numam-dpdk/drivers/net/hns3/hns3_dcb.h
Chengwen Feng 2ad146efb1 net/hns3: rename header guards
Currently, the hns3 driver uses _HNS3_XXX conditional compilation
macros to prevent duplicate header files. But in the C11 standard, all
identifiers starting with an underscore plus an uppercase letter are
always reserved. So this patch fixes it.

Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Dongdong Liu <liudongdong3@huawei.com>
2022-10-04 18:09:48 +02:00

219 lines
5.4 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright(c) 2018-2021 HiSilicon Limited.
*/
#ifndef HNS3_DCB_H
#define HNS3_DCB_H
#include <stdint.h>
#include <ethdev_driver.h>
#include <rte_ethdev.h>
#include "hns3_cmd.h"
#include "hns3_ethdev.h"
#define HNS3_ETHER_MAX_RATE 100000
/* MAC Pause */
#define HNS3_TX_MAC_PAUSE_EN_MSK BIT(0)
#define HNS3_RX_MAC_PAUSE_EN_MSK BIT(1)
#define HNS3_DEFAULT_PAUSE_TRANS_GAP 0x18
#define HNS3_DEFAULT_PAUSE_TRANS_TIME 0xFFFF
/* SP or DWRR */
#define HNS3_DCB_TX_SCHD_DWRR_MSK BIT(0)
#define HNS3_DCB_TX_SCHD_SP_MSK 0xFE
enum hns3_shap_bucket {
HNS3_DCB_SHAP_C_BUCKET = 0,
HNS3_DCB_SHAP_P_BUCKET,
};
struct hns3_priority_weight_cmd {
uint8_t pri_id;
uint8_t dwrr;
uint8_t rsvd[22];
};
struct hns3_qs_weight_cmd {
uint16_t qs_id;
uint8_t dwrr;
uint8_t rsvd[21];
};
struct hns3_pg_weight_cmd {
uint8_t pg_id;
uint8_t dwrr;
uint8_t rsvd[22];
};
struct hns3_ets_tc_weight_cmd {
uint8_t tc_weight[HNS3_MAX_TC_NUM];
uint8_t weight_offset;
uint8_t rsvd[15];
};
struct hns3_qs_to_pri_link_cmd {
uint16_t qs_id;
uint16_t rsvd;
uint8_t priority;
#define HNS3_DCB_QS_PRI_LINK_VLD_MSK BIT(0)
#define HNS3_DCB_QS_ID_L_MSK GENMASK(9, 0)
#define HNS3_DCB_QS_ID_L_S 0
#define HNS3_DCB_QS_ID_H_MSK GENMASK(14, 10)
#define HNS3_DCB_QS_ID_H_S 10
#define HNS3_DCB_QS_ID_H_EXT_S 11
#define HNS3_DCB_QS_ID_H_EXT_MSK GENMASK(15, 11)
uint8_t link_vld;
uint8_t rsvd1[18];
};
struct hns3_nq_to_qs_link_cmd {
uint16_t nq_id;
uint16_t rsvd;
#define HNS3_DCB_Q_QS_LINK_VLD_MSK BIT(10)
uint16_t qset_id;
uint8_t rsvd1[18];
};
#define HNS3_DCB_SHAP_IR_B_MSK GENMASK(7, 0)
#define HNS3_DCB_SHAP_IR_B_LSH 0
#define HNS3_DCB_SHAP_IR_U_MSK GENMASK(11, 8)
#define HNS3_DCB_SHAP_IR_U_LSH 8
#define HNS3_DCB_SHAP_IR_S_MSK GENMASK(15, 12)
#define HNS3_DCB_SHAP_IR_S_LSH 12
#define HNS3_DCB_SHAP_BS_B_MSK GENMASK(20, 16)
#define HNS3_DCB_SHAP_BS_B_LSH 16
#define HNS3_DCB_SHAP_BS_S_MSK GENMASK(25, 21)
#define HNS3_DCB_SHAP_BS_S_LSH 21
/*
* For more flexible selection of shapping algorithm in different network
* engine, the algorithm calculating shapping parameter is moved to firmware to
* execute. Bit HNS3_TM_RATE_VLD_B of flag field in hns3_pri_shapping_cmd,
* hns3_pg_shapping_cmd or hns3_port_shapping_cmd is set to 1 to require
* firmware to recalculate shapping parameters. However, whether the parameters
* are recalculated depends on the firmware version. If firmware doesn't support
* the calculation of shapping parameters, such as on network engine with
* revision id 0x21, the value driver calculated will be used to configure to
* hardware. On the contrary, firmware ignores configuration of driver
* and recalculates the parameter.
