numam-dpdk/examples/ipsec-secgw/ipsec-secgw.h
Rahul Bhansali d8d51d4f9b examples/ipsec-secgw: support per SA HW reassembly
This add the support of hardware reassembly per SA basis.
In SA rule, new parameter reassembly_en is added to enable
HW reassembly per SA.
For example:
sa in <idx> aead_algo <algo> aead_key <key> mode ipv4-tunnel src <ip>
dst <ip> type inline-protocol-offload port_id <id> reassembly_en

Stats counter frag_dropped will represent the number of fragment
drop in case of reassembly failures.

Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
2022-10-29 13:01:41 +02:00

244 lines
5.3 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright (C) 2020 Marvell International Ltd.
*/
#ifndef _IPSEC_SECGW_H_
#define _IPSEC_SECGW_H_
#include <stdbool.h>
#include <rte_ethdev.h>
#define MAX_RX_QUEUE_PER_LCORE 16
#define NB_SOCKETS 4
#define MAX_PKT_BURST 32
#define MAX_PKT_BURST_VEC 256
#define MAX_PKTS \
((MAX_PKT_BURST_VEC > MAX_PKT_BURST ? \
MAX_PKT_BURST_VEC : MAX_PKT_BURST) * 2)
#define RTE_LOGTYPE_IPSEC RTE_LOGTYPE_USER1
#if RTE_BYTE_ORDER != RTE_LITTLE_ENDIAN
#define __BYTES_TO_UINT64(a, b, c, d, e, f, g, h) \
(((uint64_t)((a) & 0xff) << 56) | \
((uint64_t)((b) & 0xff) << 48) | \
((uint64_t)((c) & 0xff) << 40) | \
((uint64_t)((d) & 0xff) << 32) | \
((uint64_t)((e) & 0xff) << 24) | \
((uint64_t)((f) & 0xff) << 16) | \
((uint64_t)((g) & 0xff) << 8) | \
((uint64_t)(h) & 0xff))
#else
#define __BYTES_TO_UINT64(a, b, c, d, e, f, g, h) \
(((uint64_t)((h) & 0xff) << 56) | \
((uint64_t)((g) & 0xff) << 48) | \
((uint64_t)((f) & 0xff) << 40) | \
((uint64_t)((e) & 0xff) << 32) | \
((uint64_t)((d) & 0xff) << 24) | \
((uint64_t)((c) & 0xff) << 16) | \
((uint64_t)((b) & 0xff) << 8) | \
((uint64_t)(a) & 0xff))
#endif
#define uint32_t_to_char(ip, a, b, c, d) do {\
*a = (uint8_t)(ip >> 24 & 0xff);\
*b = (uint8_t)(ip >> 16 & 0xff);\
*c = (uint8_t)(ip >> 8 & 0xff);\
*d = (uint8_t)(ip & 0xff);\
} while (0)
#define ETHADDR(a, b, c, d, e, f) (__BYTES_TO_UINT64(a, b, c, d, e, f, 0, 0))
#define IPSEC_NAT_T_PORT 4500
#define MBUF_PTYPE_TUNNEL_ESP_IN_UDP (RTE_PTYPE_TUNNEL_ESP | RTE_PTYPE_L4_UDP)
struct traffic_type {
uint32_t num;
struct rte_mbuf *pkts[MAX_PKTS];
const uint8_t *data[MAX_PKTS];
void *saptr[MAX_PKTS];
uint32_t res[MAX_PKTS];
} __rte_cache_aligned;
struct ipsec_traffic {
struct traffic_type ipsec;
struct traffic_type ip4;
struct traffic_type ip6;
};
/* Fields optimized for devices without burst */
struct traffic_type_nb {
const uint8_t *data;
struct rte_mbuf *pkt;
uint32_t res;
uint32_t num;
};
struct ipsec_traffic_nb {
struct traffic_type_nb ipsec;
struct traffic_type_nb ip4;
struct traffic_type_nb ip6;
};
/* port/source ethernet addr and destination ethernet addr */
struct ethaddr_info {
uint64_t src, dst;
};
struct ipsec_spd_stats {
uint64_t protect;
uint64_t bypass;
uint64_t discard;
};
struct ipsec_sa_stats {
uint64_t hit;
uint64_t miss;
};
