/* SPDX-License-Identifier: BSD-3-Clause * Copyright 2017 6WIND S.A. * Copyright 2017 Mellanox Technologies, Ltd */ /** * @file * Miscellaneous control operations for mlx4 driver. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Verbs headers do not support -pedantic. */ #ifdef PEDANTIC #pragma GCC diagnostic ignored "-Wpedantic" #endif #include #ifdef PEDANTIC #pragma GCC diagnostic error "-Wpedantic" #endif #include #include #include #include #include #include #include #include "mlx4.h" #include "mlx4_flow.h" #include "mlx4_glue.h" #include "mlx4_rxtx.h" #include "mlx4_utils.h" /** * Get interface name from private structure. * * @param[in] priv * Pointer to private structure. * @param[out] ifname * Interface name output buffer. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_get_ifname(const struct mlx4_priv *priv, char (*ifname)[IF_NAMESIZE]) { DIR *dir; struct dirent *dent; unsigned int dev_type = 0; unsigned int dev_port_prev = ~0u; char match[IF_NAMESIZE] = ""; { MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path); dir = opendir(path); if (dir == NULL) { rte_errno = errno; return -rte_errno; } } while ((dent = readdir(dir)) != NULL) { char *name = dent->d_name; FILE *file; unsigned int dev_port; int r; if ((name[0] == '.') && ((name[1] == '\0') || ((name[1] == '.') && (name[2] == '\0')))) continue; MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path, name, (dev_type ? "dev_id" : "dev_port")); file = fopen(path, "rb"); if (file == NULL) { if (errno != ENOENT) continue; /* * Switch to dev_id when dev_port does not exist as * is the case with Linux kernel versions < 3.15. */ try_dev_id: match[0] = '\0'; if (dev_type) break; dev_type = 1; dev_port_prev = ~0u; rewinddir(dir); continue; } r = fscanf(file, (dev_type ? "%x" : "%u"), &dev_port); fclose(file); if (r != 1) continue; /* * Switch to dev_id when dev_port returns the same value for * all ports. May happen when using a MOFED release older than * 3.0 with a Linux kernel >= 3.15. */ if (dev_port == dev_port_prev) goto try_dev_id; dev_port_prev = dev_port; if (dev_port == (priv->port - 1u)) strlcpy(match, name, sizeof(match)); } closedir(dir); if (match[0] == '\0') { rte_errno = ENODEV; return -rte_errno; } strncpy(*ifname, match, sizeof(*ifname)); return 0; } /** * Perform ifreq ioctl() on associated Ethernet device. * * @param[in] priv * Pointer to private structure. * @param req * Request number to pass to ioctl(). * @param[out] ifr * Interface request structure output buffer. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ static int mlx4_ifreq(const struct mlx4_priv *priv, int req, struct ifreq *ifr) { int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP); int ret; if (sock == -1) { rte_errno = errno; return -rte_errno; } ret = mlx4_get_ifname(priv, &ifr->ifr_name); if (!ret && ioctl(sock, req, ifr) == -1) { rte_errno = errno; ret = -rte_errno; } close(sock); return ret; } /** * Get MAC address by querying netdevice. * * @param[in] priv * Pointer to private structure. * @param[out] mac * MAC address output buffer. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_get_mac(struct mlx4_priv *priv, uint8_t (*mac)[RTE_ETHER_ADDR_LEN]) { struct ifreq request; int ret = mlx4_ifreq(priv, SIOCGIFHWADDR, &request); if (ret) return ret; memcpy(mac, request.ifr_hwaddr.sa_data, RTE_ETHER_ADDR_LEN); return 0; } /** * Get device MTU. * * @param priv * Pointer to private structure. * @param[out] mtu * MTU value output buffer. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_mtu_get(struct mlx4_priv *priv, uint16_t *mtu) { struct ifreq request; int ret = mlx4_ifreq(priv, SIOCGIFMTU, &request); if (ret) return ret; *mtu = request.ifr_mtu; return 0; } /** * DPDK callback to change the MTU. * * @param priv * Pointer to Ethernet device structure. * @param mtu * MTU value to set. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_mtu_set(struct rte_eth_dev *dev, uint16_t mtu) { struct mlx4_priv *priv = dev->data->dev_private; struct ifreq request = { .ifr_mtu = mtu, }; int ret = mlx4_ifreq(priv, SIOCSIFMTU, &request); if (ret) return ret; priv->mtu = mtu; return 0; } /** * Set device flags. * * @param priv * Pointer to private structure. * @param keep * Bitmask for flags that must remain untouched. * @param flags * Bitmask for flags to modify. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ static int mlx4_set_flags(struct mlx4_priv *priv, unsigned int keep, unsigned int flags) { struct ifreq request; int ret = mlx4_ifreq(priv, SIOCGIFFLAGS, &request); if (ret) return ret; request.ifr_flags &= keep; request.ifr_flags |= flags & ~keep; return mlx4_ifreq(priv, SIOCSIFFLAGS, &request); } /** * Change the link state (UP / DOWN). * * @param priv * Pointer to Ethernet device private data. * @param up * Nonzero for link up, otherwise link down. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ static int mlx4_dev_set_link(struct mlx4_priv *priv, int up) { int err; if (up) { err = mlx4_set_flags(priv, ~IFF_UP, IFF_UP); if (err) return err; } else { err = mlx4_set_flags(priv, ~IFF_UP, ~IFF_UP); if (err) return err; } return 0; } /** * DPDK callback to bring the link DOWN. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_dev_set_link_down(struct rte_eth_dev *dev) { struct mlx4_priv *priv = dev->data->dev_private; return mlx4_dev_set_link(priv, 0); } /** * DPDK callback to bring the link UP. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_dev_set_link_up(struct rte_eth_dev *dev) { struct mlx4_priv *priv = dev->data->dev_private; return mlx4_dev_set_link(priv, 1); } /** * Supported Rx mode toggles. * * Even and odd values respectively stand for off and on. */ enum rxmode_toggle { RXMODE_TOGGLE_PROMISC_OFF, RXMODE_TOGGLE_PROMISC_ON, RXMODE_TOGGLE_ALLMULTI_OFF, RXMODE_TOGGLE_ALLMULTI_ON, }; /** * Helper function to toggle promiscuous and all multicast modes. * * @param dev * Pointer to Ethernet device structure. * @param toggle * Toggle to set. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ static int mlx4_rxmode_toggle(struct rte_eth_dev *dev, enum rxmode_toggle toggle) { struct mlx4_priv *priv = dev->data->dev_private; const char *mode; struct rte_flow_error error; int ret; switch (toggle) { case RXMODE_TOGGLE_PROMISC_OFF: case RXMODE_TOGGLE_PROMISC_ON: mode = "promiscuous"; dev->data->promiscuous = toggle & 1; break; case RXMODE_TOGGLE_ALLMULTI_OFF: case RXMODE_TOGGLE_ALLMULTI_ON: mode = "all multicast"; dev->data->all_multicast = toggle & 1; break; default: mode = "undefined"; } ret = mlx4_flow_sync(priv, &error); if (!ret) return 0; ERROR("cannot toggle %s mode (code %d, \"%s\")," " flow error type %d, cause %p, message: %s", mode, rte_errno, strerror(rte_errno), error.type, error.cause, error.message ? error.message : "(unspecified)"); return ret; } /** * DPDK callback to enable promiscuous mode. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx4_promiscuous_enable(struct rte_eth_dev *dev) { return mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_PROMISC_ON); } /** * DPDK callback to disable promiscuous mode. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx4_promiscuous_disable(struct rte_eth_dev *dev) { return mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_PROMISC_OFF); } /** * DPDK callback to enable all multicast mode. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx4_allmulticast_enable(struct rte_eth_dev *dev) { return mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_ALLMULTI_ON); } /** * DPDK callback to disable all multicast mode. * * @param dev * Pointer to Ethernet device structure. * * @return * 0 on success, a negative errno value otherwise and rte_errno is set. */ int mlx4_allmulticast_disable(struct rte_eth_dev *dev) { return mlx4_rxmode_toggle(dev, RXMODE_TOGGLE_ALLMULTI_OFF); } /** * DPDK callback to remove a MAC address. * * @param dev * Pointer to Ethernet device structure. * @param index * MAC address index. */ void mlx4_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index) { struct mlx4_priv *priv = dev->data->dev_private; struct rte_flow_error error; if (index >= RTE_DIM(priv->mac) - priv->mac_mc) { rte_errno = EINVAL; return; } memset(&priv->mac[index], 0, sizeof(priv->mac[index])); if (!mlx4_flow_sync(priv, &error)) return; ERROR("failed to synchronize flow rules after removing MAC address" " at index %d (code %d, \"%s\")," " flow error type %d, cause %p, message: %s", index, rte_errno, strerror(rte_errno), error.type, error.cause, error.message ? error.message : "(unspecified)"); } /** * DPDK callback to add a MAC address. * * @param dev * Pointer to Ethernet device structure. * @param mac_addr * MAC address to register. * @param index * MAC address index. * @param vmdq * VMDq pool index to associate address with (ignored). * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr, uint32_t index, uint32_t vmdq) { struct mlx4_priv *priv = dev->data->dev_private; struct rte_flow_error error; int ret; (void)vmdq; if (index >= RTE_DIM(priv->mac) - priv->mac_mc) { rte_errno = EINVAL; return -rte_errno; } memcpy(&priv->mac[index], mac_addr, sizeof(priv->mac[index])); ret = mlx4_flow_sync(priv, &error); if (!ret) return 0; ERROR("failed to synchronize flow rules after adding MAC address" " at index %d (code %d, \"%s\")," " flow error type %d, cause %p, message: %s", index, rte_errno, strerror(rte_errno), error.type, error.cause, error.message ? error.message : "(unspecified)"); return ret; } /** * DPDK callback to configure multicast addresses. * * @param dev * Pointer to Ethernet device structure. * @param list * List of MAC addresses to register. * @param num * Number of entries in list. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_set_mc_addr_list(struct rte_eth_dev *dev, struct rte_ether_addr *list, uint32_t num) { struct mlx4_priv *priv = dev->data->dev_private; struct rte_flow_error error; int ret; if (num > RTE_DIM(priv->mac)) { rte_errno = EINVAL; return -rte_errno; } /* * Make sure there is enough room to increase the number of * multicast entries without overwriting standard entries. */ if (num > priv->mac_mc) { unsigned int i; for (i = RTE_DIM(priv->mac) - num; i != RTE_DIM(priv->mac) - priv->mac_mc; ++i) if (!rte_is_zero_ether_addr(&priv->mac[i])) { rte_errno = EBUSY; return -rte_errno; } } else if (num < priv->mac_mc) { /* Clear