headers. Note: For non-tunneled packets, * the packet headers are considered inner packet headers for the RSS * hash computation purpose. * * 1: The RSS hash was computed over source IP address and destination * IP address of inner IP header. Note: For non-tunneled packets, * the packet headers are considered inner packet headers for the RSS * hash computation purpose. * * 2: The RSS hash was computed over source IP address, * destination IP address, source port, and destination port of * IP and TCP or UDP headers of outer tunnel headers. * Note: For non-tunneled packets, this value is not applicable. * * 3: The RSS hash was computed over source IP address and * destination IP address of IP header of outer tunnel headers. * Note: For non-tunneled packets, this value is not applicable. * * Note that 4-tuples values listed above are applicable * for layer 4 protocols supported and enabled for RSS in the hardware, * HWRM firmware, and drivers. For example, if RSS hash is supported and * enabled for TCP traffic only, then the values of tuple_extract_op * corresponding to 4-tuples are only valid for TCP traffic. */ uint8_t rss_hash_type; /* * This value indicates the offset in bytes from the beginning of the packet * where the inner payload starts. This value is valid for TCP, UDP, * FCoE, and RoCE packets. * * A value of zero indicates that header is 256B into the packet. */ uint8_t payload_offset; /* unused2 is 8 b */ uint8_t unused1; /* * This value is the RSS hash value calculated for the packet * based on the mode bits and key value in the VNIC. */ uint32_t rss_hash; } __attribute__((packed)); /* rx_pkt_cmpl_hi (size:128b/16B) */ struct rx_pkt_cmpl_hi { uint32_t flags2; /* * This indicates that the ip checksum was calculated for the * inner packet and that the ip_cs_error field indicates if there * was an error. */ #define RX_PKT_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) /* * This indicates that the TCP, UDP or ICMP checksum was * calculated for the inner packet and that the l4_cs_error field * indicates if there was an error. */ #define RX_PKT_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) /* * This indicates that the ip checksum was calculated for the * tunnel header and that the t_ip_cs_error field indicates if there * was an error. */ #define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) /* * This indicates that the UDP checksum was * calculated for the tunnel packet and that the t_l4_cs_error field * indicates if there was an error. */ #define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) /* This value indicates what format the metadata field is. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) #define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4 /* No metadata informtaion. Value is zero. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4) /* * The metadata field contains the VLAN tag and TPID value. * - metadata[11:0] contains the vlan VID value. * - metadata[12] contains the vlan DE value. * - metadata[15:13] contains the vlan PRI value. * - metadata[31:16] contains the vlan TPID value. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4) #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \ RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN /* * This field indicates the IP type for the inner-most IP header. * A value of '0' indicates IPv4. A value of '1' indicates IPv6. * This value is only valid if itype indicates a packet * with an IP header. */ #define RX_PKT_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) /* * This is data from the CFA block as indicated by the meta_format * field. */ uint32_t metadata; /* When meta_format=1, this value is the VLAN VID. */ #define RX_PKT_CMPL_METADATA_VID_MASK UINT32_C(0xfff) #define RX_PKT_CMPL_METADATA_VID_SFT 0 /* When meta_format=1, this value is the VLAN DE. */ #define RX_PKT_CMPL_METADATA_DE UINT32_C(0x1000) /* When meta_format=1, this value is the VLAN PRI. */ #define RX_PKT_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) #define RX_PKT_CMPL_METADATA_PRI_SFT 13 /* When meta_format=1, this value is the VLAN TPID. */ #define RX_PKT_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) #define RX_PKT_CMPL_METADATA_TPID_SFT 16 uint16_t errors_v2; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V2 \ UINT32_C(0x1) #define RX_PKT_CMPL_ERRORS_MASK \ UINT32_C(0xfffe) #define RX_PKT_CMPL_ERRORS_SFT 1 /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the * packet was already placed. The packet should be treated as * invalid. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK \ UINT32_C(0xe) #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* No buffer error */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER \ (UINT32_C(0x0) << 1) /* * Did Not Fit: * Packet did not fit into packet buffer provided. * For regular placement, this means the packet did not fit * in the buffer provided. For HDS and jumbo placement, this * means that the packet could not be placed into 7 physical * buffers or less. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \ (UINT32_C(0x1) << 1) /* * Not On Chip: * All BDs needed for the packet were not on-chip when * the packet arrived. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ (UINT32_C(0x2) << 1) /* * Bad Format: * BDs were not formatted correctly. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ (UINT32_C(0x3) << 1) #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \ RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT /* * This indicates that there was an error in the IP header * checksum. */ #define RX_PKT_CMPL_ERRORS_IP_CS_ERROR \ UINT32_C(0x10) /* * This indicates that there was an error in the TCP, UDP * or ICMP checksum. */ #define RX_PKT_CMPL_ERRORS_L4_CS_ERROR \ UINT32_C(0x20) /* * This indicates that there was an error in the tunnel * IP header checksum. */ #define RX_PKT_CMPL_ERRORS_T_IP_CS_ERROR \ UINT32_C(0x40) /* * This indicates that there was an error in the tunnel * UDP checksum. */ #define RX_PKT_CMPL_ERRORS_T_L4_CS_ERROR \ UINT32_C(0x80) /* * This indicates that there was a CRC error on either an FCoE * or RoCE packet. The itype indicates the packet type. */ #define RX_PKT_CMPL_ERRORS_CRC_ERROR \ UINT32_C(0x100) /* * This indicates that there was an error in the tunnel * portion of the packet when this * field is non-zero. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_MASK \ UINT32_C(0xe00) #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT 9 /* * No additional error occurred on the tunnel portion * of the packet of the packet does not have a tunnel. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR \ (UINT32_C(0x0) << 9) /* * Indicates that IP header version does not match * expectation from L2 Ethertype for IPv4 and IPv6 * in the tunnel header. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \ (UINT32_C(0x1) << 9) /* * Indicates that header length is out of range in the * tunnel header. Valid for * IPv4. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \ (UINT32_C(0x2) << 9) /* * Indicates that the physical packet is shorter than that * claimed by the PPPoE header length for a tunnel PPPoE * packet. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \ (UINT32_C(0x3) << 9) /* * Indicates that physical packet is shorter than that claimed * by the tunnel l3 header length. Valid for IPv4, or IPv6 * tunnel packet packets. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \ (UINT32_C(0x4) << 9) /* * Indicates that the physical packet is shorter than that * claimed by the tunnel UDP header length for a tunnel * UDP packet that is not fragmented. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \ (UINT32_C(0x5) << 9) /* * indicates that the IPv4 TTL or IPv6 hop limit check * have failed (e.g. TTL = 0) in the tunnel header. Valid * for IPv4, and IPv6. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \ (UINT32_C(0x6) << 9) #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \ RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL /* * This indicates that there was an error in the inner * portion of the packet when this * field is non-zero. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_MASK \ UINT32_C(0xf000) #define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT 12 /* * No additional error occurred on the tunnel portion * of the packet of the packet does not have a tunnel. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR \ (UINT32_C(0x0) << 12) /* * Indicates that IP header version does not match * expectation from L2 Ethertype for IPv4 and IPv6 or that * option other than VFT was parsed on * FCoE packet. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \ (UINT32_C(0x1) << 12) /* * indicates that header length is out of range. Valid for * IPv4 and RoCE */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \ (UINT32_C(0x2) << 12) /* * indicates that the IPv4 TTL or IPv6 hop limit check * have failed (e.g. TTL = 0). Valid for IPv4, and IPv6 */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL \ (UINT32_C(0x3) << 12) /* * Indicates that physical packet is shorter than that * claimed by the l3 header length. Valid for IPv4, * IPv6 packet or RoCE packets. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \ (UINT32_C(0x4) << 12) /* * Indicates that the physical packet is shorter than that * claimed by the UDP header length for a UDP packet that is * not fragmented. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \ (UINT32_C(0x5) << 12) /* * Indicates that TCP header length > IP payload. Valid for * TCP packets only. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \ (UINT32_C(0x6) << 12) /* Indicates that TCP header length < 5. Valid for TCP. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \ (UINT32_C(0x7) << 12) /* * Indicates that TCP option headers result in a TCP header * size that does not match data offset in TCP header. Valid * for TCP. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \ (UINT32_C(0x8) << 12) #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \ RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN /* * This field identifies the CFA action rule that was used for this * packet. */ uint16_t cfa_code; uint32_t reorder; /* * This value holds the reordering sequence number for the packet. * If the reordering sequence is not valid, then this value is zero. * The reordering domain for the packet is in the bottom 8 to 10b of * the rss_hash value. The bottom 20b of this value contain the * ordering domain value for the packet. */ #define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff) #define RX_PKT_CMPL_REORDER_SFT 0 } __attribute__((packed)); /* rx_tpa_start_cmpl (size:128b/16B) */ struct rx_tpa_start_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f) #define RX_TPA_START_CMPL_TYPE_SFT 0 /* * RX L2 TPA Start Completion: * Completion at the beginning of a TPA operation. * Length = 32B */ #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13) #define RX_TPA_START_CMPL_TYPE_LAST \ RX_TPA_START_CMPL_TYPE_RX_TPA_START #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define RX_TPA_START_CMPL_FLAGS_SFT 6 /* This bit will always be '0' for TPA start completions. */ #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: * TPA Packet was placed using jumbo algorithm. This means * that the first buffer will be filled with data before * moving to aggregation buffers. Each aggregation buffer * will be filled before moving to the next aggregation * buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO \ (UINT32_C(0x1) << 7) /* * Header/Data Separation: * Packet was placed using Header/Data separation algorithm. * The separation location is indicated by the itype field. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS \ (UINT32_C(0x2) << 7) /* * GRO/Jumbo: * Packet will be placed using GRO/Jumbo where the first * packet is filled with data. Subsequent packets will be * placed such that any one packet does not span two * aggregation buffers unless it starts at the beginning of * an aggregation buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ (UINT32_C(0x5) << 7) /* * GRO/Header-Data Separation: * Packet will be placed using GRO/HDS where the header * is in the first packet. * Payload of each packet will be * placed such that any one packet does not span two * aggregation buffers unless it starts at the beginning of * an aggregation buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS \ (UINT32_C(0x6) << 7) #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \ RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS /* This bit is '1' if the RSS field in this completion is valid. */ #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) /* unused is 1 b */ #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800) /* * This value indicates what the inner packet determined for the * packet was. */ #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12 /* * TCP Packet: * Indicates that the packet was IP and TCP. */ #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP \ (UINT32_C(0x2) << 12) #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \ RX_TPA_START_CMPL_FLAGS_ITYPE_TCP /* * This value indicates the amount of packet data written to the * buffer the opaque field in this completion corresponds to. */ uint16_t len; /* * This is a copy of the opaque field from the RX BD this completion * corresponds to. */ uint32_t opaque; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ uint8_t v1; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define RX_TPA_START_CMPL_V1 UINT32_C(0x1) #define RX_TPA_START_CMPL_LAST RX_TPA_START_CMPL_V1 /* * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}. * * The value of tuple_extrac_op provides the information about * what fields the hash was computed on. * * 0: The RSS hash was computed over source IP address, * destination IP address, source port, and destination port of inner * IP and TCP or UDP headers. Note: For non-tunneled packets, * the packet headers are considered inner packet headers for the RSS * hash computation purpose. * * 1: The RSS hash was computed over source IP address and destination * IP address of inner IP header. Note: For non-tunneled packets, * the packet headers are considered inner packet headers for the RSS * hash computation purpose. * * 2: The RSS hash was computed over source IP address, * destination IP address, source port, and destination port of * IP and TCP or UDP headers of outer tunnel headers. * Note: For non-tunneled packets, this value is not applicable. * * 3: The RSS hash was computed over source IP address and * destination IP address of IP header of outer tunnel headers. * Note: For non-tunneled packets, this value is not applicable. * * Note that 4-tuples values listed above are applicable * for layer 4 protocols supported and enabled for RSS in the hardware, * HWRM firmware, and drivers. For example, if RSS hash is supported and * enabled for TCP traffic only, then the values of tuple_extract_op * corresponding to 4-tuples are only valid for TCP traffic. */ uint8_t rss_hash_type; /* * This is the aggregation ID that the completion is associated * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ uint16_t agg_id; /* unused2 is 9 b */ #define RX_TPA_START_CMPL_UNUSED2_MASK UINT32_C(0x1ff) #define RX_TPA_START_CMPL_UNUSED2_SFT 0 /* * This is the aggregation ID that the completion is associated * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00) #define RX_TPA_START_CMPL_AGG_ID_SFT 9 /* * This value is the RSS hash value calculated for the packet * based on the mode bits and key value in the VNIC. */ uint32_t rss_hash; } __attribute__((packed)); /* rx_tpa_start_cmpl_hi (size:128b/16B) */ struct rx_tpa_start_cmpl_hi { uint32_t flags2; /* * This indicates that the ip checksum was calculated for the * inner packet and that the sum passed for all segments * included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) /* * This indicates that the TCP, UDP or ICMP checksum was * calculated for the inner packet and that the sum passed * for all segments included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) /* * This indicates that the ip checksum was calculated for the * tunnel header and that the sum passed for all segments * included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) /* * This indicates that the UDP checksum was * calculated for the tunnel packet and that the sum passed for * all segments included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) /* This value indicates what format the metadata field is. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4 /* No metadata informtaion. Value is zero. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE \ (UINT32_C(0x0) << 4) /* * The metadata field contains the VLAN tag and TPID value. * - metadata[11:0] contains the vlan VID value. * - metadata[12] contains the vlan DE value. * - metadata[15:13] contains the vlan PRI value. * - metadata[31:16] contains the vlan TPID value. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN \ (UINT32_C(0x1) << 4) #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \ RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN /* * This field indicates the IP type for the inner-most IP header. * A value of '0' indicates IPv4. A value of '1' indicates IPv6. */ #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) /* * This is data from the CFA block as indicated by the meta_format * field. */ uint32_t metadata; /* When meta_format=1, this value is the VLAN VID. */ #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff) #define RX_TPA_START_CMPL_METADATA_VID_SFT 0 /* When meta_format=1, this value is the VLAN DE. */ #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000) /* When meta_format=1, this value is the VLAN PRI. */ #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13 /* When meta_format=1, this value is the VLAN TPID. */ #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16 uint16_t v2; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define RX_TPA_START_CMPL_V2 UINT32_C(0x1) /* * This field identifies the CFA action rule that was used for this * packet. */ uint16_t cfa_code; /* * This is the size in bytes of the inner most L4 header. * This can be subtracted from the payload_offset to determine * the start of the inner most L4 header. */ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; /* * This is the offset from the beginning of the packet in bytes for * the outer L3 header. If there is no outer L3 header, then this * value is zero. */ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0 /* * This is the offset from the beginning of the packet in bytes for * the inner most L2 header. */ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00) #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9 /* * This is the offset from the beginning of the packet in bytes for * the inner most L3 header. */ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000) #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18 /* * This is the size in bytes of the inner most L4 header. * This can be subtracted from the payload_offset to determine * the start of the inner most L4 header. */ #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000) #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27 } __attribute__((packed)); /* rx_tpa_end_cmpl (size:128b/16B) */ struct rx_tpa_end_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f) #define RX_TPA_END_CMPL_TYPE_SFT 0 /* * RX L2 TPA End Completion: * Completion at the end of a TPA operation. * Length = 32B */ #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15) #define RX_TPA_END_CMPL_TYPE_LAST \ RX_TPA_END_CMPL_TYPE_RX_TPA_END #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define RX_TPA_END_CMPL_FLAGS_SFT 6 /* * When this bit is '1', it indicates a packet that has an * error of some type. Type of error is indicated in * error_flags. */ #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: * TPA Packet was placed using jumbo algorithm. This means * that the first buffer will be filled with data before * moving to aggregation buffers. Each aggregation buffer * will be filled before moving to the next aggregation * buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO \ (UINT32_C(0x1) << 7) /* * Header/Data Separation: * Packet was placed using Header/Data separation algorithm. * The separation location is indicated by the itype field. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS \ (UINT32_C(0x2) << 7) /* * GRO/Jumbo: * Packet will be placed using GRO/Jumbo where the first * packet is filled with data. Subsequent packets will be * placed such that any one packet does not span two * aggregation buffers unless it starts at the beginning of * an aggregation buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ (UINT32_C(0x5) << 7) /* * GRO/Header-Data Separation: * Packet will be placed using GRO/HDS where the header * is in the first packet. * Payload of each packet will be * placed such that any one packet does not span two * aggregation buffers unless it starts at the beginning of * an aggregation buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \ (UINT32_C(0x6) << 7) #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \ RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS /* unused is 2 b */ #define RX_TPA_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00) #define RX_TPA_END_CMPL_FLAGS_UNUSED_SFT 10 /* * This value indicates what the inner packet determined for the * packet was. * - 2 TCP Packet * Indicates that the packet was IP and TCP. This indicates * that the ip_cs field is valid and that the tcp_udp_cs * field is valid and contains the TCP checksum. * This also indicates that the payload_offset field is valid. */ #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12 /* * This value is zero for TPA End completions. * There is no data in the buffer that corresponds to the opaque * value in this completion. */ uint16_t len; /* * This is a copy of the opaque field from the RX BD this completion * corresponds to. */ uint32_t opaque; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ uint8_t agg_bufs_v1; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define RX_TPA_END_CMPL_V1 UINT32_C(0x1) /* * This value is the number of aggregation buffers that follow this * entry in the completion ring that are a part of this aggregation * packet. * If the value is zero, then the packet is completely contained * in the buffer space provided in the aggregation start completion. */ #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e) #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1 /* This value is the number of segments in the TPA operation. */ uint8_t tpa_segs; /* * This value indicates the offset in bytes from the beginning of the packet * where the inner payload starts. This value is valid for TCP, UDP, * FCoE, and RoCE packets. * * A value of zero indicates an offset of 256 bytes. */ uint8_t payload_offset; uint8_t agg_id; /* unused2 is 1 b */ #define RX_TPA_END_CMPL_UNUSED2 UINT32_C(0x1) /* * This is the aggregation ID that the completion is associated * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe) #define RX_TPA_END_CMPL_AGG_ID_SFT 1 /* * For non-GRO packets, this value is the * timestamp delta between earliest and latest timestamp values for * TPA packet. If packets were not time stamped, then delta will be * zero. * * For GRO packets, this field is zero except for the following * sub-fields. * - tsdelta[31] * Timestamp present indication. When '0', no Timestamp * option is in the packet. When '1', then a Timestamp * option is present in the packet. */ uint32_t tsdelta; } __attribute__((packed)); /* rx_tpa_end_cmpl_hi (size:128b/16B) */ struct rx_tpa_end_cmpl_hi { /* * This value is the number of duplicate ACKs that have been * received as part of the TPA operation. */ uint32_t tpa_dup_acks; /* * This value is the number of duplicate ACKs that have been * received as part of the TPA operation. */ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0 /* * This value is the valid when TPA completion is active. It * indicates the length of the longest segment of the TPA operation * for LRO mode and the length of the first segment in GRO mode. * * This value may be used by GRO software to re-construct the original * packet stream from the TPA packet. This is the length of all * but the last segment for GRO. In LRO mode this value may be used * to indicate MSS size to the stack. */ uint16_t tpa_seg_len; /* unused4 is 16 b */ uint16_t unused3; uint16_t errors_v2; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define RX_TPA_END_CMPL_V2 UINT32_C(0x1) #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe) #define RX_TPA_END_CMPL_ERRORS_SFT 1 /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the * packet was already placed. The packet should be treated as * invalid. */ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* * This error occurs when there is a fatal HW problem in * the chip only. It indicates that there were not * BDs on chip but that there was adequate reservation. * provided by the TPA block. */ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ (UINT32_C(0x2) << 1) /* * This error occurs when TPA block was not configured to * reserve adequate BDs for TPA operations on this RX * ring. All data for the TPA operation was not placed. * * This error can also be generated when the number of * segments is not programmed correctly in TPA and the * 33 total aggregation buffers allowed for the TPA * operation has been exceeded. */ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ (UINT32_C(0x4) << 1) #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR /* unused5 is 16 b */ uint16_t unused_4; /* * This is the opaque value that was completed for the TPA start * completion that corresponds to this TPA end completion. */ uint32_t start_opaque; } __attribute__((packed)); /* rx_abuf_cmpl (size:128b/16B) */ struct rx_abuf_cmpl { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define RX_ABUF_CMPL_TYPE_MASK UINT32_C(0x3f) #define RX_ABUF_CMPL_TYPE_SFT 0 /* * RX Aggregation Buffer completion : * Completion of an L2 aggregation buffer in support of * TPA, HDS, or Jumbo packet completion. Length = 16B */ #define RX_ABUF_CMPL_TYPE_RX_AGG UINT32_C(0x12) #define RX_ABUF_CMPL_TYPE_LAST RX_ABUF_CMPL_TYPE_RX_AGG /* * This is the length of the data for the packet stored in this * aggregation buffer identified by the opaque value. This does not * include the length of any * data placed in other aggregation BDs or in the packet or buffer * BDs. This length does not include any space added due to * hdr_offset register during HDS placement mode. */ uint16_t len; /* * This is a copy of the opaque field from the RX BD this aggregation * buffer corresponds to. */ uint32_t opaque; uint32_t v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define RX_ABUF_CMPL_V UINT32_C(0x1) /* unused3 is 32 b */ uint32_t unused_2; } __attribute__((packed)); /* eject_cmpl (size:128b/16B) */ struct eject_cmpl { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define EJECT_CMPL_TYPE_MASK UINT32_C(0x3f) #define EJECT_CMPL_TYPE_SFT 0 /* * Statistics Ejection Completion: * Completion of statistics data ejection buffer. * Length = 16B */ #define EJECT_CMPL_TYPE_STAT_EJECT UINT32_C(0x1a) #define EJECT_CMPL_TYPE_LAST EJECT_CMPL_TYPE_STAT_EJECT /* * This is the length of the statistics data stored in this * buffer. */ uint16_t len; /* * This is a copy of the opaque field from the RX BD this ejection * buffer corresponds to. */ uint32_t opaque; uint32_t v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define EJECT_CMPL_V UINT32_C(0x1) /* unused3 is 32 b */ uint32_t unused_2; } __attribute__((packed)); /* hwrm_cmpl (size:128b/16B) */ struct hwrm_cmpl { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_CMPL_TYPE_MASK UINT32_C(0x3f) #define HWRM_CMPL_TYPE_SFT 0 /* * HWRM Command Completion: * Completion of an HWRM command. */ #define HWRM_CMPL_TYPE_HWRM_DONE UINT32_C(0x20) #define HWRM_CMPL_TYPE_LAST HWRM_CMPL_TYPE_HWRM_DONE /* This is the sequence_id of the HWRM command that has completed. */ uint16_t sequence_id; /* unused2 is 32 b */ uint32_t unused_1; uint32_t v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_CMPL_V UINT32_C(0x1) /* unused4 is 32 b */ uint32_t unused_3; } __attribute__((packed)); /* hwrm_fwd_req_cmpl (size:128b/16B) */ struct hwrm_fwd_req_cmpl { /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ uint16_t req_len_type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_FWD_REQ_CMPL_TYPE_MASK UINT32_C(0x3f) #define HWRM_FWD_REQ_CMPL_TYPE_SFT 0 /* Forwarded HWRM Request */ #define HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ UINT32_C(0x22) #define HWRM_FWD_REQ_CMPL_TYPE_LAST \ HWRM_FWD_REQ_CMPL_TYPE_HWRM_FWD_REQ /* Length of forwarded request in bytes. */ #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0) #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6 /* * Source ID of this request. * Typically used in forwarding requests and responses. * 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors * 0xFFFF - HWRM */ uint16_t source_id; /* unused1 is 32 b */ uint32_t unused0; /* Address of forwarded request. */ uint32_t req_buf_addr_v[2]; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_FWD_REQ_CMPL_V UINT32_C(0x1) /* Address of forwarded request. */ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe) #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1 } __attribute__((packed)); /* hwrm_fwd_resp_cmpl (size:128b/16B) */ struct hwrm_fwd_resp_cmpl { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_FWD_RESP_CMPL_TYPE_MASK UINT32_C(0x3f) #define HWRM_FWD_RESP_CMPL_TYPE_SFT 0 /* Forwarded HWRM Response */ #define HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP UINT32_C(0x24) #define HWRM_FWD_RESP_CMPL_TYPE_LAST \ HWRM_FWD_RESP_CMPL_TYPE_HWRM_FWD_RESP /* * Source ID of this response. * Typically used in forwarding requests and responses. * 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors * 0xFFFF - HWRM */ uint16_t source_id; /* Length of forwarded response in bytes. */ uint16_t resp_len; /* unused2 is 16 b */ uint16_t unused_1; /* Address of forwarded request. */ uint32_t resp_buf_addr_v[2]; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_FWD_RESP_CMPL_V UINT32_C(0x1) /* Address of forwarded request. */ #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_MASK UINT32_C(0xfffffffe) #define HWRM_FWD_RESP_CMPL_RESP_BUF_ADDR_SFT 1 } __attribute__((packed)); /* hwrm_async_event_cmpl (size:128b/16B) */ struct hwrm_async_event_cmpl { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Link status changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE \ UINT32_C(0x0) /* Link MTU changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE \ UINT32_C(0x1) /* Link speed changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE \ UINT32_C(0x2) /* DCB Configuration changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE \ UINT32_C(0x3) /* Port connection not allowed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED \ UINT32_C(0x4) /* Link speed configuration was not allowed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ UINT32_C(0x5) /* Link speed configuration change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE \ UINT32_C(0x6) /* Port PHY configuration change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE \ UINT32_C(0x7) /* Function driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \ UINT32_C(0x10) /* Function driver loaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD \ UINT32_C(0x11) /* Function FLR related processing has completed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT \ UINT32_C(0x12) /* PF driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD \ UINT32_C(0x20) /* PF driver loaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD \ UINT32_C(0x21) /* VF Function Level Reset (FLR) */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR \ UINT32_C(0x30) /* VF MAC Address Change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE \ UINT32_C(0x31) /* PF-VF communication channel status change. */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ UINT32_C(0x32) /* VF Configuration Change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE \ UINT32_C(0x33) /* LLFC/PFC Configuration Change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LLFC_PFC_CHANGE \ UINT32_C(0x34) /* Default VNIC Configuration Change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DEFAULT_VNIC_CHANGE \ UINT32_C(0x35) /* HWRM Error */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR \ UINT32_C(0xff) #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; } __attribute__((packed)); /* hwrm_async_event_cmpl_link_status_change (size:128b/16B) */ struct hwrm_async_event_cmpl_link_status_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Link status changed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE \ UINT32_C(0x0) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_ID_LINK_STATUS_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* Indicates link status change */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE \ UINT32_C(0x1) /* * If this bit set to 0, then it indicates that the link * was up and it went down. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_DOWN \ UINT32_C(0x0) /* * If this bit is set to 1, then it indicates that the link * was down and it went up. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP \ UINT32_C(0x1) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_LINK_CHANGE_UP /* Indicates the physical port this link status change occur */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_MASK \ UINT32_C(0xe) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_SFT \ 1 /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0xffff0) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PORT_ID_SFT \ 4 /* Indicates the physical function this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_MASK \ UINT32_C(0xff00000) #define HWRM_ASYNC_EVENT_CMPL_LINK_STATUS_CHANGE_EVENT_DATA1_PF_ID_SFT \ 20 } __attribute__((packed)); /* hwrm_async_event_cmpl_link_mtu_change (size:128b/16B) */ struct hwrm_async_event_cmpl_link_mtu_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Link MTU changed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE \ UINT32_C(0x1) #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_ID_LINK_MTU_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* The new MTU of the link in bytes. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_LINK_MTU_CHANGE_EVENT_DATA1_NEW_MTU_SFT 0 } __attribute__((packed)); /* hwrm_async_event_cmpl_link_speed_change (size:128b/16B) */ struct hwrm_async_event_cmpl_link_speed_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Link speed changed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE \ UINT32_C(0x2) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_ID_LINK_SPEED_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* * When this bit is '1', the link was forced to the * force_link_speed value. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_FORCE \ UINT32_C(0x1) /* The new link speed in 100 Mbps units. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_MASK \ UINT32_C(0xfffe) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_SFT \ 1 /* 100Mb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100MB \ (UINT32_C(0x1) << 1) /* 1Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_1GB \ (UINT32_C(0xa) << 1) /* 2Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2GB \ (UINT32_C(0x14) << 1) /* 25Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_2_5GB \ (UINT32_C(0x19) << 1) /* 10Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_10GB \ (UINT32_C(0x64) << 1) /* 20Mb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_20GB \ (UINT32_C(0xc8) << 1) /* 25Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_25GB \ (UINT32_C(0xfa) << 1) /* 40Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_40GB \ (UINT32_C(0x190) << 1) /* 50Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_50GB \ (UINT32_C(0x1f4) << 1) /* 100Gb link speed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB \ (UINT32_C(0x3e8) << 1) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_NEW_LINK_SPEED_100MBPS_100GB /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0xffff0000) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CHANGE_EVENT_DATA1_PORT_ID_SFT \ 16 } __attribute__((packed)); /* hwrm_async_event_cmpl_dcb_config_change (size:128b/16B) */ struct hwrm_async_event_cmpl_dcb_config_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* DCB Configuration changed */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE \ UINT32_C(0x3) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_ID_DCB_CONFIG_CHANGE /* Event specific data */ uint32_t event_data2; /* ETS configuration change */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_ETS \ UINT32_C(0x1) /* PFC configuration change */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_PFC \ UINT32_C(0x2) /* APP configuration change */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA2_APP \ UINT32_C(0x4) uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ 0 /* Priority recommended for RoCE traffic */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_MASK \ UINT32_C(0xff0000) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_SFT \ 16 /* none is 255 */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE \ (UINT32_C(0xff) << 16) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_LAST \ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_ROCE_PRIORITY_NONE /* Priority recommended for L2 traffic */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_MASK \ UINT32_C(0xff000000) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_SFT \ 24 /* none is 255 */ #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE \ (UINT32_C(0xff) << 24) #define HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_LAST \ HWRM_ASYNC_EVENT_CMPL_DCB_CONFIG_CHANGE_EVENT_DATA1_RECOMMEND_L2_PRIORITY_NONE } __attribute__((packed)); /* hwrm_async_event_cmpl_port_conn_not_allowed (size:128b/16B) */ struct hwrm_async_event_cmpl_port_conn_not_allowed { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_SFT \ 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Port connection not allowed */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED \ UINT32_C(0x4) #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_ID_PORT_CONN_NOT_ALLOWED /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ 0 /* * This value indicates the current port level enforcement policy * for the optics module when there is an optical module mismatch * and port is not connected. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_MASK \ UINT32_C(0xff0000) #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_SFT \ 16 /* No enforcement */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_NONE \ (UINT32_C(0x0) << 16) /* Disable Transmit side Laser. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_DISABLETX \ (UINT32_C(0x1) << 16) /* Raise a warning message. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_WARNINGMSG \ (UINT32_C(0x2) << 16) /* Power down the module. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN \ (UINT32_C(0x3) << 16) #define HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_LAST \ HWRM_ASYNC_EVENT_CMPL_PORT_CONN_NOT_ALLOWED_EVENT_DATA1_ENFORCEMENT_POLICY_PWRDOWN } __attribute__((packed)); /* hwrm_async_event_cmpl_link_speed_cfg_not_allowed (size:128b/16B) */ struct hwrm_async_event_cmpl_link_speed_cfg_not_allowed { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_SFT \ 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Link speed configuration was not allowed */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ UINT32_C(0x5) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_NOT_ALLOWED_EVENT_DATA1_PORT_ID_SFT \ 0 } __attribute__((packed)); /* hwrm_async_event_cmpl_link_speed_cfg_change (size:128b/16B) */ struct hwrm_async_event_cmpl_link_speed_cfg_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_SFT \ 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Link speed configuration change */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE \ UINT32_C(0x6) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_ID_LINK_SPEED_CFG_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ 0 /* * If set to 1, it indicates that the supported link speeds * configuration on the port has changed. * If set to 0, then there is no change in supported link speeds * configuration. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_SUPPORTED_LINK_SPEEDS_CHANGE \ UINT32_C(0x10000) /* * If set to 1, it indicates that the link speed configuration * on the port has become illegal or invalid. * If set to 0, then the link speed configuration on the port is * legal or valid. */ #define HWRM_ASYNC_EVENT_CMPL_LINK_SPEED_CFG_CHANGE_EVENT_DATA1_ILLEGAL_LINK_SPEED_CFG \ UINT32_C(0x20000) } __attribute__((packed)); /* hwrm_async_event_cmpl_port_phy_cfg_change (size:128b/16B) */ struct hwrm_async_event_cmpl_port_phy_cfg_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_SFT \ 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Port PHY configuration change */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE \ UINT32_C(0x7) #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_ID_PORT_PHY_CFG_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PORT_ID_SFT \ 0 /* * If set to 1, it indicates that the FEC * configuration on the port has changed. * If set to 0, then there is no change in FEC configuration. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_FEC_CFG_CHANGE \ UINT32_C(0x10000) /* * If set to 1, it indicates that the EEE configuration * on the port has changed. * If set to 0, then there is no change in EEE configuration * on the port. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_EEE_CFG_CHANGE \ UINT32_C(0x20000) /* * If set to 1, it indicates that the pause configuration * on the PHY has changed. * If set to 0, then there is no change in the pause * configuration on the PHY. */ #define HWRM_ASYNC_EVENT_CMPL_PORT_PHY_CFG_CHANGE_EVENT_DATA1_PAUSE_CFG_CHANGE \ UINT32_C(0x40000) } __attribute__((packed)); /* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */ struct hwrm_async_event_cmpl_func_drvr_unload { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Function driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD \ UINT32_C(0x10) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_ID_FUNC_DRVR_UNLOAD /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* Function ID */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT \ 0 } __attribute__((packed)); /* hwrm_async_event_cmpl_func_drvr_load (size:128b/16B) */ struct hwrm_async_event_cmpl_func_drvr_load { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Function driver loaded */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD \ UINT32_C(0x11) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_ID_FUNC_DRVR_LOAD /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* Function ID */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_FUNC_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 } __attribute__((packed)); /* hwrm_async_event_cmpl_func_flr_proc_cmplt (size:128b/16B) */ struct hwrm_async_event_cmpl_func_flr_proc_cmplt { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_SFT \ 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* Function FLR related processing has completed */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT \ UINT32_C(0x12) #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_ID_FUNC_FLR_PROC_CMPLT /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* Function ID */ #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_FUNC_FLR_PROC_CMPLT_EVENT_DATA1_FUNC_ID_SFT \ 0 } __attribute__((packed)); /* hwrm_async_event_cmpl_pf_drvr_unload (size:128b/16B) */ struct hwrm_async_event_cmpl_pf_drvr_unload { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* PF driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD \ UINT32_C(0x20) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_ID_PF_DRVR_UNLOAD /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* PF ID */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_FUNC_ID_SFT 0 /* Indicates the physical port this pf belongs to */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_MASK \ UINT32_C(0x70000) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_UNLOAD_EVENT_DATA1_PORT_SFT 16 } __attribute__((packed)); /* hwrm_async_event_cmpl_pf_drvr_load (size:128b/16B) */ struct hwrm_async_event_cmpl_pf_drvr_load { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* PF driver loaded */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD \ UINT32_C(0x21) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_ID_PF_DRVR_LOAD /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* PF ID */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_FUNC_ID_SFT 0 /* Indicates the physical port this pf belongs to */ #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_MASK \ UINT32_C(0x70000) #define HWRM_ASYNC_EVENT_CMPL_PF_DRVR_LOAD_EVENT_DATA1_PORT_SFT 16 } __attribute__((packed)); /* hwrm_async_event_cmpl_vf_flr (size:128b/16B) */ struct hwrm_async_event_cmpl_vf_flr { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_VF_FLR_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* VF Function Level Reset (FLR) */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR UINT32_C(0x30) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_ID_VF_FLR /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* VF ID */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_VF_ID_SFT 0 /* Indicates the physical function this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_MASK \ UINT32_C(0xff0000) #define HWRM_ASYNC_EVENT_CMPL_VF_FLR_EVENT_DATA1_PF_ID_SFT 16 } __attribute__((packed)); /* hwrm_async_event_cmpl_vf_mac_addr_change (size:128b/16B) */ struct hwrm_async_event_cmpl_vf_mac_addr_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* VF MAC Address Change */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE \ UINT32_C(0x31) #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_ID_VF_MAC_ADDR_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* VF ID */ #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_MASK \ UINT32_C(0xffff) #define HWRM_ASYNC_EVENT_CMPL_VF_MAC_ADDR_CHANGE_EVENT_DATA1_VF_ID_SFT \ 0 } __attribute__((packed)); /* hwrm_async_event_cmpl_pf_vf_comm_status_change (size:128b/16B) */ struct hwrm_async_event_cmpl_pf_vf_comm_status_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_SFT \ 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* PF-VF communication channel status change. */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ UINT32_C(0x32) #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_ID_PF_VF_COMM_STATUS_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* * If this bit is set to 1, then it indicates that the PF-VF * communication was lost and it is established. * If this bit set to 0, then it indicates that the PF-VF * communication was established and it is lost. */ #define HWRM_ASYNC_EVENT_CMPL_PF_VF_COMM_STATUS_CHANGE_EVENT_DATA1_COMM_ESTABLISHED \ UINT32_C(0x1) } __attribute__((packed)); /* hwrm_async_event_cmpl_vf_cfg_change (size:128b/16B) */ struct hwrm_async_event_cmpl_vf_cfg_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* VF Configuration Change */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE \ UINT32_C(0x33) #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_ID_VF_CFG_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* * Each flag provided in this field indicates a specific VF * configuration change. At least one of these flags shall be set to 1 * when an asynchronous event completion of this type is provided * by the HWRM. */ uint32_t event_data1; /* * If this bit is set to 1, then the value of MTU * was changed on this VF. * If set to 0, then this bit should be ignored. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MTU_CHANGE \ UINT32_C(0x1) /* * If this bit is set to 1, then the value of MRU * was changed on this VF. * If set to 0, then this bit should be ignored. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_MRU_CHANGE \ UINT32_C(0x2) /* * If this bit is set to 1, then the value of default MAC * address was changed on this VF. * If set to 0, then this bit should be ignored. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_MAC_ADDR_CHANGE \ UINT32_C(0x4) /* * If this bit is set to 1, then the value of default VLAN * was changed on this VF. * If set to 0, then this bit should be ignored. */ #define HWRM_ASYNC_EVENT_CMPL_VF_CFG_CHANGE_EVENT_DATA1_DFLT_VLAN_CHANGE \ UINT32_C(0x8) } __attribute__((packed)); /* hwrm_async_event_cmpl_llfc_pfc_change (size:128b/16B) */ struct hwrm_async_event_cmpl_llfc_pfc_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_TYPE_HWRM_ASYNC_EVENT /* unused1 is 10 b */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_MASK \ UINT32_C(0xffc0) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_UNUSED1_SFT 6 /* Identifiers of events. */ uint16_t event_id; /* LLFC/PFC Configuration Change */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE \ UINT32_C(0x34) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_ID_LLFC_PFC_CHANGE /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* Indicates llfc pfc status change */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_MASK \ UINT32_C(0x3) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_SFT \ 0 /* * If this field set to 1, then it indicates that llfc is * enabled. */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LLFC \ UINT32_C(0x1) /* * If this field is set to 2, then it indicates that pfc * is enabled. */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC \ UINT32_C(0x2) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_LAST \ HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_LLFC_PFC_PFC /* Indicates the physical port this llfc pfc change occur */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_MASK \ UINT32_C(0x1c) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_SFT \ 2 /* PORT ID */ #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_MASK \ UINT32_C(0x1fffe0) #define HWRM_ASYNC_EVENT_CMPL_LLFC_PFC_CHANGE_EVENT_DATA1_PORT_ID_SFT \ 5 } __attribute__((packed)); /* hwrm_async_event_cmpl_default_vnic_change (size:128b/16B) */ struct hwrm_async_event_cmpl_default_vnic_change { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_SFT \ 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_TYPE_HWRM_ASYNC_EVENT /* unused1 is 10 b */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_MASK \ UINT32_C(0xffc0) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_UNUSED1_SFT \ 6 /* Identifiers of events. */ uint16_t event_id; /* Notification of a default vnic allocaiton or free */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION \ UINT32_C(0x35) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_ID_ALLOC_FREE_NOTIFICATION /* Event specific data */ uint32_t event_data2; uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_V \ UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_MASK \ UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* Indicates default vnic configuration change */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_MASK \ UINT32_C(0x3) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_SFT \ 0 /* * If this field is set to 1, then it indicates that * a default VNIC has been allocate. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_ALLOC \ UINT32_C(0x1) /* * If this field is set to 2, then it indicates that * a default VNIC has been freed. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE \ UINT32_C(0x2) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_LAST \ HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_DEF_VNIC_STATE_DEF_VNIC_FREE /* Indicates the physical function this event occured on. */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_MASK \ UINT32_C(0x3fc) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_PF_ID_SFT \ 2 /* Indicates the virtual function this event occured on */ #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_MASK \ UINT32_C(0x3fffc00) #define HWRM_ASYNC_EVENT_CMPL_DEFAULT_VNIC_CHANGE_EVENT_DATA1_VF_ID_SFT \ 10 } __attribute__((packed)); /* hwrm_async_event_cmpl_hwrm_error (size:128b/16B) */ struct hwrm_async_event_cmpl_hwrm_error { uint16_t type; /* * This field indicates the exact type of the completion. * By convention, the LSB identifies the length of the * record in 16B units. Even values indicate 16B * records. Odd values indicate 32B * records. */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_MASK \ UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT \ UINT32_C(0x2e) #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_LAST \ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_TYPE_HWRM_ASYNC_EVENT /* Identifiers of events. */ uint16_t event_id; /* HWRM Error */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR \ UINT32_C(0xff) #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_LAST \ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_ID_HWRM_ERROR /* Event specific data */ uint32_t event_data2; /* Severity of HWRM Error */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_MASK \ UINT32_C(0xff) #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_SFT 0 /* Warning */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_WARNING \ UINT32_C(0x0) /* Non-fatal Error */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_NONFATAL \ UINT32_C(0x1) /* Fatal Error */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL \ UINT32_C(0x2) #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_LAST \ HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA2_SEVERITY_FATAL uint8_t opaque_v; /* * This value is written by the NIC such that it will be different * for each pass through the completion queue. The even passes * will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_OPAQUE_SFT 1 /* 8-lsb timestamp from POR (100-msec resolution) */ uint8_t timestamp_lo; /* 16-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* Event specific data */ uint32_t event_data1; /* Time stamp for error event */ #define HWRM_ASYNC_EVENT_CMPL_HWRM_ERROR_EVENT_DATA1_TIMESTAMP \ UINT32_C(0x1) } __attribute__((packed)); /******************* * hwrm_func_reset * *******************/ /* hwrm_func_reset_input (size:192b/24B) */ struct hwrm_func_reset_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the vf_id_valid field to be * configured. */ #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) /* * The ID of the VF that this PF is trying to reset. * Only the parent PF shall be allowed to reset a child VF. * * A parent PF driver shall use this field only when a specific child VF * is requested to be reset. */ uint16_t vf_id; /* This value indicates the level of a function reset. */ uint8_t func_reset_level; /* * Reset the caller function and its children VFs (if any). If no * children functions exist, then reset the caller function only. */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL \ UINT32_C(0x0) /* Reset the caller function only */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME \ UINT32_C(0x1) /* * Reset all children VFs of the caller function driver if the * caller is a PF driver. * It is an error to specify this level by a VF driver. * It is an error to specify this level by a PF driver with * no children VFs. */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ UINT32_C(0x2) /* * Reset a specific VF of the caller function driver if the caller * is the parent PF driver. * It is an error to specify this level by a VF driver. * It is an error to specify this level by a PF driver that is not * the parent of the VF that is being requested to reset. */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF \ UINT32_C(0x3) #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_LAST \ HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF uint8_t unused_0; } __attribute__((packed)); /* hwrm_func_reset_output (size:128b/16B) */ struct hwrm_func_reset_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************** * hwrm_func_getfid * ********************/ /* hwrm_func_getfid_input (size:192b/24B) */ struct hwrm_func_getfid_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the pci_id field to be * configured. */ #define HWRM_FUNC_GETFID_INPUT_ENABLES_PCI_ID UINT32_C(0x1) /* * This value is the PCI ID of the queried function. * If ARI is enabled, then it is * Bus Number (8b):Function Number(8b). Otherwise, it is * Bus Number (8b):Device Number (5b):Function Number(3b). */ uint16_t pci_id; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_func_getfid_output (size:128b/16B) */ struct hwrm_func_getfid_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * FID value. This value is used to identify operations on the PCI * bus as belonging to a particular PCI function. */ uint16_t fid; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_func_vf_alloc * **********************/ /* hwrm_func_vf_alloc_input (size:192b/24B) */ struct hwrm_func_vf_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the first_vf_id field to be * configured. */ #define HWRM_FUNC_VF_ALLOC_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) /* * This value is used to identify a Virtual Function (VF). * The scope of VF ID is local within a PF. */ uint16_t first_vf_id; /* The number of virtual functions requested. */ uint16_t num_vfs; } __attribute__((packed)); /* hwrm_func_vf_alloc_output (size:128b/16B) */ struct hwrm_func_vf_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* The ID of the first VF allocated. */ uint16_t first_vf_id; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_func_vf_free * *********************/ /* hwrm_func_vf_free_input (size:192b/24B) */ struct hwrm_func_vf_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the first_vf_id field to be * configured. */ #define HWRM_FUNC_VF_FREE_INPUT_ENABLES_FIRST_VF_ID UINT32_C(0x1) /* * This value is used to identify a Virtual Function (VF). * The scope of VF ID is local within a PF. */ uint16_t first_vf_id; /* * The number of virtual functions requested. * 0xFFFF - Cleanup all children of this PF. */ uint16_t num_vfs; } __attribute__((packed)); /* hwrm_func_vf_free_output (size:128b/16B) */ struct hwrm_func_vf_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************** * hwrm_func_vf_cfg * ********************/ /* hwrm_func_vf_cfg_input (size:448b/56B) */ struct hwrm_func_vf_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the mtu field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU \ UINT32_C(0x1) /* * This bit must be '1' for the guest_vlan field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN \ UINT32_C(0x2) /* * This bit must be '1' for the async_event_cr field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \ UINT32_C(0x4) /* * This bit must be '1' for the dflt_mac_addr field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \ UINT32_C(0x8) /* * This bit must be '1' for the num_rsscos_ctxs field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \ UINT32_C(0x10) /* * This bit must be '1' for the num_cmpl_rings field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \ UINT32_C(0x20) /* * This bit must be '1' for the num_tx_rings field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_TX_RINGS \ UINT32_C(0x40) /* * This bit must be '1' for the num_rx_rings field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_RX_RINGS \ UINT32_C(0x80) /* * This bit must be '1' for the num_l2_ctxs field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_L2_CTXS \ UINT32_C(0x100) /* * This bit must be '1' for the num_vnics field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_VNICS \ UINT32_C(0x200) /* * This bit must be '1' for the num_stat_ctxs field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_STAT_CTXS \ UINT32_C(0x400) /* * This bit must be '1' for the num_hw_ring_grps field to be * configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \ UINT32_C(0x800) /* * The maximum transmission unit requested on the function. * The HWRM should make sure that the mtu of * the function does not exceed the mtu of the physical * port that this function is associated with. * * In addition to requesting mtu per function, it is * possible to configure mtu per transmit ring. * By default, the mtu of each transmit ring associated * with a function is equal to the mtu of the function. * The HWRM should make sure that the mtu of each transmit * ring that is assigned to a function has a valid mtu. */ uint16_t mtu; /* * The guest VLAN for the function being configured. * This field's format is same as 802.1Q Tag's * Tag Control Information (TCI) format that includes both * Priority Code Point (PCP) and VLAN Identifier (VID). */ uint16_t guest_vlan; /* * ID of the target completion ring for receiving asynchronous * event completions. If this field is not valid, then the * HWRM shall use the default completion ring of the function * that is being configured as the target completion ring for * providing any asynchronous event completions for that * function. * If this field is valid, then the HWRM shall use the * completion ring identified by this ID as the target * completion ring for providing any asynchronous event * completions for the function that is being configured. */ uint16_t async_event_cr; /* * This value is the current MAC address requested by the VF * driver to be configured on this VF. A value of * 00-00-00-00-00-00 indicates no MAC address configuration * is requested by the VF driver. * The parent PF driver may reject or overwrite this * MAC address. */ uint8_t dflt_mac_addr[6]; uint32_t flags; /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of TX rings) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_TX_ASSETS_TEST \ UINT32_C(0x1) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of RX rings) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RX_ASSETS_TEST \ UINT32_C(0x2) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of CMPL rings) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \ UINT32_C(0x4) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of RSS ctx) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \ UINT32_C(0x8) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of ring groups) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \ UINT32_C(0x10) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of stat ctx) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \ UINT32_C(0x20) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of VNICs) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \ UINT32_C(0x40) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of L2 ctx) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_VF_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \ UINT32_C(0x80) /* The number of RSS/COS contexts requested for the VF. */ uint16_t num_rsscos_ctxs; /* The number of completion rings requested for the VF. */ uint16_t num_cmpl_rings; /* The number of transmit rings requested for the VF. */ uint16_t num_tx_rings; /* The number of receive rings requested for the VF. */ uint16_t num_rx_rings; /* The number of L2 contexts requested for the VF. */ uint16_t num_l2_ctxs; /* The number of vnics requested for the VF. */ uint16_t num_vnics; /* The number of statistic contexts requested for the VF. */ uint16_t num_stat_ctxs; /* The number of HW ring groups requested for the VF. */ uint16_t num_hw_ring_grps; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_func_vf_cfg_output (size:128b/16B) */ struct hwrm_func_vf_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************* * hwrm_func_qcaps * *******************/ /* hwrm_func_qcaps_input (size:192b/24B) */ struct hwrm_func_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being queried. * 0xFF... (All Fs) if the query is for the requesting * function. */ uint16_t fid; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_func_qcaps_output (size:640b/80B) */ struct hwrm_func_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * FID value. This value is used to identify operations on the PCI * bus as belonging to a particular PCI function. */ uint16_t fid; /* * Port ID of port that this function is associated with. * Valid only for the PF. * 0xFF... (All Fs) if this function is not associated with * any port. * 0xFF... (All Fs) if this function is called from a VF. */ uint16_t port_id; uint32_t flags; /* If 1, then Push mode is supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED \ UINT32_C(0x1) /* * If 1, then the global MSI-X auto-masking is enabled for the * device. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \ UINT32_C(0x2) /* * If 1, then the Precision Time Protocol (PTP) processing * is supported on this function. * The HWRM should enable PTP on only a single Physical * Function (PF) per port. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED \ UINT32_C(0x4) /* * If 1, then RDMA over Converged Ethernet (RoCE) v1 * is supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED \ UINT32_C(0x8) /* * If 1, then RDMA over Converged Ethernet (RoCE) v2 * is supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED \ UINT32_C(0x10) /* * If 1, then control and configuration of WoL magic packet * are supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \ UINT32_C(0x20) /* * If 1, then control and configuration of bitmap pattern * packet are supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED \ UINT32_C(0x40) /* * If set to 1, then the control and configuration of rate limit * of an allocated TX ring on the queried function is supported. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED \ UINT32_C(0x80) /* * If 1, then control and configuration of minimum and * maximum bandwidths are supported on the queried function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED \ UINT32_C(0x100) /* * If the query is for a VF, then this flag shall be ignored. * If this query is for a PF and this flag is set to 1, * then the PF has the capability to set the rate limits * on the TX rings of its children VFs. * If this query is for a PF and this flag is set to 0, then * the PF does not have the capability to set the rate limits * on the TX rings of its children VFs. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \ UINT32_C(0x200) /* * If the query is for a VF, then this flag shall be ignored. * If this query is for a PF and this flag is set to 1, * then the PF has the capability to set the minimum and/or * maximum bandwidths for its children VFs. * If this query is for a PF and this flag is set to 0, then * the PF does not have the capability to set the minimum or * maximum bandwidths for its children VFs. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED \ UINT32_C(0x400) /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. * If set to 1, then standard TX ring mode is supported * on the queried function. * If set to 0, then standard TX ring mode is not available * on the queried function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \ UINT32_C(0x800) /* * If the query is for a VF, then this flag shall be ignored, * If this query is for a PF and this flag is set to 1, * then the PF has the capability to detect GENEVE tunnel * flags. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GENEVE_TUN_FLAGS_SUPPORTED \ UINT32_C(0x1000) /* * If the query is for a VF, then this flag shall be ignored, * If this query is for a PF and this flag is set to 1, * then the PF has the capability to detect NVGRE tunnel * flags. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_NVGRE_TUN_FLAGS_SUPPORTED \ UINT32_C(0x2000) /* * If the query is for a VF, then this flag shall be ignored, * If this query is for a PF and this flag is set to 1, * then the PF has the capability to detect GRE tunnel * flags. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GRE_TUN_FLAGS_SUPPORTED \ UINT32_C(0x4000) /* * If the query is for a VF, then this flag shall be ignored, * If this query is for a PF and this flag is set to 1, * then the PF has the capability to detect MPLS tunnel * flags. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_MPLS_TUN_FLAGS_SUPPORTED \ UINT32_C(0x8000) /* * If the query is for a VF, then this flag shall be ignored, * If this query is for a PF and this flag is set to 1, * then the PF has the capability to support pcie stats. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PCIE_STATS_SUPPORTED \ UINT32_C(0x10000) /* * If the query is for a VF, then this flag shall be ignored, * If this query is for a PF and this flag is set to 1, * then the PF has the capability to adopt the VF's belonging * to another PF. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADOPTED_PF_SUPPORTED \ UINT32_C(0x20000) /* * If the query is for a VF, then this flag shall be ignored, * If this query is for a PF and this flag is set to 1, * then the PF has the capability to administer another PF. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ADMIN_PF_SUPPORTED \ UINT32_C(0x40000) /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no * MAC address is currently configured. */ uint8_t mac_address[6]; /* * The maximum number of RSS/COS contexts that can be * allocated to the function. */ uint16_t max_rsscos_ctx; /* * The maximum number of completion rings that can be * allocated to the function. */ uint16_t max_cmpl_rings; /* * The maximum number of transmit rings that can be * allocated to the function. */ uint16_t max_tx_rings; /* * The maximum number of receive rings that can be * allocated to the function. */ uint16_t max_rx_rings; /* * The maximum number of L2 contexts that can be * allocated to the function. */ uint16_t max_l2_ctxs; /* * The maximum number of VNICs that can be * allocated to the function. */ uint16_t max_vnics; /* * The identifier for the first VF enabled on a PF. This * is valid only on the PF with SR-IOV enabled. * 0xFF... (All Fs) if this command is called on a PF with * SR-IOV disabled or on a VF. */ uint16_t first_vf_id; /* * The maximum number of VFs that can be * allocated to the function. This is valid only on the * PF with SR-IOV enabled. 0xFF... (All Fs) if this * command is called on a PF with SR-IOV disabled or * on a VF. */ uint16_t max_vfs; /* * The maximum number of statistic contexts that can be * allocated to the function. */ uint16_t max_stat_ctx; /* * The maximum number of Encapsulation records that can be * offloaded by this function. */ uint32_t max_encap_records; /* * The maximum number of decapsulation records that can * be offloaded by this function. */ uint32_t max_decap_records; /* * The maximum number of Exact Match (EM) flows that can be * offloaded by this function on the TX side. */ uint32_t max_tx_em_flows; /* * The maximum number of Wildcard Match (WM) flows that can * be offloaded by this function on the TX side. */ uint32_t max_tx_wm_flows; /* * The maximum number of Exact Match (EM) flows that can be * offloaded by this function on the RX side. */ uint32_t max_rx_em_flows; /* * The maximum number of Wildcard Match (WM) flows that can * be offloaded by this function on the RX side. */ uint32_t max_rx_wm_flows; /* * The maximum number of multicast filters that can * be supported by this function on the RX side. */ uint32_t max_mcast_filters; /* * The maximum value of flow_id that can be supported * in completion records. */ uint32_t max_flow_id; /* * The maximum number of HW ring groups that can be * supported on this function. */ uint32_t max_hw_ring_grps; /* * The maximum number of strict priority transmit rings * that can be allocated to the function. * This number indicates the maximum number of TX rings * that can be assigned strict priorities out of the * maximum number of TX rings that can be allocated * (max_tx_rings) to the function. */ uint16_t max_sp_tx_rings; uint8_t unused_0; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************** * hwrm_func_qcfg * ******************/ /* hwrm_func_qcfg_input (size:192b/24B) */ struct hwrm_func_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being queried. * 0xFF... (All Fs) if the query is for the requesting * function. */ uint16_t fid; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_func_qcfg_output (size:640b/80B) */ struct hwrm_func_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * FID value. This value is used to identify operations on the PCI * bus as belonging to a particular PCI function. */ uint16_t fid; /* * Port ID of port that this function is associated with. * 0xFF... (All Fs) if this function is not associated with * any port. */ uint16_t port_id; /* * This value is the current VLAN setting for this * function. The value of 0 for this field indicates * no priority tagging or VLAN is used. * This field's format is same as 802.1Q Tag's * Tag Control Information (TCI) format that includes both * Priority Code Point (PCP) and VLAN Identifier (VID). */ uint16_t vlan; uint16_t flags; /* * If 1, then magic packet based Out-Of-Box WoL is enabled on * the port associated with this function. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \ UINT32_C(0x1) /* * If 1, then bitmap pattern based Out-Of-Box WoL packet is enabled * on the port associated with this function. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED \ UINT32_C(0x2) /* * If set to 1, then FW based DCBX agent is enabled and running on * the port associated with this function. * If set to 0, then DCBX agent is not running in the firmware. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \ UINT32_C(0x4) /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. * If set to 1, then standard TX ring mode is enabled * on the queried function. * If set to 0, then the standard TX ring mode is disabled * on the queried function. In this extended TX ring resource * mode, the minimum and maximum bandwidth settings are not * supported to allow the allocation of TX rings to span multiple * scheduler nodes. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \ UINT32_C(0x8) /* * If set to 1 then FW based LLDP agent is enabled and running on * the port associated with this function. * If set to 0 then the LLDP agent is not running in the firmware. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED \ UINT32_C(0x10) /* * If set to 1, then multi-host mode is active for this function. * If set to 0, then multi-host mode is inactive for this function * or not applicable for this device. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST \ UINT32_C(0x20) /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no * MAC address is currently configured. */ uint8_t mac_address[6]; /* * This value is current PCI ID of this * function. If ARI is enabled, then it is * Bus Number (8b):Function Number(8b). Otherwise, it is * Bus Number (8b):Device Number (4b):Function Number(4b). * If multi-host mode is active, the 4 lsb will indicate * the PF index for this function. */ uint16_t pci_id; /* * The number of RSS/COS contexts currently * allocated to the function. */ uint16_t alloc_rsscos_ctx; /* * The number of completion rings currently allocated to * the function. This does not include the rings allocated * to any children functions if any. */ uint16_t alloc_cmpl_rings; /* * The number of transmit rings currently allocated to * the function. This does not include the rings allocated * to any children functions if any. */ uint16_t alloc_tx_rings; /* * The number of receive rings currently allocated to * the function. This does not include the rings allocated * to any children functions if any. */ uint16_t alloc_rx_rings; /* The allocated number of L2 contexts to the function. */ uint16_t alloc_l2_ctx; /* The allocated number of vnics to the function. */ uint16_t alloc_vnics; /* * The maximum transmission unit of the function. * For rings allocated on this function, this default * value is used if ring MTU is not specified. */ uint16_t mtu; /* * The maximum receive unit of the function. * For vnics allocated on this function, this default * value is used if vnic MRU is not specified. */ uint16_t mru; /* The statistics context assigned to a function. */ uint16_t stat_ctx_id; /* * The HWRM shall return Unknown value for this field * when this command is used to query VF's configuration. */ uint8_t port_partition_type; /* Single physical function */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0) /* Multiple physical functions */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1) /* Network Partitioning 1.0 */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2) /* Network Partitioning 1.5 */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3) /* Network Partitioning 2.0 */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4) /* Unknown */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \ UINT32_C(0xff) #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_LAST \ HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN /* * This field will indicate number of physical functions on this port_partition. * HWRM shall return unavail (i.e. value of 0) for this field * when this command is used to query VF's configuration or * from older firmware that doesn't support this field. */ uint8_t port_pf_cnt; /* number of PFs is not available */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0) #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_LAST \ HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL /* * The default VNIC ID assigned to a function that is * being queried. */ uint16_t dflt_vnic_id; uint16_t max_mtu_configured; /* * Minimum BW allocated for this function. * The HWRM will translate this value into byte counter and * time interval used for the scheduler inside the device. * A value of 0 indicates the minimum bandwidth is not * configured. */ uint32_t min_bw; /* The bandwidth value. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \ HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated for this function. * The HWRM will translate this value into byte counter and * time interval used for the scheduler inside the device. * A value of 0 indicates that the maximum bandwidth is not * configured. */ uint32_t max_bw; /* The bandwidth value. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \ HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID /* * This value indicates the Edge virtual bridge mode for the * domain that this function belongs to. */ uint8_t evb_mode; /* No Edge Virtual Bridging (EVB) */ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0) /* Virtual Ethernet Bridge (VEB) */ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1) /* Virtual Ethernet Port Aggregator (VEPA) */ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2) #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_LAST \ HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA uint8_t options; /* * This value indicates the PCIE device cache line size. * The cache line size allows the DMA writes to terminate and * start at the cache boundary. */ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_MASK \ UINT32_C(0x3) #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SFT 0 /* Cache Line Size 64 bytes */ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \ UINT32_C(0x0) /* Cache Line Size 128 bytes */ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \ UINT32_C(0x1) #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_LAST \ HWRM_FUNC_QCFG_OUTPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 /* Reserved for future. */ #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_MASK \ UINT32_C(0xfc) #define HWRM_FUNC_QCFG_OUTPUT_OPTIONS_RSVD_SFT 2 /* * The number of VFs that are allocated to the function. * This is valid only on the PF with SR-IOV enabled. * 0xFF... (All Fs) if this command is called on a PF with * SR-IOV disabled or on a VF. */ uint16_t alloc_vfs; /* * The number of allocated multicast filters for this * function on the RX side. */ uint32_t alloc_mcast_filters; /* * The number of allocated HW ring groups for this * function. */ uint32_t alloc_hw_ring_grps; /* * The number of strict priority transmit rings out of * currently allocated TX rings to the function * (alloc_tx_rings). */ uint16_t alloc_sp_tx_rings; /* * The number of statistics contexts * currently reserved for the function. */ uint16_t alloc_stat_ctx; /* * This field specifies how many NQs are reserved for the PF. * Remaining NQs that belong to the PF are available for VFs. * Once a PF has created VFs, it cannot change how many NQs are * reserved for itself (since the NQs must be contiguous in HW). */ uint16_t alloc_msix; uint8_t unused_2[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_func_vlan_qcfg * ***********************/ /* hwrm_func_vlan_qcfg_input (size:192b/24B) */ struct hwrm_func_vlan_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being * configured. * If set to 0xFF... (All Fs), then the configuration is * for the requesting function. */ uint16_t fid; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_func_vlan_qcfg_output (size:320b/40B) */ struct hwrm_func_vlan_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; /* S-TAG VLAN identifier configured for the function. */ uint16_t stag_vid; /* S-TAG PCP value configured for the function. */ uint8_t stag_pcp; uint8_t unused_1; /* * S-TAG TPID value configured for the function. This field is specified in * network byte order. */ uint16_t stag_tpid; /* C-TAG VLAN identifier configured for the function. */ uint16_t ctag_vid; /* C-TAG PCP value configured for the function. */ uint8_t ctag_pcp; uint8_t unused_2; /* * C-TAG TPID value configured for the function. This field is specified in * network byte order. */ uint16_t ctag_tpid; /* Future use. */ uint32_t rsvd2; /* Future use. */ uint32_t rsvd3; uint32_t unused_3; } __attribute__((packed)); /********************** * hwrm_func_vlan_cfg * **********************/ /* hwrm_func_vlan_cfg_input (size:384b/48B) */ struct hwrm_func_vlan_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being * configured. * If set to 0xFF... (All Fs), then the configuration is * for the requesting function. */ uint16_t fid; uint8_t unused_0[2]; uint32_t enables; /* * This bit must be '1' for the stag_vid field to be * configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1) /* * This bit must be '1' for the ctag_vid field to be * configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2) /* * This bit must be '1' for the stag_pcp field to be * configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4) /* * This bit must be '1' for the ctag_pcp field to be * configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8) /* * This bit must be '1' for the stag_tpid field to be * configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10) /* * This bit must be '1' for the ctag_tpid field to be * configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20) /* S-TAG VLAN identifier configured for the function. */ uint16_t stag_vid; /* S-TAG PCP value configured for the function. */ uint8_t stag_pcp; uint8_t unused_1; /* * S-TAG TPID value configured for the function. This field is specified in * network byte order. */ uint16_t stag_tpid; /* C-TAG VLAN identifier configured for the function. */ uint16_t ctag_vid; /* C-TAG PCP value configured for the function. */ uint8_t ctag_pcp; uint8_t unused_2; /* * C-TAG TPID value configured for the function. This field is specified in * network byte order. */ uint16_t ctag_tpid; /* Future use. */ uint32_t rsvd1; /* Future use. */ uint32_t rsvd2; uint8_t unused_3[4]; } __attribute__((packed)); /* hwrm_func_vlan_cfg_output (size:128b/16B) */ struct hwrm_func_vlan_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************** * hwrm_func_cfg * *****************/ /* hwrm_func_cfg_input (size:704b/88B) */ struct hwrm_func_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being * configured. * If set to 0xFF... (All Fs), then the the configuration is * for the requesting function. */ uint16_t fid; /* * This field specifies how many NQs will be reserved for the PF. * Remaining NQs that belong to the PF become available for VFs. * Once a PF has created VFs, it cannot change how many NQs are * reserved for itself (since the NQs must be contiguous in HW). */ uint16_t num_msix; uint32_t flags; /* * When this bit is '1', the function is disabled with * source MAC address check. * This is an anti-spoofing check. If this flag is set, * then the function shall be configured to disallow * transmission of frames with the source MAC address that * is configured for this function. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \ UINT32_C(0x1) /* * When this bit is '1', the function is enabled with * source MAC address check. * This is an anti-spoofing check. If this flag is set, * then the function shall be configured to allow * transmission of frames with the source MAC address that * is configured for this function. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \ UINT32_C(0x2) /* reserved. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK \ UINT32_C(0x1fc) #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2 /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. * If set to 1, then standard TX ring mode is requested to be * enabled on the function being configured. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \ UINT32_C(0x200) /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. * If set to 1, then the standard TX ring mode is requested to * be disabled on the function being configured. In this extended * TX ring resource mode, the minimum and maximum bandwidth settings * are not supported to allow the allocation of TX rings to * span multiple scheduler nodes. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \ UINT32_C(0x400) /* * If this bit is set, virtual mac address configured * in this command will be persistent over warm boot. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST \ UINT32_C(0x800) /* * This bit only applies to the VF. If this bit is set, the statistic * context counters will not be cleared when the statistic context is freed * or a function reset is called on VF. This bit will be cleared when the PF * is unloaded or a function reset is called on the PF. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \ UINT32_C(0x1000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of TX rings) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_TX_ASSETS_TEST \ UINT32_C(0x2000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of RX rings) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_RX_ASSETS_TEST \ UINT32_C(0x4000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of CMPL rings) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_CMPL_ASSETS_TEST \ UINT32_C(0x8000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of RSS ctx) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSSCOS_CTX_ASSETS_TEST \ UINT32_C(0x10000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of ring groups) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_RING_GRP_ASSETS_TEST \ UINT32_C(0x20000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of stat ctx) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_STAT_CTX_ASSETS_TEST \ UINT32_C(0x40000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of VNICs) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_VNIC_ASSETS_TEST \ UINT32_C(0x80000) /* * This bit requests that the firmware test to see if all the assets * requested in this command (i.e. number of L2 ctx) are available. * The firmware will return an error if the requested assets are * not available. The firwmare will NOT reserve the assets if they * are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_L2_CTX_ASSETS_TEST \ UINT32_C(0x100000) uint32_t enables; /* * This bit must be '1' for the mtu field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU \ UINT32_C(0x1) /* * This bit must be '1' for the mru field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU \ UINT32_C(0x2) /* * This bit must be '1' for the num_rsscos_ctxs field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS \ UINT32_C(0x4) /* * This bit must be '1' for the num_cmpl_rings field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS \ UINT32_C(0x8) /* * This bit must be '1' for the num_tx_rings field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS \ UINT32_C(0x10) /* * This bit must be '1' for the num_rx_rings field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS \ UINT32_C(0x20) /* * This bit must be '1' for the num_l2_ctxs field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS \ UINT32_C(0x40) /* * This bit must be '1' for the num_vnics field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS \ UINT32_C(0x80) /* * This bit must be '1' for the num_stat_ctxs field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS \ UINT32_C(0x100) /* * This bit must be '1' for the dflt_mac_addr field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR \ UINT32_C(0x200) /* * This bit must be '1' for the dflt_vlan field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN \ UINT32_C(0x400) /* * This bit must be '1' for the dflt_ip_addr field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR \ UINT32_C(0x800) /* * This bit must be '1' for the min_bw field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW \ UINT32_C(0x1000) /* * This bit must be '1' for the max_bw field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW \ UINT32_C(0x2000) /* * This bit must be '1' for the async_event_cr field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR \ UINT32_C(0x4000) /* * This bit must be '1' for the vlan_antispoof_mode field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE \ UINT32_C(0x8000) /* * This bit must be '1' for the allowed_vlan_pris field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS \ UINT32_C(0x10000) /* * This bit must be '1' for the evb_mode field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE \ UINT32_C(0x20000) /* * This bit must be '1' for the num_mcast_filters field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS \ UINT32_C(0x40000) /* * This bit must be '1' for the num_hw_ring_grps field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS \ UINT32_C(0x80000) /* * This bit must be '1' for the cache_linesize field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_CACHE_LINESIZE \ UINT32_C(0x100000) /* * This bit must be '1' for the num_msix field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MSIX \ UINT32_C(0x200000) /* * The maximum transmission unit of the function. * The HWRM should make sure that the mtu of * the function does not exceed the mtu of the physical * port that this function is associated with. * * In addition to configuring mtu per function, it is * possible to configure mtu per transmit ring. * By default, the mtu of each transmit ring associated * with a function is equal to the mtu of the function. * The HWRM should make sure that the mtu of each transmit * ring that is assigned to a function has a valid mtu. */ uint16_t mtu; /* * The maximum receive unit of the function. * The HWRM should make sure that the mru of * the function does not exceed the mru of the physical * port that this function is associated with. * * In addition to configuring mru per function, it is * possible to configure mru per vnic. * By default, the mru of each vnic associated * with a function is equal to the mru of the function. * The HWRM should make sure that the mru of each vnic * that is assigned to a function has a valid mru. */ uint16_t mru; /* * The number of RSS/COS contexts requested for the * function. */ uint16_t num_rsscos_ctxs; /* * The number of completion rings requested for the * function. This does not include the rings allocated * to any children functions if any. */ uint16_t num_cmpl_rings; /* * The number of transmit rings requested for the function. * This does not include the rings allocated to any * children functions if any. */ uint16_t num_tx_rings; /* * The number of receive rings requested for the function. * This does not include the rings allocated * to any children functions if any. */ uint16_t num_rx_rings; /* The requested number of L2 contexts for the function. */ uint16_t num_l2_ctxs; /* The requested number of vnics for the function. */ uint16_t num_vnics; /* The requested number of statistic contexts for the function. */ uint16_t num_stat_ctxs; /* * The number of HW ring groups that should * be reserved for this function. */ uint16_t num_hw_ring_grps; /* The default MAC address for the function being configured. */ uint8_t dflt_mac_addr[6]; /* * The default VLAN for the function being configured. * This field's format is same as 802.1Q Tag's * Tag Control Information (TCI) format that includes both * Priority Code Point (PCP) and VLAN Identifier (VID). */ uint16_t dflt_vlan; /* * The default IP address for the function being configured. * This address is only used in enabling source property check. */ uint32_t dflt_ip_addr[4]; /* * Minimum BW allocated for this function. * The HWRM will translate this value into byte counter and * time interval used for the scheduler inside the device. */ uint32_t min_bw; /* The bandwidth value. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \ HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated for this function. * The HWRM will translate this value into byte counter and * time interval used for the scheduler inside the device. */ uint32_t max_bw; /* The bandwidth value. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \ HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID /* * ID of the target completion ring for receiving asynchronous * event completions. If this field is not valid, then the * HWRM shall use the default completion ring of the function * that is being configured as the target completion ring for * providing any asynchronous event completions for that * function. * If this field is valid, then the HWRM shall use the * completion ring identified by this ID as the target * completion ring for providing any asynchronous event * completions for the function that is being configured. */ uint16_t async_event_cr; /* VLAN Anti-spoofing mode. */ uint8_t vlan_antispoof_mode; /* No VLAN anti-spoofing checks are enabled */ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK \ UINT32_C(0x0) /* Validate VLAN against the configured VLAN(s) */ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \ UINT32_C(0x1) /* Insert VLAN if it does not exist, otherwise discard */ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \ UINT32_C(0x2) /* Insert VLAN if it does not exist, override VLAN if it exists */ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \ UINT32_C(0x3) #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_LAST \ HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN /* * This bit field defines VLAN PRIs that are allowed on * this function. * If nth bit is set, then VLAN PRI n is allowed on this * function. */ uint8_t allowed_vlan_pris; /* * The HWRM shall allow a PF driver to change EVB mode for the * partition it belongs to. * The HWRM shall not allow a VF driver to change the EVB mode. * The HWRM shall take into account the switching of EVB mode * from one to another and reconfigure hardware resources as * appropriately. * The switching from VEB to VEPA mode requires * the disabling of the loopback traffic. Additionally, * source knock outs are handled differently in VEB and VEPA * modes. */ uint8_t evb_mode; /* No Edge Virtual Bridging (EVB) */ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0) /* Virtual Ethernet Bridge (VEB) */ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1) /* Virtual Ethernet Port Aggregator (VEPA) */ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2) #define HWRM_FUNC_CFG_INPUT_EVB_MODE_LAST \ HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA uint8_t options; /* * This value indicates the PCIE device cache line size. * The cache line size allows the DMA writes to terminate and * start at the cache boundary. */ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_MASK \ UINT32_C(0x3) #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SFT 0 /* Cache Line Size 64 bytes */ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_64 \ UINT32_C(0x0) /* Cache Line Size 128 bytes */ #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 \ UINT32_C(0x1) #define HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_LAST \ HWRM_FUNC_CFG_INPUT_OPTIONS_CACHE_LINESIZE_SIZE_128 /* Reserved for future. */ #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_MASK \ UINT32_C(0xfc) #define HWRM_FUNC_CFG_INPUT_OPTIONS_RSVD_SFT 2 /* * The number of multicast filters that should * be reserved for this function on the RX side. */ uint16_t num_mcast_filters; } __attribute__((packed)); /* hwrm_func_cfg_output (size:128b/16B) */ struct hwrm_func_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************** * hwrm_func_qstats * ********************/ /* hwrm_func_qstats_input (size:192b/24B) */ struct hwrm_func_qstats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being queried. * 0xFF... (All Fs) if the query is for the requesting * function. */ uint16_t fid; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_func_qstats_output (size:1408b/176B) */ struct hwrm_func_qstats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Number of transmitted unicast packets on the function. */ uint64_t tx_ucast_pkts; /* Number of transmitted multicast packets on the function. */ uint64_t tx_mcast_pkts; /* Number of transmitted broadcast packets on the function. */ uint64_t tx_bcast_pkts; /* * Number of transmitted packets that were discarded due to * internal NIC resource problems. For transmit, this * can only happen if TMP is configured to allow dropping * in HOL blocking conditions, which is not a normal * configuration. */ uint64_t tx_discard_pkts; /* * Number of dropped packets on transmit path on the function. * These are packets that have been marked for drop by * the TE CFA block or are packets that exceeded the * transmit MTU limit for the function. */ uint64_t tx_drop_pkts; /* Number of transmitted bytes for unicast traffic on the function. */ uint64_t tx_ucast_bytes; /* Number of transmitted bytes for multicast traffic on the function. */ uint64_t tx_mcast_bytes; /* Number of transmitted bytes for broadcast traffic on the function. */ uint64_t tx_bcast_bytes; /* Number of received unicast packets on the function. */ uint64_t rx_ucast_pkts; /* Number of received multicast packets on the function. */ uint64_t rx_mcast_pkts; /* Number of received broadcast packets on the function. */ uint64_t rx_bcast_pkts; /* * Number of received packets that were discarded on the function * due to resource limitations. This can happen for 3 reasons. * # The BD used for the packet has a bad format. * # There were no BDs available in the ring for the packet. * # There were no BDs available on-chip for the packet. */ uint64_t rx_discard_pkts; /* * Number of dropped packets on received path on the function. * These are packets that have been marked for drop by the * RE CFA. */ uint64_t rx_drop_pkts; /* Number of received bytes for unicast traffic on the function. */ uint64_t rx_ucast_bytes; /* Number of received bytes for multicast traffic on the function. */ uint64_t rx_mcast_bytes; /* Number of received bytes for broadcast traffic on the function. */ uint64_t rx_bcast_bytes; /* Number of aggregated unicast packets on the function. */ uint64_t rx_agg_pkts; /* Number of aggregated unicast bytes on the function. */ uint64_t rx_agg_bytes; /* Number of aggregation events on the function. */ uint64_t rx_agg_events; /* Number of aborted aggregations on the function. */ uint64_t rx_agg_aborts; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_func_clr_stats * ***********************/ /* hwrm_func_clr_stats_input (size:192b/24B) */ struct hwrm_func_clr_stats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function. * 0xFF... (All Fs) if the query is for the requesting * function. */ uint16_t fid; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_func_clr_stats_output (size:128b/16B) */ struct hwrm_func_clr_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_func_vf_resc_free * **************************/ /* hwrm_func_vf_resc_free_input (size:192b/24B) */ struct hwrm_func_vf_resc_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This value is used to identify a Virtual Function (VF). * The scope of VF ID is local within a PF. */ uint16_t vf_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_func_vf_resc_free_output (size:128b/16B) */ struct hwrm_func_vf_resc_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************* * hwrm_func_vf_vnic_ids_query * *******************************/ /* hwrm_func_vf_vnic_ids_query_input (size:256b/32B) */ struct hwrm_func_vf_vnic_ids_query_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This value is used to identify a Virtual Function (VF). * The scope of VF ID is local within a PF. */ uint16_t vf_id; uint8_t unused_0[2]; /* Max number of vnic ids in vnic id table */ uint32_t max_vnic_id_cnt; /* This is the address for VF VNIC ID table */ uint64_t vnic_id_tbl_addr; } __attribute__((packed)); /* hwrm_func_vf_vnic_ids_query_output (size:128b/16B) */ struct hwrm_func_vf_vnic_ids_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * Actual number of vnic ids * * Each VNIC ID is written as a 32-bit number. */ uint32_t vnic_id_cnt; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_func_drv_rgtr * **********************/ /* hwrm_func_drv_rgtr_input (size:896b/112B) */ struct hwrm_func_drv_rgtr_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When this bit is '1', the function driver is requesting * all requests from its children VF drivers to be * forwarded to itself. * This flag can only be set by the PF driver. * If a VF driver sets this flag, it should be ignored * by the HWRM. */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1) /* * When this bit is '1', the function is requesting none of * the requests from its children VF drivers to be * forwarded to itself. * This flag can only be set by the PF driver. * If a VF driver sets this flag, it should be ignored * by the HWRM. */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2) /* * When this bit is '1', then ver_maj_8b, ver_min_8b, ver_upd_8b * fields shall be ignored and ver_maj, ver_min, ver_upd * and ver_patch shall be used for the driver version information. * When this bit is '0', then ver_maj_8b, ver_min_8b, ver_upd_8b * fields shall be used for the driver version information and * ver_maj, ver_min, ver_upd and ver_patch shall be ignored. */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_16BIT_VER_MODE UINT32_C(0x4) uint32_t enables; /* * This bit must be '1' for the os_type field to be * configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE \ UINT32_C(0x1) /* * This bit must be '1' for the ver field to be * configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER \ UINT32_C(0x2) /* * This bit must be '1' for the timestamp field to be * configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP \ UINT32_C(0x4) /* * This bit must be '1' for the vf_req_fwd field to be * configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_REQ_FWD \ UINT32_C(0x8) /* * This bit must be '1' for the async_event_fwd field to be * configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD \ UINT32_C(0x10) /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */ uint16_t os_type; /* Unknown */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0) /* Other OS not listed below. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1) /* MSDOS OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe) /* Windows OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12) /* Solaris OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d) /* Linux OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24) /* FreeBSD OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a) /* VMware ESXi OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68) /* Microsoft Windows 8 64-bit OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73) /* Microsoft Windows Server 2012 R2 OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74) /* UEFI driver. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI UINT32_C(0x8000) #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LAST \ HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UEFI /* This is the 8bit major version of the driver. */ uint8_t ver_maj_8b; /* This is the 8bit minor version of the driver. */ uint8_t ver_min_8b; /* This is the 8bit update version of the driver. */ uint8_t ver_upd_8b; uint8_t unused_0[3]; /* * This is a 32-bit timestamp provided by the driver for * keep alive. * The timestamp is in multiples of 1ms. */ uint32_t timestamp; uint8_t unused_1[4]; /* * This is a 256-bit bit mask provided by the PF driver for * letting the HWRM know what commands issued by the VF driver * to the HWRM should be forwarded to the PF driver. * Nth bit refers to the Nth req_type. * * Setting Nth bit to 1 indicates that requests from the * VF driver with req_type equal to N shall be forwarded to * the parent PF driver. * * This field is not valid for the VF driver. */ uint32_t vf_req_fwd[8]; /* * This is a 256-bit bit mask provided by the function driver * (PF or VF driver) to indicate the list of asynchronous event * completions to be forwarded. * * Nth bit refers to the Nth event_id. * * Setting Nth bit to 1 by the function driver shall result in * the HWRM forwarding asynchronous event completion with * event_id equal to N. * * If all bits are set to 0 (value of 0), then the HWRM shall * not forward any asynchronous event completion to this * function driver. */ uint32_t async_event_fwd[8]; /* This is the 16bit major version of the driver. */ uint16_t ver_maj; /* This is the 16bit minor version of the driver. */ uint16_t ver_min; /* This is the 16bit update version of the driver. */ uint16_t ver_upd; /* This is the 16bit patch version of the driver. */ uint16_t ver_patch; } __attribute__((packed)); /* hwrm_func_drv_rgtr_output (size:128b/16B) */ struct hwrm_func_drv_rgtr_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************ * hwrm_func_drv_unrgtr * ************************/ /* hwrm_func_drv_unrgtr_input (size:192b/24B) */ struct hwrm_func_drv_unrgtr_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When this bit is '1', the function driver is notifying * the HWRM to prepare for the shutdown. */ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \ UINT32_C(0x1) uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_func_drv_unrgtr_output (size:128b/16B) */ struct hwrm_func_drv_unrgtr_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_func_buf_rgtr * **********************/ /* hwrm_func_buf_rgtr_input (size:1024b/128B) */ struct hwrm_func_buf_rgtr_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the vf_id field to be * configured. */ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) /* * This bit must be '1' for the err_buf_addr field to be * configured. */ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2) /* * This value is used to identify a Virtual Function (VF). * The scope of VF ID is local within a PF. */ uint16_t vf_id; /* * This field represents the number of pages used for request * buffer(s). */ uint16_t req_buf_num_pages; /* * This field represents the page size used for request * buffer(s). */ uint16_t req_buf_page_size; /* 16 bytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_16B UINT32_C(0x4) /* 4 Kbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4K UINT32_C(0xc) /* 8 Kbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_8K UINT32_C(0xd) /* 64 Kbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_64K UINT32_C(0x10) /* 2 Mbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_2M UINT32_C(0x15) /* 4 Mbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_4M UINT32_C(0x16) /* 1 Gbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G UINT32_C(0x1e) #define HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_LAST \ HWRM_FUNC_BUF_RGTR_INPUT_REQ_BUF_PAGE_SIZE_1G /* The length of the request buffer per VF in bytes. */ uint16_t req_buf_len; /* The length of the response buffer in bytes. */ uint16_t resp_buf_len; uint8_t unused_0[2]; /* This field represents the page address of page #0. */ uint64_t req_buf_page_addr0; /* This field represents the page address of page #1. */ uint64_t req_buf_page_addr1; /* This field represents the page address of page #2. */ uint64_t req_buf_page_addr2; /* This field represents the page address of page #3. */ uint64_t req_buf_page_addr3; /* This field represents the page address of page #4. */ uint64_t req_buf_page_addr4; /* This field represents the page address of page #5. */ uint64_t req_buf_page_addr5; /* This field represents the page address of page #6. */ uint64_t req_buf_page_addr6; /* This field represents the page address of page #7. */ uint64_t req_buf_page_addr7; /* This field represents the page address of page #8. */ uint64_t req_buf_page_addr8; /* This field represents the page address of page #9. */ uint64_t req_buf_page_addr9; /* * This field is used to receive the error reporting from * the chipset. Only applicable for PFs. */ uint64_t error_buf_addr; /* * This field is used to receive the response forwarded by the * HWRM. */ uint64_t resp_buf_addr; } __attribute__((packed)); /* hwrm_func_buf_rgtr_output (size:128b/16B) */ struct hwrm_func_buf_rgtr_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************ * hwrm_func_buf_unrgtr * ************************/ /* hwrm_func_buf_unrgtr_input (size:192b/24B) */ struct hwrm_func_buf_unrgtr_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the vf_id field to be * configured. */ #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) /* * This value is used to identify a Virtual Function (VF). * The scope of VF ID is local within a PF. */ uint16_t vf_id; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_func_buf_unrgtr_output (size:128b/16B) */ struct hwrm_func_buf_unrgtr_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_func_drv_qver * **********************/ /* hwrm_func_drv_qver_input (size:192b/24B) */ struct hwrm_func_drv_qver_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Reserved for future use. */ uint32_t reserved; /* * Function ID of the function that is being queried. * 0xFF... (All Fs) if the query is for the requesting * function. */ uint16_t fid; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_func_drv_qver_output (size:192b/24B) */ struct hwrm_func_drv_qver_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value indicates the type of OS. The values are based on CIM_OperatingSystem.mof file as published by the DMTF. */ uint16_t os_type; /* Unknown */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UNKNOWN UINT32_C(0x0) /* Other OS not listed below. