/*- * BSD LICENSE * * Copyright(c) 2001-2017 Broadcom Limited. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Broadcom Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _HSI_STRUCT_DEF_DPDK_ #define _HSI_STRUCT_DEF_DPDK_ /* HSI and HWRM Specification 1.8.2 */ #define HWRM_VERSION_MAJOR 1 #define HWRM_VERSION_MINOR 8 #define HWRM_VERSION_UPDATE 2 #define HWRM_VERSION_RSVD 0 /* non-zero means beta version */ #define HWRM_VERSION_STR "1.8.2.0" /* * Following is the signature for HWRM message field that indicates not * applicable (All F's). Need to cast it the size of the field if needed. */ #define HWRM_NA_SIGNATURE ((uint32_t)(-1)) #define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */ #define HWRM_MAX_RESP_LEN (280) /* hwrm_selftest_qlist */ #define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */ #define HW_HASH_KEY_SIZE 40 #define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */ #define HWRM_ROCE_SP_HSI_VERSION_MAJOR 1 #define HWRM_ROCE_SP_HSI_VERSION_MINOR 8 #define HWRM_ROCE_SP_HSI_VERSION_UPDATE 2 /* * Request types */ #define HWRM_VER_GET (UINT32_C(0x0)) #define HWRM_FUNC_BUF_UNRGTR (UINT32_C(0xe)) #define HWRM_FUNC_VF_CFG (UINT32_C(0xf)) /* Reserved for future use */ #define RESERVED1 (UINT32_C(0x10)) #define HWRM_FUNC_RESET (UINT32_C(0x11)) #define HWRM_FUNC_GETFID (UINT32_C(0x12)) #define HWRM_FUNC_VF_ALLOC (UINT32_C(0x13)) #define HWRM_FUNC_VF_FREE (UINT32_C(0x14)) #define HWRM_FUNC_QCAPS (UINT32_C(0x15)) #define HWRM_FUNC_QCFG (UINT32_C(0x16)) #define HWRM_FUNC_CFG (UINT32_C(0x17)) #define HWRM_FUNC_QSTATS (UINT32_C(0x18)) #define HWRM_FUNC_CLR_STATS (UINT32_C(0x19)) #define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a)) #define HWRM_FUNC_VF_RESC_FREE (UINT32_C(0x1b)) #define HWRM_FUNC_VF_VNIC_IDS_QUERY (UINT32_C(0x1c)) #define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d)) #define HWRM_FUNC_DRV_QVER (UINT32_C(0x1e)) #define HWRM_FUNC_BUF_RGTR (UINT32_C(0x1f)) #define HWRM_PORT_PHY_CFG (UINT32_C(0x20)) #define HWRM_PORT_MAC_CFG (UINT32_C(0x21)) #define HWRM_PORT_QSTATS (UINT32_C(0x23)) #define HWRM_PORT_LPBK_QSTATS (UINT32_C(0x24)) #define HWRM_PORT_CLR_STATS (UINT32_C(0x25)) #define HWRM_PORT_PHY_QCFG (UINT32_C(0x27)) #define HWRM_PORT_MAC_QCFG (UINT32_C(0x28)) #define HWRM_PORT_PHY_QCAPS (UINT32_C(0x2a)) #define HWRM_PORT_LED_CFG (UINT32_C(0x2d)) #define HWRM_PORT_LED_QCFG (UINT32_C(0x2e)) #define HWRM_PORT_LED_QCAPS (UINT32_C(0x2f)) #define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30)) #define HWRM_QUEUE_QCFG (UINT32_C(0x31)) #define HWRM_QUEUE_CFG (UINT32_C(0x32)) #define HWRM_FUNC_VLAN_CFG (UINT32_C(0x33)) #define HWRM_FUNC_VLAN_QCFG (UINT32_C(0x34)) #define HWRM_QUEUE_PFCENABLE_QCFG (UINT32_C(0x35)) #define HWRM_QUEUE_PFCENABLE_CFG (UINT32_C(0x36)) #define HWRM_QUEUE_PRI2COS_QCFG (UINT32_C(0x37)) #define HWRM_QUEUE_PRI2COS_CFG (UINT32_C(0x38)) #define HWRM_QUEUE_COS2BW_QCFG (UINT32_C(0x39)) #define HWRM_QUEUE_COS2BW_CFG (UINT32_C(0x3a)) #define HWRM_VNIC_ALLOC (UINT32_C(0x40)) #define HWRM_VNIC_ALLOC (UINT32_C(0x40)) #define HWRM_VNIC_FREE (UINT32_C(0x41)) #define HWRM_VNIC_CFG (UINT32_C(0x42)) #define HWRM_VNIC_QCFG (UINT32_C(0x43)) #define HWRM_VNIC_TPA_CFG (UINT32_C(0x44)) #define HWRM_VNIC_RSS_CFG (UINT32_C(0x46)) #define HWRM_VNIC_RSS_QCFG (UINT32_C(0x47)) #define HWRM_VNIC_PLCMODES_CFG (UINT32_C(0x48)) #define HWRM_VNIC_PLCMODES_QCFG (UINT32_C(0x49)) #define HWRM_VNIC_QCAPS (UINT32_C(0x4a)) #define HWRM_RING_ALLOC (UINT32_C(0x50)) #define HWRM_RING_FREE (UINT32_C(0x51)) #define HWRM_RING_CMPL_RING_QAGGINT_PARAMS (UINT32_C(0x52)) #define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS (UINT32_C(0x53)) #define HWRM_RING_RESET (UINT32_C(0x5e)) #define HWRM_RING_GRP_ALLOC (UINT32_C(0x60)) #define HWRM_RING_GRP_FREE (UINT32_C(0x61)) #define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC (UINT32_C(0x70)) #define HWRM_VNIC_RSS_COS_LB_CTX_FREE (UINT32_C(0x71)) #define HWRM_CFA_L2_FILTER_ALLOC (UINT32_C(0x90)) #define HWRM_CFA_L2_FILTER_FREE (UINT32_C(0x91)) #define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92)) #define HWRM_CFA_L2_SET_RX_MASK (UINT32_C(0x93)) /* Reserved for future use */ #define HWRM_CFA_VLAN_ANTISPOOF_CFG (UINT32_C(0x94)) #define HWRM_CFA_TUNNEL_FILTER_ALLOC (UINT32_C(0x95)) #define HWRM_CFA_TUNNEL_FILTER_FREE (UINT32_C(0x96)) #define HWRM_CFA_NTUPLE_FILTER_ALLOC (UINT32_C(0x99)) #define HWRM_CFA_NTUPLE_FILTER_FREE (UINT32_C(0x9a)) #define HWRM_CFA_NTUPLE_FILTER_CFG (UINT32_C(0x9b)) #define HWRM_CFA_EM_FLOW_ALLOC (UINT32_C(0x9c)) #define HWRM_CFA_EM_FLOW_FREE (UINT32_C(0x9d)) #define HWRM_CFA_EM_FLOW_CFG (UINT32_C(0x9e)) #define HWRM_TUNNEL_DST_PORT_QUERY (UINT32_C(0xa0)) #define HWRM_TUNNEL_DST_PORT_ALLOC (UINT32_C(0xa1)) #define HWRM_TUNNEL_DST_PORT_FREE (UINT32_C(0xa2)) #define HWRM_STAT_CTX_ALLOC (UINT32_C(0xb0)) #define HWRM_STAT_CTX_FREE (UINT32_C(0xb1)) #define HWRM_STAT_CTX_QUERY (UINT32_C(0xb2)) #define HWRM_STAT_CTX_CLR_STATS (UINT32_C(0xb3)) #define HWRM_FW_RESET (UINT32_C(0xc0)) #define HWRM_FW_QSTATUS (UINT32_C(0xc1)) #define HWRM_EXEC_FWD_RESP (UINT32_C(0xd0)) #define HWRM_REJECT_FWD_RESP (UINT32_C(0xd1)) #define HWRM_FWD_RESP (UINT32_C(0xd2)) #define HWRM_FWD_ASYNC_EVENT_CMPL (UINT32_C(0xd3)) #define HWRM_TEMP_MONITOR_QUERY (UINT32_C(0xe0)) #define HWRM_WOL_FILTER_ALLOC (UINT32_C(0xf0)) #define HWRM_WOL_FILTER_FREE (UINT32_C(0xf1)) #define HWRM_WOL_FILTER_QCFG (UINT32_C(0xf2)) #define HWRM_WOL_REASON_QCFG (UINT32_C(0xf3)) #define HWRM_DBG_DUMP (UINT32_C(0xff14)) #define HWRM_NVM_VALIDATE_OPTION (UINT32_C(0xffef)) #define HWRM_NVM_FLUSH (UINT32_C(0xfff0)) #define HWRM_NVM_GET_VARIABLE (UINT32_C(0xfff1)) #define HWRM_NVM_SET_VARIABLE (UINT32_C(0xfff2)) #define HWRM_NVM_INSTALL_UPDATE (UINT32_C(0xfff3)) #define HWRM_NVM_MODIFY (UINT32_C(0xfff4)) #define HWRM_NVM_VERIFY_UPDATE (UINT32_C(0xfff5)) #define HWRM_NVM_GET_DEV_INFO (UINT32_C(0xfff6)) #define HWRM_NVM_ERASE_DIR_ENTRY (UINT32_C(0xfff7)) #define HWRM_NVM_MOD_DIR_ENTRY (UINT32_C(0xfff8)) #define HWRM_NVM_FIND_DIR_ENTRY (UINT32_C(0xfff9)) #define HWRM_NVM_GET_DIR_ENTRIES (UINT32_C(0xfffa)) #define HWRM_NVM_GET_DIR_INFO (UINT32_C(0xfffb)) #define HWRM_NVM_RAW_DUMP (UINT32_C(0xfffc)) #define HWRM_NVM_READ (UINT32_C(0xfffd)) #define HWRM_NVM_WRITE (UINT32_C(0xfffe)) #define HWRM_NVM_RAW_WRITE_BLK (UINT32_C(0xffff)) /* * Note: The Host Software Interface (HSI) and Hardware Resource Manager (HWRM) * specification describes the data structures used in Ethernet packet or RDMA * message data transfers as well as an abstract interface for managing Ethernet * NIC hardware resources. */ /* Ethernet Data path Host Structures */ /* * Description: The following three sections document the host structures used * between device and software drivers for communicating Ethernet packets. */ /* BD Ring Structures */ /* * Description: This structure is used to inform the NIC of a location for and * an aggregation buffer that will be used for packet data that is received. An * aggregation buffer creates a different kind of completion operation for a * packet where a variable number of BDs may be used to place the packet in the * host. RX Rings that have aggregation buffers are known as aggregation rings * and must contain only aggregation buffers. */ /* Short TX BD (16 bytes) */ struct tx_bd_short { uint16_t flags_type; /* * All bits in this field must be valid on the first BD of a * packet. Only the packet_end bit must be valid for the * remaining BDs of a packet. */ /* This value identifies the type of buffer descriptor. */ #define TX_BD_SHORT_TYPE_MASK UINT32_C(0x3f) #define TX_BD_SHORT_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is * used for normal L2 packet transmission. */ #define TX_BD_SHORT_TYPE_TX_BD_SHORT UINT32_C(0x0) /* * If set to 1, the packet ends with the data in the buffer * pointed to by this descriptor. This flag must be valid on * every BD. */ #define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40) /* * If set to 1, the device will not generate a completion for * this transmit packet unless there is an error in it's * processing. If this bit is set to 0, then the packet will be * completed normally. This bit must be valid only on the first * BD of a packet. */ #define TX_BD_SHORT_FLAGS_NO_CMPL UINT32_C(0x80) /* * This value indicates how many 16B BD locations are consumed * in the ring by this packet. A value of 1 indicates that this * BD is the only BD (and that the it is a short BD). A value of * 3 indicates either 3 short BDs or 1 long BD and one short BD * in the packet. A value of 0 indicates that there are 32 BD * locations in the packet (the maximum). This field is valid * only on the first BD of a packet. */ #define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) #define TX_BD_SHORT_FLAGS_BD_CNT_SFT 8 /* * This value is a hint for the length of the entire packet. It * is used by the chip to optimize internal processing. The * packet will be dropped if the hint is too short. This field * is valid only on the first BD of a packet. */ #define TX_BD_SHORT_FLAGS_LHINT_MASK UINT32_C(0x6000) #define TX_BD_SHORT_FLAGS_LHINT_SFT 13 /* indicates packet length < 512B */ #define TX_BD_SHORT_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) /* indicates 512 <= packet length < 1KB */ #define TX_BD_SHORT_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) /* indicates 1KB <= packet length < 2KB */ #define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) /* indicates packet length >= 2KB */ #define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) #define TX_BD_SHORT_FLAGS_LHINT_LAST \ TX_BD_SHORT_FLAGS_LHINT_GTE2K /* * If set to 1, the device immediately updates the Send Consumer * Index after the buffer associated with this descriptor has * been transferred via DMA to NIC memory from host memory. An * interrupt may or may not be generated according to the state * of the interrupt avoidance mechanisms. If this bit is set to * 0, then the Consumer Index is only updated as soon as one of * the host interrupt coalescing conditions has been met. This * bit must be valid on the first BD of a packet. */ #define TX_BD_SHORT_FLAGS_COAL_NOW UINT32_C(0x8000) /* * All bits in this field must be valid on the first BD of a * packet. Only the packet_end bit must be valid for the * remaining BDs of a packet. */ #define TX_BD_SHORT_FLAGS_MASK UINT32_C(0xffc0) #define TX_BD_SHORT_FLAGS_SFT 6 uint16_t len; /* * This is the length of the host physical buffer this BD * describes in bytes. This field must be valid on all BDs of a * packet. */ uint32_t opaque; /* * The opaque data field is pass through to the completion and * can be used for any data that the driver wants to associate * with the transmit BD. This field must be valid on the first * BD of a packet. */ uint64_t addr; /* * This is the host physical address for the portion of the * packet described by this TX BD. This value must be valid on * all BDs of a packet. */ } __attribute__((packed)); /* Long TX BD (32 bytes split to 2 16-byte struct) */ struct tx_bd_long { uint16_t flags_type; /* * All bits in this field must be valid on the first BD of a * packet. Only the packet_end bit must be valid for the * remaining BDs of a packet. */ /* This value identifies the type of buffer descriptor. */ #define TX_BD_LONG_TYPE_MASK UINT32_C(0x3f) #define TX_BD_LONG_TYPE_SFT 0 /* * Indicates that this BD is 32B long and is * used for normal L2 packet transmission. */ #define TX_BD_LONG_TYPE_TX_BD_LONG UINT32_C(0x10) /* * If set to 1, the packet ends with the data in the buffer * pointed to by this descriptor. This flag must be valid on * every BD. */ #define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40) /* * If set to 1, the device will not generate a completion for * this transmit packet unless there is an error in it's * processing. If this bit is set to 0, then the packet will be * completed normally. This bit must be valid only on the first * BD of a packet. */ #define TX_BD_LONG_FLAGS_NO_CMPL UINT32_C(0x80) /* * This value indicates how many 16B BD locations are consumed * in the ring by this packet. A value of 1 indicates that this * BD is the only BD (and that the it is a short BD). A value of * 3 indicates either 3 short BDs or 1 long BD and one short BD * in the packet. A value of 0 indicates that there are 32 BD * locations in the packet (the maximum). This field is valid * only on the first BD of a packet. */ #define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) #define TX_BD_LONG_FLAGS_BD_CNT_SFT 8 /* * This value is a hint for the length of the entire packet. It * is used by the chip to optimize internal processing. The * packet will be dropped if the hint is too short. This field * is valid only on the first BD of a packet. */ #define TX_BD_LONG_FLAGS_LHINT_MASK UINT32_C(0x6000) #define TX_BD_LONG_FLAGS_LHINT_SFT 13 /* indicates packet length < 512B */ #define TX_BD_LONG_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) /* indicates 512 <= packet length < 1KB */ #define TX_BD_LONG_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) /* indicates 1KB <= packet length < 2KB */ #define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) /* indicates packet length >= 2KB */ #define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) #define TX_BD_LONG_FLAGS_LHINT_LAST \ TX_BD_LONG_FLAGS_LHINT_GTE2K /* * If set to 1, the device immediately updates the Send Consumer * Index after the buffer associated with this descriptor has * been transferred via DMA to NIC memory from host memory. An * interrupt may or may not be generated according to the state * of the interrupt avoidance mechanisms. If this bit is set to * 0, then the Consumer Index is only updated as soon as one of * the host interrupt coalescing conditions has been met. This * bit must be valid on the first BD of a packet. */ #define TX_BD_LONG_FLAGS_COAL_NOW UINT32_C(0x8000) /* * All bits in this field must be valid on the first BD of a * packet. Only the packet_end bit must be valid for the * remaining BDs of a packet. */ #define TX_BD_LONG_FLAGS_MASK UINT32_C(0xffc0) #define TX_BD_LONG_FLAGS_SFT 6 uint16_t len; /* * This is the length of the host physical buffer this BD * describes in bytes. This field must be valid on all BDs of a * packet. */ uint32_t opaque; /* * The opaque data field is pass through to the completion and * can be used for any data that the driver wants to associate * with the transmit BD. This field must be valid on the first * BD of a packet. */ uint64_t addr; /* * This is the host physical address for the portion of the * packet described by this TX BD. This value must be valid on * all BDs of a packet. */ } __attribute__((packed)); /* last 16 bytes of Long TX BD */ struct tx_bd_long_hi { uint16_t lflags; /* * All bits in this field must be valid on the first BD of a * packet. Their value on other BDs of the packet will be * ignored. */ /* * If set to 1, the controller replaces the TCP/UPD checksum * fields of normal TCP/UPD checksum, or the inner TCP/UDP * checksum field of the encapsulated TCP/UDP packets with the * hardware calculated TCP/UDP checksum for the packet * associated with this descriptor. The flag is ignored if the * LSO flag is set. This bit must be valid on the first BD of a * packet. */ #define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1) /* * If set to 1, the controller replaces the IP checksum of the * normal packets, or the inner IP checksum of the encapsulated * packets with the hardware calculated IP checksum for the * packet associated with this descriptor. This bit must be * valid on the first BD of a packet. */ #define TX_BD_LONG_LFLAGS_IP_CHKSUM UINT32_C(0x2) /* * If set to 1, the controller will not append an Ethernet CRC * to the end of the frame. This bit must be valid on the first * BD of a packet. Packet must be 64B or longer when this flag * is set. It is not useful to use this bit with any form of TX * offload such as CSO or LSO. The intent is that the packet * from the host already has a valid Ethernet CRC on the packet. */ #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4) /* * If set to 1, the device will record the time at which the * packet was actually transmitted at the TX MAC. This bit must * be valid on the first BD of a packet. */ #define TX_BD_LONG_LFLAGS_STAMP UINT32_C(0x8) /* * If set to 1, The controller replaces the tunnel IP checksum * field with hardware calculated IP checksum for the IP header * of the packet associated with this descriptor. For outer UDP * checksum, global outer UDP checksum TE_NIC register needs to * be enabled. If the global outer UDP checksum TE_NIC register * bit is set, outer UDP checksum will be calculated for the * following cases: 1. Packets with tcp_udp_chksum flag set to * offload checksum for inner packet AND the inner packet is * TCP/UDP. If the inner packet is ICMP for example (non- * TCP/UDP), even if the tcp_udp_chksum is set, the outer UDP * checksum will not be calculated. 2. Packets with lso flag set * which implies inner TCP checksum calculation as part of LSO * operation. */ #define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10) /* * If set to 1, the device will treat this packet with LSO(Large * Send Offload) processing for both normal or encapsulated * packets, which is a form of TCP segmentation. When this bit * is 1, the hdr_size and mss fields must be valid. The driver * doesn't need to set t_ip_chksum, ip_chksum, and * tcp_udp_chksum flags since the controller will replace the * appropriate checksum fields for segmented packets. When this * bit is 1, the hdr_size and mss fields must be valid. */ #define TX_BD_LONG_LFLAGS_LSO UINT32_C(0x20) /* * If set to zero when LSO is '1', then the IPID will be treated * as a 16b number and will be wrapped if it exceeds a value of * 0xffff. If set to one when LSO is '1', then the IPID will be * treated as a 15b number and will be wrapped if it exceeds a * value 0f 0x7fff. */ #define TX_BD_LONG_LFLAGS_IPID_FMT UINT32_C(0x40) /* * If set to zero when LSO is '1', then the IPID of the tunnel * IP header will not be modified during LSO operations. If set * to one when LSO is '1', then the IPID of the tunnel IP header * will be incremented for each subsequent segment of an LSO * operation. The flag is ignored if the LSO packet is a normal * (non-tunneled) TCP packet. */ #define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80) /* * If set to '1', then the RoCE ICRC will be appended to the * packet. Packet must be a valid RoCE format packet. */ #define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100) /* * If set to '1', then the FCoE CRC will be appended to the * packet. Packet must be a valid FCoE format packet. */ #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200) uint16_t hdr_size; /* * When LSO is '1', this field must contain the offset of the * TCP payload from the beginning of the packet in as 16b words. * In case of encapsulated/tunneling packet, this field contains * the offset of the inner TCP payload from beginning of the * packet as 16-bit words. This value must be valid on the first * BD of a packet. */ #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff) #define TX_BD_LONG_HDR_SIZE_SFT 0 uint32_t mss; /* * This is the MSS value that will be used to do the LSO * processing. The value is the length in bytes of the TCP * payload for each segment generated by the LSO operation. This * value must be valid on the first BD of a packet. */ #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff) #define TX_BD_LONG_MSS_SFT 0 uint16_t unused_2; uint16_t cfa_action; /* * This value selects a CFA action to perform on the packet. Set * this value to zero if no CFA action is desired. This value * must be valid on the first BD of a packet. */ uint32_t cfa_meta; /* * This value is action meta-data that defines CFA edit * operations that are done in addition to any action editing. */ /* When key=1, This is the VLAN tag VID value. */ #define TX_BD_LONG_CFA_META_VLAN_VID_MASK UINT32_C(0xfff) #define TX_BD_LONG_CFA_META_VLAN_VID_SFT 0 /* When key=1, This is the VLAN tag DE value. */ #define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000) /* When key=1, This is the VLAN tag PRI value. */ #define TX_BD_LONG_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000) #define TX_BD_LONG_CFA_META_VLAN_PRI_SFT 13 /* When key=1, This is the VLAN tag TPID select value. */ #define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000) #define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16 /* 0x88a8 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16) /* 0x8100 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16) /* 0x9100 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16) /* 0x9200 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16) /* 0x9300 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16) /* Value programmed in CFA VLANTPID register. */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16) #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \ TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG /* When key=1, This is the VLAN tag TPID select value. */ #define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000) #define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT 19 /* * This field identifies the type of edit to be performed on the * packet. This value must be valid on the first BD of a packet. */ #define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000) #define TX_BD_LONG_CFA_META_KEY_SFT 28 /* No editing */ #define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28) /* * - meta[17:16] - TPID select value (0 = * 0x8100). - meta[15:12] - PRI/DE value. - * meta[11:0] - VID value. */ #define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28) #define TX_BD_LONG_CFA_META_KEY_LAST \ TX_BD_LONG_CFA_META_KEY_VLAN_TAG } __attribute__((packed)); /* RX Producer Packet BD (16 bytes) */ struct rx_prod_pkt_bd { uint16_t flags_type; /* This value identifies the type of buffer descriptor. */ #define RX_PROD_PKT_BD_TYPE_MASK UINT32_C(0x3f) #define RX_PROD_PKT_BD_TYPE_SFT 0 /* * Indicates that this BD is 16B long and is an * RX Producer (ie. empty) buffer descriptor. */ #define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4) /* * If set to 1, the packet will be placed at the address plus * 2B. The 2 Bytes of padding will be written as zero. */ /* * This is intended to be used when the host buffer is cache- * line aligned to produce packets that are easy to parse in * host memory while still allowing writes to be cache line * aligned. */ #define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40) /* * If set to 1, the packet write will be padded out to the * nearest cache-line with zero value padding. */ /* * If receive buffers start/end on cache-line boundaries, this * feature will ensure that all data writes on the PCI bus * start/end on cache line boundaries. */ #define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80) /* * This value is the number of additional buffers in the ring * that describe the buffer space to be consumed for the this * packet. If the value is zero, then the packet must fit within * the space described by this BD. If this value is 1 or more, * it indicates how many additional "buffer" BDs are in the ring * immediately following this BD to be used for the same network * packet. Even if the packet to be placed does not need all the * additional buffers, they will be consumed anyway. */ #define RX_PROD_PKT_BD_FLAGS_BUFFERS_MASK UINT32_C(0x300) #define RX_PROD_PKT_BD_FLAGS_BUFFERS_SFT 8 #define RX_PROD_PKT_BD_FLAGS_MASK UINT32_C(0xffc0) #define RX_PROD_PKT_BD_FLAGS_SFT 6 uint16_t len; /* * This is the length in Bytes of the host physical buffer where * data for the packet may be placed in host memory. */ /* * While this is a Byte resolution value, it is often * advantageous to ensure that the buffers provided end on a * host cache line. */ uint32_t opaque; /* * The opaque data field is pass through to the completion and * can be used for any data that the driver wants to associate * with this receive buffer set. */ uint64_t addr; /* * This is the host physical address where data for the packet * may by placed in host memory. */ /* * While this is a Byte resolution value, it is often * advantageous to ensure that the buffers provide start on a * host cache line. */ } __attribute__((packed)); /* Completion Ring Structures */ /* Note: This structure is used by the HWRM to communicate HWRM Error. */ /* Base Completion Record (16 bytes) */ struct cmpl_base { uint16_t type; /* unused is 10 b */ /* * This field indicates the exact type of the completion. By * convention, the LSB identifies the length of the record in * 16B units. Even values indicate 16B records. Odd values * indicate 32B records. */ #define CMPL_BASE_TYPE_MASK UINT32_C(0x3f) #define CMPL_BASE_TYPE_SFT 0 /* TX L2 completion: Completion of TX packet. Length = 16B */ #define CMPL_BASE_TYPE_TX_L2 UINT32_C(0x0) /* * RX L2 completion: Completion of and L2 RX * packet. Length = 32B */ #define CMPL_BASE_TYPE_RX_L2 UINT32_C(0x11) /* * RX Aggregation Buffer completion : Completion * of an L2 aggregation buffer in support of * TPA, HDS, or Jumbo packet completion. Length * = 16B */ #define CMPL_BASE_TYPE_RX_AGG UINT32_C(0x12) /* * RX L2 TPA Start Completion: Completion at the * beginning of a TPA operation. Length = 32B */ #define CMPL_BASE_TYPE_RX_TPA_START UINT32_C(0x13) /* * RX L2 TPA End Completion: Completion at the * end of a TPA operation. Length = 32B */ #define CMPL_BASE_TYPE_RX_TPA_END UINT32_C(0x15) /* * Statistics Ejection Completion: Completion of * statistics data ejection buffer. Length = 16B */ #define CMPL_BASE_TYPE_STAT_EJECT UINT32_C(0x1a) /* HWRM Command Completion: Completion of an HWRM command. */ #define CMPL_BASE_TYPE_HWRM_DONE UINT32_C(0x20) /* Forwarded HWRM Request */ #define CMPL_BASE_TYPE_HWRM_FWD_REQ UINT32_C(0x22) /* Forwarded HWRM Response */ #define CMPL_BASE_TYPE_HWRM_FWD_RESP UINT32_C(0x24) /* HWRM Asynchronous Event Information */ #define CMPL_BASE_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e) /* CQ Notification */ #define CMPL_BASE_TYPE_CQ_NOTIFICATION UINT32_C(0x30) /* SRQ Threshold Event */ #define CMPL_BASE_TYPE_SRQ_EVENT UINT32_C(0x32) /* DBQ Threshold Event */ #define CMPL_BASE_TYPE_DBQ_EVENT UINT32_C(0x34) /* QP Async Notification */ #define CMPL_BASE_TYPE_QP_EVENT UINT32_C(0x38) /* Function Async Notification */ #define CMPL_BASE_TYPE_FUNC_EVENT UINT32_C(0x3a) /* unused is 10 b */ uint16_t info1; /* info1 is 16 b */ uint32_t info2; /* info2 is 32 b */ uint32_t info3_v; /* info3 is 31 b */ /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define CMPL_BASE_V UINT32_C(0x1) /* info3 is 31 b */ #define CMPL_BASE_INFO3_MASK UINT32_C(0xfffffffe) #define CMPL_BASE_INFO3_SFT 1 uint32_t info4; /* info4 is 32 b */ } __attribute__((packed)); /* TX Completion Record (16 bytes) */ struct tx_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. By * convention, the LSB identifies the length of the record in * 16B units. Even values indicate 16B records. Odd values * indicate 32B records. */ #define TX_CMPL_TYPE_MASK UINT32_C(0x3f) #define TX_CMPL_TYPE_SFT 0 /* TX L2 completion: Completion of TX packet. Length = 16B */ #define TX_CMPL_TYPE_TX_L2 UINT32_C(0x0) /* * When this bit is '1', it indicates a packet that has an error * of some type. Type of error is indicated in error_flags. */ #define TX_CMPL_FLAGS_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet completed * was transmitted using the push acceleration data provided by * the driver. When this bit is '0', it indicates that the * packet had not push acceleration data written or was executed * as a normal packet even though push data was provided. */ #define TX_CMPL_FLAGS_PUSH UINT32_C(0x80) #define TX_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define TX_CMPL_FLAGS_SFT 6 uint16_t unused_0; /* unused1 is 16 b */ uint32_t opaque; /* * This is a copy of the opaque field from the first TX BD of * this transmitted packet. */ uint16_t errors_v; /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define TX_CMPL_V UINT32_C(0x1) /* * This error indicates that there was some sort of problem with * the BDs for the packet. */ #define TX_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) #define TX_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* No error */ #define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1) /* Bad Format: BDs were not formatted correctly. */ #define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1) #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \ TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT /* * When this bit is '1', it indicates that the length of the * packet was zero. No packet was transmitted. */ #define TX_CMPL_ERRORS_ZERO_LENGTH_PKT UINT32_C(0x10) /* * When this bit is '1', it indicates that the packet was longer * than the programmed limit in TDI. No packet was transmitted. */ #define TX_CMPL_ERRORS_EXCESSIVE_BD_LENGTH UINT32_C(0x20) /* * When this bit is '1', it indicates that one or more of the * BDs associated with this packet generated a PCI error. This * probably means the address was not valid. */ #define TX_CMPL_ERRORS_DMA_ERROR UINT32_C(0x40) /* * When this bit is '1', it indicates that the packet was longer * than indicated by the hint. No packet was transmitted. */ #define TX_CMPL_ERRORS_HINT_TOO_SHORT UINT32_C(0x80) /* * When this bit is '1', it indicates that the packet was * dropped due to Poison TLP error on one or more of the TLPs in * the PXP completion. */ #define TX_CMPL_ERRORS_POISON_TLP_ERROR UINT32_C(0x100) #define TX_CMPL_ERRORS_MASK UINT32_C(0xfffe) #define TX_CMPL_ERRORS_SFT 1 uint16_t unused_1; /* unused2 is 16 b */ uint32_t unused_2; /* unused3 is 32 b */ } __attribute__((packed)); /* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */ struct rx_pkt_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. By * convention, the LSB identifies the length of the record in * 16B units. Even values indicate 16B records. Odd values * indicate 32B records. */ #define RX_PKT_CMPL_TYPE_MASK UINT32_C(0x3f) #define RX_PKT_CMPL_TYPE_SFT 0 /* * RX L2 completion: Completion of and L2 RX * packet. Length = 32B */ #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11) /* * When this bit is '1', it indicates a packet that has an error * of some type. Type of error is indicated in error_flags. */ #define RX_PKT_CMPL_FLAGS_ERROR UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) #define RX_PKT_CMPL_FLAGS_PLACEMENT_SFT 7 /* Normal: Packet was placed using normal algorithm. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_NORMAL (UINT32_C(0x0) << 7) /* Jumbo: Packet was placed using jumbo algorithm. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7) /* * Header/Data Separation: Packet was placed * using Header/Data separation algorithm. The * separation location is indicated by the itype * field. */ #define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7) #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \ RX_PKT_CMPL_FLAGS_PLACEMENT_HDS /* This bit is '1' if the RSS field in this completion is valid. */ #define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) /* unused is 1 b */ #define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800) /* * This value indicates what the inner packet determined for the * packet was. */ #define RX_PKT_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) #define RX_PKT_CMPL_FLAGS_ITYPE_SFT 12 /* Not Known: Indicates that the packet type was not known. */ #define RX_PKT_CMPL_FLAGS_ITYPE_NOT_KNOWN (UINT32_C(0x0) << 12) /* * IP Packet: Indicates that the packet was an * IP packet, but further classification was not * possible. */ #define RX_PKT_CMPL_FLAGS_ITYPE_IP (UINT32_C(0x1) << 12) /* * TCP Packet: Indicates that the packet was IP * and TCP. This indicates that the * payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12) /* * UDP Packet: Indicates that the packet was IP * and UDP. This indicates that the * payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_UDP (UINT32_C(0x3) << 12) /* * FCoE Packet: Indicates that the packet was * recognized as a FCoE. This also indicates * that the payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_FCOE (UINT32_C(0x4) << 12) /* * RoCE Packet: Indicates that the packet was * recognized as a RoCE. This also indicates * that the payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_ROCE (UINT32_C(0x5) << 12) /* * ICMP Packet: Indicates that the packet was * recognized as ICMP. This indicates that the * payload_offset field is valid. */ #define RX_PKT_CMPL_FLAGS_ITYPE_ICMP (UINT32_C(0x7) << 12) /* * PtP packet wo/timestamp: Indicates that the * packet was recognized as a PtP packet. */ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_WO_TIMESTAMP (UINT32_C(0x8) << 12) /* * PtP packet w/timestamp: Indicates that the * packet was recognized as a PtP packet and * that a timestamp was taken for the packet. */ #define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP (UINT32_C(0x9) << 12) #define RX_PKT_CMPL_FLAGS_ITYPE_LAST \ RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP #define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define RX_PKT_CMPL_FLAGS_SFT 6 uint16_t len; /* * This is the length of the data for the packet stored in the * buffer(s) identified by the opaque value. This includes the * packet BD and any associated buffer BDs. This does not * include the the length of any data places in aggregation BDs. */ uint32_t opaque; /* * This is a copy of the opaque field from the RX BD this * completion corresponds to. */ uint8_t agg_bufs_v1; /* unused1 is 2 b */ /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V1 UINT32_C(0x1) /* * This value is the number of aggregation buffers that follow * this entry in the completion ring that are a part of this * packet. If the value is zero, then the packet is completely * contained in the buffer space provided for the packet in the * RX ring. */ #define RX_PKT_CMPL_AGG_BUFS_MASK UINT32_C(0x3e) #define RX_PKT_CMPL_AGG_BUFS_SFT 1 /* unused1 is 2 b */ uint8_t rss_hash_type; /* * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]} * . The value of tuple_extrac_op provides the information about * what fields the hash was computed on. * 0: The RSS hash was * computed over source IP address, destination IP address, * source port, and destination port of inner IP and TCP or UDP * headers. Note: For non-tunneled packets, the packet headers * are considered inner packet headers for the RSS hash * computation purpose. * 1: The RSS hash was computed over * source IP address and destination IP address of inner IP * header. Note: For non-tunneled packets, the packet headers * are considered inner packet headers for the RSS hash * computation purpose. * 2: The RSS hash was computed over * source IP address, destination IP address, source port, and * destination port of IP and TCP or UDP headers of outer tunnel * headers. Note: For non-tunneled packets, this value is not * applicable. * 3: The RSS hash was computed over source IP * address and destination IP address of IP header of outer * tunnel headers. Note: For non-tunneled packets, this value is * not applicable. Note that 4-tuples values listed above are * applicable for layer 4 protocols supported and enabled for * RSS in the hardware, HWRM firmware, and drivers. For example, * if RSS hash is supported and enabled for TCP traffic only, * then the values of tuple_extract_op corresponding to 4-tuples * are only valid for TCP traffic. */ uint8_t payload_offset; /* * This value indicates the offset in bytes from the beginning * of the packet where the inner payload starts. This value is * valid for TCP, UDP, FCoE, and RoCE packets. A value of zero * indicates that header is 256B into the packet. */ uint8_t unused_1; /* unused2 is 8 b */ uint32_t rss_hash; /* * This value is the RSS hash value calculated for the packet * based on the mode bits and key value in the VNIC. */ } __attribute__((packed)); /* last 16 bytes of RX Packet Completion Record */ struct rx_pkt_cmpl_hi { uint32_t flags2; /* * This indicates that the ip checksum was calculated for the * inner packet and that the ip_cs_error field indicates if * there was an error. */ #define RX_PKT_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) /* * This indicates that the TCP, UDP or ICMP checksum was * calculated for the inner packet and that the l4_cs_error * field indicates if there was an error. */ #define RX_PKT_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) /* * This indicates that the ip checksum was calculated for the * tunnel header and that the t_ip_cs_error field indicates if * there was an error. */ #define RX_PKT_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) /* * This indicates that the UDP checksum was calculated for the * tunnel packet and that the t_l4_cs_error field indicates if * there was an error. */ #define RX_PKT_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) /* This value indicates what format the metadata field is. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) #define RX_PKT_CMPL_FLAGS2_META_FORMAT_SFT 4 /* No metadata informtaion. Value is zero. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4) /* * The metadata field contains the VLAN tag and * TPID value. - metadata[11:0] contains the * vlan VID value. - metadata[12] contains the * vlan DE value. - metadata[15:13] contains the * vlan PRI value. - metadata[31:16] contains * the vlan TPID value. */ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4) #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \ RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN /* * This field indicates the IP type for the inner-most IP * header. A value of '0' indicates IPv4. A value of '1' * indicates IPv6. This value is only valid if itype indicates a * packet with an IP header. */ #define RX_PKT_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) uint32_t metadata; /* * This is data from the CFA block as indicated by the * meta_format field. */ /* When meta_format=1, this value is the VLAN VID. */ #define RX_PKT_CMPL_METADATA_VID_MASK UINT32_C(0xfff) #define RX_PKT_CMPL_METADATA_VID_SFT 0 /* When meta_format=1, this value is the VLAN DE. */ #define RX_PKT_CMPL_METADATA_DE UINT32_C(0x1000) /* When meta_format=1, this value is the VLAN PRI. */ #define RX_PKT_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) #define RX_PKT_CMPL_METADATA_PRI_SFT 13 /* When meta_format=1, this value is the VLAN TPID. */ #define RX_PKT_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) #define RX_PKT_CMPL_METADATA_TPID_SFT 16 uint16_t errors_v2; /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define RX_PKT_CMPL_V2 UINT32_C(0x1) /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the * packet was already placed. The packet should be treated as * invalid. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* No buffer error */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NO_BUFFER (UINT32_C(0x0) << 1) /* * Did Not Fit: Packet did not fit into packet * buffer provided. For regular placement, this * means the packet did not fit in the buffer * provided. For HDS and jumbo placement, this * means that the packet could not be placed * into 7 physical buffers or less. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \ (UINT32_C(0x1) << 1) /* * Not On Chip: All BDs needed for the packet * were not on-chip when the packet arrived. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ (UINT32_C(0x2) << 1) /* Bad Format: BDs were not formatted correctly. */ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \ (UINT32_C(0x3) << 1) #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \ RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT /* This indicates that there was an error in the IP header checksum. */ #define RX_PKT_CMPL_ERRORS_IP_CS_ERROR UINT32_C(0x10) /* * This indicates that there was an error in the TCP, UDP or * ICMP checksum. */ #define RX_PKT_CMPL_ERRORS_L4_CS_ERROR UINT32_C(0x20) /* * This indicates that there was an error in the tunnel IP * header checksum. */ #define RX_PKT_CMPL_ERRORS_T_IP_CS_ERROR UINT32_C(0x40) /* * This indicates that there was an error in the tunnel UDP * checksum. */ #define RX_PKT_CMPL_ERRORS_T_L4_CS_ERROR UINT32_C(0x80) /* * This indicates that there was a CRC error on either an FCoE * or RoCE packet. The itype indicates the packet type. */ #define RX_PKT_CMPL_ERRORS_CRC_ERROR UINT32_C(0x100) /* * This indicates that there was an error in the tunnel portion * of the packet when this field is non-zero. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_MASK UINT32_C(0xe00) #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_SFT 9 /* * No additional error occurred on the tunnel * portion of the packet of the packet does not * have a tunnel. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 9) /* * Indicates that IP header version does not * match expectation from L2 Ethertype for IPv4 * and IPv6 in the tunnel header. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \ (UINT32_C(0x1) << 9) /* * Indicates that header length is out of range * in the tunnel header. Valid for IPv4. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \ (UINT32_C(0x2) << 9) /* * Indicates that the physical packet is shorter * than that claimed by the PPPoE header length * for a tunnel PPPoE packet. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \ (UINT32_C(0x3) << 9) /* * Indicates that physical packet is shorter * than that claimed by the tunnel l3 header * length. Valid for IPv4, or IPv6 tunnel packet * packets. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \ (UINT32_C(0x4) << 9) /* * Indicates that the physical packet is shorter * than that claimed by the tunnel UDP header * length for a tunnel UDP packet that is not * fragmented. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \ (UINT32_C(0x5) << 9) /* * indicates that the IPv4 TTL or IPv6 hop limit * check have failed (e.g. TTL = 0) in the * tunnel header. Valid for IPv4, and IPv6. */ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \ (UINT32_C(0x6) << 9) #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \ RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL /* * This indicates that there was an error in the inner portion * of the packet when this field is non-zero. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_MASK UINT32_C(0xf000) #define RX_PKT_CMPL_ERRORS_PKT_ERROR_SFT 12 /* * No additional error occurred on the tunnel * portion of the packet of the packet does not * have a tunnel. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_NO_ERROR (UINT32_C(0x0) << 12) /* * Indicates that IP header version does not * match expectation from L2 Ethertype for IPv4 * and IPv6 or that option other than VFT was * parsed on FCoE packet. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \ (UINT32_C(0x1) << 12) /* * indicates that header length is out of range. * Valid for IPv4 and RoCE */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \ (UINT32_C(0x2) << 12) /* * indicates that the IPv4 TTL or IPv6 hop limit * check have failed (e.g. TTL = 0). Valid for * IPv4, and IPv6 */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL (UINT32_C(0x3) << 12) /* * Indicates that physical packet is shorter * than that claimed by the l3 header length. * Valid for IPv4, IPv6 packet or RoCE packets. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \ (UINT32_C(0x4) << 12) /* * Indicates that the physical packet is shorter * than that claimed by the UDP header length * for a UDP packet that is not fragmented. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \ (UINT32_C(0x5) << 12) /* * Indicates that TCP header length > IP * payload. Valid for TCP packets only. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \ (UINT32_C(0x6) << 12) /* Indicates that TCP header length < 5. Valid for TCP. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \ (UINT32_C(0x7) << 12) /* * Indicates that TCP option headers result in a * TCP header size that does not match data * offset in TCP header. Valid for TCP. */ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \ (UINT32_C(0x8) << 12) #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \ RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN #define RX_PKT_CMPL_ERRORS_MASK UINT32_C(0xfffe) #define RX_PKT_CMPL_ERRORS_SFT 1 uint16_t cfa_code; /* * This field identifies the CFA action rule that was used for * this packet. */ uint32_t reorder; /* * This value holds the reordering sequence number for the * packet. If the reordering sequence is not valid, then this * value is zero. The reordering domain for the packet is in the * bottom 8 to 10b of the rss_hash value. The bottom 20b of this * value contain the ordering domain value for the packet. */ #define RX_PKT_CMPL_REORDER_MASK UINT32_C(0xffffff) #define RX_PKT_CMPL_REORDER_SFT 0 } __attribute__((packed)); /* RX L2 TPA Start Completion Record (32 bytes split to 2 16-byte struct) */ struct rx_tpa_start_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. By * convention, the LSB identifies the length of the record in * 16B units. Even values indicate 16B records. Odd values * indicate 32B records. */ #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f) #define RX_TPA_START_CMPL_TYPE_SFT 0 /* * RX L2 TPA Start Completion: Completion at the * beginning of a TPA operation. Length = 32B */ #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13) /* This bit will always be '0' for TPA start completions. */ #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: TPA Packet was placed using jumbo * algorithm. This means that the first buffer * will be filled with data before moving to * aggregation buffers. Each aggregation buffer * will be filled before moving to the next * aggregation buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7) /* * Header/Data Separation: Packet was placed * using Header/Data separation algorithm. The * separation location is indicated by the itype * field. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7) /* * GRO/Jumbo: Packet will be placed using * GRO/Jumbo where the first packet is filled * with data. Subsequent packets will be placed * such that any one packet does not span two * aggregation buffers unless it starts at the * beginning of an aggregation buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \ (UINT32_C(0x5) << 7) /* * GRO/Header-Data Separation: Packet will be * placed using GRO/HDS where the header is in * the first packet. Payload of each packet will * be placed such that any one packet does not * span two aggregation buffers unless it starts * at the beginning of an aggregation buffer. */ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7) #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \ RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS /* This bit is '1' if the RSS field in this completion is valid. */ #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400) /* unused is 1 b */ #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800) /* * This value indicates what the inner packet determined for the * packet was. */ #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12 /* TCP Packet: Indicates that the packet was IP and TCP. */ #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12) #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \ RX_TPA_START_CMPL_FLAGS_ITYPE_TCP #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define RX_TPA_START_CMPL_FLAGS_SFT 6 uint16_t len; /* * This value indicates the amount of packet data written to the * buffer the opaque field in this completion corresponds to. */ uint32_t opaque; /* * This is a copy of the opaque field from the RX BD this * completion corresponds to. */ uint8_t v1; /* unused1 is 7 b */ /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define RX_TPA_START_CMPL_V1 UINT32_C(0x1) /* unused1 is 7 b */ uint8_t rss_hash_type; /* * This is the RSS hash type for the packet. The value is packed * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]} * . The value of tuple_extrac_op provides the information about * what fields the hash was computed on. * 0: The RSS hash was * computed over source IP address, destination IP address, * source port, and destination port of inner IP and TCP or UDP * headers. Note: For non-tunneled packets, the packet headers * are considered inner packet headers for the RSS hash * computation purpose. * 1: The RSS hash was computed over * source IP address and destination IP address of inner IP * header. Note: For non-tunneled packets, the packet headers * are considered inner packet headers for the RSS hash * computation purpose. * 2: The RSS hash was computed over * source IP address, destination IP address, source port, and * destination port of IP and TCP or UDP headers of outer tunnel * headers. Note: For non-tunneled packets, this value is not * applicable. * 3: The RSS hash was computed over source IP * address and destination IP address of IP header of outer * tunnel headers. Note: For non-tunneled packets, this value is * not applicable. Note that 4-tuples values listed above are * applicable for layer 4 protocols supported and enabled for * RSS in the hardware, HWRM firmware, and drivers. For example, * if RSS hash is supported and enabled for TCP traffic only, * then the values of tuple_extract_op corresponding to 4-tuples * are only valid for TCP traffic. */ uint16_t agg_id; /* * This is the aggregation ID that the completion is associated * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ /* unused2 is 9 b */ /* * This is the aggregation ID that the completion is associated * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00) #define RX_TPA_START_CMPL_AGG_ID_SFT 9 uint32_t rss_hash; /* * This value is the RSS hash value calculated for the packet * based on the mode bits and key value in the VNIC. */ } __attribute__((packed)); /* last 16 bytes of RX L2 TPA Start Completion Record */ struct rx_tpa_start_cmpl_hi { uint32_t flags2; /* * This indicates that the ip checksum was calculated for the * inner packet and that the sum passed for all segments * included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1) /* * This indicates that the TCP, UDP or ICMP checksum was * calculated for the inner packet and that the sum passed for * all segments included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2) /* * This indicates that the ip checksum was calculated for the * tunnel header and that the sum passed for all segments * included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4) /* * This indicates that the UDP checksum was calculated for the * tunnel packet and that the sum passed for all segments * included in the aggregation. */ #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8) /* This value indicates what format the metadata field is. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0) #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4 /* No metadata informtaion. Value is zero. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4) /* * The metadata field contains the VLAN tag and * TPID value. - metadata[11:0] contains the * vlan VID value. - metadata[12] contains the * vlan DE value. - metadata[15:13] contains the * vlan PRI value. - metadata[31:16] contains * the vlan TPID value. */ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4) #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \ RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN /* * This field indicates the IP type for the inner-most IP * header. A value of '0' indicates IPv4. A value of '1' * indicates IPv6. */ #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100) uint32_t metadata; /* * This is data from the CFA block as indicated by the * meta_format field. */ /* When meta_format=1, this value is the VLAN VID. */ #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff) #define RX_TPA_START_CMPL_METADATA_VID_SFT 0 /* When meta_format=1, this value is the VLAN DE. */ #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000) /* When meta_format=1, this value is the VLAN PRI. */ #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000) #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13 /* When meta_format=1, this value is the VLAN TPID. */ #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000) #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16 uint16_t v2; /* unused4 is 15 b */ /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define RX_TPA_START_CMPL_V2 UINT32_C(0x1) /* unused4 is 15 b */ uint16_t cfa_code; /* * This field identifies the CFA action rule that was used for * this packet. */ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset; /* * This is the size in bytes of the inner most L4 header. This * can be subtracted from the payload_offset to determine the * start of the inner most L4 header. */ /* * This is the offset from the beginning of the packet in bytes * for the outer L3 header. If there is no outer L3 header, then * this value is zero. */ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff) #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0 /* * This is the offset from the beginning of the packet in bytes * for the inner most L2 header. */ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00) #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9 /* * This is the offset from the beginning of the packet in bytes * for the inner most L3 header. */ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000) #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18 /* * This is the size in bytes of the inner most L4 header. This * can be subtracted from the payload_offset to determine the * start of the inner most L4 header. */ #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000) #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27 } __attribute__((packed)); /* RX TPA End Completion Record (32 bytes split to 2 16-byte struct) */ struct rx_tpa_end_cmpl { uint16_t flags_type; /* * This field indicates the exact type of the completion. By * convention, the LSB identifies the length of the record in * 16B units. Even values indicate 16B records. Odd values * indicate 32B records. */ #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f) #define RX_TPA_END_CMPL_TYPE_SFT 0 /* * RX L2 TPA End Completion: Completion at the * end of a TPA operation. Length = 32B */ #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15) /* * When this bit is '1', it indicates a packet that has an error * of some type. Type of error is indicated in error_flags. */ #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40) /* This field indicates how the packet was placed in the buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380) #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7 /* * Jumbo: TPA Packet was placed using jumbo * algorithm. This means that the first buffer * will be filled with data before moving to * aggregation buffers. Each aggregation buffer * will be filled before moving to the next * aggregation buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7) /* * Header/Data Separation: Packet was placed * using Header/Data separation algorithm. The * separation location is indicated by the itype * field. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7) /* * GRO/Jumbo: Packet will be placed using * GRO/Jumbo where the first packet is filled * with data. Subsequent packets will be placed * such that any one packet does not span two * aggregation buffers unless it starts at the * beginning of an aggregation buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO (UINT32_C(0x5) << 7) /* * GRO/Header-Data Separation: Packet will be * placed using GRO/HDS where the header is in * the first packet. Payload of each packet will * be placed such that any one packet does not * span two aggregation buffers unless it starts * at the beginning of an aggregation buffer. */ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7) #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \ RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS /* unused is 2 b */ #define RX_TPA_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00) #define RX_TPA_END_CMPL_FLAGS_UNUSED_SFT 10 /* * This value indicates what the inner packet determined for the * packet was. - 2 TCP Packet Indicates that the packet was IP * and TCP. This indicates that the ip_cs field is valid and * that the tcp_udp_cs field is valid and contains the TCP * checksum. This also indicates that the payload_offset field * is valid. */ #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000) #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12 #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0) #define RX_TPA_END_CMPL_FLAGS_SFT 6 uint16_t len; /* * This value is zero for TPA End completions. There is no data * in the buffer that corresponds to the opaque value in this * completion. */ uint32_t opaque; /* * This is a copy of the opaque field from the RX BD this * completion corresponds to. */ uint8_t agg_bufs_v1; /* unused1 is 1 b */ /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define RX_TPA_END_CMPL_V1 UINT32_C(0x1) /* * This value is the number of aggregation buffers that follow * this entry in the completion ring that are a part of this * aggregation packet. If the value is zero, then the packet is * completely contained in the buffer space provided in the * aggregation start completion. */ #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e) #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1 /* unused1 is 1 b */ uint8_t tpa_segs; /* This value is the number of segments in the TPA operation. */ uint8_t payload_offset; /* * This value indicates the offset in bytes from the beginning * of the packet where the inner payload starts. This value is * valid for TCP, UDP, FCoE, and RoCE packets. A value of zero * indicates an offset of 256 bytes. */ uint8_t agg_id; /* * This is the aggregation ID that the completion is associated * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ /* unused2 is 1 b */ /* * This is the aggregation ID that the completion is associated * with. Use this number to correlate the TPA start completion * with the TPA end completion. */ #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe) #define RX_TPA_END_CMPL_AGG_ID_SFT 1 uint32_t tsdelta; /* * For non-GRO packets, this value is the timestamp delta * between earliest and latest timestamp values for TPA packet. * If packets were not time stamped, then delta will be zero. * For GRO packets, this field is zero except for the following * sub-fields. - tsdelta[31] Timestamp present indication. When * '0', no Timestamp option is in the packet. When '1', then a * Timestamp option is present in the packet. */ } __attribute__((packed)); /* last 16 bytes of RX TPA End Completion Record */ struct rx_tpa_end_cmpl_hi { uint32_t tpa_dup_acks; /* unused3 is 28 b */ /* * This value is the number of duplicate ACKs that have been * received as part of the TPA operation. */ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf) #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0 /* unused3 is 28 b */ uint16_t tpa_seg_len; /* * This value is the valid when TPA completion is active. It * indicates the length of the longest segment of the TPA * operation for LRO mode and the length of the first segment in * GRO mode. This value may be used by GRO software to re- * construct the original packet stream from the TPA packet. * This is the length of all but the last segment for GRO. In * LRO mode this value may be used to indicate MSS size to the * stack. */ uint16_t unused_3; /* unused4 is 16 b */ uint16_t errors_v2; /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define RX_TPA_END_CMPL_V2 UINT32_C(0x1) /* * This error indicates that there was some sort of problem with * the BDs for the packet that was found after part of the * packet was already placed. The packet should be treated as * invalid. */ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe) #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1 /* * This error occurs when there is a fatal HW * problem in the chip only. It indicates that * there were not BDs on chip but that there was * adequate reservation. provided by the TPA * block. */ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \ (UINT32_C(0x2) << 1) /* * This error occurs when TPA block was not * configured to reserve adequate BDs for TPA * operations on this RX ring. All data for the * TPA operation was not placed. This error can * also be generated when the number of segments * is not programmed correctly in TPA and the 33 * total aggregation buffers allowed for the TPA * operation has been exceeded. */ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \ (UINT32_C(0x4) << 1) #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \ RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe) #define RX_TPA_END_CMPL_ERRORS_SFT 1 uint16_t unused_4; /* unused5 is 16 b */ uint32_t start_opaque; /* * This is the opaque value that was completed for the TPA start * completion that corresponds to this TPA end completion. */ } __attribute__((packed)); /* HWRM Forwarded Request (16 bytes) */ struct hwrm_fwd_req_cmpl { uint16_t req_len_type; /* Length of forwarded request in bytes. */ /* * This field indicates the exact type of the completion. By * convention, the LSB identifies the length of the record in * 16B units. Even values indicate 16B records. Odd values * indicate 32B records. */ #define HWRM_FWD_INPUT_CMPL_TYPE_MASK UINT32_C(0x3f) #define HWRM_FWD_INPUT_CMPL_TYPE_SFT 0 /* Forwarded HWRM Request */ #define HWRM_FWD_INPUT_CMPL_TYPE_HWRM_FWD_INPUT UINT32_C(0x22) /* Length of forwarded request in bytes. */ #define HWRM_FWD_REQ_CMPL_REQ_LEN_MASK UINT32_C(0xffc0) #define HWRM_FWD_REQ_CMPL_REQ_LEN_SFT 6 uint16_t source_id; /* * Source ID of this request. Typically used in forwarding * requests and responses. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - * HWRM */ uint32_t unused_0; /* unused1 is 32 b */ uint32_t req_buf_addr_v[2]; /* Address of forwarded request. */ /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define HWRM_FWD_INPUT_CMPL_V UINT32_C(0x1) /* Address of forwarded request. */ #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_MASK UINT32_C(0xfffffffe) #define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1 } __attribute__((packed)); /* HWRM Asynchronous Event Completion Record (16 bytes) */ struct hwrm_async_event_cmpl { uint16_t type; /* unused1 is 10 b */ /* * This field indicates the exact type of the completion. By * convention, the LSB identifies the length of the record in * 16B units. Even values indicate 16B records. Odd values * indicate 32B records. */ #define HWRM_ASYNC_EVENT_CMPL_TYPE_MASK UINT32_C(0x3f) #define HWRM_ASYNC_EVENT_CMPL_TYPE_SFT 0 /* HWRM Asynchronous Event Information */ #define HWRM_ASYNC_EVENT_CMPL_TYPE_HWRM_ASYNC_EVENT UINT32_C(0x2e) /* unused1 is 10 b */ uint16_t event_id; /* Identifiers of events. */ /* Link status changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE UINT32_C(0x0) /* Link MTU changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE UINT32_C(0x1) /* Link speed changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2) /* DCB Configuration changed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3) /* Port connection not allowed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED UINT32_C(0x4) /* Link speed configuration was not allowed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \ UINT32_C(0x5) /* Link speed configuration change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE UINT32_C(0x6) /* Port PHY configuration change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE UINT32_C(0x7) /* Function driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10) /* Function driver loaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD UINT32_C(0x11) /* Function FLR related processing has completed */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_FLR_PROC_CMPLT UINT32_C(0x12) /* PF driver unloaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD UINT32_C(0x20) /* PF driver loaded */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD UINT32_C(0x21) /* VF Function Level Reset (FLR) */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR UINT32_C(0x30) /* VF MAC Address Change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE UINT32_C(0x31) /* PF-VF communication channel status change. */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \ UINT32_C(0x32) /* VF Configuration Change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE UINT32_C(0x33) /* LLFC/PFC Configuration Change */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LLFC_PFC_CHANGE UINT32_C(0x34) /* HWRM Error */ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_HWRM_ERROR UINT32_C(0xff) uint32_t event_data2; /* Event specific data */ uint8_t opaque_v; /* opaque is 7 b */ /* * This value is written by the NIC such that it will be * different for each pass through the completion queue. The * even passes will write 1. The odd passes will write 0. */ #define HWRM_ASYNC_EVENT_CMPL_V UINT32_C(0x1) /* opaque is 7 b */ #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe) #define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1 uint8_t timestamp_lo; /* 8-lsb timestamp from POR (100-msec resolution) */ uint16_t timestamp_hi; /* 16-lsb timestamp from POR (100-msec resolution) */ uint32_t event_data1; /* Event specific data */ } __attribute__((packed)); /* hwrm_ver_get */ /* * Description: This function is called by a driver to determine the HWRM * interface version supported by the HWRM firmware, the version of HWRM * firmware implementation, the name of HWRM firmware, the versions of other * embedded firmwares, and the names of other embedded firmwares, etc. Any * interface or firmware version with major = 0, minor = 0, and update = 0 shall * be considered an invalid version. */ /* Input (24 bytes) */ struct hwrm_ver_get_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint8_t hwrm_intf_maj; /* * This field represents the major version of HWRM interface * specification supported by the driver HWRM implementation. * The interface major version is intended to change only when * non backward compatible changes are made to the HWRM * interface specification. */ uint8_t hwrm_intf_min; /* * This field represents the minor version of HWRM interface * specification supported by the driver HWRM implementation. A * change in interface minor version is used to reflect * significant backward compatible modification to HWRM * interface specification. This can be due to addition or * removal of functionality. HWRM interface specifications with * the same major version but different minor versions are * compatible. */ uint8_t hwrm_intf_upd; /* * This field represents the update version of HWRM interface * specification supported by the driver HWRM implementation. * The interface update version is used to reflect minor changes * or bug fixes to a released HWRM interface specification. */ uint8_t unused_0[5]; } __attribute__((packed)); /* Output (128 bytes) */ struct hwrm_ver_get_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint8_t hwrm_intf_maj; /* * This field represents the major version of HWRM interface * specification supported by the HWRM implementation. The * interface major version is intended to change only when non * backward compatible changes are made to the HWRM interface * specification. A HWRM implementation that is compliant with * this specification shall provide value of 1 in this field. */ uint8_t hwrm_intf_min; /* * This field represents the minor version of HWRM interface * specification supported by the HWRM implementation. A change * in interface minor version is used to reflect significant * backward compatible modification to HWRM interface * specification. This can be due to addition or removal of * functionality. HWRM interface specifications with the same * major version but different minor versions are compatible. A * HWRM implementation that is compliant with this specification * shall provide value of 2 in this field. */ uint8_t hwrm_intf_upd; /* * This field represents the update version of HWRM interface * specification supported by the HWRM implementation. The * interface update version is used to reflect minor changes or * bug fixes to a released HWRM interface specification. A HWRM * implementation that is compliant with this specification * shall provide value of 2 in this field. */ uint8_t hwrm_intf_rsvd; uint8_t hwrm_fw_maj; /* * This field represents the major version of HWRM firmware. A * change in firmware major version represents a major firmware * release. */ uint8_t hwrm_fw_min; /* * This field represents the minor version of HWRM firmware. A * change in firmware minor version represents significant * firmware functionality changes. */ uint8_t hwrm_fw_bld; /* * This field represents the build version of HWRM firmware. A * change in firmware build version represents bug fixes to a * released firmware. */ uint8_t hwrm_fw_rsvd; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version of the HWRM * firmware. */ uint8_t mgmt_fw_maj; /* * This field represents the major version of mgmt firmware. A * change in major version represents a major release. */ uint8_t mgmt_fw_min; /* * This field represents the minor version of mgmt firmware. A * change in minor version represents significant functionality * changes. */ uint8_t mgmt_fw_bld; /* * This field represents the build version of mgmt firmware. A * change in update version represents bug fixes. */ uint8_t mgmt_fw_rsvd; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ uint8_t netctrl_fw_maj; /* * This field represents the major version of network control * firmware. A change in major version represents a major * release. */ uint8_t netctrl_fw_min; /* * This field represents the minor version of network control * firmware. A change in minor version represents significant * functionality changes. */ uint8_t netctrl_fw_bld; /* * This field represents the build version of network control * firmware. A change in update version represents bug fixes. */ uint8_t netctrl_fw_rsvd; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ uint32_t dev_caps_cfg; /* * This field is used to indicate device's capabilities and * configurations. */ /* * If set to 1, then secure firmware update behavior is * supported. If set to 0, then secure firmware update behavior * is not supported. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED \ UINT32_C(0x1) /* * If set to 1, then firmware based DCBX agent is supported. If * set to 0, then firmware based DCBX agent capability is not * supported on this device. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, then HWRM short command format is supported. If * set to 0, then HWRM short command format is not supported. