/* SPDX-License-Identifier: BSD-3-Clause * Copyright 2015 6WIND S.A. * Copyright 2015 Mellanox Technologies, Ltd */ #include #include #include #include #include #include "mlx5.h" #include "mlx5_rxtx.h" #include "mlx5_utils.h" /** * Stop traffic on Tx queues. * * @param dev * Pointer to Ethernet device structure. */ static void mlx5_txq_stop(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; unsigned int i; for (i = 0; i != priv->txqs_n; ++i) mlx5_txq_release(dev, i); } /** * Start traffic on Tx queues. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_txq_start(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; unsigned int i; int ret; for (i = 0; i != priv->txqs_n; ++i) { struct mlx5_txq_ctrl *txq_ctrl = mlx5_txq_get(dev, i); if (!txq_ctrl) continue; if (txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN) { txq_ctrl->obj = mlx5_txq_obj_new (dev, i, MLX5_TXQ_OBJ_TYPE_DEVX_HAIRPIN); } else { txq_alloc_elts(txq_ctrl); txq_ctrl->obj = mlx5_txq_obj_new (dev, i, MLX5_TXQ_OBJ_TYPE_IBV); } if (!txq_ctrl->obj) { rte_errno = ENOMEM; goto error; } } return 0; error: ret = rte_errno; /* Save rte_errno before cleanup. */ do { mlx5_txq_release(dev, i); } while (i-- != 0); rte_errno = ret; /* Restore rte_errno. */ return -rte_errno; } /** * Stop traffic on Rx queues. * * @param dev * Pointer to Ethernet device structure. */ static void mlx5_rxq_stop(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; unsigned int i; for (i = 0; i != priv->rxqs_n; ++i) mlx5_rxq_release(dev, i); } /** * Start traffic on Rx queues. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_rxq_start(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; unsigned int i; int ret = 0; enum mlx5_rxq_obj_type obj_type = MLX5_RXQ_OBJ_TYPE_IBV; for (i = 0; i < priv->rxqs_n; ++i) { if ((*priv->rxqs)[i]->lro) { obj_type = MLX5_RXQ_OBJ_TYPE_DEVX_RQ; break; } } /* Allocate/reuse/resize mempool for Multi-Packet RQ. */ if (mlx5_mprq_alloc_mp(dev)) { /* Should not release Rx queues but return immediately. */ return -rte_errno; } for (i = 0; i != priv->rxqs_n; ++i) { struct mlx5_rxq_ctrl *rxq_ctrl = mlx5_rxq_get(dev, i); struct rte_mempool *mp; if (!rxq_ctrl) continue; if (rxq_ctrl->type == MLX5_RXQ_TYPE_HAIRPIN) { rxq_ctrl->obj = mlx5_rxq_obj_new (dev, i, MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN); if (!rxq_ctrl->obj) goto error; continue; } /* Pre-register Rx mempool. */ mp = mlx5_rxq_mprq_enabled(&rxq_ctrl->rxq) ? rxq_ctrl->rxq.mprq_mp : rxq_ctrl->rxq.mp; DRV_LOG(DEBUG, "port %u Rx queue %u registering" " mp %s having %u chunks", dev->data->port_id, rxq_ctrl->rxq.idx, mp->name, mp->nb_mem_chunks); mlx5_mr_update_mp(dev, &rxq_ctrl->rxq.mr_ctrl, mp); ret = rxq_alloc_elts(rxq_ctrl); if (ret) goto error; rxq_ctrl->obj = mlx5_rxq_obj_new(dev, i, obj_type); if (!rxq_ctrl->obj) goto error; if (obj_type == MLX5_RXQ_OBJ_TYPE_IBV) rxq_ctrl->wqn = rxq_ctrl->obj->wq->wq_num; else if (obj_type == MLX5_RXQ_OBJ_TYPE_DEVX_RQ) rxq_ctrl->wqn = rxq_ctrl->obj->rq->id; } return 0; error: ret = rte_errno; /* Save rte_errno before cleanup. */ do { mlx5_rxq_release(dev, i); } while (i-- != 0); rte_errno = ret; /* Restore rte_errno. */ return -rte_errno; } /** * Binds Tx queues to Rx queues for hairpin. * * Binds Tx queues to the target Rx queues. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx5_hairpin_bind(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; struct mlx5_devx_modify_sq_attr sq_attr = { 0 }; struct mlx5_devx_modify_rq_attr rq_attr = { 0 }; struct mlx5_txq_ctrl *txq_ctrl; struct mlx5_rxq_ctrl *rxq_ctrl; struct mlx5_devx_obj *sq; struct mlx5_devx_obj *rq; unsigned int i; int ret = 0; for (i = 0; i != priv->txqs_n; ++i) { txq_ctrl = mlx5_txq_get(dev, i); if (!txq_ctrl) continue; if (txq_ctrl->type != MLX5_TXQ_TYPE_HAIRPIN) { mlx5_txq_release(dev, i); continue; } if (!txq_ctrl->obj) { rte_errno = ENOMEM; DRV_LOG(ERR, "port %u