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_OTHER UINT32_C(0x1) /* MSDOS OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_MSDOS UINT32_C(0xe) /* Windows OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WINDOWS UINT32_C(0x12) /* Solaris OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_SOLARIS UINT32_C(0x1d) /* Linux OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LINUX UINT32_C(0x24) /* FreeBSD OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_FREEBSD UINT32_C(0x2a) /* VMware ESXi OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_ESXI UINT32_C(0x68) /* Microsoft Windows 8 64-bit OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN864 UINT32_C(0x73) /* Microsoft Windows Server 2012 R2 OS. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74) /* UEFI driver. */ #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI UINT32_C(0x8000) #define HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_LAST \ HWRM_FUNC_DRV_QVER_OUTPUT_OS_TYPE_UEFI /* This is the 8bit major version of the driver. */ uint8_t ver_maj_8b; /* This is the 8bit minor version of the driver. */ uint8_t ver_min_8b; /* This is the 8bit update version of the driver. */ uint8_t ver_upd_8b; uint8_t unused_0[2]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; /* This is the 16bit major version of the driver. */ uint16_t ver_maj; /* This is the 16bit minor version of the driver. */ uint16_t ver_min; /* This is the 16bit update version of the driver. */ uint16_t ver_upd; /* This is the 16bit patch version of the driver. */ uint16_t ver_patch; } __attribute__((packed)); /**************************** * hwrm_func_resource_qcaps * ****************************/ /* hwrm_func_resource_qcaps_input (size:192b/24B) */ struct hwrm_func_resource_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being queried. * 0xFF... (All Fs) if the query is for the requesting * function. */ uint16_t fid; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_func_resource_qcaps_output (size:448b/56B) */ struct hwrm_func_resource_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Maximum guaranteed number of VFs supported by PF. Not applicable for VFs. */ uint16_t max_vfs; /* Maximum guaranteed number of MSI-X vectors supported by function */ uint16_t max_msix; /* Hint of strategy to be used by PF driver to reserve resources for its VF */ uint16_t vf_reservation_strategy; /* The PF driver should evenly divide its remaining resources among all VFs. */ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MAXIMAL \ UINT32_C(0x0) /* The PF driver should only reserve minimal resources for each VF. */ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL \ UINT32_C(0x1) /* * The PF driver should not reserve any resources for each VF until the * the VF interface is brought up. */ #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC \ UINT32_C(0x2) #define HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_LAST \ HWRM_FUNC_RESOURCE_QCAPS_OUTPUT_VF_RESERVATION_STRATEGY_MINIMAL_STATIC /* Minimum guaranteed number of RSS/COS contexts */ uint16_t min_rsscos_ctx; /* Maximum non-guaranteed number of RSS/COS contexts */ uint16_t max_rsscos_ctx; /* Minimum guaranteed number of completion rings */ uint16_t min_cmpl_rings; /* Maximum non-guaranteed number of completion rings */ uint16_t max_cmpl_rings; /* Minimum guaranteed number of transmit rings */ uint16_t min_tx_rings; /* Maximum non-guaranteed number of transmit rings */ uint16_t max_tx_rings; /* Minimum guaranteed number of receive rings */ uint16_t min_rx_rings; /* Maximum non-guaranteed number of receive rings */ uint16_t max_rx_rings; /* Minimum guaranteed number of L2 contexts */ uint16_t min_l2_ctxs; /* Maximum non-guaranteed number of L2 contexts */ uint16_t max_l2_ctxs; /* Minimum guaranteed number of VNICs */ uint16_t min_vnics; /* Maximum non-guaranteed number of VNICs */ uint16_t max_vnics; /* Minimum guaranteed number of statistic contexts */ uint16_t min_stat_ctx; /* Maximum non-guaranteed number of statistic contexts */ uint16_t max_stat_ctx; /* Minimum guaranteed number of ring groups */ uint16_t min_hw_ring_grps; /* Maximum non-guaranteed number of ring groups */ uint16_t max_hw_ring_grps; /* * Maximum number of inputs into the transmit scheduler for this function. * The number of TX rings assigned to the function cannot exceed this value. */ uint16_t max_tx_scheduler_inputs; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************************** * hwrm_func_vf_resource_cfg * *****************************/ /* hwrm_func_vf_resource_cfg_input (size:448b/56B) */ struct hwrm_func_vf_resource_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* VF ID that is being configured by PF */ uint16_t vf_id; /* Maximum guaranteed number of MSI-X vectors for the function */ uint16_t max_msix; /* Minimum guaranteed number of RSS/COS contexts */ uint16_t min_rsscos_ctx; /* Maximum non-guaranteed number of RSS/COS contexts */ uint16_t max_rsscos_ctx; /* Minimum guaranteed number of completion rings */ uint16_t min_cmpl_rings; /* Maximum non-guaranteed number of completion rings */ uint16_t max_cmpl_rings; /* Minimum guaranteed number of transmit rings */ uint16_t min_tx_rings; /* Maximum non-guaranteed number of transmit rings */ uint16_t max_tx_rings; /* Minimum guaranteed number of receive rings */ uint16_t min_rx_rings; /* Maximum non-guaranteed number of receive rings */ uint16_t max_rx_rings; /* Minimum guaranteed number of L2 contexts */ uint16_t min_l2_ctxs; /* Maximum non-guaranteed number of L2 contexts */ uint16_t max_l2_ctxs; /* Minimum guaranteed number of VNICs */ uint16_t min_vnics; /* Maximum non-guaranteed number of VNICs */ uint16_t max_vnics; /* Minimum guaranteed number of statistic contexts */ uint16_t min_stat_ctx; /* Maximum non-guaranteed number of statistic contexts */ uint16_t max_stat_ctx; /* Minimum guaranteed number of ring groups */ uint16_t min_hw_ring_grps; /* Maximum non-guaranteed number of ring groups */ uint16_t max_hw_ring_grps; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_func_vf_resource_cfg_output (size:256b/32B) */ struct hwrm_func_vf_resource_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Reserved number of RSS/COS contexts */ uint16_t reserved_rsscos_ctx; /* Reserved number of completion rings */ uint16_t reserved_cmpl_rings; /* Reserved number of transmit rings */ uint16_t reserved_tx_rings; /* Reserved number of receive rings */ uint16_t reserved_rx_rings; /* Reserved number of L2 contexts */ uint16_t reserved_l2_ctxs; /* Reserved number of VNICs */ uint16_t reserved_vnics; /* Reserved number of statistic contexts */ uint16_t reserved_stat_ctx; /* Reserved number of ring groups */ uint16_t reserved_hw_ring_grps; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************************* * hwrm_func_backing_store_qcaps * *********************************/ /* hwrm_func_backing_store_qcaps_input (size:128b/16B) */ struct hwrm_func_backing_store_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_func_backing_store_qcaps_output (size:512b/64B) */ struct hwrm_func_backing_store_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Maximum number of QP context entries supported for this function. */ uint32_t qp_max_entries; /* * Minimum number of QP context entries that are needed to be reserved * for QP1 for the PF and its VFs. PF drivers must allocate at least * this many QP context entries, even if RoCE will not be used. */ uint16_t qp_min_qp1_entries; /* Maximum number of QP context entries that can be used for L2. */ uint16_t qp_max_l2_entries; /* Number of bytes that must be allocated for each context entry. */ uint16_t qp_entry_size; /* Maximum number of SRQ context entries that can be used for L2. */ uint16_t srq_max_l2_entries; /* Maximum number of SRQ context entries supported for this function. */ uint32_t srq_max_entries; /* Number of bytes that must be allocated for each context entry. */ uint16_t srq_entry_size; /* Maximum number of CQ context entries that can be used for L2. */ uint16_t cq_max_l2_entries; /* Maximum number of CQ context entries supported for this function. */ uint32_t cq_max_entries; /* Number of bytes that must be allocated for each context entry. */ uint16_t cq_entry_size; /* Maximum number of VNIC context entries supported for this function. */ uint16_t vnic_max_vnic_entries; /* Maximum number of Ring table context entries supported for this function. */ uint16_t vnic_max_ring_table_entries; /* Number of bytes that must be allocated for each context entry. */ uint16_t vnic_entry_size; /* Maximum number of statistic context entries supported for this function. */ uint32_t stat_max_entries; /* Number of bytes that must be allocated for each context entry. */ uint16_t stat_entry_size; /* Maximum number of TQM context entries supported per ring. */ uint16_t tqm_max_entries_per_ring; /* Number of bytes that must be allocated for each context entry. */ uint16_t tqm_entry_size; /* Number of bytes that must be allocated for each context entry. */ uint16_t mrav_entry_size; /* Maximum number of MR/AV context entries supported for this function. */ uint32_t mrav_max_entries; /* Maximum number of Timer context entries supported for this function. */ uint32_t tim_max_entries; /* Number of bytes that must be allocated for each context entry. */ uint16_t tim_entry_size; uint8_t unused_0; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************* * hwrm_func_backing_store_cfg * *******************************/ /* hwrm_func_backing_store_cfg_input (size:2048b/256B) */ struct hwrm_func_backing_store_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When set, the firmware only uses on-chip resources and does not * expect any backing store to be provided by the host driver. This * mode provides minimal L2 functionality (e.g. limited L2 resources, * no RoCE). */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_FLAGS_PREBOOT_MODE \ UINT32_C(0x1) uint32_t enables; /* * This bit must be '1' for the qp fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_QP \ UINT32_C(0x1) /* * This bit must be '1' for the srq fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_SRQ \ UINT32_C(0x2) /* * This bit must be '1' for the cq fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_CQ \ UINT32_C(0x4) /* * This bit must be '1' for the vnic fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_VNIC \ UINT32_C(0x8) /* * This bit must be '1' for the stat fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_STAT \ UINT32_C(0x10) /* * This bit must be '1' for the tqm_sp fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_SP \ UINT32_C(0x20) /* * This bit must be '1' for the tqm_ring0 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING0 \ UINT32_C(0x40) /* * This bit must be '1' for the tqm_ring1 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING1 \ UINT32_C(0x80) /* * This bit must be '1' for the tqm_ring2 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING2 \ UINT32_C(0x100) /* * This bit must be '1' for the tqm_ring3 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING3 \ UINT32_C(0x200) /* * This bit must be '1' for the tqm_ring4 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING4 \ UINT32_C(0x400) /* * This bit must be '1' for the tqm_ring5 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING5 \ UINT32_C(0x800) /* * This bit must be '1' for the tqm_ring6 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING6 \ UINT32_C(0x1000) /* * This bit must be '1' for the tqm_ring7 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TQM_RING7 \ UINT32_C(0x2000) /* * This bit must be '1' for the mrav fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_MRAV \ UINT32_C(0x4000) /* * This bit must be '1' for the tim fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_ENABLES_TIM \ UINT32_C(0x8000) /* QPC page size and level. */ uint8_t qpc_pg_size_qpc_lvl; /* QPC PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_LVL_LVL_2 /* QPC page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_QPC_PG_SIZE_PG_1G /* SRQ page size and level. */ uint8_t srq_pg_size_srq_lvl; /* SRQ PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_LVL_LVL_2 /* SRQ page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_SRQ_PG_SIZE_PG_1G /* CQ page size and level. */ uint8_t cq_pg_size_cq_lvl; /* CQ PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_LVL_LVL_2 /* CQ page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_CQ_PG_SIZE_PG_1G /* VNIC page size and level. */ uint8_t vnic_pg_size_vnic_lvl; /* VNIC PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_LVL_LVL_2 /* VNIC page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_VNIC_PG_SIZE_PG_1G /* Stat page size and level. */ uint8_t stat_pg_size_stat_lvl; /* Stat PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_LVL_LVL_2 /* Stat page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_STAT_PG_SIZE_PG_1G /* TQM slow path page size and level. */ uint8_t tqm_sp_pg_size_tqm_sp_lvl; /* TQM slow path PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_LVL_LVL_2 /* TQM slow path page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_SP_PG_SIZE_PG_1G /* TQM ring 0 page size and level. */ uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; /* TQM ring 0 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_LVL_LVL_2 /* TQM ring 0 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING0_PG_SIZE_PG_1G /* TQM ring 1 page size and level. */ uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; /* TQM ring 1 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_LVL_LVL_2 /* TQM ring 1 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING1_PG_SIZE_PG_1G /* TQM ring 2 page size and level. */ uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; /* TQM ring 2 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_LVL_LVL_2 /* TQM ring 2 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING2_PG_SIZE_PG_1G /* TQM ring 3 page size and level. */ uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; /* TQM ring 3 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_LVL_LVL_2 /* TQM ring 3 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING3_PG_SIZE_PG_1G /* TQM ring 4 page size and level. */ uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; /* TQM ring 4 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_LVL_LVL_2 /* TQM ring 4 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING4_PG_SIZE_PG_1G /* TQM ring 5 page size and level. */ uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; /* TQM ring 5 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_LVL_LVL_2 /* TQM ring 5 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING5_PG_SIZE_PG_1G /* TQM ring 6 page size and level. */ uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; /* TQM ring 6 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_LVL_LVL_2 /* TQM ring 6 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING6_PG_SIZE_PG_1G /* TQM ring 7 page size and level. */ uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; /* TQM ring 7 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_LVL_LVL_2 /* TQM ring 7 page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TQM_RING7_PG_SIZE_PG_1G /* MR/AV page size and level. */ uint8_t mrav_pg_size_mrav_lvl; /* MR/AV PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_LVL_LVL_2 /* MR/AV page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_MRAV_PG_SIZE_PG_1G /* Timer page size and level. */ uint8_t tim_pg_size_tim_lvl; /* Timer PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_LVL_LVL_2 /* Timer page size. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_CFG_INPUT_TIM_PG_SIZE_PG_1G /* QP page directory. */ uint64_t qpc_page_dir; /* SRQ page directory. */ uint64_t srq_page_dir; /* CQ page directory. */ uint64_t cq_page_dir; /* VNIC page directory. */ uint64_t vnic_page_dir; /* Stat page directory. */ uint64_t stat_page_dir; /* TQM slowpath page directory. */ uint64_t tqm_sp_page_dir; /* TQM ring 0 page directory. */ uint64_t tqm_ring0_page_dir; /* TQM ring 1 page directory. */ uint64_t tqm_ring1_page_dir; /* TQM ring 2 page directory. */ uint64_t tqm_ring2_page_dir; /* TQM ring 3 page directory. */ uint64_t tqm_ring3_page_dir; /* TQM ring 4 page directory. */ uint64_t tqm_ring4_page_dir; /* TQM ring 5 page directory. */ uint64_t tqm_ring5_page_dir; /* TQM ring 6 page directory. */ uint64_t tqm_ring6_page_dir; /* TQM ring 7 page directory. */ uint64_t tqm_ring7_page_dir; /* MR/AV page directory. */ uint64_t mrav_page_dir; /* Timer page directory. */ uint64_t tim_page_dir; /* Number of QPs. */ uint32_t qp_num_entries; /* Number of SRQs. */ uint32_t srq_num_entries; /* Number of CQs. */ uint32_t cq_num_entries; /* Number of Stats. */ uint32_t stat_num_entries; /* Number of TQM slowpath entries. */ uint32_t tqm_sp_num_entries; /* Number of TQM ring 0 entries. */ uint32_t tqm_ring0_num_entries; /* Number of TQM ring 1 entries. */ uint32_t tqm_ring1_num_entries; /* Number of TQM ring 2 entries. */ uint32_t tqm_ring2_num_entries; /* Number of TQM ring 3 entries. */ uint32_t tqm_ring3_num_entries; /* Number of TQM ring 4 entries. */ uint32_t tqm_ring4_num_entries; /* Number of TQM ring 5 entries. */ uint32_t tqm_ring5_num_entries; /* Number of TQM ring 6 entries. */ uint32_t tqm_ring6_num_entries; /* Number of TQM ring 7 entries. */ uint32_t tqm_ring7_num_entries; /* Number of MR/AV entries. */ uint32_t mrav_num_entries; /* Number of Timer entries. */ uint32_t tim_num_entries; /* Number of entries to reserve for QP1 */ uint16_t qp_num_qp1_entries; /* Number of entries to reserve for L2 */ uint16_t qp_num_l2_entries; /* Number of bytes that have been allocated for each context entry. */ uint16_t qp_entry_size; /* Number of entries to reserve for L2 */ uint16_t srq_num_l2_entries; /* Number of bytes that have been allocated for each context entry. */ uint16_t srq_entry_size; /* Number of entries to reserve for L2 */ uint16_t cq_num_l2_entries; /* Number of bytes that have been allocated for each context entry. */ uint16_t cq_entry_size; /* Number of entries to reserve for VNIC entries */ uint16_t vnic_num_vnic_entries; /* Number of entries to reserve for Ring table entries */ uint16_t vnic_num_ring_table_entries; /* Number of bytes that have been allocated for each context entry. */ uint16_t vnic_entry_size; /* Number of bytes that have been allocated for each context entry. */ uint16_t stat_entry_size; /* Number of bytes that have been allocated for each context entry. */ uint16_t tqm_entry_size; /* Number of bytes that have been allocated for each context entry. */ uint16_t mrav_entry_size; /* Number of bytes that have been allocated for each context entry. */ uint16_t tim_entry_size; } __attribute__((packed)); /* hwrm_func_backing_store_cfg_output (size:128b/16B) */ struct hwrm_func_backing_store_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************** * hwrm_func_backing_store_qcfg * ********************************/ /* hwrm_func_backing_store_qcfg_input (size:128b/16B) */ struct hwrm_func_backing_store_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_func_backing_store_qcfg_output (size:1920b/240B) */ struct hwrm_func_backing_store_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint32_t flags; /* * When set, the firmware only uses on-chip resources and does not * expect any backing store to be provided by the host driver. This * mode provides minimal L2 functionality (e.g. limited L2 resources, * no RoCE). */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_FLAGS_PREBOOT_MODE \ UINT32_C(0x1) uint8_t unused_0[4]; /* * This bit must be '1' for the qp fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_QP \ UINT32_C(0x1) /* * This bit must be '1' for the srq fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_SRQ \ UINT32_C(0x2) /* * This bit must be '1' for the cq fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_CQ \ UINT32_C(0x4) /* * This bit must be '1' for the vnic fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_VNIC \ UINT32_C(0x8) /* * This bit must be '1' for the stat fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_STAT \ UINT32_C(0x10) /* * This bit must be '1' for the tqm_sp fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_SP \ UINT32_C(0x20) /* * This bit must be '1' for the tqm_ring0 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING0 \ UINT32_C(0x40) /* * This bit must be '1' for the tqm_ring1 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING1 \ UINT32_C(0x80) /* * This bit must be '1' for the tqm_ring2 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING2 \ UINT32_C(0x100) /* * This bit must be '1' for the tqm_ring3 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING3 \ UINT32_C(0x200) /* * This bit must be '1' for the tqm_ring4 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING4 \ UINT32_C(0x400) /* * This bit must be '1' for the tqm_ring5 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING5 \ UINT32_C(0x800) /* * This bit must be '1' for the tqm_ring6 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING6 \ UINT32_C(0x1000) /* * This bit must be '1' for the tqm_ring7 fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TQM_RING7 \ UINT32_C(0x2000) /* * This bit must be '1' for the mrav fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_MRAV \ UINT32_C(0x4000) /* * This bit must be '1' for the tim fields to be * configured. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_UNUSED_0_TIM \ UINT32_C(0x8000) /* QPC page size and level. */ uint8_t qpc_pg_size_qpc_lvl; /* QPC PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_LVL_LVL_2 /* QPC page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_QPC_PG_SIZE_PG_1G /* SRQ page size and level. */ uint8_t srq_pg_size_srq_lvl; /* SRQ PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_LVL_LVL_2 /* SRQ page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_SRQ_PG_SIZE_PG_1G /* CQ page size and level. */ uint8_t cq_pg_size_cq_lvl; /* CQ PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_LVL_LVL_2 /* CQ page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_CQ_PG_SIZE_PG_1G /* VNIC page size and level. */ uint8_t vnic_pg_size_vnic_lvl; /* VNIC PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_LVL_LVL_2 /* VNIC page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_VNIC_PG_SIZE_PG_1G /* Stat page size and level. */ uint8_t stat_pg_size_stat_lvl; /* Stat PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_LVL_LVL_2 /* Stat page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_STAT_PG_SIZE_PG_1G /* TQM slow path page size and level. */ uint8_t tqm_sp_pg_size_tqm_sp_lvl; /* TQM slow path PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_LVL_LVL_2 /* TQM slow path page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_SP_PG_SIZE_PG_1G /* TQM ring 0 page size and level. */ uint8_t tqm_ring0_pg_size_tqm_ring0_lvl; /* TQM ring 0 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_LVL_LVL_2 /* TQM ring 0 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING0_PG_SIZE_PG_1G /* TQM ring 1 page size and level. */ uint8_t tqm_ring1_pg_size_tqm_ring1_lvl; /* TQM ring 1 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_LVL_LVL_2 /* TQM ring 1 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING1_PG_SIZE_PG_1G /* TQM ring 2 page size and level. */ uint8_t tqm_ring2_pg_size_tqm_ring2_lvl; /* TQM ring 2 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_LVL_LVL_2 /* TQM ring 2 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING2_PG_SIZE_PG_1G /* TQM ring 3 page size and level. */ uint8_t tqm_ring3_pg_size_tqm_ring3_lvl; /* TQM ring 3 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_LVL_LVL_2 /* TQM ring 3 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING3_PG_SIZE_PG_1G /* TQM ring 4 page size and level. */ uint8_t tqm_ring4_pg_size_tqm_ring4_lvl; /* TQM ring 4 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_LVL_LVL_2 /* TQM ring 4 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING4_PG_SIZE_PG_1G /* TQM ring 5 page size and level. */ uint8_t tqm_ring5_pg_size_tqm_ring5_lvl; /* TQM ring 5 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_LVL_LVL_2 /* TQM ring 5 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING5_PG_SIZE_PG_1G /* TQM ring 6 page size and level. */ uint8_t tqm_ring6_pg_size_tqm_ring6_lvl; /* TQM ring 6 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_LVL_LVL_2 /* TQM ring 6 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING6_PG_SIZE_PG_1G /* TQM ring 7 page size and level. */ uint8_t tqm_ring7_pg_size_tqm_ring7_lvl; /* TQM ring 7 PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_LVL_LVL_2 /* TQM ring 7 page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TQM_RING7_PG_SIZE_PG_1G /* MR/AV page size and level. */ uint8_t mrav_pg_size_mrav_lvl; /* MR/AV PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_LVL_LVL_2 /* MR/AV page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_MRAV_PG_SIZE_PG_1G /* Timer page size and level. */ uint8_t tim_pg_size_tim_lvl; /* Timer PBL indirect levels. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_MASK \ UINT32_C(0xf) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_SFT 0 /* PBL pointer is physical start address. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_0 \ UINT32_C(0x0) /* PBL pointer points to PTE table. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_1 \ UINT32_C(0x1) /* PBL pointer points to PDE table with each entry pointing to PTE tables. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 \ UINT32_C(0x2) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_LVL_LVL_2 /* Timer page size. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_MASK \ UINT32_C(0xf0) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_SFT 4 /* 4KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_4K \ (UINT32_C(0x0) << 4) /* 8KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8K \ (UINT32_C(0x1) << 4) /* 64KB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_64K \ (UINT32_C(0x2) << 4) /* 2MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_2M \ (UINT32_C(0x3) << 4) /* 8MB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_8M \ (UINT32_C(0x4) << 4) /* 1GB. */ #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G \ (UINT32_C(0x5) << 4) #define HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_LAST \ HWRM_FUNC_BACKING_STORE_QCFG_OUTPUT_TIM_PG_SIZE_PG_1G /* QP page directory. */ uint64_t qpc_page_dir; /* SRQ page directory. */ uint64_t srq_page_dir; /* CQ page directory. */ uint64_t cq_page_dir; /* VNIC page directory. */ uint64_t vnic_page_dir; /* Stat page directory. */ uint64_t stat_page_dir; /* TQM slowpath page directory. */ uint64_t tqm_sp_page_dir; /* TQM ring 0 page directory. */ uint64_t tqm_ring0_page_dir; /* TQM ring 1 page directory. */ uint64_t tqm_ring1_page_dir; /* TQM ring 2 page directory. */ uint64_t tqm_ring2_page_dir; /* TQM ring 3 page directory. */ uint64_t tqm_ring3_page_dir; /* TQM ring 4 page directory. */ uint64_t tqm_ring4_page_dir; /* TQM ring 5 page directory. */ uint64_t tqm_ring5_page_dir; /* TQM ring 6 page directory. */ uint64_t tqm_ring6_page_dir; /* TQM ring 7 page directory. */ uint64_t tqm_ring7_page_dir; /* MR/AV page directory. */ uint64_t mrav_page_dir; /* Timer page directory. */ uint64_t tim_page_dir; /* Number of entries to reserve for QP1 */ uint16_t qp_num_qp1_entries; /* Number of entries to reserve for L2 */ uint16_t qp_num_l2_entries; /* Number of QPs. */ uint32_t qp_num_entries; /* Number of SRQs. */ uint32_t srq_num_entries; /* Number of entries to reserve for L2 */ uint16_t srq_num_l2_entries; /* Number of entries to reserve for L2 */ uint16_t cq_num_l2_entries; /* Number of CQs. */ uint32_t cq_num_entries; /* Number of entries to reserve for VNIC entries */ uint16_t vnic_num_vnic_entries; /* Number of entries to reserve for Ring table entries */ uint16_t vnic_num_ring_table_entries; /* Number of Stats. */ uint32_t stat_num_entries; /* Number of TQM slowpath entries. */ uint32_t tqm_sp_num_entries; /* Number of TQM ring 0 entries. */ uint32_t tqm_ring0_num_entries; /* Number of TQM ring 1 entries. */ uint32_t tqm_ring1_num_entries; /* Number of TQM ring 2 entries. */ uint32_t tqm_ring2_num_entries; /* Number of TQM ring 3 entries. */ uint32_t tqm_ring3_num_entries; /* Number of TQM ring 4 entries. */ uint32_t tqm_ring4_num_entries; /* Number of TQM ring 5 entries. */ uint32_t tqm_ring5_num_entries; /* Number of TQM ring 6 entries. */ uint32_t tqm_ring6_num_entries; /* Number of TQM ring 7 entries. */ uint32_t tqm_ring7_num_entries; /* Number of MR/AV entries. */ uint32_t mrav_num_entries; /* Number of Timer entries. */ uint32_t tim_num_entries; uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_port_phy_cfg * *********************/ /* hwrm_port_phy_cfg_input (size:448b/56B) */ struct hwrm_port_phy_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When this bit is set to '1', the PHY for the port shall * be reset. * * # If this bit is set to 1, then the HWRM shall reset the * PHY after applying PHY configuration changes specified * in this command. * # In order to guarantee that PHY configuration changes * specified in this command take effect, the HWRM * client should set this flag to 1. * # If this bit is not set to 1, then the HWRM may reset * the PHY depending on the current PHY configuration and * settings specified in this command. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY \ UINT32_C(0x1) /* deprecated bit. Do not use!!! */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED \ UINT32_C(0x2) /* * When this bit is set to '1', the link shall be forced to * the force_link_speed value. * * When this bit is set to '1', the HWRM client should * not enable any of the auto negotiation related * fields represented by auto_XXX fields in this command. * When this bit is set to '1' and the HWRM client has * enabled a auto_XXX field in this command, then the * HWRM shall ignore the enabled auto_XXX field. * * When this bit is set to zero, the link * shall be allowed to autoneg. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE \ UINT32_C(0x4) /* * When this bit is set to '1', the auto-negotiation process * shall be restarted on the link. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG \ UINT32_C(0x8) /* * When this bit is set to '1', Energy Efficient Ethernet * (EEE) is requested to be enabled on this link. * If EEE is not supported on this port, then this flag * shall be ignored by the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE \ UINT32_C(0x10) /* * When this bit is set to '1', Energy Efficient Ethernet * (EEE) is requested to be disabled on this link. * If EEE is not supported on this port, then this flag * shall be ignored by the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE \ UINT32_C(0x20) /* * When this bit is set to '1' and EEE is enabled on this * link, then TX LPI is requested to be enabled on the link. * If EEE is not supported on this port, then this flag * shall be ignored by the HWRM. * If EEE is disabled on this port, then this flag shall be * ignored by the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE \ UINT32_C(0x40) /* * When this bit is set to '1' and EEE is enabled on this * link, then TX LPI is requested to be disabled on the link. * If EEE is not supported on this port, then this flag * shall be ignored by the HWRM. * If EEE is disabled on this port, then this flag shall be * ignored by the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE \ UINT32_C(0x80) /* * When set to 1, then the HWRM shall enable FEC autonegotitation * on this port if supported. * When set to 0, then this flag shall be ignored. * If FEC autonegotiation is not supported, then the HWRM shall ignore this * flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE \ UINT32_C(0x100) /* * When set to 1, then the HWRM shall disable FEC autonegotiation * on this port if supported. * When set to 0, then this flag shall be ignored. * If FEC autonegotiation is not supported, then the HWRM shall ignore this * flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \ UINT32_C(0x200) /* * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire Code) * on this port if supported. * When set to 0, then this flag shall be ignored. * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this * flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \ UINT32_C(0x400) /* * When set to 1, then the HWRM shall disable FEC CLAUSE 74 (Fire Code) * on this port if supported. * When set to 0, then this flag shall be ignored. * If FEC CLAUSE 74 is not supported, then the HWRM shall ignore this * flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \ UINT32_C(0x800) /* * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed Solomon) * on this port if supported. * When set to 0, then this flag shall be ignored. * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this * flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \ UINT32_C(0x1000) /* * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed Solomon) * on this port if supported. * When set to 0, then this flag shall be ignored. * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this * flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \ UINT32_C(0x2000) /* * When this bit is set to '1', the link shall be forced to * be taken down. * * # When this bit is set to '1", all other * command input settings related to the link speed shall * be ignored. * Once the link state is forced down, it can be * explicitly cleared from that state by setting this flag * to '0'. * # If this flag is set to '0', then the link shall be * cleared from forced down state if the link is in forced * down state. * There may be conditions (e.g. out-of-band or sideband * configuration changes for the link) outside the scope * of the HWRM implementation that may clear forced down * link state. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN \ UINT32_C(0x4000) uint32_t enables; /* * This bit must be '1' for the auto_mode field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE \ UINT32_C(0x1) /* * This bit must be '1' for the auto_duplex field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX \ UINT32_C(0x2) /* * This bit must be '1' for the auto_pause field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE \ UINT32_C(0x4) /* * This bit must be '1' for the auto_link_speed field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED \ UINT32_C(0x8) /* * This bit must be '1' for the auto_link_speed_mask field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \ UINT32_C(0x10) /* * This bit must be '1' for the wirespeed field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIRESPEED \ UINT32_C(0x20) /* * This bit must be '1' for the lpbk field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK \ UINT32_C(0x40) /* * This bit must be '1' for the preemphasis field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS \ UINT32_C(0x80) /* * This bit must be '1' for the force_pause field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE \ UINT32_C(0x100) /* * This bit must be '1' for the eee_link_speed_mask field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \ UINT32_C(0x200) /* * This bit must be '1' for the tx_lpi_timer field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER \ UINT32_C(0x400) /* Port ID of port that is to be configured. */ uint16_t port_id; /* * This is the speed that will be used if the force * bit is '1'. If unsupported speed is selected, an error * will be generated. */ uint16_t force_link_speed; /* 100Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff) #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_LAST \ HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB /* * This value is used to identify what autoneg mode is * used when the link speed is not being forced. */ uint8_t auto_mode; /* Disable autoneg or autoneg disabled. No speeds are selected. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0) /* Select all possible speeds for autoneg mode. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) /* * Select only the auto_link_speed speed for autoneg mode. This mode has * been DEPRECATED. An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) /* * Select the auto_link_speed or any speed below that speed for autoneg. * This mode has been DEPRECATED. An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) /* * Select the speeds based on the corresponding link speed mask value * that is provided. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_LAST \ HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK /* * This is the duplex setting that will be used if the autoneg_mode * is "one_speed" or "one_or_below". */ uint8_t auto_duplex; /* Half Duplex will be requested. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0) /* Full duplex will be requested. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1) /* Both Half and Full dupex will be requested. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2) #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_LAST \ HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH /* * This value is used to configure the pause that will be * used for autonegotiation. * Add text on the usage of auto_pause and force_pause. */ uint8_t auto_pause; /* * When this bit is '1', Generation of tx pause messages * has been requested. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX \ UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages * has been requested. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX \ UINT32_C(0x2) /* * When set to 1, the advertisement of pause is enabled. * * # When the auto_mode is not set to none and this flag is * set to 1, then the auto_pause bits on this port are being * advertised and autoneg pause results are being interpreted. * # When the auto_mode is not set to none and this * flag is set to 0, the pause is forced as indicated in * force_pause, and also advertised as auto_pause bits, but * the autoneg results are not interpreted since the pause * configuration is being forced. * # When the auto_mode is set to none and this flag is set to * 1, auto_pause bits should be ignored and should be set to 0. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE \ UINT32_C(0x4) uint8_t unused_0; /* * This is the speed that will be used if the autoneg_mode * is "one_speed" or "one_or_below". If an unsupported speed * is selected, an error will be generated. */ uint16_t auto_link_speed; /* 100Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff) #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_LAST \ HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB /* * This is a mask of link speeds that will be used if * autoneg_mode is "mask". If unsupported speed is enabled * an error will be generated. */ uint16_t auto_link_speed_mask; /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB \ UINT32_C(0x10) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \ UINT32_C(0x2000) /* This value controls the wirespeed feature. */ uint8_t wirespeed; /* Wirespeed feature is disabled. */ #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_OFF UINT32_C(0x0) /* Wirespeed feature is enabled. */ #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON UINT32_C(0x1) #define HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_LAST \ HWRM_PORT_PHY_CFG_INPUT_WIRESPEED_ON /* This value controls the loopback setting for the PHY. */ uint8_t lpbk; /* No loopback is selected. Normal operation. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0) /* * The HW will be configured with local loopback such that * host data is sent back to the host without modification. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1) /* * The HW will be configured with remote loopback such that * port logic will send packets back out the transmitter that * are received. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) /* * The HW will be configured with external loopback such that * host data is sent on the trasmitter and based on the external * loopback connection the data will be received without modification. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL UINT32_C(0x3) #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LAST \ HWRM_PORT_PHY_CFG_INPUT_LPBK_EXTERNAL /* * This value is used to configure the pause that will be * used for force mode. */ uint8_t force_pause; /* * When this bit is '1', Generation of tx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2) uint8_t unused_1; /* * This value controls the pre-emphasis to be used for the * link. Driver should not set this value (use * enable.preemphasis = 0) unless driver is sure of setting. * Normally HWRM FW will determine proper pre-emphasis. */ uint32_t preemphasis; /* * Setting for link speed mask that is used to * advertise speeds during autonegotiation when EEE is enabled. * This field is valid only when EEE is enabled. * The speeds specified in this field shall be a subset of * speeds specified in auto_link_speed_mask. * If EEE is enabled,then at least one speed shall be provided * in this mask. */ uint16_t eee_link_speed_mask; /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 \ UINT32_C(0x10) /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) uint8_t unused_2[2]; /* * Reuested setting of TX LPI timer in microseconds. * This field is valid only when EEE is enabled and TX LPI is * enabled. */ uint32_t tx_lpi_timer; #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff) #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0 uint32_t unused_3; } __attribute__((packed)); /* hwrm_port_phy_cfg_output (size:128b/16B) */ struct hwrm_port_phy_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_port_phy_cfg_cmd_err (size:64b/8B) */ struct hwrm_port_phy_cfg_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* Unable to complete operation due to invalid speed */ #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_ILLEGAL_SPEED UINT32_C(0x1) /* * retry the command since the phy is not ready. * retry count is returned in opaque_0. * This is only valid for the first command and * this value will not change for successive calls. * but if a 0 is returned at any time then this should * be treated as an un recoverable failure, * * retry interval in milli seconds is returned in opaque_1. * This specifies the time that user should wait before * issuing the next port_phy_cfg command. */ #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY UINT32_C(0x2) #define HWRM_PORT_PHY_CFG_CMD_ERR_CODE_LAST \ HWRM_PORT_PHY_CFG_CMD_ERR_CODE_RETRY uint8_t unused_0[7]; } __attribute__((packed)); /********************** * hwrm_port_phy_qcfg * **********************/ /* hwrm_port_phy_qcfg_input (size:192b/24B) */ struct hwrm_port_phy_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port that is to be queried. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_port_phy_qcfg_output (size:768b/96B) */ struct hwrm_port_phy_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value indicates the current link status. */ uint8_t link; /* There is no link or cable detected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0) /* There is no link, but a cable has been detected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1) /* There is a link. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2) #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK uint8_t unused_0; /* This value indicates the current link speed of the connection. */ uint16_t link_speed; /* 100Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff) #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB /* * This value is indicates the duplex of the current * configuration. */ uint8_t duplex_cfg; /* Half Duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_HALF UINT32_C(0x0) /* Full duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL UINT32_C(0x1) #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL /* * This value is used to indicate the current * pause configuration. When autoneg is enabled, this value * represents the autoneg results of pause configuration. */ uint8_t pause; /* * When this bit is '1', Generation of tx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2) /* * The supported speeds for the port. This is a bit mask. * For each speed that is supported, the corrresponding * bit will be set to '1'. */ uint16_t support_speeds; /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB \ UINT32_C(0x10) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB \ UINT32_C(0x2000) /* * Current setting of forced link speed. * When the link speed is not being forced, this * value shall be set to 0. */ uint16_t force_link_speed; /* 100Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB \ UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB \ UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \ UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB \ UINT32_C(0xffff) #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB /* Current setting of auto negotiation mode. */ uint8_t auto_mode; /* Disable autoneg or autoneg disabled. No speeds are selected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0) /* Select all possible speeds for autoneg mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) /* * Select only the auto_link_speed speed for autoneg mode. This mode has * been DEPRECATED. An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) /* * Select the auto_link_speed or any speed below that speed for autoneg. * This mode has been DEPRECATED. An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) /* * Select the speeds based on the corresponding link speed mask value * that is provided. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK /* * Current setting of pause autonegotiation. * Move autoneg_pause flag here. */ uint8_t auto_pause; /* * When this bit is '1', Generation of tx pause messages * has been requested. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX \ UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages * has been requested. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX \ UINT32_C(0x2) /* * When set to 1, the advertisement of pause is enabled. * * # When the auto_mode is not set to none and this flag is * set to 1, then the auto_pause bits on this port are being * advertised and autoneg pause results are being interpreted. * # When the auto_mode is not set to none and this * flag is set to 0, the pause is forced as indicated in * force_pause, and also advertised as auto_pause bits, but * the autoneg results are not interpreted since the pause * configuration is being forced. * # When the auto_mode is set to none and this flag is set to * 1, auto_pause bits should be ignored and should be set to 0. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE \ UINT32_C(0x4) /* * Current setting for auto_link_speed. This field is only * valid when auto_mode is set to "one_speed" or "one_or_below". */ uint16_t auto_link_speed; /* 100Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB \ UINT32_C(0xffff) #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB /* * Current setting for auto_link_speed_mask that is used to * advertise speeds during autonegotiation. * This field is only valid when auto_mode is set to "mask". * The speeds specified in this field shall be a subset of * supported speeds on this port. */ uint16_t auto_link_speed_mask; /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \ UINT32_C(0x10) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \ UINT32_C(0x2000) /* Current setting for wirespeed. */ uint8_t wirespeed; /* Wirespeed feature is disabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_OFF UINT32_C(0x0) /* Wirespeed feature is enabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON UINT32_C(0x1) #define HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_WIRESPEED_ON /* Current setting for loopback. */ uint8_t lpbk; /* No loopback is selected. Normal operation. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0) /* * The HW will be configured with local loopback such that * host data is sent back to the host without modification. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) /* * The HW will be configured with remote loopback such that * port logic will send packets back out the transmitter that * are received. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) /* * The HW will be configured with external loopback such that * host data is sent on the trasmitter and based on the external * loopback connection the data will be received without modification. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL UINT32_C(0x3) #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_EXTERNAL /* * Current setting of forced pause. * When the pause configuration is not being forced, then * this value shall be set to 0. */ uint8_t force_pause; /* * When this bit is '1', Generation of tx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2) /* * This value indicates the current status of the optics module on * this port. */ uint8_t module_status; /* Module is inserted and accepted */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE \ UINT32_C(0x0) /* Module is rejected and transmit side Laser is disabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX \ UINT32_C(0x1) /* Module mismatch warning. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG \ UINT32_C(0x2) /* Module is rejected and powered down. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN \ UINT32_C(0x3) /* Module is not inserted. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \ UINT32_C(0x4) /* Module status is not applicable. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \ UINT32_C(0xff) #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE /* Current setting for preemphasis. */ uint32_t preemphasis; /* This field represents the major version of the PHY. */ uint8_t phy_maj; /* This field represents the minor version of the PHY. */ uint8_t phy_min; /* This field represents the build version of the PHY. */ uint8_t phy_bld; /* This value represents a PHY type. */ uint8_t phy_type; /* Unknown */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN \ UINT32_C(0x0) /* BASE-CR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR \ UINT32_C(0x1) /* BASE-KR4 (Deprecated) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 \ UINT32_C(0x2) /* BASE-LR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR \ UINT32_C(0x3) /* BASE-SR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR \ UINT32_C(0x4) /* BASE-KR2 (Deprecated) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 \ UINT32_C(0x5) /* BASE-KX */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX \ UINT32_C(0x6) /* BASE-KR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR \ UINT32_C(0x7) /* BASE-T */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET \ UINT32_C(0x8) /* EEE capable BASE-T */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE \ UINT32_C(0x9) /* SGMII connected external PHY */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY \ UINT32_C(0xa) /* 25G_BASECR_CA_L */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L \ UINT32_C(0xb) /* 25G_BASECR_CA_S */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S \ UINT32_C(0xc) /* 25G_BASECR_CA_N */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N \ UINT32_C(0xd) /* 25G_BASESR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR \ UINT32_C(0xe) /* 100G_BASECR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 \ UINT32_C(0xf) /* 100G_BASESR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 \ UINT32_C(0x10) /* 100G_BASELR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 \ UINT32_C(0x11) /* 100G_BASEER4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 \ UINT32_C(0x12) /* 100G_BASESR10 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 \ UINT32_C(0x13) /* 40G_BASECR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 \ UINT32_C(0x14) /* 40G_BASESR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 \ UINT32_C(0x15) /* 40G_BASELR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 \ UINT32_C(0x16) /* 40G_BASEER4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 \ UINT32_C(0x17) /* 40G_ACTIVE_CABLE */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \ UINT32_C(0x18) /* 1G_baseT */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET \ UINT32_C(0x19) /* 1G_baseSX */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX \ UINT32_C(0x1a) /* 1G_baseCX */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX \ UINT32_C(0x1b) #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX /* This value represents a media type. */ uint8_t media_type; /* Unknown */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0) /* Twisted Pair */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1) /* Direct Attached Copper */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2) /* Fiber */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3) #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE /* This value represents a transceiver type. */ uint8_t xcvr_pkg_type; /* PHY and MAC are in the same package */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \ UINT32_C(0x1) /* PHY and MAC are in different packages */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \ UINT32_C(0x2) #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL uint8_t eee_config_phy_addr; /* This field represents PHY address. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK \ UINT32_C(0x1f) #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0 /* * This field represents flags related to EEE configuration. * These EEE configuration flags are valid only when the * auto_mode is not set to none (in other words autonegotiation * is enabled). */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK \ UINT32_C(0xe0) #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5 /* * When set to 1, Energy Efficient Ethernet (EEE) mode is enabled. * Speeds for autoneg with EEE mode enabled * are based on eee_link_speed_mask. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED \ UINT32_C(0x20) /* * This flag is valid only when eee_enabled is set to 1. * * # If eee_enabled is set to 0, then EEE mode is disabled * and this flag shall be ignored. * # If eee_enabled is set to 1 and this flag is set to 1, * then Energy Efficient Ethernet (EEE) mode is enabled * and in use. * # If eee_enabled is set to 1 and this flag is set to 0, * then Energy Efficient Ethernet (EEE) mode is enabled * but is currently not in use. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE \ UINT32_C(0x40) /* * This flag is valid only when eee_enabled is set to 1. * * # If eee_enabled is set to 0, then EEE mode is disabled * and this flag shall be ignored. * # If eee_enabled is set to 1 and this flag is set to 1, * then Energy Efficient Ethernet (EEE) mode is enabled * and TX LPI is enabled. * # If eee_enabled is set to 1 and this flag is set to 0, * then Energy Efficient Ethernet (EEE) mode is enabled * but TX LPI is disabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI \ UINT32_C(0x80) /* * When set to 1, the parallel detection is used to determine * the speed of the link partner. * * Parallel detection is used when a autonegotiation capable * device is connected to a link parter that is not capable * of autonegotiation. */ uint8_t parallel_detect; /* * When set to 1, the parallel detection is used to determine * the speed of the link partner. * * Parallel detection is used when a autonegotiation capable * device is connected to a link parter that is not capable * of autonegotiation. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1) /* * The advertised speeds for the port by the link partner. * Each advertised speed will be set to '1'. */ uint16_t link_partner_adv_speeds; /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \ UINT32_C(0x10) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \ UINT32_C(0x2000) /* * The advertised autoneg for the port by the link partner. * This field is deprecated and should be set to 0. */ uint8_t link_partner_adv_auto_mode; /* Disable autoneg or autoneg disabled. No speeds are selected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \ UINT32_C(0x0) /* Select all possible speeds for autoneg mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \ UINT32_C(0x1) /* * Select only the auto_link_speed speed for autoneg mode. This mode has * been DEPRECATED. An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \ UINT32_C(0x2) /* * Select the auto_link_speed or any speed below that speed for autoneg. * This mode has been DEPRECATED. An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \ UINT32_C(0x3) /* * Select the speeds based on the corresponding link speed mask value * that is provided. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \ UINT32_C(0x4) #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK /* The advertised pause settings on the port by the link partner. */ uint8_t link_partner_adv_pause; /* * When this bit is '1', Generation of tx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \ UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages * is supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \ UINT32_C(0x2) /* * Current setting for link speed mask that is used to * advertise speeds during autonegotiation when EEE is enabled. * This field is valid only when eee_enabled flags is set to 1. * The speeds specified in this field shall be a subset of * speeds specified in auto_link_speed_mask. */ uint16_t adv_eee_link_speed_mask; /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ UINT32_C(0x10) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) /* * Current setting for link speed mask that is advertised by * the link partner when EEE is enabled. * This field is valid only when eee_enabled flags is set to 1. */ uint16_t link_partner_adv_eee_link_speed_mask; /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ UINT32_C(0x10) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) uint32_t xcvr_identifier_type_tx_lpi_timer; /* * Current setting of TX LPI timer in microseconds. * This field is valid only when_eee_enabled flag is set to 1 * and tx_lpi_enabled is set to 1. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \ UINT32_C(0xffffff) #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0 /* This value represents transceiver identifier type. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \ UINT32_C(0xff000000) #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24 /* Unknown */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \ (UINT32_C(0x0) << 24) /* SFP/SFP+/SFP28 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \ (UINT32_C(0x3) << 24) /* QSFP+ */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \ (UINT32_C(0xc) << 24) /* QSFP+ */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \ (UINT32_C(0xd) << 24) /* QSFP28 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \ (UINT32_C(0x11) << 24) #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 /* * This value represents the current configuration of * Forward Error Correction (FEC) on the port. */ uint16_t fec_cfg; /* * When set to 1, then FEC is not supported on this port. If this flag * is set to 1, then all other FEC configuration flags shall be ignored. * When set to 0, then FEC is supported as indicated by other * configuration flags. * If no cable is attached and the HWRM does not yet know the FEC * capability, then the HWRM shall set this flag to 1 when reporting * FEC capability. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \ UINT32_C(0x1) /* * When set to 1, then FEC autonegotiation is supported on this port. * When set to 0, then FEC autonegotiation is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \ UINT32_C(0x2) /* * When set to 1, then FEC autonegotiation is enabled on this port. * When set to 0, then FEC autonegotiation is disabled if supported. * This flag should be ignored if FEC autonegotiation is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \ UINT32_C(0x4) /* * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on this port. * When set to 0, then FEC CLAUSE 74 (Fire Code) is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \ UINT32_C(0x8) /* * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on this port. * When set to 0, then FEC CLAUSE 74 (Fire Code) is disabled if supported. * This flag should be ignored if FEC CLAUSE 74 is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \ UINT32_C(0x10) /* * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port. * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \ UINT32_C(0x20) /* * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this port. * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported. * This flag should be ignored if FEC CLAUSE 91 is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \ UINT32_C(0x40) /* * This value is indicates the duplex of the current * connection state. */ uint8_t duplex_state; /* Half Duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0) /* Full duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1) #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_LAST \ HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL /* Option flags fields. */ uint8_t option_flags; /* When this bit is '1', Media auto detect is enabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_OPTION_FLAGS_MEDIA_AUTO_DETECT \ UINT32_C(0x1) /* * Up to 16 bytes of null padded ASCII string representing * PHY vendor. * If the string is set to null, then the vendor name is not * available. */ char phy_vendor_name[16]; /* * Up to 16 bytes of null padded ASCII string that * identifies vendor specific part number of the PHY. * If the string is set to null, then the vendor specific * part number is not available. */ char phy_vendor_partnumber[16]; uint8_t unused_2[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_port_mac_cfg * *********************/ /* hwrm_port_mac_cfg_input (size:320b/40B) */ struct hwrm_port_mac_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * In this field, there are a number of CoS mappings related flags * that are used to configure CoS mappings and their corresponding * priorities in the hardware. * For the priorities of CoS mappings, the HWRM uses the following * priority order (high to low) by default: * # vlan pri * # ip_dscp * # tunnel_vlan_pri * # default cos * * A subset of CoS mappings can be enabled. * If a priority is not specified for an enabled CoS mapping, the * priority will be assigned in the above order for the enabled CoS * mappings. For example, if vlan_pri and ip_dscp CoS mappings are * enabled and their priorities are not specified, the following * priority order (high to low) will be used by the HWRM: * # vlan_pri * # ip_dscp * # default cos * * vlan_pri CoS mapping together with default CoS with lower priority * are enabled by default by the HWRM. */ uint32_t flags; /* * When this bit is '1', this command will configure * the MAC to match the current link state of the PHY. * If the link is not established on the PHY, then this * bit has no effect. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_MATCH_LINK \ UINT32_C(0x1) /* * When this bit is set to '1', the inner VLAN PRI to CoS mapping * is requested to be enabled. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_ENABLE \ UINT32_C(0x2) /* * When this bit is set to '1', tunnel VLAN PRI field to * CoS mapping is requested to be enabled. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \ UINT32_C(0x4) /* * When this bit is set to '1', the IP DSCP to CoS mapping is * requested to be enabled. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_ENABLE \ UINT32_C(0x8) /* * When this bit is '1', the HWRM is requested to * enable timestamp capture capability on the receive side * of this port. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \ UINT32_C(0x10) /* * When this bit is '1', the HWRM is requested to * disable timestamp capture capability on the receive side * of this port. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_RX_TS_CAPTURE_DISABLE \ UINT32_C(0x20) /* * When this bit is '1', the HWRM is requested to * enable timestamp capture capability on the transmit side * of this port. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \ UINT32_C(0x40) /* * When this bit is '1', the HWRM is requested to * disable timestamp capture capability on the transmit side * of this port. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_PTP_TX_TS_CAPTURE_DISABLE \ UINT32_C(0x80) /* * When this bit is '1', the Out-Of-Box WoL is requested to * be enabled on this port. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_ENABLE \ UINT32_C(0x100) /* * When this bit is '1', the the Out-Of-Box WoL is requested to * be disabled on this port. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_OOB_WOL_DISABLE \ UINT32_C(0x200) /* * When this bit is set to '1', the inner VLAN PRI to CoS mapping * is requested to be disabled. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_VLAN_PRI2COS_DISABLE \ UINT32_C(0x400) /* * When this bit is set to '1', tunnel VLAN PRI field to * CoS mapping is requested to be disabled. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_TUNNEL_PRI2COS_DISABLE \ UINT32_C(0x800) /* * When this bit is set to '1', the IP DSCP to CoS mapping is * requested to be disabled. */ #define HWRM_PORT_MAC_CFG_INPUT_FLAGS_IP_DSCP2COS_DISABLE \ UINT32_C(0x1000) uint32_t enables; /* * This bit must be '1' for the ipg field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_IPG \ UINT32_C(0x1) /* * This bit must be '1' for the lpbk field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_LPBK \ UINT32_C(0x2) /* * This bit must be '1' for the vlan_pri2cos_map_pri field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_VLAN_PRI2COS_MAP_PRI \ UINT32_C(0x4) /* * This bit must be '1' for the tunnel_pri2cos_map_pri field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TUNNEL_PRI2COS_MAP_PRI \ UINT32_C(0x10) /* * This bit must be '1' for the dscp2cos_map_pri field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_DSCP2COS_MAP_PRI \ UINT32_C(0x20) /* * This bit must be '1' for the rx_ts_capture_ptp_msg_type field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_RX_TS_CAPTURE_PTP_MSG_TYPE \ UINT32_C(0x40) /* * This bit must be '1' for the tx_ts_capture_ptp_msg_type field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_TX_TS_CAPTURE_PTP_MSG_TYPE \ UINT32_C(0x80) /* * This bit must be '1' for the cos_field_cfg field to be * configured. */ #define HWRM_PORT_MAC_CFG_INPUT_ENABLES_COS_FIELD_CFG \ UINT32_C(0x100) /* Port ID of port that is to be configured. */ uint16_t port_id; /* * This value is used to configure the minimum IPG that will * be sent between packets by this port. */ uint8_t ipg; /* This value controls the loopback setting for the MAC. */ uint8_t lpbk; /* No loopback is selected. Normal operation. */ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_NONE UINT32_C(0x0) /* * The HW will be configured with local loopback such that * host data is sent back to the host without modification. */ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1) /* * The HW will be configured with remote loopback such that * port logic will send packets back out the transmitter that * are received. */ #define HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) #define HWRM_PORT_MAC_CFG_INPUT_LPBK_LAST \ HWRM_PORT_MAC_CFG_INPUT_LPBK_REMOTE /* * This value controls the priority setting of VLAN PRI to CoS * mapping based on VLAN Tags of inner packet headers of * tunneled packets or packet headers of non-tunneled packets. * * # Each XXX_pri variable shall have a unique priority value * when it is being specified. * # When comparing priorities of mappings, higher value * indicates higher priority. * For example, a value of 0-3 is returned where 0 is being * the lowest priority and 3 is being the highest priority. */ uint8_t vlan_pri2cos_map_pri; /* Reserved field. */ uint8_t reserved1; /* * This value controls the priority setting of VLAN PRI to CoS * mapping based on VLAN Tags of tunneled header. * This mapping only applies when tunneled headers * are present. * * # Each XXX_pri variable shall have a unique priority value * when it is being specified. * # When comparing priorities of mappings, higher value * indicates higher priority. * For example, a value of 0-3 is returned where 0 is being * the lowest priority and 3 is being the highest priority. */ uint8_t tunnel_pri2cos_map_pri; /* * This value controls the priority setting of IP DSCP to CoS * mapping based on inner IP header of tunneled packets or * IP header of non-tunneled packets. * * # Each XXX_pri variable shall have a unique priority value * when it is being specified. * # When comparing priorities of mappings, higher value * indicates higher priority. * For example, a value of 0-3 is returned where 0 is being * the lowest priority and 3 is being the highest priority. */ uint8_t dscp2pri_map_pri; /* * This is a 16-bit bit mask that is used to request a * specific configuration of time stamp capture of PTP messages * on the receive side of this port. * This field shall be ignored if the ptp_rx_ts_capture_enable * flag is not set in this command. * Otherwise, if bit 'i' is set, then the HWRM is being * requested to configure the receive side of the port to * capture the time stamp of every received PTP message * with messageType field value set to i. */ uint16_t rx_ts_capture_ptp_msg_type; /* * This is a 16-bit bit mask that is used to request a * specific configuration of time stamp capture of PTP messages * on the transmit side of this port. * This field shall be ignored if the ptp_tx_ts_capture_enable * flag is not set in this command. * Otherwise, if bit 'i' is set, then the HWRM is being * requested to configure the transmit sied of the port to * capture the time stamp of every transmitted PTP message * with messageType field value set to i. */ uint16_t tx_ts_capture_ptp_msg_type; /* Configuration of CoS fields. */ uint8_t cos_field_cfg; /* Reserved */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_RSVD1 \ UINT32_C(0x1) /* * This field is used to specify selection of VLAN PRI value * based on whether one or two VLAN Tags are present in * the inner packet headers of tunneled packets or * non-tunneled packets. * This field is valid only if inner VLAN PRI to CoS mapping * is enabled. * If VLAN PRI to CoS mapping is not enabled, then this * field shall be ignored. */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \ UINT32_C(0x6) #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \ 1 /* * Select inner VLAN PRI when 1 or 2 VLAN Tags are * present in the inner packet headers */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \ (UINT32_C(0x0) << 1) /* * Select outer VLAN Tag PRI when 2 VLAN Tags are * present in the inner packet headers. * No VLAN PRI shall be selected for this configuration * if only one VLAN Tag is present in the inner * packet headers. */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \ (UINT32_C(0x1) << 1) /* * Select outermost VLAN PRI when 1 or 2 VLAN Tags * are present in the inner packet headers */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \ (UINT32_C(0x2) << 1) /* Unspecified */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \ (UINT32_C(0x3) << 1) #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \ HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED /* * This field is used to specify selection of tunnel VLAN * PRI value based on whether one or two VLAN Tags are * present in tunnel headers. * This field is valid only if tunnel VLAN PRI to CoS mapping * is enabled. * If tunnel VLAN PRI to CoS mapping is not enabled, then this * field shall be ignored. */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \ UINT32_C(0x18) #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \ 3 /* * Select inner VLAN PRI when 1 or 2 VLAN Tags are * present in the tunnel packet headers */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \ (UINT32_C(0x0) << 3) /* * Select outer VLAN Tag PRI when 2 VLAN Tags are * present in the tunnel packet headers. * No tunnel VLAN PRI shall be selected for this * configuration if only one VLAN Tag is present in * the tunnel packet headers. */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \ (UINT32_C(0x1) << 3) /* * Select outermost VLAN PRI when 1 or 2 VLAN Tags * are present in the tunnel packet headers */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \ (UINT32_C(0x2) << 3) /* Unspecified */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \ (UINT32_C(0x3) << 3) #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \ HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED /* * This field shall be used to provide default CoS value * that has been configured on this port. * This field is valid only if default CoS mapping * is enabled. * If default CoS mapping is not enabled, then this * field shall be ignored. */ #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \ UINT32_C(0xe0) #define HWRM_PORT_MAC_CFG_INPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \ 5 uint8_t unused_0[3]; } __attribute__((packed)); /* hwrm_port_mac_cfg_output (size:128b/16B) */ struct hwrm_port_mac_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * This is the configured maximum length of Ethernet packet * payload that is allowed to be received on the port. * This value does not include the number of bytes used by * Ethernet header and trailer (CRC). */ uint16_t mru; /* * This is the configured maximum length of Ethernet packet * payload that is allowed to be transmitted on the port. * This value does not include the number of bytes used by * Ethernet header and trailer (CRC). */ uint16_t mtu; /* Current configuration of the IPG value. */ uint8_t ipg; /* Current value of the loopback value. */ uint8_t lpbk; /* No loopback is selected. Normal operation. */ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_NONE UINT32_C(0x0) /* * The HW will be configured with local loopback such that * host data is sent back to the host without modification. */ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) /* * The HW will be configured with remote loopback such that * port logic will send packets back out the transmitter that * are received. */ #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) #define HWRM_PORT_MAC_CFG_OUTPUT_LPBK_LAST \ HWRM_PORT_MAC_CFG_OUTPUT_LPBK_REMOTE uint8_t unused_0; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_port_mac_qcfg * **********************/ /* hwrm_port_mac_qcfg_input (size:192b/24B) */ struct hwrm_port_mac_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port that is to be configured. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_port_mac_qcfg_output (size:192b/24B) */ struct hwrm_port_mac_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * This is the configured maximum length of Ethernet packet * payload that is allowed to be received on the port. * This value does not include the number of bytes used by the * Ethernet header and trailer (CRC). */ uint16_t mru; /* * This is the configured maximum length of Ethernet packet * payload that is allowed to be transmitted on the port. * This value does not include the number of bytes used by the * Ethernet header and trailer (CRC). */ uint16_t mtu; /* * The minimum IPG that will * be sent between packets by this port. */ uint8_t ipg; /* The loopback setting for the MAC. */ uint8_t lpbk; /* No loopback is selected. Normal operation. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0) /* * The HW will be configured with local loopback such that * host data is sent back to the host without modification. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) /* * The HW will be configured with remote loopback such that * port logic will send packets back out the transmitter that * are received. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) #define HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_LAST \ HWRM_PORT_MAC_QCFG_OUTPUT_LPBK_REMOTE /* * Priority setting for VLAN PRI to CoS mapping. * # Each XXX_pri variable shall have a unique priority value * when it is being used. * # When comparing priorities of mappings, higher value * indicates higher priority. * For example, a value of 0-3 is returned where 0 is being * the lowest priority and 3 is being the highest priority. * # If the correspoding CoS mapping is not enabled, then this * field should be ignored. * # This value indicates the normalized priority value retained * in the HWRM. */ uint8_t vlan_pri2cos_map_pri; /* * In this field, a number of CoS mappings related flags * are used to indicate configured CoS mappings. */ uint8_t flags; /* * When this bit is set to '1', the inner VLAN PRI to CoS mapping * is enabled. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_VLAN_PRI2COS_ENABLE \ UINT32_C(0x1) /* * When this bit is set to '1', tunnel VLAN PRI field to * CoS mapping is enabled. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_TUNNEL_PRI2COS_ENABLE \ UINT32_C(0x2) /* * When this bit is set to '1', the IP DSCP to CoS mapping is * enabled. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_IP_DSCP2COS_ENABLE \ UINT32_C(0x4) /* * When this bit is '1', the Out-Of-Box WoL is enabled on this * port. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_OOB_WOL_ENABLE \ UINT32_C(0x8) /* When this bit is '1', PTP is enabled for RX on this port. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_RX_TS_CAPTURE_ENABLE \ UINT32_C(0x10) /* When this bit is '1', PTP is enabled for TX on this port. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_FLAGS_PTP_TX_TS_CAPTURE_ENABLE \ UINT32_C(0x20) /* * Priority setting for tunnel VLAN PRI to CoS mapping. * # Each XXX_pri variable shall have a unique priority value * when it is being used. * # When comparing priorities of mappings, higher value * indicates higher priority. * For example, a value of 0-3 is returned where 0 is being * the lowest priority and 3 is being the highest priority. * # If the correspoding CoS mapping is not enabled, then this * field should be ignored. * # This value indicates the normalized priority value retained * in the HWRM. */ uint8_t tunnel_pri2cos_map_pri; /* * Priority setting for DSCP to PRI mapping. * # Each XXX_pri variable shall have a unique priority value * when it is being used. * # When comparing priorities of mappings, higher value * indicates higher priority. * For example, a value of 0-3 is returned where 0 is being * the lowest priority and 3 is being the highest priority. * # If the correspoding CoS mapping is not enabled, then this * field should be ignored. * # This value indicates the normalized priority value retained * in the HWRM. */ uint8_t dscp2pri_map_pri; /* * This is a 16-bit bit mask that represents the * current configuration of time stamp capture of PTP messages * on the receive side of this port. * If bit 'i' is set, then the receive side of the port * is configured to capture the time stamp of every * received PTP message with messageType field value set * to i. * If all bits are set to 0 (i.e. field value set 0), * then the receive side of the port is not configured * to capture timestamp for PTP messages. * If all bits are set to 1, then the receive side of the * port is configured to capture timestamp for all PTP * messages. */ uint16_t rx_ts_capture_ptp_msg_type; /* * This is a 16-bit bit mask that represents the * current configuration of time stamp capture of PTP messages * on the transmit side of this port. * If bit 'i' is set, then the transmit side of the port * is configured to capture the time stamp of every * received PTP message with messageType field value set * to i. * If all bits are set to 0 (i.e. field value set 0), * then the transmit side of the port is not configured * to capture timestamp for PTP messages. * If all bits are set to 1, then the transmit side of the * port is configured to capture timestamp for all PTP * messages. */ uint16_t tx_ts_capture_ptp_msg_type; /* Configuration of CoS fields. */ uint8_t cos_field_cfg; /* Reserved */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_RSVD \ UINT32_C(0x1) /* * This field is used for selecting VLAN PRI value * based on whether one or two VLAN Tags are present in * the inner packet headers of tunneled packets or * non-tunneled packets. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_MASK \ UINT32_C(0x6) #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_SFT \ 1 /* * Select inner VLAN PRI when 1 or 2 VLAN Tags are * present in the inner packet headers */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_INNERMOST \ (UINT32_C(0x0) << 1) /* * Select outer VLAN Tag PRI when 2 VLAN Tags are * present in the inner packet headers. * No VLAN PRI is selected for this configuration * if only one VLAN Tag is present in the inner * packet headers. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTER \ (UINT32_C(0x1) << 1) /* * Select outermost VLAN PRI when 1 or 2 VLAN Tags * are present in the inner packet headers */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_OUTERMOST \ (UINT32_C(0x2) << 1) /* Unspecified */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED \ (UINT32_C(0x3) << 1) #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_LAST \ HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_VLAN_PRI_SEL_UNSPECIFIED /* * This field is used for selecting tunnel VLAN PRI value * based on whether one or two VLAN Tags are present in * the tunnel headers of tunneled packets. This selection * does not apply to non-tunneled packets. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_MASK \ UINT32_C(0x18) #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_SFT \ 3 /* * Select inner VLAN PRI when 1 or 2 VLAN Tags are * present in the tunnel packet headers */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_INNERMOST \ (UINT32_C(0x0) << 3) /* * Select outer VLAN Tag PRI when 2 VLAN Tags are * present in the tunnel packet headers. * No VLAN PRI is selected for this configuration * if only one VLAN Tag is present in the tunnel * packet headers. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTER \ (UINT32_C(0x1) << 3) /* * Select outermost VLAN PRI when 1 or 2 VLAN Tags * are present in the tunnel packet headers */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_OUTERMOST \ (UINT32_C(0x2) << 3) /* Unspecified */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED \ (UINT32_C(0x3) << 3) #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_LAST \ HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_T_VLAN_PRI_SEL_UNSPECIFIED /* * This field is used to provide default CoS value that * has been configured on this port. */ #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_MASK \ UINT32_C(0xe0) #define HWRM_PORT_MAC_QCFG_OUTPUT_COS_FIELD_CFG_DEFAULT_COS_SFT \ 5 /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_port_mac_ptp_qcfg * **************************/ /* hwrm_port_mac_ptp_qcfg_input (size:192b/24B) */ struct hwrm_port_mac_ptp_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port that is being queried. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_port_mac_ptp_qcfg_output (size:640b/80B) */ struct hwrm_port_mac_ptp_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * In this field, a number of PTP related flags * are used to indicate configured PTP capabilities. */ uint8_t flags; /* * When this bit is set to '1', the PTP related registers are * directly accessible by the host. */ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_DIRECT_ACCESS \ UINT32_C(0x1) /* * When this bit is set to '1', the PTP information is accessible * via HWRM commands. */ #define HWRM_PORT_MAC_PTP_QCFG_OUTPUT_FLAGS_HWRM_ACCESS \ UINT32_C(0x2) uint8_t unused_0[3]; /* Offset of the PTP register for the lower 32 bits of timestamp for RX. */ uint32_t rx_ts_reg_off_lower; /* Offset of the PTP register for the upper 32 bits of timestamp for RX. */ uint32_t rx_ts_reg_off_upper; /* Offset of the PTP register for the sequence ID for RX. */ uint32_t rx_ts_reg_off_seq_id; /* Offset of the first PTP source ID for RX. */ uint32_t rx_ts_reg_off_src_id_0; /* Offset of the second PTP source ID for RX. */ uint32_t rx_ts_reg_off_src_id_1; /* Offset of the third PTP source ID for RX. */ uint32_t rx_ts_reg_off_src_id_2; /* Offset of the domain ID for RX. */ uint32_t rx_ts_reg_off_domain_id; /* Offset of the PTP FIFO register for RX. */ uint32_t rx_ts_reg_off_fifo; /* Offset of the PTP advance FIFO register for RX. */ uint32_t rx_ts_reg_off_fifo_adv; /* PTP timestamp granularity for RX. */ uint32_t rx_ts_reg_off_granularity; /* Offset of the PTP register for the lower 32 bits of timestamp for TX. */ uint32_t tx_ts_reg_off_lower; /* Offset of the PTP register for the upper 32 bits of timestamp for TX. */ uint32_t tx_ts_reg_off_upper; /* Offset of the PTP register for the sequence ID for TX. */ uint32_t tx_ts_reg_off_seq_id; /* Offset of the PTP FIFO register for TX. */ uint32_t tx_ts_reg_off_fifo; /* PTP timestamp granularity for TX. */ uint32_t tx_ts_reg_off_granularity; uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************** * hwrm_port_qstats * ********************/ /* hwrm_port_qstats_input (size:320b/40B) */ struct hwrm_port_qstats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port that is being queried. */ uint16_t port_id; uint8_t unused_0[6]; /* * This is the host address where * Tx port statistics will be stored */ uint64_t tx_stat_host_addr; /* * This is the host address where * Rx port statistics will be stored */ uint64_t rx_stat_host_addr; } __attribute__((packed)); /* hwrm_port_qstats_output (size:128b/16B) */ struct hwrm_port_qstats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* The size of TX port statistics block in bytes. */ uint16_t tx_stat_size; /* The size of RX port statistics block in bytes. */ uint16_t rx_stat_size; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************ * hwrm_port_qstats_ext * ************************/ /* hwrm_port_qstats_ext_input (size:320b/40B) */ struct hwrm_port_qstats_ext_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port that is being queried. */ uint16_t port_id; /* * The size of TX port extended * statistics block in bytes. */ uint16_t tx_stat_size; /* * The size of RX port extended * statistics block in bytes */ uint16_t rx_stat_size; uint8_t unused_0[2]; /* * This is the host address where * Tx port statistics will be stored */ uint64_t tx_stat_host_addr; /* * This is the host address where * Rx port statistics will be stored */ uint64_t rx_stat_host_addr; } __attribute__((packed)); /* hwrm_port_qstats_ext_output (size:128b/16B) */ struct hwrm_port_qstats_ext_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* The size of TX port statistics block in bytes. */ uint16_t tx_stat_size; /* The size of RX port statistics block in bytes. */ uint16_t rx_stat_size; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_port_lpbk_qstats * *************************/ /* hwrm_port_lpbk_qstats_input (size:128b/16B) */ struct hwrm_port_lpbk_qstats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_port_lpbk_qstats_output (size:768b/96B) */ struct hwrm_port_lpbk_qstats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Number of transmitted unicast frames */ uint64_t lpbk_ucast_frames; /* Number of transmitted multicast frames */ uint64_t lpbk_mcast_frames; /* Number of transmitted broadcast frames */ uint64_t lpbk_bcast_frames; /* Number of transmitted bytes for unicast traffic */ uint64_t lpbk_ucast_bytes; /* Number of transmitted bytes for multicast traffic */ uint64_t lpbk_mcast_bytes; /* Number of transmitted bytes for broadcast traffic */ uint64_t lpbk_bcast_bytes; /* Total Tx Drops for loopback traffic reported by STATS block */ uint64_t tx_stat_discard; /* Total Tx Error Drops for loopback traffic reported by STATS block */ uint64_t tx_stat_error; /* Total Rx Drops for loopback traffic reported by STATS block */ uint64_t rx_stat_discard; /* Total Rx Error Drops for loopback traffic reported by STATS block */ uint64_t rx_stat_error; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_port_clr_stats * ***********************/ /* hwrm_port_clr_stats_input (size:192b/24B) */ struct hwrm_port_clr_stats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port that is being queried. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_port_clr_stats_output (size:128b/16B) */ struct hwrm_port_clr_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /**************************** * hwrm_port_lpbk_clr_stats * ****************************/ /* hwrm_port_lpbk_clr_stats_input (size:128b/16B) */ struct hwrm_port_lpbk_clr_stats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_port_lpbk_clr_stats_output (size:128b/16B) */ struct hwrm_port_lpbk_clr_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_port_ts_query * **********************/ /* hwrm_port_ts_query_input (size:192b/24B) */ struct hwrm_port_ts_query_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_LAST \ HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX /* Port ID of port that is being queried. */ uint16_t port_id; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_port_ts_query_output (size:192b/24B) */ struct hwrm_port_ts_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Timestamp value of PTP message captured. */ uint64_t ptp_msg_ts; /* Sequence ID of the PTP message captured. */ uint16_t ptp_msg_seqid; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_port_phy_qcaps * ***********************/ /* hwrm_port_phy_qcaps_input (size:192b/24B) */ struct hwrm_port_phy_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port that is being queried. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_port_phy_qcaps_output (size:192b/24B) */ struct hwrm_port_phy_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* PHY capability flags */ uint8_t flags; /* * If set to 1, then this field indicates that the * link is capable of supporting EEE. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EEE_SUPPORTED \ UINT32_C(0x1) /* * If set to 1, then this field indicates that the * PHY is capable of supporting external loopback. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_EXTERNAL_LPBK_SUPPORTED \ UINT32_C(0x2) /* * Reserved field. The HWRM shall set this field to 0. * An HWRM client shall ignore this field. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \ UINT32_C(0xfc) #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT 2 /* Number of front panel ports for this device. */ uint8_t port_cnt; /* Not supported or unknown */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_UNKNOWN UINT32_C(0x0) /* single port device */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_1 UINT32_C(0x1) /* 2-port device */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_2 UINT32_C(0x2) /* 3-port device */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_3 UINT32_C(0x3) /* 4-port device */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 UINT32_C(0x4) #define HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_LAST \ HWRM_PORT_PHY_QCAPS_OUTPUT_PORT_CNT_4 /* * This is a bit mask to indicate what speeds are supported * as forced speeds on this link. * For each speed that can be forced on this link, the * corresponding mask bit shall be set to '1'. */ uint16_t supported_speeds_force_mode; /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2GB \ UINT32_C(0x10) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_FORCE_MODE_10MB \ UINT32_C(0x2000) /* * This is a bit mask to indicate what speeds are supported * for autonegotiation on this link. * For each speed that can be autonegotiated on this link, the * corresponding mask bit shall be set to '1'. */ uint16_t supported_speeds_auto_mode; /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2GB \ UINT32_C(0x10) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_AUTO_MODE_10MB \ UINT32_C(0x2000) /* * This is a bit mask to indicate what speeds are supported * for EEE on this link. * For each speed that can be autonegotiated when EEE is enabled * on this link, the corresponding mask bit shall be set to '1'. * This field is only valid when the eee_suppotred is set to '1'. */ uint16_t supported_speeds_eee_mode; /* Reserved */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD1 \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_100MB \ UINT32_C(0x2) /* Reserved */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD2 \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_1GB \ UINT32_C(0x8) /* Reserved */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD3 \ UINT32_C(0x10) /* Reserved */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_RSVD4 \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_SUPPORTED_SPEEDS_EEE_MODE_10GB \ UINT32_C(0x40) uint32_t tx_lpi_timer_low; /* * The lowest value of TX LPI timer that can be set on this link * when EEE is enabled. This value is in microseconds. * This field is valid only when_eee_supported is set to '1'. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_MASK \ UINT32_C(0xffffff) #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_LOW_SFT 0 /* * Reserved field. The HWRM shall set this field to 0. * An HWRM client shall ignore this field. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_MASK \ UINT32_C(0xff000000) #define HWRM_PORT_PHY_QCAPS_OUTPUT_RSVD2_SFT 24 uint32_t valid_tx_lpi_timer_high; /* * The highest value of TX LPI timer that can be set on this link * when EEE is enabled. This value is in microseconds. * This field is valid only when_eee_supported is set to '1'. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_MASK \ UINT32_C(0xffffff) #define HWRM_PORT_PHY_QCAPS_OUTPUT_TX_LPI_TIMER_HIGH_SFT 0 /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_MASK \ UINT32_C(0xff000000) #define HWRM_PORT_PHY_QCAPS_OUTPUT_VALID_SFT 24 } __attribute__((packed)); /*************************** * hwrm_port_phy_i2c_write * ***************************/ /* hwrm_port_phy_i2c_write_input (size:832b/104B) */ struct hwrm_port_phy_i2c_write_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; uint32_t enables; /* * This bit must be '1' for the page_offset field to be * configured. */ #define HWRM_PORT_PHY_I2C_WRITE_INPUT_ENABLES_PAGE_OFFSET \ UINT32_C(0x1) /* Port ID of port. */ uint16_t port_id; /* 8-bit I2C slave address. */ uint8_t i2c_slave_addr; uint8_t unused_0; /* The page number that is being accessed over I2C. */ uint16_t page_number; /* Offset within the page that is being accessed over I2C. */ uint16_t page_offset; /* * Length of data to write, in bytes starting at the offset * specified above. If the offset is not specified, then * the data shall be written from the beginning of the page. */ uint8_t data_length; uint8_t unused_1[7]; /* Up to 64B of data. */ uint32_t data[16]; } __attribute__((packed)); /* hwrm_port_phy_i2c_write_output (size:128b/16B) */ struct hwrm_port_phy_i2c_write_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_port_phy_i2c_read * **************************/ /* hwrm_port_phy_i2c_read_input (size:320b/40B) */ struct hwrm_port_phy_i2c_read_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; uint32_t enables; /* * This bit must be '1' for the page_offset field to be * configured. */ #define HWRM_PORT_PHY_I2C_READ_INPUT_ENABLES_PAGE_OFFSET \ UINT32_C(0x1) /* Port ID of port. */ uint16_t port_id; /* 8-bit I2C slave address. */ uint8_t i2c_slave_addr; uint8_t unused_0; /* The page number that is being accessed over I2C. */ uint16_t page_number; /* Offset within the page that is being accessed over I2C. */ uint16_t page_offset; /* * Length of data to read, in bytes starting at the offset * specified above. If the offset is not specified, then * the data shall be read from the beginning of the page. */ uint8_t data_length; uint8_t unused_1[7]; } __attribute__((packed)); /* hwrm_port_phy_i2c_read_output (size:640b/80B) */ struct hwrm_port_phy_i2c_read_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Up to 64B of data. */ uint32_t data[16]; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_port_led_cfg * *********************/ /* hwrm_port_led_cfg_input (size:512b/64B) */ struct hwrm_port_led_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the led0_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID \ UINT32_C(0x1) /* * This bit must be '1' for the led0_state field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE \ UINT32_C(0x2) /* * This bit must be '1' for the led0_color field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR \ UINT32_C(0x4) /* * This bit must be '1' for the led0_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON \ UINT32_C(0x8) /* * This bit must be '1' for the led0_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF \ UINT32_C(0x10) /* * This bit must be '1' for the led0_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID \ UINT32_C(0x20) /* * This bit must be '1' for the led1_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID \ UINT32_C(0x40) /* * This bit must be '1' for the led1_state field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE \ UINT32_C(0x80) /* * This bit must be '1' for the led1_color field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR \ UINT32_C(0x100) /* * This bit must be '1' for the led1_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON \ UINT32_C(0x200) /* * This bit must be '1' for the led1_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF \ UINT32_C(0x400) /* * This bit must be '1' for the led1_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID \ UINT32_C(0x800) /* * This bit must be '1' for the led2_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID \ UINT32_C(0x1000) /* * This bit must be '1' for the led2_state field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE \ UINT32_C(0x2000) /* * This bit must be '1' for the led2_color field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR \ UINT32_C(0x4000) /* * This bit must be '1' for the led2_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON \ UINT32_C(0x8000) /* * This bit must be '1' for the led2_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF \ UINT32_C(0x10000) /* * This bit must be '1' for the led2_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID \ UINT32_C(0x20000) /* * This bit must be '1' for the led3_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID \ UINT32_C(0x40000) /* * This bit must be '1' for the led3_state field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE \ UINT32_C(0x80000) /* * This bit must be '1' for the led3_color field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR \ UINT32_C(0x100000) /* * This bit must be '1' for the led3_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON \ UINT32_C(0x200000) /* * This bit must be '1' for the led3_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \ UINT32_C(0x400000) /* * This bit must be '1' for the led3_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID \ UINT32_C(0x800000) /* Port ID of port whose LEDs are configured. */ uint16_t port_id; /* * The number of LEDs that are being configured. * Up to 4 LEDs can be configured with this command. */ uint8_t num_leds; /* Reserved field. */ uint8_t rsvd; /* An identifier for the LED #0. */ uint8_t led0_id; /* The requested state of the LED #0. */ uint8_t led0_state; /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_LAST \ HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT /* The requested color of LED #0. */ uint8_t led0_color; /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_LAST \ HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER uint8_t unused_0; /* * If the LED #0 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led0_blink_on; /* * If the LED #0 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led0_blink_off; /* * An identifier for the group of LEDs that LED #0 belongs * to. * If set to 0, then the LED #0 shall not be grouped and * shall be treated as an individual resource. * For all other non-zero values of this field, LED #0 shall * be grouped together with the LEDs with the same group ID * value. */ uint8_t led0_group_id; /* Reserved field. */ uint8_t rsvd0; /* An identifier for the LED #1. */ uint8_t led1_id; /* The requested state of the LED #1. */ uint8_t led1_state; /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_LAST \ HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT /* The requested color of LED #1. */ uint8_t led1_color; /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_LAST \ HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER uint8_t unused_1; /* * If the LED #1 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led1_blink_on; /* * If the LED #1 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led1_blink_off; /* * An identifier for the group of LEDs that LED #1 belongs * to. * If set to 0, then the LED #1 shall not be grouped and * shall be treated as an individual resource. * For all other non-zero values of this field, LED #1 shall * be grouped together with the LEDs with the same group ID * value. */ uint8_t led1_group_id; /* Reserved field. */ uint8_t rsvd1; /* An identifier for the LED #2. */ uint8_t led2_id; /* The requested state of the LED #2. */ uint8_t led2_state; /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_LAST \ HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT /* The requested color of LED #2. */ uint8_t led2_color; /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_LAST \ HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER uint8_t unused_2; /* * If the LED #2 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led2_blink_on; /* * If the LED #2 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led2_blink_off; /* * An identifier for the group of LEDs that LED #2 belongs * to. * If set to 0, then the LED #2 shall not be grouped and * shall be treated as an individual resource. * For all other non-zero values of this field, LED #2 shall * be grouped together with the LEDs with the same group ID * value. */ uint8_t led2_group_id; /* Reserved field. */ uint8_t rsvd2; /* An identifier for the LED #3. */ uint8_t led3_id; /* The requested state of the LED #3. */ uint8_t led3_state; /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_LAST \ HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT /* The requested color of LED #3. */ uint8_t led3_color; /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_LAST \ HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER uint8_t unused_3; /* * If the LED #3 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led3_blink_on; /* * If the LED #3 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led3_blink_off; /* * An identifier for the group of LEDs that LED #3 belongs * to. * If set to 0, then the LED #3 shall not be grouped and * shall be treated as an individual resource. * For all other non-zero values of this field, LED #3 shall * be grouped together with the LEDs with the same group ID * value. */ uint8_t led3_group_id; /* Reserved field. */ uint8_t rsvd3; } __attribute__((packed)); /* hwrm_port_led_cfg_output (size:128b/16B) */ struct hwrm_port_led_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_port_led_qcfg * **********************/ /* hwrm_port_led_qcfg_input (size:192b/24B) */ struct hwrm_port_led_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port whose LED configuration is being queried. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_port_led_qcfg_output (size:448b/56B) */ struct hwrm_port_led_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * The number of LEDs that are configured on this port. * Up to 4 LEDs can be returned in the response. */ uint8_t num_leds; /* An identifier for the LED #0. */ uint8_t led0_id; /* The type of LED #0. */ uint8_t led0_type; /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID /* The current state of the LED #0. */ uint8_t led0_state; /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT /* The color of LED #0. */ uint8_t led0_color; /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER uint8_t unused_0; /* * If the LED #0 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led0_blink_on; /* * If the LED #0 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led0_blink_off; /* * An identifier for the group of LEDs that LED #0 belongs * to. * If set to 0, then the LED #0 is not grouped. * For all other non-zero values of this field, LED #0 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led0_group_id; /* An identifier for the LED #1. */ uint8_t led1_id; /* The type of LED #1. */ uint8_t led1_type; /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID /* The current state of the LED #1. */ uint8_t led1_state; /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT /* The color of LED #1. */ uint8_t led1_color; /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER uint8_t unused_1; /* * If the LED #1 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led1_blink_on; /* * If the LED #1 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led1_blink_off; /* * An identifier for the group of LEDs that LED #1 belongs * to. * If set to 0, then the LED #1 is not grouped. * For all other non-zero values of this field, LED #1 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led1_group_id; /* An identifier for the LED #2. */ uint8_t led2_id; /* The type of LED #2. */ uint8_t led2_type; /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID /* The current state of the LED #2. */ uint8_t led2_state; /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT /* The color of LED #2. */ uint8_t led2_color; /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER uint8_t unused_2; /* * If the LED #2 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led2_blink_on; /* * If the LED #2 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led2_blink_off; /* * An identifier for the group of LEDs that LED #2 belongs * to. * If set to 0, then the LED #2 is not grouped. * For all other non-zero values of this field, LED #2 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led2_group_id; /* An identifier for the LED #3. */ uint8_t led3_id; /* The type of LED #3. */ uint8_t led3_type; /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID /* The current state of the LED #3. */ uint8_t led3_state; /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4) #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT /* The color of LED #3. */ uint8_t led3_color; /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_LAST \ HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER uint8_t unused_3; /* * If the LED #3 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED on between cycles. */ uint16_t led3_blink_on; /* * If the LED #3 state is "blink" or "blinkalt", then * this field represents the requested time in milliseconds * to keep LED off between cycles. */ uint16_t led3_blink_off; /* * An identifier for the group of LEDs that LED #3 belongs * to. * If set to 0, then the LED #3 is not grouped. * For all other non-zero values of this field, LED #3 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led3_group_id; uint8_t unused_4[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_port_led_qcaps * ***********************/ /* hwrm_port_led_qcaps_input (size:192b/24B) */ struct hwrm_port_led_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Port ID of port whose LED configuration is being queried. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_port_led_qcaps_output (size:384b/48B) */ struct hwrm_port_led_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * The number of LEDs that are configured on this port. * Up to 4 LEDs can be returned in the response. */ uint8_t num_leds; /* Reserved for future use. */ uint8_t unused[3]; /* An identifier for the LED #0. */ uint8_t led0_id; /* The type of LED #0. */ uint8_t led0_type; /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_LAST \ HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID /* * An identifier for the group of LEDs that LED #0 belongs * to. * If set to 0, then the LED #0 cannot be grouped. * For all other non-zero values of this field, LED #0 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led0_group_id; uint8_t unused_0; /* The states supported by LED #0. */ uint16_t led0_state_caps; /* * If set to 1, this LED is enabled. * If set to 0, this LED is disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED \ UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. * If set to 0, off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. * If set to 0, on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. * If set to 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. * If set to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) /* The colors supported by LED #0. */ uint16_t led0_color_caps; /* reserved. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD \ UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. * If set to 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. * If set to 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) /* An identifier for the LED #1. */ uint8_t led1_id; /* The type of LED #1. */ uint8_t led1_type; /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_LAST \ HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID /* * An identifier for the group of LEDs that LED #1 belongs * to. * If set to 0, then the LED #0 cannot be grouped. * For all other non-zero values of this field, LED #0 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led1_group_id; uint8_t unused_1; /* The states supported by LED #1. */ uint16_t led1_state_caps; /* * If set to 1, this LED is enabled. * If set to 0, this LED is disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED \ UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. * If set to 0, off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. * If set to 0, on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. * If set to 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. * If set to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) /* The colors supported by LED #1. */ uint16_t led1_color_caps; /* reserved. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD \ UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. * If set to 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. * If set to 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) /* An identifier for the LED #2. */ uint8_t led2_id; /* The type of LED #2. */ uint8_t led2_type; /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_LAST \ HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID /* * An identifier for the group of LEDs that LED #0 belongs * to. * If set to 0, then the LED #0 cannot be grouped. * For all other non-zero values of this field, LED #0 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led2_group_id; uint8_t unused_2; /* The states supported by LED #2. */ uint16_t led2_state_caps; /* * If set to 1, this LED is enabled. * If set to 0, this LED is disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED \ UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. * If set to 0, off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. * If set to 0, on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. * If set to 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. * If set to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) /* The colors supported by LED #2. */ uint16_t led2_color_caps; /* reserved. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD \ UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. * If set to 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. * If set to 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) /* An identifier for the LED #3. */ uint8_t led3_id; /* The type of LED #3. */ uint8_t led3_type; /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_LAST \ HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID /* * An identifier for the group of LEDs that LED #3 belongs * to. * If set to 0, then the LED #0 cannot be grouped. * For all other non-zero values of this field, LED #0 is * grouped together with the LEDs with the same group ID * value. */ uint8_t led3_group_id; uint8_t unused_3; /* The states supported by LED #3. */ uint16_t led3_state_caps; /* * If set to 1, this LED is enabled. * If set to 0, this LED is disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED \ UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. * If set to 0, off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. * If set to 0, on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. * If set to 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. * If set to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) /* The colors supported by LED #3. */ uint16_t led3_color_caps; /* reserved. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD \ UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. * If set to 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. * If set to 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) uint8_t unused_4[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_queue_qportcfg * ***********************/ /* hwrm_queue_qportcfg_input (size:192b/24B) */ struct hwrm_queue_qportcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \ HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX /* * Port ID of port for which the queue configuration is being * queried. This field is only required when sent by IPC. */ uint16_t port_id; /* * Drivers will set this capability when it can use * queue_idx_service_profile to map the queues to application. */ uint8_t drv_qmap_cap; /* disabled */ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_DISABLED UINT32_C(0x0) /* enabled */ #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED UINT32_C(0x1) #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \ HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED uint8_t unused_0; } __attribute__((packed)); /* hwrm_queue_qportcfg_output (size:256b/32B) */ struct hwrm_queue_qportcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * The maximum number of queues that can be configured on this * port. * Valid values range from 1 through 8. */ uint8_t max_configurable_queues; /* * The maximum number of lossless queues that can be configured * on this port. * Valid values range from 0 through 8. */ uint8_t max_configurable_lossless_queues; /* * Bitmask indicating which queues can be configured by the * hwrm_queue_cfg command. * * Each bit represents a specific queue where bit 0 represents * queue 0 and bit 7 represents queue 7. * # A value of 0 indicates that the queue is not configurable * by the hwrm_queue_cfg command. * # A value of 1 indicates that the queue is configurable. * # A hwrm_queue_cfg command shall return error when trying to * configure a queue not configurable. */ uint8_t queue_cfg_allowed; /* Information about queue configuration. */ uint8_t queue_cfg_info; /* * If this flag is set to '1', then the queues are * configured asymmetrically on TX and RX sides. * If this flag is set to '0', then the queues are * configured symmetrically on TX and RX sides. For * symmetric configuration, the queue configuration * including queue ids and service profiles on the * TX side is the same as the corresponding queue * configuration on the RX side. */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ UINT32_C(0x1) /* * Bitmask indicating which queues can be configured by the * hwrm_queue_pfcenable_cfg command. * * Each bit represents a specific priority where bit 0 represents * priority 0 and bit 7 represents priority 7. * # A value of 0 indicates that the priority is not configurable by * the hwrm_queue_pfcenable_cfg command. * # A value of 1 indicates that the priority is configurable. * # A hwrm_queue_pfcenable_cfg command shall return error when * trying to configure a priority that is not configurable. */ uint8_t queue_pfcenable_cfg_allowed; /* * Bitmask indicating which queues can be configured by the * hwrm_queue_pri2cos_cfg command. * * Each bit represents a specific queue where bit 0 represents * queue 0 and bit 7 represents queue 7. * # A value of 0 indicates that the queue is not configurable * by the hwrm_queue_pri2cos_cfg command. * # A value of 1 indicates that the queue is configurable. * # A hwrm_queue_pri2cos_cfg command shall return error when * trying to configure a queue that is not configurable. */ uint8_t queue_pri2cos_cfg_allowed; /* * Bitmask indicating which queues can be configured by the * hwrm_queue_pri2cos_cfg command. * * Each bit represents a specific queue where bit 0 represents * queue 0 and bit 7 represents queue 7. * # A value of 0 indicates that the queue is not configurable * by the hwrm_queue_pri2cos_cfg command. * # A value of 1 indicates that the queue is configurable. * # A hwrm_queue_pri2cos_cfg command shall return error when * trying to configure a queue not configurable. */ uint8_t queue_cos2bw_cfg_allowed; /* * ID of CoS Queue 0. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id0; /* This value is applicable to CoS queues only. */ uint8_t queue_id0_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN /* * ID of CoS Queue 1. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id1; /* This value is applicable to CoS queues only. */ uint8_t queue_id1_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN /* * ID of CoS Queue 2. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id2; /* This value is applicable to CoS queues only. */ uint8_t queue_id2_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN /* * ID of CoS Queue 3. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id3; /* This value is applicable to CoS queues only. */ uint8_t queue_id3_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN /* * ID of CoS Queue 4. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id4; /* This value is applicable to CoS queues only. */ uint8_t queue_id4_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN /* * ID of CoS Queue 5. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id5; /* This value is applicable to CoS queues only. */ uint8_t queue_id5_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN /* * ID of CoS Queue 6. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id6; /* This value is applicable to CoS queues only. */ uint8_t queue_id6_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN /* * ID of CoS Queue 7. * FF - Invalid id * * # This ID can be used on any subsequent call to an hwrm command * that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. * # Any driver or software should not make any assumptions about * queue IDs. * # A value of 0xff indicates that the queue is not available. * # Available queues may not be in sequential order. */ uint8_t queue_id7; /* This value is applicable to CoS queues only. */ uint8_t queue_id7_service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* Lossless RoCE */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_ROCE \ UINT32_C(0x1) /* Lossy RoCE CNP */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY_ROCE_CNP \ UINT32_C(0x2) /* Lossless NIC */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_NIC \ UINT32_C(0x3) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************* * hwrm_queue_qcfg * *******************/ /* hwrm_queue_qcfg_input (size:192b/24B) */ struct hwrm_queue_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_LAST \ HWRM_QUEUE_QCFG_INPUT_FLAGS_PATH_RX /* Queue ID of the queue. */ uint32_t queue_id; } __attribute__((packed)); /* hwrm_queue_qcfg_output (size:128b/16B) */ struct hwrm_queue_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * This value is a the estimate packet length used in the * TX arbiter. */ uint32_t queue_len; /* This value is applicable to CoS queues only. */ uint8_t service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff) #define HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_LAST \ HWRM_QUEUE_QCFG_OUTPUT_SERVICE_PROFILE_UNKNOWN /* Information about queue configuration. */ uint8_t queue_cfg_info; /* * If this flag is set to '1', then the queue is * configured asymmetrically on TX and RX sides. * If this flag is set to '0', then this queue is * configured symmetrically on TX and RX sides. */ #define HWRM_QUEUE_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ UINT32_C(0x1) uint8_t unused_0; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************** * hwrm_queue_cfg * ******************/ /* hwrm_queue_cfg_input (size:320b/40B) */ struct hwrm_queue_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX, or both directions applicable to the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3) #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_SFT 0 /* tx path */ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) /* Bi-directional (Symmetrically applicable to TX and RX paths) */ #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2) #define HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_LAST \ HWRM_QUEUE_CFG_INPUT_FLAGS_PATH_BIDIR uint32_t enables; /* * This bit must be '1' for the dflt_len field to be * configured. */ #define HWRM_QUEUE_CFG_INPUT_ENABLES_DFLT_LEN UINT32_C(0x1) /* * This bit must be '1' for the service_profile field to be * configured. */ #define HWRM_QUEUE_CFG_INPUT_ENABLES_SERVICE_PROFILE UINT32_C(0x2) /* Queue ID of queue that is to be configured by this function. */ uint32_t queue_id; /* * This value is a the estimate packet length used in the * TX arbiter. * Set to 0xFF... (All Fs) to not adjust this value. */ uint32_t dflt_len; /* This value is applicable to CoS queues only. */ uint8_t service_profile; /* Lossy (best-effort) */ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSY UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LOSSLESS UINT32_C(0x1) /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN UINT32_C(0xff) #define HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_LAST \ HWRM_QUEUE_CFG_INPUT_SERVICE_PROFILE_UNKNOWN uint8_t unused_0[7]; } __attribute__((packed)); /* hwrm_queue_cfg_output (size:128b/16B) */ struct hwrm_queue_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************************** * hwrm_queue_pfcenable_qcfg * *****************************/ /* hwrm_queue_pfcenable_qcfg_input (size:192b/24B) */ struct hwrm_queue_pfcenable_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure pri2cos mapping on this port. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_queue_pfcenable_qcfg_output (size:128b/16B) */ struct hwrm_queue_pfcenable_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint32_t flags; /* If set to 1, then PFC is enabled on PRI 0. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI0_PFC_ENABLED \ UINT32_C(0x1) /* If set to 1, then PFC is enabled on PRI 1. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI1_PFC_ENABLED \ UINT32_C(0x2) /* If set to 1, then PFC is enabled on PRI 2. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI2_PFC_ENABLED \ UINT32_C(0x4) /* If set to 1, then PFC is enabled on PRI 3. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI3_PFC_ENABLED \ UINT32_C(0x8) /* If set to 1, then PFC is enabled on PRI 4. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI4_PFC_ENABLED \ UINT32_C(0x10) /* If set to 1, then PFC is enabled on PRI 5. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI5_PFC_ENABLED \ UINT32_C(0x20) /* If set to 1, then PFC is enabled on PRI 6. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI6_PFC_ENABLED \ UINT32_C(0x40) /* If set to 1, then PFC is enabled on PRI 7. */ #define HWRM_QUEUE_PFCENABLE_QCFG_OUTPUT_FLAGS_PRI7_PFC_ENABLED \ UINT32_C(0x80) uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /**************************** * hwrm_queue_pfcenable_cfg * ****************************/ /* hwrm_queue_pfcenable_cfg_input (size:192b/24B) */ struct hwrm_queue_pfcenable_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* If set to 1, then PFC is requested to be enabled on PRI 0. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI0_PFC_ENABLED \ UINT32_C(0x1) /* If set to 1, then PFC is requested to be enabled on PRI 1. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI1_PFC_ENABLED \ UINT32_C(0x2) /* If set to 1, then PFC is requested to be enabled on PRI 2. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI2_PFC_ENABLED \ UINT32_C(0x4) /* If set to 1, then PFC is requested to be enabled on PRI 3. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI3_PFC_ENABLED \ UINT32_C(0x8) /* If set to 1, then PFC is requested to be enabled on PRI 4. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI4_PFC_ENABLED \ UINT32_C(0x10) /* If set to 1, then PFC is requested to be enabled on PRI 5. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI5_PFC_ENABLED \ UINT32_C(0x20) /* If set to 1, then PFC is requested to be enabled on PRI 6. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI6_PFC_ENABLED \ UINT32_C(0x40) /* If set to 1, then PFC is requested to be enabled on PRI 7. */ #define HWRM_QUEUE_PFCENABLE_CFG_INPUT_FLAGS_PRI7_PFC_ENABLED \ UINT32_C(0x80) /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure pri2cos mapping on this port. */ uint16_t port_id; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_queue_pfcenable_cfg_output (size:128b/16B) */ struct hwrm_queue_pfcenable_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_queue_pri2cos_qcfg * ***************************/ /* hwrm_queue_pri2cos_qcfg_input (size:192b/24B) */ struct hwrm_queue_pri2cos_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_LAST \ HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_PATH_RX /* * When this bit is set to '0', the query is * for VLAN PRI field in tunnel headers. * When this bit is set to '1', the query is * for VLAN PRI field in inner packet headers. */ #define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN UINT32_C(0x2) /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure pri2cos mapping on this port. */ uint8_t port_id; uint8_t unused_0[3]; } __attribute__((packed)); /* hwrm_queue_pri2cos_qcfg_output (size:192b/24B) */ struct hwrm_queue_pri2cos_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * CoS Queue assigned to priority 0. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri0_cos_queue_id; /* * CoS Queue assigned to priority 1. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri1_cos_queue_id; /* * CoS Queue assigned to priority 2 This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri2_cos_queue_id; /* * CoS Queue assigned to priority 3. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri3_cos_queue_id; /* * CoS Queue assigned to priority 4. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri4_cos_queue_id; /* * CoS Queue assigned to priority 5. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri5_cos_queue_id; /* * CoS Queue assigned to priority 6. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri6_cos_queue_id; /* * CoS Queue assigned to priority 7. This value can only * be changed before traffic has started. * A value of 0xff indicates that no CoS queue is assigned to the * specified priority. */ uint8_t pri7_cos_queue_id; /* Information about queue configuration. */ uint8_t queue_cfg_info; /* * If this flag is set to '1', then the PRI to CoS * configuration is asymmetric on TX and RX sides. * If this flag is set to '0', then PRI to CoS configuration * is symmetric on TX and RX sides. */ #define HWRM_QUEUE_PRI2COS_QCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ UINT32_C(0x1) uint8_t unused_0[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_queue_pri2cos_cfg * **************************/ /* hwrm_queue_pri2cos_cfg_input (size:320b/40B) */ struct hwrm_queue_pri2cos_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX, or both directions applicable to the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_MASK UINT32_C(0x3) #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_SFT 0 /* tx path */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) /* Bi-directional (Symmetrically applicable to TX and RX paths) */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR UINT32_C(0x2) #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_LAST \ HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_PATH_BIDIR /* * When this bit is set to '0', the mapping is requested * for VLAN PRI field in tunnel headers. * When this bit is set to '1', the mapping is requested * for VLAN PRI field in inner packet headers. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_FLAGS_IVLAN UINT32_C(0x4) uint32_t enables; /* * This bit must be '1' for the pri0_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI0_COS_QUEUE_ID \ UINT32_C(0x1) /* * This bit must be '1' for the pri1_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI1_COS_QUEUE_ID \ UINT32_C(0x2) /* * This bit must be '1' for the pri2_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI2_COS_QUEUE_ID \ UINT32_C(0x4) /* * This bit must be '1' for the pri3_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI3_COS_QUEUE_ID \ UINT32_C(0x8) /* * This bit must be '1' for the pri4_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI4_COS_QUEUE_ID \ UINT32_C(0x10) /* * This bit must be '1' for the pri5_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI5_COS_QUEUE_ID \ UINT32_C(0x20) /* * This bit must be '1' for the pri6_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI6_COS_QUEUE_ID \ UINT32_C(0x40) /* * This bit must be '1' for the pri7_cos_queue_id field to be * configured. */ #define HWRM_QUEUE_PRI2COS_CFG_INPUT_ENABLES_PRI7_COS_QUEUE_ID \ UINT32_C(0x80) /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure pri2cos mapping on this port. */ uint8_t port_id; /* * CoS Queue assigned to priority 0. This value can only * be changed before traffic has started. */ uint8_t pri0_cos_queue_id; /* * CoS Queue assigned to priority 1. This value can only * be changed before traffic has started. */ uint8_t pri1_cos_queue_id; /* * CoS Queue assigned to priority 2 This value can only * be changed before traffic has started. */ uint8_t pri2_cos_queue_id; /* * CoS Queue assigned to priority 3. This value can only * be changed before traffic has started. */ uint8_t pri3_cos_queue_id; /* * CoS Queue assigned to priority 4. This value can only * be changed before traffic has started. */ uint8_t pri4_cos_queue_id; /* * CoS Queue assigned to priority 5. This value can only * be changed before traffic has started. */ uint8_t pri5_cos_queue_id; /* * CoS Queue assigned to priority 6. This value can only * be changed before traffic has started. */ uint8_t pri6_cos_queue_id; /* * CoS Queue assigned to priority 7. This value can only * be changed before traffic has started. */ uint8_t pri7_cos_queue_id; uint8_t unused_0[7]; } __attribute__((packed)); /* hwrm_queue_pri2cos_cfg_output (size:128b/16B) */ struct hwrm_queue_pri2cos_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_queue_cos2bw_qcfg * **************************/ /* hwrm_queue_cos2bw_qcfg_input (size:192b/24B) */ struct hwrm_queue_cos2bw_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure TC BW assignment on this port. */ uint16_t port_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_queue_cos2bw_qcfg_output (size:896b/112B) */ struct hwrm_queue_cos2bw_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* ID of CoS Queue 0. */ uint8_t queue_id0; uint8_t unused_0; uint16_t unused_1; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id0_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id0_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id0_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id0_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id0_bw_weight; /* ID of CoS Queue 1. */ uint8_t queue_id1; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id1_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id1_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id1_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id1_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id1_bw_weight; /* ID of CoS Queue 2. */ uint8_t queue_id2; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id2_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id2_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id2_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id2_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id2_bw_weight; /* ID of CoS Queue 3. */ uint8_t queue_id3; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id3_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id3_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id3_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id3_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id3_bw_weight; /* ID of CoS Queue 4. */ uint8_t queue_id4; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id4_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id4_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id4_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id4_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id4_bw_weight; /* ID of CoS Queue 5. */ uint8_t queue_id5; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id5_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id5_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id5_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id5_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id5_bw_weight; /* ID of CoS Queue 6. */ uint8_t queue_id6; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id6_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id6_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id6_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id6_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id6_bw_weight; /* ID of CoS Queue 7. */ uint8_t queue_id7; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id7_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id7_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id7_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_QCFG_OUTPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id7_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id7_bw_weight; uint8_t unused_2[4]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_queue_cos2bw_cfg * *************************/ /* hwrm_queue_cos2bw_cfg_input (size:1024b/128B) */ struct hwrm_queue_cos2bw_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; uint32_t enables; /* * If this bit is set to 1, then all queue_id0 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID0_VALID \ UINT32_C(0x1) /* * If this bit is set to 1, then all queue_id1 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID1_VALID \ UINT32_C(0x2) /* * If this bit is set to 1, then all queue_id2 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID2_VALID \ UINT32_C(0x4) /* * If this bit is set to 1, then all queue_id3 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID3_VALID \ UINT32_C(0x8) /* * If this bit is set to 1, then all queue_id4 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID4_VALID \ UINT32_C(0x10) /* * If this bit is set to 1, then all queue_id5 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID5_VALID \ UINT32_C(0x20) /* * If this bit is set to 1, then all queue_id6 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID6_VALID \ UINT32_C(0x40) /* * If this bit is set to 1, then all queue_id7 related * parameters in this command are valid. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_ENABLES_COS_QUEUE_ID7_VALID \ UINT32_C(0x80) /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure TC BW assignment on this port. */ uint16_t port_id; /* ID of CoS Queue 0. */ uint8_t queue_id0; uint8_t unused_0; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id0_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id0_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id0_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID0_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id0_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id0_bw_weight; /* ID of CoS Queue 1. */ uint8_t queue_id1; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id1_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id1_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id1_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID1_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id1_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id1_bw_weight; /* ID of CoS Queue 2. */ uint8_t queue_id2; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id2_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id2_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id2_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID2_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id2_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id2_bw_weight; /* ID of CoS Queue 3. */ uint8_t queue_id3; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id3_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id3_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id3_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID3_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id3_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id3_bw_weight; /* ID of CoS Queue 4. */ uint8_t queue_id4; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id4_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id4_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id4_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID4_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id4_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id4_bw_weight; /* ID of CoS Queue 5. */ uint8_t queue_id5; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id5_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id5_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id5_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID5_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id5_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id5_bw_weight; /* ID of CoS Queue 6. */ uint8_t queue_id6; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id6_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id6_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id6_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID6_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id6_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id6_bw_weight; /* ID of CoS Queue 7. */ uint8_t queue_id7; /* * Minimum BW allocated to CoS Queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id7_min_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MIN_BW_BW_VALUE_UNIT_INVALID /* * Maximum BW allocated to CoS queue. * The HWRM will translate this value into byte counter and * time interval used for this COS inside the device. */ uint32_t queue_id7_max_bw; /* The bandwidth value. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_MAX_BW_BW_VALUE_UNIT_INVALID /* Transmission Selection Algorithm (TSA) for CoS Queue. */ uint8_t queue_id7_tsa_assign; /* Strict Priority */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_SP \ UINT32_C(0x0) /* Enhanced Transmission Selection */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_ETS \ UINT32_C(0x1) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_FIRST \ UINT32_C(0x2) /* reserved. */ #define HWRM_QUEUE_COS2BW_CFG_INPUT_QUEUE_ID7_TSA_ASSIGN_RESERVED_LAST \ UINT32_C(0xff) /* * Priority level for strict priority. Valid only when the * tsa_assign is 0 - Strict Priority (SP) * 0..7 - Valid values. * 8..255 - Reserved. */ uint8_t queue_id7_pri_lvl; /* * Weight used to allocate remaining BW for this COS after * servicing guaranteed bandwidths for all COS. */ uint8_t queue_id7_bw_weight; uint8_t unused_1[5]; } __attribute__((packed)); /* hwrm_queue_cos2bw_cfg_output (size:128b/16B) */ struct hwrm_queue_cos2bw_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_queue_dscp_qcaps * *************************/ /* hwrm_queue_dscp_qcaps_input (size:192b/24B) */ struct hwrm_queue_dscp_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure pri2cos mapping on this port. */ uint8_t port_id; uint8_t unused_0[7]; } __attribute__((packed)); /* hwrm_queue_dscp_qcaps_output (size:128b/16B) */ struct hwrm_queue_dscp_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* The number of bits provided by the hardware for the DSCP value. */ uint8_t num_dscp_bits; uint8_t unused_0; /* Max number of DSCP-MASK-PRI entries supported. */ uint16_t max_entries; uint8_t unused_1[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /**************************** * hwrm_queue_dscp2pri_qcfg * ****************************/ /* hwrm_queue_dscp2pri_qcfg_input (size:256b/32B) */ struct hwrm_queue_dscp2pri_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This is the host address where the 24-bits DSCP-MASK-PRI * tuple(s) will be copied to. */ uint64_t dest_data_addr; /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure pri2cos mapping on this port. */ uint8_t port_id; uint8_t unused_0; /* Size of the buffer pointed to by dest_data_addr. */ uint16_t dest_data_buffer_size; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_queue_dscp2pri_qcfg_output (size:128b/16B) */ struct hwrm_queue_dscp2pri_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * A count of the number of DSCP-MASK-PRI tuple(s) pointed to * by the dest_data_addr. */ uint16_t entry_cnt; /* * This is the default PRI which un-initialized DSCP values are * mapped to. */ uint8_t default_pri; uint8_t unused_0[4]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_queue_dscp2pri_cfg * ***************************/ /* hwrm_queue_dscp2pri_cfg_input (size:320b/40B) */ struct hwrm_queue_dscp2pri_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This is the host address where the 24-bits DSCP-MASK-PRI tuple * will be copied from. */ uint64_t src_data_addr; uint32_t flags; /* use_hw_default_pri is 1 b */ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_FLAGS_USE_HW_DEFAULT_PRI \ UINT32_C(0x1) uint32_t enables; /* * This bit must be '1' for the default_pri field to be * configured. */ #define HWRM_QUEUE_DSCP2PRI_CFG_INPUT_ENABLES_DEFAULT_PRI \ UINT32_C(0x1) /* * Port ID of port for which the table is being configured. * The HWRM needs to check whether this function is allowed * to configure pri2cos mapping on this port. */ uint8_t port_id; /* * This is the default PRI which un-initialized DSCP values will be * mapped to. */ uint8_t default_pri; /* * A count of the number of DSCP-MASK-PRI tuple(s) in the data pointed * to by src_data_addr. */ uint16_t entry_cnt; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_queue_dscp2pri_cfg_output (size:128b/16B) */ struct hwrm_queue_dscp2pri_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************* * hwrm_vnic_alloc * *******************/ /* hwrm_vnic_alloc_input (size:192b/24B) */ struct hwrm_vnic_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When this bit is '1', this VNIC is requested to * be the default VNIC for this function. */ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1) uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_vnic_alloc_output (size:128b/16B) */ struct hwrm_vnic_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Logical vnic ID */ uint32_t vnic_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************** * hwrm_vnic_free * ******************/ /* hwrm_vnic_free_input (size:192b/24B) */ struct hwrm_vnic_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Logical vnic ID */ uint32_t vnic_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_vnic_free_output (size:128b/16B) */ struct hwrm_vnic_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************** * hwrm_vnic_cfg * *****************/ /* hwrm_vnic_cfg_input (size:320b/40B) */ struct hwrm_vnic_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When this bit is '1', the VNIC is requested to * be the default VNIC for the function. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT \ UINT32_C(0x1) /* * When this bit is '1', the VNIC is being configured to * strip VLAN in the RX path. * If set to '0', then VLAN stripping is disabled on * this VNIC. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE \ UINT32_C(0x2) /* * When this bit is '1', the VNIC is being configured to * buffer receive packets in the hardware until the host * posts new receive buffers. * If set to '0', then bd_stall is being configured to be * disabled on this VNIC. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE \ UINT32_C(0x4) /* * When this bit is '1', the VNIC is being configured to * receive both RoCE and non-RoCE traffic. * If set to '0', then this VNIC is not configured to be * operating in dual VNIC mode. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE \ UINT32_C(0x8) /* * When this flag is set to '1', the VNIC is requested to * be configured to receive only RoCE traffic. * If this flag is set to '0', then this flag shall be * ignored by the HWRM. * If roce_dual_vnic_mode flag is set to '1' * or roce_mirroring_capable_vnic_mode flag to 1, * then the HWRM client shall not set this flag to '1'. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE \ UINT32_C(0x10) /* * When a VNIC uses one destination ring group for certain * application (e.g. Receive Flow Steering) where * exact match is used to direct packets to a VNIC with one * destination ring group only, there is no need to configure * RSS indirection table for that VNIC as only one destination * ring group is used. * * This flag is used to enable a mode where * RSS is enabled in the VNIC using a RSS context * for computing RSS hash but the RSS indirection table is * not configured using hwrm_vnic_rss_cfg. * * If this mode is enabled, then the driver should not program * RSS indirection table for the RSS context that is used for * computing RSS hash only. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE \ UINT32_C(0x20) /* * When this bit is '1', the VNIC is being configured to * receive both RoCE and non-RoCE traffic, but forward only the * RoCE traffic further. Also, RoCE traffic can be mirrored to * L2 driver. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ UINT32_C(0x40) uint32_t enables; /* * This bit must be '1' for the dflt_ring_grp field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP \ UINT32_C(0x1) /* * This bit must be '1' for the rss_rule field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE \ UINT32_C(0x2) /* * This bit must be '1' for the cos_rule field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE \ UINT32_C(0x4) /* * This bit must be '1' for the lb_rule field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE \ UINT32_C(0x8) /* * This bit must be '1' for the mru field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU \ UINT32_C(0x10) /* * This bit must be '1' for the default_rx_ring_id field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_RX_RING_ID \ UINT32_C(0x20) /* * This bit must be '1' for the default_cmpl_ring_id field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_DEFAULT_CMPL_RING_ID \ UINT32_C(0x40) /* Logical vnic ID */ uint16_t vnic_id; /* * Default Completion ring for the VNIC. This ring will * be chosen if packet does not match any RSS rules and if * there is no COS rule. */ uint16_t dflt_ring_grp; /* * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if * there is no RSS rule. */ uint16_t rss_rule; /* * RSS ID for COS rule/table structure. 0xFF... (All Fs) if * there is no COS rule. */ uint16_t cos_rule; /* * RSS ID for load balancing rule/table structure. * 0xFF... (All Fs) if there is no LB rule. */ uint16_t lb_rule; /* * The maximum receive unit of the vnic. * Each vnic is associated with a function. * The vnic mru value overwrites the mru setting of the * associated function. * The HWRM shall make sure that vnic mru does not exceed * the mru of the port the function is associated with. */ uint16_t mru; /* * Default Rx ring for the VNIC. This ring will * be chosen if packet does not match any RSS rules. * The aggregation ring associated with the Rx ring is * implied based on the Rx ring specified when the * aggregation ring was allocated. */ uint16_t default_rx_ring_id; /* * Default completion ring for the VNIC. This ring will * be chosen if packet does not match any RSS rules. */ uint16_t default_cmpl_ring_id; } __attribute__((packed)); /* hwrm_vnic_cfg_output (size:128b/16B) */ struct hwrm_vnic_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************** * hwrm_vnic_qcfg * ******************/ /* hwrm_vnic_qcfg_input (size:256b/32B) */ struct hwrm_vnic_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the vf_id_valid field to be * configured. */ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) /* Logical vnic ID */ uint32_t vnic_id; /* ID of Virtual Function whose VNIC resource is being queried. */ uint16_t vf_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_vnic_qcfg_output (size:256b/32B) */ struct hwrm_vnic_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Default Completion ring for the VNIC. */ uint16_t dflt_ring_grp; /* * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if * there is no RSS rule. */ uint16_t rss_rule; /* * RSS ID for COS rule/table structure. 0xFF... (All Fs) if * there is no COS rule. */ uint16_t cos_rule; /* * RSS ID for load balancing rule/table structure. * 0xFF... (All Fs) if there is no LB rule. */ uint16_t lb_rule; /* The maximum receive unit of the vnic. */ uint16_t mru; uint8_t unused_0[2]; uint32_t flags; /* * When this bit is '1', the VNIC is the default VNIC for * the function. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT \ UINT32_C(0x1) /* * When this bit is '1', the VNIC is configured to * strip VLAN in the RX path. * If set to '0', then VLAN stripping is disabled on * this VNIC. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE \ UINT32_C(0x2) /* * When this bit is '1', the VNIC is configured to * buffer receive packets in the hardware until the host * posts new receive buffers. * If set to '0', then bd_stall is disabled on * this VNIC. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE \ UINT32_C(0x4) /* * When this bit is '1', the VNIC is configured to * receive both RoCE and non-RoCE traffic. * If set to '0', then this VNIC is not configured to * operate in dual VNIC mode. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE \ UINT32_C(0x8) /* * When this flag is set to '1', the VNIC is configured to * receive only RoCE traffic. * When this flag is set to '0', the VNIC is not configured * to receive only RoCE traffic. * If roce_dual_vnic_mode flag and this flag both are set * to '1', then it is an invalid configuration of the * VNIC. The HWRM should not allow that type of * mis-configuration by HWRM clients. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE \ UINT32_C(0x10) /* * When a VNIC uses one destination ring group for certain * application (e.g. Receive Flow Steering) where * exact match is used to direct packets to a VNIC with one * destination ring group only, there is no need to configure * RSS indirection table for that VNIC as only one destination * ring group is used. * * When this bit is set to '1', then the VNIC is enabled in a * mode where RSS is enabled in the VNIC using a RSS context * for computing RSS hash but the RSS indirection table is * not configured. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE \ UINT32_C(0x20) /* * When this bit is '1', the VNIC is configured to * receive both RoCE and non-RoCE traffic, but forward only * RoCE traffic further. Also RoCE traffic can be mirrored to * L2 driver. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ UINT32_C(0x40) uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************* * hwrm_vnic_qcaps * *******************/ /* hwrm_vnic_qcaps_input (size:192b/24B) */ struct hwrm_vnic_qcaps_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_vnic_qcaps_output (size:192b/24B) */ struct hwrm_vnic_qcaps_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* The maximum receive unit that is settable on a vnic. */ uint16_t mru; uint8_t unused_0[2]; uint32_t flags; /* Unused. */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_UNUSED \ UINT32_C(0x1) /* * When this bit is '1', the capability of stripping VLAN in * the RX path is supported on VNIC(s). * If set to '0', then VLAN stripping capability is * not supported on VNIC(s). */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_VLAN_STRIP_CAP \ UINT32_C(0x2) /* * When this bit is '1', the capability to buffer receive * packets in the hardware until the host posts new receive buffers * is supported on VNIC(s). * If set to '0', then bd_stall capability is not supported * on VNIC(s). */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_BD_STALL_CAP \ UINT32_C(0x4) /* * When this bit is '1', the capability to * receive both RoCE and non-RoCE traffic on VNIC(s) is * supported. * If set to '0', then the capability to receive * both RoCE and non-RoCE traffic on VNIC(s) is * not supported. */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_DUAL_VNIC_CAP \ UINT32_C(0x8) /* * When this bit is set to '1', the capability to configure * a VNIC to receive only RoCE traffic is supported. * When this flag is set to '0', the VNIC capability to * configure to receive only RoCE traffic is not supported. */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_ONLY_VNIC_CAP \ UINT32_C(0x10) /* * When this bit is set to '1', then the capability to enable * a VNIC in a mode where RSS context without configuring * RSS indirection table is supported (for RSS hash computation). * When this bit is set to '0', then a VNIC can not be configured * with a mode to enable RSS context without configuring RSS * indirection table. */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_RSS_DFLT_CR_CAP \ UINT32_C(0x20) /* * When this bit is '1', the capability to * mirror the the RoCE traffic is supported. * If set to '0', then the capability to mirror the * RoCE traffic is not supported. */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_CAP \ UINT32_C(0x40) /* * When this bit is '1', the outermost RSS hashing capability * is supported. If set to '0', then the outermost RSS hashing * capability is not supported. */ #define HWRM_VNIC_QCAPS_OUTPUT_FLAGS_OUTERMOST_RSS_CAP \ UINT32_C(0x80) uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_vnic_tpa_cfg * *********************/ /* hwrm_vnic_tpa_cfg_input (size:320b/40B) */ struct hwrm_vnic_tpa_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When this bit is '1', the VNIC shall be configured to * perform transparent packet aggregation (TPA) of * non-tunneled TCP packets. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA \ UINT32_C(0x1) /* * When this bit is '1', the VNIC shall be configured to * perform transparent packet aggregation (TPA) of * tunneled TCP packets. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA \ UINT32_C(0x2) /* * When this bit is '1', the VNIC shall be configured to * perform transparent packet aggregation (TPA) according * to Windows Receive Segment Coalescing (RSC) rules. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE \ UINT32_C(0x4) /* * When this bit is '1', the VNIC shall be configured to * perform transparent packet aggregation (TPA) according * to Linux Generic Receive Offload (GRO) rules. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO \ UINT32_C(0x8) /* * When this bit is '1', the VNIC shall be configured to * perform transparent packet aggregation (TPA) for TCP * packets with IP ECN set to non-zero. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN \ UINT32_C(0x10) /* * When this bit is '1', the VNIC shall be configured to * perform transparent packet aggregation (TPA) for * GRE tunneled TCP packets only if all packets have the * same GRE sequence. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \ UINT32_C(0x20) /* * When this bit is '1' and the GRO mode is enabled, * the VNIC shall be configured to * perform transparent packet aggregation (TPA) for * TCP/IPv4 packets with consecutively increasing IPIDs. * In other words, the last packet that is being * aggregated to an already existing aggregation context * shall have IPID 1 more than the IPID of the last packet * that was aggregated in that aggregation context. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK \ UINT32_C(0x40) /* * When this bit is '1' and the GRO mode is enabled, * the VNIC shall be configured to * perform transparent packet aggregation (TPA) for * TCP packets with the same TTL (IPv4) or Hop limit (IPv6) * value. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK \ UINT32_C(0x80) uint32_t enables; /* * This bit must be '1' for the max_agg_segs field to be * configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1) /* * This bit must be '1' for the max_aggs field to be * configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2) /* * This bit must be '1' for the max_agg_timer field to be * configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4) /* * This bit must be '1' for the min_agg_len field to be * configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8) /* Logical vnic ID */ uint16_t vnic_id; /* * This is the maximum number of TCP segments that can * be aggregated (unit is Log2). Max value is 31. */ uint16_t max_agg_segs; /* 1 segment */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0) /* 2 segments */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1) /* 4 segments */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2) /* 8 segments */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3) /* Any segment size larger than this is not valid */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f) #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_LAST \ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX /* * This is the maximum number of aggregations this VNIC is * allowed (unit is Log2). Max value is 7 */ uint16_t max_aggs; /* 1 aggregation */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0) /* 2 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1) /* 4 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2) /* 8 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3) /* 16 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4) /* Any aggregation size larger than this is not valid */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7) #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_LAST \ HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX uint8_t unused_0[2]; /* * This is the maximum amount of time allowed for * an aggregation context to complete after it was initiated. */ uint32_t max_agg_timer; /* * This is the minimum amount of payload length required to * start an aggregation context. */ uint32_t min_agg_len; } __attribute__((packed)); /* hwrm_vnic_tpa_cfg_output (size:128b/16B) */ struct hwrm_vnic_tpa_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_vnic_tpa_qcfg * **********************/ /* hwrm_vnic_tpa_qcfg_input (size:192b/24B) */ struct hwrm_vnic_tpa_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Logical vnic ID */ uint16_t vnic_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_vnic_tpa_qcfg_output (size:256b/32B) */ struct hwrm_vnic_tpa_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint32_t flags; /* * When this bit is '1', the VNIC is configured to * perform transparent packet aggregation (TPA) of * non-tunneled TCP packets. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_TPA \ UINT32_C(0x1) /* * When this bit is '1', the VNIC is configured to * perform transparent packet aggregation (TPA) of * tunneled TCP packets. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_ENCAP_TPA \ UINT32_C(0x2) /* * When this bit is '1', the VNIC is configured to * perform transparent packet aggregation (TPA) according * to Windows Receive Segment Coalescing (RSC) rules. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_RSC_WND_UPDATE \ UINT32_C(0x4) /* * When this bit is '1', the VNIC is configured to * perform transparent packet aggregation (TPA) according * to Linux Generic Receive Offload (GRO) rules. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO \ UINT32_C(0x8) /* * When this bit is '1', the VNIC is configured to * perform transparent packet aggregation (TPA) for TCP * packets with IP ECN set to non-zero. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_AGG_WITH_ECN \ UINT32_C(0x10) /* * When this bit is '1', the VNIC is configured to * perform transparent packet aggregation (TPA) for * GRE tunneled TCP packets only if all packets have the * same GRE sequence. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \ UINT32_C(0x20) /* * When this bit is '1' and the GRO mode is enabled, * the VNIC is configured to * perform transparent packet aggregation (TPA) for * TCP/IPv4 packets with consecutively increasing IPIDs. * In other words, the last packet that is being * aggregated to an already existing aggregation context * shall have IPID 1 more than the IPID of the last packet * that was aggregated in that aggregation context. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO_IPID_CHECK \ UINT32_C(0x40) /* * When this bit is '1' and the GRO mode is enabled, * the VNIC is configured to * perform transparent packet aggregation (TPA) for * TCP packets with the same TTL (IPv4) or Hop limit (IPv6) * value. */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_FLAGS_GRO_TTL_CHECK \ UINT32_C(0x80) /* * This is the maximum number of TCP segments that can * be aggregated (unit is Log2). Max value is 31. */ uint16_t max_agg_segs; /* 1 segment */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_1 UINT32_C(0x0) /* 2 segments */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_2 UINT32_C(0x1) /* 4 segments */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_4 UINT32_C(0x2) /* 8 segments */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_8 UINT32_C(0x3) /* Any segment size larger than this is not valid */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f) #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_LAST \ HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGG_SEGS_MAX /* * This is the maximum number of aggregations this VNIC is * allowed (unit is Log2). Max value is 7 */ uint16_t max_aggs; /* 1 aggregation */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_1 UINT32_C(0x0) /* 2 aggregations */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_2 UINT32_C(0x1) /* 4 aggregations */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_4 UINT32_C(0x2) /* 8 aggregations */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_8 UINT32_C(0x3) /* 16 aggregations */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_16 UINT32_C(0x4) /* Any aggregation size larger than this is not valid */ #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_MAX UINT32_C(0x7) #define HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_LAST \ HWRM_VNIC_TPA_QCFG_OUTPUT_MAX_AGGS_MAX /* * This is the maximum amount of time allowed for * an aggregation context to complete after it was initiated. */ uint32_t max_agg_timer; /* * This is the minimum amount of payload length required to * start an aggregation context. */ uint32_t min_agg_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_vnic_rss_cfg * *********************/ /* hwrm_vnic_rss_cfg_input (size:384b/48B) */ struct hwrm_vnic_rss_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t hash_type; /* * When this bit is '1', the RSS hash shall be computed * over source and destination IPv4 addresses of IPv4 * packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv4 addresses and * source/destination ports of TCP/IPv4 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv4 addresses and * source/destination ports of UDP/IPv4 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4) /* * When this bit is '1', the RSS hash shall be computed * over source and destination IPv4 addresses of IPv6 * packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv6 addresses and * source/destination ports of TCP/IPv6 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv6 addresses and * source/destination ports of UDP/IPv6 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20) /* VNIC ID of VNIC associated with RSS table being configured. */ uint16_t vnic_id; /* * Specifies which VNIC ring table pair to configure. * Valid values range from 0 to 7. */ uint8_t ring_table_pair_index; /* Flags to specify different RSS hash modes. */ uint8_t hash_mode_flags; /* * When this bit is '1', it indicates using current RSS * hash mode setting configured in the device. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT \ UINT32_C(0x1) /* * When this bit is '1', it indicates requesting support of * RSS hashing over innermost 4 tuples {l3.src, l3.dest, * l4.src, l4.dest} for tunnel packets. For none-tunnel * packets, the RSS hash is computed over the normal * src/dest l3 and src/dest l4 headers. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_4 \ UINT32_C(0x2) /* * When this bit is '1', it indicates requesting support of * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for * tunnel packets. For none-tunnel packets, the RSS hash is * computed over the normal src/dest l3 headers. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_INNERMOST_2 \ UINT32_C(0x4) /* * When this bit is '1', it indicates requesting support of * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest, * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel * packets, the RSS hash is computed over the normal * src/dest l3 and src/dest l4 headers. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_4 \ UINT32_C(0x8) /* * When this bit is '1', it indicates requesting support of * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for * tunnel packets. For none-tunnel packets, the RSS hash is * computed over the normal src/dest l3 headers. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_OUTERMOST_2 \ UINT32_C(0x10) /* This is the address for rss ring group table */ uint64_t ring_grp_tbl_addr; /* This is the address for rss hash key table */ uint64_t hash_key_tbl_addr; /* Index to the rss indirection table. */ uint16_t rss_ctx_idx; uint8_t unused_1[6]; } __attribute__((packed)); /* hwrm_vnic_rss_cfg_output (size:128b/16B) */ struct hwrm_vnic_rss_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_vnic_rss_qcfg * **********************/ /* hwrm_vnic_rss_qcfg_input (size:192b/24B) */ struct hwrm_vnic_rss_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Index to the rss indirection table. */ uint16_t rss_ctx_idx; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_vnic_rss_qcfg_output (size:512b/64B) */ struct hwrm_vnic_rss_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint32_t hash_type; /* * When this bit is '1', the RSS hash shall be computed * over source and destination IPv4 addresses of IPv4 * packets. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV4 UINT32_C(0x1) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv4 addresses and * source/destination ports of TCP/IPv4 packets. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv4 addresses and * source/destination ports of UDP/IPv4 packets. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4) /* * When this bit is '1', the RSS hash shall be computed * over source and destination IPv4 addresses of IPv6 * packets. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_IPV6 UINT32_C(0x8) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv6 addresses and * source/destination ports of TCP/IPv6 packets. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10) /* * When this bit is '1', the RSS hash shall be computed * over source/destination IPv6 addresses and * source/destination ports of UDP/IPv6 packets. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20) uint8_t unused_0[4]; /* This is the value of rss hash key */ uint32_t hash_key[10]; /* Flags to specify different RSS hash modes. */ uint8_t hash_mode_flags; /* * When this bit is '1', it indicates using current RSS * hash mode setting configured in the device. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_DEFAULT \ UINT32_C(0x1) /* * When this bit is '1', it indicates requesting support of * RSS hashing over innermost 4 tuples {l3.src, l3.dest, * l4.src, l4.dest} for tunnel packets. For none-tunnel * packets, the RSS hash is computed over the normal * src/dest l3 and src/dest l4 headers. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_4 \ UINT32_C(0x2) /* * When this bit is '1', it indicates requesting support of * RSS hashing over innermost 2 tuples {l3.src, l3.dest} for * tunnel packets. For none-tunnel packets, the RSS hash is * computed over the normal src/dest l3 headers. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_INNERMOST_2 \ UINT32_C(0x4) /* * When this bit is '1', it indicates requesting support of * RSS hashing over outermost 4 tuples {t_l3.src, t_l3.dest, * t_l4.src, t_l4.dest} for tunnel packets. For none-tunnel * packets, the RSS hash is computed over the normal * src/dest l3 and src/dest l4 headers. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_4 \ UINT32_C(0x8) /* * When this bit is '1', it indicates requesting support of * RSS hashing over outermost 2 tuples {t_l3.src, t_l3.dest} for * tunnel packets. For none-tunnel packets, the RSS hash is * computed over the normal src/dest l3 headers. */ #define HWRM_VNIC_RSS_QCFG_OUTPUT_HASH_MODE_FLAGS_OUTERMOST_2 \ UINT32_C(0x10) uint8_t unused_1[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_vnic_plcmodes_cfg * **************************/ /* hwrm_vnic_plcmodes_cfg_input (size:320b/40B) */ struct hwrm_vnic_plcmodes_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * When this bit is '1', the VNIC shall be configured to * use regular placement algorithm. * By default, the regular placement algorithm shall be * enabled on the VNIC. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \ UINT32_C(0x1) /* * When this bit is '1', the VNIC shall be configured * use the jumbo placement algorithm. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \ UINT32_C(0x2) /* * When this bit is '1', the VNIC shall be configured * to enable Header-Data split for IPv4 packets according * to the following rules: * # If the packet is identified as TCP/IPv4, then the * packet is split at the beginning of the TCP payload. * # If the packet is identified as UDP/IPv4, then the * packet is split at the beginning of UDP payload. * # If the packet is identified as non-TCP and non-UDP * IPv4 packet, then the packet is split at the beginning * of the upper layer protocol header carried in the IPv4 * packet. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 \ UINT32_C(0x4) /* * When this bit is '1', the VNIC shall be configured * to enable Header-Data split for IPv6 packets according * to the following rules: * # If the packet is identified as TCP/IPv6, then the * packet is split at the beginning of the TCP payload. * # If the packet is identified as UDP/IPv6, then the * packet is split at the beginning of UDP payload. * # If the packet is identified as non-TCP and non-UDP * IPv6 packet, then the packet is split at the beginning * of the upper layer protocol header carried in the IPv6 * packet. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 \ UINT32_C(0x8) /* * When this bit is '1', the VNIC shall be configured * to enable Header-Data split for FCoE packets at the * beginning of FC payload. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE \ UINT32_C(0x10) /* * When this bit is '1', the VNIC shall be configured * to enable Header-Data split for RoCE packets at the * beginning of RoCE payload (after BTH/GRH headers). */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE \ UINT32_C(0x20) uint32_t enables; /* * This bit must be '1' for the jumbo_thresh_valid field to be * configured. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \ UINT32_C(0x1) /* * This bit must be '1' for the hds_offset_valid field to be * configured. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \ UINT32_C(0x2) /* * This bit must be '1' for the hds_threshold_valid field to be * configured. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \ UINT32_C(0x4) /* Logical vnic ID */ uint32_t vnic_id; /* * When jumbo placement algorithm is enabled, this value * is used to determine the threshold for jumbo placement. * Packets with length larger than this value will be * placed according to the jumbo placement algorithm. */ uint16_t jumbo_thresh; /* * This value is used to determine the offset into * packet buffer where the split data (payload) will be * placed according to one of of HDS placement algorithm. * * The lengths of packet buffers provided for split data * shall be larger than this value. */ uint16_t hds_offset; /* * When one of the HDS placement algorithm is enabled, this * value is used to determine the threshold for HDS * placement. * Packets with length larger than this value will be * placed according to the HDS placement algorithm. * This value shall be in multiple of 4 bytes. */ uint16_t hds_threshold; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_vnic_plcmodes_cfg_output (size:128b/16B) */ struct hwrm_vnic_plcmodes_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_vnic_plcmodes_qcfg * ***************************/ /* hwrm_vnic_plcmodes_qcfg_input (size:192b/24B) */ struct hwrm_vnic_plcmodes_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Logical vnic ID */ uint32_t vnic_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_vnic_plcmodes_qcfg_output (size:192b/24B) */ struct hwrm_vnic_plcmodes_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint32_t flags; /* * When this bit is '1', the VNIC is configured to * use regular placement algorithm. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \ UINT32_C(0x1) /* * When this bit is '1', the VNIC is configured to * use the jumbo placement algorithm. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \ UINT32_C(0x2) /* * When this bit is '1', the VNIC is configured * to enable Header-Data split for IPv4 packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 \ UINT32_C(0x4) /* * When this bit is '1', the VNIC is configured * to enable Header-Data split for IPv6 packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 \ UINT32_C(0x8) /* * When this bit is '1', the VNIC is configured * to enable Header-Data split for FCoE packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE \ UINT32_C(0x10) /* * When this bit is '1', the VNIC is configured * to enable Header-Data split for RoCE packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE \ UINT32_C(0x20) /* * When this bit is '1', the VNIC is configured * to be the default VNIC of the requesting function. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC \ UINT32_C(0x40) /* * When jumbo placement algorithm is enabled, this value * is used to determine the threshold for jumbo placement. * Packets with length larger than this value will be * placed according to the jumbo placement algorithm. */ uint16_t jumbo_thresh; /* * This value is used to determine the offset into * packet buffer where the split data (payload) will be * placed according to one of of HDS placement algorithm. * * The lengths of packet buffers provided for split data * shall be larger than this value. */ uint16_t hds_offset; /* * When one of the HDS placement algorithm is enabled, this * value is used to determine the threshold for HDS * placement. * Packets with length larger than this value will be * placed according to the HDS placement algorithm. * This value shall be in multiple of 4 bytes. */ uint16_t hds_threshold; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************************** * hwrm_vnic_rss_cos_lb_ctx_alloc * **********************************/ /* hwrm_vnic_rss_cos_lb_ctx_alloc_input (size:128b/16B) */ struct hwrm_vnic_rss_cos_lb_ctx_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_vnic_rss_cos_lb_ctx_alloc_output (size:128b/16B) */ struct hwrm_vnic_rss_cos_lb_ctx_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* rss_cos_lb_ctx_id is 16 b */ uint16_t rss_cos_lb_ctx_id; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************************* * hwrm_vnic_rss_cos_lb_ctx_free * *********************************/ /* hwrm_vnic_rss_cos_lb_ctx_free_input (size:192b/24B) */ struct hwrm_vnic_rss_cos_lb_ctx_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* rss_cos_lb_ctx_id is 16 b */ uint16_t rss_cos_lb_ctx_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_vnic_rss_cos_lb_ctx_free_output (size:128b/16B) */ struct hwrm_vnic_rss_cos_lb_ctx_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************* * hwrm_ring_alloc * *******************/ /* hwrm_ring_alloc_input (size:640b/80B) */ struct hwrm_ring_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the ring_arb_cfg field to be * configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG \ UINT32_C(0x2) /* * This bit must be '1' for the stat_ctx_id_valid field to be * configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID \ UINT32_C(0x8) /* * This bit must be '1' for the max_bw_valid field to be * configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID \ UINT32_C(0x20) /* * This bit must be '1' for the rx_ring_id field to be * configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_RING_ID_VALID \ UINT32_C(0x40) /* * This bit must be '1' for the nq_ring_id field to be * configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_NQ_RING_ID_VALID \ UINT32_C(0x80) /* * This bit must be '1' for the rx_buf_size field to be * configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_RX_BUF_SIZE_VALID \ UINT32_C(0x100) /* Ring Type. */ uint8_t ring_type; /* L2 Completion Ring (CR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) /* TX Ring (TR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1) /* RX Ring (RR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2) /* RoCE Notification Completion Ring (ROCE_CR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) /* RX Aggregation Ring */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4) /* Notification Queue */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ UINT32_C(0x5) #define HWRM_RING_ALLOC_INPUT_RING_TYPE_LAST \ HWRM_RING_ALLOC_INPUT_RING_TYPE_NQ uint8_t unused_0[3]; /* * This value is a pointer to the page table for the * Ring. */ uint64_t page_tbl_addr; /* First Byte Offset of the first entry in the first page. */ uint32_t fbo; /* * Actual page size in 2^page_size. The supported range is increments * in powers of 2 from 16 bytes to 1GB. * - 4 = 16 B * Page size is 16 B. * - 12 = 4 KB * Page size is 4 KB. * - 13 = 8 KB * Page size is 8 KB. * - 16 = 64 KB * Page size is 64 KB. * - 21 = 2 MB * Page size is 2 MB. * - 22 = 4 MB * Page size is 4 MB. * - 30 = 1 GB * Page size is 1 GB. */ uint8_t page_size; /* * This value indicates the depth of page table. * For this version of the specification, value other than 0 or * 1 shall be considered as an invalid value. * When the page_tbl_depth = 0, then it is treated as a * special case with the following. * 1. FBO and page size fields are not valid. * 2. page_tbl_addr is the physical address of the first * element of the ring. */ uint8_t page_tbl_depth; uint8_t unused_1[2]; /* * Number of 16B units in the ring. Minimum size for * a ring is 16 16B entries. */ uint32_t length; /* * Logical ring number for the ring to be allocated. * This value determines the position in the doorbell * area where the update to the ring will be made. * * For completion rings, this value is also the MSI-X * vector number for the function the completion ring is * associated with. */ uint16_t logical_id; /* * This field is used only when ring_type is a TX ring. * This value indicates what completion ring the TX ring * is associated with. */ uint16_t cmpl_ring_id; /* * This field is used only when ring_type is a TX ring. * This value indicates what CoS queue the TX ring * is associated with. */ uint16_t queue_id; /* * When allocating a Rx ring or Rx aggregation ring, this field * specifies the size of the buffer descriptors posted to the ring. */ uint16_t rx_buf_size; /* * When allocating an Rx aggregation ring, this field * specifies the associated Rx ring ID. */ uint16_t rx_ring_id; /* * When allocating a completion ring, this field * specifies the associated NQ ring ID. */ uint16_t nq_ring_id; /* * This field is used only when ring_type is a TX ring. * This field is used to configure arbitration related * parameters for a TX ring. */ uint16_t ring_arb_cfg; /* Arbitration policy used for the ring. */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \ UINT32_C(0xf) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0 /* * Use strict priority for the TX ring. * Priority value is specified in arb_policy_param */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \ UINT32_C(0x1) /* * Use weighted fair queue arbitration for the TX ring. * Weight is specified in arb_policy_param */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \ UINT32_C(0x2) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \ HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ /* Reserved field. */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK \ UINT32_C(0xf0) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4 /* * Arbitration policy specific parameter. * # For strict priority arbitration policy, this field * represents a priority value. If set to 0, then the priority * is not specified and the HWRM is allowed to select * any priority for this TX ring. * # For weighted fair queue arbitration policy, this field * represents a weight value. If set to 0, then the weight * is not specified and the HWRM is allowed to select * any weight for this TX ring. */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \ UINT32_C(0xff00) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8 uint16_t unused_3; /* * This field is reserved for the future use. * It shall be set to 0. */ uint32_t reserved3; /* * This field is used only when ring_type is a TX ring. * This input indicates what statistics context this ring * should be associated with. */ uint32_t stat_ctx_id; /* * This field is reserved for the future use. * It shall be set to 0. */ uint32_t reserved4; /* * This field is used only when ring_type is a TX ring * to specify maximum BW allocated to the TX ring. * The HWRM will translate this value into byte counter and * time interval used for this ring inside the device. */ uint32_t max_bw; /* The bandwidth value. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \ HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID /* * This field is used only when ring_type is a Completion ring. * This value indicates what interrupt mode should be used * on this completion ring. * Note: In the legacy interrupt mode, no more than 16 * completion rings are allowed. */ uint8_t int_mode; /* Legacy INTA */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0) /* Reserved */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1) /* MSI-X */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2) /* No Interrupt - Polled mode */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3) #define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \ HWRM_RING_ALLOC_INPUT_INT_MODE_POLL uint8_t unused_4[3]; } __attribute__((packed)); /* hwrm_ring_alloc_output (size:128b/16B) */ struct hwrm_ring_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * Physical number of ring allocated. * This value shall be unique for a ring type. */ uint16_t ring_id; /* Logical number of ring allocated. */ uint16_t logical_ring_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************** * hwrm_ring_free * ******************/ /* hwrm_ring_free_input (size:192b/24B) */ struct hwrm_ring_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Ring Type. */ uint8_t ring_type; /* L2 Completion Ring (CR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) /* TX Ring (TR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1) /* RX Ring (RR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2) /* RoCE Notification Completion Ring (ROCE_CR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) /* RX Aggregation Ring */ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX_AGG UINT32_C(0x4) /* Notification Queue */ #define HWRM_RING_FREE_INPUT_RING_TYPE_NQ UINT32_C(0x5) #define HWRM_RING_FREE_INPUT_RING_TYPE_LAST \ HWRM_RING_FREE_INPUT_RING_TYPE_NQ uint8_t unused_0; /* Physical number of ring allocated. */ uint16_t ring_id; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_ring_free_output (size:128b/16B) */ struct hwrm_ring_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************************** * hwrm_ring_cmpl_ring_qaggint_params * **************************************/ /* hwrm_ring_cmpl_ring_qaggint_params_input (size:192b/24B) */ struct hwrm_ring_cmpl_ring_qaggint_params_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Physical number of completion ring. */ uint16_t ring_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_ring_cmpl_ring_qaggint_params_output (size:256b/32B) */ struct hwrm_ring_cmpl_ring_qaggint_params_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint16_t flags; /* * When this bit is set to '1', interrupt max * timer is reset whenever a completion is received. */ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_TIMER_RESET \ UINT32_C(0x1) /* * When this bit is set to '1', ring idle mode * aggregation will be enabled. */ #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS_OUTPUT_FLAGS_RING_IDLE \ UINT32_C(0x2) /* * Number of completions to aggregate before DMA * during the normal mode. */ uint16_t num_cmpl_dma_aggr; /* * Number of completions to aggregate before DMA * during the interrupt mode. */ uint16_t num_cmpl_dma_aggr_during_int; /* * Timer in unit of 80-nsec used to aggregate completions before * DMA during the normal mode (not in interrupt mode). */ uint16_t cmpl_aggr_dma_tmr; /* * Timer in unit of 80-nsec used to aggregate completions before * DMA during the interrupt mode. */ uint16_t cmpl_aggr_dma_tmr_during_int; /* Minimum time (in unit of 80-nsec) between two interrupts. */ uint16_t int_lat_tmr_min; /* * Maximum wait time (in unit of 80-nsec) spent aggregating * completions before signaling the interrupt after the * interrupt is enabled. */ uint16_t int_lat_tmr_max; /* * Minimum number of completions aggregated before signaling * an interrupt. */ uint16_t num_cmpl_aggr_int; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************************************** * hwrm_ring_cmpl_ring_cfg_aggint_params * *****************************************/ /* hwrm_ring_cmpl_ring_cfg_aggint_params_input (size:320b/40B) */ struct hwrm_ring_cmpl_ring_cfg_aggint_params_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Physical number of completion ring. */ uint16_t ring_id; uint16_t flags; /* * When this bit is set to '1', interrupt latency max * timer is reset whenever a completion is received. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_TIMER_RESET \ UINT32_C(0x1) /* * When this bit is set to '1', ring idle mode * aggregation will be enabled. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_RING_IDLE \ UINT32_C(0x2) /* * Set this flag to 1 when configuring parameters on a * notification queue. Set this flag to 0 when configuring * parameters on a completion queue. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_FLAGS_IS_NQ \ UINT32_C(0x4) /* * Number of completions to aggregate before DMA * during the normal mode. */ uint16_t num_cmpl_dma_aggr; /* * Number of completions to aggregate before DMA * during the interrupt mode. */ uint16_t num_cmpl_dma_aggr_during_int; /* * Timer in unit of 80-nsec used to aggregate completions before * DMA during the normal mode (not in interrupt mode). */ uint16_t cmpl_aggr_dma_tmr; /* * Timer in unit of 80-nsec used to aggregate completions before * DMA during the interrupt mode. */ uint16_t cmpl_aggr_dma_tmr_during_int; /* Minimum time (in unit of 80-nsec) between two interrupts. */ uint16_t int_lat_tmr_min; /* * Maximum wait time (in unit of 80-nsec) spent aggregating * cmpls before signaling the interrupt after the * interrupt is enabled. */ uint16_t int_lat_tmr_max; /* * Minimum number of completions aggregated before signaling * an interrupt. */ uint16_t num_cmpl_aggr_int; /* * Bitfield that indicates which parameters are to be applied. Only * required when configuring devices with notification queues, and * used in that case to set certain parameters on completion queues * and others on notification queues. */ uint16_t enables; /* * This bit must be '1' for the num_cmpl_dma_aggr field to be * configured. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR \ UINT32_C(0x1) /* * This bit must be '1' for the num_cmpl_dma_aggr_during_int field to be * configured. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_DMA_AGGR_DURING_INT \ UINT32_C(0x2) /* * This bit must be '1' for the cmpl_aggr_dma_tmr field to be * configured. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_CMPL_AGGR_DMA_TMR \ UINT32_C(0x4) /* * This bit must be '1' for the int_lat_tmr_min field to be * configured. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MIN \ UINT32_C(0x8) /* * This bit must be '1' for the int_lat_tmr_max field to be * configured. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_INT_LAT_TMR_MAX \ UINT32_C(0x10) /* * This bit must be '1' for the num_cmpl_aggr_int field to be * configured. */ #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS_INPUT_ENABLES_NUM_CMPL_AGGR_INT \ UINT32_C(0x20) uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_ring_cmpl_ring_cfg_aggint_params_output (size:128b/16B) */ struct hwrm_ring_cmpl_ring_cfg_aggint_params_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************* * hwrm_ring_reset * *******************/ /* hwrm_ring_reset_input (size:192b/24B) */ struct hwrm_ring_reset_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Ring Type. */ uint8_t ring_type; /* L2 Completion Ring (CR) */ #define HWRM_RING_RESET_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) /* TX Ring (TR) */ #define HWRM_RING_RESET_INPUT_RING_TYPE_TX UINT32_C(0x1) /* RX Ring (RR) */ #define HWRM_RING_RESET_INPUT_RING_TYPE_RX UINT32_C(0x2) /* RoCE Notification Completion Ring (ROCE_CR) */ #define HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) #define HWRM_RING_RESET_INPUT_RING_TYPE_LAST \ HWRM_RING_RESET_INPUT_RING_TYPE_ROCE_CMPL uint8_t unused_0; /* Physical number of the ring. */ uint16_t ring_id; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_ring_reset_output (size:128b/16B) */ struct hwrm_ring_reset_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_ring_grp_alloc * ***********************/ /* hwrm_ring_grp_alloc_input (size:192b/24B) */ struct hwrm_ring_grp_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This value identifies the CR associated with the ring * group. */ uint16_t cr; /* * This value identifies the main RR associated with the ring * group. */ uint16_t rr; /* * This value identifies the aggregation RR associated with * the ring group. If this value is 0xFF... (All Fs), then no * Aggregation ring will be set. */ uint16_t ar; /* * This value identifies the statistics context associated * with the ring group. */ uint16_t sc; } __attribute__((packed)); /* hwrm_ring_grp_alloc_output (size:128b/16B) */ struct hwrm_ring_grp_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * This is the ring group ID value. Use this value to program * the default ring group for the VNIC or as table entries * in an RSS/COS context. */ uint32_t ring_group_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_ring_grp_free * **********************/ /* hwrm_ring_grp_free_input (size:192b/24B) */ struct hwrm_ring_grp_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* This is the ring group ID value. */ uint32_t ring_group_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_ring_grp_free_output (size:128b/16B) */ struct hwrm_ring_grp_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /**************************** * hwrm_cfa_l2_filter_alloc * ****************************/ /* hwrm_cfa_l2_filter_alloc_input (size:768b/96B) */ struct hwrm_cfa_l2_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH \ UINT32_C(0x1) /* tx path */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \ UINT32_C(0x0) /* rx path */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX /* Setting of this flag indicates the applicability to the loopback path. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ UINT32_C(0x2) /* * Setting of this flag indicates drop action. If this flag is not set, * then it should be considered accept action. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP \ UINT32_C(0x4) /* * If this flag is set, all t_l2_* fields are invalid * and they should not be specified. * If this flag is set, then l2_* fields refer to * fields of outermost L2 header. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST \ UINT32_C(0x8) uint32_t enables; /* * This bit must be '1' for the l2_addr field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \ UINT32_C(0x1) /* * This bit must be '1' for the l2_addr_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \ UINT32_C(0x2) /* * This bit must be '1' for the l2_ovlan field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN \ UINT32_C(0x4) /* * This bit must be '1' for the l2_ovlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \ UINT32_C(0x8) /* * This bit must be '1' for the l2_ivlan field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \ UINT32_C(0x10) /* * This bit must be '1' for the l2_ivlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \ UINT32_C(0x20) /* * This bit must be '1' for the t_l2_addr field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR \ UINT32_C(0x40) /* * This bit must be '1' for the t_l2_addr_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \ UINT32_C(0x80) /* * This bit must be '1' for the t_l2_ovlan field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \ UINT32_C(0x100) /* * This bit must be '1' for the t_l2_ovlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \ UINT32_C(0x200) /* * This bit must be '1' for the t_l2_ivlan field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \ UINT32_C(0x400) /* * This bit must be '1' for the t_l2_ivlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \ UINT32_C(0x800) /* * This bit must be '1' for the src_type field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE \ UINT32_C(0x1000) /* * This bit must be '1' for the src_id field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID \ UINT32_C(0x2000) /* * This bit must be '1' for the tunnel_type field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x4000) /* * This bit must be '1' for the dst_id field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ UINT32_C(0x8000) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x10000) /* * This value sets the match value for the L2 MAC address. * Destination MAC address for RX path. * Source MAC address for TX path. */ uint8_t l2_addr[6]; uint8_t unused_0[2]; /* * This value sets the mask value for the L2 address. * A value of 0 will mask the corresponding bit from * compare. */ uint8_t l2_addr_mask[6]; /* This value sets VLAN ID value for outer VLAN. */ uint16_t l2_ovlan; /* * This value sets the mask value for the ovlan id. * A value of 0 will mask the corresponding bit from * compare. */ uint16_t l2_ovlan_mask; /* This value sets VLAN ID value for inner VLAN. */ uint16_t l2_ivlan; /* * This value sets the mask value for the ivlan id. * A value of 0 will mask the corresponding bit from * compare. */ uint16_t l2_ivlan_mask; uint8_t unused_1[2]; /* * This value sets the match value for the tunnel * L2 MAC address. * Destination MAC address for RX path. * Source MAC address for TX path. */ uint8_t t_l2_addr[6]; uint8_t unused_2[2]; /* * This value sets the mask value for the tunnel L2 * address. * A value of 0 will mask the corresponding bit from * compare. */ uint8_t t_l2_addr_mask[6]; /* This value sets VLAN ID value for tunnel outer VLAN. */ uint16_t t_l2_ovlan; /* * This value sets the mask value for the tunnel ovlan id. * A value of 0 will mask the corresponding bit from * compare. */ uint16_t t_l2_ovlan_mask; /* This value sets VLAN ID value for tunnel inner VLAN. */ uint16_t t_l2_ivlan; /* * This value sets the mask value for the tunnel ivlan id. * A value of 0 will mask the corresponding bit from * compare. */ uint16_t t_l2_ivlan_mask; /* This value identifies the type of source of the packet. */ uint8_t src_type; /* Network port */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0) /* Physical function */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1) /* Virtual function */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2) /* Virtual NIC of a function */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3) /* Embedded processor for CFA management */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4) /* Embedded processor for OOB management */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5) /* Embedded processor for RoCE */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6) /* Embedded processor for network proxy functions */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7) #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_LAST \ HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG uint8_t unused_3; /* * This value is the id of the source. * For a network port, it represents port_id. * For a physical function, it represents fid. * For a virtual function, it represents vf_id. * For a vnic, it represents vnic_id. * For embedded processors, this id is not valid. * * Notes: * 1. The function ID is implied if it src_id is * not provided for a src_type that is either */ uint32_t src_id; /* Tunnel Type. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Any tunneled traffic */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL uint8_t unused_4; /* * If set, this value shall represent the * Logical VNIC ID of the destination VNIC for the RX * path and network port id of the destination port for * the TX path. */ uint16_t dst_id; /* * Logical VNIC ID of the VNIC where traffic is * mirrored. */ uint16_t mirror_vnic_id; /* * This hint is provided to help in placing * the filter in the filter table. */ uint8_t pri_hint; /* No preference */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ UINT32_C(0x0) /* Above the given filter */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \ UINT32_C(0x1) /* Below the given filter */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \ UINT32_C(0x2) /* As high as possible */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX \ UINT32_C(0x3) /* As low as possible */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN \ UINT32_C(0x4) #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_LAST \ HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN uint8_t unused_5; uint32_t unused_6; /* * This is the ID of the filter that goes along with * the pri_hint. * * This field is valid only for the following values. * 1 - Above the given filter * 2 - Below the given filter */ uint64_t l2_filter_id_hint; } __attribute__((packed)); /* hwrm_cfa_l2_filter_alloc_output (size:192b/24B) */ struct hwrm_cfa_l2_filter_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * This value identifies a set of CFA data structures used for an L2 * context. */ uint64_t l2_filter_id; /* * This is the ID of the flow associated with this * filter. * This value shall be used to match and associate the * flow identifier returned in completion records. * A value of 0xFFFFFFFF shall indicate no flow id. */ uint32_t flow_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_cfa_l2_filter_free * ***************************/ /* hwrm_cfa_l2_filter_free_input (size:192b/24B) */ struct hwrm_cfa_l2_filter_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This value identifies a set of CFA data structures used for an L2 * context. */ uint64_t l2_filter_id; } __attribute__((packed)); /* hwrm_cfa_l2_filter_free_output (size:128b/16B) */ struct hwrm_cfa_l2_filter_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_cfa_l2_filter_cfg * **************************/ /* hwrm_cfa_l2_filter_cfg_input (size:320b/40B) */ struct hwrm_cfa_l2_filter_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX /* * Setting of this flag indicates drop action. If this flag is not set, * then it should be considered accept action. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2) uint32_t enables; /* * This bit must be '1' for the dst_id field to be * configured. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID \ UINT32_C(0x1) /* * This bit must be '1' for the new_mirror_vnic_id field to be * configured. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) /* * This value identifies a set of CFA data structures used for an L2 * context. */ uint64_t l2_filter_id; /* * If set, this value shall represent the * Logical VNIC ID of the destination VNIC for the RX * path and network port id of the destination port for * the TX path. */ uint32_t dst_id; /* * New Logical VNIC ID of the VNIC where traffic is * mirrored. */ uint32_t new_mirror_vnic_id; } __attribute__((packed)); /* hwrm_cfa_l2_filter_cfg_output (size:128b/16B) */ struct hwrm_cfa_l2_filter_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_cfa_l2_set_rx_mask * ***************************/ /* hwrm_cfa_l2_set_rx_mask_input (size:448b/56B) */ struct hwrm_cfa_l2_set_rx_mask_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* VNIC ID */ uint32_t vnic_id; uint32_t mask; /* * When this bit is '1', the function is requested to accept * multi-cast packets specified by the multicast addr table. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST \ UINT32_C(0x2) /* * When this bit is '1', the function is requested to accept * all multi-cast packets. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST \ UINT32_C(0x4) /* * When this bit is '1', the function is requested to accept * broadcast packets. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST \ UINT32_C(0x8) /* * When this bit is '1', the function is requested to be * put in the promiscuous mode. * * The HWRM should accept any function to set up * promiscuous mode. * * The HWRM shall follow the semantics below for the * promiscuous mode support. * # When partitioning is not enabled on a port * (i.e. single PF on the port), then the PF shall * be allowed to be in the promiscuous mode. When the * PF is in the promiscuous mode, then it shall * receive all host bound traffic on that port. * # When partitioning is enabled on a port * (i.e. multiple PFs per port) and a PF on that * port is in the promiscuous mode, then the PF * receives all traffic within that partition as * identified by a unique identifier for the * PF (e.g. S-Tag). If a unique outer VLAN * for the PF is specified, then the setting of * promiscuous mode on that PF shall result in the * PF receiving all host bound traffic with matching * outer VLAN. * # A VF shall can be set in the promiscuous mode. * In the promiscuous mode, the VF does not receive any * traffic unless a unique outer VLAN for the * VF is specified. If a unique outer VLAN * for the VF is specified, then the setting of * promiscuous mode on that VF shall result in the * VF receiving all host bound traffic with the * matching outer VLAN. * # The HWRM shall allow the setting of promiscuous * mode on a function independently from the * promiscuous mode settings on other functions. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS \ UINT32_C(0x10) /* * If this flag is set, the corresponding RX * filters shall be set up to cover multicast/broadcast * filters for the outermost Layer 2 destination MAC * address field. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST \ UINT32_C(0x20) /* * If this flag is set, the corresponding RX * filters shall be set up to cover multicast/broadcast * filters for the VLAN-tagged packets that match the * TPID and VID fields of VLAN tags in the VLAN tag * table specified in this command. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY \ UINT32_C(0x40) /* * If this flag is set, the corresponding RX * filters shall be set up to cover multicast/broadcast * filters for non-VLAN tagged packets and VLAN-tagged * packets that match the TPID and VID fields of VLAN * tags in the VLAN tag table specified in this command. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN \ UINT32_C(0x80) /* * If this flag is set, the corresponding RX * filters shall be set up to cover multicast/broadcast * filters for non-VLAN tagged packets and VLAN-tagged * packets matching any VLAN tag. * * If this flag is set, then the HWRM shall ignore * VLAN tags specified in vlan_tag_tbl. * * If none of vlanonly, vlan_nonvlan, and anyvlan_nonvlan * flags is set, then the HWRM shall ignore * VLAN tags specified in vlan_tag_tbl. * * The HWRM client shall set at most one flag out of * vlanonly, vlan_nonvlan, and anyvlan_nonvlan. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \ UINT32_C(0x100) /* This is the address for mcast address tbl. */ uint64_t mc_tbl_addr; /* * This value indicates how many entries in mc_tbl are valid. * Each entry is 6 bytes. */ uint32_t num_mc_entries; uint8_t unused_0[4]; /* * This is the address for VLAN tag table. * Each VLAN entry in the table is 4 bytes of a VLAN tag * including TPID, PCP, DEI, and VID fields in network byte * order. */ uint64_t vlan_tag_tbl_addr; /* * This value indicates how many entries in vlan_tag_tbl are * valid. Each entry is 4 bytes. */ uint32_t num_vlan_tags; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_cfa_l2_set_rx_mask_output (size:128b/16B) */ struct hwrm_cfa_l2_set_rx_mask_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_cfa_l2_set_rx_mask_cmd_err (size:64b/8B) */ struct hwrm_cfa_l2_set_rx_mask_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN \ UINT32_C(0x0) /* Unable to complete operation due to conflict with Ntuple Filter */ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \ UINT32_C(0x1) #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_LAST \ HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR uint8_t unused_0[7]; } __attribute__((packed)); /******************************* * hwrm_cfa_vlan_antispoof_cfg * *******************************/ /* hwrm_cfa_vlan_antispoof_cfg_input (size:256b/32B) */ struct hwrm_cfa_vlan_antispoof_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being configured. * Only valid for a VF FID configured by the PF. */ uint16_t fid; uint8_t unused_0[2]; /* Number of VLAN entries in the vlan_tag_mask_tbl. */ uint32_t num_vlan_entries; /* * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN * antispoof table. Each table entry contains the 16-bit TPID * (0x8100 or 0x88a8 only), 16-bit VLAN ID, and a 16-bit mask, * all in network order to match hwrm_cfa_l2_set_rx_mask. * For an individual VLAN entry, the mask value should be 0xfff * for the 12-bit VLAN ID. */ uint64_t vlan_tag_mask_tbl_addr; } __attribute__((packed)); /* hwrm_cfa_vlan_antispoof_cfg_output (size:128b/16B) */ struct hwrm_cfa_vlan_antispoof_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************** * hwrm_cfa_vlan_antispoof_qcfg * ********************************/ /* hwrm_cfa_vlan_antispoof_qcfg_input (size:256b/32B) */ struct hwrm_cfa_vlan_antispoof_qcfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Function ID of the function that is being queried. * Only valid for a VF FID queried by the PF. */ uint16_t fid; uint8_t unused_0[2]; /* * Maximum number of VLAN entries the firmware is allowed to DMA * to vlan_tag_mask_tbl. */ uint32_t max_vlan_entries; /* * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN * antispoof table to which firmware will DMA to. Each table * entry will contain the 16-bit TPID (0x8100 or 0x88a8 only), * 16-bit VLAN ID, and a 16-bit mask, all in network order to * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, * the mask value should be 0xfff for the 12-bit VLAN ID. */ uint64_t vlan_tag_mask_tbl_addr; } __attribute__((packed)); /* hwrm_cfa_vlan_antispoof_qcfg_output (size:128b/16B) */ struct hwrm_cfa_vlan_antispoof_qcfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Number of valid entries DMAd by firmware to vlan_tag_mask_tbl. */ uint32_t num_vlan_entries; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************** * hwrm_cfa_tunnel_filter_alloc * ********************************/ /* hwrm_cfa_tunnel_filter_alloc_input (size:704b/88B) */ struct hwrm_cfa_tunnel_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* Setting of this flag indicates the applicability to the loopback path. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ UINT32_C(0x1) uint32_t enables; /* * This bit must be '1' for the l2_filter_id field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ UINT32_C(0x1) /* * This bit must be '1' for the l2_addr field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR \ UINT32_C(0x2) /* * This bit must be '1' for the l2_ivlan field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN \ UINT32_C(0x4) /* * This bit must be '1' for the l3_addr field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR \ UINT32_C(0x8) /* * This bit must be '1' for the l3_addr_type field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_L3_ADDR_TYPE \ UINT32_C(0x10) /* * This bit must be '1' for the t_l3_addr_type field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR_TYPE \ UINT32_C(0x20) /* * This bit must be '1' for the t_l3_addr field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_T_L3_ADDR \ UINT32_C(0x40) /* * This bit must be '1' for the tunnel_type field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x80) /* * This bit must be '1' for the vni field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_VNI \ UINT32_C(0x100) /* * This bit must be '1' for the dst_vnic_id field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_DST_VNIC_ID \ UINT32_C(0x200) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x400) /* * This value identifies a set of CFA data structures used for an L2 * context. */ uint64_t l2_filter_id; /* * This value sets the match value for the inner L2 * MAC address. * Destination MAC address for RX path. * Source MAC address for TX path. */ uint8_t l2_addr[6]; /* * This value sets VLAN ID value for inner VLAN. * Only 12-bits of VLAN ID are used in setting the filter. */ uint16_t l2_ivlan; /* * The value of inner destination IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t l3_addr[4]; /* * The value of tunnel destination IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t t_l3_addr[4]; /* * This value indicates the type of inner IP address. * 4 - IPv4 * 6 - IPv6 * All others are invalid. */ uint8_t l3_addr_type; /* * This value indicates the type of tunnel IP address. * 4 - IPv4 * 6 - IPv6 * All others are invalid. */ uint8_t t_l3_addr_type; /* Tunnel Type. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Any tunneled traffic */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL /* * tunnel_flags allows the user to indicate the tunnel tag detection * for the tunnel type specified in tunnel_type. */ uint8_t tunnel_flags; /* * If the tunnel_type is geneve, then this bit indicates if we * need to match the geneve OAM packet. * If the tunnel_type is nvgre or gre, then this bit indicates if * we need to detect checksum present bit in geneve header. * If the tunnel_type is mpls, then this bit indicates if we need * to match mpls packet with explicit IPV4/IPV6 null header. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_OAM_CHECKSUM_EXPLHDR \ UINT32_C(0x1) /* * If the tunnel_type is geneve, then this bit indicates if we * need to detect the critical option bit set in the oam packet. * If the tunnel_type is nvgre or gre, then this bit indicates * if we need to match nvgre packets with key present bit set in * gre header. * If the tunnel_type is mpls, then this bit indicates if we * need to match mpls packet with S bit from inner/second label. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_CRITICAL_OPT_S1 \ UINT32_C(0x2) /* * If the tunnel_type is geneve, then this bit indicates if we * need to match geneve packet with extended header bit set in * geneve header. * If the tunnel_type is nvgre or gre, then this bit indicates * if we need to match nvgre packets with sequence number * present bit set in gre header. * If the tunnel_type is mpls, then this bit indicates if we * need to match mpls packet with S bit from out/first label. */ #define HWRM_CFA_TUNNEL_FILTER_ALLOC_INPUT_TUNNEL_FLAGS_TUN_FLAGS_EXTHDR_SEQNUM_S0 \ UINT32_C(0x4) /* * Virtual Network Identifier (VNI). Only valid with * tunnel_types VXLAN, NVGRE, and Geneve. * Only lower 24-bits of VNI field are used * in setting up the filter. */ uint32_t vni; /* Logical VNIC ID of the destination VNIC. */ uint32_t dst_vnic_id; /* * Logical VNIC ID of the VNIC where traffic is * mirrored. */ uint32_t mirror_vnic_id; } __attribute__((packed)); /* hwrm_cfa_tunnel_filter_alloc_output (size:192b/24B) */ struct hwrm_cfa_tunnel_filter_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value is an opaque id into CFA data structures. */ uint64_t tunnel_filter_id; /* * This is the ID of the flow associated with this * filter. * This value shall be used to match and associate the * flow identifier returned in completion records. * A value of 0xFFFFFFFF shall indicate no flow id. */ uint32_t flow_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************* * hwrm_cfa_tunnel_filter_free * *******************************/ /* hwrm_cfa_tunnel_filter_free_input (size:192b/24B) */ struct hwrm_cfa_tunnel_filter_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* This value is an opaque id into CFA data structures. */ uint64_t tunnel_filter_id; } __attribute__((packed)); /* hwrm_cfa_tunnel_filter_free_output (size:128b/16B) */ struct hwrm_cfa_tunnel_filter_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************************** * hwrm_cfa_redirect_tunnel_type_alloc * ***************************************/ /* hwrm_cfa_redirect_tunnel_type_alloc_input (size:192b/24B) */ struct hwrm_cfa_redirect_tunnel_type_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* The destination function id, to whom the traffic is redirected. */ uint16_t dest_fid; /* Tunnel Type. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ UINT32_C(0xa) /* Any tunneled traffic */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL /* Tunnel alloc flags. */ uint8_t flags; /* Setting of this flag indicates modify existing redirect tunnel to new destination function ID. */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_ALLOC_INPUT_FLAGS_MODIFY_DST \ UINT32_C(0x1) uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_cfa_redirect_tunnel_type_alloc_output (size:128b/16B) */ struct hwrm_cfa_redirect_tunnel_type_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************************** * hwrm_cfa_redirect_tunnel_type_free * **************************************/ /* hwrm_cfa_redirect_tunnel_type_free_input (size:192b/24B) */ struct hwrm_cfa_redirect_tunnel_type_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* The destination function id, to whom the traffic is redirected. */ uint16_t dest_fid; /* Tunnel Type. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \ UINT32_C(0xa) /* Any tunneled traffic */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_REDIRECT_TUNNEL_TYPE_FREE_INPUT_TUNNEL_TYPE_ANYTUNNEL uint8_t unused_0[5]; } __attribute__((packed)); /* hwrm_cfa_redirect_tunnel_type_free_output (size:128b/16B) */ struct hwrm_cfa_redirect_tunnel_type_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************************** * hwrm_cfa_redirect_tunnel_type_info * **************************************/ /* hwrm_cfa_redirect_tunnel_type_info_input (size:192b/24B) */ struct hwrm_cfa_redirect_tunnel_type_info_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* The source function id. */ uint16_t src_fid; /* Tunnel Type. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_IPGRE_V1 \ UINT32_C(0xa) /* Any tunneled traffic */ #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_REDIRECT_TUNNEL_TYPE_INFO_INPUT_TUNNEL_TYPE_ANYTUNNEL uint8_t unused_0[5]; } __attribute__((packed)); /* hwrm_cfa_redirect_tunnel_type_info_output (size:128b/16B) */ struct hwrm_cfa_redirect_tunnel_type_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* The destination function id, to whom the traffic is redirected. */ uint16_t dest_fid; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_vxlan_ipv4_hdr (size:128b/16B) */ struct hwrm_vxlan_ipv4_hdr { /* IPv4 version and header length. */ uint8_t ver_hlen; /* IPv4 header length */ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_MASK UINT32_C(0xf) #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_HEADER_LENGTH_SFT 0 /* Version */ #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_MASK UINT32_C(0xf0) #define HWRM_VXLAN_IPV4_HDR_VER_HLEN_VERSION_SFT 4 /* IPv4 type of service. */ uint8_t tos; /* IPv4 identification. */ uint16_t ip_id; /* IPv4 flags and offset. */ uint16_t flags_frag_offset; /* IPv4 TTL. */ uint8_t ttl; /* IPv4 protocol. */ uint8_t protocol; /* IPv4 source address. */ uint32_t src_ip_addr; /* IPv4 destination address. */ uint32_t dest_ip_addr; } __attribute__((packed)); /* hwrm_vxlan_ipv6_hdr (size:320b/40B) */ struct hwrm_vxlan_ipv6_hdr { /* IPv6 version, traffic class and flow label. */ uint32_t ver_tc_flow_label; /* IPv6 version shift */ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_SFT \ UINT32_C(0x1c) /* IPv6 version mask */ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_VER_MASK \ UINT32_C(0xf0000000) /* IPv6 TC shift */ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_SFT \ UINT32_C(0x14) /* IPv6 TC mask */ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_TC_MASK \ UINT32_C(0xff00000) /* IPv6 flow label shift */ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_SFT \ UINT32_C(0x0) /* IPv6 flow label mask */ #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK \ UINT32_C(0xfffff) #define HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_LAST \ HWRM_VXLAN_IPV6_HDR_VER_TC_FLOW_LABEL_FLOW_LABEL_MASK /* IPv6 payload length. */ uint16_t payload_len; /* IPv6 next header. */ uint8_t next_hdr; /* IPv6 TTL. */ uint8_t ttl; /* IPv6 source address. */ uint32_t src_ip_addr[4]; /* IPv6 destination address. */ uint32_t dest_ip_addr[4]; } __attribute__((packed)); /* hwrm_cfa_encap_data_vxlan (size:576b/72B) */ struct hwrm_cfa_encap_data_vxlan { /* Source MAC address. */ uint8_t src_mac_addr[6]; /* reserved. */ uint16_t unused_0; /* Destination MAC address. */ uint8_t dst_mac_addr[6]; /* Number of VLAN tags. */ uint8_t num_vlan_tags; /* reserved. */ uint8_t unused_1; /* Outer VLAN TPID. */ uint16_t ovlan_tpid; /* Outer VLAN TCI. */ uint16_t ovlan_tci; /* Inner VLAN TPID. */ uint16_t ivlan_tpid; /* Inner VLAN TCI. */ uint16_t ivlan_tci; /* L3 header fields. */ uint32_t l3[10]; /* IP version mask. */ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_MASK UINT32_C(0xf) /* IP version 4. */ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV4 UINT32_C(0x4) /* IP version 6. */ #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 UINT32_C(0x6) #define HWRM_CFA_ENCAP_DATA_VXLAN_L3_LAST \ HWRM_CFA_ENCAP_DATA_VXLAN_L3_VER_IPV6 /* UDP source port. */ uint16_t src_port; /* UDP destination port. */ uint16_t dst_port; /* VXLAN Network Identifier. */ uint32_t vni; } __attribute__((packed)); /******************************* * hwrm_cfa_encap_record_alloc * *******************************/ /* hwrm_cfa_encap_record_alloc_input (size:832b/104B) */ struct hwrm_cfa_encap_record_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* Setting of this flag indicates the applicability to the loopback path. */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_FLAGS_LOOPBACK \ UINT32_C(0x1) /* Encapsulation Type. */ uint8_t encap_type; /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) after inside Ethernet payload */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_MPLS \ UINT32_C(0x6) /* VLAN */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_VLAN \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE \ UINT32_C(0x8) #define HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_LAST \ HWRM_CFA_ENCAP_RECORD_ALLOC_INPUT_ENCAP_TYPE_IPGRE uint8_t unused_0[3]; /* This value is encap data used for the given encap type. */ uint32_t encap_data[20]; } __attribute__((packed)); /* hwrm_cfa_encap_record_alloc_output (size:128b/16B) */ struct hwrm_cfa_encap_record_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value is an opaque id into CFA data structures. */ uint32_t encap_record_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************************** * hwrm_cfa_encap_record_free * ******************************/ /* hwrm_cfa_encap_record_free_input (size:192b/24B) */ struct hwrm_cfa_encap_record_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* This value is an opaque id into CFA data structures. */ uint32_t encap_record_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_cfa_encap_record_free_output (size:128b/16B) */ struct hwrm_cfa_encap_record_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************** * hwrm_cfa_ntuple_filter_alloc * ********************************/ /* hwrm_cfa_ntuple_filter_alloc_input (size:1024b/128B) */ struct hwrm_cfa_ntuple_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* Setting of this flag indicates the applicability to the loopback path. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ UINT32_C(0x1) /* * Setting of this flag indicates drop action. If this flag is not set, * then it should be considered accept action. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP \ UINT32_C(0x2) /* * Setting of this flag indicates that a meter is expected to be attached * to this flow. This hint can be used when choosing the action record * format required for the flow. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER \ UINT32_C(0x4) uint32_t enables; /* * This bit must be '1' for the l2_filter_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ UINT32_C(0x1) /* * This bit must be '1' for the ethertype field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \ UINT32_C(0x2) /* * This bit must be '1' for the tunnel_type field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x4) /* * This bit must be '1' for the src_macaddr field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \ UINT32_C(0x8) /* * This bit must be '1' for the ipaddr_type field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ UINT32_C(0x10) /* * This bit must be '1' for the src_ipaddr field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \ UINT32_C(0x20) /* * This bit must be '1' for the src_ipaddr_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \ UINT32_C(0x40) /* * This bit must be '1' for the dst_ipaddr field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \ UINT32_C(0x80) /* * This bit must be '1' for the dst_ipaddr_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \ UINT32_C(0x100) /* * This bit must be '1' for the ip_protocol field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ UINT32_C(0x200) /* * This bit must be '1' for the src_port field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \ UINT32_C(0x400) /* * This bit must be '1' for the src_port_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \ UINT32_C(0x800) /* * This bit must be '1' for the dst_port field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \ UINT32_C(0x1000) /* * This bit must be '1' for the dst_port_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \ UINT32_C(0x2000) /* * This bit must be '1' for the pri_hint field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \ UINT32_C(0x4000) /* * This bit must be '1' for the ntuple_filter_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \ UINT32_C(0x8000) /* * This bit must be '1' for the dst_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ UINT32_C(0x10000) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x20000) /* * This bit must be '1' for the dst_macaddr field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ UINT32_C(0x40000) /* * This value identifies a set of CFA data structures used for an L2 * context. */ uint64_t l2_filter_id; /* * This value indicates the source MAC address in * the Ethernet header. */ uint8_t src_macaddr[6]; /* This value indicates the ethertype in the Ethernet header. */ uint16_t ethertype; /* * This value indicates the type of IP address. * 4 - IPv4 * 6 - IPv6 * All others are invalid. */ uint8_t ip_addr_type; /* invalid */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \ UINT32_C(0x0) /* IPv4 */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \ UINT32_C(0x4) /* IPv6 */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \ UINT32_C(0x6) #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 /* * The value of protocol filed in IP header. * Applies to UDP and TCP traffic. * 6 - TCP * 17 - UDP */ uint8_t ip_protocol; /* invalid */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \ UINT32_C(0x0) /* TCP */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \ UINT32_C(0x6) /* UDP */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \ UINT32_C(0x11) #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP /* * If set, this value shall represent the * Logical VNIC ID of the destination VNIC for the RX * path and network port id of the destination port for * the TX path. */ uint16_t dst_id; /* * Logical VNIC ID of the VNIC where traffic is * mirrored. */ uint16_t mirror_vnic_id; /* * This value indicates the tunnel type for this filter. * If this field is not specified, then the filter shall * apply to both non-tunneled and tunneled packets. * If this field conflicts with the tunnel_type specified * in the l2_filter_id, then the HWRM shall return an * error for this command. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Any tunneled traffic */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL /* * This hint is provided to help in placing * the filter in the filter table. */ uint8_t pri_hint; /* No preference */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ UINT32_C(0x0) /* Above the given filter */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE \ UINT32_C(0x1) /* Below the given filter */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW \ UINT32_C(0x2) /* As high as possible */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \ UINT32_C(0x3) /* As low as possible */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST \ UINT32_C(0x4) #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LAST \ HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST /* * The value of source IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t src_ipaddr[4]; /* * The value of source IP address mask to be used in * filtering. * For IPv4, first four bytes represent the IP address mask. */ uint32_t src_ipaddr_mask[4]; /* * The value of destination IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t dst_ipaddr[4]; /* * The value of destination IP address mask to be used in * filtering. * For IPv4, first four bytes represent the IP address mask. */ uint32_t dst_ipaddr_mask[4]; /* * The value of source port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t src_port; /* * The value of source port mask to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t src_port_mask; /* * The value of destination port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t dst_port; /* * The value of destination port mask to be used in * filtering. * Applies to UDP and TCP traffic. */ uint16_t dst_port_mask; /* * This is the ID of the filter that goes along with * the pri_hint. */ uint64_t ntuple_filter_id_hint; } __attribute__((packed)); /* hwrm_cfa_ntuple_filter_alloc_output (size:192b/24B) */ struct hwrm_cfa_ntuple_filter_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value is an opaque id into CFA data structures. */ uint64_t ntuple_filter_id; /* * This is the ID of the flow associated with this * filter. * This value shall be used to match and associate the * flow identifier returned in completion records. * A value of 0xFFFFFFFF shall indicate no flow id. */ uint32_t flow_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_cfa_ntuple_filter_alloc_cmd_err (size:64b/8B) */ struct hwrm_cfa_ntuple_filter_alloc_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN \ UINT32_C(0x0) /* Unable to complete operation due to conflict with Rx Mask VLAN */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \ UINT32_C(0x1) #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_LAST \ HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR uint8_t unused_0[7]; } __attribute__((packed)); /******************************* * hwrm_cfa_ntuple_filter_free * *******************************/ /* hwrm_cfa_ntuple_filter_free_input (size:192b/24B) */ struct hwrm_cfa_ntuple_filter_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* This value is an opaque id into CFA data structures. */ uint64_t ntuple_filter_id; } __attribute__((packed)); /* hwrm_cfa_ntuple_filter_free_output (size:128b/16B) */ struct hwrm_cfa_ntuple_filter_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************************** * hwrm_cfa_ntuple_filter_cfg * ******************************/ /* hwrm_cfa_ntuple_filter_cfg_input (size:384b/48B) */ struct hwrm_cfa_ntuple_filter_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the new_dst_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \ UINT32_C(0x1) /* * This bit must be '1' for the new_mirror_vnic_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) /* * This bit must be '1' for the new_meter_instance_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \ UINT32_C(0x4) uint8_t unused_0[4]; /* This value is an opaque id into CFA data structures. */ uint64_t ntuple_filter_id; /* * If set, this value shall represent the new * Logical VNIC ID of the destination VNIC for the RX * path and new network port id of the destination port for * the TX path. */ uint32_t new_dst_id; /* * New Logical VNIC ID of the VNIC where traffic is * mirrored. */ uint32_t new_mirror_vnic_id; /* * New meter to attach to the flow. Specifying the * invalid instance ID is used to remove any existing * meter from the flow. */ uint16_t new_meter_instance_id; /* * A value of 0xfff is considered invalid and implies the * instance is not configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \ HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID uint8_t unused_1[6]; } __attribute__((packed)); /* hwrm_cfa_ntuple_filter_cfg_output (size:128b/16B) */ struct hwrm_cfa_ntuple_filter_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_cfa_em_flow_alloc * **************************/ /* hwrm_cfa_em_flow_alloc_input (size:896b/112B) */ struct hwrm_cfa_em_flow_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX /* * Setting of this flag indicates enabling of a byte counter for a given * flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2) /* * Setting of this flag indicates enabling of a packet counter for a given * flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4) /* Setting of this flag indicates de-capsulation action for the given flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8) /* Setting of this flag indicates encapsulation action for the given flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10) /* * Setting of this flag indicates drop action. If this flag is not set, * then it should be considered accept action. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20) /* * Setting of this flag indicates that a meter is expected to be attached * to this flow. This hint can be used when choosing the action record * format required for the flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40) uint32_t enables; /* * This bit must be '1' for the l2_filter_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ UINT32_C(0x1) /* * This bit must be '1' for the tunnel_type field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x2) /* * This bit must be '1' for the tunnel_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID \ UINT32_C(0x4) /* * This bit must be '1' for the src_macaddr field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR \ UINT32_C(0x8) /* * This bit must be '1' for the dst_macaddr field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR \ UINT32_C(0x10) /* * This bit must be '1' for the ovlan_vid field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID \ UINT32_C(0x20) /* * This bit must be '1' for the ivlan_vid field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID \ UINT32_C(0x40) /* * This bit must be '1' for the ethertype field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE \ UINT32_C(0x80) /* * This bit must be '1' for the src_ipaddr field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR \ UINT32_C(0x100) /* * This bit must be '1' for the dst_ipaddr field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR \ UINT32_C(0x200) /* * This bit must be '1' for the ipaddr_type field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ UINT32_C(0x400) /* * This bit must be '1' for the ip_protocol field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ UINT32_C(0x800) /* * This bit must be '1' for the src_port field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT \ UINT32_C(0x1000) /* * This bit must be '1' for the dst_port field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT \ UINT32_C(0x2000) /* * This bit must be '1' for the dst_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID \ UINT32_C(0x4000) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x8000) /* * This bit must be '1' for the encap_record_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \ UINT32_C(0x10000) /* * This bit must be '1' for the meter_instance_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \ UINT32_C(0x20000) /* * This value identifies a set of CFA data structures used for an L2 * context. */ uint64_t l2_filter_id; /* Tunnel Type. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Any tunneled traffic */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL uint8_t unused_0[3]; /* * Tunnel identifier. * Virtual Network Identifier (VNI). Only valid with * tunnel_types VXLAN, NVGRE, and Geneve. * Only lower 24-bits of VNI field are used * in setting up the filter. */ uint32_t tunnel_id; /* * This value indicates the source MAC address in * the Ethernet header. */ uint8_t src_macaddr[6]; /* The meter instance to attach to the flow. */ uint16_t meter_instance_id; /* * A value of 0xfff is considered invalid and implies the * instance is not configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_LAST \ HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID /* * This value indicates the destination MAC address in * the Ethernet header. */ uint8_t dst_macaddr[6]; /* * This value indicates the VLAN ID of the outer VLAN tag * in the Ethernet header. */ uint16_t ovlan_vid; /* * This value indicates the VLAN ID of the inner VLAN tag * in the Ethernet header. */ uint16_t ivlan_vid; /* This value indicates the ethertype in the Ethernet header. */ uint16_t ethertype; /* * This value indicates the type of IP address. * 4 - IPv4 * 6 - IPv6 * All others are invalid. */ uint8_t ip_addr_type; /* invalid */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0) /* IPv4 */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4) /* IPv6 */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6) #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 /* * The value of protocol filed in IP header. * Applies to UDP and TCP traffic. * 6 - TCP * 17 - UDP */ uint8_t ip_protocol; /* invalid */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0) /* TCP */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6) /* UDP */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11) #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_LAST \ HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP uint8_t unused_1[2]; /* * The value of source IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t src_ipaddr[4]; /* * big_endian = True * The value of destination IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t dst_ipaddr[4]; /* * The value of source port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t src_port; /* * The value of destination port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t dst_port; /* * If set, this value shall represent the * Logical VNIC ID of the destination VNIC for the RX * path and network port id of the destination port for * the TX path. */ uint16_t dst_id; /* * Logical VNIC ID of the VNIC where traffic is * mirrored. */ uint16_t mirror_vnic_id; /* Logical ID of the encapsulation record. */ uint32_t encap_record_id; uint8_t unused_2[4]; } __attribute__((packed)); /* hwrm_cfa_em_flow_alloc_output (size:192b/24B) */ struct hwrm_cfa_em_flow_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value is an opaque id into CFA data structures. */ uint64_t em_filter_id; /* * This is the ID of the flow associated with this * filter. * This value shall be used to match and associate the * flow identifier returned in completion records. * A value of 0xFFFFFFFF shall indicate no flow id. */ uint32_t flow_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_cfa_em_flow_free * *************************/ /* hwrm_cfa_em_flow_free_input (size:192b/24B) */ struct hwrm_cfa_em_flow_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* This value is an opaque id into CFA data structures. */ uint64_t em_filter_id; } __attribute__((packed)); /* hwrm_cfa_em_flow_free_output (size:128b/16B) */ struct hwrm_cfa_em_flow_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************ * hwrm_cfa_em_flow_cfg * ************************/ /* hwrm_cfa_em_flow_cfg_input (size:384b/48B) */ struct hwrm_cfa_em_flow_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the new_dst_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_DST_ID \ UINT32_C(0x1) /* * This bit must be '1' for the new_mirror_vnic_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) /* * This bit must be '1' for the new_meter_instance_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \ UINT32_C(0x4) uint8_t unused_0[4]; /* This value is an opaque id into CFA data structures. */ uint64_t em_filter_id; /* * If set, this value shall represent the new * Logical VNIC ID of the destination VNIC for the RX * path and network port id of the destination port for * the TX path. */ uint32_t new_dst_id; /* * New Logical VNIC ID of the VNIC where traffic is * mirrored. */ uint32_t new_mirror_vnic_id; /* * New meter to attach to the flow. Specifying the * invalid instance ID is used to remove any existing * meter from the flow. */ uint16_t new_meter_instance_id; /* * A value of 0xfff is considered invalid and implies the * instance is not configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_LAST \ HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID uint8_t unused_1[6]; } __attribute__((packed)); /* hwrm_cfa_em_flow_cfg_output (size:128b/16B) */ struct hwrm_cfa_em_flow_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************** * hwrm_cfa_meter_profile_alloc * ********************************/ /* hwrm_cfa_meter_profile_alloc_input (size:320b/40B) */ struct hwrm_cfa_meter_profile_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint8_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_TX \ UINT32_C(0x0) /* rx path */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_FLAGS_PATH_RX /* The meter algorithm type. */ uint8_t meter_type; /* RFC 2697 (srTCM) */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2697 \ UINT32_C(0x0) /* RFC 2698 (trTCM) */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC2698 \ UINT32_C(0x1) /* RFC 4115 (trTCM) */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 \ UINT32_C(0x2) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_METER_TYPE_RFC4115 /* * This field is reserved for the future use. * It shall be set to 0. */ uint16_t reserved1; /* * This field is reserved for the future use. * It shall be set to 0. */ uint32_t reserved2; /* A meter rate specified in bytes-per-second. */ uint32_t commit_rate; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID /* A meter burst size specified in bytes. */ uint32_t commit_burst; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID /* A meter rate specified in bytes-per-second. */ uint32_t excess_peak_rate; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID /* A meter burst size specified in bytes. */ uint32_t excess_peak_burst; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID } __attribute__((packed)); /* hwrm_cfa_meter_profile_alloc_output (size:128b/16B) */ struct hwrm_cfa_meter_profile_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value identifies a meter profile in CFA. */ uint16_t meter_profile_id; /* * A value of 0xfff is considered invalid and implies the * profile is not configured. */ #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_LAST \ HWRM_CFA_METER_PROFILE_ALLOC_OUTPUT_METER_PROFILE_ID_INVALID uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************* * hwrm_cfa_meter_profile_free * *******************************/ /* hwrm_cfa_meter_profile_free_input (size:192b/24B) */ struct hwrm_cfa_meter_profile_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint8_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_TX \ UINT32_C(0x0) /* rx path */ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) #define HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_METER_PROFILE_FREE_INPUT_FLAGS_PATH_RX uint8_t unused_0; /* This value identifies a meter profile in CFA. */ uint16_t meter_profile_id; /* * A value of 0xfff is considered invalid and implies the * profile is not configured. */ #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_LAST \ HWRM_CFA_METER_PROFILE_FREE_INPUT_METER_PROFILE_ID_INVALID uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_cfa_meter_profile_free_output (size:128b/16B) */ struct hwrm_cfa_meter_profile_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************************** * hwrm_cfa_meter_profile_cfg * ******************************/ /* hwrm_cfa_meter_profile_cfg_input (size:320b/40B) */ struct hwrm_cfa_meter_profile_cfg_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint8_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_FLAGS_PATH_RX /* The meter algorithm type. */ uint8_t meter_type; /* RFC 2697 (srTCM) */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2697 \ UINT32_C(0x0) /* RFC 2698 (trTCM) */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC2698 \ UINT32_C(0x1) /* RFC 4115 (trTCM) */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 \ UINT32_C(0x2) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_TYPE_RFC4115 /* This value identifies a meter profile in CFA. */ uint16_t meter_profile_id; /* * A value of 0xfff is considered invalid and implies the * profile is not configured. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_METER_PROFILE_ID_INVALID /* * This field is reserved for the future use. * It shall be set to 0. */ uint32_t reserved; /* A meter rate specified in bytes-per-second. */ uint32_t commit_rate; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_RATE_BW_VALUE_UNIT_INVALID /* A meter burst size specified in bytes. */ uint32_t commit_burst; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_COMMIT_BURST_BW_VALUE_UNIT_INVALID /* A meter rate specified in bytes-per-second. */ uint32_t excess_peak_rate; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_RATE_BW_VALUE_UNIT_INVALID /* A meter burst size specified in bytes. */ uint32_t excess_peak_burst; /* The bandwidth value. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_SFT \ 0 /* The granularity of the value (bits or bytes). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE \ UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BITS \ (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_SFT \ 29 /* Value is in Mb or MB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_LAST \ HWRM_CFA_METER_PROFILE_CFG_INPUT_EXCESS_PEAK_BURST_BW_VALUE_UNIT_INVALID } __attribute__((packed)); /* hwrm_cfa_meter_profile_cfg_output (size:128b/16B) */ struct hwrm_cfa_meter_profile_cfg_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************************* * hwrm_cfa_meter_instance_alloc * *********************************/ /* hwrm_cfa_meter_instance_alloc_input (size:192b/24B) */ struct hwrm_cfa_meter_instance_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint8_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH \ UINT32_C(0x1) /* tx path */ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_TX \ UINT32_C(0x0) /* rx path */ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_FLAGS_PATH_RX uint8_t unused_0; /* This value identifies a meter profile in CFA. */ uint16_t meter_profile_id; /* * A value of 0xfff is considered invalid and implies the * profile is not configured. */ #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_LAST \ HWRM_CFA_METER_INSTANCE_ALLOC_INPUT_METER_PROFILE_ID_INVALID uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_cfa_meter_instance_alloc_output (size:128b/16B) */ struct hwrm_cfa_meter_instance_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value identifies a meter instance in CFA. */ uint16_t meter_instance_id; /* * A value of 0xfff is considered invalid and implies the * instance is not configured. */ #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_LAST \ HWRM_CFA_METER_INSTANCE_ALLOC_OUTPUT_METER_INSTANCE_ID_INVALID uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************** * hwrm_cfa_meter_instance_free * ********************************/ /* hwrm_cfa_meter_instance_free_input (size:192b/24B) */ struct hwrm_cfa_meter_instance_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint8_t flags; /* * Enumeration denoting the RX, TX type of the resource. * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_TX \ UINT32_C(0x0) /* rx path */ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX \ UINT32_C(0x1) #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_LAST \ HWRM_CFA_METER_INSTANCE_FREE_INPUT_FLAGS_PATH_RX uint8_t unused_0; /* This value identifies a meter instance in CFA. */ uint16_t meter_instance_id; /* * A value of 0xfff is considered invalid and implies the * instance is not configured. */ #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) #define HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_LAST \ HWRM_CFA_METER_INSTANCE_FREE_INPUT_METER_INSTANCE_ID_INVALID uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_cfa_meter_instance_free_output (size:128b/16B) */ struct hwrm_cfa_meter_instance_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************************* * hwrm_cfa_decap_filter_alloc * *******************************/ /* hwrm_cfa_decap_filter_alloc_input (size:832b/104B) */ struct hwrm_cfa_decap_filter_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* ovs_tunnel is 1 b */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_FLAGS_OVS_TUNNEL \ UINT32_C(0x1) uint32_t enables; /* * This bit must be '1' for the tunnel_type field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x1) /* * This bit must be '1' for the tunnel_id field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_ID \ UINT32_C(0x2) /* * This bit must be '1' for the src_macaddr field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \ UINT32_C(0x4) /* * This bit must be '1' for the dst_macaddr field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ UINT32_C(0x8) /* * This bit must be '1' for the ovlan_vid field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_OVLAN_VID \ UINT32_C(0x10) /* * This bit must be '1' for the ivlan_vid field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IVLAN_VID \ UINT32_C(0x20) /* * This bit must be '1' for the t_ovlan_vid field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_OVLAN_VID \ UINT32_C(0x40) /* * This bit must be '1' for the t_ivlan_vid field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_T_IVLAN_VID \ UINT32_C(0x80) /* * This bit must be '1' for the ethertype field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \ UINT32_C(0x100) /* * This bit must be '1' for the src_ipaddr field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \ UINT32_C(0x200) /* * This bit must be '1' for the dst_ipaddr field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \ UINT32_C(0x400) /* * This bit must be '1' for the ipaddr_type field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ UINT32_C(0x800) /* * This bit must be '1' for the ip_protocol field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ UINT32_C(0x1000) /* * This bit must be '1' for the src_port field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \ UINT32_C(0x2000) /* * This bit must be '1' for the dst_port field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \ UINT32_C(0x4000) /* * This bit must be '1' for the dst_id field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ UINT32_C(0x8000) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x10000) /* * Tunnel identifier. * Virtual Network Identifier (VNI). Only valid with * tunnel_types VXLAN, NVGRE, and Geneve. * Only lower 24-bits of VNI field are used * in setting up the filter. */ uint32_t tunnel_id; /* Tunnel Type. */ uint8_t tunnel_type; /* Non-tunnel */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Network Virtualization Generic Routing Encapsulation (NVGRE) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* Generic Routing Encapsulation (GRE) inside Ethernet payload */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT \ UINT32_C(0x7) /* Generic Routing Encapsulation (GRE) inside IP datagram payload */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Any tunneled traffic */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_LAST \ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL uint8_t unused_0; uint16_t unused_1; /* * This value indicates the source MAC address in * the Ethernet header. */ uint8_t src_macaddr[6]; uint8_t unused_2[2]; /* * This value indicates the destination MAC address in * the Ethernet header. */ uint8_t dst_macaddr[6]; /* * This value indicates the VLAN ID of the outer VLAN tag * in the Ethernet header. */ uint16_t ovlan_vid; /* * This value indicates the VLAN ID of the inner VLAN tag * in the Ethernet header. */ uint16_t ivlan_vid; /* * This value indicates the VLAN ID of the outer VLAN tag * in the tunnel Ethernet header. */ uint16_t t_ovlan_vid; /* * This value indicates the VLAN ID of the inner VLAN tag * in the tunnel Ethernet header. */ uint16_t t_ivlan_vid; /* This value indicates the ethertype in the Ethernet header. */ uint16_t ethertype; /* * This value indicates the type of IP address. * 4 - IPv4 * 6 - IPv6 * All others are invalid. */ uint8_t ip_addr_type; /* invalid */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \ UINT32_C(0x0) /* IPv4 */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \ UINT32_C(0x4) /* IPv6 */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \ UINT32_C(0x6) #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_LAST \ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 /* * The value of protocol filed in IP header. * Applies to UDP and TCP traffic. * 6 - TCP * 17 - UDP */ uint8_t ip_protocol; /* invalid */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \ UINT32_C(0x0) /* TCP */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \ UINT32_C(0x6) /* UDP */ #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \ UINT32_C(0x11) #define HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_LAST \ HWRM_CFA_DECAP_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP uint16_t unused_3; uint32_t unused_4; /* * The value of source IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t src_ipaddr[4]; /* * The value of destination IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t dst_ipaddr[4]; /* * The value of source port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t src_port; /* * The value of destination port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t dst_port; /* * If set, this value shall represent the * Logical VNIC ID of the destination VNIC for the RX * path. */ uint16_t dst_id; /* * If set, this value shall represent the L2 context that matches the L2 * information of the decap filter. */ uint16_t l2_ctxt_ref_id; } __attribute__((packed)); /* hwrm_cfa_decap_filter_alloc_output (size:128b/16B) */ struct hwrm_cfa_decap_filter_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This value is an opaque id into CFA data structures. */ uint32_t decap_filter_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************************** * hwrm_cfa_decap_filter_free * ******************************/ /* hwrm_cfa_decap_filter_free_input (size:192b/24B) */ struct hwrm_cfa_decap_filter_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* This value is an opaque id into CFA data structures. */ uint32_t decap_filter_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_cfa_decap_filter_free_output (size:128b/16B) */ struct hwrm_cfa_decap_filter_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_cfa_flow_alloc * ***********************/ /* hwrm_cfa_flow_alloc_input (size:1024b/128B) */ struct hwrm_cfa_flow_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint16_t flags; /* tunnel is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_TUNNEL UINT32_C(0x1) /* num_vlan is 2 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_MASK UINT32_C(0x6) #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_SFT 1 /* no tags */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_NONE \ (UINT32_C(0x0) << 1) /* 1 tag */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_ONE \ (UINT32_C(0x1) << 1) /* 2 tags */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO \ (UINT32_C(0x2) << 1) #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_LAST \ HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_NUM_VLAN_TWO /* Enumeration denoting the Flow Type. */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_MASK UINT32_C(0x38) #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_SFT 3 /* L2 flow */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_L2 \ (UINT32_C(0x0) << 3) /* IPV4 flow */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV4 \ (UINT32_C(0x1) << 3) /* IPV6 flow */ #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 \ (UINT32_C(0x2) << 3) #define HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_LAST \ HWRM_CFA_FLOW_ALLOC_INPUT_FLAGS_FLOWTYPE_IPV6 /* * Tx Flow: vf fid. * Rx Flow: pf fid. */ uint16_t src_fid; /* Tunnel handle valid when tunnel flag is set. */ uint32_t tunnel_handle; uint16_t action_flags; /* * Setting of this flag indicates drop action. If this flag is not set, * then it should be considered accept action. */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_FWD \ UINT32_C(0x1) /* recycle is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_RECYCLE \ UINT32_C(0x2) /* * Setting of this flag indicates drop action. If this flag is not set, * then it should be considered accept action. */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_DROP \ UINT32_C(0x4) /* meter is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_METER \ UINT32_C(0x8) /* tunnel is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TUNNEL \ UINT32_C(0x10) /* nat_src is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_SRC \ UINT32_C(0x20) /* nat_dest is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_DEST \ UINT32_C(0x40) /* nat_ipv4_address is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_NAT_IPV4_ADDRESS \ UINT32_C(0x80) /* l2_header_rewrite is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_L2_HEADER_REWRITE \ UINT32_C(0x100) /* ttl_decrement is 1 b */ #define HWRM_CFA_FLOW_ALLOC_INPUT_ACTION_FLAGS_TTL_DECREMENT \ UINT32_C(0x200) /* * Tx Flow: pf or vf fid. * Rx Flow: vf fid. */ uint16_t dst_fid; /* VLAN tpid, valid when push_vlan flag is set. */ uint16_t l2_rewrite_vlan_tpid; /* VLAN tci, valid when push_vlan flag is set. */ uint16_t l2_rewrite_vlan_tci; /* Meter id, valid when meter flag is set. */ uint16_t act_meter_id; /* Flow with the same l2 context tcam key. */ uint16_t ref_flow_handle; /* This value sets the match value for the ethertype. */ uint16_t ethertype; /* valid when num tags is 1 or 2. */ uint16_t outer_vlan_tci; /* This value sets the match value for the Destination MAC address. */ uint16_t dmac[3]; /* valid when num tags is 2. */ uint16_t inner_vlan_tci; /* This value sets the match value for the Source MAC address. */ uint16_t smac[3]; /* The bit length of destination IP address mask. */ uint8_t ip_dst_mask_len; /* The bit length of source IP address mask. */ uint8_t ip_src_mask_len; /* The value of destination IPv4/IPv6 address. */ uint32_t ip_dst[4]; /* The source IPv4/IPv6 address. */ uint32_t ip_src[4]; /* * The value of source port. * Applies to UDP and TCP traffic. */ uint16_t l4_src_port; /* * The value of source port mask. * Applies to UDP and TCP traffic. */ uint16_t l4_src_port_mask; /* * The value of destination port. * Applies to UDP and TCP traffic. */ uint16_t l4_dst_port; /* * The value of destination port mask. * Applies to UDP and TCP traffic. */ uint16_t l4_dst_port_mask; /* * NAT IPv4/6 address based on address type flag. * 0 values are ignored. */ uint32_t nat_ip_address[4]; /* L2 header re-write Destination MAC address. */ uint16_t l2_rewrite_dmac[3]; /* * The NAT source/destination port based on direction flag. * Applies to UDP and TCP traffic. * 0 values are ignored. */ uint16_t nat_port; /* L2 header re-write Source MAC address. */ uint16_t l2_rewrite_smac[3]; /* The value of ip protocol. */ uint8_t ip_proto; uint8_t unused_0; } __attribute__((packed)); /* hwrm_cfa_flow_alloc_output (size:128b/16B) */ struct hwrm_cfa_flow_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Flow record index. */ uint16_t flow_handle; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_cfa_flow_free * **********************/ /* hwrm_cfa_flow_free_input (size:192b/24B) */ struct hwrm_cfa_flow_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Flow record index. */ uint16_t flow_handle; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_cfa_flow_free_output (size:256b/32B) */ struct hwrm_cfa_flow_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* packet is 64 b */ uint64_t packet; /* byte is 64 b */ uint64_t byte; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_cfa_flow_info * **********************/ /* hwrm_cfa_flow_info_input (size:192b/24B) */ struct hwrm_cfa_flow_info_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Flow record index. */ uint16_t flow_handle; /* Max flow handle */ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_MASK \ UINT32_C(0xfff) #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_MAX_SFT 0 /* CNP flow handle */ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_CNP_CNT \ UINT32_C(0x1000) /* Direction rx = 1 */ #define HWRM_CFA_FLOW_INFO_INPUT_FLOW_HANDLE_DIR_RX \ UINT32_C(0x8000) uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_cfa_flow_info_output (size:448b/56B) */ struct hwrm_cfa_flow_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* flags is 8 b */ uint8_t flags; /* profile is 8 b */ uint8_t profile; /* src_fid is 16 b */ uint16_t src_fid; /* dst_fid is 16 b */ uint16_t dst_fid; /* l2_ctxt_id is 16 b */ uint16_t l2_ctxt_id; /* em_info is 64 b */ uint64_t em_info; /* tcam_info is 64 b */ uint64_t tcam_info; /* vfp_tcam_info is 64 b */ uint64_t vfp_tcam_info; /* ar_id is 16 b */ uint16_t ar_id; /* flow_handle is 16 b */ uint16_t flow_handle; /* tunnel_handle is 32 b */ uint32_t tunnel_handle; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_cfa_flow_flush * ***********************/ /* hwrm_cfa_flow_flush_input (size:192b/24B) */ struct hwrm_cfa_flow_flush_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_cfa_flow_flush_output (size:128b/16B) */ struct hwrm_cfa_flow_flush_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_cfa_flow_stats * ***********************/ /* hwrm_cfa_flow_stats_input (size:320b/40B) */ struct hwrm_cfa_flow_stats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Flow handle. */ uint16_t num_flows; /* Flow handle. */ uint16_t flow_handle_0; /* Flow handle. */ uint16_t flow_handle_1; /* Flow handle. */ uint16_t flow_handle_2; /* Flow handle. */ uint16_t flow_handle_3; /* Flow handle. */ uint16_t flow_handle_4; /* Flow handle. */ uint16_t flow_handle_5; /* Flow handle. */ uint16_t flow_handle_6; /* Flow handle. */ uint16_t flow_handle_7; /* Flow handle. */ uint16_t flow_handle_8; /* Flow handle. */ uint16_t flow_handle_9; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_cfa_flow_stats_output (size:1408b/176B) */ struct hwrm_cfa_flow_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* packet_0 is 64 b */ uint64_t packet_0; /* packet_1 is 64 b */ uint64_t packet_1; /* packet_2 is 64 b */ uint64_t packet_2; /* packet_3 is 64 b */ uint64_t packet_3; /* packet_4 is 64 b */ uint64_t packet_4; /* packet_5 is 64 b */ uint64_t packet_5; /* packet_6 is 64 b */ uint64_t packet_6; /* packet_7 is 64 b */ uint64_t packet_7; /* packet_8 is 64 b */ uint64_t packet_8; /* packet_9 is 64 b */ uint64_t packet_9; /* byte_0 is 64 b */ uint64_t byte_0; /* byte_1 is 64 b */ uint64_t byte_1; /* byte_2 is 64 b */ uint64_t byte_2; /* byte_3 is 64 b */ uint64_t byte_3; /* byte_4 is 64 b */ uint64_t byte_4; /* byte_5 is 64 b */ uint64_t byte_5; /* byte_6 is 64 b */ uint64_t byte_6; /* byte_7 is 64 b */ uint64_t byte_7; /* byte_8 is 64 b */ uint64_t byte_8; /* byte_9 is 64 b */ uint64_t byte_9; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_cfa_vf_pair_alloc * **************************/ /* hwrm_cfa_vf_pair_alloc_input (size:448b/56B) */ struct hwrm_cfa_vf_pair_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Logical VF number (range: 0 -> MAX_VFS -1). */ uint16_t vf_a_id; /* Logical VF number (range: 0 -> MAX_VFS -1). */ uint16_t vf_b_id; uint8_t unused_0[4]; /* VF Pair name (32 byte string). */ char pair_name[32]; } __attribute__((packed)); /* hwrm_cfa_vf_pair_alloc_output (size:128b/16B) */ struct hwrm_cfa_vf_pair_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_cfa_vf_pair_free * *************************/ /* hwrm_cfa_vf_pair_free_input (size:384b/48B) */ struct hwrm_cfa_vf_pair_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* VF Pair name (32 byte string). */ char pair_name[32]; } __attribute__((packed)); /* hwrm_cfa_vf_pair_free_output (size:128b/16B) */ struct hwrm_cfa_vf_pair_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_cfa_vf_pair_info * *************************/ /* hwrm_cfa_vf_pair_info_input (size:448b/56B) */ struct hwrm_cfa_vf_pair_info_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* If this flag is set, lookup by name else lookup by index. */ #define HWRM_CFA_VF_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) /* vf pair table index. */ uint16_t vf_pair_index; uint8_t unused_0[2]; /* VF Pair name (32 byte string). */ char vf_pair_name[32]; } __attribute__((packed)); /* hwrm_cfa_vf_pair_info_output (size:512b/64B) */ struct hwrm_cfa_vf_pair_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* vf pair table index. */ uint16_t next_vf_pair_index; /* vf pair member a's vf_fid. */ uint16_t vf_a_fid; /* vf pair member a's Linux logical VF number. */ uint16_t vf_a_index; /* vf pair member b's vf_fid. */ uint16_t vf_b_fid; /* vf pair member a's Linux logical VF number. */ uint16_t vf_b_index; /* vf pair state. */ uint8_t pair_state; /* Pair has been allocated */ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1) /* Both pair members are active */ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2) #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \ HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE uint8_t unused_0[5]; /* VF Pair name (32 byte string). */ char pair_name[32]; uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_cfa_pair_alloc * ***********************/ /* hwrm_cfa_pair_alloc_input (size:576b/72B) */ struct hwrm_cfa_pair_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair, 5-rep2fn_mod). */ uint8_t pair_mode; /* Pair between VF on local host with PF or VF on specified host. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_VF2FN UINT32_C(0x0) /* Pair between REP on local host with PF or VF on specified host. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN UINT32_C(0x1) /* Pair between REP on local host with REP on specified host. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2REP UINT32_C(0x2) /* Pair for the proxy interface. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PROXY UINT32_C(0x3) /* Pair for the PF interface. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PFPAIR UINT32_C(0x4) /* Modify exiting rep2fn pair and move pair to new PF. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MOD UINT32_C(0x5) /* Modify exiting rep2fn pairs paired with same PF and move pairs to new PF. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL UINT32_C(0x6) #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_LAST \ HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL uint8_t unused_0; /* Logical VF number (range: 0 -> MAX_VFS -1). */ uint16_t vf_a_id; /* Logical Host (0xff-local host). */ uint8_t host_b_id; /* Logical PF (0xff-PF for command channel). */ uint8_t pf_b_id; /* Logical VF number (range: 0 -> MAX_VFS -1). */ uint16_t vf_b_id; /* Loopback port (0xff-internal loopback), valid for mode-3. */ uint8_t port_id; /* Priority used for encap of loopback packets valid for mode-3. */ uint8_t pri; /* New PF for rep2fn modify, valid for mode 5. */ uint16_t new_pf_fid; uint32_t enables; /* * This bit must be '1' for the q_ab field to be * configured. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_AB_VALID UINT32_C(0x1) /* * This bit must be '1' for the q_ba field to be * configured. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_BA_VALID UINT32_C(0x2) /* * This bit must be '1' for the fc_ab field to be * configured. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_AB_VALID UINT32_C(0x4) /* * This bit must be '1' for the fc_ba field to be * configured. */ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_BA_VALID UINT32_C(0x8) /* VF Pair name (32 byte string). */ char pair_name[32]; /* * The q_ab value specifies the logical index of the TX/RX CoS * queue to be assigned for traffic in the A to B direction of * the interface pair. The default value is 0. */ uint8_t q_ab; /* * The q_ba value specifies the logical index of the TX/RX CoS * queue to be assigned for traffic in the B to A direction of * the interface pair. The default value is 1. */ uint8_t q_ba; /* * Specifies whether RX ring flow control is disabled (0) or enabled * (1) in the A to B direction. The default value is 0, meaning that * packets will be dropped when the B-side RX rings are full. */ uint8_t fc_ab; /* * Specifies whether RX ring flow control is disabled (0) or enabled * (1) in the B to A direction. The default value is 1, meaning that * the RX CoS queue will be flow controlled when the A-side RX rings * are full. */ uint8_t fc_ba; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_cfa_pair_alloc_output (size:192b/24B) */ struct hwrm_cfa_pair_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Only valid for modes 1 and 2. */ uint16_t rx_cfa_code_a; /* Only valid for modes 1 and 2. */ uint16_t tx_cfa_action_a; /* Only valid for mode 2. */ uint16_t rx_cfa_code_b; /* Only valid for mode 2. */ uint16_t tx_cfa_action_b; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_cfa_pair_free * **********************/ /* hwrm_cfa_pair_free_input (size:384b/48B) */ struct hwrm_cfa_pair_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* VF Pair name (32 byte string). */ char pair_name[32]; } __attribute__((packed)); /* hwrm_cfa_pair_free_output (size:128b/16B) */ struct hwrm_cfa_pair_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_cfa_pair_info * **********************/ /* hwrm_cfa_pair_info_input (size:448b/56B) */ struct hwrm_cfa_pair_info_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t flags; /* If this flag is set, lookup by name else lookup by index. */ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1) /* If this flag is set, lookup by PF id and VF id. */ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2) /* Pair table index. */ uint16_t pair_index; /* Pair pf index. */ uint8_t pair_pfid; /* Pair vf index. */ uint8_t pair_vfid; /* Pair name (32 byte string). */ char pair_name[32]; } __attribute__((packed)); /* hwrm_cfa_pair_info_output (size:576b/72B) */ struct hwrm_cfa_pair_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Pair table index. */ uint16_t next_pair_index; /* Pair member a's fid. */ uint16_t a_fid; /* Logical host number. */ uint8_t host_a_index; /* Logical PF number. */ uint8_t pf_a_index; /* Pair member a's Linux logical VF number. */ uint16_t vf_a_index; /* Rx CFA code. */ uint16_t rx_cfa_code_a; /* Tx CFA action. */ uint16_t tx_cfa_action_a; /* Pair member b's fid. */ uint16_t b_fid; /* Logical host number. */ uint8_t host_b_index; /* Logical PF number. */ uint8_t pf_b_index; /* Pair member a's Linux logical VF number. */ uint16_t vf_b_index; /* Rx CFA code. */ uint16_t rx_cfa_code_b; /* Tx CFA action. */ uint16_t tx_cfa_action_b; /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */ uint8_t pair_mode; /* Pair between VF on local host with PF or VF on specified host. */ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0) /* Pair between REP on local host with PF or VF on specified host. */ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1) /* Pair between REP on local host with REP on specified host. */ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2) /* Pair for the proxy interface. */ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3) /* Pair for the PF interface. */ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4) #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR /* Pair state. */ uint8_t pair_state; /* Pair has been allocated */ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1) /* Both pair members are active */ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2) #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE /* Pair name (32 byte string). */ char pair_name[32]; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_cfa_vfr_alloc * **********************/ /* hwrm_cfa_vfr_alloc_input (size:448b/56B) */ struct hwrm_cfa_vfr_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Logical VF number (range: 0 -> MAX_VFS -1). */ uint16_t vf_id; /* * This field is reserved for the future use. * It shall be set to 0. */ uint16_t reserved; uint8_t unused_0[4]; /* VF Representor name (32 byte string). */ char vfr_name[32]; } __attribute__((packed)); /* hwrm_cfa_vfr_alloc_output (size:128b/16B) */ struct hwrm_cfa_vfr_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Rx CFA code. */ uint16_t rx_cfa_code; /* Tx CFA action. */ uint16_t tx_cfa_action; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_cfa_vfr_free * *********************/ /* hwrm_cfa_vfr_free_input (size:384b/48B) */ struct hwrm_cfa_vfr_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* VF Representor name (32 byte string). */ char vfr_name[32]; } __attribute__((packed)); /* hwrm_cfa_vfr_free_output (size:128b/16B) */ struct hwrm_cfa_vfr_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************************** * hwrm_tunnel_dst_port_query * ******************************/ /* hwrm_tunnel_dst_port_query_input (size:192b/24B) */ struct hwrm_tunnel_dst_port_query_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Tunnel Type. */ uint8_t tunnel_type; /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 \ UINT32_C(0xa) #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \ HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 uint8_t unused_0[7]; } __attribute__((packed)); /* hwrm_tunnel_dst_port_query_output (size:128b/16B) */ struct hwrm_tunnel_dst_port_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * This field represents the identifier of L4 destination port * used for the given tunnel type. This field is valid for * specific tunnel types that use layer 4 (e.g. UDP) * transports for tunneling. */ uint16_t tunnel_dst_port_id; /* * This field represents the value of L4 destination port * identified by tunnel_dst_port_id. This field is valid for * specific tunnel types that use layer 4 (e.g. UDP) * transports for tunneling. * This field is in network byte order. * * A value of 0 means that the destination port is not * configured. */ uint16_t tunnel_dst_port_val; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************************** * hwrm_tunnel_dst_port_alloc * ******************************/ /* hwrm_tunnel_dst_port_alloc_input (size:192b/24B) */ struct hwrm_tunnel_dst_port_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Tunnel Type. */ uint8_t tunnel_type; /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \ UINT32_C(0xa) #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_LAST \ HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 uint8_t unused_0; /* * This field represents the value of L4 destination port used * for the given tunnel type. This field is valid for * specific tunnel types that use layer 4 (e.g. UDP) * transports for tunneling. * * This field is in network byte order. * * A value of 0 shall fail the command. */ uint16_t tunnel_dst_port_val; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */ struct hwrm_tunnel_dst_port_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * Identifier of a tunnel L4 destination port value. Only applies to tunnel * types that has l4 destination port parameters. */ uint16_t tunnel_dst_port_id; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************************** * hwrm_tunnel_dst_port_free * *****************************/ /* hwrm_tunnel_dst_port_free_input (size:192b/24B) */ struct hwrm_tunnel_dst_port_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Tunnel Type. */ uint8_t tunnel_type; /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \ UINT32_C(0xa) #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_LAST \ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 uint8_t unused_0; /* * Identifier of a tunnel L4 destination port value. Only applies to tunnel * types that has l4 destination port parameters. */ uint16_t tunnel_dst_port_id; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_tunnel_dst_port_free_output (size:128b/16B) */ struct hwrm_tunnel_dst_port_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_1[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* ctx_hw_stats (size:1280b/160B) */ struct ctx_hw_stats { /* Number of received unicast packets */ uint64_t rx_ucast_pkts; /* Number of received multicast packets */ uint64_t rx_mcast_pkts; /* Number of received broadcast packets */ uint64_t rx_bcast_pkts; /* Number of discarded packets on received path */ uint64_t rx_discard_pkts; /* Number of dropped packets on received path */ uint64_t rx_drop_pkts; /* Number of received bytes for unicast traffic */ uint64_t rx_ucast_bytes; /* Number of received bytes for multicast traffic */ uint64_t rx_mcast_bytes; /* Number of received bytes for broadcast traffic */ uint64_t rx_bcast_bytes; /* Number of transmitted unicast packets */ uint64_t tx_ucast_pkts; /* Number of transmitted multicast packets */ uint64_t tx_mcast_pkts; /* Number of transmitted broadcast packets */ uint64_t tx_bcast_pkts; /* Number of discarded packets on transmit path */ uint64_t tx_discard_pkts; /* Number of dropped packets on transmit path */ uint64_t tx_drop_pkts; /* Number of transmitted bytes for unicast traffic */ uint64_t tx_ucast_bytes; /* Number of transmitted bytes for multicast traffic */ uint64_t tx_mcast_bytes; /* Number of transmitted bytes for broadcast traffic */ uint64_t tx_bcast_bytes; /* Number of TPA packets */ uint64_t tpa_pkts; /* Number of TPA bytes */ uint64_t tpa_bytes; /* Number of TPA events */ uint64_t tpa_events; /* Number of TPA aborts */ uint64_t tpa_aborts; } __attribute__((packed)); /*********************** * hwrm_stat_ctx_alloc * ***********************/ /* hwrm_stat_ctx_alloc_input (size:256b/32B) */ struct hwrm_stat_ctx_alloc_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* This is the address for statistic block. */ uint64_t stats_dma_addr; /* * The statistic block update period in ms. * e.g. 250ms, 500ms, 750ms, 1000ms. * If update_period_ms is 0, then the stats update * shall be never done and the DMA address shall not be used. * In this case, the stat block can only be read by * hwrm_stat_ctx_query command. */ uint32_t update_period_ms; /* * This field is used to specify statistics context specific * configuration flags. */ uint8_t stat_ctx_flags; /* * When this bit is set to '1', the statistics context shall be * allocated for RoCE traffic only. In this case, traffic other * than offloaded RoCE traffic shall not be included in this * statistic context. * When this bit is set to '0', the statistics context shall be * used for the network traffic other than offloaded RoCE traffic. */ #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1) uint8_t unused_0[3]; } __attribute__((packed)); /* hwrm_stat_ctx_alloc_output (size:128b/16B) */ struct hwrm_stat_ctx_alloc_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This is the statistics context ID value. */ uint32_t stat_ctx_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************** * hwrm_stat_ctx_free * **********************/ /* hwrm_stat_ctx_free_input (size:192b/24B) */ struct hwrm_stat_ctx_free_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* ID of the statistics context that is being queried. */ uint32_t stat_ctx_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_stat_ctx_free_output (size:128b/16B) */ struct hwrm_stat_ctx_free_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* This is the statistics context ID value. */ uint32_t stat_ctx_id; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*********************** * hwrm_stat_ctx_query * ***********************/ /* hwrm_stat_ctx_query_input (size:192b/24B) */ struct hwrm_stat_ctx_query_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* ID of the statistics context that is being queried. */ uint32_t stat_ctx_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_stat_ctx_query_output (size:1408b/176B) */ struct hwrm_stat_ctx_query_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Number of transmitted unicast packets */ uint64_t tx_ucast_pkts; /* Number of transmitted multicast packets */ uint64_t tx_mcast_pkts; /* Number of transmitted broadcast packets */ uint64_t tx_bcast_pkts; /* Number of transmitted packets with error */ uint64_t tx_err_pkts; /* Number of dropped packets on transmit path */ uint64_t tx_drop_pkts; /* Number of transmitted bytes for unicast traffic */ uint64_t tx_ucast_bytes; /* Number of transmitted bytes for multicast traffic */ uint64_t tx_mcast_bytes; /* Number of transmitted bytes for broadcast traffic */ uint64_t tx_bcast_bytes; /* Number of received unicast packets */ uint64_t rx_ucast_pkts; /* Number of received multicast packets */ uint64_t rx_mcast_pkts; /* Number of received broadcast packets */ uint64_t rx_bcast_pkts; /* Number of received packets with error */ uint64_t rx_err_pkts; /* Number of dropped packets on received path */ uint64_t rx_drop_pkts; /* Number of received bytes for unicast traffic */ uint64_t rx_ucast_bytes; /* Number of received bytes for multicast traffic */ uint64_t rx_mcast_bytes; /* Number of received bytes for broadcast traffic */ uint64_t rx_bcast_bytes; /* Number of aggregated unicast packets */ uint64_t rx_agg_pkts; /* Number of aggregated unicast bytes */ uint64_t rx_agg_bytes; /* Number of aggregation events */ uint64_t rx_agg_events; /* Number of aborted aggregations */ uint64_t rx_agg_aborts; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_stat_ctx_clr_stats * ***************************/ /* hwrm_stat_ctx_clr_stats_input (size:192b/24B) */ struct hwrm_stat_ctx_clr_stats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* ID of the statistics context that is being queried. */ uint32_t stat_ctx_id; uint8_t unused_0[4]; } __attribute__((packed)); /* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */ struct hwrm_stat_ctx_clr_stats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /******************** * hwrm_pcie_qstats * ********************/ /* hwrm_pcie_qstats_input (size:256b/32B) */ struct hwrm_pcie_qstats_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * The size of PCIe statistics block in bytes. * Firmware will DMA the PCIe statistics to * the host with this field size in the response. */ uint16_t pcie_stat_size; uint8_t unused_0[6]; /* * This is the host address where * PCIe statistics will be stored */ uint64_t pcie_stat_host_addr; } __attribute__((packed)); /* hwrm_pcie_qstats_output (size:128b/16B) */ struct hwrm_pcie_qstats_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* The size of PCIe statistics block in bytes. */ uint16_t pcie_stat_size; uint8_t unused_0[5]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* Port Tx Statistics Formats */ /* tx_port_stats (size:3264b/408B) */ struct tx_port_stats { /* Total Number of 64 Bytes frames transmitted */ uint64_t tx_64b_frames; /* Total Number of 65-127 Bytes frames transmitted */ uint64_t tx_65b_127b_frames; /* Total Number of 128-255 Bytes frames transmitted */ uint64_t tx_128b_255b_frames; /* Total Number of 256-511 Bytes frames transmitted */ uint64_t tx_256b_511b_frames; /* Total Number of 512-1023 Bytes frames transmitted */ uint64_t tx_512b_1023b_frames; /* Total Number of 1024-1518 Bytes frames transmitted */ uint64_t tx_1024b_1518_frames; /* * Total Number of each good VLAN (exludes FCS errors) * frame transmitted which is 1519 to 1522 bytes in length * inclusive (excluding framing bits but including FCS bytes). */ uint64_t tx_good_vlan_frames; /* Total Number of 1519-2047 Bytes frames transmitted */ uint64_t tx_1519b_2047_frames; /* Total Number of 2048-4095 Bytes frames transmitted */ uint64_t tx_2048b_4095b_frames; /* Total Number of 4096-9216 Bytes frames transmitted */ uint64_t tx_4096b_9216b_frames; /* Total Number of 9217-16383 Bytes frames transmitted */ uint64_t tx_9217b_16383b_frames; /* Total Number of good frames transmitted */ uint64_t tx_good_frames; /* Total Number of frames transmitted */ uint64_t tx_total_frames; /* Total number of unicast frames transmitted */ uint64_t tx_ucast_frames; /* Total number of multicast frames transmitted */ uint64_t tx_mcast_frames; /* Total number of broadcast frames transmitted */ uint64_t tx_bcast_frames; /* Total number of PAUSE control frames transmitted */ uint64_t tx_pause_frames; /* * Total number of PFC/per-priority PAUSE * control frames transmitted */ uint64_t tx_pfc_frames; /* Total number of jabber frames transmitted */ uint64_t tx_jabber_frames; /* Total number of frames transmitted with FCS error */ uint64_t tx_fcs_err_frames; /* Total number of control frames transmitted */ uint64_t tx_control_frames; /* Total number of over-sized frames transmitted */ uint64_t tx_oversz_frames; /* Total number of frames with single deferral */ uint64_t tx_single_dfrl_frames; /* Total number of frames with multiple deferrals */ uint64_t tx_multi_dfrl_frames; /* Total number of frames with single collision */ uint64_t tx_single_coll_frames; /* Total number of frames with multiple collisions */ uint64_t tx_multi_coll_frames; /* Total number of frames with late collisions */ uint64_t tx_late_coll_frames; /* Total number of frames with excessive collisions */ uint64_t tx_excessive_coll_frames; /* Total number of fragmented frames transmitted */ uint64_t tx_frag_frames; /* Total number of transmit errors */ uint64_t tx_err; /* Total number of single VLAN tagged frames transmitted */ uint64_t tx_tagged_frames; /* Total number of double VLAN tagged frames transmitted */ uint64_t tx_dbl_tagged_frames; /* Total number of runt frames transmitted */ uint64_t tx_runt_frames; /* Total number of TX FIFO under runs */ uint64_t tx_fifo_underruns; /* * Total number of PFC frames with PFC enabled bit for * Pri 0 transmitted */ uint64_t tx_pfc_ena_frames_pri0; /* * Total number of PFC frames with PFC enabled bit for * Pri 1 transmitted */ uint64_t tx_pfc_ena_frames_pri1; /* * Total number of PFC frames with PFC enabled bit for * Pri 2 transmitted */ uint64_t tx_pfc_ena_frames_pri2; /* * Total number of PFC frames with PFC enabled bit for * Pri 3 transmitted */ uint64_t tx_pfc_ena_frames_pri3; /* * Total number of PFC frames with PFC enabled bit for * Pri 4 transmitted */ uint64_t tx_pfc_ena_frames_pri4; /* * Total number of PFC frames with PFC enabled bit for * Pri 5 transmitted */ uint64_t tx_pfc_ena_frames_pri5; /* * Total number of PFC frames with PFC enabled bit for * Pri 6 transmitted */ uint64_t tx_pfc_ena_frames_pri6; /* * Total number of PFC frames with PFC enabled bit for * Pri 7 transmitted */ uint64_t tx_pfc_ena_frames_pri7; /* Total number of EEE LPI Events on TX */ uint64_t tx_eee_lpi_events; /* EEE LPI Duration Counter on TX */ uint64_t tx_eee_lpi_duration; /* * Total number of Link Level Flow Control (LLFC) messages * transmitted */ uint64_t tx_llfc_logical_msgs; /* Total number of HCFC messages transmitted */ uint64_t tx_hcfc_msgs; /* Total number of TX collisions */ uint64_t tx_total_collisions; /* Total number of transmitted bytes */ uint64_t tx_bytes; /* Total number of end-to-end HOL frames */ uint64_t tx_xthol_frames; /* Total Tx Drops per Port reported by STATS block */ uint64_t tx_stat_discard; /* Total Tx Error Drops per Port reported by STATS block */ uint64_t tx_stat_error; } __attribute__((packed)); /* Port Rx Statistics Formats */ /* rx_port_stats (size:4224b/528B) */ struct rx_port_stats { /* Total Number of 64 Bytes frames received */ uint64_t rx_64b_frames; /* Total Number of 65-127 Bytes frames received */ uint64_t rx_65b_127b_frames; /* Total Number of 128-255 Bytes frames received */ uint64_t rx_128b_255b_frames; /* Total Number of 256-511 Bytes frames received */ uint64_t rx_256b_511b_frames; /* Total Number of 512-1023 Bytes frames received */ uint64_t rx_512b_1023b_frames; /* Total Number of 1024-1518 Bytes frames received */ uint64_t rx_1024b_1518_frames; /* * Total Number of each good VLAN (exludes FCS errors) * frame received which is 1519 to 1522 bytes in length * inclusive (excluding framing bits but including FCS bytes). */ uint64_t rx_good_vlan_frames; /* Total Number of 1519-2047 Bytes frames received */ uint64_t rx_1519b_2047b_frames; /* Total Number of 2048-4095 Bytes frames received */ uint64_t rx_2048b_4095b_frames; /* Total Number of 4096-9216 Bytes frames received */ uint64_t rx_4096b_9216b_frames; /* Total Number of 9217-16383 Bytes frames received */ uint64_t rx_9217b_16383b_frames; /* Total number of frames received */ uint64_t rx_total_frames; /* Total number of unicast frames received */ uint64_t rx_ucast_frames; /* Total number of multicast frames received */ uint64_t rx_mcast_frames; /* Total number of broadcast frames received */ uint64_t rx_bcast_frames; /* Total number of received frames with FCS error */ uint64_t rx_fcs_err_frames; /* Total number of control frames received */ uint64_t rx_ctrl_frames; /* Total number of PAUSE frames received */ uint64_t rx_pause_frames; /* Total number of PFC frames received */ uint64_t rx_pfc_frames; /* * Total number of frames received with an unsupported * opcode */ uint64_t rx_unsupported_opcode_frames; /* * Total number of frames received with an unsupported * DA for pause and PFC */ uint64_t rx_unsupported_da_pausepfc_frames; /* Total number of frames received with an unsupported SA */ uint64_t rx_wrong_sa_frames; /* Total number of received packets with alignment error */ uint64_t rx_align_err_frames; /* Total number of received frames with out-of-range length */ uint64_t rx_oor_len_frames; /* Total number of received frames with error termination */ uint64_t rx_code_err_frames; /* * Total number of received frames with a false carrier is * detected during idle, as defined by RX_ER samples active * and RXD is 0xE. The event is reported along with the * statistics generated on the next received frame. Only * one false carrier condition can be detected and logged * between frames. * * Carrier event, valid for 10M/100M speed modes only. */ uint64_t rx_false_carrier_frames; /* Total number of over-sized frames received */ uint64_t rx_ovrsz_frames; /* Total number of jabber packets received */ uint64_t rx_jbr_frames; /* Total number of received frames with MTU error */ uint64_t rx_mtu_err_frames; /* Total number of received frames with CRC match */ uint64_t rx_match_crc_frames; /* Total number of frames received promiscuously */ uint64_t rx_promiscuous_frames; /* * Total number of received frames with one or two VLAN * tags */ uint64_t rx_tagged_frames; /* Total number of received frames with two VLAN tags */ uint64_t rx_double_tagged_frames; /* Total number of truncated frames received */ uint64_t rx_trunc_frames; /* Total number of good frames (without errors) received */ uint64_t rx_good_frames; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 0 */ uint64_t rx_pfc_xon2xoff_frames_pri0; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 1 */ uint64_t rx_pfc_xon2xoff_frames_pri1; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 2 */ uint64_t rx_pfc_xon2xoff_frames_pri2; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 3 */ uint64_t rx_pfc_xon2xoff_frames_pri3; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 4 */ uint64_t rx_pfc_xon2xoff_frames_pri4; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 5 */ uint64_t rx_pfc_xon2xoff_frames_pri5; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 6 */ uint64_t rx_pfc_xon2xoff_frames_pri6; /* * Total number of received PFC frames with transition from * XON to XOFF on Pri 7 */ uint64_t rx_pfc_xon2xoff_frames_pri7; /* * Total number of received PFC frames with PFC enabled * bit for Pri 0 */ uint64_t rx_pfc_ena_frames_pri0; /* * Total number of received PFC frames with PFC enabled * bit for Pri 1 */ uint64_t rx_pfc_ena_frames_pri1; /* * Total number of received PFC frames with PFC enabled * bit for Pri 2 */ uint64_t rx_pfc_ena_frames_pri2; /* * Total number of received PFC frames with PFC enabled * bit for Pri 3 */ uint64_t rx_pfc_ena_frames_pri3; /* * Total number of received PFC frames with PFC enabled * bit for Pri 4 */ uint64_t rx_pfc_ena_frames_pri4; /* * Total number of received PFC frames with PFC enabled * bit for Pri 5 */ uint64_t rx_pfc_ena_frames_pri5; /* * Total number of received PFC frames with PFC enabled * bit for Pri 6 */ uint64_t rx_pfc_ena_frames_pri6; /* * Total number of received PFC frames with PFC enabled * bit for Pri 7 */ uint64_t rx_pfc_ena_frames_pri7; /* Total Number of frames received with SCH CRC error */ uint64_t rx_sch_crc_err_frames; /* Total Number of under-sized frames received */ uint64_t rx_undrsz_frames; /* Total Number of fragmented frames received */ uint64_t rx_frag_frames; /* Total number of RX EEE LPI Events */ uint64_t rx_eee_lpi_events; /* EEE LPI Duration Counter on RX */ uint64_t rx_eee_lpi_duration; /* * Total number of physical type Link Level Flow Control * (LLFC) messages received */ uint64_t rx_llfc_physical_msgs; /* * Total number of logical type Link Level Flow Control * (LLFC) messages received */ uint64_t rx_llfc_logical_msgs; /* * Total number of logical type Link Level Flow Control * (LLFC) messages received with CRC error */ uint64_t rx_llfc_msgs_with_crc_err; /* Total number of HCFC messages received */ uint64_t rx_hcfc_msgs; /* Total number of HCFC messages received with CRC error */ uint64_t rx_hcfc_msgs_with_crc_err; /* Total number of received bytes */ uint64_t rx_bytes; /* Total number of bytes received in runt frames */ uint64_t rx_runt_bytes; /* Total number of runt frames received */ uint64_t rx_runt_frames; /* Total Rx Discards per Port reported by STATS block */ uint64_t rx_stat_discard; uint64_t rx_stat_err; } __attribute__((packed)); /* Port Rx Statistics extended Formats */ /* rx_port_stats_ext (size:320b/40B) */ struct rx_port_stats_ext { /* Number of times link state changed to down */ uint64_t link_down_events; /* Number of times the idle rings with pause bit are found */ uint64_t continuous_pause_events; /* Number of times the active rings pause bit resumed back */ uint64_t resume_pause_events; /* Number of times, the ROCE cos queue PFC is disabled to avoid pause flood/burst */ uint64_t continuous_roce_pause_events; /* Number of times, the ROCE cos queue PFC is enabled back */ uint64_t resume_roce_pause_events; } __attribute__((packed)); /* PCIe Statistics Formats */ /* pcie_ctx_hw_stats (size:768b/96B) */ struct pcie_ctx_hw_stats { /* Number of physical layer receiver errors */ uint64_t pcie_pl_signal_integrity; /* Number of DLLP CRC errors detected by Data Link Layer */ uint64_t pcie_dl_signal_integrity; /* * Number of TLP LCRC and sequence number errors detected * by Data Link Layer */ uint64_t pcie_tl_signal_integrity; /* Number of times LTSSM entered Recovery state */ uint64_t pcie_link_integrity; /* Number of TLP bytes that have been trasmitted */ uint64_t pcie_tx_traffic_rate; /* Number of TLP bytes that have been received */ uint64_t pcie_rx_traffic_rate; /* Number of DLLP bytes that have been trasmitted */ uint64_t pcie_tx_dllp_statistics; /* Number of DLLP bytes that have been received */ uint64_t pcie_rx_dllp_statistics; /* * Number of times spent in each phase of gen3 * equalization */ uint64_t pcie_equalization_time; /* Records the last 16 transitions of the LTSSM */ uint32_t pcie_ltssm_histogram[4]; /* * Record the last 8 reasons on why LTSSM transitioned * to Recovery */ uint64_t pcie_recovery_histogram; } __attribute__((packed)); /********************** * hwrm_exec_fwd_resp * **********************/ /* hwrm_exec_fwd_resp_input (size:1024b/128B) */ struct hwrm_exec_fwd_resp_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This is an encapsulated request. This request should * be executed by the HWRM and the response should be * provided in the response buffer inside the encapsulated * request. */ uint32_t encap_request[26]; /* * This value indicates the target id of the response to * the encapsulated request. * 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors * 0xFFFF - HWRM */ uint16_t encap_resp_target_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_exec_fwd_resp_output (size:128b/16B) */ struct hwrm_exec_fwd_resp_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************ * hwrm_reject_fwd_resp * ************************/ /* hwrm_reject_fwd_resp_input (size:1024b/128B) */ struct hwrm_reject_fwd_resp_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This is an encapsulated request. This request should * be rejected by the HWRM and the error response should be * provided in the response buffer inside the encapsulated * request. */ uint32_t encap_request[26]; /* * This value indicates the target id of the response to * the encapsulated request. * 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors * 0xFFFF - HWRM */ uint16_t encap_resp_target_id; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_reject_fwd_resp_output (size:128b/16B) */ struct hwrm_reject_fwd_resp_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************** * hwrm_fwd_resp * *****************/ /* hwrm_fwd_resp_input (size:1024b/128B) */ struct hwrm_fwd_resp_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This value indicates the target id of the encapsulated * response. * 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors * 0xFFFF - HWRM */ uint16_t encap_resp_target_id; /* * This value indicates the completion ring the encapsulated * response will be optionally completed on. If the value is * -1, then no CR completion shall be generated for the * encapsulated response. Any other value must be a * valid CR ring_id value. If a valid encap_resp_cmpl_ring * is provided, then a CR completion shall be generated for * the encapsulated response. */ uint16_t encap_resp_cmpl_ring; /* This field indicates the length of encapsulated response. */ uint16_t encap_resp_len; uint8_t unused_0; uint8_t unused_1; /* * This is the host address where the encapsulated response * will be written. * This area must be 16B aligned and must be cleared to zero * before the original request is made. */ uint64_t encap_resp_addr; /* This is an encapsulated response. */ uint32_t encap_resp[24]; } __attribute__((packed)); /* hwrm_fwd_resp_output (size:128b/16B) */ struct hwrm_fwd_resp_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************************** * hwrm_fwd_async_event_cmpl * *****************************/ /* hwrm_fwd_async_event_cmpl_input (size:320b/40B) */ struct hwrm_fwd_async_event_cmpl_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This value indicates the target id of the encapsulated * asynchronous event. * 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors * 0xFFFF - Broadcast to all children VFs (only applicable when * a PF is the requester) */ uint16_t encap_async_event_target_id; uint8_t unused_0[6]; /* This is an encapsulated asynchronous event completion. */ uint32_t encap_async_event_cmpl[4]; } __attribute__((packed)); /* hwrm_fwd_async_event_cmpl_output (size:128b/16B) */ struct hwrm_fwd_async_event_cmpl_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_nvm_raw_write_blk * **************************/ /* hwrm_nvm_raw_write_blk_input (size:256b/32B) */ struct hwrm_nvm_raw_write_blk_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * 64-bit Host Source Address. * This is the loation of the source data to be written. */ uint64_t host_src_addr; /* * 32-bit Destination Address. * This is the NVRAM byte-offset where the source data will be written to. */ uint32_t dest_addr; /* Length of data to be written, in bytes. */ uint32_t len; } __attribute__((packed)); /* hwrm_nvm_raw_write_blk_output (size:128b/16B) */ struct hwrm_nvm_raw_write_blk_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /***************** * hwrm_nvm_read * *****************/ /* hwrm_nvm_read_input (size:320b/40B) */ struct hwrm_nvm_read_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * 64-bit Host Destination Address. * This is the host address where the data will be written to. */ uint64_t host_dest_addr; /* The 0-based index of the directory entry. */ uint16_t dir_idx; uint8_t unused_0[2]; /* The NVRAM byte-offset to read from. */ uint32_t offset; /* The length of the data to be read, in bytes. */ uint32_t len; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_nvm_read_output (size:128b/16B) */ struct hwrm_nvm_read_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /********************* * hwrm_nvm_raw_dump * *********************/ /* hwrm_nvm_raw_dump_input (size:256b/32B) */ struct hwrm_nvm_raw_dump_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * 64-bit Host Destination Address. * This is the host address where the data will be written to. */ uint64_t host_dest_addr; /* 32-bit NVRAM byte-offset to read from. */ uint32_t offset; /* Total length of NVRAM contents to be read, in bytes. */ uint32_t len; } __attribute__((packed)); /* hwrm_nvm_raw_dump_output (size:128b/16B) */ struct hwrm_nvm_raw_dump_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /**************************** * hwrm_nvm_get_dir_entries * ****************************/ /* hwrm_nvm_get_dir_entries_input (size:192b/24B) */ struct hwrm_nvm_get_dir_entries_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * 64-bit Host Destination Address. * This is the host address where the directory will be written. */ uint64_t host_dest_addr; } __attribute__((packed)); /* hwrm_nvm_get_dir_entries_output (size:128b/16B) */ struct hwrm_nvm_get_dir_entries_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_nvm_get_dir_info * *************************/ /* hwrm_nvm_get_dir_info_input (size:128b/16B) */ struct hwrm_nvm_get_dir_info_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_nvm_get_dir_info_output (size:192b/24B) */ struct hwrm_nvm_get_dir_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Number of directory entries in the directory. */ uint32_t entries; /* Size of each directory entry, in bytes. */ uint32_t entry_length; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /****************** * hwrm_nvm_write * ******************/ /* hwrm_nvm_write_input (size:384b/48B) */ struct hwrm_nvm_write_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * 64-bit Host Source Address. * This is where the source data is. */ uint64_t host_src_addr; /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */ uint16_t dir_type; /* * Directory ordinal. * The 0-based instance of the combined Directory Entry Type and Extension. */ uint16_t dir_ordinal; /* The Directory Entry Extension flags (see BNX_DIR_EXT_* in the file bnxnvm_defs.h). */ uint16_t dir_ext; /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */ uint16_t dir_attr; /* * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry. * The data length stored in the directory entry will be updated to reflect this value once the write is complete. */ uint32_t dir_data_length; /* Option. */ uint16_t option; uint16_t flags; /* * When this bit is '1', the original active image * will not be removed. TBD: what purpose is this? */ #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG \ UINT32_C(0x1) /* * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length). * If this value is less than the specified data length, it will be ignored. * The response will contain the actual allocated item length, which may be greater than the requested item length. * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accomodate * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data). */ uint32_t dir_item_length; uint32_t unused_0; } __attribute__((packed)); /* hwrm_nvm_write_output (size:128b/16B) */ struct hwrm_nvm_write_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length. * The actual item length used when creating a new directory entry will be a multiple of an NVM block size. */ uint32_t dir_item_length; /* The directory index of the created or modified item. */ uint16_t dir_idx; uint8_t unused_0; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_write_cmd_err (size:64b/8B) */ struct hwrm_nvm_write_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_NVM_WRITE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* Unable to complete operation due to fragmentation */ #define HWRM_NVM_WRITE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1) /* nvm is completely full. */ #define HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2) #define HWRM_NVM_WRITE_CMD_ERR_CODE_LAST \ HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE uint8_t unused_0[7]; } __attribute__((packed)); /******************* * hwrm_nvm_modify * *******************/ /* hwrm_nvm_modify_input (size:320b/40B) */ struct hwrm_nvm_modify_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * 64-bit Host Source Address. * This is where the modified data is. */ uint64_t host_src_addr; /* 16-bit directory entry index. */ uint16_t dir_idx; uint8_t unused_0[2]; /* 32-bit NVRAM byte-offset to modify content from. */ uint32_t offset; /* * Length of data to be modified, in bytes. The length shall * be non-zero. */ uint32_t len; uint8_t unused_1[4]; } __attribute__((packed)); /* hwrm_nvm_modify_output (size:128b/16B) */ struct hwrm_nvm_modify_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_nvm_find_dir_entry * ***************************/ /* hwrm_nvm_find_dir_entry_input (size:256b/32B) */ struct hwrm_nvm_find_dir_entry_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the dir_idx_valid field to be * configured. */ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_ENABLES_DIR_IDX_VALID \ UINT32_C(0x1) /* Directory Entry Index */ uint16_t dir_idx; /* Directory Entry (Image) Type */ uint16_t dir_type; /* * Directory ordinal. * The instance of this Directory Type */ uint16_t dir_ordinal; /* The Directory Entry Extension flags. */ uint16_t dir_ext; /* This value indicates the search option using dir_ordinal. */ uint8_t opt_ordinal; /* This value indicates the search option using dir_ordinal. */ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_MASK UINT32_C(0x3) #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_SFT 0 /* Equal to specified ordinal value. */ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_EQ UINT32_C(0x0) /* Greater than or equal to specified ordinal value */ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GE UINT32_C(0x1) /* Greater than specified ordinal value */ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT UINT32_C(0x2) #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_LAST \ HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT uint8_t unused_0[3]; } __attribute__((packed)); /* hwrm_nvm_find_dir_entry_output (size:256b/32B) */ struct hwrm_nvm_find_dir_entry_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Allocated NVRAM for this directory entry, in bytes. */ uint32_t dir_item_length; /* Size of the stored data for this directory entry, in bytes. */ uint32_t dir_data_length; /* * Firmware version. * Only valid if the directory entry is for embedded firmware stored in APE_BIN Format. */ uint32_t fw_ver; /* Directory ordinal. */ uint16_t dir_ordinal; /* Directory Entry Index */ uint16_t dir_idx; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /**************************** * hwrm_nvm_erase_dir_entry * ****************************/ /* hwrm_nvm_erase_dir_entry_input (size:192b/24B) */ struct hwrm_nvm_erase_dir_entry_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Directory Entry Index */ uint16_t dir_idx; uint8_t unused_0[6]; } __attribute__((packed)); /* hwrm_nvm_erase_dir_entry_output (size:128b/16B) */ struct hwrm_nvm_erase_dir_entry_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************* * hwrm_nvm_get_dev_info * *************************/ /* hwrm_nvm_get_dev_info_input (size:128b/16B) */ struct hwrm_nvm_get_dev_info_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_nvm_get_dev_info_output (size:256b/32B) */ struct hwrm_nvm_get_dev_info_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* Manufacturer ID. */ uint16_t manufacturer_id; /* Device ID. */ uint16_t device_id; /* Sector size of the NVRAM device. */ uint32_t sector_size; /* Total size, in bytes of the NVRAM device. */ uint32_t nvram_size; uint32_t reserved_size; /* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */ uint32_t available_size; uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_nvm_mod_dir_entry * **************************/ /* hwrm_nvm_mod_dir_entry_input (size:256b/32B) */ struct hwrm_nvm_mod_dir_entry_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; uint32_t enables; /* * This bit must be '1' for the checksum field to be * configured. */ #define HWRM_NVM_MOD_DIR_ENTRY_INPUT_ENABLES_CHECKSUM UINT32_C(0x1) /* Directory Entry Index */ uint16_t dir_idx; /* * Directory ordinal. * The (0-based) instance of this Directory Type. */ uint16_t dir_ordinal; /* The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension flag definitions). */ uint16_t dir_ext; /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag definitions). */ uint16_t dir_attr; /* * If valid, then this field updates the checksum * value of the content in the directory entry. */ uint32_t checksum; } __attribute__((packed)); /* hwrm_nvm_mod_dir_entry_output (size:128b/16B) */ struct hwrm_nvm_mod_dir_entry_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /************************** * hwrm_nvm_verify_update * **************************/ /* hwrm_nvm_verify_update_input (size:192b/24B) */ struct hwrm_nvm_verify_update_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* Directory Entry Type, to be verified. */ uint16_t dir_type; /* * Directory ordinal. * The instance of the Directory Type to be verified. */ uint16_t dir_ordinal; /* * The Directory Entry Extension flags. * The "UPDATE" extension flag must be set in this value. * A corresponding directory entry with the same type and ordinal values but *without* * the "UPDATE" extension flag must also exist. The other flags of the extension must * be identical between the active and update entries. */ uint16_t dir_ext; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_nvm_verify_update_output (size:128b/16B) */ struct hwrm_nvm_verify_update_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /*************************** * hwrm_nvm_install_update * ***************************/ /* hwrm_nvm_install_update_input (size:192b/24B) */ struct hwrm_nvm_install_update_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * Installation type. If the value 3 through 0xffff is used, * only packaged items with that type value will be installed and * conditional installation directives for those packaged items * will be over-ridden (i.e. 'create' or 'replace' will be treated * as 'install'). */ uint32_t install_type; /* * Perform a normal package installation. Conditional installation * directives (e.g. 'create' and 'replace') of packaged items * will be followed. */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_NORMAL UINT32_C(0x0) /* * Install all packaged items regardless of installation directive * (i.e. treat all packaged items as though they have an installation * directive of 'install'). */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL \ UINT32_C(0xffffffff) #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_LAST \ HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL uint16_t flags; /* If set to 1, then securely erase all unused locations in persistent storage. */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \ UINT32_C(0x1) /* * If set to 1, then unspecifed images, images not in the package file, will be safely deleted. * When combined with erase_unused_space then unspecified images will be securely erased. */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \ UINT32_C(0x2) /* * If set to 1, FW will defragment the NVM if defragmentation is required for the update. * Allow additional time for this command to complete if this bit is set to 1. */ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \ UINT32_C(0x4) uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_nvm_install_update_output (size:192b/24B) */ struct hwrm_nvm_install_update_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* * Bit-mask of successfully installed items. * Bit-0 corresponding to the first packaged item, Bit-1 for the second item, etc. * A value of 0 indicates that no items were successfully installed. */ uint64_t installed_items; /* result is 8 b */ uint8_t result; /* There was no problem with the package installation. */ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS UINT32_C(0x0) #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_LAST \ HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS /* problem_item is 8 b */ uint8_t problem_item; /* There was no problem with any packaged items. */ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_NONE \ UINT32_C(0x0) /* There was a problem with the NVM package itself. */ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE \ UINT32_C(0xff) #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_LAST \ HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE /* reset_required is 8 b */ uint8_t reset_required; /* * No reset is required for installed/updated firmware or * microcode to take effect. */ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_NONE \ UINT32_C(0x0) /* * A PCIe reset (e.g. system reboot) is * required for newly installed/updated firmware or * microcode to take effect. */ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_PCI \ UINT32_C(0x1) /* * A controller power reset (e.g. system power-cycle) is * required for newly installed/updated firmware or * microcode to take effect. Some newly installed/updated * firmware or microcode may still take effect upon the * next PCIe reset. */ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER \ UINT32_C(0x2) #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_LAST \ HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER uint8_t unused_0[4]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_install_update_cmd_err (size:64b/8B) */ struct hwrm_nvm_install_update_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* Unable to complete operation due to fragmentation */ #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1) /* nvm is completely full. */ #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2) #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_LAST \ HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE uint8_t unused_0[7]; } __attribute__((packed)); /****************** * hwrm_nvm_flush * ******************/ /* hwrm_nvm_flush_input (size:128b/16B) */ struct hwrm_nvm_flush_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; } __attribute__((packed)); /* hwrm_nvm_flush_output (size:128b/16B) */ struct hwrm_nvm_flush_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_flush_cmd_err (size:64b/8B) */ struct hwrm_nvm_flush_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_NVM_FLUSH_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* flush could not be performed */ #define HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL UINT32_C(0x1) #define HWRM_NVM_FLUSH_CMD_ERR_CODE_LAST \ HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL uint8_t unused_0[7]; } __attribute__((packed)); /************************* * hwrm_nvm_get_variable * *************************/ /* hwrm_nvm_get_variable_input (size:320b/40B) */ struct hwrm_nvm_get_variable_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This is the host address where * nvm variable will be stored */ uint64_t dest_data_addr; /* size of data in bits */ uint16_t data_len; /* nvm cfg option number */ uint16_t option_num; /* reserved. */ #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) /* reserved. */ #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \ UINT32_C(0xffff) #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_LAST \ HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF /* * Number of dimensions for this nvm configuration variable. * This value indicates how many of the indexN values to use. * A value of 0 means that none of the indexN values are valid. * A value of 1 requires at index0 is valued, a value of 2 * requires that index0 and index1 are valid, and so forth */ uint16_t dimensions; /* index for the 1st dimensions */ uint16_t index_0; /* index for the 2nd dimensions */ uint16_t index_1; /* index for the 3rd dimensions */ uint16_t index_2; /* index for the 4th dimensions */ uint16_t index_3; uint8_t flags; /* * When this bit is set to 1, the factory default value will be returned, * 0 returns the operational value. */ #define HWRM_NVM_GET_VARIABLE_INPUT_FLAGS_FACTORY_DFLT \ UINT32_C(0x1) uint8_t unused_0; } __attribute__((packed)); /* hwrm_nvm_get_variable_output (size:128b/16B) */ struct hwrm_nvm_get_variable_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; /* size of data of the actual variable retrieved in bits */ uint16_t data_len; /* * option_num is the option number for the data retrieved. It is possible in the * future that the option number returned would be different than requested. This * condition could occur if an option is deprecated and a new option id is defined * with similar characteristics, but has a slightly different definition. This * also makes it convenient for the caller to identify the variable result with * the option id from the response. */ uint16_t option_num; /* reserved. */ #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) /* reserved. */ #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF \ UINT32_C(0xffff) #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_LAST \ HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF uint8_t unused_0[3]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_get_variable_cmd_err (size:64b/8B) */ struct hwrm_nvm_get_variable_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* variable does not exist */ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1) /* configuration is corrupted and the variable cannot be saved */ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2) /* length specified is too small */ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT UINT32_C(0x3) #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LAST \ HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT uint8_t unused_0[7]; } __attribute__((packed)); /************************* * hwrm_nvm_set_variable * *************************/ /* hwrm_nvm_set_variable_input (size:320b/40B) */ struct hwrm_nvm_set_variable_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This is the host address where * nvm variable will be copied from */ uint64_t src_data_addr; /* size of data in bits */ uint16_t data_len; /* nvm cfg option number */ uint16_t option_num; /* reserved. */ #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0) /* reserved. */ #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \ UINT32_C(0xffff) #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_LAST \ HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF /* * Number of dimensions for this nvm configuration variable. * This value indicates how many of the indexN values to use. * A value of 0 means that none of the indexN values are valid. * A value of 1 requires at index0 is valued, a value of 2 * requires that index0 and index1 are valid, and so forth */ uint16_t dimensions; /* index for the 1st dimensions */ uint16_t index_0; /* index for the 2nd dimensions */ uint16_t index_1; /* index for the 3rd dimensions */ uint16_t index_2; /* index for the 4th dimensions */ uint16_t index_3; uint8_t flags; /* When this bit is 1, flush internal cache after this write operation (see hwrm_nvm_flush command.) */ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FORCE_FLUSH \ UINT32_C(0x1) /* encryption method */ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_MASK \ UINT32_C(0xe) #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_SFT 1 /* No encryption. */ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_NONE \ (UINT32_C(0x0) << 1) /* one-way encryption. */ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1 \ (UINT32_C(0x1) << 1) /* symmetric AES256 encryption. */ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_AES256 \ (UINT32_C(0x2) << 1) /* SHA1 digest appended to plaintext contents, for authentication */ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH \ (UINT32_C(0x3) << 1) #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_LAST \ HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH uint8_t unused_0; } __attribute__((packed)); /* hwrm_nvm_set_variable_output (size:128b/16B) */ struct hwrm_nvm_set_variable_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t unused_0[7]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_set_variable_cmd_err (size:64b/8B) */ struct hwrm_nvm_set_variable_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* variable does not exist */ #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1) /* configuration is corrupted and the variable cannot be saved */ #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2) #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_LAST \ HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR uint8_t unused_0[7]; } __attribute__((packed)); /**************************** * hwrm_nvm_validate_option * ****************************/ /* hwrm_nvm_validate_option_input (size:320b/40B) */ struct hwrm_nvm_validate_option_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* * This is the host address where * nvm variable will be copied from */ uint64_t src_data_addr; /* size of data in bits */ uint16_t data_len; /* nvm cfg option number */ uint16_t option_num; /* reserved. */ #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_0 \ UINT32_C(0x0) /* reserved. */ #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF \ UINT32_C(0xffff) #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_LAST \ HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF /* * Number of dimensions for this nvm configuration variable. * This value indicates how many of the indexN values to use. * A value of 0 means that none of the indexN values are valid. * A value of 1 requires at index0 is valued, a value of 2 * requires that index0 and index1 are valid, and so forth */ uint16_t dimensions; /* index for the 1st dimensions */ uint16_t index_0; /* index for the 2nd dimensions */ uint16_t index_1; /* index for the 3rd dimensions */ uint16_t index_2; /* index for the 4th dimensions */ uint16_t index_3; uint8_t unused_0[2]; } __attribute__((packed)); /* hwrm_nvm_validate_option_output (size:128b/16B) */ struct hwrm_nvm_validate_option_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t result; /* indicates that the value provided for the option is not matching with the saved data. */ #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_NOT_MATCH UINT32_C(0x0) /* indicates that the value provided for the option is matching the saved data. */ #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH UINT32_C(0x1) #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_LAST \ HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH uint8_t unused_0[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_validate_option_cmd_err (size:64b/8B) */ struct hwrm_nvm_validate_option_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_LAST \ HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN uint8_t unused_0[7]; } __attribute__((packed)); /***************************** * hwrm_nvm_factory_defaults * *****************************/ /* hwrm_nvm_factory_defaults_input (size:192b/24B) */ struct hwrm_nvm_factory_defaults_input { /* The HWRM command request type. */ uint16_t req_type; /* * The completion ring to send the completion event on. This should * be the NQ ID returned from the `nq_alloc` HWRM command. */ uint16_t cmpl_ring; /* * The sequence ID is used by the driver for tracking multiple * commands. This ID is treated as opaque data by the firmware and * the value is returned in the `hwrm_resp_hdr` upon completion. */ uint16_t seq_id; /* * The target ID of the command: * * 0x0-0xFFF8 - The function ID * * 0xFFF8-0xFFFE - Reserved for internal processors * * 0xFFFF - HWRM */ uint16_t target_id; /* * A physical address pointer pointing to a host buffer that the * command's response data will be written. This can be either a host * physical address (HPA) or a guest physical address (GPA) and must * point to a physically contiguous block of memory. */ uint64_t resp_addr; /* mode is 8 b */ uint8_t mode; /* If set to 1, it will trigger restoration of factory default settings */ #define HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_RESTORE UINT32_C(0x0) /* If set to 1, it will trigger creation of factory default settings */ #define HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_CREATE UINT32_C(0x1) #define HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_LAST \ HWRM_NVM_FACTORY_DEFAULTS_INPUT_MODE_CREATE uint8_t unused_0[7]; } __attribute__((packed)); /* hwrm_nvm_factory_defaults_output (size:128b/16B) */ struct hwrm_nvm_factory_defaults_output { /* The specific error status for the command. */ uint16_t error_code; /* The HWRM command request type. */ uint16_t req_type; /* The sequence ID from the original command. */ uint16_t seq_id; /* The length of the response data in number of bytes. */ uint16_t resp_len; uint8_t result; /* factory defaults created successfully. */ #define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_CREATE_OK \ UINT32_C(0x0) /* factory defaults restored successfully. */ #define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_RESTORE_OK \ UINT32_C(0x1) /* factory defaults already created. */ #define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_CREATE_ALREADY \ UINT32_C(0x2) #define HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_LAST \ HWRM_NVM_FACTORY_DEFAULTS_OUTPUT_RESULT_CREATE_ALREADY uint8_t unused_0[6]; /* * This field is used in Output records to indicate that the output * is completely written to RAM. This field should be read as '1' * to indicate that the output has been completely written. * When writing a command completion or response to an internal processor, * the order of writes has to be such that this field is written last. */ uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_factory_defaults_cmd_err (size:64b/8B) */ struct hwrm_nvm_factory_defaults_cmd_err { /* * command specific error codes that goes to * the cmd_err field in Common HWRM Error Response. */ uint8_t code; /* Unknown error */ #define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_UNKNOWN \ UINT32_C(0x0) /* valid configuration not present to create defaults */ #define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_NO_VALID_CFG \ UINT32_C(0x1) /* No saved configuration present to restore, restore failed */ #define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_NO_SAVED_CFG \ UINT32_C(0x2) #define HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_LAST \ HWRM_NVM_FACTORY_DEFAULTS_CMD_ERR_CODE_NO_SAVED_CFG uint8_t unused_0[7]; } __attribute__((packed)); #endif /* _HSI_STRUCT_DEF_DPDK_H_ */