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, then HWRM short command format is required. If * set to 0, then HWRM short command format is not required. */ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_INPUTUIRED \ UINT32_C(0x8) uint8_t roce_fw_maj; /* * This field represents the major version of RoCE firmware. A * change in major version represents a major release. */ uint8_t roce_fw_min; /* * This field represents the minor version of RoCE firmware. A * change in minor version represents significant functionality * changes. */ uint8_t roce_fw_bld; /* * This field represents the build version of RoCE firmware. A * change in update version represents bug fixes. */ uint8_t roce_fw_rsvd; /* * This field is a reserved field. This field can be used to * represent firmware branches or customer specific releases * tied to a specific (major,minor,update) version */ char hwrm_fw_name[16]; /* * This field represents the name of HWRM FW (ASCII chars with * NULL at the end). */ char mgmt_fw_name[16]; /* * This field represents the name of mgmt FW (ASCII chars with * NULL at the end). */ char netctrl_fw_name[16]; /* * This field represents the name of network control firmware * (ASCII chars with NULL at the end). */ uint32_t reserved2[4]; /* * This field is reserved for future use. The responder should * set it to 0. The requester should ignore this field. */ char roce_fw_name[16]; /* * This field represents the name of RoCE FW (ASCII chars with * NULL at the end). */ uint16_t chip_num; /* This field returns the chip number. */ uint8_t chip_rev; /* This field returns the revision of chip. */ uint8_t chip_metal; /* This field returns the chip metal number. */ uint8_t chip_bond_id; /* This field returns the bond id of the chip. */ uint8_t chip_platform_type; /* * This value indicates the type of platform used for chip * implementation. */ /* ASIC */ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_ASIC UINT32_C(0x0) /* FPGA platform of the chip. */ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA UINT32_C(0x1) /* Palladium platform of the chip. */ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2) uint16_t max_req_win_len; /* * This field returns the maximum value of request window that * is supported by the HWRM. The request window is mapped into * device address space using MMIO. */ uint16_t max_resp_len; /* This field returns the maximum value of response buffer in bytes. */ uint16_t def_req_timeout; /* * This field returns the default request timeout value in * milliseconds. */ uint8_t init_pending; /* * This field will indicate if any subsystems is not fully * initialized. */ /* * If set to 1, device is not ready. If set to 0, device is * ready to accept all HWRM commands. */ #define HWRM_VER_GET_OUTPUT_INIT_PENDING_DEV_NOT_RDY UINT32_C(0x1) uint8_t unused_0; uint8_t unused_1; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_reset */ /* * Description: This command resets a hardware function (PCIe function) and * frees any resources used by the function. This command shall be initiated by * the driver after an FLR has occurred to prepare the function for re-use. This * command may also be initiated by a driver prior to doing it's own * configuration. This command puts the function into the reset state. In the * reset state, global and port related features of the chip are not available. */ /* * Note: This command will reset a function that has already been disabled or * idled. The command returns all the resources owned by the function so a new * driver may allocate and configure resources normally. */ /* Input (24 bytes) */ struct hwrm_func_reset_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the vf_id_valid field to be configured. */ #define HWRM_FUNC_RESET_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) uint16_t vf_id; /* * The ID of the VF that this PF is trying to reset. Only the * parent PF shall be allowed to reset a child VF. A parent PF * driver shall use this field only when a specific child VF is * requested to be reset. */ uint8_t func_reset_level; /* This value indicates the level of a function reset. */ /* * Reset the caller function and its children * VFs (if any). If no children functions exist, * then reset the caller function only. */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL UINT32_C(0x0) /* Reset the caller function only */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETME UINT32_C(0x1) /* * Reset all children VFs of the caller function * driver if the caller is a PF driver. It is an * error to specify this level by a VF driver. * It is an error to specify this level by a PF * driver with no children VFs. */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \ UINT32_C(0x2) /* * Reset a specific VF of the caller function * driver if the caller is the parent PF driver. * It is an error to specify this level by a VF * driver. It is an error to specify this level * by a PF driver that is not the parent of the * VF that is being requested to reset. */ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETVF UINT32_C(0x3) uint8_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_reset_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_vf_cfg */ /* * Description: This command allows configuration of a VF by its driver. If this * function is called by a PF driver, then the HWRM shall fail this command. If * guest VLAN and/or MAC address are provided in this command, then the HWRM * shall set up appropriate MAC/VLAN filters for the VF that is being * configured. A VF driver should set VF MTU/MRU using this command prior to * allocating RX VNICs or TX rings for the corresponding VF. */ /* Input (32 bytes) */ struct hwrm_func_vf_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format for the * rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request will be * optionally completed on. If the value is -1, then no CR completion * will be generated. Any other value must be a valid CR ring_id value * for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written when the * request is complete. This area must be 16B aligned and must be * cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the mtu field to be configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU UINT32_C(0x1) /* This bit must be '1' for the guest_vlan field to be configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN UINT32_C(0x2) /* * This bit must be '1' for the async_event_cr field to be configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4) /* This bit must be '1' for the dflt_mac_addr field to be configured. */ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x8) uint16_t mtu; /* * The maximum transmission unit requested on the function. The HWRM * should make sure that the mtu of the function does not exceed the mtu * of the physical port that this function is associated with. In * addition to requesting mtu per function, it is possible to configure * mtu per transmit ring. By default, the mtu of each transmit ring * associated with a function is equal to the mtu of the function. The * HWRM should make sure that the mtu of each transmit ring that is * assigned to a function has a valid mtu. */ uint16_t guest_vlan; /* * The guest VLAN for the function being configured. This field's format * is same as 802.1Q Tag's Tag Control Information (TCI) format that * includes both Priority Code Point (PCP) and VLAN Identifier (VID). */ uint16_t async_event_cr; /* * ID of the target completion ring for receiving asynchronous event * completions. If this field is not valid, then the HWRM shall use the * default completion ring of the function that is being configured as * the target completion ring for providing any asynchronous event * completions for that function. If this field is valid, then the HWRM * shall use the completion ring identified by this ID as the target * completion ring for providing any asynchronous event completions for * the function that is being configured. */ uint8_t dflt_mac_addr[6]; /* * This value is the current MAC address requested by the VF driver to * be configured on this VF. A value of 00-00-00-00-00-00 indicates no * MAC address configuration is requested by the VF driver. The parent * PF driver may reject or overwrite this MAC address. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_vf_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in parameters, * and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the output is * completely written to RAM. This field should be read as '1' to * indicate that the output has been completely written. When writing a * command completion or response to an internal processor, the order of * writes has to be such that this field is written last. */ } __attribute__((packed)); /* hwrm_func_qcaps */ /* * Description: This command returns capabilities of a function. The input FID * value is used to indicate what function is being queried. This allows a * physical function driver to query virtual functions that are children of the * physical function. The output FID value is needed to configure Rings and * MSI-X vectors so their DMA operations appear correctly on the PCI bus. */ /* Input (24 bytes) */ struct hwrm_func_qcaps_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function that is being queried. 0xFF... * (All Fs) if the query is for the requesting function. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (80 bytes) */ struct hwrm_func_qcaps_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t fid; /* * FID value. This value is used to identify operations on the * PCI bus as belonging to a particular PCI function. */ uint16_t port_id; /* * Port ID of port that this function is associated with. Valid * only for the PF. 0xFF... (All Fs) if this function is not * associated with any port. 0xFF... (All Fs) if this function * is called from a VF. */ uint32_t flags; /* If 1, then Push mode is supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1) /* * If 1, then the global MSI-X auto-masking is enabled for the * device. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \ UINT32_C(0x2) /* * If 1, then the Precision Time Protocol (PTP) processing is * supported on this function. The HWRM should enable PTP on * only a single Physical Function (PF) per port. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4) /* * If 1, then RDMA over Converged Ethernet (RoCE) v1 is * supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8) /* * If 1, then RDMA over Converged Ethernet (RoCE) v2 is * supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10) /* * If 1, then control and configuration of WoL magic packet are * supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \ UINT32_C(0x20) /* * If 1, then control and configuration of bitmap pattern packet * are supported on this function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40) /* * If set to 1, then the control and configuration of rate limit * of an allocated TX ring on the queried function is supported. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80) /* * If 1, then control and configuration of minimum and maximum * bandwidths are supported on the queried function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100) /* * If the query is for a VF, then this flag shall be ignored. If * this query is for a PF and this flag is set to 1, then the PF * has the capability to set the rate limits on the TX rings of * its children VFs. If this query is for a PF and this flag is * set to 0, then the PF does not have the capability to set the * rate limits on the TX rings of its children VFs. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \ UINT32_C(0x200) /* * If the query is for a VF, then this flag shall be ignored. If * this query is for a PF and this flag is set to 1, then the PF * has the capability to set the minimum and/or maximum * bandwidths for its children VFs. If this query is for a PF * and this flag is set to 0, then the PF does not have the * capability to set the minimum or maximum bandwidths for its * children VFs. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400) /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. If * set to 1, then standard TX ring mode is supported on the * queried function. If set to 0, then standard TX ring mode is * not available on the queried function. */ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \ UINT32_C(0x800) uint8_t mac_address[6]; /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no MAC * address is currently configured. */ uint16_t max_rsscos_ctx; /* * The maximum number of RSS/COS contexts that can be allocated * to the function. */ uint16_t max_cmpl_rings; /* * The maximum number of completion rings that can be allocated * to the function. */ uint16_t max_tx_rings; /* * The maximum number of transmit rings that can be allocated to * the function. */ uint16_t max_rx_rings; /* * The maximum number of receive rings that can be allocated to * the function. */ uint16_t max_l2_ctxs; /* * The maximum number of L2 contexts that can be allocated to * the function. */ uint16_t max_vnics; /* * The maximum number of VNICs that can be allocated to the * function. */ uint16_t first_vf_id; /* * The identifier for the first VF enabled on a PF. This is * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if * this command is called on a PF with SR-IOV disabled or on a * VF. */ uint16_t max_vfs; /* * The maximum number of VFs that can be allocated to the * function. This is valid only on the PF with SR-IOV enabled. * 0xFF... (All Fs) if this command is called on a PF with SR- * IOV disabled or on a VF. */ uint16_t max_stat_ctx; /* * The maximum number of statistic contexts that can be * allocated to the function. */ uint32_t max_encap_records; /* * The maximum number of Encapsulation records that can be * offloaded by this function. */ uint32_t max_decap_records; /* * The maximum number of decapsulation records that can be * offloaded by this function. */ uint32_t max_tx_em_flows; /* * The maximum number of Exact Match (EM) flows that can be * offloaded by this function on the TX side. */ uint32_t max_tx_wm_flows; /* * The maximum number of Wildcard Match (WM) flows that can be * offloaded by this function on the TX side. */ uint32_t max_rx_em_flows; /* * The maximum number of Exact Match (EM) flows that can be * offloaded by this function on the RX side. */ uint32_t max_rx_wm_flows; /* * The maximum number of Wildcard Match (WM) flows that can be * offloaded by this function on the RX side. */ uint32_t max_mcast_filters; /* * The maximum number of multicast filters that can be supported * by this function on the RX side. */ uint32_t max_flow_id; /* * The maximum value of flow_id that can be supported in * completion records. */ uint32_t max_hw_ring_grps; /* * The maximum number of HW ring groups that can be supported on * this function. */ uint16_t max_sp_tx_rings; /* * The maximum number of strict priority transmit rings that can * be allocated to the function. This number indicates the * maximum number of TX rings that can be assigned strict * priorities out of the maximum number of TX rings that can be * allocated (max_tx_rings) to the function. */ uint8_t unused_0; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_qcfg */ /* * Description: This command returns the current configuration of a function. * The input FID value is used to indicate what function is being queried. This * allows a physical function driver to query virtual functions that are * children of the physical function. The output FID value is needed to * configure Rings and MSI-X vectors so their DMA operations appear correctly on * the PCI bus. This command should be called by every driver after * 'hwrm_func_cfg' to get the actual number of resources allocated by the HWRM. * The values returned by hwrm_func_qcfg are the values the driver shall use. * These values may be different than what was originally requested in the * 'hwrm_func_cfg' command. */ /* Input (24 bytes) */ struct hwrm_func_qcfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function that is being queried. 0xFF... * (All Fs) if the query is for the requesting function. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (72 bytes) */ struct hwrm_func_qcfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t fid; /* * FID value. This value is used to identify operations on the * PCI bus as belonging to a particular PCI function. */ uint16_t port_id; /* * Port ID of port that this function is associated with. * 0xFF... (All Fs) if this function is not associated with any * port. */ uint16_t vlan; /* * This value is the current VLAN setting for this function. The * value of 0 for this field indicates no priority tagging or * VLAN is used. This field's format is same as 802.1Q Tag's Tag * Control Information (TCI) format that includes both Priority * Code Point (PCP) and VLAN Identifier (VID). */ uint16_t flags; /* * If 1, then magic packet based Out-Of-Box WoL is enabled on * the port associated with this function. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \ UINT32_C(0x1) /* * If 1, then bitmap pattern based Out-Of-Box WoL packet is * enabled on the port associated with this function. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_BMP_ENABLED UINT32_C(0x2) /* * If set to 1, then FW based DCBX agent is enabled and running * on the port associated with this function. If set to 0, then * DCBX agent is not running in the firmware. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \ UINT32_C(0x4) /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. If * set to 1, then standard TX ring mode is enabled on the * queried function. If set to 0, then the standard TX ring mode * is disabled on the queried function. In this extended TX ring * resource mode, the minimum and maximum bandwidth settings are * not supported to allow the allocation of TX rings to span * multiple scheduler nodes. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \ UINT32_C(0x8) /* * If set to 1 then FW based LLDP agent is enabled and running * on the port associated with this function. If set to 0 then * the LLDP agent is not running in the firmware. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED UINT32_C(0x10) /* * If set to 1, then multi-host mode is active for this * function. If set to 0, then multi-host mode is inactive for * this function or not applicable for this device. */ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST UINT32_C(0x20) uint8_t mac_address[6]; /* * This value is current MAC address configured for this * function. A value of 00-00-00-00-00-00 indicates no MAC * address is currently configured. */ uint16_t pci_id; /* * This value is current PCI ID of this function. If ARI is * enabled, then it is Bus Number (8b):Function Number(8b). * Otherwise, it is Bus Number (8b):Device Number (4b):Function * Number(4b). */ uint16_t alloc_rsscos_ctx; /* * The number of RSS/COS contexts currently allocated to the * function. */ uint16_t alloc_cmpl_rings; /* * The number of completion rings currently allocated to the * function. This does not include the rings allocated to any * children functions if any. */ uint16_t alloc_tx_rings; /* * The number of transmit rings currently allocated to the * function. This does not include the rings allocated to any * children functions if any. */ uint16_t alloc_rx_rings; /* * The number of receive rings currently allocated to the * function. This does not include the rings allocated to any * children functions if any. */ uint16_t alloc_l2_ctx; /* The allocated number of L2 contexts to the function. */ uint16_t alloc_vnics; /* The allocated number of vnics to the function. */ uint16_t mtu; /* * The maximum transmission unit of the function. For rings * allocated on this function, this default value is used if * ring MTU is not specified. */ uint16_t mru; /* * The maximum receive unit of the function. For vnics allocated * on this function, this default value is used if vnic MRU is * not specified. */ uint16_t stat_ctx_id; /* The statistics context assigned to a function. */ uint8_t port_partition_type; /* * The HWRM shall return Unknown value for this field when this * command is used to query VF's configuration. */ /* Single physical function */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_SPF UINT32_C(0x0) /* Multiple physical functions */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1) /* Network Partitioning 1.0 */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2) /* Network Partitioning 1.5 */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3) /* Network Partitioning 2.0 */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4) /* Unknown */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN UINT32_C(0xff) uint8_t port_pf_cnt; /* * This field will indicate number of physical functions on this * port_partition. HWRM shall return unavail (i.e. value of 0) * for this field when this command is used to query VF's * configuration or from older firmware that doesn't support * this field. */ /* number of PFs is not available */ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0) uint16_t dflt_vnic_id; /* The default VNIC ID assigned to a function that is being queried. */ uint16_t max_mtu_configured; /* * This value specifies the MAX MTU that can be configured by * host drivers. This 'max_mtu_configure' can be HW max MTU or * OEM applications specified value. Host drivers can't * configure the MTU greater than this value. Host drivers * should read this value prior to configuring the MTU. FW will * fail the host request with MTU greater than * 'max_mtu_configured'. */ uint32_t min_bw; /* * Minimum BW allocated for this function. The HWRM will * translate this value into byte counter and time interval used * for the scheduler inside the device. A value of 0 indicates * the minimum bandwidth is not configured. */ /* The bandwidth value. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \ FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \ FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID uint32_t max_bw; /* * Maximum BW allocated for this function. The HWRM will * translate this value into byte counter and time interval used * for the scheduler inside the device. A value of 0 indicates * that the maximum bandwidth is not configured. */ /* The bandwidth value. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \ (UINT32_C(0x1) << 28) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \ FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \ FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID uint8_t evb_mode; /* * This value indicates the Edge virtual bridge mode for the * domain that this function belongs to. */ /* No Edge Virtual Bridging (EVB) */ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0) /* Virtual Ethernet Bridge (VEB) */ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1) /* Virtual Ethernet Port Aggregator (VEPA) */ #define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2) uint8_t unused_0; uint16_t alloc_vfs; /* * The number of VFs that are allocated to the function. This is * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if * this command is called on a PF with SR-IOV disabled or on a * VF. */ uint32_t alloc_mcast_filters; /* * The number of allocated multicast filters for this function * on the RX side. */ uint32_t alloc_hw_ring_grps; /* The number of allocated HW ring groups for this function. */ uint16_t alloc_sp_tx_rings; /* * The number of strict priority transmit rings out of currently * allocated TX rings to the function (alloc_tx_rings). */ uint8_t unused_1; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_vlan_qcfg */ /* * Description: This command should be called by PF driver to get the current * C-TAG, S-TAG and correcponsing PCP and TPID values configured for the * function. */ /* Input (24 bytes) */ struct hwrm_func_vlan_qcfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function that is being configured. If set * to 0xFF... (All Fs), then the configuration is for the * requesting function. */ uint16_t unused_0[3]; }; /* Output (40 bytes) */ struct hwrm_func_vlan_qcfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ uint16_t stag_vid; /* S-TAG VLAN identifier configured for the function. */ uint8_t stag_pcp; /* S-TAG PCP value configured for the function. */ uint8_t unused_4; uint16_t stag_tpid; /* * S-TAG TPID value configured for the function. This field is * specified in network byte order. */ uint16_t ctag_vid; /* C-TAG VLAN identifier configured for the function. */ uint8_t ctag_pcp; /* C-TAG PCP value configured for the function. */ uint8_t unused_5; uint16_t ctag_tpid; /* * C-TAG TPID value configured for the function. This field is * specified in network byte order. */ uint32_t rsvd2; /* Future use. */ uint32_t rsvd3; /* Future use. */ uint32_t unused_6; }; /* hwrm_func_vlan_cfg */ /* * Description: This command allows PF driver to configure C-TAG, S-TAG and * corresponding PCP and TPID values for a function. */ /* Input (48 bytes) */ struct hwrm_func_vlan_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function that is being configured. If set * to 0xFF... (All Fs), then the configuration is for the * requesting function. */ uint8_t unused_0; uint8_t unused_1; uint32_t enables; /* This bit must be '1' for the stag_vid field to be configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1) /* This bit must be '1' for the ctag_vid field to be configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2) /* This bit must be '1' for the stag_pcp field to be configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4) /* This bit must be '1' for the ctag_pcp field to be configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8) /* This bit must be '1' for the stag_tpid field to be configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10) /* This bit must be '1' for the ctag_tpid field to be configured. */ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20) uint16_t stag_vid; /* S-TAG VLAN identifier configured for the function. */ uint8_t stag_pcp; /* S-TAG PCP value configured for the function. */ uint8_t unused_2; uint16_t stag_tpid; /* * S-TAG TPID value configured for the function. This field is * specified in network byte order. */ uint16_t ctag_vid; /* C-TAG VLAN identifier configured for the function. */ uint8_t ctag_pcp; /* C-TAG PCP value configured for the function. */ uint8_t unused_3; uint16_t ctag_tpid; /* * C-TAG TPID value configured for the function. This field is * specified in network byte order. */ uint32_t rsvd1; /* Future use. */ uint32_t rsvd2; /* Future use. */ uint32_t unused_4; }; /* Output (16 bytes) */ struct hwrm_func_vlan_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ }; /* hwrm_func_cfg */ /* * Description: This command allows configuration of a PF by the corresponding * PF driver. This command also allows configuration of a child VF by its parent * PF driver. The input FID value is used to indicate what function is being * configured. This allows a PF driver to configure the PF owned by itself or a * virtual function that is a child of the PF. This command allows to reserve * resources for a VF by its parent PF. To reverse the process, the command * should be called with all enables flags cleared for resources. This will free * allocated resources for the VF and return them to the resource pool. If this * command is requested by a VF driver to configure or reserve resources, then * the HWRM shall fail this command. If default MAC address and/or VLAN are * provided in this command, then the HWRM shall set up appropriate MAC/VLAN * filters for the function that is being configured. If source properties * checks are enabled and default MAC address and/or IP address are provided in * this command, then the HWRM shall set appropriate source property checks * based on provided MAC and/or IP addresses. The parent PF driver should not * set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by * the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the * HWRM should ignore it. A function's MTU/MRU should be set prior to allocating * RX VNICs or TX rings. A PF driver calls hwrm_func_cfg to allocate resources * for itself or its children VFs. All function drivers shall call hwrm_func_cfg * to reserve resources. A request to hwrm_func_cfg may not be fully granted; * that is, a request for resources may be larger than what can be supported by * the device and the HWRM will allocate the best set of resources available, * but that may be less than requested. If all the amounts requested could not * be fulfilled, the HWRM shall allocate what it could and return a status code * of success. A function driver should call hwrm_func_qcfg immediately after * hwrm_func_cfg to determine what resources were assigned to the configured * function. A call by a PF driver to hwrm_func_cfg to allocate resources for * itself shall only allocate resources for the PF driver to use, not for its * children VFs. Likewise, a call to hwrm_func_qcfg shall return the resources * available for the PF driver to use, not what is available to its children * VFs. */ /* Input (88 bytes) */ struct hwrm_func_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function that is being configured. If set * to 0xFF... (All Fs), then the the configuration is for the * requesting function. */ uint8_t unused_0; uint8_t unused_1; uint32_t flags; /* * When this bit is '1', the function is disabled with source * MAC address check. This is an anti-spoofing check. If this * flag is set, then the function shall be configured to * disallow transmission of frames with the source MAC address * that is configured for this function. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \ UINT32_C(0x1) /* * When this bit is '1', the function is enabled with source MAC * address check. This is an anti-spoofing check. If this flag * is set, then the function shall be configured to allow * transmission of frames with the source MAC address that is * configured for this function. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \ UINT32_C(0x2) /* reserved */ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK UINT32_C(0x1fc) #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2 /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. If * set to 1, then standard TX ring mode is requested to be * enabled on the function being configured. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \ UINT32_C(0x200) /* * Standard TX Ring mode is used for the allocation of TX ring * and underlying scheduling resources that allow bandwidth * reservation and limit settings on the queried function. If * set to 1, then the standard TX ring mode is requested to be * disabled on the function being configured. In this extended * TX ring resource mode, the minimum and maximum bandwidth * settings are not supported to allow the allocation of TX * rings to span multiple scheduler nodes. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \ UINT32_C(0x400) /* * If this bit is set, virtual mac address configured in this * command will be persistent over warm boot. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST UINT32_C(0x800) /* * This bit only applies to the VF. If this bit is set, the * statistic context counters will not be cleared when the * statistic context is freed or a function reset is called on * VF. This bit will be cleared when the PF is unloaded or a * function reset is called on the PF. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \ UINT32_C(0x1000) /* * This bit requests that the firmware test to see if all the * assets requested in this command (i.e. number of TX rings) * are available. The firmware will return an error if the * requested assets are not available. The firwmare will NOT * reserve the assets if they are available. */ #define HWRM_FUNC_CFG_INPUT_FLAGS_TX_ASSETS_TEST UINT32_C(0x2000) uint32_t enables; /* This bit must be '1' for the mtu field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1) /* This bit must be '1' for the mru field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU UINT32_C(0x2) /* * This bit must be '1' for the num_rsscos_ctxs field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS UINT32_C(0x4) /* * This bit must be '1' for the num_cmpl_rings field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS UINT32_C(0x8) /* This bit must be '1' for the num_tx_rings field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS UINT32_C(0x10) /* This bit must be '1' for the num_rx_rings field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS UINT32_C(0x20) /* This bit must be '1' for the num_l2_ctxs field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS UINT32_C(0x40) /* This bit must be '1' for the num_vnics field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS UINT32_C(0x80) /* * This bit must be '1' for the num_stat_ctxs field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS UINT32_C(0x100) /* * This bit must be '1' for the dflt_mac_addr field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x200) /* This bit must be '1' for the dflt_vlan field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN UINT32_C(0x400) /* This bit must be '1' for the dflt_ip_addr field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR UINT32_C(0x800) /* This bit must be '1' for the min_bw field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW UINT32_C(0x1000) /* This bit must be '1' for the max_bw field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW UINT32_C(0x2000) /* * This bit must be '1' for the async_event_cr field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4000) /* * This bit must be '1' for the vlan_antispoof_mode field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE UINT32_C(0x8000) /* * This bit must be '1' for the allowed_vlan_pris field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000) /* This bit must be '1' for the evb_mode field to be configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE UINT32_C(0x20000) /* * This bit must be '1' for the num_mcast_filters field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000) /* * This bit must be '1' for the num_hw_ring_grps field to be * configured. */ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000) uint16_t mtu; /* * The maximum transmission unit of the function. The HWRM * should make sure that the mtu of the function does not exceed * the mtu of the physical port that this function is associated * with. In addition to configuring mtu per function, it is * possible to configure mtu per transmit ring. By default, the * mtu of each transmit ring associated with a function is equal * to the mtu of the function. The HWRM should make sure that * the mtu of each transmit ring that is assigned to a function * has a valid mtu. */ uint16_t mru; /* * The maximum receive unit of the function. The HWRM should * make sure that the mru of the function does not exceed the * mru of the physical port that this function is associated * with. In addition to configuring mru per function, it is * possible to configure mru per vnic. By default, the mru of * each vnic associated with a function is equal to the mru of * the function. The HWRM should make sure that the mru of each * vnic that is assigned to a function has a valid mru. */ uint16_t num_rsscos_ctxs; /* The number of RSS/COS contexts requested for the function. */ uint16_t num_cmpl_rings; /* * The number of completion rings requested for the function. * This does not include the rings allocated to any children * functions if any. */ uint16_t num_tx_rings; /* * The number of transmit rings requested for the function. This * does not include the rings allocated to any children * functions if any. */ uint16_t num_rx_rings; /* * The number of receive rings requested for the function. This * does not include the rings allocated to any children * functions if any. */ uint16_t num_l2_ctxs; /* The requested number of L2 contexts for the function. */ uint16_t num_vnics; /* The requested number of vnics for the function. */ uint16_t num_stat_ctxs; /* The requested number of statistic contexts for the function. */ uint16_t num_hw_ring_grps; /* * The number of HW ring groups that should be reserved for this * function. */ uint8_t dflt_mac_addr[6]; /* The default MAC address for the function being configured. */ uint16_t dflt_vlan; /* * The default VLAN for the function being configured. This * field's format is same as 802.1Q Tag's Tag Control * Information (TCI) format that includes both Priority Code * Point (PCP) and VLAN Identifier (VID). */ uint32_t dflt_ip_addr[4]; /* * The default IP address for the function being configured. * This address is only used in enabling source property check. */ uint32_t min_bw; /* * Minimum BW allocated for this function. The HWRM will * translate this value into byte counter and time interval used * for the scheduler inside the device. */ /* The bandwidth value. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff) #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES (UINT32_C(0x1) << 28) #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \ FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \ FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID uint32_t max_bw; /* * Maximum BW allocated for this function. The HWRM will * translate this value into byte counter and time interval used * for the scheduler inside the device. */ /* The bandwidth value. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \ UINT32_C(0xfffffff) #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28) #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \ FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID uint16_t async_event_cr; /* * ID of the target completion ring for receiving asynchronous * event completions. If this field is not valid, then the HWRM * shall use the default completion ring of the function that is * being configured as the target completion ring for providing * any asynchronous event completions for that function. If this * field is valid, then the HWRM shall use the completion ring * identified by this ID as the target completion ring for * providing any asynchronous event completions for the function * that is being configured. */ uint8_t vlan_antispoof_mode; /* VLAN Anti-spoofing mode. */ /* No VLAN anti-spoofing checks are enabled */ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK UINT32_C(0x0) /* Validate VLAN against the configured VLAN(s) */ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \ UINT32_C(0x1) /* Insert VLAN if it does not exist, otherwise discard */ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \ UINT32_C(0x2) /* * Insert VLAN if it does not exist, override * VLAN if it exists */ #define \ HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \ UINT32_C(0x3) uint8_t allowed_vlan_pris; /* * This bit field defines VLAN PRIs that are allowed on this * function. If nth bit is set, then VLAN PRI n is allowed on * this function. */ uint8_t evb_mode; /* * The HWRM shall allow a PF driver to change EVB mode for the * partition it belongs to. The HWRM shall not allow a VF driver * to change the EVB mode. The HWRM shall take into account the * switching of EVB mode from one to another and reconfigure * hardware resources as appropriately. The switching from VEB * to VEPA mode requires the disabling of the loopback traffic. * Additionally, source knock outs are handled differently in * VEB and VEPA modes. */ /* No Edge Virtual Bridging (EVB) */ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0) /* Virtual Ethernet Bridge (VEB) */ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1) /* Virtual Ethernet Port Aggregator (VEPA) */ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2) uint8_t unused_2; uint16_t num_mcast_filters; /* * The number of multicast filters that should be reserved for * this function on the RX side. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_qstats */ /* * Description: This command returns statistics of a function. The input FID * value is used to indicate what function is being queried. This allows a * physical function driver to query virtual functions that are children of the * physical function. The HWRM shall return any unsupported counter with a value * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters. */ /* Input (24 bytes) */ struct hwrm_func_qstats_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function that is being queried. 0xFF... * (All Fs) if the query is for the requesting function. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (176 bytes) */ struct hwrm_func_qstats_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint64_t tx_ucast_pkts; /* Number of transmitted unicast packets on the function. */ uint64_t tx_mcast_pkts; /* Number of transmitted multicast packets on the function. */ uint64_t tx_bcast_pkts; /* Number of transmitted broadcast packets on the function. */ uint64_t tx_err_pkts; /* * Number of transmitted packets that were discarded due to * internal NIC resource problems. For transmit, this can only * happen if TMP is configured to allow dropping in HOL blocking * conditions, which is not a normal configuration. */ uint64_t tx_drop_pkts; /* * Number of dropped packets on transmit path on the function. * These are packets that have been marked for drop by the TE * CFA block or are packets that exceeded the transmit MTU limit * for the function. */ uint64_t tx_ucast_bytes; /* Number of transmitted bytes for unicast traffic on the function. */ uint64_t tx_mcast_bytes; /* * Number of transmitted bytes for multicast traffic on the * function. */ uint64_t tx_bcast_bytes; /* * Number of transmitted bytes for broadcast traffic on the * function. */ uint64_t rx_ucast_pkts; /* Number of received unicast packets on the function. */ uint64_t rx_mcast_pkts; /* Number of received multicast packets on the function. */ uint64_t rx_bcast_pkts; /* Number of received broadcast packets on the function. */ uint64_t rx_err_pkts; /* * Number of received packets that were discarded on the * function due to resource limitations. This can happen for 3 * reasons. # The BD used for the packet has a bad format. # * There were no BDs available in the ring for the packet. # * There were no BDs available on-chip for the packet. */ uint64_t rx_drop_pkts; /* * Number of dropped packets on received path on the function. * These are packets that have been marked for drop by the RE * CFA. */ uint64_t rx_ucast_bytes; /* Number of received bytes for unicast traffic on the function. */ uint64_t rx_mcast_bytes; /* Number of received bytes for multicast traffic on the function. */ uint64_t rx_bcast_bytes; /* Number of received bytes for broadcast traffic on the function. */ uint64_t rx_agg_pkts; /* Number of aggregated unicast packets on the function. */ uint64_t rx_agg_bytes; /* Number of aggregated unicast bytes on the function. */ uint64_t rx_agg_events; /* Number of aggregation events on the function. */ uint64_t rx_agg_aborts; /* Number of aborted aggregations on the function. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_clr_stats */ /* * Description: This command clears statistics of a function. The input FID * value is used to indicate what function's statistics is being cleared. This * allows a physical function driver to clear statistics of virtual functions * that are children of the physical function. */ /* Input (24 bytes) */ struct hwrm_func_clr_stats_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function. 0xFF... (All Fs) if the query is * for the requesting function. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_clr_stats_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_vf_vnic_ids_query */ /* Description: This command is used to query vf vnic ids. */ /* Input (32 bytes) */ struct hwrm_func_vf_vnic_ids_query_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t vf_id; /* * This value is used to identify a Virtual Function (VF). The * scope of VF ID is local within a PF. */ uint8_t unused_0; uint8_t unused_1; uint32_t max_vnic_id_cnt; /* Max number of vnic ids in vnic id table */ uint64_t vnic_id_tbl_addr; /* This is the address for VF VNIC ID table */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_vf_vnic_ids_query_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t vnic_id_cnt; /* * Actual number of vnic ids Each VNIC ID is written as a 32-bit * number. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_drv_rgtr */ /* * Description: This command is used by the function driver to register its * information with the HWRM. A function driver shall implement this command. A * function driver shall use this command during the driver initialization right * after the HWRM version discovery and default ring resources allocation. */ /* Input (80 bytes) */ struct hwrm_func_drv_rgtr_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * When this bit is '1', the function driver is requesting all * requests from its children VF drivers to be forwarded to * itself. This flag can only be set by the PF driver. If a VF * driver sets this flag, it should be ignored by the HWRM. */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1) /* * When this bit is '1', the function is requesting none of the * requests from its children VF drivers to be forwarded to * itself. This flag can only be set by the PF driver. If a VF * driver sets this flag, it should be ignored by the HWRM. */ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2) uint32_t enables; /* This bit must be '1' for the os_type field to be configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1) /* This bit must be '1' for the ver field to be configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2) /* This bit must be '1' for the timestamp field to be configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4) /* This bit must be '1' for the vf_req_fwd field to be configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD UINT32_C(0x8) /* * This bit must be '1' for the async_event_fwd field to be * configured. */ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD UINT32_C(0x10) uint16_t os_type; /* * This value indicates the type of OS. The values are based on * CIM_OperatingSystem.mof file as published by the DMTF. */ /* Unknown */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0) /* Other OS not listed below. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1) /* MSDOS OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe) /* Windows OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12) /* Solaris OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d) /* Linux OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24) /* FreeBSD OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a) /* VMware ESXi OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68) /* Microsoft Windows 8 64-bit OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73) /* Microsoft Windows Server 2012 R2 OS. */ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74) uint8_t ver_maj; /* This is the major version of the driver. */ uint8_t ver_min; /* This is the minor version of the driver. */ uint8_t ver_upd; /* This is the update version of the driver. */ uint8_t unused_0; uint16_t unused_1; uint32_t timestamp; /* * This is a 32-bit timestamp provided by the driver for keep * alive. The timestamp is in multiples of 1ms. */ uint32_t unused_2; uint32_t vf_req_fwd[8]; /* * This is a 256-bit bit mask provided by the PF driver for * letting the HWRM know what commands issued by the VF driver * to the HWRM should be forwarded to the PF driver. Nth bit * refers to the Nth req_type. Setting Nth bit to 1 indicates * that requests from the VF driver with req_type equal to N * shall be forwarded to the parent PF driver. This field is not * valid for the VF driver. */ uint32_t async_event_fwd[8]; /* * This is a 256-bit bit mask provided by the function driver * (PF or VF driver) to indicate the list of asynchronous event * completions to be forwarded. Nth bit refers to the Nth * event_id. Setting Nth bit to 1 by the function driver shall * result in the HWRM forwarding asynchronous event completion * with event_id equal to N. If all bits are set to 0 (value of * 0), then the HWRM shall not forward any asynchronous event * completion to this function driver. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_drv_rgtr_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_drv_unrgtr */ /* * Description: This command is used by the function driver to un register with * the HWRM. A function driver shall implement this command. A function driver * shall use this command during the driver unloading. */ /* Input (24 bytes) */ struct hwrm_func_drv_unrgtr_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * When this bit is '1', the function driver is notifying the * HWRM to prepare for the shutdown. */ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \ UINT32_C(0x1) uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_drv_unrgtr_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_buf_rgtr */ /* * Description: This command is used by the PF driver to register buffers used * in the PF-VF communication with the HWRM. The PF driver uses this command to * register buffers for each PF-VF channel. A parent PF may issue this command * per child VF. If VF ID is not valid, then this command is used to register * buffers for all children VFs of the PF. */ /* Input (128 bytes) */ struct hwrm_func_buf_rgtr_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the vf_id field to be configured. */ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) /* This bit must be '1' for the err_buf_addr field to be configured. */ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2) uint16_t vf_id; /* * This value is used to identify a Virtual Function (VF). The * scope of VF ID is local within a PF. */ uint16_t req_buf_num_pages; /* * This field represents the number of pages used for request * buffer(s). */ uint16_t req_buf_page_size; /* This field represents the page size used for request buffer(s). */ /* 16 bytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_16B UINT32_C(0x4) /* 4 Kbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4K UINT32_C(0xc) /* 8 Kbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_8K UINT32_C(0xd) /* 64 Kbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_64K UINT32_C(0x10) /* 2 Mbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_2M UINT32_C(0x15) /* 4 Mbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4M UINT32_C(0x16) /* 1 Gbytes */ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_1G UINT32_C(0x1e) uint16_t req_buf_len; /* The length of the request buffer per VF in bytes. */ uint16_t resp_buf_len; /* The length of the response buffer in bytes. */ uint8_t unused_0; uint8_t unused_1; uint64_t req_buf_page_addr[10]; /* This field represents the page address of req buffer. */ uint64_t error_buf_addr; /* * This field is used to receive the error reporting from the * chipset. Only applicable for PFs. */ uint64_t resp_buf_addr; /* This field is used to receive the response forwarded by the HWRM. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_buf_rgtr_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_func_buf_unrgtr */ /* * Description: This command is used by the PF driver to unregister buffers used * in the PF-VF communication with the HWRM. The PF driver uses this command to * unregister buffers for PF-VF communication. A parent PF may issue this * command to unregister buffers for communication between the PF and a specific * VF. If the VF ID is not valid, then this command is used to unregister * buffers used for communications with all children VFs of the PF. */ /* Input (24 bytes) */ struct hwrm_func_buf_unrgtr_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the vf_id field to be configured. */ #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1) uint16_t vf_id; /* * This value is used to identify a Virtual Function (VF). The * scope of VF ID is local within a PF. */ uint16_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_func_buf_unrgtr_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_port_phy_cfg */ /* * Description: This command configures the PHY device for the port. It allows * setting of the most generic settings for the PHY. The HWRM shall complete * this command as soon as PHY settings are configured. They may not be applied * when the command response is provided. A VF driver shall not be allowed to * configure PHY using this command. In a network partition mode, a PF driver * shall not be allowed to configure PHY using this command. */ /* Input (56 bytes) */ struct hwrm_port_phy_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * When this bit is set to '1', the PHY for the port shall be * reset. # If this bit is set to 1, then the HWRM shall reset * the PHY after applying PHY configuration changes specified in * this command. # In order to guarantee that PHY configuration * changes specified in this command take effect, the HWRM * client should set this flag to 1. # If this bit is not set to * 1, then the HWRM may reset the PHY depending on the current * PHY configuration and settings specified in this command. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1) /* deprecated bit. Do not use!!! */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED UINT32_C(0x2) /* * When this bit is set to '1', the link shall be forced to the * force_link_speed value. When this bit is set to '1', the HWRM * client should not enable any of the auto negotiation related * fields represented by auto_XXX fields in this command. When * this bit is set to '1' and the HWRM client has enabled a * auto_XXX field in this command, then the HWRM shall ignore * the enabled auto_XXX field. When this bit is set to zero, the * link shall be allowed to autoneg. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE UINT32_C(0x4) /* * When this bit is set to '1', the auto-negotiation process * shall be restarted on the link. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8) /* * When this bit is set to '1', Energy Efficient Ethernet (EEE) * is requested to be enabled on this link. If EEE is not * supported on this port, then this flag shall be ignored by * the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE UINT32_C(0x10) /* * When this bit is set to '1', Energy Efficient Ethernet (EEE) * is requested to be disabled on this link. If EEE is not * supported on this port, then this flag shall be ignored by * the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE UINT32_C(0x20) /* * When this bit is set to '1' and EEE is enabled on this link, * then TX LPI is requested to be enabled on the link. If EEE is * not supported on this port, then this flag shall be ignored * by the HWRM. If EEE is disabled on this port, then this flag * shall be ignored by the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE UINT32_C(0x40) /* * When this bit is set to '1' and EEE is enabled on this link, * then TX LPI is requested to be disabled on the link. If EEE * is not supported on this port, then this flag shall be * ignored by the HWRM. If EEE is disabled on this port, then * this flag shall be ignored by the HWRM. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE UINT32_C(0x80) /* * When set to 1, then the HWRM shall enable FEC * autonegotitation on this port if supported. When set to 0, * then this flag shall be ignored. If FEC autonegotiation is * not supported, then the HWRM shall ignore this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE UINT32_C(0x100) /* * When set to 1, then the HWRM shall disable FEC * autonegotiation on this port if supported. When set to 0, * then this flag shall be ignored. If FEC autonegotiation is * not supported, then the HWRM shall ignore this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \ UINT32_C(0x200) /* * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire * Code) on this port if supported. When set to 0, then this * flag shall be ignored. If FEC CLAUSE 74 is not supported, * then the HWRM shall ignore this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \ UINT32_C(0x400) /* * When set to 1, then the HWRM shall disable FEC CLAUSE 74 * (Fire Code) on this port if supported. When set to 0, then * this flag shall be ignored. If FEC CLAUSE 74 is not * supported, then the HWRM shall ignore this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \ UINT32_C(0x800) /* * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed * Solomon) on this port if supported. When set to 0, then this * flag shall be ignored. If FEC CLAUSE 91 is not supported, * then the HWRM shall ignore this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \ UINT32_C(0x1000) /* * When set to 1, then the HWRM shall disable FEC CLAUSE 91 * (Reed Solomon) on this port if supported. When set to 0, then * this flag shall be ignored. If FEC CLAUSE 91 is not * supported, then the HWRM shall ignore this flag. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \ UINT32_C(0x2000) /* * When this bit is set to '1', the link shall be forced to be * taken down. # When this bit is set to '1", all other command * input settings related to the link speed shall be ignored. * Once the link state is forced down, it can be explicitly * cleared from that state by setting this flag to '0'. # If * this flag is set to '0', then the link shall be cleared from * forced down state if the link is in forced down state. There * may be conditions (e.g. out-of-band or sideband configuration * changes for the link) outside the scope of the HWRM * implementation that may clear forced down link state. */ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN UINT32_C(0x4000) uint32_t enables; /* This bit must be '1' for the auto_mode field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1) /* This bit must be '1' for the auto_duplex field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX UINT32_C(0x2) /* This bit must be '1' for the auto_pause field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE UINT32_C(0x4) /* * This bit must be '1' for the auto_link_speed field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED UINT32_C(0x8) /* * This bit must be '1' for the auto_link_speed_mask field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \ UINT32_C(0x10) /* This bit must be '1' for the wirespeed field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIOUTPUTEED UINT32_C(0x20) /* This bit must be '1' for the lpbk field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK UINT32_C(0x40) /* This bit must be '1' for the preemphasis field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS UINT32_C(0x80) /* This bit must be '1' for the force_pause field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE UINT32_C(0x100) /* * This bit must be '1' for the eee_link_speed_mask field to be * configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \ UINT32_C(0x200) /* This bit must be '1' for the tx_lpi_timer field to be configured. */ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER UINT32_C(0x400) uint16_t port_id; /* Port ID of port that is to be configured. */ uint16_t force_link_speed; /* * This is the speed that will be used if the force bit is '1'. * If unsupported speed is selected, an error will be generated. */ /* 100Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff) uint8_t auto_mode; /* * This value is used to identify what autoneg mode is used when * the link speed is not being forced. */ /* * Disable autoneg or autoneg disabled. No * speeds are selected. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0) /* Select all possible speeds for autoneg mode. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) /* * Select only the auto_link_speed speed for * autoneg mode. This mode has been DEPRECATED. * An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) /* * Select the auto_link_speed or any speed below * that speed for autoneg. This mode has been * DEPRECATED. An HWRM client should not use * this mode. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) /* * Select the speeds based on the corresponding * link speed mask value that is provided. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) uint8_t auto_duplex; /* * This is the duplex setting that will be used if the * autoneg_mode is "one_speed" or "one_or_below". */ /* Half Duplex will be requested. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0) /* Full duplex will be requested. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1) /* Both Half and Full dupex will be requested. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2) uint8_t auto_pause; /* * This value is used to configure the pause that will be used * for autonegotiation. Add text on the usage of auto_pause and * force_pause. */ /* * When this bit is '1', Generation of tx pause messages has * been requested. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages has been * requested. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX UINT32_C(0x2) /* * When set to 1, the advertisement of pause is enabled. # When * the auto_mode is not set to none and this flag is set to 1, * then the auto_pause bits on this port are being advertised * and autoneg pause results are being interpreted. # When the * auto_mode is not set to none and this flag is set to 0, the * pause is forced as indicated in force_pause, and also * advertised as auto_pause bits, but the autoneg results are * not interpreted since the pause configuration is being * forced. # When the auto_mode is set to none and this flag is * set to 1, auto_pause bits should be ignored and should be set * to 0. */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4) uint8_t unused_0; uint16_t auto_link_speed; /* * This is the speed that will be used if the autoneg_mode is * "one_speed" or "one_or_below". If an unsupported speed is * selected, an error will be generated. */ /* 100Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff) uint16_t auto_link_speed_mask; /* * This is a mask of link speeds that will be used if * autoneg_mode is "mask". If unsupported speed is enabled an * error will be generated. */ /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB \ UINT32_C(0x10) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \ UINT32_C(0x2000) uint8_t wirespeed; /* This value controls the wirespeed feature. */ /* Wirespeed feature is disabled. */ #define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_OFF UINT32_C(0x0) /* Wirespeed feature is enabled. */ #define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_ON UINT32_C(0x1) uint8_t lpbk; /* This value controls the loopback setting for the PHY. */ /* No loopback is selected. Normal operation. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0) /* * The HW will be configured with local loopback * such that host data is sent back to the host * without modification. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1) /* * The HW will be configured with remote * loopback such that port logic will send * packets back out the transmitter that are * received. */ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2) uint8_t force_pause; /* * This value is used to configure the pause that will be used * for force mode. */ /* * When this bit is '1', Generation of tx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2) uint8_t unused_1; uint32_t preemphasis; /* * This value controls the pre-emphasis to be used for the link. * Driver should not set this value (use enable.preemphasis = 0) * unless driver is sure of setting. Normally HWRM FW will * determine proper pre-emphasis. */ uint16_t eee_link_speed_mask; /* * Setting for link speed mask that is used to advertise speeds * during autonegotiation when EEE is enabled. This field is * valid only when EEE is enabled. The speeds specified in this * field shall be a subset of speeds specified in * auto_link_speed_mask. If EEE is enabled,then at least one * speed shall be provided in this mask. */ /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2) /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8) /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10) /* Reserved */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40) uint8_t unused_2; uint8_t unused_3; uint32_t tx_lpi_timer; uint32_t unused_4; /* * Reuested setting of TX LPI timer in microseconds. This field * is valid only when EEE is enabled and TX LPI is enabled. */ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff) #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0 } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_port_phy_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_port_phy_qcfg */ /* Description: This command queries the PHY configuration for the port. */ /* Input (24 bytes) */ struct hwrm_port_phy_qcfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t port_id; /* Port ID of port that is to be queried. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (96 bytes) */ struct hwrm_port_phy_qcfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint8_t link; /* This value indicates the current link status. */ /* There is no link or cable detected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0) /* There is no link, but a cable has been detected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1) /* There is a link. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2) uint8_t unused_0; uint16_t link_speed; /* This value indicates the current link speed of the connection. */ /* 100Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff) uint8_t duplex_cfg; /* This value is indicates the duplex of the current connection. */ /* Half Duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_HALF UINT32_C(0x0) /* Full duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_CFG_FULL UINT32_C(0x1) uint8_t pause; /* * This value is used to indicate the current pause * configuration. When autoneg is enabled, this value represents * the autoneg results of pause configuration. */ /* * When this bit is '1', Generation of tx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2) uint16_t support_speeds; /* * The supported speeds for the port. This is a bit mask. For * each speed that is supported, the corrresponding bit will be * set to '1'. */ /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB UINT32_C(0x10) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000) uint16_t force_link_speed; /* * Current setting of forced link speed. When the link speed is * not being forced, this value shall be set to 0. */ /* 100Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff) uint8_t auto_mode; /* Current setting of auto negotiation mode. */ /* * Disable autoneg or autoneg disabled. No * speeds are selected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0) /* Select all possible speeds for autoneg mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1) /* * Select only the auto_link_speed speed for * autoneg mode. This mode has been DEPRECATED. * An HWRM client should not use this mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2) /* * Select the auto_link_speed or any speed below * that speed for autoneg. This mode has been * DEPRECATED. An HWRM client should not use * this mode. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3) /* * Select the speeds based on the corresponding * link speed mask value that is provided. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4) uint8_t auto_pause; /* * Current setting of pause autonegotiation. Move autoneg_pause * flag here. */ /* * When this bit is '1', Generation of tx pause messages has * been requested. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages has been * requested. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX UINT32_C(0x2) /* * When set to 1, the advertisement of pause is enabled. # When * the auto_mode is not set to none and this flag is set to 1, * then the auto_pause bits on this port are being advertised * and autoneg pause results are being interpreted. # When the * auto_mode is not set to none and this flag is set to 0, the * pause is forced as indicated in force_pause, and also * advertised as auto_pause bits, but the autoneg results are * not interpreted since the pause configuration is being * forced. # When the auto_mode is set to none and this flag is * set to 1, auto_pause bits should be ignored and should be set * to 0. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4) uint16_t auto_link_speed; /* * Current setting for auto_link_speed. This field is only valid * when auto_mode is set to "one_speed" or "one_or_below". */ /* 100Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1) /* 1Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64) /* 20Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8) /* 10Mb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff) uint16_t auto_link_speed_mask; /* * Current setting for auto_link_speed_mask that is used to * advertise speeds during autonegotiation. This field is only * valid when auto_mode is set to "mask". The speeds specified * in this field shall be a subset of supported speeds on this * port. */ /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \ UINT32_C(0x10) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \ UINT32_C(0x2000) uint8_t wirespeed; /* Current setting for wirespeed. */ /* Wirespeed feature is disabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_OFF UINT32_C(0x0) /* Wirespeed feature is enabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_ON UINT32_C(0x1) uint8_t lpbk; /* Current setting for loopback. */ /* No loopback is selected. Normal operation. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0) /* * The HW will be configured with local loopback * such that host data is sent back to the host * without modification. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1) /* * The HW will be configured with remote * loopback such that port logic will send * packets back out the transmitter that are * received. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2) uint8_t force_pause; /* * Current setting of forced pause. When the pause configuration * is not being forced, then this value shall be set to 0. */ /* * When this bit is '1', Generation of tx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2) uint8_t module_status; /* * This value indicates the current status of the optics module * on this port. */ /* Module is inserted and accepted */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE UINT32_C(0x0) /* Module is rejected and transmit side Laser is disabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX UINT32_C(0x1) /* Module mismatch warning. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG UINT32_C(0x2) /* Module is rejected and powered down. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN UINT32_C(0x3) /* Module is not inserted. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \ UINT32_C(0x4) /* Module status is not applicable. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \ UINT32_C(0xff) uint32_t preemphasis; /* Current setting for preemphasis. */ uint8_t phy_maj; /* This field represents the major version of the PHY. */ uint8_t phy_min; /* This field represents the minor version of the PHY. */ uint8_t phy_bld; /* This field represents the build version of the PHY. */ uint8_t phy_type; /* This value represents a PHY type. */ /* Unknown */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN UINT32_C(0x0) /* BASE-CR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR UINT32_C(0x1) /* BASE-KR4 (Deprecated) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 UINT32_C(0x2) /* BASE-LR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR UINT32_C(0x3) /* BASE-SR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR UINT32_C(0x4) /* BASE-KR2 (Deprecated) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 UINT32_C(0x5) /* BASE-KX */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX UINT32_C(0x6) /* BASE-KR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR UINT32_C(0x7) /* BASE-T */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET UINT32_C(0x8) /* EEE capable BASE-T */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE UINT32_C(0x9) /* SGMII connected external PHY */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY UINT32_C(0xa) /* 25G_BASECR_CA_L */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L UINT32_C(0xb) /* 25G_BASECR_CA_S */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S UINT32_C(0xc) /* 25G_BASECR_CA_N */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N UINT32_C(0xd) /* 25G_BASESR */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR UINT32_C(0xe) /* 100G_BASECR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 UINT32_C(0xf) /* 100G_BASESR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 UINT32_C(0x10) /* 100G_BASELR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 UINT32_C(0x11) /* 100G_BASEER4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 UINT32_C(0x12) /* 100G_BASESR10 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 UINT32_C(0x13) /* 40G_BASECR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 UINT32_C(0x14) /* 40G_BASESR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 UINT32_C(0x15) /* 40G_BASELR4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 UINT32_C(0x16) /* 40G_BASEER4 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 UINT32_C(0x17) /* 40G_ACTIVE_CABLE */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \ UINT32_C(0x18) #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASET UINT32_C(0x19) /* 1G_baseSX */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASESX UINT32_C(0x1a) /* 1G_baseCX */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_1G_BASECX UINT32_C(0x1b) uint8_t media_type; /* This value represents a media type. */ /* Unknown */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0) /* Twisted Pair */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1) /* Direct Attached Copper */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2) /* Fiber */ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3) uint8_t xcvr_pkg_type; /* This value represents a transceiver type. */ /* PHY and MAC are in the same package */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \ UINT32_C(0x1) /* PHY and MAC are in different packages */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \ UINT32_C(0x2) uint8_t eee_config_phy_addr; /* * This field represents flags related to EEE configuration. * These EEE configuration flags are valid only when the * auto_mode is not set to none (in other words autonegotiation * is enabled). */ /* This field represents PHY address. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK UINT32_C(0x1f) #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0 /* * When set to 1, Energy Efficient Ethernet (EEE) mode is * enabled. Speeds for autoneg with EEE mode enabled are based * on eee_link_speed_mask. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED UINT32_C(0x20) /* * This flag is valid only when eee_enabled is set to 1. # If * eee_enabled is set to 0, then EEE mode is disabled and this * flag shall be ignored. # If eee_enabled is set to 1 and this * flag is set to 1, then Energy Efficient Ethernet (EEE) mode * is enabled and in use. # If eee_enabled is set to 1 and this * flag is set to 0, then Energy Efficient Ethernet (EEE) mode * is enabled but is currently not in use. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE UINT32_C(0x40) /* * This flag is valid only when eee_enabled is set to 1. # If * eee_enabled is set to 0, then EEE mode is disabled and this * flag shall be ignored. # If eee_enabled is set to 1 and this * flag is set to 1, then Energy Efficient Ethernet (EEE) mode * is enabled and TX LPI is enabled. # If eee_enabled is set to * 1 and this flag is set to 0, then Energy Efficient Ethernet * (EEE) mode is enabled but TX LPI is disabled. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI UINT32_C(0x80) /* * This field represents flags related to EEE configuration. * These EEE configuration flags are valid only when the * auto_mode is not set to none (in other words autonegotiation * is enabled). */ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK UINT32_C(0xe0) #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5 uint8_t parallel_detect; /* Reserved field, set to 0 */ /* * When set to 1, the parallel detection is used to determine * the speed of the link partner. Parallel detection is used * when a autonegotiation capable device is connected to a link * parter that is not capable of autonegotiation. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1) /* Reserved field, set to 0 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK UINT32_C(0xfe) #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT 1 uint16_t link_partner_adv_speeds; /* * The advertised speeds for the port by the link partner. Each * advertised speed will be set to '1'. */ /* 100Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \ UINT32_C(0x2) /* 1Gb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \ UINT32_C(0x8) /* 2Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \ UINT32_C(0x10) /* 2.5Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \ UINT32_C(0x40) /* 20Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \ UINT32_C(0x80) /* 25Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \ UINT32_C(0x100) /* 40Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \ UINT32_C(0x200) /* 50Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \ UINT32_C(0x400) /* 100Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \ UINT32_C(0x800) /* 10Mb link speed (Half-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \ UINT32_C(0x1000) /* 10Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \ UINT32_C(0x2000) uint8_t link_partner_adv_auto_mode; /* * The advertised autoneg for the port by the link partner. This * field is deprecated and should be set to 0. */ /* * Disable autoneg or autoneg disabled. No * speeds are selected. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \ UINT32_C(0x0) /* Select all possible speeds for autoneg mode. */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \ UINT32_C(0x1) /* * Select only the auto_link_speed speed for * autoneg mode. This mode has been DEPRECATED. * An HWRM client should not use this mode. */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \ UINT32_C(0x2) /* * Select the auto_link_speed or any speed below * that speed for autoneg. This mode has been * DEPRECATED. An HWRM client should not use * this mode. */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \ UINT32_C(0x3) /* * Select the speeds based on the corresponding * link speed mask value that is provided. */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \ UINT32_C(0x4) uint8_t link_partner_adv_pause; /* The advertised pause settings on the port by the link partner. */ /* * When this bit is '1', Generation of tx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \ UINT32_C(0x1) /* * When this bit is '1', Reception of rx pause messages is * supported. Disabled otherwise. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \ UINT32_C(0x2) uint16_t adv_eee_link_speed_mask; /* * Current setting for link speed mask that is used to advertise * speeds during autonegotiation when EEE is enabled. This field * is valid only when eee_enabled flags is set to 1. The speeds * specified in this field shall be a subset of speeds specified * in auto_link_speed_mask. */ /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ UINT32_C(0x10) /* Reserved */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ UINT32_C(0x20) /* 10Gb link speed */ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) uint16_t link_partner_adv_eee_link_speed_mask; /* * Current setting for link speed mask that is advertised by the * link partner when EEE is enabled. This field is valid only * when eee_enabled flags is set to 1. */ /* Reserved */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \ UINT32_C(0x1) /* 100Mb link speed (Full-duplex) */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \ UINT32_C(0x2) /* Reserved */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \ UINT32_C(0x4) /* 1Gb link speed (Full-duplex) */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \ UINT32_C(0x8) /* Reserved */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \ UINT32_C(0x10) /* Reserved */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \ UINT32_C(0x20) /* 10Gb link speed */ #define \ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \ UINT32_C(0x40) uint32_t xcvr_identifier_type_tx_lpi_timer; /* This value represents transceiver identifier type. */ /* * Current setting of TX LPI timer in microseconds. This field * is valid only when_eee_enabled flag is set to 1 and * tx_lpi_enabled is set to 1. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff) #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0 /* This value represents transceiver identifier type. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \ UINT32_C(0xff000000) #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24 /* Unknown */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \ (UINT32_C(0x0) << 24) /* SFP/SFP+/SFP28 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \ (UINT32_C(0x3) << 24) /* QSFP */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \ (UINT32_C(0xc) << 24) /* QSFP+ */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \ (UINT32_C(0xd) << 24) /* QSFP28 */ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \ (UINT32_C(0x11) << 24) uint16_t fec_cfg; /* * This value represents the current configuration of Forward * Error Correction (FEC) on the port. */ /* * When set to 1, then FEC is not supported on this port. If * this flag is set to 1, then all other FEC configuration flags * shall be ignored. When set to 0, then FEC is supported as * indicated by other configuration flags. If no cable is * attached and the HWRM does not yet know the FEC capability, * then the HWRM shall set this flag to 1 when reporting FEC * capability. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \ UINT32_C(0x1) /* * When set to 1, then FEC autonegotiation is supported on this * port. When set to 0, then FEC autonegotiation is not * supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \ UINT32_C(0x2) /* * When set to 1, then FEC autonegotiation is enabled on this * port. When set to 0, then FEC autonegotiation is disabled if * supported. This flag should be ignored if FEC autonegotiation * is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \ UINT32_C(0x4) /* * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is * not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \ UINT32_C(0x8) /* * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is * disabled if supported. This flag should be ignored if FEC * CLAUSE 74 is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \ UINT32_C(0x10) /* * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported * on this port. When set to 0, then FEC CLAUSE 91 (Reed * Solomon) is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \ UINT32_C(0x20) /* * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled * on this port. When set to 0, then FEC CLAUSE 91 (Reed * Solomon) is disabled if supported. This flag should be * ignored if FEC CLAUSE 91 is not supported on this port. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \ UINT32_C(0x40) uint8_t duplex_state; /* * This value is indicates the duplex of the current connection * state. */ /* Half Duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_HALF UINT32_C(0x0) /* Full duplex connection. */ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_STATE_FULL UINT32_C(0x1) uint8_t unused_1; char phy_vendor_name[16]; /* * Up to 16 bytes of null padded ASCII string representing PHY * vendor. If the string is set to null, then the vendor name is * not available. */ char phy_vendor_partnumber[16]; /* * Up to 16 bytes of null padded ASCII string that identifies * vendor specific part number of the PHY. If the string is set * to null, then the vendor specific part number is not * available. */ uint32_t unused_2; uint8_t unused_3; uint8_t unused_4; uint8_t unused_5; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_port_qstats */ /* Description: This function returns per port Ethernet statistics. */ /* Input (40 bytes) */ struct hwrm_port_qstats_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t port_id; /* Port ID of port that is being queried. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2[3]; uint8_t unused_3; uint64_t tx_stat_host_addr; /* This is the host address where Tx port statistics will be stored */ uint64_t rx_stat_host_addr; /* This is the host address where Rx port statistics will be stored */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_port_qstats_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t tx_stat_size; /* The size of TX port statistics block in bytes. */ uint16_t rx_stat_size; /* The size of RX port statistics block in bytes. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_port_clr_stats */ /* * Description: This function clears per port statistics. The HWRM shall not * allow a VF driver to clear port statistics. The HWRM shall not allow a PF * driver to clear port statistics in a partitioning mode. The HWRM may allow a * PF driver to clear port statistics in the non-partitioning mode. */ /* Input (24 bytes) */ struct hwrm_port_clr_stats_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t port_id; /* Port ID of port that is being queried. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_port_clr_stats_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_port_led_cfg */ /* * Description: This function is used to configure LEDs on a given port. Each * port has individual set of LEDs associated with it. These LEDs are used for * speed/link configuration as well as activity indicator configuration. Up to * three LEDs can be configured, one for activity and two for speeds. */ /* Input (64 bytes) */ struct hwrm_port_led_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the led0_id field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID UINT32_C(0x1) /* This bit must be '1' for the led0_state field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE UINT32_C(0x2) /* This bit must be '1' for the led0_color field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR UINT32_C(0x4) /* * This bit must be '1' for the led0_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON UINT32_C(0x8) /* * This bit must be '1' for the led0_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF UINT32_C(0x10) /* * This bit must be '1' for the led0_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID UINT32_C(0x20) /* This bit must be '1' for the led1_id field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID UINT32_C(0x40) /* This bit must be '1' for the led1_state field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE UINT32_C(0x80) /* This bit must be '1' for the led1_color field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR UINT32_C(0x100) /* * This bit must be '1' for the led1_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON UINT32_C(0x200) /* * This bit must be '1' for the led1_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF UINT32_C(0x400) /* * This bit must be '1' for the led1_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID UINT32_C(0x800) /* This bit must be '1' for the led2_id field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID UINT32_C(0x1000) /* This bit must be '1' for the led2_state field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE UINT32_C(0x2000) /* This bit must be '1' for the led2_color field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR UINT32_C(0x4000) /* * This bit must be '1' for the led2_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON UINT32_C(0x8000) /* * This bit must be '1' for the led2_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF UINT32_C(0x10000) /* * This bit must be '1' for the led2_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID UINT32_C(0x20000) /* This bit must be '1' for the led3_id field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID UINT32_C(0x40000) /* This bit must be '1' for the led3_state field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE UINT32_C(0x80000) /* This bit must be '1' for the led3_color field to be configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR UINT32_C(0x100000) /* * This bit must be '1' for the led3_blink_on field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON UINT32_C(0x200000) /* * This bit must be '1' for the led3_blink_off field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \ UINT32_C(0x400000) /* * This bit must be '1' for the led3_group_id field to be * configured. */ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID UINT32_C(0x800000) uint16_t port_id; /* Port ID of port whose LEDs are configured. */ uint8_t num_leds; /* * The number of LEDs that are being configured. Up to 4 LEDs * can be configured with this command. */ uint8_t rsvd; /* Reserved field. */ uint8_t led0_id; /* An identifier for the LED #0. */ uint8_t led0_state; /* The requested state of the LED #0. */ /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4) uint8_t led0_color; /* The requested color of LED #0. */ /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_0; uint16_t led0_blink_on; /* * If the LED #0 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led0_blink_off; /* * If the LED #0 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led0_group_id; /* * An identifier for the group of LEDs that LED #0 belongs to. * If set to 0, then the LED #0 shall not be grouped and shall * be treated as an individual resource. For all other non-zero * values of this field, LED #0 shall be grouped together with * the LEDs with the same group ID value. */ uint8_t rsvd0; /* Reserved field. */ uint8_t led1_id; /* An identifier for the LED #1. */ uint8_t led1_state; /* The requested state of the LED #1. */ /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4) uint8_t led1_color; /* The requested color of LED #1. */ /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_1; uint16_t led1_blink_on; /* * If the LED #1 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led1_blink_off; /* * If the LED #1 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led1_group_id; /* * An identifier for the group of LEDs that LED #1 belongs to. * If set to 0, then the LED #1 shall not be grouped and shall * be treated as an individual resource. For all other non-zero * values of this field, LED #1 shall be grouped together with * the LEDs with the same group ID value. */ uint8_t rsvd1; /* Reserved field. */ uint8_t led2_id; /* An identifier for the LED #2. */ uint8_t led2_state; /* The requested state of the LED #2. */ /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4) uint8_t led2_color; /* The requested color of LED #2. */ /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_2; uint16_t led2_blink_on; /* * If the LED #2 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led2_blink_off; /* * If the LED #2 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led2_group_id; /* * An identifier for the group of LEDs that LED #2 belongs to. * If set to 0, then the LED #2 shall not be grouped and shall * be treated as an individual resource. For all other non-zero * values of this field, LED #2 shall be grouped together with * the LEDs with the same group ID value. */ uint8_t rsvd2; /* Reserved field. */ uint8_t led3_id; /* An identifier for the LED #3. */ uint8_t led3_state; /* The requested state of the LED #3. */ /* Default state of the LED */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4) uint8_t led3_color; /* The requested color of LED #3. */ /* Default */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_3; uint16_t led3_blink_on; /* * If the LED #3 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led3_blink_off; /* * If the LED #3 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led3_group_id; /* * An identifier for the group of LEDs that LED #3 belongs to. * If set to 0, then the LED #3 shall not be grouped and shall * be treated as an individual resource. For all other non-zero * values of this field, LED #3 shall be grouped together with * the LEDs with the same group ID value. */ uint8_t rsvd3; /* Reserved field. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_port_led_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_port_led_qcfg */ /* * Description: This function is used to query configuration of LEDs on a given * port. Each port has individual set of LEDs associated with it. These LEDs are * used for speed/link configuration as well as activity indicator * configuration. Up to three LEDs can be configured, one for activity and two * for speeds. */ /* Input (24 bytes) */ struct hwrm_port_led_qcfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t port_id; /* Port ID of port whose LED configuration is being queried. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (56 bytes) */ struct hwrm_port_led_qcfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint8_t num_leds; /* * The number of LEDs that are configured on this port. Up to 4 * LEDs can be returned in the response. */ uint8_t led0_id; /* An identifier for the LED #0. */ uint8_t led0_type; /* The type of LED #0. */ /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) uint8_t led0_state; /* The current state of the LED #0. */ /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4) uint8_t led0_color; /* The color of LED #0. */ /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_0; uint16_t led0_blink_on; /* * If the LED #0 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led0_blink_off; /* * If the LED #0 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led0_group_id; /* * An identifier for the group of LEDs that LED #0 belongs to. * If set to 0, then the LED #0 is not grouped. For all other * non-zero values of this field, LED #0 is grouped together * with the LEDs with the same group ID value. */ uint8_t led1_id; /* An identifier for the LED #1. */ uint8_t led1_type; /* The type of LED #1. */ /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) uint8_t led1_state; /* The current state of the LED #1. */ /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4) uint8_t led1_color; /* The color of LED #1. */ /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_1; uint16_t led1_blink_on; /* * If the LED #1 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led1_blink_off; /* * If the LED #1 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led1_group_id; /* * An identifier for the group of LEDs that LED #1 belongs to. * If set to 0, then the LED #1 is not grouped. For all other * non-zero values of this field, LED #1 is grouped together * with the LEDs with the same group ID value. */ uint8_t led2_id; /* An identifier for the LED #2. */ uint8_t led2_type; /* The type of LED #2. */ /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) uint8_t led2_state; /* The current state of the LED #2. */ /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4) uint8_t led2_color; /* The color of LED #2. */ /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_2; uint16_t led2_blink_on; /* * If the LED #2 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led2_blink_off; /* * If the LED #2 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led2_group_id; /* * An identifier for the group of LEDs that LED #2 belongs to. * If set to 0, then the LED #2 is not grouped. For all other * non-zero values of this field, LED #2 is grouped together * with the LEDs with the same group ID value. */ uint8_t led3_id; /* An identifier for the LED #3. */ uint8_t led3_type; /* The type of LED #3. */ /* Speed LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) uint8_t led3_state; /* The current state of the LED #3. */ /* Default state of the LED */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0) /* Off */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1) /* On */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2) /* Blink */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3) /* Blink Alternately */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4) uint8_t led3_color; /* The color of LED #3. */ /* Default */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) /* Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1) /* Green */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2) /* Green or Amber */ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) uint8_t unused_3; uint16_t led3_blink_on; /* * If the LED #3 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED on * between cycles. */ uint16_t led3_blink_off; /* * If the LED #3 state is "blink" or "blinkalt", then this field * represents the requested time in milliseconds to keep LED off * between cycles. */ uint8_t led3_group_id; /* * An identifier for the group of LEDs that LED #3 belongs to. * If set to 0, then the LED #3 is not grouped. For all other * non-zero values of this field, LED #3 is grouped together * with the LEDs with the same group ID value. */ uint8_t unused_4; uint16_t unused_5; uint8_t unused_6; uint8_t unused_7; uint8_t unused_8; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_port_led_qcaps */ /* * Description: This function is used to query capabilities of LEDs on a given * port. Each port has individual set of LEDs associated with it. These LEDs are * used for speed/link configuration as well as activity indicator * configuration. */ /* Input (24 bytes) */ struct hwrm_port_led_qcaps_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t port_id; /* Port ID of port whose LED configuration is being queried. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (48 bytes) */ struct hwrm_port_led_qcaps_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint8_t num_leds; /* * The number of LEDs that are configured on this port. Up to 4 * LEDs can be returned in the response. */ uint8_t unused_0[3]; /* Reserved for future use. */ uint8_t led0_id; /* An identifier for the LED #0. */ uint8_t led0_type; /* The type of LED #0. */ /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) uint8_t led0_group_id; /* * An identifier for the group of LEDs that LED #0 belongs to. * If set to 0, then the LED #0 cannot be grouped. For all other * non-zero values of this field, LED #0 is grouped together * with the LEDs with the same group ID value. */ uint8_t unused_1; uint16_t led0_state_caps; /* The states supported by LED #0. */ /* * If set to 1, this LED is enabled. If set to 0, this LED is * disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. If set to 0, * off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. If set to 0, * on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. If set to * 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. If set * to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) uint16_t led0_color_caps; /* The colors supported by LED #0. */ /* reserved */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. If set to * 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. If set to * 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) uint8_t led1_id; /* An identifier for the LED #1. */ uint8_t led1_type; /* The type of LED #1. */ /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) uint8_t led1_group_id; /* * An identifier for the group of LEDs that LED #1 belongs to. * If set to 0, then the LED #0 cannot be grouped. For all other * non-zero values of this field, LED #0 is grouped together * with the LEDs with the same group ID value. */ uint8_t unused_2; uint16_t led1_state_caps; /* The states supported by LED #1. */ /* * If set to 1, this LED is enabled. If set to 0, this LED is * disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. If set to 0, * off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. If set to 0, * on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. If set to * 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. If set * to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) uint16_t led1_color_caps; /* The colors supported by LED #1. */ /* reserved */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. If set to * 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. If set to * 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) uint8_t led2_id; /* An identifier for the LED #2. */ uint8_t led2_type; /* The type of LED #2. */ /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) uint8_t led2_group_id; /* * An identifier for the group of LEDs that LED #0 belongs to. * If set to 0, then the LED #0 cannot be grouped. For all other * non-zero values of this field, LED #0 is grouped together * with the LEDs with the same group ID value. */ uint8_t unused_3; uint16_t led2_state_caps; /* The states supported by LED #2. */ /* * If set to 1, this LED is enabled. If set to 0, this LED is * disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. If set to 0, * off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. If set to 0, * on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. If set to * 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. If set * to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) uint16_t led2_color_caps; /* The colors supported by LED #2. */ /* reserved */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. If set to * 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. If set to * 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) uint8_t led3_id; /* An identifier for the LED #3. */ uint8_t led3_type; /* The type of LED #3. */ /* Speed LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) /* Activity LED */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) /* Invalid */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) uint8_t led3_group_id; /* * An identifier for the group of LEDs that LED #3 belongs to. * If set to 0, then the LED #0 cannot be grouped. For all other * non-zero values of this field, LED #0 is grouped together * with the LEDs with the same group ID value. */ uint8_t unused_4; uint16_t led3_state_caps; /* The states supported by LED #3. */ /* * If set to 1, this LED is enabled. If set to 0, this LED is * disabled. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED UINT32_C(0x1) /* * If set to 1, off state is supported on this LED. If set to 0, * off state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, on state is supported on this LED. If set to 0, * on state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \ UINT32_C(0x4) /* * If set to 1, blink state is supported on this LED. If set to * 0, blink state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \ UINT32_C(0x8) /* * If set to 1, blink_alt state is supported on this LED. If set * to 0, blink_alt state is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \ UINT32_C(0x10) uint16_t led3_color_caps; /* The colors supported by LED #3. */ /* reserved */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD UINT32_C(0x1) /* * If set to 1, Amber color is supported on this LED. If set to * 0, Amber color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \ UINT32_C(0x2) /* * If set to 1, Green color is supported on this LED. If set to * 0, Green color is not supported on this LED. */ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \ UINT32_C(0x4) uint8_t unused_5; uint8_t unused_6; uint8_t unused_7; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_queue_qportcfg */ /* * Description: This function is called by a driver to query queue configuration * of a port. # The HWRM shall at least advertise one queue with lossy service * profile. # The driver shall use this command to query queue ids before * configuring or using any queues. # If a service profile is not set for a * queue, then the driver shall not use that queue without configuring a service * profile for it. # If the driver is not allowed to configure service profiles, * then the driver shall only use queues for which service profiles are pre- * configured. */ /* Input (24 bytes) */ struct hwrm_queue_qportcfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. This * enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \ QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX uint16_t port_id; /* * Port ID of port for which the queue configuration is being * queried. This field is only required when sent by IPC. */ uint16_t unused_0; } __attribute__((packed)); /* Output (32 bytes) */ struct hwrm_queue_qportcfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint8_t max_configurable_queues; /* * The maximum number of queues that can be configured on this * port. Valid values range from 1 through 8. */ uint8_t max_configurable_lossless_queues; /* * The maximum number of lossless queues that can be configured * on this port. Valid values range from 0 through 8. */ uint8_t queue_cfg_allowed; /* * Bitmask indicating which queues can be configured by the * hwrm_queue_cfg command. Each bit represents a specific queue * where bit 0 represents queue 0 and bit 7 represents queue 7. * # A value of 0 indicates that the queue is not configurable * by the hwrm_queue_cfg command. # A value of 1 indicates that * the queue is configurable. # A hwrm_queue_cfg command shall * return error when trying to configure a queue not * configurable. */ uint8_t queue_cfg_info; /* Information about queue configuration. */ /* * If this flag is set to '1', then the queues are configured * asymmetrically on TX and RX sides. If this flag is set to * '0', then the queues are configured symmetrically on TX and * RX sides. For symmetric configuration, the queue * configuration including queue ids and service profiles on the * TX side is the same as the corresponding queue configuration * on the RX side. */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG UINT32_C(0x1) uint8_t queue_pfcenable_cfg_allowed; /* * Bitmask indicating which queues can be configured by the * hwrm_queue_pfcenable_cfg command. Each bit represents a * specific priority where bit 0 represents priority 0 and bit 7 * represents priority 7. # A value of 0 indicates that the * priority is not configurable by the hwrm_queue_pfcenable_cfg * command. # A value of 1 indicates that the priority is * configurable. # A hwrm_queue_pfcenable_cfg command shall * return error when trying to configure a priority that is not * configurable. */ uint8_t queue_pri2cos_cfg_allowed; /* * Bitmask indicating which queues can be configured by the * hwrm_queue_pri2cos_cfg command. Each bit represents a * specific queue where bit 0 represents queue 0 and bit 7 * represents queue 7. # A value of 0 indicates that the queue * is not configurable by the hwrm_queue_pri2cos_cfg command. # * A value of 1 indicates that the queue is configurable. # A * hwrm_queue_pri2cos_cfg command shall return error when trying * to configure a queue that is not configurable. */ uint8_t queue_cos2bw_cfg_allowed; /* * Bitmask indicating which queues can be configured by the * hwrm_queue_pri2cos_cfg command. Each bit represents a * specific queue where bit 0 represents queue 0 and bit 7 * represents queue 7. # A value of 0 indicates that the queue * is not configurable by the hwrm_queue_pri2cos_cfg command. # * A value of 1 indicates that the queue is configurable. # A * hwrm_queue_pri2cos_cfg command shall return error when trying * to configure a queue not configurable. */ uint8_t queue_id0; /* * ID of CoS Queue 0. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id0_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t queue_id1; /* * ID of CoS Queue 1. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id1_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t queue_id2; /* * ID of CoS Queue 2. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id2_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t queue_id3; /* * ID of CoS Queue 3. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id3_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t queue_id4; /* * ID of CoS Queue 4. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id4_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t queue_id5; /* * ID of CoS Queue 5. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id5_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t queue_id6; /* * ID of CoS Queue 6. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id6_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t queue_id7; /* * ID of CoS Queue 7. FF - Invalid id # This ID can be used on * any subsequent call to an hwrm command that takes a queue id. * # IDs must always be queried by this command before any use * by the driver or software. # Any driver or software should * not make any assumptions about queue IDs. # A value of 0xff * indicates that the queue is not available. # Available queues * may not be in sequential order. */ uint8_t queue_id7_service_profile; /* This value is applicable to CoS queues only. */ /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) /* Lossless */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) /* * Set to 0xFF... (All Fs) if there is no * service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_alloc */ /* * Description: This VNIC is a resource in the RX side of the chip that is used * to represent a virtual host "interface". # At the time of VNIC allocation or * configuration, the function can specify whether it wants the requested VNIC * to be the default VNIC for the function or not. # If a function requests * allocation of a VNIC for the first time and a VNIC is successfully allocated * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC * for that function. # The default VNIC shall be used for the default action * for a partition or function. # For each VNIC allocated on a function, a * mapping on the RX side to map the allocated VNIC to source virtual interface * shall be performed by the HWRM. This should be hidden to the function driver * requesting the VNIC allocation. This enables broadcast/multicast replication * with source knockout. # If multicast replication with source knockout is * enabled, then the internal VNIC to SVIF mapping data structures shall be * programmed at the time of VNIC allocation. */ /* Input (24 bytes) */ struct hwrm_vnic_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * When this bit is '1', this VNIC is requested to be the * default VNIC for this function. */ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1) uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t vnic_id; /* Logical vnic ID */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_free */ /* * Description: Free a VNIC resource. Idle any resources associated with the * VNIC as well as the VNIC. Reset and release all resources associated with the * VNIC. */ /* Input (24 bytes) */ struct hwrm_vnic_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t vnic_id; /* Logical vnic ID */ uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_cfg */ /* Description: Configure the RX VNIC structure. */ /* Input (40 bytes) */ struct hwrm_vnic_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * When this bit is '1', the VNIC is requested to be the default * VNIC for the function. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1) /* * When this bit is '1', the VNIC is being configured to strip * VLAN in the RX path. If set to '0', then VLAN stripping is * disabled on this VNIC. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2) /* * When this bit is '1', the VNIC is being configured to buffer * receive packets in the hardware until the host posts new * receive buffers. If set to '0', then bd_stall is being * configured to be disabled on this VNIC. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4) /* * When this bit is '1', the VNIC is being configured to receive * both RoCE and non-RoCE traffic. If set to '0', then this VNIC * is not configured to be operating in dual VNIC mode. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8) /* * When this flag is set to '1', the VNIC is requested to be * configured to receive only RoCE traffic. If this flag is set * to '0', then this flag shall be ignored by the HWRM. If * roce_dual_vnic_mode flag is set to '1', then the HWRM client * shall not set this flag to '1'. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10) /* * When a VNIC uses one destination ring group for certain * application (e.g. Receive Flow Steering) where exact match is * used to direct packets to a VNIC with one destination ring * group only, there is no need to configure RSS indirection * table for that VNIC as only one destination ring group is * used. This flag is used to enable a mode where RSS is enabled * in the VNIC using a RSS context for computing RSS hash but * the RSS indirection table is not configured using * hwrm_vnic_rss_cfg. If this mode is enabled, then the driver * should not program RSS indirection table for the RSS context * that is used for computing RSS hash only. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20) /* * When this bit is '1', the VNIC is being configured to receive * both RoCE and non-RoCE traffic, but forward only the RoCE * traffic further. Also, RoCE traffic can be mirrored to L2 * driver. */ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ UINT32_C(0x40) uint32_t enables; /* * This bit must be '1' for the dflt_ring_grp field to be * configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1) /* This bit must be '1' for the rss_rule field to be configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2) /* This bit must be '1' for the cos_rule field to be configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4) /* This bit must be '1' for the lb_rule field to be configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8) /* This bit must be '1' for the mru field to be configured. */ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10) uint16_t vnic_id; /* Logical vnic ID */ uint16_t dflt_ring_grp; /* * Default Completion ring for the VNIC. This ring will be * chosen if packet does not match any RSS rules and if there is * no COS rule. */ uint16_t rss_rule; /* * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if * there is no RSS rule. */ uint16_t cos_rule; /* * RSS ID for COS rule/table structure. 0xFF... (All Fs) if * there is no COS rule. */ uint16_t lb_rule; /* * RSS ID for load balancing rule/table structure. 0xFF... (All * Fs) if there is no LB rule. */ uint16_t mru; /* * The maximum receive unit of the vnic. Each vnic is associated * with a function. The vnic mru value overwrites the mru * setting of the associated function. The HWRM shall make sure * that vnic mru does not exceed the mru of the port the * function is associated with. */ uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_qcfg */ /* * Description: Query the RX VNIC structure. This function can be used by a PF * driver to query its own VNIC resource or VNIC resource of its child VF. This * function can also be used by a VF driver to query its own VNIC resource. */ /* Input (32 bytes) */ struct hwrm_vnic_qcfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the vf_id_valid field to be configured. */ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1) uint32_t vnic_id; /* Logical vnic ID */ uint16_t vf_id; /* ID of Virtual Function whose VNIC resource is being queried. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (32 bytes) */ struct hwrm_vnic_qcfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t dflt_ring_grp; /* Default Completion ring for the VNIC. */ uint16_t rss_rule; /* * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if * there is no RSS rule. */ uint16_t cos_rule; /* * RSS ID for COS rule/table structure. 0xFF... (All Fs) if * there is no COS rule. */ uint16_t lb_rule; /* * RSS ID for load balancing rule/table structure. 0xFF... (All * Fs) if there is no LB rule. */ uint16_t mru; /* The maximum receive unit of the vnic. */ uint8_t unused_0; uint8_t unused_1; uint32_t flags; /* * When this bit is '1', the VNIC is the default VNIC for the * function. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT UINT32_C(0x1) /* * When this bit is '1', the VNIC is configured to strip VLAN in * the RX path. If set to '0', then VLAN stripping is disabled * on this VNIC. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2) /* * When this bit is '1', the VNIC is configured to buffer * receive packets in the hardware until the host posts new * receive buffers. If set to '0', then bd_stall is disabled on * this VNIC. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4) /* * When this bit is '1', the VNIC is configured to receive both * RoCE and non-RoCE traffic. If set to '0', then this VNIC is * not configured to operate in dual VNIC mode. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8) /* * When this flag is set to '1', the VNIC is configured to * receive only RoCE traffic. When this flag is set to '0', the * VNIC is not configured to receive only RoCE traffic. If * roce_dual_vnic_mode flag and this flag both are set to '1', * then it is an invalid configuration of the VNIC. The HWRM * should not allow that type of mis-configuration by HWRM * clients. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10) /* * When a VNIC uses one destination ring group for certain * application (e.g. Receive Flow Steering) where exact match is * used to direct packets to a VNIC with one destination ring * group only, there is no need to configure RSS indirection * table for that VNIC as only one destination ring group is * used. When this bit is set to '1', then the VNIC is enabled * in a mode where RSS is enabled in the VNIC using a RSS * context for computing RSS hash but the RSS indirection table * is not configured. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20) /* * When this bit is '1', the VNIC is configured to receive both * RoCE and non-RoCE traffic, but forward only RoCE traffic * further. Also RoCE traffic can be mirrored to L2 driver. */ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_MIRRORING_CAPABLE_VNIC_MODE \ UINT32_C(0x40) uint32_t unused_2; uint8_t unused_3; uint8_t unused_4; uint8_t unused_5; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_tpa_cfg */ /* Description: This function is used to enable/configure TPA on the VNIC. */ /* Input (40 bytes) */ struct hwrm_vnic_tpa_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * When this bit is '1', the VNIC shall be configured to perform * transparent packet aggregation (TPA) of non-tunneled TCP * packets. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA UINT32_C(0x1) /* * When this bit is '1', the VNIC shall be configured to perform * transparent packet aggregation (TPA) of tunneled TCP packets. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA UINT32_C(0x2) /* * When this bit is '1', the VNIC shall be configured to perform * transparent packet aggregation (TPA) according to Windows * Receive Segment Coalescing (RSC) rules. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE UINT32_C(0x4) /* * When this bit is '1', the VNIC shall be configured to perform * transparent packet aggregation (TPA) according to Linux * Generic Receive Offload (GRO) rules. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO UINT32_C(0x8) /* * When this bit is '1', the VNIC shall be configured to perform * transparent packet aggregation (TPA) for TCP packets with IP * ECN set to non-zero. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN UINT32_C(0x10) /* * When this bit is '1', the VNIC shall be configured to perform * transparent packet aggregation (TPA) for GRE tunneled TCP * packets only if all packets have the same GRE sequence. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \ UINT32_C(0x20) /* * When this bit is '1' and the GRO mode is enabled, the VNIC * shall be configured to perform transparent packet aggregation * (TPA) for TCP/IPv4 packets with consecutively increasing * IPIDs. In other words, the last packet that is being * aggregated to an already existing aggregation context shall * have IPID 1 more than the IPID of the last packet that was * aggregated in that aggregation context. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK UINT32_C(0x40) /* * When this bit is '1' and the GRO mode is enabled, the VNIC * shall be configured to perform transparent packet aggregation * (TPA) for TCP packets with the same TTL (IPv4) or Hop limit * (IPv6) value. */ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK UINT32_C(0x80) uint32_t enables; /* This bit must be '1' for the max_agg_segs field to be configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1) /* This bit must be '1' for the max_aggs field to be configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2) /* * This bit must be '1' for the max_agg_timer field to be * configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4) /* This bit must be '1' for the min_agg_len field to be configured. */ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8) uint16_t vnic_id; /* Logical vnic ID */ uint16_t max_agg_segs; /* * This is the maximum number of TCP segments that can be * aggregated (unit is Log2). Max value is 31. */ /* 1 segment */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0) /* 2 segments */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1) /* 4 segments */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2) /* 8 segments */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3) /* Any segment size larger than this is not valid */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f) uint16_t max_aggs; /* * This is the maximum number of aggregations this VNIC is * allowed (unit is Log2). Max value is 7 */ /* 1 aggregation */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0) /* 2 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1) /* 4 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2) /* 8 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3) /* 16 aggregations */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4) /* Any aggregation size larger than this is not valid */ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7) uint8_t unused_0; uint8_t unused_1; uint32_t max_agg_timer; /* * This is the maximum amount of time allowed for an aggregation * context to complete after it was initiated. */ uint32_t min_agg_len; /* * This is the minimum amount of payload length required to * start an aggregation context. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_tpa_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_rss_cfg */ /* Description: This function is used to enable RSS configuration. */ /* Input (48 bytes) */ struct hwrm_vnic_rss_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t hash_type; /* * When this bit is '1', the RSS hash shall be computed over * source and destination IPv4 addresses of IPv4 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1) /* * When this bit is '1', the RSS hash shall be computed over * source/destination IPv4 addresses and source/destination * ports of TCP/IPv4 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2) /* * When this bit is '1', the RSS hash shall be computed over * source/destination IPv4 addresses and source/destination * ports of UDP/IPv4 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4) /* * When this bit is '1', the RSS hash shall be computed over * source and destination IPv4 addresses of IPv6 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8) /* * When this bit is '1', the RSS hash shall be computed over * source/destination IPv6 addresses and source/destination * ports of TCP/IPv6 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10) /* * When this bit is '1', the RSS hash shall be computed over * source/destination IPv6 addresses and source/destination * ports of UDP/IPv6 packets. */ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20) uint32_t unused_0; uint64_t ring_grp_tbl_addr; /* This is the address for rss ring group table */ uint64_t hash_key_tbl_addr; /* This is the address for rss hash key table */ uint16_t rss_ctx_idx; /* Index to the rss indirection table. */ uint16_t unused_1[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_rss_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_plcmodes_cfg */ /* * Description: This function can be used to set placement mode configuration of * the VNIC. */ /* Input (40 bytes) */ struct hwrm_vnic_plcmodes_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format for the * rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request will be * optionally completed on. If the value is -1, then no CR completion * will be generated. Any other value must be a valid CR ring_id value * for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written when the * request is complete. This area must be 16B aligned and must be * cleared to zero before the request is made. */ uint32_t flags; /* * When this bit is '1', the VNIC shall be configured to use regular * placement algorithm. By default, the regular placement algorithm * shall be enabled on the VNIC. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \ UINT32_C(0x1) /* * When this bit is '1', the VNIC shall be configured use the jumbo * placement algorithm. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \ UINT32_C(0x2) /* * When this bit is '1', the VNIC shall be configured to enable Header- * Data split for IPv4 packets according to the following rules: # If * the packet is identified as TCP/IPv4, then the packet is split at the * beginning of the TCP payload. # If the packet is identified as * UDP/IPv4, then the packet is split at the beginning of UDP payload. # * If the packet is identified as non-TCP and non-UDP IPv4 packet, then * the packet is split at the beginning of the upper layer protocol * header carried in the IPv4 packet. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 UINT32_C(0x4) /* * When this bit is '1', the VNIC shall be configured to enable Header- * Data split for IPv6 packets according to the following rules: # If * the packet is identified as TCP/IPv6, then the packet is split at the * beginning of the TCP payload. # If the packet is identified as * UDP/IPv6, then the packet is split at the beginning of UDP payload. # * If the packet is identified as non-TCP and non-UDP IPv6 packet, then * the packet is split at the beginning of the upper layer protocol * header carried in the IPv6 packet. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 UINT32_C(0x8) /* * When this bit is '1', the VNIC shall be configured to enable Header- * Data split for FCoE packets at the beginning of FC payload. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE UINT32_C(0x10) /* * When this bit is '1', the VNIC shall be configured to enable Header- * Data split for RoCE packets at the beginning of RoCE payload (after * BTH/GRH headers). */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE UINT32_C(0x20) uint32_t enables; /* * This bit must be '1' for the jumbo_thresh_valid field to be * configured. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \ UINT32_C(0x1) /* * This bit must be '1' for the hds_offset_valid field to be configured. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \ UINT32_C(0x2) /* * This bit must be '1' for the hds_threshold_valid field to be * configured. */ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \ UINT32_C(0x4) uint32_t vnic_id; /* Logical vnic ID */ uint16_t jumbo_thresh; /* * When jumbo placement algorithm is enabled, this value is used to * determine the threshold for jumbo placement. Packets with length * larger than this value will be placed according to the jumbo * placement algorithm. */ uint16_t hds_offset; /* * This value is used to determine the offset into packet buffer where * the split data (payload) will be placed according to one of of HDS * placement algorithm. The lengths of packet buffers provided for split * data shall be larger than this value. */ uint16_t hds_threshold; /* * When one of the HDS placement algorithm is enabled, this value is * used to determine the threshold for HDS placement. Packets with * length larger than this value will be placed according to the HDS * placement algorithm. This value shall be in multiple of 4 bytes. */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_plcmodes_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in parameters, * and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last byte of * the response is a valid flag that will read as '1' when the command * has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the output is * completely written to RAM. This field should be read as '1' to * indicate that the output has been completely written. When writing a * command completion or response to an internal processor, the order of * writes has to be such that this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_plcmodes_qcfg */ /* * Description: This function can be used to query placement mode configuration * of the VNIC. */ /* Input (24 bytes) */ struct hwrm_vnic_plcmodes_qcfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format for the * rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request will be * optionally completed on. If the value is -1, then no CR completion * will be generated. Any other value must be a valid CR ring_id value * for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written when the * request is complete. This area must be 16B aligned and must be * cleared to zero before the request is made. */ uint32_t vnic_id; /* Logical vnic ID */ uint32_t unused_0; } __attribute__((packed)); /* Output (24 bytes) */ struct hwrm_vnic_plcmodes_qcfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in parameters, * and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last byte of * the response is a valid flag that will read as '1' when the command * has been completely written to memory. */ uint32_t flags; /* * When this bit is '1', the VNIC is configured to use regular placement * algorithm. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \ UINT32_C(0x1) /* * When this bit is '1', the VNIC is configured to use the jumbo * placement algorithm. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \ UINT32_C(0x2) /* * When this bit is '1', the VNIC is configured to enable Header-Data * split for IPv4 packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 UINT32_C(0x4) /* * When this bit is '1', the VNIC is configured to enable Header-Data * split for IPv6 packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 UINT32_C(0x8) /* * When this bit is '1', the VNIC is configured to enable Header-Data * split for FCoE packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE UINT32_C(0x10) /* * When this bit is '1', the VNIC is configured to enable Header-Data * split for RoCE packets. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE UINT32_C(0x20) /* * When this bit is '1', the VNIC is configured to be the default VNIC * of the requesting function. */ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC UINT32_C(0x40) uint16_t jumbo_thresh; /* * When jumbo placement algorithm is enabled, this value is used to * determine the threshold for jumbo placement. Packets with length * larger than this value will be placed according to the jumbo * placement algorithm. */ uint16_t hds_offset; /* * This value is used to determine the offset into packet buffer where * the split data (payload) will be placed according to one of of HDS * placement algorithm. The lengths of packet buffers provided for split * data shall be larger than this value. */ uint16_t hds_threshold; /* * When one of the HDS placement algorithm is enabled, this value is * used to determine the threshold for HDS placement. Packets with * length larger than this value will be placed according to the HDS * placement algorithm. This value shall be in multiple of 4 bytes. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t unused_4; uint8_t valid; /* * This field is used in Output records to indicate that the output is * completely written to RAM. This field should be read as '1' to * indicate that the output has been completely written. When writing a * command completion or response to an internal processor, the order of * writes has to be such that this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_rss_cos_lb_ctx_alloc */ /* Description: This function is used to allocate COS/Load Balance context. */ /* Input (16 bytes) */ struct hwrm_vnic_rss_cos_lb_ctx_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_rss_cos_lb_ctx_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t rss_cos_lb_ctx_id; /* rss_cos_lb_ctx_id is 16 b */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t unused_4; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_vnic_rss_cos_lb_ctx_free */ /* Description: This function can be used to free COS/Load Balance context. */ /* Input (24 bytes) */ struct hwrm_vnic_rss_cos_lb_ctx_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t rss_cos_lb_ctx_id; /* rss_cos_lb_ctx_id is 16 b */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_vnic_rss_cos_lb_ctx_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_ring_alloc */ /* * Description: This command allocates and does basic preparation for a ring. */ /* Input (80 bytes) */ struct hwrm_ring_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the Reserved1 field to be configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1) /* This bit must be '1' for the ring_arb_cfg field to be configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG UINT32_C(0x2) /* This bit must be '1' for the Reserved3 field to be configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4) /* * This bit must be '1' for the stat_ctx_id_valid field to be * configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8) /* This bit must be '1' for the Reserved4 field to be configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10) /* This bit must be '1' for the max_bw_valid field to be configured. */ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20) uint8_t ring_type; /* Ring Type. */ /* L2 Completion Ring (CR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) /* TX Ring (TR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1) /* RX Ring (RR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2) /* RoCE Notification Completion Ring (ROCE_CR) */ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) uint8_t unused_0; uint16_t unused_1; uint64_t page_tbl_addr; /* This value is a pointer to the page table for the Ring. */ uint32_t fbo; /* First Byte Offset of the first entry in the first page. */ uint8_t page_size; /* * Actual page size in 2^page_size. The supported range is * increments in powers of 2 from 16 bytes to 1GB. - 4 = 16 B * Page size is 16 B. - 12 = 4 KB Page size is 4 KB. - 13 = 8 KB * Page size is 8 KB. - 16 = 64 KB Page size is 64 KB. - 21 = 2 * MB Page size is 2 MB. - 22 = 4 MB Page size is 4 MB. - 30 = 1 * GB Page size is 1 GB. */ uint8_t page_tbl_depth; /* * This value indicates the depth of page table. For this * version of the specification, value other than 0 or 1 shall * be considered as an invalid value. When the page_tbl_depth = * 0, then it is treated as a special case with the following. * 1. FBO and page size fields are not valid. 2. page_tbl_addr * is the physical address of the first element of the ring. */ uint8_t unused_2; uint8_t unused_3; uint32_t length; /* * Number of 16B units in the ring. Minimum size for a ring is * 16 16B entries. */ uint16_t logical_id; /* * Logical ring number for the ring to be allocated. This value * determines the position in the doorbell area where the update * to the ring will be made. For completion rings, this value is * also the MSI-X vector number for the function the completion * ring is associated with. */ uint16_t cmpl_ring_id; /* * This field is used only when ring_type is a TX ring. This * value indicates what completion ring the TX ring is * associated with. */ uint16_t queue_id; /* * This field is used only when ring_type is a TX ring. This * value indicates what CoS queue the TX ring is associated * with. */ uint8_t unused_4; uint8_t unused_5; uint32_t reserved1; /* This field is reserved for the future use. It shall be set to 0. */ uint16_t ring_arb_cfg; /* * This field is used only when ring_type is a TX ring. This * field is used to configure arbitration related parameters for * a TX ring. */ /* Arbitration policy used for the ring. */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK UINT32_C(0xf) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0 /* * Use strict priority for the TX ring. Priority * value is specified in arb_policy_param */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \ (UINT32_C(0x1) << 0) /* * Use weighted fair queue arbitration for the * TX ring. Weight is specified in * arb_policy_param */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \ (UINT32_C(0x2) << 0) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \ RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ /* Reserved field. */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK UINT32_C(0xf0) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4 /* * Arbitration policy specific parameter. # For strict priority * arbitration policy, this field represents a priority value. * If set to 0, then the priority is not specified and the HWRM * is allowed to select any priority for this TX ring. # For * weighted fair queue arbitration policy, this field represents * a weight value. If set to 0, then the weight is not specified * and the HWRM is allowed to select any weight for this TX * ring. */ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \ UINT32_C(0xff00) #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8 uint8_t unused_6; uint8_t unused_7; uint32_t reserved3; /* This field is reserved for the future use. It shall be set to 0. */ uint32_t stat_ctx_id; /* * This field is used only when ring_type is a TX ring. This * input indicates what statistics context this ring should be * associated with. */ uint32_t reserved4; /* This field is reserved for the future use. It shall be set to 0. */ uint32_t max_bw; /* * This field is used only when ring_type is a TX ring to * specify maximum BW allocated to the TX ring. The HWRM will * translate this value into byte counter and time interval used * for this ring inside the device. */ /* The bandwidth value. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff) #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0 /* The granularity of the value (bits or bytes). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE UINT32_C(0x10000000) /* Value is in bits. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28) /* Value is in bytes. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28) #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \ RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES /* bw_value_unit is 3 b */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \ UINT32_C(0xe0000000) #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29 /* Value is in Mb or MB (base 10). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \ (UINT32_C(0x0) << 29) /* Value is in Kb or KB (base 10). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \ (UINT32_C(0x2) << 29) /* Value is in bits or bytes. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \ (UINT32_C(0x4) << 29) /* Value is in Gb or GB (base 10). */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \ (UINT32_C(0x6) << 29) /* Value is in 1/100th of a percentage of total bandwidth. */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \ (UINT32_C(0x1) << 29) /* Invalid unit */ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \ (UINT32_C(0x7) << 29) #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \ RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID uint8_t int_mode; /* * This field is used only when ring_type is a Completion ring. * This value indicates what interrupt mode should be used on * this completion ring. Note: In the legacy interrupt mode, no * more than 16 completion rings are allowed. */ /* Legacy INTA */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0) /* Reserved */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1) /* MSI-X */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2) /* No Interrupt - Polled mode */ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3) uint8_t unused_8[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_ring_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t ring_id; /* * Physical number of ring allocated. This value shall be unique * for a ring type. */ uint16_t logical_ring_id; /* Logical number of ring allocated. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_ring_free */ /* * Description: This command is used to free a ring and associated resources. * With QoS and DCBx agents, it is possible the traffic classes will be moved * from one CoS queue to another. When this occurs, the driver shall call * 'hwrm_ring_free' to free the allocated rings and then call 'hwrm_ring_alloc' * to re-allocate each ring and assign it to a new CoS queue. hwrm_ring_free * shall be called on a ring only after it has been idle for 500ms or more and * no frames have been posted to the ring during this time. All frames queued * for transmission shall be completed and at least 500ms time elapsed from the * last completion before calling this command. */ /* Input (24 bytes) */ struct hwrm_ring_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint8_t ring_type; /* Ring Type. */ /* L2 Completion Ring (CR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0) /* TX Ring (TR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1) /* RX Ring (RR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2) /* RoCE Notification Completion Ring (ROCE_CR) */ #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3) uint8_t unused_0; uint16_t ring_id; /* Physical number of ring allocated. */ uint32_t unused_1; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_ring_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_ring_grp_alloc */ /* * Description: This API allocates and does basic preparation for a ring group. */ /* Input (24 bytes) */ struct hwrm_ring_grp_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint16_t cr; /* This value identifies the CR associated with the ring group. */ uint16_t rr; /* This value identifies the main RR associated with the ring group. */ uint16_t ar; /* * This value identifies the aggregation RR associated with the * ring group. If this value is 0xFF... (All Fs), then no * Aggregation ring will be set. */ uint16_t sc; /* * This value identifies the statistics context associated with * the ring group. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_ring_grp_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t ring_group_id; /* * This is the ring group ID value. Use this value to program * the default ring group for the VNIC or as table entries in an * RSS/COS context. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_ring_grp_free */ /* * Description: This API frees a ring group and associated resources. # If a * ring in the ring group is reset or free, then the associated rings in the * ring group shall also be reset/free using hwrm_ring_free. # A function driver * shall always use hwrm_ring_grp_free after freeing all rings in a group. # As * a part of executing this command, the HWRM shall reset all associated ring * group resources. */ /* Input (24 bytes) */ struct hwrm_ring_grp_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t ring_group_id; /* This is the ring group ID value. */ uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_ring_grp_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_l2_filter_alloc */ /* * Description: An L2 filter is a filter resource that is used to identify a * vnic or ring for a packet based on layer 2 fields. Layer 2 fields for * encapsulated packets include both outer L2 header and/or inner l2 header of * encapsulated packet. The L2 filter resource covers the following OS specific * L2 filters. Linux/FreeBSD (per function): # Broadcast enable/disable # List * of individual multicast filters # All multicast enable/disable filter # * Unicast filters # Promiscuous mode VMware: # Broadcast enable/disable (per * physical function) # All multicast enable/disable (per function) # Unicast * filters per ring or vnic # Promiscuous mode per PF Windows: # Broadcast * enable/disable (per physical function) # List of individual multicast filters * (Driver needs to advertise the maximum number of filters supported) # All * multicast enable/disable per physical function # Unicast filters per vnic # * Promiscuous mode per PF Implementation notes on the use of VNIC in this * command: # By default, these filters belong to default vnic for the function. * # Once these filters are set up, only destination VNIC can be modified. # If * the destination VNIC is not specified in this command, then the HWRM shall * only create an l2 context id. HWRM Implementation notes for multicast * filters: # The hwrm_filter_alloc command can be used to set up multicast * filters (perfect match or partial match). Each individual function driver can * set up multicast filters independently. # The HWRM needs to keep track of * multicast filters set up by function drivers and maintain multicast group * replication records to enable a subset of functions to receive traffic for a * specific multicast address. # When a specific multicast filter cannot be set, * the HWRM shall return an error. In this error case, the driver should fall * back to using one general filter (rather than specific) for all multicast * traffic. # When the SR-IOV is enabled, the HWRM needs to additionally track * source knockout per multicast group record. Examples of setting unicast * filters: For a unicast MAC based filter, one can use a combination of the * fields and masks provided in this command to set up the filter. Below are * some examples: # MAC + no VLAN filter: This filter is used to identify * traffic that does not contain any VLAN tags and matches destination (or * source) MAC address. This filter can be set up by setting only l2_addr field * to be a valid field. All other fields are not valid. The following value is * set for l2_addr. l2_addr = MAC # MAC + Any VLAN filter: This filter is used * to identify traffic that carries single VLAN tag and matches (destination or * source) MAC address. This filter can be set up by setting only l2_addr and * l2_ovlan_mask fields to be valid fields. All other fields are not valid. The * following values are set for those two valid fields. l2_addr = MAC, * l2_ovlan_mask = 0xFFFF # MAC + no VLAN or VLAN ID=0: This filter is used to * identify untagged traffic that does not contain any VLAN tags or a VLAN tag * with VLAN ID = 0 and matches destination (or source) MAC address. This filter * can be set up by setting only l2_addr and l2_ovlan fields to be valid fields. * All other fields are not valid. The following value are set for l2_addr and * l2_ovlan. l2_addr = MAC, l2_ovlan = 0x0 # MAC + no VLAN or any VLAN: This * filter is used to identify traffic that contains zero or 1 VLAN tag and * matches destination (or source) MAC address. This filter can be set up by * setting only l2_addr, l2_ovlan, and l2_mask fields to be valid fields. All * other fields are not valid. The following value are set for l2_addr, * l2_ovlan, and l2_mask fields. l2_addr = MAC, l2_ovlan = 0x0, l2_ovlan_mask = * 0xFFFF # MAC + VLAN ID filter: This filter can be set up by setting only * l2_addr, l2_ovlan, and l2_ovlan_mask fields to be valid fields. All other * fields are not valid. The following values are set for those three valid * fields. l2_addr = MAC, l2_ovlan = VLAN ID, l2_ovlan_mask = 0xF000 */ /* Input (96 bytes) */ struct hwrm_cfa_l2_filter_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. This * enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \ (UINT32_C(0x0) << 0) /* rx path */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \ (UINT32_C(0x1) << 0) #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \ CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX /* * Setting of this flag indicates the applicability to the * loopback path. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2) /* * Setting of this flag indicates drop action. If this flag is * not set, then it should be considered accept action. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4) /* * If this flag is set, all t_l2_* fields are invalid and they * should not be specified. If this flag is set, then l2_* * fields refer to fields of outermost L2 header. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8) uint32_t enables; /* This bit must be '1' for the l2_addr field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1) /* This bit must be '1' for the l2_addr_mask field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \ UINT32_C(0x2) /* This bit must be '1' for the l2_ovlan field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4) /* * This bit must be '1' for the l2_ovlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \ UINT32_C(0x8) /* This bit must be '1' for the l2_ivlan field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10) /* * This bit must be '1' for the l2_ivlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \ UINT32_C(0x20) /* This bit must be '1' for the t_l2_addr field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40) /* * This bit must be '1' for the t_l2_addr_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \ UINT32_C(0x80) /* This bit must be '1' for the t_l2_ovlan field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \ UINT32_C(0x100) /* * This bit must be '1' for the t_l2_ovlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \ UINT32_C(0x200) /* This bit must be '1' for the t_l2_ivlan field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \ UINT32_C(0x400) /* * This bit must be '1' for the t_l2_ivlan_mask field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \ UINT32_C(0x800) /* This bit must be '1' for the src_type field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000) /* This bit must be '1' for the src_id field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000) /* This bit must be '1' for the tunnel_type field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x4000) /* This bit must be '1' for the dst_id field to be configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x10000) uint8_t l2_addr[6]; /* * This value sets the match value for the L2 MAC address. * Destination MAC address for RX path. Source MAC address for * TX path. */ uint8_t unused_0; uint8_t unused_1; uint8_t l2_addr_mask[6]; /* * This value sets the mask value for the L2 address. A value of * 0 will mask the corresponding bit from compare. */ uint16_t l2_ovlan; /* This value sets VLAN ID value for outer VLAN. */ uint16_t l2_ovlan_mask; /* * This value sets the mask value for the ovlan id. A value of 0 * will mask the corresponding bit from compare. */ uint16_t l2_ivlan; /* This value sets VLAN ID value for inner VLAN. */ uint16_t l2_ivlan_mask; /* * This value sets the mask value for the ivlan id. A value of 0 * will mask the corresponding bit from compare. */ uint8_t unused_2; uint8_t unused_3; uint8_t t_l2_addr[6]; /* * This value sets the match value for the tunnel L2 MAC * address. Destination MAC address for RX path. Source MAC * address for TX path. */ uint8_t unused_4; uint8_t unused_5; uint8_t t_l2_addr_mask[6]; /* * This value sets the mask value for the tunnel L2 address. A * value of 0 will mask the corresponding bit from compare. */ uint16_t t_l2_ovlan; /* This value sets VLAN ID value for tunnel outer VLAN. */ uint16_t t_l2_ovlan_mask; /* * This value sets the mask value for the tunnel ovlan id. A * value of 0 will mask the corresponding bit from compare. */ uint16_t t_l2_ivlan; /* This value sets VLAN ID value for tunnel inner VLAN. */ uint16_t t_l2_ivlan_mask; /* * This value sets the mask value for the tunnel ivlan id. A * value of 0 will mask the corresponding bit from compare. */ uint8_t src_type; /* This value identifies the type of source of the packet. */ /* Network port */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0) /* Physical function */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1) /* Virtual function */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2) /* Virtual NIC of a function */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3) /* Embedded processor for CFA management */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4) /* Embedded processor for OOB management */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5) /* Embedded processor for RoCE */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6) /* Embedded processor for network proxy functions */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7) uint8_t unused_6; uint32_t src_id; /* * This value is the id of the source. For a network port, it * represents port_id. For a physical function, it represents * fid. For a virtual function, it represents vf_id. For a vnic, * it represents vnic_id. For embedded processors, this id is * not valid. Notes: 1. The function ID is implied if it src_id * is not provided for a src_type that is either */ uint8_t tunnel_type; /* Tunnel Type. */ /* Non-tunnel */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* * Network Virtualization Generic Routing * Encapsulation (NVGRE) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* * Generic Routing Encapsulation (GRE) inside * Ethernet payload */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7) /* * Generic Routing Encapsulation (GRE) inside IP * datagram payload */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8) /* * IPV4 over virtual eXtensible Local Area * Network (IPV4oVXLAN) */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) /* Any tunneled traffic */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) uint8_t unused_7; uint16_t dst_id; /* * If set, this value shall represent the Logical VNIC ID of the * destination VNIC for the RX path and network port id of the * destination port for the TX path. */ uint16_t mirror_vnic_id; /* Logical VNIC ID of the VNIC where traffic is mirrored. */ uint8_t pri_hint; /* * This hint is provided to help in placing the filter in the * filter table. */ /* No preference */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ UINT32_C(0x0) /* Above the given filter */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \ UINT32_C(0x1) /* Below the given filter */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \ UINT32_C(0x2) /* As high as possible */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3) /* As low as possible */ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN UINT32_C(0x4) uint8_t unused_8; uint32_t unused_9; uint64_t l2_filter_id_hint; /* * This is the ID of the filter that goes along with the * pri_hint. This field is valid only for the following values. * 1 - Above the given filter 2 - Below the given filter */ } __attribute__((packed)); /* Output (24 bytes) */ struct hwrm_cfa_l2_filter_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint64_t l2_filter_id; /* * This value identifies a set of CFA data structures used for * an L2 context. */ uint32_t flow_id; /* * This is the ID of the flow associated with this filter. This * value shall be used to match and associate the flow * identifier returned in completion records. A value of * 0xFFFFFFFF shall indicate no flow id. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_l2_filter_free */ /* * Description: Free a L2 filter. The HWRM shall free all associated filter * resources with the L2 filter. */ /* Input (24 bytes) */ struct hwrm_cfa_l2_filter_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint64_t l2_filter_id; /* * This value identifies a set of CFA data structures used for * an L2 context. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_cfa_l2_filter_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_l2_filter_cfg */ /* Description: Change the configuration of an existing L2 filter */ /* Input (40 bytes) */ struct hwrm_cfa_l2_filter_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. This * enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \ (UINT32_C(0x0) << 0) /* rx path */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \ (UINT32_C(0x1) << 0) #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \ CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX /* * Setting of this flag indicates drop action. If this flag is * not set, then it should be considered accept action. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2) uint32_t enables; /* This bit must be '1' for the dst_id field to be configured. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID UINT32_C(0x1) /* * This bit must be '1' for the new_mirror_vnic_id field to be * configured. */ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) uint64_t l2_filter_id; /* * This value identifies a set of CFA data structures used for * an L2 context. */ uint32_t dst_id; /* * If set, this value shall represent the Logical VNIC ID of the * destination VNIC for the RX path and network port id of the * destination port for the TX path. */ uint32_t new_mirror_vnic_id; /* New Logical VNIC ID of the VNIC where traffic is mirrored. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_cfa_l2_filter_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_l2_set_rx_mask */ /* Description: This command will set rx mask of the function. */ /* Input (56 bytes) */ struct hwrm_cfa_l2_set_rx_mask_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t vnic_id; /* VNIC ID */ uint32_t mask; /* Reserved for future use. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1) /* * When this bit is '1', the function is requested to accept * multi-cast packets specified by the multicast addr table. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2) /* * When this bit is '1', the function is requested to accept all * multi-cast packets. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4) /* * When this bit is '1', the function is requested to accept * broadcast packets. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8) /* * When this bit is '1', the function is requested to be put in * the promiscuous mode. The HWRM should accept any function to * set up promiscuous mode. The HWRM shall follow the semantics * below for the promiscuous mode support. # When partitioning * is not enabled on a port (i.e. single PF on the port), then * the PF shall be allowed to be in the promiscuous mode. When * the PF is in the promiscuous mode, then it shall receive all * host bound traffic on that port. # When partitioning is * enabled on a port (i.e. multiple PFs per port) and a PF on * that port is in the promiscuous mode, then the PF receives * all traffic within that partition as identified by a unique * identifier for the PF (e.g. S-Tag). If a unique outer VLAN * for the PF is specified, then the setting of promiscuous mode * on that PF shall result in the PF receiving all host bound * traffic with matching outer VLAN. # A VF shall can be set in * the promiscuous mode. In the promiscuous mode, the VF does * not receive any traffic unless a unique outer VLAN for the VF * is specified. If a unique outer VLAN for the VF is specified, * then the setting of promiscuous mode on that VF shall result * in the VF receiving all host bound traffic with the matching * outer VLAN. # The HWRM shall allow the setting of promiscuous * mode on a function independently from the promiscuous mode * settings on other functions. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10) /* * If this flag is set, the corresponding RX filters shall be * set up to cover multicast/broadcast filters for the outermost * Layer 2 destination MAC address field. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20) /* * If this flag is set, the corresponding RX filters shall be * set up to cover multicast/broadcast filters for the VLAN- * tagged packets that match the TPID and VID fields of VLAN * tags in the VLAN tag table specified in this command. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40) /* * If this flag is set, the corresponding RX filters shall be * set up to cover multicast/broadcast filters for non-VLAN * tagged packets and VLAN-tagged packets that match the TPID * and VID fields of VLAN tags in the VLAN tag table specified * in this command. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80) /* * If this flag is set, the corresponding RX filters shall be * set up to cover multicast/broadcast filters for non-VLAN * tagged packets and VLAN-tagged packets matching any VLAN tag. * If this flag is set, then the HWRM shall ignore VLAN tags * specified in vlan_tag_tbl. If none of vlanonly, vlan_nonvlan, * and anyvlan_nonvlan flags is set, then the HWRM shall ignore * VLAN tags specified in vlan_tag_tbl. The HWRM client shall * set at most one flag out of vlanonly, vlan_nonvlan, and * anyvlan_nonvlan. */ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \ UINT32_C(0x100) uint64_t mc_tbl_addr; /* This is the address for mcast address tbl. */ uint32_t num_mc_entries; /* * This value indicates how many entries in mc_tbl are valid. * Each entry is 6 bytes. */ uint32_t unused_0; uint64_t vlan_tag_tbl_addr; /* * This is the address for VLAN tag table. Each VLAN entry in * the table is 4 bytes of a VLAN tag including TPID, PCP, DEI, * and VID fields in network byte order. */ uint32_t num_vlan_tags; /* * This value indicates how many entries in vlan_tag_tbl are * valid. Each entry is 4 bytes. */ uint32_t unused_1; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_cfa_l2_set_rx_mask_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* Command specific Error Codes (8 bytes) */ struct hwrm_cfa_l2_set_rx_mask_cmd_err { uint8_t code; /* * command specific error codes that goes to the cmd_err field * in Common HWRM Error Response. */ /* Unknown error */ #define HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* * Unable to complete operation due to conflict * with Ntuple Filter */ #define \ HWRM_CFA_L2_SET_RX_MASK_CMD_ERR_CODE_NTUPLE_FILTER_CONFLICT_ERR \ UINT32_C(0x1) uint8_t unused_0[7]; } __attribute__((packed)); /* hwrm_cfa_vlan_antispoof_cfg */ /* Description: Configures vlan anti-spoof filters for VF. */ /* Input (32 bytes) */ struct hwrm_cfa_vlan_antispoof_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format for the * rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request will be * optionally completed on. If the value is -1, then no CR completion * will be generated. Any other value must be a valid CR ring_id value * for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written when the * request is complete. This area must be 16B aligned and must be * cleared to zero before the request is made. */ uint16_t fid; /* * Function ID of the function that is being configured. Only valid for * a VF FID configured by the PF. */ uint8_t unused_0; uint8_t unused_1; uint32_t num_vlan_entries; /* Number of VLAN entries in the vlan_tag_mask_tbl. */ uint64_t vlan_tag_mask_tbl_addr; /* * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN antispoof * table. Each table entry contains the 16-bit TPID (0x8100 or 0x88a8 * only), 16-bit VLAN ID, and a 16-bit mask, all in network order to * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, the mask * value should be 0xfff for the 12-bit VLAN ID. */ }; /* Output (16 bytes) */ struct hwrm_cfa_vlan_antispoof_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in parameters, * and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last byte of * the response is a valid flag that will read as '1' when the command * has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the output is * completely written to RAM. This field should be read as '1' to * indicate that the output has been completely written. When writing a * command completion or response to an internal processor, the order of * writes has to be such that this field is written last. */ }; /* hwrm_cfa_ntuple_filter_alloc */ /* * Description: This is a ntuple filter that uses fields from L4/L3 header and * optionally fields from L2. The ntuple filters apply to receive traffic only. * All L2/L3/L4 header fields are specified in network byte order. These filters * can be used for Receive Flow Steering (RFS). # For ethertype value, only * 0x0800 (IPv4) and 0x86dd (IPv6) shall be supported for ntuple filters. # If a * field specified in this command is not enabled as a valid field, then that * field shall not be used in matching packet header fields against this filter. */ /* Input (128 bytes) */ struct hwrm_cfa_ntuple_filter_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * Setting of this flag indicates the applicability to the * loopback path. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK \ UINT32_C(0x1) /* * Setting of this flag indicates drop action. If this flag is * not set, then it should be considered accept action. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x2) /* * Setting of this flag indicates that a meter is expected to be * attached to this flow. This hint can be used when choosing * the action record format required for the flow. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_FLAGS_METER UINT32_C(0x4) uint32_t enables; /* This bit must be '1' for the l2_filter_id field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_L2_FILTER_ID \ UINT32_C(0x1) /* This bit must be '1' for the ethertype field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_ETHERTYPE \ UINT32_C(0x2) /* This bit must be '1' for the tunnel_type field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \ UINT32_C(0x4) /* This bit must be '1' for the src_macaddr field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_MACADDR \ UINT32_C(0x8) /* This bit must be '1' for the ipaddr_type field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IPADDR_TYPE \ UINT32_C(0x10) /* This bit must be '1' for the src_ipaddr field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR \ UINT32_C(0x20) /* * This bit must be '1' for the src_ipaddr_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_IPADDR_MASK \ UINT32_C(0x40) /* This bit must be '1' for the dst_ipaddr field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR \ UINT32_C(0x80) /* * This bit must be '1' for the dst_ipaddr_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_IPADDR_MASK \ UINT32_C(0x100) /* This bit must be '1' for the ip_protocol field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_IP_PROTOCOL \ UINT32_C(0x200) /* This bit must be '1' for the src_port field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT \ UINT32_C(0x400) /* * This bit must be '1' for the src_port_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_SRC_PORT_MASK \ UINT32_C(0x800) /* This bit must be '1' for the dst_port field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT \ UINT32_C(0x1000) /* * This bit must be '1' for the dst_port_mask field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_PORT_MASK \ UINT32_C(0x2000) /* This bit must be '1' for the pri_hint field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_PRI_HINT \ UINT32_C(0x4000) /* * This bit must be '1' for the ntuple_filter_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_NTUPLE_FILTER_ID \ UINT32_C(0x8000) /* This bit must be '1' for the dst_id field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_ID \ UINT32_C(0x10000) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x20000) /* This bit must be '1' for the dst_macaddr field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_ENABLES_DST_MACADDR \ UINT32_C(0x40000) uint64_t l2_filter_id; /* * This value identifies a set of CFA data structures used for * an L2 context. */ uint8_t src_macaddr[6]; /* * This value indicates the source MAC address in the Ethernet * header. */ uint16_t ethertype; /* This value indicates the ethertype in the Ethernet header. */ uint8_t ip_addr_type; /* * This value indicates the type of IP address. 4 - IPv4 6 - * IPv6 All others are invalid. */ /* invalid */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN \ UINT32_C(0x0) /* IPv4 */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 \ UINT32_C(0x4) /* IPv6 */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 \ UINT32_C(0x6) uint8_t ip_protocol; /* * The value of protocol filed in IP header. Applies to UDP and * TCP traffic. 6 - TCP 17 - UDP */ /* invalid */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN \ UINT32_C(0x0) /* TCP */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_TCP \ UINT32_C(0x6) /* UDP */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_IP_PROTOCOL_UDP \ UINT32_C(0x11) uint16_t dst_id; /* * If set, this value shall represent the Logical VNIC ID of the * destination VNIC for the RX path and network port id of the * destination port for the TX path. */ uint16_t mirror_vnic_id; /* Logical VNIC ID of the VNIC where traffic is mirrored. */ uint8_t tunnel_type; /* * This value indicates the tunnel type for this filter. If this * field is not specified, then the filter shall apply to both * non-tunneled and tunneled packets. If this field conflicts * with the tunnel_type specified in the l2_filter_id, then the * HWRM shall return an error for this command. */ /* Non-tunnel */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* * Network Virtualization Generic Routing * Encapsulation (NVGRE) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \ UINT32_C(0x2) /* * Generic Routing Encapsulation (GRE) inside * Ethernet payload */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE \ UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP \ UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS \ UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7) /* * Generic Routing Encapsulation (GRE) inside IP * datagram payload */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE \ UINT32_C(0x8) /* Any tunneled traffic */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) uint8_t pri_hint; /* * This hint is provided to help in placing the filter in the * filter table. */ /* No preference */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \ UINT32_C(0x0) /* Above the given filter */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE UINT32_C(0x1) /* Below the given filter */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_BELOW UINT32_C(0x2) /* As high as possible */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_HIGHEST \ UINT32_C(0x3) /* As low as possible */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_INPUT_PRI_HINT_LOWEST UINT32_C(0x4) uint32_t src_ipaddr[4]; /* * The value of source IP address to be used in filtering. For * IPv4, first four bytes represent the IP address. */ uint32_t src_ipaddr_mask[4]; /* * The value of source IP address mask to be used in filtering. * For IPv4, first four bytes represent the IP address mask. */ uint32_t dst_ipaddr[4]; /* * The value of destination IP address to be used in filtering. * For IPv4, first four bytes represent the IP address. */ uint32_t dst_ipaddr_mask[4]; /* * The value of destination IP address mask to be used in * filtering. For IPv4, first four bytes represent the IP * address mask. */ uint16_t src_port; /* * The value of source port to be used in filtering. Applies to * UDP and TCP traffic. */ uint16_t src_port_mask; /* * The value of source port mask to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t dst_port; /* * The value of destination port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t dst_port_mask; /* * The value of destination port mask to be used in filtering. * Applies to UDP and TCP traffic. */ uint64_t ntuple_filter_id_hint; /* This is the ID of the filter that goes along with the pri_hint. */ } __attribute__((packed)); /* Output (24 bytes) */ struct hwrm_cfa_ntuple_filter_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint64_t ntuple_filter_id; /* This value is an opaque id into CFA data structures. */ uint32_t flow_id; /* * This is the ID of the flow associated with this filter. This * value shall be used to match and associate the flow * identifier returned in completion records. A value of * 0xFFFFFFFF shall indicate no flow id. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* Command specific Error Codes (8 bytes) */ struct hwrm_cfa_ntuple_filter_alloc_cmd_err { uint8_t code; /* * command specific error codes that goes to the cmd_err field * in Common HWRM Error Response. */ /* Unknown error */ #define HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0) /* * Unable to complete operation due to conflict * with Rx Mask VLAN */ #define \ HWRM_CFA_NTUPLE_FILTER_ALLOC_CMD_ERR_CODE_RX_MASK_VLAN_CONFLICT_ERR \ UINT32_C(0x1) uint8_t unused_0[7]; } __attribute__((packed)); /* hwrm_cfa_ntuple_filter_free */ /* Description: Free an ntuple filter */ /* Input (24 bytes) */ struct hwrm_cfa_ntuple_filter_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint64_t ntuple_filter_id; /* This value is an opaque id into CFA data structures. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_cfa_ntuple_filter_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_ntuple_filter_cfg */ /* * Description: Configure an ntuple filter with a new destination VNIC and/or * meter. */ /* Input (48 bytes) */ struct hwrm_cfa_ntuple_filter_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the new_dst_id field to be configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_DST_ID \ UINT32_C(0x1) /* * This bit must be '1' for the new_mirror_vnic_id field to be * configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) /* * This bit must be '1' for the new_meter_instance_id field to * be configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \ UINT32_C(0x4) uint32_t unused_0; uint64_t ntuple_filter_id; /* This value is an opaque id into CFA data structures. */ uint32_t new_dst_id; /* * If set, this value shall represent the new Logical VNIC ID of * the destination VNIC for the RX path and new network port id * of the destination port for the TX path. */ uint32_t new_mirror_vnic_id; /* New Logical VNIC ID of the VNIC where traffic is mirrored. */ uint16_t new_meter_instance_id; /* * New meter to attach to the flow. Specifying the invalid * instance ID is used to remove any existing meter from the * flow. */ /* * A value of 0xfff is considered invalid and * implies the instance is not configured. */ #define HWRM_CFA_NTUPLE_FILTER_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) uint16_t unused_1[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_cfa_ntuple_filter_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_em_flow_alloc */ /* * Description: This is a generic Exact Match (EM) flow that uses fields from * L4/L3/L2 headers. The EM flows apply to transmit and receive traffic. All * L2/L3/L4 header fields are specified in network byte order. For each EM flow, * there is an associated set of actions specified. For tunneled packets, all * L2/L3/L4 fields specified are fields of inner headers unless otherwise * specified. # If a field specified in this command is not enabled as a valid * field, then that field shall not be used in matching packet header fields * against this EM flow entry. */ /* Input (112 bytes) */ struct hwrm_cfa_em_flow_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t flags; /* * Enumeration denoting the RX, TX type of the resource. This * enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_TX \ (UINT32_C(0x0) << 0) /* rx path */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX \ (UINT32_C(0x1) << 0) #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_LAST \ CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PATH_RX /* * Setting of this flag indicates enabling of a byte counter for * a given flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_BYTE_CTR UINT32_C(0x2) /* * Setting of this flag indicates enabling of a packet counter * for a given flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_PKT_CTR UINT32_C(0x4) /* * Setting of this flag indicates de-capsulation action for the * given flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DECAP UINT32_C(0x8) /* * Setting of this flag indicates encapsulation action for the * given flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_ENCAP UINT32_C(0x10) /* * Setting of this flag indicates drop action. If this flag is * not set, then it should be considered accept action. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x20) /* * Setting of this flag indicates that a meter is expected to be * attached to this flow. This hint can be used when choosing * the action record format required for the flow. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_FLAGS_METER UINT32_C(0x40) uint32_t enables; /* This bit must be '1' for the l2_filter_id field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_L2_FILTER_ID UINT32_C(0x1) /* This bit must be '1' for the tunnel_type field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x2) /* This bit must be '1' for the tunnel_id field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_TUNNEL_ID UINT32_C(0x4) /* This bit must be '1' for the src_macaddr field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_MACADDR UINT32_C(0x8) /* This bit must be '1' for the dst_macaddr field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_MACADDR UINT32_C(0x10) /* This bit must be '1' for the ovlan_vid field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_OVLAN_VID UINT32_C(0x20) /* This bit must be '1' for the ivlan_vid field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IVLAN_VID UINT32_C(0x40) /* This bit must be '1' for the ethertype field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ETHERTYPE UINT32_C(0x80) /* This bit must be '1' for the src_ipaddr field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_IPADDR UINT32_C(0x100) /* This bit must be '1' for the dst_ipaddr field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_IPADDR UINT32_C(0x200) /* This bit must be '1' for the ipaddr_type field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IPADDR_TYPE UINT32_C(0x400) /* This bit must be '1' for the ip_protocol field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_IP_PROTOCOL UINT32_C(0x800) /* This bit must be '1' for the src_port field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_SRC_PORT UINT32_C(0x1000) /* This bit must be '1' for the dst_port field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_PORT UINT32_C(0x2000) /* This bit must be '1' for the dst_id field to be configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x4000) /* * This bit must be '1' for the mirror_vnic_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \ UINT32_C(0x8000) /* * This bit must be '1' for the encap_record_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_ENCAP_RECORD_ID \ UINT32_C(0x10000) /* * This bit must be '1' for the meter_instance_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_ENABLES_METER_INSTANCE_ID \ UINT32_C(0x20000) uint64_t l2_filter_id; /* * This value identifies a set of CFA data structures used for * an L2 context. */ uint8_t tunnel_type; /* Tunnel Type. */ /* Non-tunnel */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \ UINT32_C(0x0) /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1) /* * Network Virtualization Generic Routing * Encapsulation (NVGRE) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2) /* * Generic Routing Encapsulation (GRE) inside * Ethernet payload */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3) /* IP in IP */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5) /* Multi-Protocol Lable Switching (MPLS) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6) /* Stateless Transport Tunnel (STT) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7) /* * Generic Routing Encapsulation (GRE) inside IP * datagram payload */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8) /* * IPV4 over virtual eXtensible Local Area * Network (IPV4oVXLAN) */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 UINT32_C(0x9) /* Any tunneled traffic */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \ UINT32_C(0xff) uint8_t unused_0; uint16_t unused_1; uint32_t tunnel_id; /* * Tunnel identifier. Virtual Network Identifier (VNI). Only * valid with tunnel_types VXLAN, NVGRE, and Geneve. Only lower * 24-bits of VNI field are used in setting up the filter. */ uint8_t src_macaddr[6]; /* * This value indicates the source MAC address in the Ethernet * header. */ uint16_t meter_instance_id; /* The meter instance to attach to the flow. */ /* * A value of 0xfff is considered invalid and * implies the instance is not configured. */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) uint8_t dst_macaddr[6]; /* * This value indicates the destination MAC address in the * Ethernet header. */ uint16_t ovlan_vid; /* * This value indicates the VLAN ID of the outer VLAN tag in the * Ethernet header. */ uint16_t ivlan_vid; /* * This value indicates the VLAN ID of the inner VLAN tag in the * Ethernet header. */ uint16_t ethertype; /* This value indicates the ethertype in the Ethernet header. */ uint8_t ip_addr_type; /* * This value indicates the type of IP address. 4 - IPv4 6 - * IPv6 All others are invalid. */ /* invalid */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_UNKNOWN UINT32_C(0x0) /* IPv4 */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV4 UINT32_C(0x4) /* IPv6 */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_ADDR_TYPE_IPV6 UINT32_C(0x6) uint8_t ip_protocol; /* * The value of protocol filed in IP header. Applies to UDP and * TCP traffic. 