*/
#define HNS3_TM_RATE_VLD_B 0
struct hns3_pri_shapping_cmd {
uint8_t pri_id;
uint8_t rsvd[3];
uint32_t pri_shapping_para;
uint8_t flag;
uint8_t rsvd1[3];
uint32_t pri_rate; /* Unit Mbps */
uint8_t rsvd2[8];
};
struct hns3_pg_shapping_cmd {
uint8_t pg_id;
uint8_t rsvd[3];
uint32_t pg_shapping_para;
uint8_t flag;
uint8_t rsvd1[3];
uint32_t pg_rate; /* Unit Mbps */
uint8_t rsvd2[8];
};
struct hns3_port_shapping_cmd {
uint32_t port_shapping_para;
uint8_t flag;
uint8_t rsvd[3];
uint32_t port_rate; /* Unit Mbps */
uint8_t rsvd1[12];
};
#define HNS3_BP_GRP_NUM 32
#define HNS3_BP_SUB_GRP_ID_S 0
#define HNS3_BP_SUB_GRP_ID_M GENMASK(4, 0)
#define HNS3_BP_GRP_ID_S 5
#define HNS3_BP_GRP_ID_M GENMASK(9, 5)
struct hns3_bp_to_qs_map_cmd {
uint8_t tc_id;
uint8_t rsvd[2];
uint8_t qs_group_id;
uint32_t qs_bit_map;
uint32_t rsvd1[4];
};
struct hns3_pfc_en_cmd {
uint8_t tx_rx_en_bitmap;
uint8_t pri_en_bitmap;
uint8_t rsvd[22];
};
struct hns3_cfg_pause_param_cmd {
uint8_t mac_addr[RTE_ETHER_ADDR_LEN];
uint8_t pause_trans_gap;
uint8_t rsvd;
uint16_t pause_trans_time;
uint8_t rsvd1[6];
/* extra mac address to do double check for pause frame */
uint8_t mac_addr_extra[RTE_ETHER_ADDR_LEN];
uint16_t rsvd2;
};
struct hns3_pg_to_pri_link_cmd {
uint8_t pg_id;
uint8_t rsvd1[3];
uint8_t pri_bit_map;
uint8_t rsvd2[19];
};
enum hns3_shaper_level {
HNS3_SHAPER_LVL_PRI = 0,
HNS3_SHAPER_LVL_PG = 1,
HNS3_SHAPER_LVL_PORT = 2,
HNS3_SHAPER_LVL_QSET = 3,
HNS3_SHAPER_LVL_CNT = 4,
HNS3_SHAPER_LVL_VF = 0,
HNS3_SHAPER_LVL_PF = 1,
};
struct hns3_shaper_parameter {
uint32_t ir_b; /* IR_B parameter of IR shaper */
uint32_t ir_u; /* IR_U parameter of IR shaper */
uint32_t ir_s; /* IR_S parameter of IR shaper */
};
#define hns3_dcb_set_field(dest, string, val) \
hns3_set_field((dest), \
(HNS3_DCB_SHAP_##string##_MSK), \
(HNS3_DCB_SHAP_##string##_LSH), val)
#define hns3_dcb_get_field(src, string) \
hns3_get_field((src), (HNS3_DCB_SHAP_##string##_MSK), \
(HNS3_DCB_SHAP_##string##_LSH))
int hns3_pause_addr_cfg(struct hns3_hw *hw, const uint8_t *mac_addr);
int hns3_dcb_configure(struct hns3_adapter *hns);
int hns3_dcb_init(struct hns3_hw *hw);
int hns3_dcb_init_hw(struct hns3_hw *hw);
int hns3_dcb_info_init(struct hns3_hw *hw);
int hns3_fc_enable(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf);
int hns3_dcb_pfc_enable(struct rte_eth_dev *dev,
struct rte_eth_pfc_conf *pfc_conf);
int hns3_queue_to_tc_mapping(struct hns3_hw *hw, uint16_t nb_rx_q,
uint16_t nb_tx_q);
int hns3_update_queue_map_configure(struct hns3_adapter *hns);
int hns3_port_shaper_update(struct hns3_hw *hw, uint32_t speed);
uint8_t hns3_txq_mapped_tc_get(struct hns3_hw *hw, uint16_t txq_no);
#endif /* HNS3_DCB_H */