struct ipsec_core_statistics {
uint64_t tx;
uint64_t rx;
uint64_t rx_call;
uint64_t tx_call;
uint64_t dropped;
uint64_t frag_dropped;
uint64_t burst_rx;
struct {
struct ipsec_spd_stats spd4;
struct ipsec_spd_stats spd6;
struct ipsec_sa_stats sad;
} outbound;
struct {
struct ipsec_spd_stats spd4;
struct ipsec_spd_stats spd6;
struct ipsec_sa_stats sad;
} inbound;
struct {
uint64_t miss;
} lpm4;
struct {
uint64_t miss;
} lpm6;
} __rte_cache_aligned;
extern struct ipsec_core_statistics core_statistics[RTE_MAX_LCORE];
extern struct ethaddr_info ethaddr_tbl[RTE_MAX_ETHPORTS];
/* Port mask to identify the unprotected ports */
extern uint32_t unprotected_port_mask;
/* Index of SA in single mode */
extern uint32_t single_sa_idx;
extern uint32_t single_sa;
extern volatile bool force_quit;
extern uint32_t nb_bufs_in_pool;
extern bool per_port_pool;
extern int ip_reassembly_dynfield_offset;
extern uint64_t ip_reassembly_dynflag;
extern uint32_t mtu_size;
extern uint32_t frag_tbl_sz;
extern uint32_t qp_desc_nb;
#define SS_F (1U << 0) /* Single SA mode */
#define INL_PR_F (1U << 1) /* Inline Protocol */
#define INL_CR_F (1U << 2) /* Inline Crypto */
#define LA_PR_F (1U << 3) /* Lookaside Protocol */
#define LA_ANY_F (1U << 4) /* Lookaside Any */
#define MAX_F (LA_ANY_F << 1)
extern uint16_t wrkr_flags;
static inline uint8_t
is_unprotected_port(uint16_t port_id)
{
return unprotected_port_mask & (1 << port_id);
}
static inline void
core_stats_update_rx(int n)
{
int lcore_id = rte_lcore_id();
core_statistics[lcore_id].rx += n;
core_statistics[lcore_id].rx_call++;
if (n == MAX_PKT_BURST)
core_statistics[lcore_id].burst_rx += n;
}
static inline void
core_stats_update_tx(int n)
{
int lcore_id = rte_lcore_id();
core_statistics[lcore_id].tx += n;
core_statistics[lcore_id].tx_call++;
}
static inline void
core_stats_update_drop(int n)
{
int lcore_id = rte_lcore_id();
core_statistics[lcore_id].dropped += n;
}
static inline void
core_stats_update_frag_drop(int n)
{
int lcore_id = rte_lcore_id();
core_statistics[lcore_id].frag_dropped += n;
}
static inline int
is_ip_reassembly_incomplete(struct rte_mbuf *mbuf)
{
if (ip_reassembly_dynflag == 0)
return -1;
return (mbuf->ol_flags & ip_reassembly_dynflag) != 0;
}
static inline void
free_reassembly_fail_pkt(struct rte_mbuf *mb)
{
if (ip_reassembly_dynfield_offset >= 0) {
rte_eth_ip_reassembly_dynfield_t dynfield;
uint32_t frag_cnt = 0;
while (mb) {
dynfield = *RTE_MBUF_DYNFIELD(mb,
ip_reassembly_dynfield_offset,
rte_eth_ip_reassembly_dynfield_t *);
rte_pktmbuf_free(mb);
mb = dynfield.next_frag;
frag_cnt++;
}
core_stats_update_frag_drop(frag_cnt);
} else {
rte_pktmbuf_free(mb);
core_stats_update_drop(1);
}
}
/* helper routine to free bulk of packets */
static inline void
free_pkts(struct rte_mbuf *mb[], uint32_t n)
{
uint32_t i;
for (i = 0; i != n; i++)
rte_pktmbuf_free(mb[i]);
core_stats_update_drop(n);
}
#endif /* _IPSEC_SECGW_H_ */