5630257fcc
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com> Acked-by: Bruce Richardson <bruce.richardson@intel.com>
75 lines
3.0 KiB
ReStructuredText
75 lines
3.0 KiB
ReStructuredText
.. SPDX-License-Identifier: BSD-3-Clause
|
|
Copyright(c) 2017 Intel Corporation.
|
|
|
|
Traffic Metering and Policing API
|
|
=================================
|
|
|
|
|
|
Overview
|
|
--------
|
|
|
|
This is the generic API for the Quality of Service (QoS) Traffic Metering and
|
|
Policing (MTR) of Ethernet devices. This API is agnostic of the underlying HW,
|
|
SW or mixed HW-SW implementation.
|
|
|
|
The main features are:
|
|
|
|
* Part of DPDK rte_ethdev API
|
|
* Capability query API
|
|
* Metering algorithms: RFC 2697 Single Rate Three Color Marker (srTCM), RFC 2698
|
|
and RFC 4115 Two Rate Three Color Marker (trTCM)
|
|
* Policer actions (per meter output color): recolor, drop
|
|
* Statistics (per policer output color)
|
|
|
|
Configuration steps
|
|
-------------------
|
|
|
|
The metering and policing stage typically sits on top of flow classification,
|
|
which is why the MTR objects are enabled through a special "meter" action.
|
|
|
|
The MTR objects are created and updated in their own name space (``rte_mtr``)
|
|
within the ``librte_ether`` library. Whether an MTR object is private to a
|
|
flow or potentially shared by several flows has to be specified at its
|
|
creation time.
|
|
|
|
Once successfully created, an MTR object is hooked into the RX processing path
|
|
of the Ethernet device by linking it to one or several flows through the
|
|
dedicated "meter" flow action. One or several "meter" actions can be registered
|
|
for the same flow. An MTR object can only be destroyed if there are no flows
|
|
using it.
|
|
|
|
Run-time processing
|
|
-------------------
|
|
|
|
Traffic metering determines the color for the current packet (green, yellow,
|
|
red) based on the previous history for this flow as maintained by the MTR
|
|
object. The policer can do nothing, override the color the packet or drop the
|
|
packet. Statistics counters are maintained for MTR object, as configured.
|
|
|
|
The processing done for each input packet hitting an MTR object is:
|
|
|
|
* Traffic metering: The packet is assigned a color (the meter output color)
|
|
based on the previous traffic history reflected in the current state of the
|
|
MTR object, according to the specific traffic metering algorithm. The
|
|
traffic metering algorithm can typically work in color aware mode, in which
|
|
case the input packet already has an initial color (the input color), or in
|
|
color blind mode, which is equivalent to considering all input packets
|
|
initially colored as green.
|
|
|
|
* Policing: There is a separate policer action configured for each meter
|
|
output color, which can:
|
|
|
|
* Drop the packet.
|
|
|
|
* Keep the same packet color: the policer output color matches the meter
|
|
output color (essentially a no-op action).
|
|
|
|
* Recolor the packet: the policer output color is set to a different color
|
|
than the meter output color. The policer output color is the output color
|
|
of the packet, which is set in the packet meta-data (i.e. struct
|
|
``rte_mbuf::sched::color``).
|
|
|
|
* Statistics: The set of counters maintained for each MTR object is
|
|
configurable and subject to the implementation support. This set includes
|
|
the number of packets and bytes dropped or passed for each output color.
|