numam-dpdk/examples/l3fwd/l3fwd_common.h
Jianbo Liu 66d8bc009c examples/l3fwd: extract common code from multi packet send
Keep x86 related code in l3fwd_sse.h, and move common code to
l3fwd_common.h, which will be used by other Archs.

Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
2017-07-04 17:41:53 +02:00

294 lines
7.5 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2016 Intel Corporation. All rights reserved.
* Copyright(c) 2017, Linaro Limited
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _L3FWD_COMMON_H_
#define _L3FWD_COMMON_H_
#ifdef DO_RFC_1812_CHECKS
#define IPV4_MIN_VER_IHL 0x45
#define IPV4_MAX_VER_IHL 0x4f
#define IPV4_MAX_VER_IHL_DIFF (IPV4_MAX_VER_IHL - IPV4_MIN_VER_IHL)
/* Minimum value of IPV4 total length (20B) in network byte order. */
#define IPV4_MIN_LEN_BE (sizeof(struct ipv4_hdr) << 8)
/*
* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2:
* - The IP version number must be 4.
* - The IP header length field must be large enough to hold the
* minimum length legal IP datagram (20 bytes = 5 words).
* - The IP total length field must be large enough to hold the IP
* datagram header, whose length is specified in the IP header length
* field.
* If we encounter invalid IPV4 packet, then set destination port for it
* to BAD_PORT value.
*/
static __rte_always_inline void
rfc1812_process(struct ipv4_hdr *ipv4_hdr, uint16_t *dp, uint32_t ptype)
{
uint8_t ihl;
if (RTE_ETH_IS_IPV4_HDR(ptype)) {
ihl = ipv4_hdr->version_ihl - IPV4_MIN_VER_IHL;
ipv4_hdr->time_to_live--;
ipv4_hdr->hdr_checksum++;
if (ihl > IPV4_MAX_VER_IHL_DIFF ||
((uint8_t)ipv4_hdr->total_length == 0 &&
ipv4_hdr->total_length < IPV4_MIN_LEN_BE))
dp[0] = BAD_PORT;
}
}
#else
#define rfc1812_process(mb, dp, ptype) do { } while (0)
#endif /* DO_RFC_1812_CHECKS */
/*
* We group consecutive packets with the same destionation port into one burst.
* To avoid extra latency this is done together with some other packet
* processing, but after we made a final decision about packet's destination.
* To do this we maintain:
* pnum - array of number of consecutive packets with the same dest port for
* each packet in the input burst.
* lp - pointer to the last updated element in the pnum.
* dlp - dest port value lp corresponds to.
*/
#define GRPSZ (1 << FWDSTEP)
#define GRPMSK (GRPSZ - 1)
#define GROUP_PORT_STEP(dlp, dcp, lp, pn, idx) do { \
if (likely((dlp) == (dcp)[(idx)])) { \
(lp)[0]++; \
} else { \
(dlp) = (dcp)[idx]; \
(lp) = (pn) + (idx); \
(lp)[0] = 1; \
} \
} while (0)
static const struct {
uint64_t pnum; /* prebuild 4 values for pnum[]. */
int32_t idx; /* index for new last updated elemnet. */
uint16_t lpv; /* add value to the last updated element. */
} gptbl[GRPSZ] = {
{
/* 0: a != b, b != c, c != d, d != e */
.pnum = UINT64_C(0x0001000100010001),
.idx = 4,
.lpv = 0,
},
{
/* 1: a == b, b != c, c != d, d != e */
.pnum = UINT64_C(0x0001000100010002),
.idx = 4,
.lpv = 1,
},
{
/* 2: a != b, b == c, c != d, d != e */