unused entries. */ memset(priv->mac + RTE_DIM(priv->mac) - priv->mac_mc, 0, sizeof(priv->mac[0]) * (priv->mac_mc - num)); } memcpy(priv->mac + RTE_DIM(priv->mac) - num, list, sizeof(*list) * num); priv->mac_mc = num; ret = mlx4_flow_sync(priv, &error); if (!ret) return 0; ERROR("failed to synchronize flow rules after modifying MC list," " (code %d, \"%s\"), flow error type %d, cause %p, message: %s", rte_errno, strerror(rte_errno), error.type, error.cause, error.message ? error.message : "(unspecified)"); return ret; } /** * DPDK callback to configure a VLAN filter. * * @param dev * Pointer to Ethernet device structure. * @param vlan_id * VLAN ID to filter. * @param on * Toggle filter. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on) { struct mlx4_priv *priv = dev->data->dev_private; struct rte_flow_error error; unsigned int vidx = vlan_id / 64; unsigned int vbit = vlan_id % 64; uint64_t *v; int ret; if (vidx >= RTE_DIM(dev->data->vlan_filter_conf.ids)) { rte_errno = EINVAL; return -rte_errno; } v = &dev->data->vlan_filter_conf.ids[vidx]; *v &= ~(UINT64_C(1) << vbit); *v |= (uint64_t)!!on << vbit; ret = mlx4_flow_sync(priv, &error); if (!ret) return 0; ERROR("failed to synchronize flow rules after %s VLAN filter on ID %u" " (code %d, \"%s\"), " " flow error type %d, cause %p, message: %s", on ? "enabling" : "disabling", vlan_id, rte_errno, strerror(rte_errno), error.type, error.cause, error.message ? error.message : "(unspecified)"); return ret; } /** * DPDK callback to set the primary MAC address. * * @param dev * Pointer to Ethernet device structure. * @param mac_addr * MAC address to register. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_mac_addr_set(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr) { return mlx4_mac_addr_add(dev, mac_addr, 0, 0); } /** * DPDK callback to get information about the device. * * @param dev * Pointer to Ethernet device structure. * @param[out] info * Info structure output buffer. */ int mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info) { struct mlx4_priv *priv = dev->data->dev_private; unsigned int max; /* FIXME: we should ask the device for these values. */ info->min_rx_bufsize = 32; info->max_rx_pktlen = 65536; /* * Since we need one CQ per QP, the limit is the minimum number * between the two values. */ max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ? priv->device_attr.max_qp : priv->device_attr.max_cq); /* max_rx_queues is uint16_t. */ max = RTE_MIN(max, (unsigned int)UINT16_MAX); info->max_rx_queues = max; info->max_tx_queues = max; info->max_mac_addrs = RTE_DIM(priv->mac); info->tx_offload_capa = mlx4_get_tx_port_offloads(priv); info->rx_queue_offload_capa = mlx4_get_rx_queue_offloads(priv); info->rx_offload_capa = (mlx4_get_rx_port_offloads(priv) | info->rx_queue_offload_capa); info->if_index = priv->if_index; info->hash_key_size = MLX4_RSS_HASH_KEY_SIZE; info->speed_capa = RTE_ETH_LINK_SPEED_1G | RTE_ETH_LINK_SPEED_10G | RTE_ETH_LINK_SPEED_20G | RTE_ETH_LINK_SPEED_40G | RTE_ETH_LINK_SPEED_56G; info->flow_type_rss_offloads = mlx4_conv_rss_types(priv, 0, 1); return 0; } /** * Get firmware version of a device. * * @param dev * Ethernet device port. * @param fw_ver * String output allocated by caller. * @param fw_size * Size of the output string, including terminating null byte. * * @return * 0 on success, or the size of the non truncated string if too big. */ int mlx4_fw_version_get(struct