/* SPDX-License-Identifier: BSD-3-Clause * Copyright 2015 6WIND S.A. * Copyright 2015 Mellanox Technologies, Ltd */ #ifndef RTE_PMD_MLX5_DEFS_H_ #define RTE_PMD_MLX5_DEFS_H_ #include #include #include "mlx5_autoconf.h" /* Maximum number of simultaneous VLAN filters. */ #define MLX5_MAX_VLAN_IDS 128 /* * Request TX completion every time descriptors reach this threshold since * the previous request. Must be a power of two for performance reasons. */ #define MLX5_TX_COMP_THRESH 32u /* * Request TX completion every time the total number of WQEBBs used for inlining * packets exceeds the size of WQ divided by this divisor. Better to be power of * two for performance. */ #define MLX5_TX_COMP_THRESH_INLINE_DIV (1 << 3) /* * Maximal amount of normal completion CQEs * processed in one call of tx_burst() routine. */ #define MLX5_TX_COMP_MAX_CQE 2u /* Size of per-queue MR cache array for linear search. */ #define MLX5_MR_CACHE_N 8 /* Size of MR cache table for binary search. */ #define MLX5_MR_BTREE_CACHE_N 256 /* * If defined, only use software counters. The PMD will never ask the hardware * for these, and many of them won't be available. */ #ifndef MLX5_PMD_SOFT_COUNTERS #define MLX5_PMD_SOFT_COUNTERS 1 #endif /* Switch port ID parameters for bonding configurations. */ #define MLX5_PORT_ID_BONDING_PF_MASK 0xf #define MLX5_PORT_ID_BONDING_PF_SHIFT 12 /* Alarm timeout. */ #define MLX5_ALARM_TIMEOUT_US 100000 /* Maximum number of extended statistics counters. */ #define MLX5_MAX_XSTATS 32 /* Maximum Packet headers size (L2+L3+L4) for TSO. */ #define MLX5_MAX_TSO_HEADER (128u + 34u) /* Inline data size required by NICs. */ #define MLX5_INLINE_HSIZE_NONE 0 #define MLX5_INLINE_HSIZE_L2 (sizeof(struct rte_ether_hdr) + \ sizeof(struct rte_vlan_hdr)) #define MLX5_INLINE_HSIZE_L3 (MLX5_INLINE_HSIZE_L2 + \ sizeof(struct rte_ipv6_hdr)) #define MLX5_INLINE_HSIZE_L4 (MLX5_INLINE_HSIZE_L3 + \ sizeof(struct rte_tcp_hdr)) #define MLX5_INLINE_HSIZE_INNER_L2 (MLX5_INLINE_HSIZE_L3 + \ sizeof(struct rte_udp_hdr) + \ sizeof(struct rte_vxlan_hdr) + \ sizeof(struct rte_ether_hdr) + \ sizeof(struct rte_vlan_hdr)) #define MLX5_INLINE_HSIZE_INNER_L3 (MLX5_INLINE_HSIZE_INNER_L2 + \ sizeof(struct rte_ipv6_hdr)) #define MLX5_INLINE_HSIZE_INNER_L4 (MLX5_INLINE_HSIZE_INNER_L3 + \ sizeof(struct rte_tcp_hdr)) /* Threshold of buffer replenishment for vectorized Rx. */ #define MLX5_VPMD_RXQ_RPLNSH_THRESH(n) \ (RTE_MIN(MLX5_VPMD_RX_MAX_BURST, (unsigned int)(n) >> 2)) /* Maximum size of burst for vectorized Rx. */ #define MLX5_VPMD_RX_MAX_BURST 64U /* Recommended optimal burst size. */ #define MLX5_RX_DEFAULT_BURST 64U #define MLX5_TX_DEFAULT_BURST 64U /* Number of packets vectorized Rx can simultaneously process in a loop. */ #define MLX5_VPMD_DESCS_PER_LOOP 4 /* Mask of RSS on source only or destination only. */ #define MLX5_RSS_SRC_DST_ONLY (ETH_RSS_L3_SRC_ONLY | ETH_RSS_L3_DST_ONLY | \ ETH_RSS_L4_SRC_ONLY | ETH_RSS_L4_DST_ONLY) /* Supported RSS */ #define MLX5_RSS_HF_MASK (~(ETH_RSS_IP | ETH_RSS_UDP | ETH_RSS_TCP | \ MLX5_RSS_SRC_DST_ONLY)) /* Timeout in seconds to get a valid link status. */ #define MLX5_LINK_STATUS_TIMEOUT 10 /* Number of times to retry retrieving the physical link information. */ #define MLX5_GET_LINK_STATUS_RETRY_COUNT 3 /* Maximum number of UAR pages used by a port, * These are the size and mask for an array of mutexes used to synchronize * the access to port's UARs on platforms that do not support 64 bit writes. * In such systems it is possible to issue the 64 bits DoorBells through two * consecutive writes, each write 32 bits. The access to a UAR page (which can * be accessible by all threads in the process) must be synchronized * (for example, using a semaphore). Such a synchronization is not required * when ringing DoorBells on different UAR pages. * A port with 512 Tx queues uses 8, 4kBytes, UAR pages which are shared * among the ports. */ #define MLX5_UAR_PAGE_NUM_MAX 64 #define MLX5_UAR_PAGE_NUM_MASK ((MLX5_UAR_PAGE_NUM_MAX) - 1) /* Fields of memory mapping type in offset parameter of mmap() */ #define MLX5_UAR_MMAP_CMD_SHIFT 8 #define MLX5_UAR_MMAP_CMD_MASK 0xff /* Environment variable to control the doorbell register mapping. */ #define MLX5_SHUT_UP_BF "MLX5_SHUT_UP_BF" #if defined(RTE_ARCH_ARM64) #define MLX5_SHUT_UP_BF_DEFAULT "0" #else #define MLX5_SHUT_UP_BF_DEFAULT "1" #endif #ifndef HAVE_MLX5DV_MMAP_GET_NC_PAGES_CMD #define MLX5_MMAP_GET_NC_PAGES_CMD 3 #endif /* Log 2 of the default number of strides per WQE for Multi-Packet RQ. */ #define MLX5_MPRQ_STRIDE_NUM_N 6U /* Log 2 of the default size of a stride per WQE for Multi-Packet RQ. */ #define MLX5_MPRQ_STRIDE_SIZE_N 11U /* Two-byte shift is disabled for Multi-Packet RQ. */ #define MLX5_MPRQ_TWO_BYTE_SHIFT 0 /* * Minimum size of packet to be memcpy'd instead of being attached as an * external buffer. */ #define MLX5_MPRQ_MEMCPY_DEFAULT_LEN 128 /* Minimum number Rx queues to enable Multi-Packet RQ. */ #define MLX5_MPRQ_MIN_RXQS 12 /* Cache size of mempool for Multi-Packet RQ. */ #define MLX5_MPRQ_MP_CACHE_SZ 32U /* MLX5_DV_XMETA_EN supported values. */ #define MLX5_XMETA_MODE_LEGACY 0 #define MLX5_XMETA_MODE_META16 1 #define MLX5_XMETA_MODE_META32 2 /* Provide info on patrial hw miss. Implies MLX5_XMETA_MODE_META16 */ #define MLX5_XMETA_MODE_MISS_INFO 3 /* MLX5_TX_DB_NC supported values. */ #define MLX5_TXDB_CACHED 0 #define MLX5_TXDB_NCACHED 1 #define MLX5_TXDB_HEURISTIC 2 /* Tx accurate scheduling on timestamps parameters. */ #define MLX5_TXPP_WAIT_INIT_TS 1000ul /* How long to wait timestamp. */ #define MLX5_TXPP_CLKQ_SIZE 1 #define MLX5_TXPP_REARM ((1UL << MLX5_WQ_INDEX_WIDTH) / 4) #define MLX5_TXPP_REARM_SQ_SIZE (((1UL << MLX5_CQ_INDEX_WIDTH) / \ MLX5_TXPP_REARM) * 2) #define MLX5_TXPP_REARM_CQ_SIZE (MLX5_TXPP_REARM_SQ_SIZE / 2) /* The minimal size test packet to put into one WQE, padded by HW. */ #define MLX5_TXPP_TEST_PKT_SIZE (sizeof(struct rte_ether_hdr) + \ sizeof(struct rte_ipv4_hdr)) /* Size of the simple hash table for metadata register table. */ #define MLX5_FLOW_MREG_HTABLE_SZ 4096 #define MLX5_FLOW_MREG_HNAME "MARK_COPY_TABLE" #define MLX5_DEFAULT_COPY_ID UINT32_MAX /* Size of the simple hash table for header modify table. */ #define MLX5_FLOW_HDR_MODIFY_HTABLE_SZ (1 << 16) /* Size of the simple hash table for encap decap table. */ #define MLX5_FLOW_ENCAP_DECAP_HTABLE_SZ (1 << 16) /* Hairpin TX/RX queue configuration parameters. */ #define MLX5_HAIRPIN_QUEUE_STRIDE 6 #define MLX5_HAIRPIN_JUMBO_LOG_SIZE (14 + 2) /* Maximum number of shared actions supported by rte_flow */ #define MLX5_MAX_SHARED_ACTIONS 2 /* Definition of static_assert found in /usr/include/assert.h */ #ifndef HAVE_STATIC_ASSERT #define static_assert _Static_assert #endif #endif /* RTE_PMD_MLX5_DEFS_H_ */