6 - TCP 17 - UDP */ /* invalid */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UNKNOWN UINT32_C(0x0) /* TCP */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_TCP UINT32_C(0x6) /* UDP */ #define HWRM_CFA_EM_FLOW_ALLOC_INPUT_IP_PROTOCOL_UDP UINT32_C(0x11) uint8_t unused_2; uint8_t unused_3; uint32_t src_ipaddr[4]; /* * The value of source IP address to be used in filtering. For * IPv4, first four bytes represent the IP address. */ uint32_t dst_ipaddr[4]; /* * big_endian = True The value of destination IP address to be * used in filtering. For IPv4, first four bytes represent the * IP address. */ uint16_t src_port; /* * The value of source port to be used in filtering. Applies to * UDP and TCP traffic. */ uint16_t dst_port; /* * The value of destination port to be used in filtering. * Applies to UDP and TCP traffic. */ uint16_t dst_id; /* * If set, this value shall represent the Logical VNIC ID of the * destination VNIC for the RX path and network port id of the * destination port for the TX path. */ uint16_t mirror_vnic_id; /* Logical VNIC ID of the VNIC where traffic is mirrored. */ uint32_t encap_record_id; /* Logical ID of the encapsulation record. */ uint32_t unused_4; } __attribute__((packed)); /* Output (24 bytes) */ struct hwrm_cfa_em_flow_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint64_t em_filter_id; /* This value is an opaque id into CFA data structures. */ uint32_t flow_id; /* * This is the ID of the flow associated with this filter. This * value shall be used to match and associate the flow * identifier returned in completion records. A value of * 0xFFFFFFFF shall indicate no flow id. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_em_flow_free */ /* Description: Free an EM flow table entry */ /* Input (24 bytes) */ struct hwrm_cfa_em_flow_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint64_t em_filter_id; /* This value is an opaque id into CFA data structures. */ } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_cfa_em_flow_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_cfa_em_flow_cfg */ /* * Description: Configure an EM flow with a new destination VNIC and/or meter. */ /* Input (48 bytes) */ struct hwrm_cfa_em_flow_cfg_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t enables; /* This bit must be '1' for the new_dst_id field to be configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_DST_ID UINT32_C(0x1) /* * This bit must be '1' for the new_mirror_vnic_id field to be * configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \ UINT32_C(0x2) /* * This bit must be '1' for the new_meter_instance_id field to * be configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_ENABLES_NEW_METER_INSTANCE_ID \ UINT32_C(0x4) uint32_t unused_0; uint64_t em_filter_id; /* This value is an opaque id into CFA data structures. */ uint32_t new_dst_id; /* * If set, this value shall represent the new Logical VNIC ID of * the destination VNIC for the RX path and network port id of * the destination port for the TX path. */ uint32_t new_mirror_vnic_id; /* New Logical VNIC ID of the VNIC where traffic is mirrored. */ uint16_t new_meter_instance_id; /* * New meter to attach to the flow. Specifying the invalid * instance ID is used to remove any existing meter from the * flow. */ /* * A value of 0xfff is considered invalid and * implies the instance is not configured. */ #define HWRM_CFA_EM_FLOW_CFG_INPUT_NEW_METER_INSTANCE_ID_INVALID \ UINT32_C(0xffff) uint16_t unused_1[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_cfa_em_flow_cfg_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_tunnel_dst_port_query */ /* * Description: This function is called by a driver to query tunnel type * specific destination port configuration. */ /* Input (24 bytes) */ struct hwrm_tunnel_dst_port_query_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint8_t tunnel_type; /* Tunnel Type. */ /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \ UINT32_C(0x1) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* * IPV4 over virtual eXtensible Local Area * Network (IPV4oVXLAN) */ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) uint8_t unused_0[7]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_tunnel_dst_port_query_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t tunnel_dst_port_id; /* * This field represents the identifier of L4 destination port * used for the given tunnel type. This field is valid for * specific tunnel types that use layer 4 (e.g. UDP) transports * for tunneling. */ uint16_t tunnel_dst_port_val; /* * This field represents the value of L4 destination port * identified by tunnel_dst_port_id. This field is valid for * specific tunnel types that use layer 4 (e.g. UDP) transports * for tunneling. This field is in network byte order. A value * of 0 means that the destination port is not configured. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_tunnel_dst_port_alloc */ /* * Description: This function is called by a driver to allocate l4 destination * port for a specific tunnel type. The destination port value is provided in * the input. If the HWRM supports only one global destination port for a tunnel * type, then the HWRM shall keep track of its usage as described below. # The * first caller that allocates a destination port shall always succeed and the * HWRM shall save the destination port configuration for that tunnel type and * increment the usage count to 1. # Subsequent callers allocating the same * destination port for that tunnel type shall succeed and the HWRM shall * increment the usage count for that port for each subsequent caller that * succeeds. # Any subsequent caller trying to allocate a different destination * port for that tunnel type shall fail until the usage count for the original * destination port goes to zero. # A caller that frees a port will cause the * usage count for that port to decrement. */ /* Input (24 bytes) */ struct hwrm_tunnel_dst_port_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint8_t tunnel_type; /* Tunnel Type. */ /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \ UINT32_C(0x5) /* * IPV4 over virtual eXtensible Local Area * Network (IPV4oVXLAN) */ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) uint8_t unused_0; uint16_t tunnel_dst_port_val; /* * This field represents the value of L4 destination port used * for the given tunnel type. This field is valid for specific * tunnel types that use layer 4 (e.g. UDP) transports for * tunneling. This field is in network byte order. A value of 0 * shall fail the command. */ uint32_t unused_1; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_tunnel_dst_port_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint16_t tunnel_dst_port_id; /* * Identifier of a tunnel L4 destination port value. Only * applies to tunnel types that has l4 destination port * parameters. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t unused_4; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_tunnel_dst_port_free */ /* * Description: This function is called by a driver to free l4 destination port * for a specific tunnel type. */ /* Input (24 bytes) */ struct hwrm_tunnel_dst_port_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint8_t tunnel_type; /* Tunnel Type. */ /* Virtual eXtensible Local Area Network (VXLAN) */ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1) /* Generic Network Virtualization Encapsulation (Geneve) */ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5) /* * IPV4 over virtual eXtensible Local Area * Network (IPV4oVXLAN) */ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \ UINT32_C(0x9) uint8_t unused_0; uint16_t tunnel_dst_port_id; /* * Identifier of a tunnel L4 destination port value. Only * applies to tunnel types that has l4 destination port * parameters. */ uint32_t unused_1; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_tunnel_dst_port_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_stat_ctx_alloc */ /* * Description: This command allocates and does basic preparation for a stat * context. */ /* Input (32 bytes) */ struct hwrm_stat_ctx_alloc_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint64_t stats_dma_addr; /* This is the address for statistic block. */ uint32_t update_period_ms; /* * The statistic block update period in ms. e.g. 250ms, 500ms, * 750ms, 1000ms. If update_period_ms is 0, then the stats * update shall be never done and the DMA address shall not be * used. In this case, the stat block can only be read by * hwrm_stat_ctx_query command. */ uint8_t stat_ctx_flags; /* * This field is used to specify statistics context specific * configuration flags. */ /* * When this bit is set to '1', the statistics context shall be * allocated for RoCE traffic only. In this case, traffic other * than offloaded RoCE traffic shall not be included in this * statistic context. When this bit is set to '0', the * statistics context shall be used for the network traffic * other than offloaded RoCE traffic. */ #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1) uint8_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_stat_ctx_alloc_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t stat_ctx_id; /* This is the statistics context ID value. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_stat_ctx_free */ /* Description: This command is used to free a stat context. */ /* Input (24 bytes) */ struct hwrm_stat_ctx_free_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t stat_ctx_id; /* ID of the statistics context that is being queried. */ uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_stat_ctx_free_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t stat_ctx_id; /* This is the statistics context ID value. */ uint8_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_stat_ctx_query */ /* Description: This command returns statistics of a context. */ /* Input (24 bytes) */ struct hwrm_stat_ctx_query_input { uint16_t req_type; /* * This value indicates what type of request this is. The format for the * rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request will be * optionally completed on. If the value is -1, then no CR completion * will be generated. Any other value must be a valid CR ring_id value * for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written when the * request is complete. This area must be 16B aligned and must be * cleared to zero before the request is made. */ uint32_t stat_ctx_id; /* ID of the statistics context that is being queried. */ uint32_t unused_0; } __attribute__((packed)); /* Output (176 bytes) */ struct hwrm_stat_ctx_query_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in parameters, * and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last byte of * the response is a valid flag that will read as '1' when the command * has been completely written to memory. */ uint64_t tx_ucast_pkts; /* Number of transmitted unicast packets */ uint64_t tx_mcast_pkts; /* Number of transmitted multicast packets */ uint64_t tx_bcast_pkts; /* Number of transmitted broadcast packets */ uint64_t tx_err_pkts; /* Number of transmitted packets with error */ uint64_t tx_drop_pkts; /* Number of dropped packets on transmit path */ uint64_t tx_ucast_bytes; /* Number of transmitted bytes for unicast traffic */ uint64_t tx_mcast_bytes; /* Number of transmitted bytes for multicast traffic */ uint64_t tx_bcast_bytes; /* Number of transmitted bytes for broadcast traffic */ uint64_t rx_ucast_pkts; /* Number of received unicast packets */ uint64_t rx_mcast_pkts; /* Number of received multicast packets */ uint64_t rx_bcast_pkts; /* Number of received broadcast packets */ uint64_t rx_err_pkts; /* Number of received packets with error */ uint64_t rx_drop_pkts; /* Number of dropped packets on received path */ uint64_t rx_ucast_bytes; /* Number of received bytes for unicast traffic */ uint64_t rx_mcast_bytes; /* Number of received bytes for multicast traffic */ uint64_t rx_bcast_bytes; /* Number of received bytes for broadcast traffic */ uint64_t rx_agg_pkts; /* Number of aggregated unicast packets */ uint64_t rx_agg_bytes; /* Number of aggregated unicast bytes */ uint64_t rx_agg_events; /* Number of aggregation events */ uint64_t rx_agg_aborts; /* Number of aborted aggregations */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the output is * completely written to RAM. This field should be read as '1' to * indicate that the output has been completely written. When writing a * command completion or response to an internal processor, the order of * writes has to be such that this field is written last. */ } __attribute__((packed)); /* hwrm_stat_ctx_clr_stats */ /* Description: This command clears statistics of a context. */ /* Input (24 bytes) */ struct hwrm_stat_ctx_clr_stats_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t stat_ctx_id; /* ID of the statistics context that is being queried. */ uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_stat_ctx_clr_stats_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_exec_fwd_resp */ /* * Description: This command is used to send an encapsulated request to the * HWRM. This command instructs the HWRM to execute the request and forward the * response of the encapsulated request to the location specified in the * original request that is encapsulated. The target id of this command shall be * set to 0xFFFF (HWRM). The response location in this command shall be used to * acknowledge the receipt of the encapsulated request and forwarding of the * response. */ /* Input (128 bytes) */ struct hwrm_exec_fwd_resp_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t encap_request[26]; /* * This is an encapsulated request. This request should be * executed by the HWRM and the response should be provided in * the response buffer inside the encapsulated request. */ uint16_t encap_resp_target_id; /* * This value indicates the target id of the response to the * encapsulated request. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - * HWRM */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_exec_fwd_resp_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_reject_fwd_resp */ /* * Description: This command is used to send an encapsulated request to the * HWRM. This command instructs the HWRM to reject the request and forward the * error response of the encapsulated request to the location specified in the * original request that is encapsulated. The target id of this command shall be * set to 0xFFFF (HWRM). The response location in this command shall be used to * acknowledge the receipt of the encapsulated request and forwarding of the * response. */ /* Input (128 bytes) */ struct hwrm_reject_fwd_resp_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint32_t encap_request[26]; /* * This is an encapsulated request. This request should be * rejected by the HWRM and the error response should be * provided in the response buffer inside the encapsulated * request. */ uint16_t encap_resp_target_id; /* * This value indicates the target id of the response to the * encapsulated request. 0x0 - 0xFFF8 - Used for function ids * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - * HWRM */ uint16_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_reject_fwd_resp_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_nvm_get_dir_entries */ /* Input (24 bytes) */ struct hwrm_nvm_get_dir_entries_input { uint16_t req_type; uint16_t cmpl_ring; uint16_t seq_id; uint16_t target_id; uint64_t resp_addr; uint64_t host_dest_addr; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_nvm_get_dir_entries_output { uint16_t error_code; uint16_t req_type; uint16_t seq_id; uint16_t resp_len; uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; } __attribute__((packed)); /* hwrm_nvm_erase_dir_entry */ /* Input (24 bytes) */ struct hwrm_nvm_erase_dir_entry_input { uint16_t req_type; uint16_t cmpl_ring; uint16_t seq_id; uint16_t target_id; uint64_t resp_addr; uint16_t dir_idx; uint16_t unused_0[3]; }; /* Output (16 bytes) */ struct hwrm_nvm_erase_dir_entry_output { uint16_t error_code; uint16_t req_type; uint16_t seq_id; uint16_t resp_len; uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; }; /* hwrm_nvm_get_dir_info */ /* Input (16 bytes) */ struct hwrm_nvm_get_dir_info_input { uint16_t req_type; uint16_t cmpl_ring; uint16_t seq_id; uint16_t target_id; uint64_t resp_addr; } __attribute__((packed)); /* Output (24 bytes) */ struct hwrm_nvm_get_dir_info_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t entries; /* Number of directory entries in the directory. */ uint32_t entry_length; /* Size of each directory entry, in bytes. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_nvm_write */ /* * Note: Write to the allocated NVRAM of an item referenced by an existing * directory entry. */ /* Input (48 bytes) */ struct hwrm_nvm_write_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint64_t host_src_addr; /* 64-bit Host Source Address. This is where the source data is. */ uint16_t dir_type; /* * The Directory Entry Type (valid values are defined in the * bnxnvm_directory_type enum defined in the file * bnxnvm_defs.h). */ uint16_t dir_ordinal; /* * Directory ordinal. The 0-based instance of the combined * Directory Entry Type and Extension. */ uint16_t dir_ext; /* * The Directory Entry Extension flags (see BNX_DIR_EXT_* in the * file bnxnvm_defs.h). */ uint16_t dir_attr; /* * Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the * file bnxnvm_defs.h). */ uint32_t dir_data_length; /* * Length of data to write, in bytes. May be less than or equal * to the allocated size for the directory entry. The data * length stored in the directory entry will be updated to * reflect this value once the write is complete. */ uint16_t option; /* Option. */ uint16_t flags; /* * When this bit is '1', the original active image will not be * removed. TBD: what purpose is this? */ #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG UINT32_C(0x1) uint32_t dir_item_length; /* * The requested length of the allocated NVM for the item, in * bytes. This value may be greater than or equal to the * specified data length (dir_data_length). If this value is * less than the specified data length, it will be ignored. The * response will contain the actual allocated item length, which * may be greater than the requested item length. The purpose * for allocating more than the required number of bytes for an * item's data is to pre-allocate extra storage (padding) to * accommodate the potential future growth of an item (e.g. * upgraded firmware with a size increase, log growth, expanded * configuration data). */ uint32_t unused_0; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_nvm_write_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t dir_item_length; /* * Length of the allocated NVM for the item, in bytes. The value * may be greater than or equal to the specified data length or * the requested item length. The actual item length used when * creating a new directory entry will be a multiple of an NVM * block size. */ uint16_t dir_idx; /* The directory index of the created or modified item. */ uint8_t unused_0; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* hwrm_nvm_read */ /* * Note: Read the contents of an NVRAM item as referenced (indexed) by an * existing directory entry. */ /* Input (40 bytes) */ struct hwrm_nvm_read_input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ uint64_t host_dest_addr; /* * 64-bit Host Destination Address. This is the host address * where the data will be written to. */ uint16_t dir_idx; /* The 0-based index of the directory entry. */ uint8_t unused_0; uint8_t unused_1; uint32_t offset; /* The NVRAM byte-offset to read from. */ uint32_t len; /* The length of the data to be read, in bytes. */ uint32_t unused_2; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_nvm_read_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t unused_0; uint8_t unused_1; uint8_t unused_2; uint8_t unused_3; uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* Hardware Resource Manager Specification */ /* Description: This structure is used to specify port description. */ /* * Note: The Hardware Resource Manager (HWRM) manages various hardware resources * inside the chip. The HWRM is implemented in firmware, and runs on embedded * processors inside the chip. This firmware service is vital part of the chip. * The chip can not be used by a driver or HWRM client without the HWRM. */ /* Input (16 bytes) */ struct input { uint16_t req_type; /* * This value indicates what type of request this is. The format * for the rest of the command is determined by this field. */ uint16_t cmpl_ring; /* * This value indicates the what completion ring the request * will be optionally completed on. If the value is -1, then no * CR completion will be generated. Any other value must be a * valid CR ring_id value for this function. */ uint16_t seq_id; /* This value indicates the command sequence number. */ uint16_t target_id; /* * Target ID of this command. 0x0 - 0xFFF8 - Used for function * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF * - HWRM */ uint64_t resp_addr; /* * This is the host address where the response will be written * when the request is complete. This area must be 16B aligned * and must be cleared to zero before the request is made. */ } __attribute__((packed)); /* Output (8 bytes) */ struct output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ } __attribute__((packed)); /* Short Command Structure (16 bytes) */ struct hwrm_short_input { uint16_t req_type; /* * This field indicates the type of request in the request * buffer. The format for the rest of the command (request) is * determined by this field. */ uint16_t signature; /* * This field indicates a signature that is used to identify * short form of the command listed here. This field shall be * set to 17185 (0x4321). */ /* Signature indicating this is a short form of HWRM command */ #define HWRM_SHORT_REQ_SIGNATURE_SHORT_CMD UINT32_C(0x4321) uint16_t unused_0; /* Reserved for future use. */ uint16_t size; /* This value indicates the length of the request. */ uint64_t req_addr; /* * This is the host address where the request was written. This * area must be 16B aligned. */ } __attribute__((packed)); #define HWRM_GET_HWRM_ERROR_CODE(arg) \ { \ typeof(arg) x = (arg); \ ((x) == 0xf ? "HWRM_ERROR" : \ ((x) == 0xffff ? "CMD_NOT_SUPPORTED" : \ ((x) == 0xfffe ? "UNKNOWN_ERR" : \ ((x) == 0x4 ? "RESOURCE_ALLOC_ERROR" : \ ((x) == 0x5 ? "INVALID_FLAGS" : \ ((x) == 0x6 ? "INVALID_ENABLES" : \ ((x) == 0x0 ? "SUCCESS" : \ ((x) == 0x1 ? "FAIL" : \ ((x) == 0x2 ? "INVALID_PARAMS" : \ ((x) == 0x3 ? "RESOURCE_ACCESS_DENIED" : \ "Unknown error_code")))))))))) \ } /* Return Codes (8 bytes) */ struct ret_codes { uint16_t error_code; /* These are numbers assigned to return/error codes. */ /* Request was successfully executed by the HWRM. */ #define HWRM_ERR_CODE_SUCCESS (UINT32_C(0x0)) /* THe HWRM failed to execute the request. */ #define HWRM_ERR_CODE_FAIL (UINT32_C(0x1)) /* * The request contains invalid argument(s) or * input parameters. */ #define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2)) /* * The requester is not allowed to access the * requested resource. This error code shall be * provided in a response to a request to query * or modify an existing resource that is not * accessible by the requester. */ #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3)) /* * The HWRM is unable to allocate the requested * resource. This code only applies to requests * for HWRM resource allocations. */ #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR (UINT32_C(0x4)) /* Invalid combination of flags is specified in the request. */ #define HWRM_ERR_CODE_INVALID_FLAGS (UINT32_C(0x5)) /* * Invalid combination of enables fields is * specified in the request. */ #define HWRM_ERR_CODE_INVALID_ENABLES (UINT32_C(0x6)) /* * Generic HWRM execution error that represents * an internal error. */ #define HWRM_ERR_CODE_HWRM_ERROR (UINT32_C(0xf)) /* Unknown error */ #define HWRM_ERR_CODE_UNKNOWN_ERR (UINT32_C(0xfffe)) /* Unsupported or invalid command */ #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED (UINT32_C(0xffff)) uint16_t unused_0[3]; } __attribute__((packed)); /* Output (16 bytes) */ struct hwrm_err_output { uint16_t error_code; /* * Pass/Fail or error type Note: receiver to verify the in * parameters, and fail the call with an error when appropriate */ uint16_t req_type; /* This field returns the type of original request. */ uint16_t seq_id; /* This field provides original sequence number of the command. */ uint16_t resp_len; /* * This field is the length of the response in bytes. The last * byte of the response is a valid flag that will read as '1' * when the command has been completely written to memory. */ uint32_t opaque_0; /* debug info for this error response. */ uint16_t opaque_1; /* debug info for this error response. */ uint8_t cmd_err; /* * In the case of an error response, command specific error code * is returned in this field. */ uint8_t valid; /* * This field is used in Output records to indicate that the * output is completely written to RAM. This field should be * read as '1' to indicate that the output has been completely * written. When writing a command completion or response to an * internal processor, the order of writes has to be such that * this field is written last. */ } __attribute__((packed)); /* Port Tx Statistics Formats (408 bytes) */ struct tx_port_stats { uint64_t tx_64b_frames; /* Total Number of 64 Bytes frames transmitted */ uint64_t tx_65b_127b_frames; /* Total Number of 65-127 Bytes frames transmitted */ uint64_t tx_128b_255b_frames; /* Total Number of 128-255 Bytes frames transmitted */ uint64_t tx_256b_511b_frames; /* Total Number of 256-511 Bytes frames transmitted */ uint64_t tx_512b_1023b_frames; /* Total Number of 512-1023 Bytes frames transmitted */ uint64_t tx_1024b_1518_frames; /* Total Number of 1024-1518 Bytes frames transmitted */ uint64_t tx_good_vlan_frames; /* * Total Number of each good VLAN (exludes FCS errors) frame * transmitted which is 1519 to 1522 bytes in length inclusive * (excluding framing bits but including FCS bytes). */ uint64_t tx_1519b_2047_frames; /* Total Number of 1519-2047 Bytes frames transmitted */ uint64_t tx_2048b_4095b_frames; /* Total Number of 2048-4095 Bytes frames transmitted */ uint64_t tx_4096b_9216b_frames; /* Total Number of 4096-9216 Bytes frames transmitted */ uint64_t tx_9217b_16383b_frames; /* Total Number of 9217-16383 Bytes frames transmitted */ uint64_t tx_good_frames; /* Total Number of good frames transmitted */ uint64_t tx_total_frames; /* Total Number of frames transmitted */ uint64_t tx_ucast_frames; /* Total number of unicast frames transmitted */ uint64_t tx_mcast_frames; /* Total number of multicast frames transmitted */ uint64_t tx_bcast_frames; /* Total number of broadcast frames transmitted */ uint64_t tx_pause_frames; /* Total number of PAUSE control frames transmitted */ uint64_t tx_pfc_frames; /* Total number of PFC/per-priority PAUSE control frames transmitted */ uint64_t tx_jabber_frames; /* Total number of jabber frames transmitted */ uint64_t tx_fcs_err_frames; /* Total number of frames transmitted with FCS error */ uint64_t tx_control_frames; /* Total number of control frames transmitted */ uint64_t tx_oversz_frames; /* Total number of over-sized frames transmitted */ uint64_t tx_single_dfrl_frames; /* Total number of frames with single deferral */ uint64_t tx_multi_dfrl_frames; /* Total number of frames with multiple deferrals */ uint64_t tx_single_coll_frames; /* Total number of frames with single collision */ uint64_t tx_multi_coll_frames; /* Total number of frames with multiple collisions */ uint64_t tx_late_coll_frames; /* Total number of frames with late collisions */ uint64_t tx_excessive_coll_frames; /* Total number of frames with excessive collisions */ uint64_t tx_frag_frames; /* Total number of fragmented frames transmitted */ uint64_t tx_err; /* Total number of transmit errors */ uint64_t tx_tagged_frames; /* Total number of single VLAN tagged frames transmitted */ uint64_t tx_dbl_tagged_frames; /* Total number of double VLAN tagged frames transmitted */ uint64_t tx_runt_frames; /* Total number of runt frames transmitted */ uint64_t tx_fifo_underruns; /* Total number of TX FIFO under runs */ uint64_t tx_pfc_ena_frames_pri0; /* * Total number of PFC frames with PFC enabled bit for Pri 0 * transmitted */ uint64_t tx_pfc_ena_frames_pri1; /* * Total number of PFC frames with PFC enabled bit for Pri 1 * transmitted */ uint64_t tx_pfc_ena_frames_pri2; /* * Total number of PFC frames with PFC enabled bit for Pri 2 * transmitted */ uint64_t tx_pfc_ena_frames_pri3; /* * Total number of PFC frames with PFC enabled bit for Pri 3 * transmitted */ uint64_t tx_pfc_ena_frames_pri4; /* * Total number of PFC frames with PFC enabled bit for Pri 4 * transmitted */ uint64_t tx_pfc_ena_frames_pri5; /* * Total number of PFC frames with PFC enabled bit for Pri 5 * transmitted */ uint64_t tx_pfc_ena_frames_pri6; /* * Total number of PFC frames with PFC enabled bit for Pri 6 * transmitted */ uint64_t tx_pfc_ena_frames_pri7; /* * Total number of PFC frames with PFC enabled bit for Pri 7 * transmitted */ uint64_t tx_eee_lpi_events; /* Total number of EEE LPI Events on TX */ uint64_t tx_eee_lpi_duration; /* EEE LPI Duration Counter on TX */ uint64_t tx_llfc_logical_msgs; /* * Total number of Link Level Flow Control (LLFC) messages * transmitted */ uint64_t tx_hcfc_msgs; /* Total number of HCFC messages transmitted */ uint64_t tx_total_collisions; /* Total number of TX collisions */ uint64_t tx_bytes; /* Total number of transmitted bytes */ uint64_t tx_xthol_frames; /* Total number of end-to-end HOL frames */ uint64_t tx_stat_discard; /* Total Tx Drops per Port reported by STATS block */ uint64_t tx_stat_error; /* Total Tx Error Drops per Port reported by STATS block */ } __attribute__((packed)); /* Port Rx Statistics Formats (528 bytes) */ struct rx_port_stats { uint64_t rx_64b_frames; /* Total Number of 64 Bytes frames received */ uint64_t rx_65b_127b_frames; /* Total Number of 65-127 Bytes frames received */ uint64_t rx_128b_255b_frames; /* Total Number of 128-255 Bytes frames received */ uint64_t rx_256b_511b_frames; /* Total Number of 256-511 Bytes frames received */ uint64_t rx_512b_1023b_frames; /* Total Number of 512-1023 Bytes frames received */ uint64_t rx_1024b_1518_frames; /* Total Number of 1024-1518 Bytes frames received */ uint64_t rx_good_vlan_frames; /* * Total Number of each good VLAN (exludes FCS errors) frame * received which is 1519 to 1522 bytes in length inclusive * (excluding framing bits but including FCS bytes). */ uint64_t rx_1519b_2047b_frames; /* Total Number of 1519-2047 Bytes frames received */ uint64_t rx_2048b_4095b_frames; /* Total Number of 2048-4095 Bytes frames received */ uint64_t rx_4096b_9216b_frames; /* Total Number of 4096-9216 Bytes frames received */ uint64_t rx_9217b_16383b_frames; /* Total Number of 9217-16383 Bytes frames received */ uint64_t rx_total_frames; /* Total number of frames received */ uint64_t rx_ucast_frames; /* Total number of unicast frames received */ uint64_t rx_mcast_frames; /* Total number of multicast frames received */ uint64_t rx_bcast_frames; /* Total number of broadcast frames received */ uint64_t rx_fcs_err_frames; /* Total number of received frames with FCS error */ uint64_t rx_ctrl_frames; /* Total number of control frames received */ uint64_t rx_pause_frames; /* Total number of PAUSE frames received */ uint64_t rx_pfc_frames; /* Total number of PFC frames received */ uint64_t rx_unsupported_opcode_frames; /* Total number of frames received with an unsupported opcode */ uint64_t rx_unsupported_da_pausepfc_frames; /* * Total number of frames received with an unsupported DA for * pause and PFC */ uint64_t rx_wrong_sa_frames; /* Total number of frames received with an unsupported SA */ uint64_t rx_align_err_frames; /* Total number of received packets with alignment error */ uint64_t rx_oor_len_frames; /* Total number of received frames with out-of-range length */ uint64_t rx_code_err_frames; /* Total number of received frames with error termination */ uint64_t rx_false_carrier_frames; /* * Total number of received frames with a false carrier is * detected during idle, as defined by RX_ER samples active and * RXD is 0xE. The event is reported along with the statistics * generated on the next received frame. Only one false carrier * condition can be detected and logged between frames. Carrier * event, valid for 10M/100M speed modes only. */ uint64_t rx_ovrsz_frames; /* Total number of over-sized frames received */ uint64_t rx_jbr_frames; /* Total number of jabber packets received */ uint64_t rx_mtu_err_frames; /* Total number of received frames with MTU error */ uint64_t rx_match_crc_frames; /* Total number of received frames with CRC match */ uint64_t rx_promiscuous_frames; /* Total number of frames received promiscuously */ uint64_t rx_tagged_frames; /* Total number of received frames with one or two VLAN tags */ uint64_t rx_double_tagged_frames; /* Total number of received frames with two VLAN tags */ uint64_t rx_trunc_frames; /* Total number of truncated frames received */ uint64_t rx_good_frames; /* Total number of good frames (without errors) received */ uint64_t rx_pfc_xon2xoff_frames_pri0; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 0 */ uint64_t rx_pfc_xon2xoff_frames_pri1; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 1 */ uint64_t rx_pfc_xon2xoff_frames_pri2; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 2 */ uint64_t rx_pfc_xon2xoff_frames_pri3; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 3 */ uint64_t rx_pfc_xon2xoff_frames_pri4; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 4 */ uint64_t rx_pfc_xon2xoff_frames_pri5; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 5 */ uint64_t rx_pfc_xon2xoff_frames_pri6; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 6 */ uint64_t rx_pfc_xon2xoff_frames_pri7; /* * Total number of received PFC frames with transition from XON * to XOFF on Pri 7 */ uint64_t rx_pfc_ena_frames_pri0; /* * Total number of received PFC frames with PFC enabled bit for * Pri 0 */ uint64_t rx_pfc_ena_frames_pri1; /* * Total number of received PFC frames with PFC enabled bit for * Pri 1 */ uint64_t rx_pfc_ena_frames_pri2; /* * Total number of received PFC frames with PFC enabled bit for * Pri 2 */ uint64_t rx_pfc_ena_frames_pri3; /* * Total number of received PFC frames with PFC enabled bit for * Pri 3 */ uint64_t rx_pfc_ena_frames_pri4; /* * Total number of received PFC frames with PFC enabled bit for * Pri 4 */ uint64_t rx_pfc_ena_frames_pri5; /* * Total number of received PFC frames with PFC enabled bit for * Pri 5 */ uint64_t rx_pfc_ena_frames_pri6; /* * Total number of received PFC frames with PFC enabled bit for * Pri 6 */ uint64_t rx_pfc_ena_frames_pri7; /* * Total number of received PFC frames with PFC enabled bit for * Pri 7 */ uint64_t rx_sch_crc_err_frames; /* Total Number of frames received with SCH CRC error */ uint64_t rx_undrsz_frames; /* Total Number of under-sized frames received */ uint64_t rx_frag_frames; /* Total Number of fragmented frames received */ uint64_t rx_eee_lpi_events; /* Total number of RX EEE LPI Events */ uint64_t rx_eee_lpi_duration; /* EEE LPI Duration Counter on RX */ uint64_t rx_llfc_physical_msgs; /* * Total number of physical type Link Level Flow Control (LLFC) * messages received */ uint64_t rx_llfc_logical_msgs; /* * Total number of logical type Link Level Flow Control (LLFC) * messages received */ uint64_t rx_llfc_msgs_with_crc_err; /* * Total number of logical type Link Level Flow Control (LLFC) * messages received with CRC error */ uint64_t rx_hcfc_msgs; /* Total number of HCFC messages received */ uint64_t rx_hcfc_msgs_with_crc_err; /* Total number of HCFC messages received with CRC error */ uint64_t rx_bytes; /* Total number of received bytes */ uint64_t rx_runt_bytes; /* Total number of bytes received in runt frames */ uint64_t rx_runt_frames; /* Total number of runt frames received */ uint64_t rx_stat_discard; /* Total Rx Discards per Port reported by STATS block */ uint64_t rx_stat_err; /* Total Rx Error Drops per Port reported by STATS block */ } __attribute__((packed)); /* Periodic Statistics Context DMA to host (160 bytes) */ /* * per-context HW statistics -- chip view */ struct ctx_hw_stats64 { uint64_t rx_ucast_pkts; uint64_t rx_mcast_pkts; uint64_t rx_bcast_pkts; uint64_t rx_drop_pkts; uint64_t rx_discard_pkts; uint64_t rx_ucast_bytes; uint64_t rx_mcast_bytes; uint64_t rx_bcast_bytes; uint64_t tx_ucast_pkts; uint64_t tx_mcast_pkts; uint64_t tx_bcast_pkts; uint64_t tx_drop_pkts; uint64_t tx_discard_pkts; uint64_t tx_ucast_bytes; uint64_t tx_mcast_bytes; uint64_t tx_bcast_bytes; uint64_t tpa_pkts; uint64_t tpa_bytes; uint64_t tpa_events; uint64_t tpa_aborts; } __attribute__((packed)); #endif /* _HSI_STRUCT_DEF_DPDK_ */