rte_eth_dev *dev, char *fw_ver, size_t fw_size) { struct mlx4_priv *priv = dev->data->dev_private; struct ibv_device_attr *attr = &priv->device_attr; size_t size = strnlen(attr->fw_ver, sizeof(attr->fw_ver)) + 1; if (fw_size < size) return size; if (fw_ver != NULL) strlcpy(fw_ver, attr->fw_ver, fw_size); return 0; } /** * DPDK callback to get device statistics. * * @param dev * Pointer to Ethernet device structure. * @param[out] stats * Stats structure output buffer. */ int mlx4_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats) { struct rte_eth_stats tmp; unsigned int i; unsigned int idx; memset(&tmp, 0, sizeof(tmp)); /* Add software counters. */ for (i = 0; i != dev->data->nb_rx_queues; ++i) { struct rxq *rxq = dev->data->rx_queues[i]; if (rxq == NULL) continue; idx = rxq->stats.idx; if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) { tmp.q_ipackets[idx] += rxq->stats.ipackets; tmp.q_ibytes[idx] += rxq->stats.ibytes; tmp.q_errors[idx] += (rxq->stats.idropped + rxq->stats.rx_nombuf); } tmp.ipackets += rxq->stats.ipackets; tmp.ibytes += rxq->stats.ibytes; tmp.ierrors += rxq->stats.idropped; tmp.rx_nombuf += rxq->stats.rx_nombuf; } for (i = 0; i != dev->data->nb_tx_queues; ++i) { struct txq *txq = dev->data->tx_queues[i]; if (txq == NULL) continue; idx = txq->stats.idx; if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) { tmp.q_opackets[idx] += txq->stats.opackets; tmp.q_obytes[idx] += txq->stats.obytes; } tmp.opackets += txq->stats.opackets; tmp.obytes += txq->stats.obytes; tmp.oerrors += txq->stats.odropped; } *stats = tmp; return 0; } /** * DPDK callback to clear device statistics. * * @param dev * Pointer to Ethernet device structure. * * @return * always 0 on success */ int mlx4_stats_reset(struct rte_eth_dev *dev) { unsigned int i; for (i = 0; i != dev->data->nb_rx_queues; ++i) { struct rxq *rxq = dev->data->rx_queues[i]; if (rxq) rxq->stats = (struct mlx4_rxq_stats){ .idx = rxq->stats.idx, }; } for (i = 0; i != dev->data->nb_tx_queues; ++i) { struct txq *txq = dev->data->tx_queues[i]; if (txq) txq->stats = (struct mlx4_txq_stats){ .idx = txq->stats.idx, }; } return 0; } /** * DPDK callback to retrieve physical link information. * * @param dev * Pointer to Ethernet device structure. * @param wait_to_complete * Wait for request completion (ignored). * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_link_update(struct rte_eth_dev *dev, int wait_to_complete) { const struct mlx4_priv *priv = dev->data->dev_private; struct ethtool_cmd edata = { .cmd = ETHTOOL_GSET, }; struct ifreq ifr; struct rte_eth_link dev_link; int link_speed = 0; if (priv == NULL) { rte_errno = EINVAL; return -rte_errno; } (void)wait_to_complete; if (mlx4_ifreq(priv, SIOCGIFFLAGS, &ifr)) { WARN("ioctl(SIOCGIFFLAGS) failed: %s", strerror(rte_errno)); return -rte_errno; } memset(&dev_link, 0, sizeof(dev_link)); dev_link.link_status = ((ifr.ifr_flags & IFF_UP) && (ifr.ifr_flags & IFF_RUNNING)); ifr.ifr_data = (void *)&edata; if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) { WARN("ioctl(SIOCETHTOOL, ETHTOOL_GSET) failed: %s", strerror(rte_errno)); return -rte_errno; } link_speed = ethtool_cmd_speed(&edata); if (link_speed == -1) dev_link.link_speed = RTE_ETH_SPEED_NUM_NONE; else dev_link.link_speed = link_speed; dev_link.link_duplex = ((edata.duplex == DUPLEX_HALF) ? RTE_ETH_LINK_HALF_DUPLEX : RTE_ETH_LINK_FULL_DUPLEX); dev_link.link_autoneg = !