no txq object found: %d", dev->data->port_id, i); mlx5_txq_release(dev, i); return -rte_errno; } sq = txq_ctrl->obj->sq; rxq_ctrl = mlx5_rxq_get(dev, txq_ctrl->hairpin_conf.peers[0].queue); if (!rxq_ctrl) { mlx5_txq_release(dev, i); rte_errno = EINVAL; DRV_LOG(ERR, "port %u no rxq object found: %d", dev->data->port_id, txq_ctrl->hairpin_conf.peers[0].queue); return -rte_errno; } if (rxq_ctrl->type != MLX5_RXQ_TYPE_HAIRPIN || rxq_ctrl->hairpin_conf.peers[0].queue != i) { rte_errno = ENOMEM; DRV_LOG(ERR, "port %u Tx queue %d can't be binded to " "Rx queue %d", dev->data->port_id, i, txq_ctrl->hairpin_conf.peers[0].queue); goto error; } rq = rxq_ctrl->obj->rq; if (!rq) { rte_errno = ENOMEM; DRV_LOG(ERR, "port %u hairpin no matching rxq: %d", dev->data->port_id, txq_ctrl->hairpin_conf.peers[0].queue); goto error; } sq_attr.state = MLX5_SQC_STATE_RDY; sq_attr.sq_state = MLX5_SQC_STATE_RST; sq_attr.hairpin_peer_rq = rq->id; sq_attr.hairpin_peer_vhca = priv->config.hca_attr.vhca_id; ret = mlx5_devx_cmd_modify_sq(sq, &sq_attr); if (ret) goto error; rq_attr.state = MLX5_SQC_STATE_RDY; rq_attr.rq_state = MLX5_SQC_STATE_RST; rq_attr.hairpin_peer_sq = sq->id; rq_attr.hairpin_peer_vhca = priv->config.hca_attr.vhca_id; ret = mlx5_devx_cmd_modify_rq(rq, &rq_attr); if (ret) goto error; mlx5_txq_release(dev, i); mlx5_rxq_release(dev, txq_ctrl->hairpin_conf.peers[0].queue); } return 0; error: mlx5_txq_release(dev, i); mlx5_rxq_release(dev, txq_ctrl->hairpin_conf.peers[0].queue); return -rte_errno; } /** * DPDK callback to start the device. * * Simulate device start by attaching all configured flows. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx5_dev_start(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; int ret; DRV_LOG(DEBUG, "port %u starting device", dev->data->port_id); ret = mlx5_dev_configure_rss_reta(dev); if (ret) { DRV_LOG(ERR, "port %u reta config failed: %s", dev->data->port_id, strerror(rte_errno)); return -rte_errno; } ret = mlx5_txq_start(dev); if (ret) { DRV_LOG(ERR, "port %u Tx queue allocation failed: %s", dev->data->port_id, strerror(rte_errno)); return -rte_errno; } ret = mlx5_rxq_start(dev); if (ret) { DRV_LOG(ERR, "port %u Rx queue allocation failed: %s", dev->data->port_id, strerror(rte_errno)); mlx5_txq_stop(dev); return -rte_errno; } ret = mlx5_hairpin_bind(dev); if (ret) { DRV_LOG(ERR, "port %u hairpin binding failed: %s", dev->data->port_id, strerror(rte_errno)); mlx5_txq_stop(dev); return -rte_errno; } dev->data->dev_started = 1; ret = mlx5_rx_intr_vec_enable(dev); if (ret) { DRV_LOG(ERR, "port %u Rx interrupt vector creation failed", dev->data->port_id); goto error; } mlx5_stats_init(dev); ret = mlx5_traffic_enable(dev); if (ret) { DRV_LOG(DEBUG, "port %u failed to set defaults flows", dev->data->port_id); goto error; } ret = mlx5_flow_start(dev, &priv->flows); if (ret) { DRV_LOG(DEBUG, "port %u failed to set flows", dev->data->port_id); goto error; } rte_wmb(); dev->tx_pkt_burst = mlx5_select_tx_function(dev); dev->rx_pkt_burst = mlx5_select_rx_function(dev); /* Enable datapath on secondary process. */ mlx5_mp_req_start_rxtx(dev); mlx5_dev_interrupt_handler_install(dev); return 0; error: ret = rte_errno; /* Save rte_errno before cleanup. */ /* Rollback. */ dev->data->dev_started = 0; mlx5_flow_stop(dev, &priv->flows); mlx5_traffic_disable(dev); mlx5_txq_stop(dev); mlx5_rxq_stop(dev); rte_errno = ret; /* Restore rte_errno. */ return -rte_errno; } /** * DPDK callback to stop the device. * * Simulate device stop by detaching all configured flows. * * @param dev * Pointer to Ethernet device structure. */ void mlx5_dev_stop(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; dev->data->dev_started = 0; /* Prevent crashes when queues are still in use. */ dev->rx_pkt_burst = removed_rx_burst; dev->tx_pkt_burst = removed_tx_burst; rte_wmb(); /* Disable datapath on secondary process. */ mlx5_mp_req_stop_rxtx(dev); usleep(1000 * priv->rxqs_n); DRV_LOG(DEBUG, "port %u stopping device", dev->data->port_id); mlx5_flow_stop(dev, &priv->flows); mlx5_traffic_disable(dev); mlx5_rx_intr_vec_disable(dev); mlx5_dev_interrupt_handler_uninstall(dev); mlx5_txq_stop(dev); mlx5_rxq_stop(dev); } /** * Enable traffic flows configured by control plane * * @param dev * Pointer to Ethernet device private data. * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx5_traffic_enable(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; struct rte_flow_item_eth bcast = { .