.pnum = UINT64_C(0x0001000100020001),
.idx = 4,
.lpv = 0,
},
{
/* 3: a == b, b == c, c != d, d != e */
.pnum = UINT64_C(0x0001000100020003),
.idx = 4,
.lpv = 2,
},
{
/* 4: a != b, b != c, c == d, d != e */
.pnum = UINT64_C(0x0001000200010001),
.idx = 4,
.lpv = 0,
},
{
/* 5: a == b, b != c, c == d, d != e */
.pnum = UINT64_C(0x0001000200010002),
.idx = 4,
.lpv = 1,
},
{
/* 6: a != b, b == c, c == d, d != e */
.pnum = UINT64_C(0x0001000200030001),
.idx = 4,
.lpv = 0,
},
{
/* 7: a == b, b == c, c == d, d != e */
.pnum = UINT64_C(0x0001000200030004),
.idx = 4,
.lpv = 3,
},
{
/* 8: a != b, b != c, c != d, d == e */
.pnum = UINT64_C(0x0002000100010001),
.idx = 3,
.lpv = 0,
},
{
/* 9: a == b, b != c, c != d, d == e */
.pnum = UINT64_C(0x0002000100010002),
.idx = 3,
.lpv = 1,
},
{
/* 0xa: a != b, b == c, c != d, d == e */
.pnum = UINT64_C(0x0002000100020001),
.idx = 3,
.lpv = 0,
},
{
/* 0xb: a == b, b == c, c != d, d == e */
.pnum = UINT64_C(0x0002000100020003),
.idx = 3,
.lpv = 2,
},
{
/* 0xc: a != b, b != c, c == d, d == e */
.pnum = UINT64_C(0x0002000300010001),
.idx = 2,
.lpv = 0,
},
{
/* 0xd: a == b, b != c, c == d, d == e */
.pnum = UINT64_C(0x0002000300010002),
.idx = 2,
.lpv = 1,
},
{
/* 0xe: a != b, b == c, c == d, d == e */
.pnum = UINT64_C(0x0002000300040001),
.idx = 1,
.lpv = 0,
},
{
/* 0xf: a == b, b == c, c == d, d == e */
.pnum = UINT64_C(0x0002000300040005),
.idx = 0,
.lpv = 4,
},
};
static __rte_always_inline void
send_packetsx4(struct lcore_conf *qconf, uint8_t port, struct rte_mbuf *m[],
uint32_t num)
{
uint32_t len, j, n;
len = qconf->tx_mbufs[port].len;
/*
* If TX buffer for that queue is empty, and we have enough packets,
* then send them straightway.
*/
if (num >= MAX_TX_BURST && len == 0) {
n = rte_eth_tx_burst(port, qconf->tx_queue_id[port], m, num);
if (unlikely(n < num)) {
do {
rte_pktmbuf_free(m[n]);
} while (++n < num);
}
return;
}
/*
* Put packets into TX buffer for that queue.
*/
n = len + num;
n = (n > MAX_PKT_BURST) ? MAX_PKT_BURST - len : num;
j = 0;
switch (n % FWDSTEP) {
while (j < n) {
case 0:
qconf->tx_mbufs[port].m_table[len + j] = m[j];
j++;
/* fallthrough */
case 3:
qconf->tx_mbufs[port].m_table[len + j] = m[j];
j++;
/* fallthrough */
case 2:
qconf->tx_mbufs[port].m_table[len + j] = m[j];
j++;
/* fallthrough */
case 1:
qconf->tx_mbufs[port].m_table[len + j] = m[j];
j++;
}
}
len += n;
/* enough pkts to be sent */
if (unlikely(len == MAX_PKT_BURST)) {
send_burst(qconf, MAX_PKT_BURST, port);
/* copy rest of the packets into the TX buffer. */
len = num - n;
j = 0;
switch (len % FWDSTEP) {
while (j < len) {
case 0:
qconf->tx_mbufs[port].m_table[j] = m[n + j];
j++;
/* fallthrough */
case 3:
qconf->tx_mbufs[port].m_table[j] = m[n + j];
j++;
/* fallthrough */
case 2:
qconf->tx_mbufs[port].m_table[j] = m[n + j];
j++;
/* fallthrough */
case 1:
qconf->tx_mbufs[port].m_table[j] = m[n + j];
j++;
}
}
}
qconf->tx_mbufs[port].len = len;
}
#endif /* _L3FWD_COMMON_H_ */