(dev->data->dev_conf.link_speeds & RTE_ETH_LINK_SPEED_FIXED); dev->data->dev_link = dev_link; return 0; } /** * DPDK callback to get flow control status. * * @param dev * Pointer to Ethernet device structure. * @param[out] fc_conf * Flow control output buffer. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) { struct mlx4_priv *priv = dev->data->dev_private; struct ifreq ifr; struct ethtool_pauseparam ethpause = { .cmd = ETHTOOL_GPAUSEPARAM, }; int ret; ifr.ifr_data = (void *)ðpause; if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) { ret = rte_errno; WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)" " failed: %s", strerror(rte_errno)); goto out; } fc_conf->autoneg = ethpause.autoneg; if (ethpause.rx_pause && ethpause.tx_pause) fc_conf->mode = RTE_ETH_FC_FULL; else if (ethpause.rx_pause) fc_conf->mode = RTE_ETH_FC_RX_PAUSE; else if (ethpause.tx_pause) fc_conf->mode = RTE_ETH_FC_TX_PAUSE; else fc_conf->mode = RTE_ETH_FC_NONE; ret = 0; out: MLX4_ASSERT(ret >= 0); return -ret; } /** * DPDK callback to modify flow control parameters. * * @param dev * Pointer to Ethernet device structure. * @param[in] fc_conf * Flow control parameters. * * @return * 0 on success, negative errno value otherwise and rte_errno is set. */ int mlx4_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) { struct mlx4_priv *priv = dev->data->dev_private; struct ifreq ifr; struct ethtool_pauseparam ethpause = { .cmd = ETHTOOL_SPAUSEPARAM, }; int ret; ifr.ifr_data = (void *)ðpause; ethpause.autoneg = fc_conf->autoneg; if (((fc_conf->mode & RTE_ETH_FC_FULL) == RTE_ETH_FC_FULL) || (fc_conf->mode & RTE_ETH_FC_RX_PAUSE)) ethpause.rx_pause = 1; else ethpause.rx_pause = 0; if (((fc_conf->mode & RTE_ETH_FC_FULL) == RTE_ETH_FC_FULL) || (fc_conf->mode & RTE_ETH_FC_TX_PAUSE)) ethpause.tx_pause = 1; else ethpause.tx_pause = 0; if (mlx4_ifreq(priv, SIOCETHTOOL, &ifr)) { ret = rte_errno; WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)" " failed: %s", strerror(rte_errno)); goto out; } ret = 0; out: MLX4_ASSERT(ret >= 0); return -ret; } /** * DPDK callback to retrieve the received packet types that are recognized * by the device. * * @param dev * Pointer to Ethernet device structure. * * @return * Pointer to an array of recognized packet types if in Rx burst mode, * NULL otherwise. */ const uint32_t * mlx4_dev_supported_ptypes_get(struct rte_eth_dev *dev) { static const uint32_t ptypes[] = { /* refers to rxq_cq_to_pkt_type() */ RTE_PTYPE_L2_ETHER, RTE_PTYPE_L3_IPV4_EXT_UNKNOWN, RTE_PTYPE_L3_IPV6_EXT_UNKNOWN, RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_UNKNOWN }; static const uint32_t ptypes_l2tun[] = { /* refers to rxq_cq_to_pkt_type() */ RTE_PTYPE_L2_ETHER, RTE_PTYPE_L3_IPV4_EXT_UNKNOWN, RTE_PTYPE_L3_IPV6_EXT_UNKNOWN, RTE_PTYPE_L4_FRAG, RTE_PTYPE_L4_TCP, RTE_PTYPE_L4_UDP, RTE_PTYPE_INNER_L3_IPV4_EXT_UNKNOWN, RTE_PTYPE_INNER_L3_IPV6_EXT_UNKNOWN, RTE_PTYPE_UNKNOWN }; struct mlx4_priv *priv = dev->data->dev_private; if (dev->rx_pkt_burst == mlx4_rx_burst) { if (priv->hw_csum_l2tun) return ptypes_l2tun; else return ptypes; } return NULL; } /** * Check if mlx4 device was removed. * * @param dev * Pointer to Ethernet device structure. * * @return * 1 when device is removed, otherwise 0. */ int mlx4_is_removed(struct rte_eth_dev *dev) { struct ibv_device_attr device_attr; struct mlx4_priv *priv = dev->data->dev_private; if (mlx4_glue->query_device(priv->ctx, &device_attr) == EIO) return 1; return 0; }