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff", }; struct rte_flow_item_eth ipv6_multi_spec = { .dst.addr_bytes = "\x33\x33\x00\x00\x00\x00", }; struct rte_flow_item_eth ipv6_multi_mask = { .dst.addr_bytes = "\xff\xff\x00\x00\x00\x00", }; struct rte_flow_item_eth unicast = { .src.addr_bytes = "\x00\x00\x00\x00\x00\x00", }; struct rte_flow_item_eth unicast_mask = { .dst.addr_bytes = "\xff\xff\xff\xff\xff\xff", }; const unsigned int vlan_filter_n = priv->vlan_filter_n; const struct rte_ether_addr cmp = { .addr_bytes = "\x00\x00\x00\x00\x00\x00", }; unsigned int i; unsigned int j; int ret; if (priv->config.dv_esw_en && !priv->config.vf) if (!mlx5_flow_create_esw_table_zero_flow(dev)) goto error; if (priv->isolated) return 0; if (dev->data->promiscuous) { struct rte_flow_item_eth promisc = { .dst.addr_bytes = "\x00\x00\x00\x00\x00\x00", .src.addr_bytes = "\x00\x00\x00\x00\x00\x00", .type = 0, }; ret = mlx5_ctrl_flow(dev, &promisc, &promisc); if (ret) goto error; } if (dev->data->all_multicast) { struct rte_flow_item_eth multicast = { .dst.addr_bytes = "\x01\x00\x00\x00\x00\x00", .src.addr_bytes = "\x00\x00\x00\x00\x00\x00", .type = 0, }; ret = mlx5_ctrl_flow(dev, &multicast, &multicast); if (ret) goto error; } else { /* Add broadcast/multicast flows. */ for (i = 0; i != vlan_filter_n; ++i) { uint16_t vlan = priv->vlan_filter[i]; struct rte_flow_item_vlan vlan_spec = { .tci = rte_cpu_to_be_16(vlan), }; struct rte_flow_item_vlan vlan_mask = rte_flow_item_vlan_mask; ret = mlx5_ctrl_flow_vlan(dev, &bcast, &bcast, &vlan_spec, &vlan_mask); if (ret) goto error; ret = mlx5_ctrl_flow_vlan(dev, &ipv6_multi_spec, &ipv6_multi_mask, &vlan_spec, &vlan_mask); if (ret) goto error; } if (!vlan_filter_n) { ret = mlx5_ctrl_flow(dev, &bcast, &bcast); if (ret) goto error; ret = mlx5_ctrl_flow(dev, &ipv6_multi_spec, &ipv6_multi_mask); if (ret) goto error; } } /* Add MAC address flows. */ for (i = 0; i != MLX5_MAX_MAC_ADDRESSES; ++i) { struct rte_ether_addr *mac = &dev->data->mac_addrs[i]; if (!memcmp(mac, &cmp, sizeof(*mac))) continue; memcpy(&unicast.dst.addr_bytes, mac->addr_bytes, RTE_ETHER_ADDR_LEN); for (j = 0; j != vlan_filter_n; ++j) { uint16_t vlan = priv->vlan_filter[j]; struct rte_flow_item_vlan vlan_spec = { .tci = rte_cpu_to_be_16(vlan), }; struct rte_flow_item_vlan vlan_mask = rte_flow_item_vlan_mask; ret = mlx5_ctrl_flow_vlan(dev, &unicast, &unicast_mask, &vlan_spec, &vlan_mask); if (ret) goto error; } if (!vlan_filter_n) { ret = mlx5_ctrl_flow(dev, &unicast, &unicast_mask); if (ret) goto error; } } return 0; error: ret = rte_errno; /* Save rte_errno before cleanup. */ mlx5_flow_list_flush(dev, &priv->ctrl_flows); rte_errno = ret; /* Restore rte_errno. */ return -rte_errno; } /** * Disable traffic flows configured by control plane * * @param dev * Pointer to Ethernet device private data. */ void mlx5_traffic_disable(struct rte_eth_dev *dev) { struct mlx5_priv *priv = dev->data->dev_private; mlx5_flow_list_flush(dev, &priv->ctrl_flows); } /** * Restart traffic flows configured by control plane * * @param dev * Pointer to Ethernet device private data. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx5_traffic_restart(struct rte_eth_dev *dev) { if (dev->data->dev_started) { mlx5_traffic_disable(dev); return mlx5_traffic_enable(dev); } return 0; }